package/python-pillow: bump to pillow 3.4.2

This patch bumps python pillow to version 3.4.2

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

htop: enable unicode if possible

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas:
 - use positive logic
 - use += instead of = in conditions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/netsniff-ng: allow to build with musl

netsniff-ng allows build with musl since version 0.5.8. With libnet
now being able to build with musl, let's enable musl for netsniff-ng
as well.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
[Thomas: update Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libnet: enable on musl configurations

Thanks to a patch taken from upstream
(https://github.com/sam-github/libnet/commit/ffd7fab744a9ad2893169a8fb6244074604d5d0d),
we can enable the libnet package on musl toolchain.

Adjusted the file paths manually so the patch applies to the packaged
libnet sources.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
[Thomas: allow the package to be selected with the musl C library.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: bump version to 6.9.1

https://nodejs.org/en/blog/release/v6.9.1/

The patches from 6.7.0 have been copied to 6.9.1.

Signed-off-by: Patrick Devlin <cloudyparts@icloud.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/warp7: Bump to U-Boot 2016.11

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: bump to version 2016.11

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/uboot: bump to version 2016.11

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lcms2: bump version to 2.8

For ChangeLog see [1].

[1] https://github.com/mm2/Little-CMS/blob/master/ChangeLog

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

domoticz: bump to version 3.5877

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva-intel-driver: bump version to 1.7.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva: bump version to 1.7.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: bump version to 7.0.13

Release notes: http://php.net/ChangeLog-7.php#7.0.13

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

netsniff-ng: bump to version 0.6.2

We recently released netsniff-ng 0.6.2 [1], bumpd the version accordingly.

[1] https://github.com/netsniff-ng/netsniff-ng/releases/tag/v0.6.2

Cc: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/olimex_imx233_olinuxino: restore Wifi config

Add a fragment with configs from retired linux-3.18.config.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/olimex_imx233_olinuxino: remove useless section from readme.txt

After the conversion to the common genimage scripts, the uImage.imx23-olinuxino
file no longer exists.

Instead of updating the section, let's simply remove it as the more
standard method of using sdcard.img is already explained.

This also makes the readme more consistent with the other i.MX readme files.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/olimex_imx233_olinuxino: readme: Improve SD card flashing procedure

Make the SD card flashing procedure text consistent with the other i.MX
boards.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/olimex_imx233_olinuxino: readme: Adjust the generated file names

After the conversion to the common genimage scripts the generated file list
is a bit different, so adjust it accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/olimex_imx233_olinuxino: Add EXT4 support

Select BR2_TARGET_ROOTFS_EXT4 so that an EXT4 rootfs can be generated.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

config: bump linux kernel to 4.8.6 in synopsys defconfigs

With this commit we update ARC defconfigs with the following:

  - "snps_axs101_defconfig", "snps_axs103_defconfig" and
    "snps_hs38_smp_vdk_defconfig":
     - bump linux kernel version to 4.8.6
     - set up host linux headers to 4.8

Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sunxi-tools: fix license file

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sunxi-tools: bump to version 1.4.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

patchelf: use .tar.bz2 archive

Saves a little space and network bandwidth.

While at it, use PATCHELF_VERSION for PATCHELF_SITE.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

snowball-{hdmiservice, init}: remove packages

The snowball_defconfig has been removed one year ago in commit
b3fa8e24defb20e1734e7e75f432090fe83c0dd8 ("configs: remove
calao_snowball_defconfig"), and it's no longer possible to buy
Snowball boards. Therefore, there is no reason to keep the
snowball-related packages in our tree.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Use already qstripped BR2_TOOLCHAIN_EXTERNAL_PREFIX everywhere

The BR2_TOOLCHAIN_EXTERNAL_PREFIX variable is already qstripped and
stored in the TOOLCHAIN_EXTERNAL_PREFIX variable in
toolchain-external.mk, so use this variable everywhere.

This will be useful for a later patch that makes the derivation of
TOOLCHAIN_EXTERNAL_PREFIX a little more complex.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kodi: allow enablement of libamcodec as codec if selected

allow usage of amcodec if kodi is built and libamcodec is selected

Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas: fix KODI_INCLUDES definition in RPi case, fix indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

swupdate: bump to version 2016.10

A short list of new features:

- progress interface as general way to signalize the update
  status outside of the process.

- support encrypted artifacts (encryption via simmetric keys)

- host verification for swu images (-c option)

- configuration file to configure the update process

- HAwkbit backend: API extended, support for configData messages

- Hawkbit backend: supports SSL certificates

- remote handler : general interface to connect external
  installers.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk3: bump version to 3.22.3

Overview of Changes in GTK+ 3.22.3:
http://ftp.gnome.org/pub/gnome/sources/gtk+/3.22/gtk+-3.22.3.news

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

screen: enable support for 256 colors

Support for 256 colors is enabled in xterm and ncurses, but it was
forgotten for screen.

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

patchelf: bump version to 0.9

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

olimex_imx233_olinuxino: use the common mxs genimage script

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

olimex_imx233_olinuxino: bump version

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freescale: Create the board/freescale/common/imx/ directory

In order to have a better hierarchy for the genimage scripts used by
NXP mx25, mx51, mx53, mx6, mx7 SoCs, let's place them inside the
board/freescale/common/imx/ directory.

This helps in creating a more natural separation between the mxs scripts
that are placed inside the board/freescale/common/mxs/ directory.

Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx23evk: Add support for imx23evk

Add support for imx23evk board.

For more information about this board, please check:
http://www.nxp.com/products/software-and-tools/software-development-tools/i.mx-software-and-tools/i.mx23-evaluation-kit:IMX23EVK

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

busybox: allow the user to set the telnetd options

Source /etc/default/telnet to make it possible to override the telnetd
arguments. For example a user may want to set an alternative port.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpa_supplicant: add mesh support (IEEE 80211s)

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lvm2: bump version to 2.02.167

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sqlite: bump version to 3150100 (3.15.1)

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: add srtp support

It's not new for 1.10.0 but hasn't been enabled when libsrtp was added
to buildroot.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst-omx: bump to version 1.10.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-validate: bump to version 1.10.0

It now requires json-glib as dependency so adjust.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-rtsp-server: bump to version 1.10.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: bump to version 1.10.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-ugly: bump to version 1.10.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: add new timecode plugin

Add a new explicit option for the dependency-less timecode plugin.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: enable webrtc plugin

It's new for 1.10.0, add an explicit option for the webrtc plugin.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

webrtc-audio-processing: refactor architecture dependency as a blind option

In preparation to the addition of a webrtc GStreamer plugin that will
have to select the webrtc-audio-processing package (and therefore
inherits its dependencies), this commits adds a
BR2_PACKAGE_WEBRTC_AUDIO_PROCESSING_ARCH_SUPPORTS blind option to avoid
duplicating the architecture dependencies of this package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: enable fdkaac plugin

It's new for 1.10.0, add an explicit option for the fdkaac plugin.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add missing dependencies for the fdk-aac select, as noticed
by Baruch Siach.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fdk-aac: refactor architecture dependency as a blind option

In preparation to the addition of a fdk-aac GStreamer plugin that will
have to select the fdk-aac package (and therefore inherits its
dependencies), this commits adds a BR2_PACKAGE_FDK_AAC_ARCH_SUPPORTS
blind option to avoid duplicating the architecture dependencies of
this package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: bump to version 1.10.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-good: bump to version 1.10.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-base: bump to version 1.10.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer1: add explicit libunwind support

It's a new feature for 1.10.0+, however it doesn't have an
enable/disable configure switch so just handle the dependency.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer1: bump to version 1.10.0

Remove gstconfig.h compatibility kludge since it has been
fixed/reinstated upstream.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx28evk: Use the common mxs genimage script

Use the common mxs genimage script instead of a custom one.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freescale: Add a standard genimage script for MX23/MX28

Add a standard genimage script for the MXS processors (MX23 and MX28).

Based on the common scripts for the other imx devices:
board/freescale/common/genimage.cfg.template
board/freescale/common/post-image.sh

This makes it easier to add new MX23/MX28 boards configurations into
Buildroot.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libpjsip: bump to 2.5.5

Remove patches now upstream.
Disable new optional features: webrtc and opus.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: delete default rules

We don't use the default implicit rules that are added by make, so
they just slow down the Makefile processing. The default implicit
rules can be removed by defining an empty .SUFFIXES: target.

This speeds up the start of the build on my machine from 5.6s to
4.9s.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sudo: bump version to 1.8.18p1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sudo: add optional support for zlib

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add entry for uhttpd and ustream-ssl

Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uhttpd: new package

Signed-off-by: Rahul Bedarkar <Rahul.Bedarkar@imgtec.com>
Signed-off-by: Neha Bairathi <Neha.Bairathi@imgtec.com>
Signed-off-by: Abhishek Singh <Abhishek.Singh@imgtec.com>
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
[Thomas: remove luajit support, as it doesn't build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ustream-ssl: new package

ustream-ssl has support for polarssl and cyassl
but since polarssl is made obsolete by mbedtls and cyassl
is not present in buildroot, we have not added support for it.

Signed-off-by: Rahul Bedarkar <Rahul.Bedarkar@imgtec.com>
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tinycbor: bump to version v0.4

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: bump version to 232

- 0002 patch tweaked. There is a hunk that has been removed upstream by
  this commit:
  https://github.com/systemd/systemd/commit/082210c7a837063fd8b520b18c221b42059d7eff
- Patches 0004, 0005 and 0006 were backported from upstream and now they
  are included in this release, so drop them.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cmake: bump version to 3.6.3

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openvpn: bump to version 2.3.13

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/website: update news with 2016.11-rc1 release e-mail link

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Update for 2016.11-rc1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: mention fakeroot as a removed package

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/fakeroot: remove

We've now entirely switched to using pseudo istead of fakeroot, so it is
time to remove the fakeroot package now.

Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pseudo: add a legacy symlink to emulate fakeroot

In case some post-image script want to call fakeroot, add a symlink to
use pseudo instead.

Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs/iso9660: drop reference to host-fakeroot

Since commit 41f0688d9113dd33a5971c5654c7efd022727ed2 ("fs/iso9660:
convert to the filesystem infrastructure"), the is9660 logic uses the
common filesystem infrastructure, so the dependency on host-fakeroot is
no longer needed, and has actually become bogus since we switched to
host-pseudo.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pseudo: needs sqlite

pseudo uses sqlite to store its state.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add comment about --libdir.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: final update

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: extend 2016.11-rc1 changelog

- Longer explanation of multi-BR2_EXTERNAL
- Mention nobody UID 99 -> 65534 change
- Mention removal of BR2_DEPRECATED
- Mention use of system cmake
- Mention new dependency on ExtUtils::MakeMaker. The other perl
  dependencies are not mentioned since they only apply if mpv is built.
- Mention the $(STAGING_DIR)/$(O) check.
- Mention unsafe path detection in -isystem etc.
- Mention linux-tools split.
- Mention changes in legal-info.
- Mention that pseudo is used instead of fakeroot.
- Correct the info of toolchainfile.cmake: it still sets cflags but it
  doesn't force them anymore (doesn't append).

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: drop cubieboard_defconfig

This defconfig is affected by bug #8516, reported more than a year ago,
and nobody has updated the defconfig since then. In addition, it should
be migrated to the genimage mechanism instead of having its own
mkcubieboard.sh script.

Therefore, let's get rid of this defconfig.

Fixes bug #8516.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bridge-utils: fix build with musl

Apply a patch that removes direct include of kernel headers to avoid conflict
of definitions.

Fixes:
http://autobuild.buildroot.net/results/4aa/4aaeca4f1fca1794b039d7255a1828ff724f2234/
http://autobuild.buildroot.net/results/b48/b48a70137a4a568b31337f899fd21d05552db5e2/
http://autobuild.buildroot.net/results/bff/bff5767fc7e821a7674ee022111db84e4a9449d0/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: atmel: at91sam9x5ek: bump to linux4sam_5.5

Bump at91bootstrap to v3.8.7, U-Boot to linux4sam_5.5, Linux to
linux4sam_5.5 (based on v4.4.x).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: atmel: xplained boards: bump to linux4sam_5.5

Bump at91bootstrap to v3.8.7, U-Boot to linux4sam_5.5, Linux to linux4sam_5.5
(based on v4.4.x).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

domoticz: bump to version 3.5837

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

alsa-lib: fix build on powerpc64 and powerpc64le

Fixes linker error
http://autobuild.buildroot.net/results/c6272ac900d1a53b976839ac4f50a210b3e6b354

On powerpc64 (and powerpc64le) the build fails due to linker problems
because of an old (2003) workaround for powerpc64, presumably working
around an old toolchain problem that is no longer present. Removing
the workaround allows the build to succeed. A new patch is added for
this.

Additionally, there was a mistake in patch 3: the patch added a test
for HAVE_LIBDL to include/alsa-symbols.h but it was positioned in the
file before config.h was included, so HAVE_LIBDL is never seen as
defined.  The test was also using HAVE_LIBDL (which indicates the
library) rather than HAVE_DLFCN (which indicates the header).

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: transfer lttng-* and liburcu projects to Philippe Proulx

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcurl: move site to https

Saves a redirect.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

net-tools: add a patch to avoid struct redefinition

This fixes a struct redefinition problem like this one:

================================
In file included from /usr/include/linux/if_tunnel.h:6:0,
from iptunnel.c:34:
/usr/include/linux/ip.h:85:8: error: redefinition of 'struct iphdr'
struct iphdr {
^
In file included from iptunnel.c:29:0:
/usr/include/netinet/ip.h:45:8: note: originally defined here
struct iphdr
^
================================

iptunnel.c includes netinet/ip.h which contains a definition of the
iphdr struct.

iptunnel.c also includes linux/if_tunnel.h which includes linux/ip.h
which contains a definition of the iphdr struct.

So, both netinet/ip.h and linux/ip.h define the iphdr struct, and both
of them have been included directly or indirectly by iptunnel.c. Because
of that the compilation fails due to a struct redefinition.

The problem can be solved by just not including netinet/ip.h.

The patch has been sent upstream as a merge request:
  https://sourceforge.net/p/net-tools/code/merge-requests/3/

Fixes:
  http://autobuild.buildroot.net/results/dce/dce499da84b2a41bab946d5109a283ccb85c8b81/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

owfs: install python bindings in the correct location

The owfs build system has a pretty complicated way of configuring the
Python bindings. It ends up with setting PYSITEDIR to the host-python
site-packages path, and it still prepends DESTDIR to that.

As a simple fix, override PYSITEDIR with the correct value on the make
command line.

Fixes:
http://autobuild.buildroot.net/results/200/200846650641494290aa67d28ea6fb2c9351d4dc
http://autobuild.buildroot.net/results/99c/99c00248dd8b00071bcdbc73336cc276c68a4c16
and many more

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: Add an entry for mx6udoo_defconfig

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: Remove udoo_quad_defconfig

configs/mx6udoo_defconfig supports the quad and dual-lite variants,
so there is no need to keep udoo_quad_defconfig anymore.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core: remove redundant "override O := $(O)"

The top-level Makefile contains an "override O := $(O)" statement that
is purportedly required to make sure the O flag doesn't leak into the
environment of sub-makes. However, since commit 173135d, there is
already an "override O := ..." a few lines down. Therefore, the first
override is redundant.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core: don't reset MAKEOVERRIDES when re-entering make

We reset MAKEOVERRIDES to avoid passing down variables that are
overridden on the command line to the package build systems. Indeed,
the variables overridden on the command line will be Buildroot
variables and not relevant to the package build system. In particular
the O option is used by some packages and the value passed in on the
command line is plain wrong for the individual package.

However, in commit 916e614b, MAKEOVERRIDES was moved earlier and it
was reset _before_ re-entering make in the cases when something has
to be fixed up (incorrect umask, non-absolute paths in O or CURDIR).
Therefore, if make is re-entered, any command line overrides are lost.

This particularly bites the autobuilders, because they use
O=<relative path> to specify the output directory, and they add
BR2_JLEVEL=... to avoid starting too many jobs in parallel. The
BR2_JLEVEL override is lost.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: remove invalid email address

Merge the two entries of Richard Braun under the correct address.

Cc: Richard Braun <rbraun@sceen.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: additional updates for 2016.11-rc1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boards: add FriendlyARM Nanopi NEO

The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
  - quad-core Cortex-A7 @1.2GHz
  - 256 or 512MiB of DDR
  - uSDCard as only storage option
  - 3x USB 2.0 host (one socket, two on expansion pin-holes)
  - 1x USB 2.0 OTG (also used as power source)
  - 10/100 etehrnet MAC
  - GPIOs, SPI, I2c...

Support for the Nanopi NEO in U-Boot and Linux is very recent, so much
so that we have to use an -rc tag for U-Boot and a special Linux tree.

As for Linux, I pushed a git tree on Github with a single tag that
matches what is currently queued in the sunxi-next queued for 4.10,
based on 4.9-rc3. All those commits are from Maxime's tree, the
maintainer for most sunxi stuff.

This also means that we can't use the Linux headers from the kernel
being built (which is what we usually do) because those report 4.9,
while Buildroot currently knows only of 4.8 at best. So this is what we
use.

Unfortunately, support for the ethernet MAC and the USB OTG are not yet
upstream, but are being actively worked on.

The Nanopi NEO is very similar to the Orangepi PC, so I was able to
scanvenge most of its configuration. ;-)

Thanks Maxime for your help on IRC! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs: use pseudo instead of fakeroot

fakeroot misbhaves when there are SElinux contexts, as reported in #9386,
and further detailed in https://bugzilla.redhat.com/show_bug.cgi?id=1238802

A proposal in the FC bug is to use pseudo instead of fakeroot. Pseudo is
a from-scratch re-implementation of fakeroot; it is used in Poky/OE
instead of fakeroot.

Fixes #9386.

Reported-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Andrey Yurovsky <yurovsky@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pseudo: new package

Pseudo is a program that can either be used directly or as an
LD_PRELOAD, which allows these operations to succeed as if the
user did have system administrator privileges even though they
are an ordinary user.

Pseudo has a lot of similarities to fakeroot but is a new
implementation that improves on the problems seen using fakeroot.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Andrey Yurovsky <yurovsky@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: prepare for 2016.11-rc1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add David Lechner

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tinyalsa: bump version to 1.0.2

tinyalsa has started doing release, so we will use it.

With this release, both our patches were applied mainline:
    - 0001-tinypcminfo-make-function-pcm_get_format_name-static.patch [1]
    - 0002-asound.h-include-time.h-to-get-struct-timespec-proto.patch [2]

The Makefile has changed a lot, so we take advantage of that to simplify
our package.

1. https://github.com/tinyalsa/tinyalsa/commit/7d204edfe87f4e22105bcaeb750d69ac769afdd6
2. https://github.com/tinyalsa/tinyalsa/commit/c8333f8c7a4e4b9549abeef7530b2cd20a18e537

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas: add patch to remove doxygen usage.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lttng-babeltrace: add debug info support

Since Babeltrace 1.4, there is support for printing debug information
along with compatible traces and event records. Babeltrace needs
elfutils in this case.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
[Thomas:
 - add better description for
   0002-m4-ax_lib_elfutils.m4-add-cache-variable.patch
 - use automatic dependency on elfutils rather than a very complicated
   Config.in symbol]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lttng-babeltrace: add host Babeltrace as host utility

Although Babeltrace is available for all major Linux distributions, some
of them have a quite old version of this project.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>