Grzegorz Blach [Sat, 21 Sep 2019 10:31:42 +0000 (10:31 +0000)]
package/python-rpi-ws281x: new package
Userspace Raspberry Pi PWM/PCM/SPI library for SK6812 and WS281X LEDs.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bernd Kuhls [Sat, 21 Sep 2019 13:31:04 +0000 (15:31 +0200)]
package/ffmpeg: bump version to 4.2.1
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fabrice Fontaine [Sat, 21 Sep 2019 16:54:52 +0000 (18:54 +0200)]
package/gengetopt: bump to version 2.23
- Remove patch (not needed since
https://git.savannah.gnu.org/cgit/gengetopt.git/commit/?id=
9769f643d2e21379b8f7a3fd52ef77184fa753f6)
- Enable parallel build (fixed since
https://git.savannah.gnu.org/cgit/gengetopt.git/commit/?id=
8e6fa4d9d63c680b84ba872e8e581eb01ae3bc09)
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sergey Matyukevich [Sat, 21 Sep 2019 15:00:08 +0000 (18:00 +0300)]
configs/solidrun_macchiatobin_mainline: bump versions of BSP components
Bump Linux to 5.2, U-Boot to 2019.07, and ATF to armada-18.12.2.
Updated ATF uses updated binaries-marvell package which now
provides common firmware supporting both A7K and A8K. So no
need to specify platform for binaries-marvell anymore.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sergey Matyukevich [Sat, 21 Sep 2019 15:00:07 +0000 (18:00 +0300)]
configs/solidrun_clearfog_gt_8k: bump versions of BSP components
Bump Linux to 5.2, U-Boot to 2019.07, and ATF to armada-18.12.2.
Updated ATF uses updated binaries-marvell package which now
provides common firmware supporting both A7K and A8K. So no
need to specify platform for binaries-marvell anymore.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sergey Matyukevich [Sat, 21 Sep 2019 15:00:06 +0000 (18:00 +0300)]
boot/mv-ddr-marvell: bump version to armada-18.12
Bump version of Marvell DDR training software. This update accompanies
update of the ARM Trusted Firmware used on Marvell A8K platforms.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sergey Matyukevich [Sat, 21 Sep 2019 15:00:05 +0000 (18:00 +0300)]
binaries-marvell: bump version and switch to common firmware
Since release 18.12 binaries-marvell repository provides
common firmware supporting both A7K and A8K SoC families.
This commit bumps package version to 18.12 and removes
platform specific binary selections from Config.in.
Single firmware image suitable for both A7K and A8K
platforms is now specified in mk file explicitely.
Legacy handling is not needed, as configs which did have
the option set will continue to work without change.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Arnout:
- Remove BINARIES_MARVELL_IMAGE entirely;
- Add remark about legacy handling;
- Remove the deprecated option from the defconfigs and test that use
it.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Asaf Kahlon [Sat, 21 Sep 2019 14:49:33 +0000 (17:49 +0300)]
DEVELOPERS: add Asaf Kahlon for collectd
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sergey Matyukevich [Mon, 9 Sep 2019 20:20:34 +0000 (23:20 +0300)]
package/wpa_supplicant: fix AP mode settings
New wpa_supplicant v2.9 enables by default AP, P2P, WIFI_DISPLAY
features in defconfig. However these features make sense only for
wpa_supplicant drivers supporting AP mode.
That is why, for consistent configuration, these features should
be explicitely disabled in wpa_supplicant .config file unless
they are requested by Config.in options.
Note that at the moment AP support in Buildroot can be enabled
only for NL80211 driver.
Fixes:
http://autobuild.buildroot.net/results/
d37672374db935ac29953263ec68a2786ee65cc2/
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sergey Matyukevich [Mon, 9 Sep 2019 20:20:33 +0000 (23:20 +0300)]
package/hostapd: add Config.in option for WPA3 support
New hostapd v2.9 supports WPA3 features such as OWE, SAE, DPP.
Those features are disabled by default in defconfig, so no
dependency from openssl is requried unless WPA3 support
is enabled.
This patch adds Config.in option for WPA3 support in hostapd.
When this option is selected, libopenssl is also selected and
WPA3 features including OWE, SAE, DPP are enabled in hostapd
.config file. When this option is deselected, then WPA3
options are disabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sergey Matyukevich [Mon, 9 Sep 2019 20:20:32 +0000 (23:20 +0300)]
package/wpa_supplicant: add Config.in option for WPA3 support
New wpa_supplicant v2.9 enables by default WPA3 features in defconfig.
Meanwhile building those features requires openssl.
This patch adds Config.in option for WPA3 support in wpa_supplicant.
When this option is selected, libopenssl is also selected and WPA3
features OWE, SAE, DPP are enabled in wpa_supplicant .config file.
When this feature is deselected, then all the above WPA3 options
are disabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Romain Naour [Fri, 20 Sep 2019 16:38:43 +0000 (18:38 +0200)]
package/mesa3d: add a new option to enable GLX support
When switching to meson build system, enabling GLX support
require at least one DRI or Gallium dirver.
So add a dependency on BR2_PACKAGE_MESA3D_DRIVER for
BR2_PACKAGE_MESA3D_OPENGL_GLX option.
quoting the meson build system:
"dri based GLX requires at least one DRI driver." [1]
"Even when building just gallium drivers the user probably wants dri." [2]
[1] https://cgit.freedesktop.org/mesa/mesa/tree/meson.build?h=19.0#n340
[2] https://cgit.freedesktop.org/mesa/mesa/tree/meson.build?h=19.0#n266
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Bernd: moved x11 dependencies from glx condition to xorg7 condition to
fix build error with enabled egl without glx
BR2_PACKAGE_HAS_LIBGL needs to depend on BR2_PACKAGE_MESA3D_OPENGL_GLX]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: small changes to Config.in help text and menus]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Romain Naour [Fri, 20 Sep 2019 16:38:42 +0000 (18:38 +0200)]
package/mesa3d: Gallium xa state tracker is only available for nouveau and svga Gallium drivers
i915 and freedreno Gallium drivers are not currently supported by mesa3d package.
https://cgit.freedesktop.org/mesa/mesa/commit/?id=
0ba909f0f111824223bc38563d1a6bc73e69c2cc
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Romain Naour [Fri, 20 Sep 2019 16:38:40 +0000 (18:38 +0200)]
package/mesa3d: Only one swrast provider can be built
https://cgit.freedesktop.org/mesa/mesa/commit/?id=
de24d61765011ed4bfc169b8ad8cf67e86b1f3bd
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Romain Naour [Fri, 20 Sep 2019 16:38:39 +0000 (18:38 +0200)]
package/mesa3d: add OSMesa classic needs dri swrast
The meson build system now check if dri swrast is enabled
when OSMesa classic is enabled.
See:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=
cbbd5bb889a2c271a504c379f36a7cb717a85af4
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Romain Naour [Fri, 20 Sep 2019 16:38:38 +0000 (18:38 +0200)]
package/mesa3d: rename OSMesa option
This option is renamed in order to match the naming used by the
meson buildsystem.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Thuan Ho [Fri, 20 Sep 2019 15:05:08 +0000 (22:05 +0700)]
package/connman: fix legacy wpa_supplicant dbus select
Remove '_NEW' from 'select BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW' in
Config.in.
Wpa_supplicant dbus support option has been renamed from
BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW to BR2_PACKAGE_WPA_SUPPLICANT_DBUS
in the bump to v2.9 (
f2ffdbee2aca0ca2bde469475c180d60cb934beb).
While connman package, which depends on wpa_supplicant, has not been
updated.
This patch will fix legacy build error.
Signed-off-by: Thuan Ho <sandwichdoge@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 12:43:45 +0000 (12:43 +0000)]
package/xinetd: add missing hash for COPYRIGHT file
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 12:43:43 +0000 (12:43 +0000)]
package/tinyxml: add missing hash for README file
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 12:43:41 +0000 (12:43 +0000)]
package/rsyslog: add missing hashes for COPYING.* files
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 12:43:38 +0000 (12:43 +0000)]
package/python-pyzmq: add missing hashes for COPYING.(BSD|LESSER) files
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 12:43:36 +0000 (12:43 +0000)]
package/python-pyasn: add missing hash for LICENSE.txt file
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 12:43:34 +0000 (12:43 +0000)]
package/pppd: add missing file hashes
for :
* pppd/tdb.c
* pppd/plugins/pppoatm/COPYING
* pppdump/bsd-comp.c
* pppd/ccp.c
* pppd/plugins/passprompt.c
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 12:43:29 +0000 (12:43 +0000)]
package/nss-pam-ldapd: add missing hash for COPYING file
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 12:43:25 +0000 (12:43 +0000)]
package/nss-mdns: add missing hash for LICENSE file
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 12:43:22 +0000 (12:43 +0000)]
package/kmod: add missing hash for COPYING file
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Fri, 20 Sep 2019 11:30:02 +0000 (13:30 +0200)]
package/joe: license is GPL-2.0+
Joe changed the COPYING file from GPL-1.0 to GPL-2.0 in the development
leading up to 3.8:
https://sourceforge.net/p/joe-editor/mercurial/ci/
d731f9b3794bc4c896f2efa1c97ac2c82c3365ac/
So change the license to GPL-2.0+
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Nicolas Carrier [Fri, 20 Sep 2019 11:45:01 +0000 (11:45 +0000)]
package/kf5: fix _LICENSE_FILE -> _LICENSE_FILES typos
This fixes WARNINGs in make legal-info of the kind:
WARNING: kf5-extra-cmake-modules-5.47.0: cannot save license
(KF5_EXTRA_CMAKE_MODULES_LICENSE_FILES not defined)
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Fri, 20 Sep 2019 07:23:43 +0000 (09:23 +0200)]
package/bwm-ng: license is GPL-2.0+
The source files contain the "(at your option) any later version" text, so
change the licese to GPL-2.0+.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Fri, 20 Sep 2019 07:21:22 +0000 (09:21 +0200)]
package/ifplugd: license is GPL-2.0+
The source files contain the "(at your option) any later version" text and
the website states:
License
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option)
any later version.
http://0pointer.de/lennart/projects/ifplugd/
So change the license to GPL-2.0+
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Fri, 20 Sep 2019 06:09:58 +0000 (08:09 +0200)]
package/docker-proxy: bump version to
55685ba49593
Which is the version used by docker 18.09.9:
https://github.com/docker/engine/commit/
0a3767c7e9803f0a595a07b0548e99d60e861062
Also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Fri, 20 Sep 2019 06:09:57 +0000 (08:09 +0200)]
package/docker-cli: bump version to 18.09.9
Includes a number of post-18.09.7 bugfixes and to keep in sync with the
docker-engine version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Fri, 20 Sep 2019 06:09:56 +0000 (08:09 +0200)]
package/docker-engine: security bump to version 18.09.9
Fixes the following security vulnerability:
CVE-2019-13509: Docker Engine in debug mode may sometimes add secrets to the
debug log. This applies to a scenario where docker stack deploy is run to
redeploy a stack that includes (non external) secrets. It potentially
applies to other API users of the stack API if they resend the secret.
And a number of other non-security issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Thu, 19 Sep 2019 20:52:01 +0000 (22:52 +0200)]
{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.2.x series
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Carlos Santos [Thu, 19 Sep 2019 03:51:21 +0000 (00:51 -0300)]
package/cups-filters: fix broken symlink in installation
The patch used previously to support versions of ln lacking the '-r'
option generated broken links:
$ file target/usr/lib/cups/backend/driverless
target/usr/lib/cups/backend/driverless: broken symbolic link to ../../usr/lib/cups/driver/driverless
Add a squashing of two patches already applied upstream that provide a
better solution:
https://github.com/OpenPrinting/cups-filters/pull/154
https://github.com/OpenPrinting/cups-filters/pull/157
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Carlos Santos [Thu, 19 Sep 2019 03:47:17 +0000 (00:47 -0300)]
package/cups-filters: fix build without NLS
texttotext must be linked to libiconv if !BR2_ENABLE_LOCALE so pull a
patch applied upstream that adds libiconv discovery via autoconf.
With this change, autoreconf requires the config.rpath and ABOUT-NLS
files which are not in v1.25.4. Add a pre-configure hook to fake them.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12031
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Giulio Benetti [Wed, 18 Sep 2019 09:11:42 +0000 (11:11 +0200)]
package/protobuf: work around gcc bug 85180
With Microblaze Gcc version < 8.x the build hangs due to gcc bug
85180: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180. The bug
shows up when building protobuf with optimization but not when building
with -O0. To work around this, if BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y we
force using -O0.
Fixes:
http://autobuild.buildroot.net/results/
73dc9610a13d6e14eec58d529617210d93d5dec4/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: fix variable name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sébastien Szymanski [Tue, 17 Sep 2019 12:16:24 +0000 (14:16 +0200)]
package/python-flask-login: add hash for the license file
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Matt Weber [Tue, 17 Sep 2019 03:58:15 +0000 (22:58 -0500)]
package/fakeroot: remove 1/1 numbering from patch
check-package warns with:
0002-communicate-check-return-status-of-msgrcv.patch
generate your patches with 'git format-patch -N'
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Matt Weber [Tue, 17 Sep 2019 03:58:14 +0000 (22:58 -0500)]
package/fakeroot: test for SYSV IPC support
fakeroot can be built to either use SYSV IPC or TCP for message passing.
A bug was discovered where Microsoft Windows 10 Services for Linux
doesn't include support for SYSV IPC MsgQ. This patch adds support to
detect this case and automatically build fakeroot to use the TCP
transport instead (It is assumed a TCP transport would definitely have
more overhead then MsgQs so the default wasn't changed to TCP).
Fixes
https://bugs.busybox.net/show_bug.cgi?id=11366
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Jean-Francois Doyon <jfdoyon@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: use a post-patch hook and AUTORECONF=YES]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Thomas Petazzoni [Sat, 21 Sep 2019 12:48:40 +0000 (14:48 +0200)]
Revert "package/python-sip: bump to version 4.19.13"
This reverts commit
9135ab7a7c76b38b50dadbc381c55e77c86e9e0d. This
version bump causes a major issue: the entire root filesystem of the
build machine is being copied into $(STAGING_DIR)/usr/lib/python2.7/,
causing the build to consume the entire disk space of the machine.
>>> python-sip 4.19.13 Installing to target
[...]
make[2]: Leaving directory `/home/test/buildroot/output/build/python-sip-4.19.13/siplib'
Traceback (most recent call last):
File "/home/test/buildroot/output/build/python-sip-4.19.13/mk_distinfo.py", line 108, in <module>
fn_f = open(fn, 'rb')
FileNotFoundError: [Errno 2] No such file or directory: '/home/test/buildroot/output/target/usr/lib/python3.7/site-packages/sip.pyi'
make[1]: *** [install_distinfo] Error 1
make[1]: *** Waiting for unfinished jobs....
cp: cannot open `/proc/fs/aufs/plink_maint' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_fifos' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_hardlinks' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_regular' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_symlinks' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/cad_pid' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/unprivileged_userns_apparmor_policy' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/usermodehelper/bset' for reading: Permission denied
...
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Ryan Coe [Sun, 15 Sep 2019 19:35:58 +0000 (12:35 -0700)]
package/mariadb: bump to version 10.3.18
Release notes:
https://mariadb.com/kb/en/library/mariadb-10318-release-notes/
Changelog:
https://mariadb.com/kb/en/mariadb-10318-changelog/
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Ryan Coe [Sun, 15 Sep 2019 19:35:57 +0000 (12:35 -0700)]
package/mariadb: bump to version 10.3.17
Release notes:
https://mariadb.com/kb/en/library/mariadb-10317-release-notes/
Changelog:
https://mariadb.com/kb/en/mariadb-10317-changelog/
Fixes the following security vulnerabilities:
CVE-2019-2805
CVE-2019-2740
CVE-2019-2739
CVE-2019-2737
CVE-2019-2758
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Ryan Coe [Sun, 15 Sep 2019 19:35:56 +0000 (12:35 -0700)]
package/mariadb: add bug tracker link to existing patch
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Ryan Coe [Sun, 15 Sep 2019 19:35:59 +0000 (12:35 -0700)]
package/mariadb: fix build error with newer cmake
When using a newer host system cmake to build MariaDB, the following build
error occurs:
CMake Error at cmake/os/Linux.cmake:29 (STRING):
STRING sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
CMakeLists.txt:101 (INCLUDE)
CMake Error at cmake/os/Linux.cmake:29 (STRING):
STRING sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
CMakeLists.txt:101 (INCLUDE)
Fixes: https://bugs.busybox.net/show_bug.cgi?id=11781
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Seiderer [Sun, 15 Sep 2019 19:35:55 +0000 (12:35 -0700)]
package/mariadb: use host-openssl from buildroot-system
mariadb no longer allows the WITH_SSL=OFF configure option. It will
instead search for openssl or gnutls headers, and if missing error out
with:
CMake Error at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
Could NOT find GnuTLS (missing: GNUTLS_LIBRARY GNUTLS_INCLUDE_DIR)
(Required is at least version "3.3.24")
Call Stack (most recent call first):
/usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:378 (_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake/Modules/FindGnuTLS.cmake:54 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
libmariadb/CMakeLists.txt:298 (FIND_PACKAGE)
Therefore, make host-mariadb depend on host-openssl, and tell mariadb
to use the system openssl.
This was not found by autobuilders because mariadb isn't built in the
autobuilders (it's part of a choice).
Note that the target mariadb already has an unconditional dependency
on openssl.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Carlos Santos [Sat, 14 Sep 2019 17:09:22 +0000 (14:09 -0300)]
package/util-linux: revert logic regarding pam_selinux module
Leave pam_selinux enabled by default in su.pam and remove it from the
/etc/pam.d/su and /etc/pam.d/su-l files if libselinux is not selected.
This cosmetic change prevents leaving a misleading commented-out line
that references a PAM module that does not exist.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fabrice Fontaine [Wed, 4 Sep 2019 17:57:05 +0000 (19:57 +0200)]
package/gnutls: use __get_cpuid_count() only when available
Fixes:
- http://autobuild.buildroot.org/results/
4e874ed2fcc1f969f2f8ece88985ccd625f2c55b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fabrice Fontaine [Fri, 20 Sep 2019 17:28:40 +0000 (19:28 +0200)]
package/fltk: bump to version 1.3.5
Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 20 Sep 2019 17:17:11 +0000 (19:17 +0200)]
package/libgsm: bump to version 1.0.18
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 20 Sep 2019 17:10:45 +0000 (19:10 +0200)]
package/bcm2835: bump to version 1.60
Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Fri, 20 Sep 2019 16:54:26 +0000 (18:54 +0200)]
package/tor: bump version to 0.4.1.6
Release notes: https://blog.torproject.org/new-release-tor-0416
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 20 Sep 2019 16:52:03 +0000 (18:52 +0200)]
package/bdwgc: bump to version 8.0.4
Remove patch (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 20 Sep 2019 16:45:42 +0000 (18:45 +0200)]
package/bash-completion: bump to version 2.9
Remove patch (already on version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Esben Haabendal [Tue, 17 Sep 2019 08:50:33 +0000 (10:50 +0200)]
package/python-kiwisolver: new package
Signed-off-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Vadim Kochan [Mon, 16 Sep 2019 16:50:51 +0000 (19:50 +0300)]
docs/manual: add missing external toolchain *.mk inclusion in sample
If follow through the customize-outside-br.txt with how to add external
toolchain in br-ext tree then one thing is missing - inclusion of
*.mk file with external toolchain package description.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Joris Offouga [Mon, 16 Sep 2019 16:23:03 +0000 (18:23 +0200)]
package/python-simplelogging: new package
Simplelogging is easier implementation of logging.
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Joris Offouga [Mon, 16 Sep 2019 11:55:03 +0000 (13:55 +0200)]
package/python-colorlog: new package
Colorlog is a formatter for the python logging module.
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Wed, 18 Sep 2019 18:19:37 +0000 (20:19 +0200)]
package/collectl: new package
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adam Duskett [Wed, 18 Sep 2019 17:03:29 +0000 (10:03 -0700)]
package/libglib2: fix building on older distributions
When updating to libglib2 2.62.0, the file 0002-add-option-to-build-tests.patch
had to be refactored to work with the new build_tests checks. In the process of
refactoring, a missing check was overlooked in glib/meson.build causing
distributions with older versions of objcopy to fail because the older version
does not contain the --add-symbol argument.
Adding the check for the build_tests argument fixes the issue.
Fixes:
http://autobuild.buildroot.net/results/
dcc2352a036aba9650eae8abaaa23819fc67332d
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Thu, 19 Sep 2019 20:15:16 +0000 (22:15 +0200)]
package/libevdev: bump version to 1.8.0
For details see [1].
[1] https://lists.freedesktop.org/archives/input-tools/2019-August/001521.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Thu, 19 Sep 2019 20:02:57 +0000 (22:02 +0200)]
package/ytree: needs glibc/uclibc toolchain (re_comp/re_exec)
Fixes:
match.o: In function `SetMatchSpec':
match.c:(.text+0x9c): undefined reference to `re_comp'
match.o: In function `Match':
match.c:(.text+0xca): undefined reference to `re_exec'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Thu, 19 Sep 2019 19:52:00 +0000 (21:52 +0200)]
package/ytree: uses fork(), needs MMU
Fixes [1]:
login.c:(.text+0x546): undefined reference to `fork'
[1] http://autobuild.buildroot.net/results/
bcbd0b826d5af1d429c23255d63dce6c7080085e
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Wed, 18 Sep 2019 17:18:18 +0000 (19:18 +0200)]
package/acpid: bump to version 2.0.32
Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Wed, 18 Sep 2019 17:14:51 +0000 (19:14 +0200)]
package/mbedtls: security bump to version 2.16.3
- Remove second patch (already in version)
- Fix a missing error detection in ECJPAKE. This could have caused a
predictable shared secret if a hardware accelerator failed and the
other side of the key exchange had a similar bug.
- When writing a private EC key, use a constant size for the private
value, as specified in RFC 5915. Previously, the value was written as
an ASN.1 INTEGER, which caused the size of the key to leak about 1 bit
of information on average and could cause the value to be 1 byte too
large for the output buffer.
- The deterministic ECDSA calculation reused the scheme's HMAC-DRBG to
implement blinding. Because of this for the same key and message the
same blinding value was generated. This reduced the effectiveness of
the countermeasure and leaked information about the private key
through side channels. Reported by Jack Lloyd.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Wed, 18 Sep 2019 17:03:38 +0000 (19:03 +0200)]
package/nilfs-utils: bump to version 2.2.8
- Change NILFS_UTILS_SITE to https://nilfs.sourceforge.io as this is the
official site with the official tarballs
- Remove first and third patch (already in version)
- Drop fourth patch and host-pkgconf from dependencies, not needed since
https://github.com/nilfs-dev/nilfs-utils/commit/
d5ce780856db5200917b69cd1049bd7b839ac6bb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Wed, 18 Sep 2019 17:01:29 +0000 (19:01 +0200)]
package/bind: security bump to version 9.11.10
- Remove all patches except first one (already in version)
- Update first patch
- Fix CVE-2019-6471: A race condition when discarding malformed packets
can cause BIND to exit with an assertion failure
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kieran Bingham [Thu, 19 Sep 2019 10:25:53 +0000 (11:25 +0100)]
package/libcamera: bump to version
448393f77ec9e37cb807e8e8d35c1a4877d253d4
Update to the latest version of libcamera, including a fix for toolchains
which require libatomic to be linked manually.
The patch which handles this locally is therefore removed.
Since the last version update, the option to disable building of the
unit tests has been renamed from '-Dtests=' to '-Dtest='
This is updated accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adrian Perez de Castro [Thu, 19 Sep 2019 14:27:52 +0000 (17:27 +0300)]
package/webkitgtk: bump to version 2.26.0
This is a new major release which brings in many improvements and new
features. For a complete list, please refer to the release notes:
https://webkitgtk.org/2019/09/09/webkitgtk2.26.0-released.html
A small patch is added which fixes a build failure when X11 headers
are not available (for example, when building a Wayland-only system)
The new support for the WPE renderer on Wayland and the new Bubblewrap
sandbox need additional dependencies and therefore are explicitly
disabled at the moment.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Thu, 19 Sep 2019 15:40:35 +0000 (16:40 +0100)]
arch/riscv: set the default float ABI based on ISA extensions
This patch sets the default floating point ABI based on the ISA
extensions that have been selected rather than defaulting to soft
float.
For 64-bit:
ISA 'D' selects lp64d
ISA 'F' selects lp64f
Otherwise select lp64
For 32-bit:
ISA 'D' selects ilp32d
ISA 'F' selects ilp32f
Otherwise select ilp32
This change was proposed by Palmer Dabbelt at SiFive.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Vivien Didelot [Thu, 19 Sep 2019 16:53:31 +0000 (12:53 -0400)]
DEVELOPERS: change Vivien Didelot e-mail address
I am exclusively using my Gmail address for now on. Reflect this in
the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Vivien Didelot [Thu, 19 Sep 2019 16:53:59 +0000 (12:53 -0400)]
DEVELOPERS: change Mathieu Audat's email address
Mathieu is no longer working at Savoir-faire Linux, update his email
address in the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Wed, 18 Sep 2019 21:02:50 +0000 (23:02 +0200)]
package/libglib2: remove empty consecutive lines
Fixes the following check-package warning:
package/libglib2/libglib2.mk:90: consecutive empty lines
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Matt Weber [Wed, 18 Sep 2019 01:35:06 +0000 (20:35 -0500)]
package/bc: remove default value of _SOURCE var
check-package output:
package/bc/bc.mk:8: remove default value of _SOURCE variable
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/
295683825
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Simon Rowe [Wed, 18 Sep 2019 08:59:35 +0000 (09:59 +0100)]
package/openvmtools: base sysv script on current template
Signed-off-by: Simon Rowe <simon.rowe@citrix.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Baruch Siach [Wed, 18 Sep 2019 15:07:00 +0000 (18:07 +0300)]
package/lsof: bump to version 4.93.2
New upstream at github. Update homepage link and download site.
Drop the custom extract command; we now get the source tree from github.
Drop patch #2; the code detects rpc support.
Add optional dependency on libtirpc.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Wed, 18 Sep 2019 14:38:39 +0000 (16:38 +0200)]
package/mosquitto: security bump to version 1.6.6
Fixes a security issue. From the annoncement:
A vulnerability exists in Mosquitto versions 1.5 to 1.6.5 inclusive.
If a client sends a SUBSCRIBE packet containing a topic that consists of
approximately 65400 or more '/' characters, i.e. the topic hierarchy
separator, then a stack overflow will occur.
The issue is fixed in Mosquitto 1.6.6 and 1.5.9. Patches for older versions
are available at https://mosquitto.org/files/cve/2019-hier
The fix addresses the problem by restricting the allowed number of topic
hierarchy levels to 200. An alternative fix is to increase the size of the
stack by a small amount.
https://mosquitto.org/blog/2019/09/version-1-6-6-released/
Also notice that 1.6.5 silently fixed a security issue:
CVE-2019-11778
A vulnerability exists in Mosquitto version 1.6 to 1.6.4 inclusive, known as CVE-2019-11778
If an MQTT v5 client connects to Mosquitto, sets a last will and testament,
sets a will delay interval, sets a session expiry interval, and the will
delay interval is set longer than the session expiry interval, then a use
after free error occurs, which has the potential to cause a crash in some
situations.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
James Hilliard [Tue, 3 Sep 2019 21:28:12 +0000 (15:28 -0600)]
package/systemd-bootchart: enable systemd-bootchart.service
This would normally be enabled by systemctl preset-all however since we
don't have a host systemctl we need to enable the service manually.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 16 Sep 2019 18:31:03 +0000 (20:31 +0200)]
package/rpcbind: bump to version 1.2.5
- Remove all patches except first one (already in version)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sun, 15 Sep 2019 18:40:00 +0000 (20:40 +0200)]
package/chocolate-doom: bump to version 3.0.0
- Remove patch (already in version)
- Switch to sdl2
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Ricardo Martincoski [Mon, 16 Sep 2019 02:09:08 +0000 (23:09 -0300)]
DEVELOPERS: trim runtime tests for Ricardo Martincoski
Keep listing the test infra so the developer is included in reviews, but
trim the list of tests to those the developer are most interested in.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Mon, 16 Sep 2019 19:04:34 +0000 (21:04 +0200)]
utils/scancpan: improve license file detection
MANIFEST may contains line like this:
"LICENSE LICENSE file (added by Distar)"
so, retains only the first word.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Mon, 16 Sep 2019 13:50:48 +0000 (15:50 +0200)]
package/luksmeta: do not build man pages
Fixes:
http://autobuild.buildroot.net/results/
a6247b95f1578fe1daec485589582310c75b5d84/
luksmeta-v9 generates man pages at build if a2x is available since:
commit
3fa51bb22350fee101fc52044949f6eb394114ae
Author: Daniel Kopeček <dkopecek@redhat.com>
Date: Fri Jul 13 01:52:45 2018 +0200
Generate manual page from source during build time
If a2x (asciidoc) is not available during configure time,
a warning will be generated and the manual page wont be
generated nor installed.
Man pages are not needed on target and the build step fails in certain
setups, so disable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Mon, 16 Sep 2019 12:41:45 +0000 (14:41 +0200)]
package/bwm-ng: bump version to 0.6.2
Add hash for license file, and drop 'v' from version for compatibility with
release-monitoring.org.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pierre-Jean Texier [Mon, 16 Sep 2019 15:39:12 +0000 (17:39 +0200)]
package/python-periphery: bump to version 1.1.2
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Mon, 16 Sep 2019 14:34:25 +0000 (16:34 +0200)]
package/python-validators: bump version to 0.12.6
Includes a number of post-0.12.2 fixes, including a python 3.7 compatibility
fix:
https://github.com/kvesteri/validators/blob/master/CHANGES.rst
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adrian Perez de Castro [Sun, 15 Sep 2019 22:57:43 +0000 (01:57 +0300)]
support/dependencies/dependencies.sh: check for JSON:PP Perl module
The JSON::PP Perl module is used at build time by the webkitgtk and
wpewebkit packages.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Tue, 17 Sep 2019 18:16:24 +0000 (20:16 +0200)]
package/perl-role-tiny: bump to version 2.000008
The project now ships a proper LICENSE file, with the complete license
text, so we use it instead of the README file. The license remains the
same as Perl, i.e Artistic license or GPL-1.0+.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Tue, 17 Sep 2019 18:16:23 +0000 (20:16 +0200)]
package/perl-net-dns: bump to version 0.56
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Tue, 17 Sep 2019 18:16:22 +0000 (20:16 +0200)]
package/perl-mailtools: bump to version 2.21
The license file hash has changed, due to changes in the installation
instructions.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Tue, 17 Sep 2019 18:16:21 +0000 (20:16 +0200)]
package/perl-file-slurp: bump to version 9999.28
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Tue, 17 Sep 2019 18:16:20 +0000 (20:16 +0200)]
package/perl-devel-stacktrace: bump to version 2.04
The copyright year in the LICENSE file was changed, which explains why
the hash is modified:
-This software is Copyright (c) 2000 - 2017 by David Rolsky.
+This software is Copyright (c) 2000 - 2019 by David Rolsky.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Tue, 17 Sep 2019 18:16:19 +0000 (20:16 +0200)]
package/perl-date-manip: bump to version 6.78
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Tue, 17 Sep 2019 18:16:18 +0000 (20:16 +0200)]
package/perl-class-method-modifiers: bump to version 2.13
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 16 Sep 2019 16:51:02 +0000 (18:51 +0200)]
package/fio: bump to version 3.15
- Remove patch (already in version)
- Change FIO_SITE to http://brick.kernel.dk/snaps to remove 'fio-'
prefix from FIO_VERSION to match what is given by
release-monitoring.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 16 Sep 2019 16:51:01 +0000 (18:51 +0200)]
package/fio: fix build with glibc 2.30
Fixes:
- http://autobuild.buildroot.org/results/
ec93c8e7f046b081aaa9e0a76708d61ba1ab921c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adam Duskett [Mon, 16 Sep 2019 16:51:25 +0000 (09:51 -0700)]
package/python-pip: bump to version 19.2.3
Also:
Select PYTHON_SSL or PYTHON3_SSL as pip connects to https://pypi.org
making SSL mandatory for runtime.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 16 Sep 2019 16:53:31 +0000 (18:53 +0200)]
package/grpc: fix build with glibc 2.30
Fixes:
- http://autobuild.buildroot.org/results/
42eb63a89228d340cab05c7ab65fab9b02814689
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 16 Sep 2019 17:01:24 +0000 (19:01 +0200)]
package/haproxy: depends on BR2_TOOLCHAIN_HAS_SYNC_1
Fixes:
- http://autobuild.buildroot.org/results/
512904ace780508de5e3a56b0094bbe6287d751e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 16 Sep 2019 17:16:57 +0000 (19:16 +0200)]
boot/afboot-stm32: bump to version 0.2
Remove patch (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
projects / buildroot.git / log