Jan Hubicka [Wed, 1 Jan 2020 10:47:21 +0000 (11:47 +0100)]
ipa.c (walk_polymorphic_call_targets): Fix updating of overall summary.
* ipa.c (walk_polymorphic_call_targets): Fix updating of overall
summary.
From-SVN: r279810
Jakub Jelinek [Wed, 1 Jan 2020 00:20:39 +0000 (01:20 +0100)]
re PR tree-optimization/93098 (ICE with negative shifter)
PR tree-optimization/93098
* match.pd (popcount): For shift amounts, use integer_onep
or wi::to_widest () == cst instead of tree_to_uhwi () == cst
tests. Make sure that precision is power of two larger than or equal
to 16. Ensure shift is never negative. Use HOST_WIDE_INT_UC macro
instead of ULL suffixed constants. Formatting fixes.
* gcc.c-torture/compile/pr93098.c: New test.
From-SVN: r279809
GCC Administrator [Wed, 1 Jan 2020 00:16:17 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279808
Richard Sandiford [Tue, 31 Dec 2019 15:32:06 +0000 (15:32 +0000)]
Fix EXTRACT_LAST_REDUCTION segfault
This code:
/* Make sure we don't accidentally use the old condition. */
cond_expr = NULL_TREE;
was misplaced, since it triggered even when we needed to force the
original unmodified cond_expr into a mask temporary and then invert it.
2019-12-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-stmts.c (vectorizable_condition): Only nullify cond_expr
if we've created a new condition. Don't nullify it if we've decided
to keep it and then invert the result.
gcc/testsuite/
* gcc.dg/vect/vect-cond-reduc-6.c: New test.
From-SVN: r279804
Ayush Mittal [Tue, 31 Dec 2019 10:34:34 +0000 (10:34 +0000)]
re PR libgomp/93065 (libgomp: destructor missing to delete goacc_cleanup_key)
PR libgomp/93065
* oacc-init.c (goacc_runtime_deinitialize): New function.
From-SVN: r279803
Richard Sandiford [Tue, 31 Dec 2019 08:28:24 +0000 (08:28 +0000)]
Fix SSA update when vectorisation adds a vdef to a read-only loop
This patch fixes an awkward corner case in which:
(a) we apply if-conversion to a loop;
(b) the original scalar loop doesn't have a vdef, and thus doesn't
need a virtual phi;
(c) the vectorised main loop does need a vdef and a virtual phi (see below);
(d) we also vectorise the epilogue; and
(e) the vectorised epilogue still needs a scalar epilogue
The specific case in which (c) applies is if a read-only loop is
vectorised using IFN_LOAD_LANES, which uses clobber statements to
mark the lifetime of the temporary array.
The vectoriser relies on the SSA renamer to update virtual operands.
All would probably be well if it postponed this update until after
it had vectorised both the main loop and the epilogue loop. However,
when vectorising the epilogue, vect_do_peeling does:
create_lcssa_for_virtual_phi (loop);
update_ssa (TODO_update_ssa_only_virtuals);
(with "loop" in this case being the to-be-vectorised epilogue loop).
So the vectoriser puts the virtual operand into SSA form for the
vectorised main loop as a separate step, during the early stages
of vectorising the epilogue.
I wasn't sure at first why that update_ssa was there. It looked
initially like it was related to create_lcssa_for_virtual_phi,
which seemed strange when create_lcssa_for_virtual_phi keeps the
SSA form up-to-date. But before r241099 it had the following comment,
which AFAICT is still the reason:
/* We might have a queued need to update virtual SSA form. As we
delete the update SSA machinery below after doing a regular
incremental SSA update during loop copying make sure we don't
lose that fact.
??? Needing to update virtual SSA form by renaming is unfortunate
but not all of the vectorizer code inserting new loads / stores
properly assigns virtual operands to those statements. */
The patch restores that comment since IMO it's helpful.
(a), (d) and (e) mean that we copy the original un-if-converted scalar
loop to act as the scalar epilogue. The update_ssa above means that this
copying needs to cope with any new virtual SSA names in the main loop.
The code to do that (reasonably) assumed that one of two things was true:
(1) the scalar loop and the vector loops don't have vdefs, and so no
virtual operand update is needed. The definition that applies
on entry to the loops is the same in all cases.
(2) the scalar loop and the vector loops have virtual phis, and so --
after applying create_lcssa_for_virtual_phi on the to-be-vectorised
epilogue loop -- the virtual operand update can be handled in the
same way as for normal SSA names.
But (b) and (c) together mean that the scalar loop and the
still-to-be-vectorised epilogue loop have no virtual phi that (2)
can use. We'd therefore keep the original vuses when duplicating,
rather than updating them to the definition that applies on exit
from the epilogue loop. (Since the epilogue is still unvectorised
and has no vdefs, the definition that applies on exit is the same
as the one that applies on entry.)
This patch therefore adds a third case: the scalar loop and
to-be-vectorised epilogue have no virtual defs, but the main loop does.
2019-12-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop-manip.c (create_lcssa_for_virtual_phi): Return
the incoming virtual operand definition.
(vect_do_peeling): When vectorizing an epilogue loop, handle the
case in which the main loop has a virtual phi and the epilogue
and scalar loops don't. Restore an earlier comment about the
update_ssa call.
gcc/testsuite/
* gcc.dg/vect/vect-epilogues-2.c: New test.
From-SVN: r279802
GCC Administrator [Tue, 31 Dec 2019 00:16:37 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279801
Olivier Hainque [Mon, 30 Dec 2019 22:46:25 +0000 (22:46 +0000)]
Add ChangeLog entry for rev 279797
From-SVN: r279798
Olivier Hainque [Mon, 30 Dec 2019 22:42:02 +0000 (22:42 +0000)]
undefine OFFSET in testsuite/gcc.dg/vect/tree-vect.h
2019-12-20 Olivier Hainque <hainque@adacore.com>
* gcc.dg/vect/tree-vect.h: #undef OFFSET.
From-SVN: r279797
Corentin Gay [Mon, 30 Dec 2019 22:36:14 +0000 (22:36 +0000)]
VxWorks has_nanosleep for libstdc++ enable-libstdcxx-time auto
2019-12-30 Corentin Gay <gay@adacore.com>
* acinclude.m4 (vxworks*): New entry. Set ac_has_nanosleep=yes.
* configure: Regenerate.
From-SVN: r279796
Olivier Hainque [Mon, 30 Dec 2019 22:31:37 +0000 (22:31 +0000)]
Prevent redefinition of WCHAR_MAX from testsuite/gcc.dg/cpp/ucs.c
gcc/testsuite/gcc.dg/cpp/ucs.c #include <limits.h>
and then crafts a definition of WCHAR_MAX depending
on __WCHAR_TYPE__.
The test fails in VxWorks configurations because WCHAR_MAX
is already exposed by the system limits.h.
The patch simply guards the tentative definition
by a check verifying if the macro is defined already, so
we're using the value exposed by limits.h in this case.
2019-12-30 Olivier Hainque <hainque@adacore.com>
* testsuite/gcc.dg/cpp/ucs.c: Prevent redefinition
of WCHAR_MAX if already exposed by limits.h.
From-SVN: r279795
Olivier Hainque [Mon, 30 Dec 2019 22:28:18 +0000 (22:28 +0000)]
allow $ in scan-tree-dump expressions matching symbol names
This change adjusts a few scan-tree-dump expressions
to allow '$' as well as '.' when matching symbol names,
This improves results on VxWorks targets configured with:
#undef NO_DOLLAR_IN_LABEL
#define NO_DOT_IN_LABEL
2019-12-20 Olivier Hainque <hainque@adacore.com>
Jerome Lambourg <lambourg@adacore.com>
* c-c++-common/pr56493.c: Allow '$' in addition to '.'
scan-tree-dump expressions matching symbol names.
* gcc.dg/tree-ssa/sra-17.c: Likewise.
* gcc.dg/tree-ssa/sra-18.c: Likewise.
Co-Authored-By: Jerome Lambourg <lambourg@adacore.com>
From-SVN: r279794
Joel Brobecker [Mon, 30 Dec 2019 22:26:29 +0000 (22:26 +0000)]
Guard aarch64/aapcs64 tests using abitest.S by check_weak_available
2019-12-16 Joel Brobecker <brobecker@adacore.com>
Olivier Hainque <hainque@adacore.com>
* gcc.target/aarch64/aapcs64/aapcs64.exp: Guard tests using
abitest.S by check_weak_available.
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r279793
Jerome Lambourg [Mon, 30 Dec 2019 22:22:34 +0000 (22:22 +0000)]
Adapt libstdc++ os_defines for VxWorks to more recent versions
This change reworks the VxWorks specific os_defines.h internal
lisbstdc++ header to help fix build and runtime failures of various
kinds in environments from 6.4/6.9 to 7 SR640, based on experiments
and observations conducted against real installs of these OSes for
different CPU architectures.
2019-12-30 Jerome Lambourg <lambourg@adacore.com>
Olivier Hainque <hainque@adacore.com>
libstdc++
* config/os/vxworks/os_defines.h
(NOMINMAX): Always redefine to 1.
(_NO_CPP_INLINES): Likewise.
(_GLIBCXX_USE_WEAK_REF): Define to 1 for RTP on
VxWorks >= 7, to 0 otherwise.
(_GLIBCXX_HAVE_TLS): Define to 1.
For VxWorks >= 7:
(_GLIBCXX_USE_C99_MATH): Define to 1.
(_GLIBCXX_USE_C99_MATH_FP_MACROS_DYNAMIC): Define to 0.
(_HAS_TR1_DECLARATIONS): Redefine to 0.
For VxWorks < 7, RTP:
(_GLIBCXX_INCLUDE_NEXT_C_HEADERS): Define to 1.
(_GLIBCXX_USE_C99_FP_MACROS_DYNAMIC): Redefine to 1.
(__CORRECT_ISO_CPP11_MATH_H_PROTO_FP): Define.
For VxWorks < 7, kernel: #include <vxWorks.h>
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r279792
Olivier Hainque [Mon, 30 Dec 2019 22:16:37 +0000 (22:16 +0000)]
Arrange to preinclude yvals.h ahead of stdint on VxWorks 7
On Vxworks 7, includers of stdint.h (which we currently "provide")
need yvals.h to have been included ahead.
Instead of altering the common stdint-gcc.h with unpleasant
vxworks specific bits to do that, we arrange to provide stdint-gcc.h
on its own along with a stdint.h wrapper which preincludes yvals.h
on vx7 then includes stdint-gcc.h.
2019-12-30 Olivier Hainque <hainque@adacore.com>
* config/vxworks/stdint.h: New file. Include _yvals.h
then stdint-gcc.h.
* config/t-vxworks: Arrange to install the stdint.h wrapper.
* config.gcc (*-*-vxworks*): Add stdint-gcc.h to $extra_headers
so it gets copied. Set use_gcc_stdint to request _not_ crafting
stdint.h through the common Makefile rules.
From-SVN: r279791
Olivier Hainque [Mon, 30 Dec 2019 22:09:26 +0000 (22:09 +0000)]
Add missing file expected with rev 279781
* config/vxworks-c.c: New file.
From-SVN: r279790
Joseph Myers [Mon, 30 Dec 2019 22:08:39 +0000 (22:08 +0000)]
* fi.po: Update.
From-SVN: r279788
Olivier Hainque [Mon, 30 Dec 2019 21:55:47 +0000 (21:55 +0000)]
Add missing files expected with rev 279784
* config/vxworks/_yvals.h: New file.
* config/vxworks/_yvals-wrapper.h: New file.
* config/vxworks/math.h: Use it to wrap the VxWorks
math.h header.
* config/vxworks/complex.h: Likewise.
* config/vxworks/setjmp.h: Likewise.
* config/vxworks/inttypes.h: Likewise.
From-SVN: r279787
Olivier Hainque [Mon, 30 Dec 2019 21:55:39 +0000 (21:55 +0000)]
Add missing file expected with rev 279783
* config/vxworks/_vxworks-versions.h: New File.
From-SVN: r279786
Olivier Hainque [Mon, 30 Dec 2019 21:50:40 +0000 (21:50 +0000)]
Add missing file expected with rev 279781
From-SVN: r279785
Olivier Hainque [Mon, 30 Dec 2019 21:46:21 +0000 (21:46 +0000)]
Setup system header wrappers for C++ on VxWorks
Starting from VxWorks 7, the system comes with a Dinkumware
environment which requires the inclusion of "yvals.h" before other
system headers. We provide wrapped versions of a few headers to
accommodate such constraints.
2019-12-30 Jerome Lambourg <lambourg@adaccore.com>
Olivier Hainque <hainque@adacore.com>
gcc/
* config/vxworks/_yvals.h: New file.
* config/vxworks/_yvals-wrapper.h: New file.
* gcc/config/vxworks/math.h: Use it to wrap the VxWorks
math.h header.
* gcc/config/vxworks/complex.h: Likewise.
* gcc/config/vxworks/setjmp.h: Likewise.
* gcc/config/vxworks/inttypes.h: Likewise.
* config.gcc (*-*-vxworks*): Add system header wrappers
to extra_headers.
(powerpc-*-vxworks*): Reuse the common extra_headers.
From-SVN: r279784
Olivier Hainque [Mon, 30 Dec 2019 21:42:26 +0000 (21:42 +0000)]
Introduce an internal API for VxWorks version checks
This changes introduces an internal API for VxWorks version checks
within runtime files, a prerequisite to a few fixes coming up for libstdc++
builds on more recent versions of the OS.
2019-12-30 Olivier Hainque <hainque@adacore.com>
gcc/
* config/vxworks/_vxworks-versions.h: New file.
* config.gcc (*-*-vxworks*): Add it to extra_headers.
libgcc/
* config/gthr-vxworks.h: Use _vxworks-versions.h.
* config/gthr-vxworks-tls.c: Likewise.
From-SVN: r279783
Olivier Hainque [Mon, 30 Dec 2019 21:39:15 +0000 (21:39 +0000)]
Simplify the compilation commands for config/vxworks.c
2019-12-30 Olivier Hainque <hainque@adacore.com>
* config/t-vxworks: Rework the vxworks.o compilation
rules to use $(COMPILE).
From-SVN: r279782
Joel Brobecker [Mon, 30 Dec 2019 21:36:34 +0000 (21:36 +0000)]
Setup TARGET_C_PREINCLUDE for VxWorks
This patch modifies the C & C++ VxWorks compiler to predefine
the __STDC_ macros verified by gcc.dg/c99-predef-1.c in the testsuite.
2019-12-13 Joel Brobecker <brobecker@adacore.com>
* config.gcc <*-*-vxworks*>: Add vxworks-c.o to c_target_objs
and cxx_target_objs. Set target_has_targetcm to "yes". Add
vxworks-predef.h to extra_headers.
* config/t-vxworks (vxworks-c.o): New target.
* config/vxworks-c.c: New file.
* config/vxworks/vxworks-predef.h: New file.
From-SVN: r279781
Alexandre Oliva [Mon, 30 Dec 2019 21:34:35 +0000 (21:34 +0000)]
Refine definitions for wchar_t/wint_t on VxWorks
This change refines the VxWorks macro definitions configuring
wchar_t to accommodate the VxWorks7 environment, where wchar_t
is now typically a 32bit type.
We also ensure that the definitions for wint_t are always based
on those for wchar_t, so the two remain in sync in environments
where WCHAR_TYPE is redefined for a specific CPU architecture.
2019-12-30 Alexandre Oliva <oliva@adacore.com>
Olivier Hainque <hainque@adacore.com>
* config/vx-common.h (WCHAR_TYPE_SIZE): 32 on VxWorks 7.
(WCHAR_TYPE): Pick accordingly.
(WINT_TYPE_SIZE): Define in terms of WCHAR_TYPE_SIZE.
(WINT_TYPE): Define in terms of WCHAR_TYPE.
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r279780
Olivier Hainque [Mon, 30 Dec 2019 21:31:18 +0000 (21:31 +0000)]
Identify sections in vx-common.h
2019-12-30 Olivier Hainque <hainque@adacore.com>
* config/vx-common.h: Minor reorganization and add
sectioning comments.
From-SVN: r279779
Doug Rupp [Mon, 30 Dec 2019 21:28:50 +0000 (21:28 +0000)]
Define STARTFILE_PREFIX_SPEC for powerpc VxWorks < 7
2019-12-30 Doug Rupp <rupp@adacore.com>
* config/rs6000/vxworks.h (STARTFILE_PREFIX_SPEC): Define.
From-SVN: r279778
Olivier Hainque [Mon, 30 Dec 2019 21:26:08 +0000 (21:26 +0000)]
Improve recursion protection for VxWorks limits.h
2019-12-30 Olivier Hainque <hainque@adacore.com>
Jerome Lambourg <labourg@adacore.com>
* config/t-vxworks: Arrange to alter/restore glimits.h
before/after stmp-int-hdrs, so it uses a different macro
name to protect itself against recursive inclusions.
Co-Authored-By: Jerome Lambourg <lambourg@adacore.com>
From-SVN: r279777
Olivier Hainque [Mon, 30 Dec 2019 21:22:21 +0000 (21:22 +0000)]
Improve VxWorks GTHREAD_ONCE_INIT
2019-12-30 Olivier Hainque <hainque@adacore.com>
* config/gthr-vxworks.h (GTHREAD_ONCE_INIT): Use
standard zero-initializer syntax.
From-SVN: r279776
Olivier Hainque [Mon, 30 Dec 2019 21:14:35 +0000 (21:14 +0000)]
Fix macro reference in gthr-vxworks-tls.c
2019-12-30 Olivier Hainque <hainque@adacore.com>
libgcc/
* config/gthr-vxworks-tls.c (__gthread_getspecific): Fix
reference to the internal VX_GET_TLS_DATA interface.
From-SVN: r279775
Olivier Hainque [Mon, 30 Dec 2019 21:11:22 +0000 (21:11 +0000)]
Fix typo in macro name guarding conditional in vxcrtstuff.c
2019-12-30 Olivier Hainque <hainque@adacore.com>
libgcc/
* config/vxcrtstuff.c: Fix incorrect spelling of
USE_INITFINI_ARRAY in guard.
From-SVN: r279774
John David Anglin [Mon, 30 Dec 2019 20:33:17 +0000 (20:33 +0000)]
re PR libgomp/93066 (libgomp/target.c:525:46: error: expected expression before ')' token)
PR libgomp/93066
* inclhack.def (hpux_c99_inttypes3): Fix defines for INTPTR_MAX
and UINTPTR_MAX, and missing define for SIZE_MAX.
* fixincl.x: Regenerate.
* tests/base/inttypes.h: Update for above fix.
From-SVN: r279773
Peter Bergner [Mon, 30 Dec 2019 20:23:25 +0000 (20:23 +0000)]
Fix builtin functions needlessly using VIEW_CONVERT_EXPRs on their operands.
gcc/
PR target/92923
* config/rs6000/rs6000-builtin.def (VAND, VANDC, VNOR, VOR, VXOR):
Delete.
(EQV_V16QI_UNS, EQV_V8HI_UNS, EQV_V4SI_UNS, EQV_V2DI_UNS, EQV_V1TI_UNS,
NAND_V16QI_UNS, NAND_V8HI_UNS, NAND_V4SI_UNS, NAND_V2DI_UNS,
NAND_V1TI_UNS, ORC_V16QI_UNS, ORC_V8HI_UNS, ORC_V4SI_UNS, ORC_V2DI_UNS,
ORC_V1TI_UNS, VAND_V16QI_UNS, VAND_V16QI, VAND_V8HI_UNS, VAND_V8HI,
VAND_V4SI_UNS, VAND_V4SI, VAND_V2DI_UNS, VAND_V2DI, VAND_V4SF,
VAND_V2DF, VANDC_V16QI_UNS, VANDC_V16QI, VANDC_V8HI_UNS, VANDC_V8HI,
VANDC_V4SI_UNS, VANDC_V4SI, VANDC_V2DI_UNS, VANDC_V2DI, VANDC_V4SF,
VANDC_V2DF, VNOR_V16QI_UNS, VNOR_V16QI, VNOR_V8HI_UNS, VNOR_V8HI,
VNOR_V4SI_UNS, VNOR_V4SI, VNOR_V2DI_UNS, VNOR_V2DI, VNOR_V4SF,
VNOR_V2DF, VOR_V16QI_UNS, VOR_V16QI, VOR_V8HI_UNS, VOR_V8HI,
VOR_V4SI_UNS, VOR_V4SI, VOR_V2DI_UNS, VOR_V2DI, VOR_V4SF, VOR_V2DF,
VXOR_V16QI_UNS, VXOR_V16QI, VXOR_V8HI_UNS, VXOR_V8HI,
VXOR_V4SI_UNS, VXOR_V4SI, VXOR_V2DI_UNS, VXOR_V2DI, VXOR_V4SF,
VXOR_V2DF): Add definitions.
* config/rs6000/rs6000-call.c (altivec_overloaded_builtins)
<ALTIVEC_BUILTIN_VAND, ALTIVEC_BUILTIN_VANDC, ALTIVEC_BUILTIN_VNOR,
ALTIVEC_BUILTIN_VOR, ALTIVEC_BUILTIN_VXOR>: Remove.
<ALTIVEC_BUILTIN_VAND_V4SF, ALTIVEC_BUILTIN_VAND_V2DF,
ALTIVEC_BUILTIN_VAND_V2DI, ALTIVEC_BUILTIN_VAND_V2DI_UNS,
ALTIVEC_BUILTIN_VAND_V4SI_UNS, ALTIVEC_BUILTIN_VAND_V4SI,
ALTIVEC_BUILTIN_VAND_V8HI_UNS, ALTIVEC_BUILTIN_VAND_V8HI,
ALTIVEC_BUILTIN_VAND_V16QI, ALTIVEC_BUILTIN_VAND_V16QI_UNS,
ALTIVEC_BUILTIN_VANDC_V4SF, ALTIVEC_BUILTIN_VANDC_V2DF,
ALTIVEC_BUILTIN_VANDC_V2DI, ALTIVEC_BUILTIN_VANDC_V2DI_UNS,
ALTIVEC_BUILTIN_VANDC_V4SI_UNS, ALTIVEC_BUILTIN_VANDC_V4SI,
ALTIVEC_BUILTIN_VANDC_V8HI_UNS, ALTIVEC_BUILTIN_VANDC_V8HI,
ALTIVEC_BUILTIN_VANDC_V16QI, ALTIVEC_BUILTIN_VANDC_V16QI_UNS,
ALTIVEC_BUILTIN_VNOR_V4SF, ALTIVEC_BUILTIN_VNOR_V2DF,
ALTIVEC_BUILTIN_VNOR_V2DI, ALTIVEC_BUILTIN_VNOR_V2DI_UNS,
ALTIVEC_BUILTIN_VNOR_V4SI, ALTIVEC_BUILTIN_VNOR_V4SI_UNS,
ALTIVEC_BUILTIN_VNOR_V8HI, ALTIVEC_BUILTIN_VNOR_V8HI_UNS,
ALTIVEC_BUILTIN_VNOR_V16QI, ALTIVEC_BUILTIN_VNOR_V16QI_UNS,
ALTIVEC_BUILTIN_VOR_V4SF, ALTIVEC_BUILTIN_VOR_V2DF,
ALTIVEC_BUILTIN_VOR_V2DI, ALTIVEC_BUILTIN_VOR_V2DI_UNS,
ALTIVEC_BUILTIN_VOR_V4SI_UNS, ALTIVEC_BUILTIN_VOR_V4SI,
ALTIVEC_BUILTIN_VOR_V8HI_UNS, ALTIVEC_BUILTIN_VOR_V8HI,
ALTIVEC_BUILTIN_VOR_V16QI, ALTIVEC_BUILTIN_VOR_V16QI_UNS,
ALTIVEC_BUILTIN_VXOR_V4SF, ALTIVEC_BUILTIN_VXOR_V2DF,
ALTIVEC_BUILTIN_VXOR_V2DI, ALTIVEC_BUILTIN_VXOR_V2DI_UNS,
ALTIVEC_BUILTIN_VXOR_V4SI_UNS, ALTIVEC_BUILTIN_VXOR_V4SI,
ALTIVEC_BUILTIN_VXOR_V8HI, ALTIVEC_BUILTIN_VXOR_V8HI_UNS,
ALTIVEC_BUILTIN_VXOR_V16QI, ALTIVEC_BUILTIN_VXOR_V16QI_UNS>: Add
definitions.
<P8V_BUILTIN_EQV_V16QI, P8V_BUILTIN_EQV_V8HI, P8V_BUILTIN_EQV_V4SI,
P8V_BUILTIN_EQV_V2DI, P8V_BUILTIN_NAND_V16QI, P8V_BUILTIN_NAND_V8HI,
P8V_BUILTIN_NAND_V4SI, P8V_BUILTIN_NAND_V2DI, P8V_BUILTIN_ORC_V16QI,
P8V_BUILTIN_ORC_V8HI, P8V_BUILTIN_ORC_V4SI,
P8V_BUILTIN_ORC_V2DI>: Change unsigned usages to use the new *_UNS
definition names.
(rs6000_gimple_fold_builtin) <ALTIVEC_BUILTIN_VAND_V16QI_UNS,
ALTIVEC_BUILTIN_VAND_V16QI, ALTIVEC_BUILTIN_VAND_V8HI_UNS,
ALTIVEC_BUILTIN_VAND_V8HI, ALTIVEC_BUILTIN_VAND_V4SI_UNS,
ALTIVEC_BUILTIN_VAND_V4SI, ALTIVEC_BUILTIN_VAND_V2DI_UNS,
ALTIVEC_BUILTIN_VAND_V2DI, ALTIVEC_BUILTIN_VAND_V4SF,
ALTIVEC_BUILTIN_VAND_V2DF, ALTIVEC_BUILTIN_VANDC_V16QI_UNS,
ALTIVEC_BUILTIN_VANDC_V16QI, ALTIVEC_BUILTIN_VANDC_V8HI_UNS,
ALTIVEC_BUILTIN_VANDC_V8HI, ALTIVEC_BUILTIN_VANDC_V4SI_UNS,
ALTIVEC_BUILTIN_VANDC_V4SI, ALTIVEC_BUILTIN_VANDC_V2DI_UNS,
ALTIVEC_BUILTIN_VANDC_V2DI, ALTIVEC_BUILTIN_VANDC_V4SF,
ALTIVEC_BUILTIN_VANDC_V2DF, P8V_BUILTIN_NAND_V16QI_UNS,
P8V_BUILTIN_NAND_V8HI_UNS, P8V_BUILTIN_NAND_V4SI_UNS,
P8V_BUILTIN_NAND_V2DI_UNS, P8V_BUILTIN_NAND_V2DI,
ALTIVEC_BUILTIN_VOR_V16QI_UNS, ALTIVEC_BUILTIN_VOR_V16QI,
ALTIVEC_BUILTIN_VOR_V8HI_UNS, ALTIVEC_BUILTIN_VOR_V8HI,
ALTIVEC_BUILTIN_VOR_V4SI_UNS, ALTIVEC_BUILTIN_VOR_V4SI,
ALTIVEC_BUILTIN_VOR_V2DI_UNS, ALTIVEC_BUILTIN_VOR_V2DI,
ALTIVEC_BUILTIN_VOR_V4SF, ALTIVEC_BUILTIN_VOR_V2DF,
P8V_BUILTIN_ORC_V16QI_UNS, P8V_BUILTIN_ORC_V8HI_UNS,
P8V_BUILTIN_ORC_V4SI_UNS, P8V_BUILTIN_ORC_V2DI_UNS,
P8V_BUILTIN_ORC_V2DI, ALTIVEC_BUILTIN_VXOR_V16QI_UNS,
ALTIVEC_BUILTIN_VXOR_V16QI, ALTIVEC_BUILTIN_VXOR_V8HI_UNS,
ALTIVEC_BUILTIN_VXOR_V8HI, ALTIVEC_BUILTIN_VXOR_V4SI_UNS,
ALTIVEC_BUILTIN_VXOR_V4SI, ALTIVEC_BUILTIN_VXOR_V2DI_UNS,
ALTIVEC_BUILTIN_VXOR_V2DI, ALTIVEC_BUILTIN_VXOR_V4SF,
ALTIVEC_BUILTIN_VXOR_V2DF, ALTIVEC_BUILTIN_VNOR_V16QI_UNS,
ALTIVEC_BUILTIN_VNOR_V16QI, ALTIVEC_BUILTIN_VNOR_V8HI_UNS,
ALTIVEC_BUILTIN_VNOR_V8HI, ALTIVEC_BUILTIN_VNOR_V4SI_UNS,
ALTIVEC_BUILTIN_VNOR_V4SI, ALTIVEC_BUILTIN_VNOR_V2DI_UNS,
ALTIVEC_BUILTIN_VNOR_V2DI, ALTIVEC_BUILTIN_VNOR_V4SF,
ALTIVEC_BUILTIN_VNOR_V2DF>: Use new definition names.
(builtin_function_type) <ALTIVEC_BUILTIN_VAND_V16QI_UNS,
ALTIVEC_BUILTIN_VAND_V8HI_UNS, ALTIVEC_BUILTIN_VAND_V4SI_UNS,
ALTIVEC_BUILTIN_VAND_V2DI_UNS, ALTIVEC_BUILTIN_VANDC_V16QI_UNS,
ALTIVEC_BUILTIN_VANDC_V8HI_UNS, ALTIVEC_BUILTIN_VANDC_V4SI_UNS,
ALTIVEC_BUILTIN_VANDC_V2DI_UNS, ALTIVEC_BUILTIN_VNOR_V16QI_UNS,
ALTIVEC_BUILTIN_VNOR_V8HI_UNS, ALTIVEC_BUILTIN_VNOR_V4SI_UNS,
ALTIVEC_BUILTIN_VNOR_V2DI_UNS, ALTIVEC_BUILTIN_VOR_V16QI_UNS,
ALTIVEC_BUILTIN_VOR_V8HI_UNS, ALTIVEC_BUILTIN_VOR_V4SI_UNS,
ALTIVEC_BUILTIN_VOR_V2DI_UNS, ALTIVEC_BUILTIN_VXOR_V16QI_UNS,
ALTIVEC_BUILTIN_VXOR_V8HI_UNS, ALTIVEC_BUILTIN_VXOR_V4SI_UNS,
ALTIVEC_BUILTIN_VXOR_V2DI_UNS, P8V_BUILTIN_EQV_V16QI_UNS,
P8V_BUILTIN_EQV_V8HI_UNS, P8V_BUILTIN_EQV_V4SI_UNS,
P8V_BUILTIN_EQV_V2DI_UNS, P8V_BUILTIN_EQV_V1TI_UNS,
P8V_BUILTIN_NAND_V16QI_UNS, P8V_BUILTIN_NAND_V8HI_UNS,
P8V_BUILTIN_NAND_V4SI_UNS, P8V_BUILTIN_NAND_V2DI_UNS,
P8V_BUILTIN_NAND_V1TI_UNS, P8V_BUILTIN_ORC_V16QI_UNS,
P8V_BUILTIN_ORC_V8HI_UNS, P8V_BUILTIN_ORC_V4SI_UNS,
P8V_BUILTIN_ORC_V2DI_UNS, P8V_BUILTIN_ORC_V1TI_UNS>: Handle unsigned
builtins.
gcc/testsuite/
PR target/92923
* gcc.target/powerpc/pr92923-1.c: New test.
* gcc.target/powerpc/pr92923-2.c: Likewise.
From-SVN: r279772
Marek Polacek [Mon, 30 Dec 2019 16:07:33 +0000 (16:07 +0000)]
Remove assert in reshape_init_r.
Asserting !BRACE_ENCLOSED_INITIALIZER_P seems pretty pointless, since
that checks for init_list_type_node, and a compound literal won't have
that type, nor will we see that type if we just checked that it's
something else.
* decl.c (reshape_init_r): Remove assert.
From-SVN: r279771
Paolo Carlini [Mon, 30 Dec 2019 13:23:40 +0000 (13:23 +0000)]
decl2.c (delete_sanity): Add location_t parameter and use it throughout.
/gcc/cp
2019-12-30 Paolo Carlini <paolo.carlini@oracle.com>
* decl2.c (delete_sanity): Add location_t parameter and use
it throughout.
* init.c (build_vec_delete_1): Likewise.
(build_delete): Likewise.
(build_vec_delete): Likewise.
(perform_target_ctor): Adjust call.
(perform_member_init): Likewise.
(build_vec_init): Likewise.
* decl.c (cxx_maybe_build_cleanup): Likewise.
* pt.c (tsubst_copy_and_build): Likewise.
* parser.c (cp_parser_delete_expression): Likewise, pass the
combined_loc.
* cp-tree.h: Update declarations.
/libcc1
2019-12-30 Paolo Carlini <paolo.carlini@oracle.com>
* libcp1plugin.cc (plugin_build_unary_expr): Update delete_sanity
call.
/gcc/testsuite
2019-12-30 Paolo Carlini <paolo.carlini@oracle.com>
* g++.dg/init/delete1.C: Check locations too.
* g++.dg/ipa/pr85607.C: Likewise.
* g++.dg/warn/Wdelete-incomplete-1.C: Likewise.
* g++.dg/warn/delete-non-virtual-dtor.C: Likewise.
* g++.dg/warn/incomplete1.C: Likewise.
From-SVN: r279768
Thomas Koenig [Mon, 30 Dec 2019 12:35:05 +0000 (12:35 +0000)]
re PR fortran/91651 ([F03] Implement KIND argument for INDEX)
2019-12-30 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91651
* gfortran.dg/index_3.f90: Fix PR number.
From-SVN: r279766
Thomas Koenig [Mon, 30 Dec 2019 10:47:39 +0000 (10:47 +0000)]
re PR fortran/91651 ([F03] Implement KIND argument for INDEX)
2019-12-30 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91651
Fix PR numbers in ChangeLog.
From-SVN: r279765
Thomas Koenig [Mon, 30 Dec 2019 10:43:38 +0000 (10:43 +0000)]
Remove KIND argument from INDEX so it does not mess up scalarization.
2019-12-30 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91541
* intrinsic.c (add_sym_4ind): New function.
(add_functions): Use it for INDEX.
(resolve_intrinsic): Also call f1m for INDEX.
* intrinsic.h (gfc_resolve_index_func): Adjust prototype to
take a gfc_arglist instead of individual arguments.
* iresolve.c (gfc_resolve_index_func): Adjust arguments.
Remove KIND argument if present, and make sure this is
not done twice.
* trans-decl.c: Include "intrinsic.h".
(gfc_get_extern_function_decl): Special case for resolving INDEX.
2019-12-30 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91541
* gfortran.dg/index_3.f90: New test.
From-SVN: r279763
Thomas Koenig [Mon, 30 Dec 2019 10:34:11 +0000 (10:34 +0000)]
Catch division by zero errors in array sizes.
2019-12-30 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/92961
* gfortran.h (gfc_seen_div0): Add declaration.
* arith.h (gfc_seen_div0): Add definition.
(eval_intrinsic): For integer division by zero, set gfc_seen_div0.
* decl.c (variable_decl): If resolution resp. simplification
fails for array spec and a division of zero error has been
seen, return MATCH_ERROR.
2019-12-30 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/92961
* gfortran.dg/arith_divide_2.f90: New test.
From-SVN: r279762
GCC Administrator [Mon, 30 Dec 2019 00:16:14 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279761
Jakub Jelinek [Sun, 29 Dec 2019 23:47:55 +0000 (00:47 +0100)]
re PR c++/92745 (Initializing array with vec4 results in compile error)
PR c++/92745
* g++.dg/cpp0x/initlist118.C: Add -Wno-psabi -w to dg-options.
From-SVN: r279758
Marek Polacek [Sun, 29 Dec 2019 16:44:41 +0000 (16:44 +0000)]
PR c++/88337 - Implement P1327R1: Allow dynamic_cast in constexpr.
This patch implements
<http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p1327r1.html>.
When build_dynamic_cast realizes that a dynamic_cast needs a run-time check, it
generates a call to __dynamic_cast -- see dyncast.cc in libsupc++ for its
definition. The gist of my approach is to evaluate such a call at compile time.
* constexpr.c (cxx_dynamic_cast_fn_p): New function.
(extract_obj_from_addr_offset): New function.
(get_component_with_type): New function.
(cxx_eval_dynamic_cast_fn): New function.
(cxx_eval_call_expression): Call cxx_eval_dynamic_cast_fn for a call
to __dynamic_cast.
(potential_constant_expression_1): Don't give up on
cxx_dynamic_cast_fn_p.
* rtti.c (build_dynamic_cast_1): When creating a call to
__dynamic_cast, use the location of the original expression.
* g++.dg/cpp2a/constexpr-dynamic1.C: New test.
* g++.dg/cpp2a/constexpr-dynamic10.C: New test.
* g++.dg/cpp2a/constexpr-dynamic11.C: New test.
* g++.dg/cpp2a/constexpr-dynamic12.C: New test.
* g++.dg/cpp2a/constexpr-dynamic13.C: New test.
* g++.dg/cpp2a/constexpr-dynamic14.C: New test.
* g++.dg/cpp2a/constexpr-dynamic15.C: New test.
* g++.dg/cpp2a/constexpr-dynamic16.C: New test.
* g++.dg/cpp2a/constexpr-dynamic17.C: New test.
* g++.dg/cpp2a/constexpr-dynamic2.C: New test.
* g++.dg/cpp2a/constexpr-dynamic3.C: New test.
* g++.dg/cpp2a/constexpr-dynamic4.C: New test.
* g++.dg/cpp2a/constexpr-dynamic5.C: New test.
* g++.dg/cpp2a/constexpr-dynamic6.C: New test.
* g++.dg/cpp2a/constexpr-dynamic7.C: New test.
* g++.dg/cpp2a/constexpr-dynamic8.C: New test.
* g++.dg/cpp2a/constexpr-dynamic9.C: New test.
From-SVN: r279755
Jakub Jelinek [Sun, 29 Dec 2019 11:03:25 +0000 (12:03 +0100)]
re PR target/93078 (Missing fma and round functions auto-vectorization with x86-64 (sse2))
PR target/93078
* config/i386/i386-builtins.c (ix86_builtin_vectorized_function):
Remove CASE_CFN_RINT handling.
* config/i386/i386-builtin.def (IX86_BUILTIN_RINTPD,
IX86_BUILTIN_RINTPS, IX86_BUILTIN_RINTPD256, IX86_BUILTIN_RINTPS256):
Remove.
* config/i386/sse.md (nearbyint<mode>2, rint<mode>2): New expanders
with VF iterator.
* gcc.target/i386/sse4_1-pr93078.c: New test.
* gcc.target/i386/avx-pr93078.c: New test.
* gcc.target/i386/avx512f-pr93078.c: New test.
From-SVN: r279754
Richard Sandiford [Sun, 29 Dec 2019 09:28:34 +0000 (09:28 +0000)]
Unshare DR_STEP before gimplifying it
In this testcase we use an unmasked SVE loop with an Advanced SIMD
epilogue (because we don't yet support fully-masked downward loops).
The main loop uses a gather load for the strided access while the
epilogue loop builds the access from scalars instead. In both cases
we gimplify expressions based on the DR_STEP and insert them in the
loop preheader.
The problem was that the gather load code didn't copy the DR_STEP before
gimplifying it, meaning that the epilogue loop tried to reuse a result
from the (non-dominating) main loop preheader.
It looks at first glance like there could be other instances of this too,
but this patch just deals with the gather/scatter case.
2019-12-29 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-stmts.c (vect_get_strided_load_store_ops): Copy
DR_STEP before gimplifying it.
gcc/testsuite/
* gcc.dg/vect/vect-strided-epilogue-1.c: New test.
From-SVN: r279753
Richard Sandiford [Sun, 29 Dec 2019 09:27:43 +0000 (09:27 +0000)]
Check for a supported comparison when using EXTRACT_LAST_REDUCTION
The EXTRACT_LAST_REDUCTION handling needs to generate a separate
comparison instruction that feeds the vector mask argument of the
IFN_EXTRACT_LAST call. We weren't checking whether that comparison
was supported, leading to an ICE on the testcase.
2019-12-29 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-stmts.c (vectorizable_condition): For extract-last
reductions, check that the target supports the required comparison
operation.
gcc/testsuite/
* gcc.dg/vect/vect-cond-12.c: New test.
From-SVN: r279752
GCC Administrator [Sun, 29 Dec 2019 00:16:51 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279751
Jakub Jelinek [Sat, 28 Dec 2019 09:26:03 +0000 (10:26 +0100)]
re PR bootstrap/93074 (build FAIL with --enable-offload-targets=nvptx-none)
PR bootstrap/93074
* plugin/cuda/cuda.h (cuDeviceGetName, cuDriverGetVersion): Declare.
(cuDeviceTotalMem, cuMemGetInfo): Likewise. Define to *_v2.
From-SVN: r279747
GCC Administrator [Sat, 28 Dec 2019 00:16:32 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279746
Richard Sandiford [Fri, 27 Dec 2019 16:55:36 +0000 (16:55 +0000)]
[AArch64] Fix typo in V_INT_CONTAINER
All VNx2 V_INT_CONTAINER entries should map to VNx2DI. The lower-case
version was already correct.
2019-12-27 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/iterators.md (V_INT_CONTAINER): Fix VNx2SF entry.
gcc/testsuite/
* gcc.target/aarch64/sve/mixed_size_11.c: New test.
From-SVN: r279743
Richard Sandiford [Fri, 27 Dec 2019 16:54:54 +0000 (16:54 +0000)]
Add missing target check for fully-masked fold-left reductions
The fold-left reduction code has a (rarely-used) fallback that handles
cases in which the loop is fully-masked and the target has no native
support for the reduction. The fallback includea a VEC_COND_EXPR
between the reduction vector and a safe value, so we should check
whether that VEC_COND_EXPR is supported.
2019-12-27 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vectorizable_reduction): Check whether the
target supports the required VEC_COND_EXPR operation before
allowing the fallback handling of masked fold-left reductions.
gcc/testsuite/
* gcc.target/aarch64/sve/mixed_size_10.c: New test.
From-SVN: r279742
GCC Administrator [Fri, 27 Dec 2019 00:16:34 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279739
Jakub Jelinek [Thu, 26 Dec 2019 10:16:01 +0000 (11:16 +0100)]
re PR c++/92438 (Function declaration parsed incorrectly with `-std=c++1z`)
PR c++/92438
* parser.c (cp_parser_constructor_declarator_p): If open paren
is followed by RID_ATTRIBUTE, skip over the attribute tokens and
try to parse type specifier.
* g++.dg/ext/attrib61.C: New test.
From-SVN: r279736
GCC Administrator [Thu, 26 Dec 2019 00:16:42 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279735
Alexandre Oliva [Wed, 25 Dec 2019 06:43:22 +0000 (06:43 +0000)]
Define HAVE_ for math long double functions declared in vxworks headers
When cross-building for vxworks, test for declarations of long double
functions in math.h. We don't normally test for these functions when
cross compiling, because link tests don't work, or ever really, but
not defining them as available causes replacements to be defined in
ways that may cause duplicate definition linker errors if the units
defining both the replacement and the actual implementation are
brought in because of other symbols.
for libstdc++-v3/ChangeLog
* crossconfig.m4 (GLIBCXX_CROSSCONFIG) [*-vxworks*]: Define
long double functions as available if declared by math.h.
(GLIBCXX_CHECK_MATH_DECL, GLIBCXX_CHECK_MATH_DECLS): New.
* configure: Rebuild.
From-SVN: r279731
GCC Administrator [Wed, 25 Dec 2019 00:16:22 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279730
Jiufu Guo [Tue, 24 Dec 2019 13:27:33 +0000 (13:27 +0000)]
rs6000: re-enable web and rnreg with -funroll-loops
Previously, limited unrolling was enabled at O2 for powerpc in r278034. At that
time, -fweb and -frename-registers were not enabled together with -funroll-loops
even for -O3. After that, we notice there are some performance degradations on
SPEC2006fp which caused by without web and rnreg. This patch enable -fweb
and -frename-registers for -funroll-loops to align original behavior before
r278034.
gcc/
2019-12-23 Jiufu Guo <guojiufu@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal): Enable
-fweb and -frename-registers with -funroll-loops
From-SVN: r279725
Ian Lance Taylor [Tue, 24 Dec 2019 05:05:32 +0000 (05:05 +0000)]
re PR go/93020 (Final patches to build gcc-10 on GNU/Hurd)
PR go/93020
libgo: Hurd portability patches
By Svante Signell.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/212409
From-SVN: r279724
GCC Administrator [Tue, 24 Dec 2019 00:16:21 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279723
Thomas Schwinge [Mon, 23 Dec 2019 20:20:29 +0000 (21:20 +0100)]
Restrict 'c-c++-common/goacc/mdc-1.c' to LP64, LLP64
The tree dump scanning has certain expectations.
gcc/testsuite/
* c-c++-common/goacc/mdc-1.c: Restrict to LP64, LLP64.
From-SVN: r279720
Richard Sandiford [Mon, 23 Dec 2019 09:43:46 +0000 (09:43 +0000)]
[C++] Make same_type_p return false for gnu_vector_type_p differences (PR 92789)
As Jason pointed out in the review of the C++ gnu_vector_type_p patch:
https://gcc.gnu.org/ml/gcc-patches/2019-12/msg00173.html
the real fix for the XFAILs in acle/general-c++/gnu_vectors_*.C is to
make same_type_p return false for two types if one is gnu_vector_type_p
and the other isn't. This patch does that and fixes the fallout.
Originally I'd tried to make it so that "X *" and "Y *" are
interconvertible whenever X and Y are, and similarly for
"X &" and "Y &". That doesn't fall out naturally though,
and is different from how -flax-vector-conversions works.
The patch therefore accepts all the consequences of making
X and Y !same_type_p instead of trying to work around them.
2019-12-23 Richard Sandiford <richard.sandiford@arm.com>
gcc/cp/
PR c++/92789
* typeck.c (structural_comptypes): Make sure that two vector types
agree on gnu_vector_type_p.
gcc/testsuite/
PR c++/92789
* g++.dg/ext/sve-sizeless-2.C (statements): Expect pointer
difference and comparisons between GNU and non-GNU types
to be rejected. Expect __is_same to be false for such pairs.
* g++.target/aarch64/sve/acle/general-c++/gnu_vectors_1.C: Remove
XFAILs. Expect conversions between SVE vector pointers and
GNU vector pointers to be rejected. Test references.
* g++.target/aarch64/sve/acle/general-c++/gnu_vectors_2.C: Likewise.
From-SVN: r279717
Richard Sandiford [Mon, 23 Dec 2019 09:43:35 +0000 (09:43 +0000)]
[C++] Fix ICE for binding lax vector conversions to references (PR 93014)
This test:
typedef unsigned int v4si __attribute__ ((vector_size(16)));
typedef unsigned char v16qi __attribute__ ((vector_size(16)));
extern v16qi x;
v4si &y = x;
ICEs with:
a.c:4:11: internal compiler error: in convert_like_real, at cp/call.c:7670
This started with r260780, which had the effect of making lvalue_kind
look through VIEW_CONVERT_EXPR in all cases, not just for location
wrappers. This also means that:
typedef unsigned int v4si __attribute__ ((vector_size(16)));
typedef unsigned char v16qi __attribute__ ((vector_size(16)));
extern v16qi x;
v4si &y = reinterpret_cast<v4si>(x);
is now valid despite the result of the cast being an rvalue.
The patch attempts to fix that by calling rvalue on the input to the
conversion, so that the tree looks the same as for:
extern v16qi x;
v4si &y = (v4si)x;
which is already handled correctly.
2019-12-23 Richard Sandiford <richard.sandiford@arm.com>
gcc/cp/
* cvt.c (ocp_convert): Apply rvalue to the source of vector
conversions.
* typeck.c (build_reinterpret_cast_1): Likewise.
gcc/testsuite/
* g++.dg/ext/vector39.C: New test.
From-SVN: r279716
GCC Administrator [Mon, 23 Dec 2019 00:16:14 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279715
Maciej W. Rozycki [Sun, 22 Dec 2019 19:54:09 +0000 (19:54 +0000)]
Add OpenACC 2.6 `acc_get_property' support
Add generic support for the OpenACC 2.6 `acc_get_property' and
`acc_get_property_string' routines, as well as full handlers for the
host and the NVPTX offload targets and minimal handlers for the HSA,
Intel MIC, and AMD GCN offload targets.
Included are C/C++ and Fortran tests that, in particular, print
the property values for acc_property_vendor, acc_property_memory,
acc_property_free_memory, acc_property_name, and acc_property_driver.
The output looks as follows:
Vendor: GNU
Name: GOMP
Total memory: 0
Free memory: 0
Driver: 1.0
with the host driver (where the memory related properties are not
supported for the host device and yield 0, conforming to the standard)
and output like:
Vendor: Nvidia
Total memory:
12651462656
Free memory:
12202737664
Name: TITAN V
Driver: CUDA Driver 9.1
with the NVPTX driver.
2019-12-22 Maciej W. Rozycki <macro@codesourcery.com>
Frederik Harwath <frederik@codesourcery.com>
Thomas Schwinge <tschwinge@codesourcery.com>
include/
* gomp-constants.h (gomp_device_property): New enum.
libgomp/
* libgomp.h (gomp_device_descr): Add `get_property_func' member.
* libgomp-plugin.h (gomp_device_property_value): New union.
(gomp_device_property_value): New prototype.
* openacc.h (acc_device_t): Add `acc_device_current' enumeration
constant.
(acc_device_property_t): New enum.
(acc_get_property, acc_get_property_string): New prototypes.
* oacc-init.c (acc_get_device_type): Also assert that result
is not `acc_device_current'.
(get_property_any, acc_get_property, acc_get_property_string):
New functions.
* openacc.f90 (openacc_kinds): Add `acc_device_current' and
`acc_property_memory', `acc_property_free_memory',
`acc_property_name', `acc_property_vendor' and
`acc_property_driver' constants. Add `acc_device_property' data
type.
(openacc_internal): Add `acc_get_property' and
`acc_get_property_string' interfaces. Add `acc_get_property_h',
`acc_get_property_string_h', `acc_get_property_l' and
`acc_get_property_string_l'.
* oacc-host.c (host_get_property): New function.
(host_dispatch): Wire it.
* target.c (gomp_load_plugin_for_device): Handle `get_property'.
* libgomp.map (OACC_2.6): Add `acc_get_property', `acc_get_property_h_',
`acc_get_property_string' and `acc_get_property_string_h_' symbols.
* libgomp.texi (OpenACC Runtime Library Routines): Add
`acc_get_property'.
(acc_get_property): New node.
* plugin/plugin-gcn.c (GOMP_OFFLOAD_get_property): New
function (stub).
* plugin/plugin-hsa.c (GOMP_OFFLOAD_get_property): New function.
* plugin/plugin-nvptx.c (CUDA_CALLS): Add `cuDeviceGetName',
`cuDeviceTotalMem', `cuDriverGetVersion' and `cuMemGetInfo'
calls.
(GOMP_OFFLOAD_get_property): New function.
(struct ptx_device): Add new field "name".
(cuda_driver_version_s): Add new static variable ...
(nvptx_init): ... and init from here.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property.c: New test.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-2.c: New test.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-3.c: New test.
* testsuite/libgomp.oacc-c-c++-common/acc_get_property-aux.c: New file
with test helper functions.
* testsuite/libgomp.oacc-fortran/acc_get_property.f90: New test.
liboffloadmic/
* plugin/libgomp-plugin-intelmic.cpp (GOMP_OFFLOAD_get_property):
New function.
Reviewed-by: Thomas Schwinge <thomas@codesourcery.com>
Co-Authored-By: Frederik Harwath <frederik@codesourcery.com>
Co-Authored-By: Thomas Schwinge <tschwinge@codesourcery.com>
From-SVN: r279710
Andrew Pinski [Sun, 22 Dec 2019 01:35:08 +0000 (01:35 +0000)]
Restrict some aarch64 testcases to little-endian
2019-12-21 Andrew Pinski <apinski@marvell.com>
PR testsuite/92998
* gcc.target/aarch64/sve/acle/general/dupq_1.c:
Restrict to aarch64_little_endian only.
* gcc.target/aarch64/torture/simd-abi-8.c:
Likewise.
From-SVN: r279709
Maciej W. Rozycki [Sun, 22 Dec 2019 00:41:36 +0000 (00:41 +0000)]
libgomp/test: Fix compilation for build sysroot
Fix a problem with the libgomp testsuite using a method to determine
the compiler to use resulting in the tool being different from one the
library has been built with, and causing a catastrophic failure from the
lack of a suitable `--sysroot=' option where the `--with-build-sysroot='
configuration option has been used to build the compiler resulting in
the inability to link executables.
Address this problem by defining the compiler to use, via the
GCC_UNDER_TEST TCL variable, set in the DejaGNU configuration file from
$CC by autoconf, which will have all the required options set for the
target compiler to build executables in the environment configured,
removing failures like:
.../bin/riscv64-linux-gnu-ld: cannot find crt1.o: No such file or directory
.../bin/riscv64-linux-gnu-ld: cannot find -lm
.../bin/riscv64-linux-gnu-ld: cannot find -lpthread
.../bin/riscv64-linux-gnu-ld: cannot find -lc
.../bin/riscv64-linux-gnu-ld: cannot find -latomic
collect2: error: ld returned 1 exit status
compiler exited with status 1
FAIL: libgomp.c/../libgomp.c-c++-common/atomic-18.c (test for excess errors)
Excess errors:
.../bin/riscv64-linux-gnu-ld: cannot find crt1.o: No such file or directory
.../bin/riscv64-linux-gnu-ld: cannot find -lm
.../bin/riscv64-linux-gnu-ld: cannot find -lpthread
.../bin/riscv64-linux-gnu-ld: cannot find -lc
.../bin/riscv64-linux-gnu-ld: cannot find -latomic
UNRESOLVED: libgomp.c/../libgomp.c-c++-common/atomic-18.c compilation failed to produce executable
and bringing overall test results for the `riscv64-linux-gnu' target
(here with the `x86_64-linux-gnu' host and RISC-V QEMU in the Linux user
emulation mode as the target board) from:
=== libgomp Summary ===
# of expected passes 44
# of unexpected failures 3274
# of unresolved testcases 3241
# of unsupported tests 548
to:
=== libgomp Summary ===
# of expected passes 6834
# of unexpected failures 4
# of expected failures 4
# of unsupported tests 518
libgomp/
* testsuite/libgomp-test-support.exp.in (GCC_UNDER_TEST): New
variable.
From-SVN: r279708
Gerald Pfeifer [Sun, 22 Dec 2019 00:28:57 +0000 (00:28 +0000)]
* doc/invoke.texi (-flto): Use "compile time" as a noun.
From-SVN: r279707
Maciej W. Rozycki [Sun, 22 Dec 2019 00:28:20 +0000 (00:28 +0000)]
testsuite: Fix run-time tracking down of `libgcc_s'
Fix a catastrophic libgo testsuite failure in cross-compilation where
the shared `libgcc_s' library cannot be found by the loader at run time
in build-tree testing and consequently all test cases fail the execution
stage, giving output (here with the `x86_64-linux-gnu' host and the
`riscv64-linux-gnu' target, with RISC-V QEMU in the Linux user emulation
mode as the target board) like:
spawn qemu-riscv64 -E LD_LIBRARY_PATH=.:.../riscv64-linux-gnu/lib64/lp64d/libgo/.libs ./a.exe
./a.exe: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory
FAIL: archive/tar
To do so rework `gcc-set-multilib-library-path' so as not to rely on the
`rootme' TCL variable to have been preset in testsuite invocation, which
only works for the GCC test suites and not for library test suites, and
also use `remote_exec host' rather than `exec' to invoke the compiler in
determination of `libgcc_s' locations, so that the solution works in
remote testing as well while also avoiding the hardcoded limit of the
executable's path length imposed by `exec'.
This is based on an observation that the multilib root directory can be
determined by stripping out the multilib directory in effect as printed
with the `-print-multi-directory' option from the path produced by the
`-print-file-name=' option. And then individual full multilib paths can
be assembled for the other multilibs by appending their respective
multilib directories to the multilib root directory.
Unlike with the old solution the full multilib paths are not checked for
the presence of the shared `libgcc_s' library there, but that is
supposed to be harmless. Also the full multilib path for the multilib
used with the compiler used for testing will now come first, which
should reduce run-time processing in the usual case.
With this change in place test output instead looks like:
spawn qemu-riscv64 -E LD_LIBRARY_PATH=.:.../riscv64-linux-gnu/lib64/lp64d/libgo/.libs:..././gcc/lib64/lp64d:..././gcc/.:..././gcc/lib32/ilp32:..././gcc/lib32/ilp32d:..././gcc/lib64/lp64 ./a.exe
PASS
PASS: archive/tar
No summary comparison, because the libgo testsuite does not provide one
in this configuration for some reason, however this change improves
overall results from 0 PASSes and 159 FAILs to 133 PASSes and 26 FAILs.
gcc/testsuite/
* lib/gcc-defs.exp (gcc-set-multilib-library-path): Use
`-print-file-name=' to determine the multilib root directory.
Use `remote_exec host' rather than `exec' to invoke the
compiler.
From-SVN: r279706
GCC Administrator [Sun, 22 Dec 2019 00:16:16 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279705
Maciej W. Rozycki [Sun, 22 Dec 2019 00:15:44 +0000 (00:15 +0000)]
libada: Fix shared library installation with `--disable-libada'
Provide a default value of $(toolexeclibdir) for $(ADA_RTL_DSO_DIR), so
that in a `--disable-libada' configuration `make install' places shared
gnatlib libraries, built with `make -C gcc gnatlib-shared', in their
intended version-specific location, fixing a commit r276424 ("libada:
Respect `--enable-version-specific-runtime-libs'") regression.
gcc/ada/
* gcc-interface/Makefile.in (toolexeclibdir): New variable.
From-SVN: r279702
Thomas Schwinge [Sat, 21 Dec 2019 22:58:43 +0000 (23:58 +0100)]
[OMP] Restore 'omp declare target link' handling
PASS: libgomp.c/target-link-1.c (test for excess errors)
[-PASS:-]{+FAIL:+} libgomp.c/target-link-1.c execution test
We need to revert one line of code change from r279625.
libgomp/
* target.c (gomp_map_vars_internal): Restore 'omp declare target
link' handling.
From-SVN: r279701
Thomas Schwinge [Sat, 21 Dec 2019 21:32:36 +0000 (22:32 +0100)]
[PR93026, PR92929] Adjust 'gfortran.dg/goacc/finalize-1.f' for r279626 changes
gcc/testsuite/
PR fortran/93026
PR middle-end/92929
* gfortran.dg/goacc/finalize-1.f: Adjust.
From-SVN: r279700
Harald Anlauf [Sat, 21 Dec 2019 20:42:14 +0000 (20:42 +0000)]
re PR fortran/91661 (ICE in gfc_conv_intrinsic_dot_product, at fortran/trans-intrinsic.c:4804)
2019-12-21 Harald Anlauf <anlauf@gmx.de>
PR fortran/91661
* gfortran.dg/pr91661.f90: New test.
From-SVN: r279699
Harald Anlauf [Sat, 21 Dec 2019 20:25:43 +0000 (20:25 +0000)]
re PR fortran/92990 (INVALID code with NULLIFY – partially misleading error message "If bounds remapping is specified at (1), the pointer target shall not be NULL")
2019-12-21 Harald Anlauf <anlauf@gmx.de>
PR fortran/92990
* match.c (gfc_match_nullify): Check for valid pointer object.
Reject bounds remapping.
PR fortran/92990
* gfortran.dg/pr92990.f90: New test.
From-SVN: r279698
Paul Thomas [Sat, 21 Dec 2019 16:19:42 +0000 (16:19 +0000)]
re PR fortran/92753 (ICE in gfc_trans_call, at fortran/trans-stmt.c:392)
2019-12-21 Paul Thomas <pault@gcc.gnu.org>
PR fortran/92753
* expr.c (find_inquiry_ref): Catch INQUIRY_LEN case, where the
temporary expression has been converted to a constant and make
the new expression accordingly. Correct the error in INQUIRY_RE
and INQUIRY_IM cases. The original rather than the resolved
expression was being used as the source in mpfr_set.
2019-12-21 Paul Thomas <pault@gcc.gnu.org>
PR fortran/92753
* gfortran.dg/inquiry_type_ref_5.f90 : New test.
From-SVN: r279696
Martin Jambor [Sat, 21 Dec 2019 11:25:05 +0000 (12:25 +0100)]
Avoid segfault when doing IPA-VRP but not IPA-CP (PR 93015)
2019-12-21 Martin Jambor <mjambor@suse.cz>
PR ipa/93015
* ipa-cp.c (ipcp_store_vr_results): Check that info exists
testsuite/
* gcc.dg/lto/pr93015_0.c: New test.
From-SVN: r279695
GCC Administrator [Sat, 21 Dec 2019 00:16:17 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r279690
Jakub Jelinek [Fri, 20 Dec 2019 23:51:15 +0000 (00:51 +0100)]
re PR middle-end/91512 (Fortran compile time regression.)
PR middle-end/91512
PR fortran/92738
* lang.opt (-finline-arg-packing): Add trailing dot to help text.
From-SVN: r279687
Marek Polacek [Fri, 20 Dec 2019 23:30:04 +0000 (23:30 +0000)]
PR c++/92745 - bogus error when initializing array of vectors.
In r268428 I changed reshape_init_r in such a way that when it sees
a nested { } in a CONSTRUCTOR with missing braces, it just returns
the initializer:
+ else if (COMPOUND_LITERAL_P (stripped_init)
...
+ ++d->cur;
+ gcc_assert (!BRACE_ENCLOSED_INITIALIZER_P (stripped_init));
+ return init;
But as this test shows, that's incorrect: if TYPE is an array, we need
to proceed to reshape_init_array_1 which will iterate over the array
initializers:
6006 /* Loop until there are no more initializers. */
6007 for (index = 0;
6008 d->cur != d->end && (!sized_array_p || index <= max_index_cst);
6009 ++index)
6010 {
and update d.cur accordingly. In other words, when reshape_init gets
{{col[0][0], col[1][0], col[2][0], col[3][0]},
{col[0][1], col[1][1], col[2][1], col[3][1]},
{col[0][2], col[1][2], col[2][2], col[3][2]},
{col[0][3], col[1][3], col[2][3], col[3][3]}}
we recurse on the first element:
{col[0][0], col[1][0], col[2][0], col[3][0]}
and we can't just move d.cur to point to
{col[0][1], col[1][1], col[2][1], col[3][1]}
and return; we need to iterate, so that d.cur ends up being properly
updated, and after all initializers have been seen, points to d.end.
Currently we skip the loop, wherefore we hit this:
6502 /* Make sure all the element of the constructor were used. Otherwise,
6503 issue an error about exceeding initializers. */
6504 if (d.cur != d.end)
6505 {
6506 if (complain & tf_error)
6507 error ("too many initializers for %qT", type);
6508 return error_mark_node;
6509 }
* decl.c (reshape_init_r): For a nested compound literal, do
call reshape_init_{class,array,vector}.
* g++.dg/cpp0x/initlist118.C: New test.
From-SVN: r279686
Marek Polacek [Fri, 20 Dec 2019 23:25:44 +0000 (23:25 +0000)]
PR c++/92974 - bogus location for enum and non-enum in ?: warning.
build_min_non_dep wasn't setting any location so when we were emitting the
warning in the following test while instantiating a template, its location
was UNKNOWN_LOCATION. Rather than adding a location_t parameter, let's use
the location from the original expression.
* tree.c (build_min_non_dep): Use the location of NON_DEP when
building the expression.
* g++.dg/diagnostic/enum1.C: New test.
* g++.dg/gomp/loop-2.C: Adjust dg-error.
* g++.dg/gomp/for-21.C: Likewise.
From-SVN: r279685
Jakub Jelinek [Fri, 20 Dec 2019 23:21:21 +0000 (00:21 +0100)]
re PR c++/92965 ("note: 'x' is not public" emitted even when no error is emitted)
PR c++/92965
* pt.c (invalid_nontype_parm_type_p): Call structural_type_p with
explain=true only if emitting error.
* g++.dg/cpp2a/nontype-class27.C: New test.
From-SVN: r279684
Jakub Jelinek [Fri, 20 Dec 2019 23:19:23 +0000 (00:19 +0100)]
re PR c++/92966 (Segfault on defaulted operator== with wrong return type)
PR c++/92966
* method.c (early_check_defaulted_comparison): Don't set
DECL_MAYBE_DELETED when returning false.
* g++.dg/cpp2a/spaceship-eq8.C: New test.
From-SVN: r279683
Jakub Jelinek [Fri, 20 Dec 2019 23:18:09 +0000 (00:18 +0100)]
re PR c++/92973 (Silently accepting defaulted comparison operators in C++11 .. 17)
PR c++/92973
* method.c (early_check_defaulted_comparison): For C++17 and earlier
diagnose defaulted comparison operators.
* g++.dg/cpp0x/spaceship-eq1.C: New test.
From-SVN: r279682
Jakub Jelinek [Fri, 20 Dec 2019 23:16:58 +0000 (00:16 +0100)]
re PR c++/92666 (bogus -Wunused-but-set-variable in gcov.c with -Wno-restrict)
PR c++/92666
* call.c (convert_arg_to_ellipsis): For floating point or
decltype(nullptr) arguments call mark_rvalue_use.
* g++.dg/warn/Wunused-var-36.C: New test.
From-SVN: r279681
Jakub Jelinek [Fri, 20 Dec 2019 23:15:52 +0000 (00:15 +0100)]
re PR c++/92992 (Side-effects dropped when decltype(nullptr) typed expression is passed to ellipsis)
PR c++/92992
* call.c (convert_arg_to_ellipsis): For decltype(nullptr) arguments
that have side-effects use cp_build_compound_expr.
* g++.dg/cpp0x/nullptr45.C: New test.
From-SVN: r279680
Michael Meissner [Fri, 20 Dec 2019 19:27:47 +0000 (19:27 +0000)]
Rename signed integer 16/34-bit macros.
2019-12-20 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/predicates.md (cint34_operand): Use
SIGNED_INTEGER_34BIT_P macro.
* config/rs6000/rs6000.c (num_insns_constant_gpr): Use the
SIGNED_INTEGER_16BIT_P and SIGNED_INTEGER_34BIT_P macros.
(address_to_insn_form): Use the SIGNED_INTEGER_16BIT_P and
SIGNED_INTEGER_34BIT_P macros.
* config/rs6000/rs6000.h (SIGNED_INTEGER_NBIT_P): New macro.
(SIGNED_INTEGER_16BIT_P): Rename SIGNED_16BIT_OFFSET_P to be
SIGNED_INTEGER_34BIT_P.
(SIGNED_INTEGER_34BIT_P): Rename SIGNED_34BIT_OFFSET_P to be
SIGNED_INTEGER_34BIT_P.
From-SVN: r279677
Eric Botcazou [Fri, 20 Dec 2019 17:41:06 +0000 (17:41 +0000)]
c-ada-spec.h (decl_sloc): Delete.
c-family/
* c-ada-spec.h (decl_sloc): Delete.
* c-ada-spec.c (decl_sloc): Make static.
c/
* c-decl.c (collect_source_ref_cb): Delete.
(for_each_global_decl): Rename into...
(collect_source_refs): ...this. Call collect_source_ref directly.
(c_parse_final_cleanups): Always call collect_source_ref on the main
input filename.
cp/
* decl2.c (c_parse_final_cleanups): Always call collect_source_ref on
the main input filename.
From-SVN: r279670
Jonathan Wakely [Fri, 20 Dec 2019 17:10:22 +0000 (17:10 +0000)]
fortran: Fix PR number in comment of testcase for PR 69497
The testcase was originally committed with an incorrect changelog and PR
number. The changelog was fixed later, but not the comment in the test.
PR fortran/69497
* gfortran.dg/pr69497.f90: Fix PR number in comment.
From-SVN: r279657
Jonathan Wakely [Fri, 20 Dec 2019 17:10:18 +0000 (17:10 +0000)]
libstdc++: Add inline to maybe-constexpr functions (PR 92927)
Originally these functions were always inline. I changed them in r277342
to be always constexpr, then in r277588 changed them to be constexpr for
C++14, but I didn't restore the 'inline' for C++11. That leads to linker
errors when libstdc++.so is built unoptimized, because those functions
don't get instantiated in src/c++11/string-inst.o
PR libstdc++/92927
* include/bits/alloc_traits.h (__alloc_on_copy, __alloc_on_move)
(__alloc_on_swap): Add inline specifier.
From-SVN: r279656
Stam Markianos-Wright [Fri, 20 Dec 2019 15:52:39 +0000 (15:52 +0000)]
gcc/testsuite/ChangeLog:
2019-12-20 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* lib/target-supports.exp
(check_effective_target_arm_v8_2a_i8mm_ok_nocache): New.
(check_effective_target_arm_v8_2a_i8mm_ok): New.
(add_options_for_arm_v8_2a_i8mm): New.
(check_effective_target_arm_v8_2a_bf16_neon_ok_nocache): New.
(check_effective_target_arm_v8_2a_bf16_neon_ok): New.
(add_options_for_arm_v8_2a_bf16_neon): New.
gcc/Changelog:
2019-12-20 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* doc/sourcebuild.texi
(arm_v8_2a_bf16_neon_ok): Document new target supports option.
(arm_v8_2a_i8mm_ok): Likewise.
From-SVN: r279648
Roman Zhuykov [Fri, 20 Dec 2019 15:40:46 +0000 (15:40 +0000)]
Rename tests to reference the correct PR
2019-12-20 Roman Zhuykov <zhroma@ispras.ru>
* gcc.dg/pr92951-1.c: Rename to ...
* gcc.dg/pr92591-1.c: ... this.
* gcc.dg/pr92951-2.c: Rename to ...
* gcc.dg/pr92591-2.c: ... this.
From-SVN: r279645
Jerome Lambourg [Fri, 20 Dec 2019 15:30:41 +0000 (15:30 +0000)]
libstdc++: Test setrlimit with c++ in configure
* acinclude.m4 (GLIBCXX_CHECK_SETRLIMIT): Test with AC_LANG_CPLUSPLUS.
* configure: Regenerate.
From-SVN: r279644
François Dumont [Fri, 20 Dec 2019 13:24:52 +0000 (13:24 +0000)]
libstdc++: Fix versioned namespace tests
* testsuite/23_containers/map/48101_neg.cc: Add versioned namespace
pattern to tested error message.
* testsuite/23_containers/multimap/48101_neg.cc: Likewise.
* testsuite/30_threads/headers/stop_token/synopsis.cc: Add
dg-require-normal-namepace.
From-SVN: r279641
François Dumont [Fri, 20 Dec 2019 12:42:50 +0000 (12:42 +0000)]
libstdc++: Fix pretty printers script and tests
* python/libstdcxx/v6/printers.py (lookup_node_type): Remove redundant
call to lookup_node_type.
* testsuite/libstdc++-prettyprinters/80276.cc: Define
_GLIBCXX_USE_CXX11_ABI to 0.
* testsuite/libstdc++-prettyprinters/91997.cc: Use regexp-test to check
'a' content.
From-SVN: r279640
Thomas Koenig [Fri, 20 Dec 2019 11:51:05 +0000 (11:51 +0000)]
Introduce -finline-arg-packing.
2019-12-20 Thomas Koenig <tkoenig@gcc.gnu.org>
PR middle-end/91512
PR fortran/92738
* invoke.texi: Document -finline-arg-packing.
* lang.opt: Add -finline-arg-packing.
* options.c (gfc_post_options): Handle -finline-arg-packing.
* trans-array.c (gfc_conv_array_parameter): Use
flag_inline_arg_packing instead of checking for optimize and
optimize_size.
2019-12-20 Thomas Koenig <tkoenig@gcc.gnu.org>
PR middle-end/91512
PR fortran/92738
* gfortran.dg/inline_pack_25.f90: New test.
From-SVN: r279639
Tobias Burnus [Fri, 20 Dec 2019 11:35:20 +0000 (11:35 +0000)]
Fortran] PR 92996 – fix rank resolution EXPR_ARRAY
PR fortran/92996
gcc/fortran/
* expr.c (simplify_parameter_variable): Call gfc_resolve_ref and
gfc_expression_rank; fix location info.
* gfortran.h (gfc_resolve_ref, gfc_expression_rank): Declare.
* match.c (gfc_match_stopcode): Remove redundant setting of
gfc_init_expr_flag; early return if gfc_simplify_expr has an error.
* resolve.c (gfc_expression_rank): Renamed from expression_rank;
minor cleanup.
(gfc_resolve_ref): Removed static and renamed from resolve_ref.
(resolve_variable, resolve_typebound_function,
resolve_typebound_subroutine, resolve_ppc_call, resolve_expr_ppc,
gfc_resolve_expr, resolve_procedure): Update calls.
PR fortran/92996
gcc/testsuite/
* gfortran.dg/array_simplify_4.f90: New.
* gfortran.dg/pr91565.f90: Update dg-error.
* gfortran.dg/pr91801.f90: Likewise.
From-SVN: r279638
Tobias Burnus [Fri, 20 Dec 2019 11:22:52 +0000 (11:22 +0000)]
Improve is-coindexed check for OpenACC/OpenMP
gcc/fortran/
* openmp.c (resolve_omp_clauses): Move is-coindexed check from here ...
(gfc_match_omp_variable_list): ... to here.
gcc/testsuite/
* gfortran.dg/goacc/coindexed-1.f90: New.
From-SVN: r279637
Jerome Lambourg [Fri, 20 Dec 2019 10:43:47 +0000 (10:43 +0000)]
Add myself to MAINTAINERS
From-SVN: r279636
Jerome Lambourg [Fri, 20 Dec 2019 09:30:48 +0000 (09:30 +0000)]
libstdc++: Strengthen the check for availability of pthread_rwlock_t
* acinclude.m4 (_GLIBCXX_USE_PTHREAD_RWLOCK_T): Checks that
_PTHREADS is defined after including gthr.h.
* configure: Regenerate.
From-SVN: r279635
Tobias Burnus [Fri, 20 Dec 2019 09:30:24 +0000 (10:30 +0100)]
Fix testsuite-fallout of OpenACC deep-copy patch
gcc/testsuite/
* gfortran.dg/goacc/data-clauses.f95: Remove now
obsolete dg-error.
From-SVN: r279634
Jakub Jelinek [Fri, 20 Dec 2019 08:23:42 +0000 (09:23 +0100)]
re PR target/92841 (Optimize -fstack-protector-strong code generation a bit)
PR target/92841
* config/i386/i386.md (*stack_protect_set_3): For pic_32bit_operand
always use lea{q}, no matter what value which_alternative has.
* gcc.target/i386/pr92841-2.c: New test.
From-SVN: r279633