Fix ChangeLog entry

* gdb/ada-lang.c (standard_lookup): Prevent uninitialized variable
warning.

*** empty log message ***

* linux-low.c (get_r_debug): Disable code using DT_MIPS_RLD_MAP
if the platform doesn't know about it.

2012-05-30  Jeff Kenton  <jkenton@tilera.com>

* Makefile.in (SFILES): Add linux-tile-low.c.
(linux-tile-low.o, reg-tilegx.o, reg-tilegx.c): New rules.
* configure.srv: Handle tilegx-*-linux*.
* linux-tile-low.c: New file.

2012-05-30  Jeff Kenton  <jkenton@tilera.com>

* configure.host (gdb_host_cpu): Handle tilegx*.
(gdb_host): Handle tilegx-*-linux*.
* tilegx-linux-nat.c: New file.
* config/tilegx/linux.mh: New file.

2012-05-30  Jeff Kenton  <jkenton@tilera.com>

* Makefile.in (ALL_TARGET_OBJS): Add tilegx-tdep.o and
tilegx-linux-tdep.o.
(ALLDEPFILES): Add tilegx-linux-nat.c, tilegx-tdep.c and
tilegx-linux-tdep.c.
* configure.tgt: Handle tilegx-*-linux*.
* tilegx-tdep.h: New file.
* tilegx-tdep.c: New file.
* tilegx-linux-tdep.c: New file.
* regformats/reg-tilegx.dat: New file.

* readelf.c (process_section_headers): Correct bug in previous
delta - display full section type in wide mode.

* ld-tic6x/shlib-1b.rd: Revert previous delta.
* ld-tic6x/shlib-1rb.rd: Likewise.
* ld-tic6x/shlib-1.rd: Likewise.
* ld-tic6x/shlib-1r.rd: Likewise.
* ld-tic6x/shlib-app-1b.rd: Likewise.
* ld-tic6x/shlib-app-1rb.rd: Likewise.
* ld-tic6x/shlib-app-1.rd: Likewise.
* ld-tic6x/shlib-app-1r.rd: Likewise.
* ld-tic6x/shlib-noindex.rd: Likewise.
* ld-tic6x/static-app-1b.rd: Likewise.
* ld-tic6x/static-app-1rb.rd: Likewise.
* ld-tic6x/static-app-1.rd: Likewise.
* ld-tic6x/static-app-1r.rd: Likewise.

* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): fix
accounting of hw watchpoints on ppc.

* ldlang.h (lang_output_section_statement_type): Rename
"section_relative_symbol" field to "update_dot".
* ldlang.c: Update all uses.
(strip_excluded_output_sections): Don't test update_dot_tree here..
(lang_leave_overlay): ..set update_dot here.

* source.c (openp): Expand tilde in path entries.

*** empty log message ***

daily update

* buildsym.c (block_compar): Fix comment.
(end_symtab): Fix and clarify some comments.

* stabsread.h (cleanup_undefined_stabs_types): Renamed from
cleanup_undefined_types.
* stabsread.c (cleanup_undefined_stabs_types): Ditto.
All callers updated.

gas/
* read.c [HANDLE_BUNDLE] (bundle_lock_depth): New variable.
(read_a_source_file) [HANDLE_BUNDLE]: Reset it.
[HANDLE_BUNDLE] (s_bundle_lock, s_bundle_unlock): Allow nested
pairs.

gas/testsuite/
* gas/i386/bundle-bad.s: Remove nested .bundle_lock case.
* gas/i386/bundle-bad.l: Remove expected error line.
* gas/i386/bundle-lock.s: Add nested .bundle_lock case.
* gas/i386/bundle-lock.d: Update expectations.

Resync config/ from GCC.

* ld-tic6x/shlib-1b.rd: Update expected readelf output.
* ld-tic6x/shlib-1rb.rd: Likewise.
* ld-tic6x/shlib-1.rd: Likewise.
* ld-tic6x/shlib-1r.rd: Likewise.
* ld-tic6x/shlib-app-1b.rd: Likewise.
* ld-tic6x/shlib-app-1rb.rd: Likewise.
* ld-tic6x/shlib-app-1.rd: Likewise.
* ld-tic6x/shlib-app-1r.rd: Likewise.
* ld-tic6x/shlib-noindex.rd: Likewise.
* ld-tic6x/static-app-1b.rd: Likewise.
* ld-tic6x/static-app-1rb.rd: Likewise.
* ld-tic6x/static-app-1.rd: Likewise.
* ld-tic6x/static-app-1r.rd: Likewise.

bfd/
* opncls.c (bfd_fopen): Always close fd on failure.
(bfd_fdopenr): Likewise.
gdb/
* symfile.c (symfile_bfd_open): Don't close desc if bfd_fopen
fails.
* solib.c (solib_bfd_fopen): Don't close fd if bfd_fopen fails.
* exec.c (exec_file_attach): Don't close scratch_chan if bfd_fopen
fails.
* dwarf2read.c (try_open_dwo_file): Don't close fd if bfd_fopen
fails.

2012-05-29  Tristan Gingold  <gingold@adacore.com>

* solib-darwin.c (dyld_all_image_addr, dyld_all_image): Move into...
(struct darwin_info): ... New struct.
(solib_darwin_pspace_data): New variable.
(darwin_pspace_data_cleanup): New function.
(get_darwin_info): Likewise.
(darwin_dyld_version_ok, darwin_load_image_infos)
(darwin_solib_get_all_image_info_addr_at_init)
(darwin_solib_read_all_image_info_addr): Add info argument.
Adjust code.
(darwin_current_sos): Use per pspace structure.
(darwin_solib_create_inferior_hook): Likewise.
(darwin_clear_solib): Likewise.
(_initialize_darwin_solib): Initialize solib_darwin_pspace_data.

*** empty log message ***

daily update

2012-05-28  Pedro Alves  <palves@redhat.com>

* infrun.c (wait_for_inferior): Move ecss and ecs locals to the
block that uses them.  Clear ecss before handling each event.

gdb/
* solib-svr4.c (svr4_current_sos): New comment on
svr4_current_sos_via_xfer_libraries fall back.

gdb/gdbserver/
* linux-low.c (linux_qxfer_libraries_svr4): Return -1 if R_DEBUG is -1.

gdb/testsuite/
* gdb.server/solib-list-lib.c: New file.
* gdb.server/solib-list-main.c: New file.
* gdb.server/solib-list.exp: New file.

* read.c (read_symbol_name): New function.  Reads a symbol names.
Allows escape codes in names.
(s_comm_internal): Use read_symbol_name.
(s_globl, s_lsym, s_set, s_weakref): Likewise.
* doc/as.texinfo: Document support for multibyte characters in
symbol names.

* gas/elf/syms.s: New test - checks the generation of multibyte
symbol names.
* gas/elf/syms.d: New file - expected readelf output.
* gas/elf/elf.exp: Add syms.

* readelf.c (print_symbol): Display multibyte characters in symbol
names.
(process_section_headers): Use print_symbol.

* ld-ifunc/ifunc-13a-i386.s: Fix use of .global directive.
* ld-ifunc/ifunc-15a-i385.s: Likewise.

PR ld/14170
* ld-elf/pr14170a.s: Put foo, bar address in .data.
* ld-elf/elf.exp: Don't run pr14170 test on hppa64-hpux.  Ignore
tic6x warnings.

*** empty log message ***

daily update

Add a test for PR ld/14170

PR ld/14170
* ld-elf/elf.exp: Add a test for PR ld/14170.

* ld-elf/pr14170a.s: New file.
* ld-elf/pr14170b.s: Likewise.
* ld-elf/pr14170b.s: Likewise.

PR ld/14170
* elflink.c (_bfd_elf_merge_symbol): When a symbol defined in
a dynamic library finds a new instance with non-default
visibility in a regular object, correctly handle symbols
already on the undefs list and undo dynamic symbol state when
the new symbol is hidden or internal.

*** empty log message ***

daily update

ld/
* ldlex.h (enum option_values): Move from..
* lexsup.c: ..here.
* emultempl/ppc32elf.em: Include ldlex.h.
(PARSE_AND_LIST_ARGS_CASES): Disable optimisations when
--traditional-format.
* emultempl/ppc64elf.em: Likewise.
ld/testsuite/
* ld-srec/srec.exp: Remove powerpc64 flag setting.

daily update

*** empty log message ***

2012-05-25  Sriraman Tallam  <tmsriram@google.com>

* symtab.cc (Symbol_table::define_special_symbol):
Initialize *poldsym to prevent uninitialized variable errors.

* gdb.trace/unavailable.exp (gdb_collect_globals_test): Update
for 'set print symbol' change.

Don't use dynamic_sec_flags on PLT .eh_frame section

* elf32-i386.c (elf_i386_create_dynamic_sections): Don't use
dynamic_sec_flags to create PLT .eh_frame section.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Likewise.

PR ld/13909
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Handle
multiple .eh_frame sections attached to bfd.

PR ld/13909
* elf-eh-frame.c (_bfd_elf_eh_frame_present): New function.
(_bfd_elf_maybe_strip_eh_frame_hdr): Use it here.
* elf-bfd.h (_bfd_elf_eh_frame_present): Declare.
* elflink.c (bfd_elf_size_dynamic_sections): Let the backend
size dynamic sections before stripping eh_frame_hdr.
(bfd_elf_gc_sections): Handle multiple .eh_frame sections.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Drop glink_eh_frame
if no other .eh_frame sections exist.
* elf64-ppc.c (ppc64_elf_size_stubs): Likewise.
* elf32-i386.c (elf_i386_create_dynamic_sections): Don't size
or alloc plt_eh_frame here..
(elf_i386_size_dynamic_sections): ..do it here instead.  Don't
specially keep sgotplt, iplt, tgotplt, sdynbss for symbols.
(elf_i386_finish_dynamic_sections): Check plt_eh_frame->contents
before writing plt offset.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Don't size
or alloc plt_eh_frame here..
(elf_x86_64_size_dynamic_sections): ..do it here instead.
(elf_x86_64_finish_dynamic_sections): Check plt_eh_frame->contents
before writing plt offset.

daily update

*** empty log message ***

gdb/
* psymtab.c (lookup_symbol_aux_psymtabs): New variable stab_best.  Use
it as a fallback for TYPE_IS_OPAQUE.
* symfile.h (struct quick_symbol_functions): Mention TYPE_OPAQUE
symbols for lookup_symbol.

gdb/testsuite/
* gdb.dwarf2/dw2-icc-opaque.S: Add debug_info_seg3 and
.debug_abbrev_seg3.

gdb/
PR symtab/13277: Resolving opaque structures in ICC generated binaries.
* dwarf2read.c (struct dwarf2_cu) <producer_is_icc>: New field.
(producer_is_gxx_lt_4_6): Move the checking and caching to...
(check_producer): ... this new function, which also checks for ICC
and caches the result.
(producer_is_icc): New function.
(read_structure_type): Don't set TYPE_STUB_SUPPORTED if the
producer was ICC.

gdb/testsuite/
PR symtab/13277: Resolving opaque structures in ICC generated binaries.
* gdb.dwarf2/dw2-icc-opaque.S: New file.
* gdb.dwarf2/dw2-icc-opaque.exp: New file.

2012-05-24  Pedro Alves  <palves@redhat.com>

* sim-signal.h (sim_signal_to_target): Rename to ...
(sim_signal_to_gdb_signal): ... this.
* sim-signal.c (sim_signal_to_target): Rename to ...
(sim_signal_to_gdb_signal): ... this.
* sim-reason.c (sim_stop_reason): Adjust to rename.

2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

* arch-utils.c (default_gdb_signal_to_host): Rename to ...
(default_gdb_signal_to_target): ... this.  Add comment.
(default_gdb_signal_from_host): Rename to ...
(default_gdb_signal_from_target): ... this.  Add comment.
* arch-utils.h (default_gdb_signal_to_host): Rename to ...
(default_gdb_signal_to_target): ... this.
(default_gdb_signal_from_host): Rename to ...
(default_gdb_signal_from_target): ... this.
* corelow.c (core_open): Adjust to naming change.  Replace comment.
* gdbarch.sh (gdb_signal_from_host): Rename to ...
(gdb_signal_from_target): ... this.  Adjust to
default_gdb_signal_from_host naming change.  Extend comment.
(gdb_signal_to_host): Rename to ...
(gdb_signal_to_target): ... this.  Adjust to
default_gdb_signal_to_host naming change.
* gdbarch.h, gdbarch.c: Renegerate.

gdb/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

gdb/gdbserver/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

include/gdb/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        * gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_
throughout.

sim/arm/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

sim/avr/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

sim/common/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

sim/cr16/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

sim/d10v/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

sim/erc32/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

sim/m32c/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

sim/ppc/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

sim/rl78/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

sim/rx/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

        Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.

gdb/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

Replace target_signal with gdb_signal throughout.

gdb/gdbserver/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

Replace target_signal with gdb_signal throughout.

include/gdb/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

Replace target_signal with gdb_signal throughout.

sim/common/
2012-05-24  Pedro Alves  <palves@redhat.com>

PR gdb/7205

Replace target_signal with gdb_signal throughout.

2012-05-24  Pedro Alves  <palves@redhat.com>

PR tui/14159

* tui/tui-hooks.c (tui_query_hook): Pre-compute the question
string, instead of reusing the va_list argument.

* gas/lns/lns-big-delta.s: Add nops.
* gas/lns/lns-big-delta.d: Update.

* cp-support.h (cp_finalize_namespace, cp_initialize_namespace):
Remove.

PR ld/14158
* elf64-ppc.c (ppc64_elf_size_stubs): Round up glink_eh_frame
size to output section alignment.
(ppc64_elf_build_stubs): Likewise, and extend last FDE to cover.

* symtab.c (search_symbols): Formatting fixes.
(print_symbol_info): Formatting fixes.

* dwarf2-frame.c (execute_cfa_program): Update to handle long long ->
int64_t change to leb128 API.
(read_encoded_value, decode_frame_entry_1): Ditto.
* dwarf2expr.c (safe_read_uleb128, safe_read_sleb128): Ditto.
(dwarf_block_to_dwarf_reg, dwarf_block_to_dwarf_reg_deref): Ditto.
(dwarf_block_to_fb_offset, dwarf_block_to_sp_offset): Ditto.
(execute_stack_op): Ditto.
* dwarf2expr.h (gdb_read_uleb128, gdb_read_sleb128): Ditto.
(safe_read_uleb128, safe_read_sleb128): Ditto.
* dwarf2loc.c (decode_debug_loc_dwo_addresses): Ditto.
(dwarf2_compile_expr_to_ax): Ditto.
(locexpr_describe_location_piece): Ditto.
(disassemble_dwarf_expression): Ditto.
(locexpr_describe_location_1): Ditto.

* leb128.h: #include stdint.h, inttypes.h.
(read_uleb128_to_uint64): Renamed from read_uleb128_to_ull.
Change to take a uint64_t * argument instead of unsigned long long.
(read_sleb128_to_uint64): Renamed from read_sleb128_to_ll.
Change to take an int64_t * argument instead of long long.

ld/
* scripttempl/armbpabi.sc: Match .data.rel.ro.* sections more
carefully.  Fix typo where .rela.data.rel.ro matches
.rel.data.rel.ro.
* scripttempl/mep.sc: Likewise.
* scripttempl/elf.sc: Match .data.rel.ro.* sections more carefully.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.

gold/
* layout.cc (Layout::section_name_mapping): Add rules to handle
exact match on .data.rel.ro.local or .data.rel.ro.
(Layout::output_section_name): Check for exact matches.

2012-05-23  Stan Shebs  <stan@codesourcery.com>
    Kwok Cheung Yeung  <kcy@codesourcery.com>

* Makefile.in (SUBDIR_MI_OBS): Add mi-cmd-info.o.
(SUBDIR_MI_SRCS): Add mi-cmd-info.c.
(mi-cmd-info.o): New rule.
* osdata.h (info_osdata_command): New declaration.
* osdata.c (info_osdata_command): Change to non-static.
* mi/mi-cmds.h (mi_cmd_info_os): New declaration.
* mi/mi-cmds.c (mi_cmds): Add -info-os MI command.
* mi/mi-cmd-info.c: New file.

* gdb.texinfo (Miscellaneous GDB/MI Commands): Document -info-os.

* gdb.mi/mi-info-os.exp: New file.

* symtab.c (search_symbols): Pass NULL for file_matcher to
expand_symtabs_matching if there are no files to match.

*** empty log message ***

daily update

* gdbtypes.c (lookup_typename): Simplify.

gold/
* layout.cc (Layout::section_name_mapping): Match .data.rel.ro.*
more carefully.

* gdb.trace/stap-trace.exp: If compile_stap_bin fails,
return -1 to suppress the rest of the tests.
(compile_stap_bin): Return boolean success value.

2012-05-23  Pedro Alves  <palves@redhat.com>

* arch-utils.h (default_target_signal_to_host): Delete.
* arch-utils.c (default_target_signal_to_host): Delete.
* gdbarch.sh (target_signal_to_host): Remove.
* gdbarch.h, gdbarch.c: Regenerate.

* elf-eh-frame.c (_bfd_elf_maybe_strip_eh_frame_hdr): Handle
        BFDs with multiple .eh_frame sections.

PR ld/13909
* elflink.c (bfd_elf_discard_info): Don't ignore dynamic BFDs.

*** empty log message ***

gold/

* symtab.cc (Symbol::should_add_dynsym_entry): Check for relocatable
object before exporting symbol.

* linux-low.c (linux_store_registers): Avoid the copying sequence
when no data has been retrieved by ptrace.

Don't skip ld-elf/eh[1-4].d for x32

* ld-elf/eh1.d: Don't skip x86_64-*-linux-gnux32.
* ld-elf/eh2.d: Likewise.
* ld-elf/eh3.d: Likewise.
* ld-elf/eh4.d: Likewise.

Adjust ld-x86-64/ilp32-11.s for NACL

* ld-x86-64/ilp32-11.s Add ".space 0x1000" before func.
(func): Make it global and hidden.
* ld-x86-64/ilp32-11.d: Updated.

* dwarf2-frame.c (struct dwarf2_cie): Make initial_instructions, end
"const gdb_byte *".
(struct dwarf2_fde): Make instructions, end "const gdb_byte *".
(execute_cfa_program): Update to match API of leb128 functions.
(read_1_byte, read_4_bytes, read_8_bytes): Make buf parameter
"const gdb_byte *".
(read_unsigned_leb128, read_signed_leb128): Delete.
(read_initial_length): Change type of buf argument to
"const gdb_byte *".
(read_encoded_value): Update to match API of leb128 functions.
(decode_frame_entry): Change result to "const gdb_byte *", and
similarly for "start" parameter.
(decode_frame_entry_1): Ditto.  Use new leb128 reader functions.
(dwarf2_build_frame_info): Change local frame_ptr to
"const gdb_byte *".
* dwarf2expr.c (safe_read_uleb128, safe_read_sleb128): Replaces
read_uleb128, read_sleb128.  All callers updated.
(safe_skip_leb128): New function.
(dwarf_block_to_dwarf_reg): Update to match API of leb128 functions.
Call gdb_read_uleb128, gdb_skip_leb128 instead of read_uleb128.
(dwarf_block_to_dwarf_reg_deref): Update to match API of leb128
functions.  Call gdb_read_uleb128, gdb_read_sleb128 instead of
read_uleb128, read_sleb128.
(dwarf_block_to_fb_offset, dwarf_block_to_sp_offset): Ditto.
(execute_stack_op): Update to match API of leb128 functions.
* dwarf2expr.h: #include "leb128.h".
(read_uleb128, read_sleb128): Delete.
(gdb_read_uleb128, gdb_read_sleb128, gdb_skip_leb128): New functions.
(safe_read_uleb128, safe_read_sleb128, safe_skip_leb128): Declare.
* dwarf2loc.c (debug_loc_kind): New enum.
(decode_debug_loc_addresses): New function.
(decode_debug_loc_dwo_addresses): New function.
(dwarf2_find_location_expression): Rewrite.
(dwarf2_compile_expr_to_ax): Update to match API of leb128 functions.
(locexpr_describe_location_piece): Ditto.
(disassemble_dwarf_expression): Ditto.
(locexpr_describe_location_1): Ditto.
(loclist_describe_location): Rewrite.
* dwarf2loc.h (dwarf2_loclist_baton): New member "from_dwo".
* dwarf2read.c (die_reader_specs): New member "buffer_end".
(dwarf2_section_buffer_overflow_complaint): Renamed from
dwarf2_macros_too_long_complaint.  All callers updated.
(skip_leb128): Delete.
(init_cu_die_reader): Initialize reader->buffer_end.
(skip_one_die): Replace call to skip_leb128 with safe_skip_leb128.
(skip_form_bytes): New arg buffer_end.  All callers updated.
Replace call to skip_leb128 with gdb_skip_leb128.
(skip_unknown_opcode): New arg mac_end.  All callers updated.
(fill_in_loclist_baton): Initialize baton->from_dwo.

ld/testsuite/
* ld-elf/eh4.d: Revert last change.
Loosen CFI-matching regexps so they match x86_64-*-nacl* variant too.

ld/testsuite/
* ld-x86-64/pr12570a.d (name): Distinguish it from pr12570b.d case.
Loosen CFI-matching regexp so it matches x86_64-*-nacl* variant too.
* ld-x86-64/pr12570b.d: Likewise.
* ld-x86-64/x86-64.exp: Revert last change.

* mips-linux-nat.c (mips_linux_read_description): Use a more
verbose error message.

merge from gcc

* NEWS: Add MIPS/Linux DSP support.
* mips-linux-tdep.c: Document post-2.6.12 o32 sigcontext layout.
(SIGCONTEXT_DSPCTL): New macro.
(SIGCONTEXT_HI1, SIGCONTEXT_LO1): Likewise.
(SIGCONTEXT_HI2, SIGCONTEXT_LO2): Likewise.
(SIGCONTEXT_HI3, SIGCONTEXT_LO3): Likewise.
(N64_SIGCONTEXT_HI1, N64_SIGCONTEXT_HI2): Likewise.
(N64_SIGCONTEXT_HI3): Likewise.
(N64_SIGCONTEXT_LO1, N64_SIGCONTEXT_LO2): Likewise.
(N64_SIGCONTEXT_LO3): Likewise.
(N64_SIGCONTEXT_DSPCTL): Likewise.
(N64_SIGCONTEXT_FPCSR): Clarify definition.
(mips_linux_o32_sigframe_init): Handle DSP registers.
(mips_linux_n32n64_sigframe_init): Likewise.

Skip/xfail x86_64-*-nacl* for eh4/pr12570a tests

* ld-elf/eh4.d: Skip x86_64-*-nacl*.

* ld-x86-64/x86-64.exp: Xfail pr12570a for x86_64-*-nacl*.

* common/buffer.c (buffer_grow): ARI fix: Remove unneeded
call to abort.

Revert the change for PR ld/r13909

bfd/

PR ld/13909
* elf32-i386.c (elf_i386_create_dynamic_sections): Revert the
last change.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Likewise.

ld/testsuite/

2012-05-22  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/13909
* ld-i386/i386.exp: Revert the last change.
* ld-x86-64/x86-64.exp: Likewise.

* ld-i386/dummy.s: Removed.
* ld-i386/pr13909.d: Likewise.
* ld-x86-64/pr13909.d: Likewise.

2012-05-22  Pedro Alves  <palves@redhat.com>

* target.h (store_waitstatus): Move declaration ...
* inf-child.h (store_waitstatus): ... here.
* target.c: Move inclusion of gdb_wait.h, and ...
(store_waitstatus): ... this ...
* inf-child.c: ... here.
* linux-nat.c: Include inf-child.h.
* rs6000-nat.c: Include inf-child.h.
* spu-linux-nat.c: Include inf-child.h.

* elflink.c (bfd_elf_discard_info): Look for next .eh_frame if
first one is zero size or discarded.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Set most of
glink_eh_frame contents here..
(ppc_elf_finish_dynamic_sections): ..rather than here.  Just set
offset to .glink.

Create PLT eh_frame section if there is .eh_frame section

bfd/

PR ld/13909
* elf32-i386.c (elf_i386_create_dynamic_sections): Create PLT
eh_frame section if there is an input .eh_frame section.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Likewise.

ld/testsuite/

PR ld/13909
* ld-i386/i386.exp: Run pr13909.
* ld-x86-64/x86-64.exp: Likewise.

* ld-i386/dummy.s: New file.
* ld-i386/pr13909.d: Likewise.
* ld-x86-64/pr13909.d: Likewise.

Always create PLT eh_frame section for i386/x86-64

bfd/

2012-05-22  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/14105
* elf32-i386.c (elf_i386_create_dynamic_sections): Always
create PLT eh_frame section with SEC_LINKER_CREATED.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Likewise.

ld/testsuite/

2012-05-20  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/14105
* ld-elf/eh4.d: Add PLT eh_frame.

* ld-i386/i386.exp: Run pr12570a and pr12570b.
* ld-x86-64/x86-64.exp: Likewise.

* ld-i386/pr12570a.d: New file.
* ld-i386/pr12570a.s: Likewise.
* ld-i386/pr12570b.s: Likewise.
* ld-i386/pr12570b.s: Likewise.
* ld-x86-64/pr12570a.d: Likewise.
* ld-x86-64/pr12570a.s: Likewise.
* ld-x86-64/pr12570b.d: Likewise.
* ld-x86-64/pr12570b.s: Likewise.

2012-05-22  Will Deacon  <will.deacon@arm.com>

* linux-low (__UCLIBC__ && !(__UCLIBC_HAS_MMU__ || __ARCH_HAS_MMU__)):
Include asm/ptrace.h.
(PT_TEXT_ADDR, PT_DATA_ADDR, PT_TEXT_END_ADDR): Define only if not
already defined.

* elflink.c (bfd_elf_discard_info): Handle multiple .eh_frame
sections attached to a BFD.
* section.c (bfd_get_section_by_name): Rewrite description.
(bfd_get_next_section_by_name): New function.
* bfd-in2.h: Regenerate.

* tracepoint.c (start_tracing): Add missing i18n markup.
(stop_tracing, set_trace_user): Ditto.
(set_trace_notes, set_trace_stop_notes): Ditto.

gas: mips: fix segfault with invalid default cpu strings

If you configure gas for a mips32el-* target, the default cpu calculation
gets mangled, and we end up passing and invalid value as the default cpu.

If you try executing gas after that, it segfaults.  This is because it
assumes that the default cpu value is always valid.
$ ./gas/as-new
Assembler messages:
Error: Bad value (2) for default CPU
Segmentation fault (core dumped)

I'm not debating that the target tuple is valid, just that gas shouldn't
crash.  So add a friendly assert to avoid that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

daily update

*** empty log message ***

* linux-low.c (linux_store_registers): Don't re-retrieve data
with ptrace that has already been obtained from /proc.  Always
copy any data retrieved with ptrace to the buffer supplied.

PR c++/7173:
* gnu-v3-abi.c (gnuv3_baseclass_offset): Return early for Java
types.
* value.h (value_cast_pointers): Update.
* valops.c (value_cast_pointers): Add 'subclass_check' argument.
(value_cast): Update.
(update_search_result): New function.
(do_search_struct_field): New, from search_struct_field.  Check
for ambiguous results.
(search_struct_field): Rewrite.
* infcall.c (value_arg_coerce): Update.
* eval.c (evaluate_subexp_standard) <STRUCTOP_MEMBER>: Use
value_cast_pointers.
* ada-lang.c (ada_convert_actual): Update.
testsuite
* gdb.cp/inherit.exp (test_print_mi_members): Expect errors.
Remove kfails.
(test_print_mi_member_types): Likewise.

* gdb.base/callfuncs.exp (do_function_calls): Update for 'set
print symbol' change.

Include "config.h" first

* testsuite/tls_test.cc: Include "config.h" first.
* testsuite/tls_test_c.c: Likewise.

* macroexp.c (macro_stringify): Terminate the string.

* elf32-m68k.c (elf_m68k_grok_prstatus): New function.
(elf_m68k_grok_psinfo): New function.
(elf_backend_grok_prstatus): Define.
(elf_backend_grok_psinfo): Define.

daily update

*** empty log message ***

gdb/
* NEWS (--with-auto-load-dir): Prepend $debugdir to the default path.
Describe it.
* auto-load.c (auto_load_expand_dir_vars): New function.
(auto_load_safe_path_vec_update): Use it, remove the
substitute_path_component call thanks to it.
(auto_load_objfile_script): Remove the debug_file_directory processing.
Use auto_load_expand_dir_vars, remove the substitute_path_component
call thanks to it.
* configure: Regenerate.
* configure.ac (--with-auto-load-dir): Prepend $debugdir to the default
path.  Escape $ also for $debugdir.
(--with_auto_load_safe_path): Escape $ also for $debugdir.
* utils.c (substitute_path_component): Accept also DIRNAME_SEPARATOR.

gdb/doc/
* gdb.texinfo (Separate Debug Files): New anchor debug-file-directory.
Mention also --with-separate-debug-dir.
(Auto-loading): Prepend $debugdir in the sample output.
(Auto-loading safe path): Likewise.  Mention also $debugdir for the
auto-load safe-path variable.
(objfile-gdb.py file): Remove the extra debug-file-directory paragraph.
Mention also $debugdir for 'set auto-load scripts-directory'.