Remove "keep" parameter from cutu_reader constructor

cutu_reader has a "keep" parameter, which is used to decide what to do
with a new CU when the reader is destroyed.  Most code does not try to
preserve the CU, so this patch removes this parameter and instead adds
a new method that users can call to preserve the CU on the chain.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (class cutu_reader) <cutu_reader,
init_tu_and_read_dwo_dies>: Remove "keep" parameter.
<keep>: Declare method.
<m_keep>: Remove member.
<~cutu_reader>: Remove.
(cutu_reader::init_tu_and_read_dwo_dies): Update.
(cutu_reader::cutu_reader): Update.
(cutu_reader::keep): Rename from ~cutu_reader.
(process_psymtab_comp_unit, build_type_psymtabs_1)
(process_skeletonless_type_unit, load_partial_comp_unit)
(load_full_comp_unit, dwarf2_read_addr_index)
(read_signatured_type): Update.

Change-Id: I859b1c64313569d76d46317c14e9b077ebc3a27b

Simplify "want_partial_unit" handling

This changes the "want_partial_unit" parameters to have type bool, and
also removes the parameter from process_psymtab_comp_unit_reader.
This latter change seemed like an improvement, because it avoids a
pointless function call in the case where we are not planning to read
a partial unit.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (process_psymtab_comp_unit_reader): Remove
"want_partial_unit" parameter.
(process_psymtab_comp_unit): Change want_partial_unit to bool.
Inline check for DW_TAG_partial_unit.
(dwarf2_build_psymtabs_hard, scan_partial_symbols): Update.

Change-Id: I99e647f0c4faa3346e90a6e7bacc82af57eccff1

Move two more functions to dwarf2/leb.h

This moves read_n_bytes and read_direct_string to be with the the
low-level value-reading code.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_n_bytes, read_direct_string): Move to
read.c.
* dwarf2/leb.h (read_n_bytes, read_direct_string): Move from
read.c.

Change-Id: Id07bfa13d93c0ac1f47a385749a8f01f4755b818

Convert read_address to a method on comp_unit_head

This changes read_address to be a method on comp_unit_head.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_address): Move to comp-unit.c.
(dwarf2_rnglists_process, dwarf2_ranges_process)
(read_attribute_value, dwarf_decode_lines_1)
(var_decode_location, decode_locdesc): Update.
* dwarf2/comp-unit.c (comp_unit_head::read_address): Move from
read.c.  Remove "cu" parameter.
* dwarf2/comp-unit.h (struct comp_unit_head) <read_address>: New
method.

Change-Id: Ibd6c7235f2e4d5fd88c272cfd2c3d3328618cc56

Convert read_offset to method on comp_unit_head

This changes one of the read_offset overloads to be a method on
comp_unit_head.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_attribute_value, read_indirect_string)
(read_indirect_line_string): Update.
* dwarf2/comp-unit.c (read_offset): Remove.
(read_comp_unit_head): Update.
* dwarf2/comp-unit.h (struct comp_unit_head) <read_offset>: New
method.
(read_offset): Don't declare.

Change-Id: Ia595702a5748337b7c031352bc437956baab9990

Create dwarf2/comp-unit.[ch]

This creates the new files dwarf2/comp-unit.[ch], moving
comp_unit_head and helpers to those files.  A couple of functions are
turned into methods, because it was convenient to do so now.

2020-02-08  Tom Tromey  <tom@tromey.com>

* Makefile.in (COMMON_SFILES): Add dwarf2/comp-unit.c.
* dwarf2/read.c (struct comp_unit_head): Move to
dwarf2/comp-unit.h.
(enum class rcuh_kind): Move to comp-unit.h.
(get_cu_length, offset_in_cu_p): Now methods on comp_unit_head.
(read_comp_unit_head, error_check_comp_unit_head)
(read_and_check_comp_unit_head): Move to comp-unit.c.
(read_offset, dwarf_unit_type_name): Likewise.
(create_debug_type_hash_table, read_cutu_die_from_dwo)
(cutu_reader::cutu_reader, read_call_site_scope)
(find_partial_die, follow_die_offset): Update.
* dwarf2/comp-unit.h: New file, from dwarf2read.c.

Change-Id: Id961b9674c0081ed061083c8152c38b27b27388a

Move read_offset_1 to leb.c

This moves read_offset_1 to leb.c, as it is a low-level data-reading
function.  It is also renamed to remove the "_1", because gdb can use
overloading now, and this is clearer.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_offset_1): Move to leb.c.
(read_abbrev_offset, read_offset, dwarf_decode_line_header)
(dwarf_decode_macro_bytes): Update.
* dwarf2/leb.c (read_offset): Rename; move from read.c.
* dwarf2/leb.h (read_offset): Declare.

Change-Id: I048140598acfa76eade2cc529ab7933d4b9ca0b3

Convert dwarf2_section_size to a method

This changes dwarf2_section_size to be a method on
dwarf2_section_info.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (dwarf2_section_size): Remove.
(error_check_comp_unit_head, dwarf2_symbol_mark_computed):
Update.
* dwarf2/section.h (struct dwarf2_section_info) <get_size>: New method.

Change-Id: I12928fee5c84350ce98883e329357b86888d639b

Unify read_initial_length implementations

There are two implementations of read_initial_length in gdb.  This
merges them and moves the resulting function to leb.c.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_initial_length): Move to leb.c.
* dwarf2/leb.h (read_initial_length): Declare.
* dwarf2/leb.c (read_initial_length): Move from read.c.  Add
handle_nonstd parameter.
* dwarf2/frame.c (read_initial_length): Remove.
(decode_frame_entry_1): Update.

Change-Id: I34d37bad0f8a584bfa781432cba25e05e1bd5750

Add some methods to dwarf2_per_cu_data

This changes a few helper functions to be methods on
dwarf2_per_cu_data.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/loc.c (dwarf2_find_location_expression)
(dwarf_evaluate_loc_desc::get_tls_address)
(dwarf_evaluate_loc_desc::push_dwarf_reg_entry_value)
(rw_pieced_value, dwarf2_evaluate_loc_desc_full)
(dwarf2_locexpr_baton_eval, dwarf2_evaluate_property)
(dwarf2_compile_property_to_c)
(dwarf2_loc_desc_get_symbol_read_needs)
(dwarf2_compile_expr_to_ax, locexpr_describe_location)
(locexpr_tracepoint_var_ref, locexpr_generate_c_location)
(loclist_describe_location, loclist_tracepoint_var_ref)
(loclist_generate_c_location): Update.
* compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update.
* dwarf2/loc.h (dwarf2_per_cu_objfile, dwarf2_per_cu_addr_size)
(dwarf2_per_cu_ref_addr_size, dwarf2_per_cu_offset_size)
(dwarf2_per_cu_text_offset, dwarf2_version): Don't declare.
* dwarf2/read.c (dwarf2_per_cu_data::objfile)
(dwarf2_per_cu_data::addr_size)
(dwarf2_per_cu_data::ref_addr_size)
(dwarf2_per_cu_data::text_offset)
(dwarf2_per_cu_data::addr_type): Now methods.
(per_cu_header_read_in): Make per_cu "const".
(dwarf2_version): Remove.
(dwarf2_per_cu_data::int_type): Now a method.
(dwarf2_per_cu_data::_addr_sized_int_type): Likewise.
(set_die_type, read_array_type, read_subrange_index_type)
(read_tag_string_type, read_subrange_type): Update.
* dwarf2/read.h (struct dwarf2_per_cu_data) <addr_size,
offset_size, ref_addr_size, text_offset, addr_type, version,
objfile, int_type, addr_sized_int_type>: Declare methods.

Change-Id: I07a42fa26e00795352389fa7a0cc1c12997d26f7

Move dwarf2_per_cu_data::imported_symtabs earlier

This moves dwarf2_per_cu_data::imported_symtabs earlier, near where
the other data members are located.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.h (struct dwarf2_per_cu_data) <imported_symtabs>:
Move earlier.

Change-Id: I314ddaa6f67c53a848e513b3f6d42913bd957833

Move DWARF line_header to new file

This moves the line_header class to a pair of new files, making
dwarf2/read.c somewhat smaller.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.h (dwarf_line_debug): Declare.
* Makefile.in (COMMON_SFILES): Add dwarf2/line-header.c.
* dwarf2/read.c: Move line_header code to new files.
(dwarf_line_debug): No longer static.
* dwarf2/line-header.c: New file.
* dwarf2/line-header.h: New file.

Change-Id: I8d9d8a2398b4e888e20cc5dd68d041c28b5a06e3

Change line_table methods to return unique_xmalloc_ptr

This changes the two new line_table methods to return
unique_xmalloc_ptr.  This removes a bit of manual memory management.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (struct line_header) <file_full_name,
file_file_name>: Return unique_xmalloc_ptr.
(line_header::file_file_name): Update.
(line_header::file_full_name): Update.
(dw2_get_file_names_reader): Update.
(macro_start_file): Update.

Change-Id: I9442dba43882fb26097d0770a291eea2b03913a4

Change file_full_name and file_file_name methods

This changes file_full_name and file_file_name methods to be methods
on line_header.  This seems more clear to me.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (struct line_header) <file_full_name,
file_file_name>: Declare methods.
(dw2_get_file_names_reader): Update.
(file_file_name): Now a method.
(file_full_name): Likewise.
(macro_start_file): Update.

Change-Id: I50d3e91665a9637c732e1e8d8e4263764c766d9c

Move dwarf_always_disassemble to dwarf2/loc.c

dwarf_always_disassemble is only used in dwarf2/loc.c, so move the
definition and the command infrastructure to that file.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (dwarf_always_disassemble)
(show_dwarf_always_disassemble): Move to loc.c.
(_initialize_dwarf2_read): Move "always-disassemble" registration
to loc.c.
* dwarf2/read.h (dwarf_always_disassemble): Don't declare.
* dwarf2/loc.c (dwarf_always_disassemble): Move from read.c.  Now
static.
(show_dwarf_always_disassemble): Move from read.c.
(_initialize_dwarf2loc): Move always-disassemble from read.c.

Change-Id: I33fb88112e98e583c3f4919d20e4d100f2ea0124

Change dwarf2_per_objfile::quick_file_names_table to htab_up

This changes dwarf2_per_objfile::quick_file_names_table to be an
htab_up.  This just removes a bit of manual management.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (~dwarf2_per_objfile): Update.
(create_quick_file_names_table): Return htab_up.
(dw2_get_file_names_reader, dw2_forget_cached_source_info):
Update.
* dwarf2/read.h (struct dwarf2_per_objfile)
<quick_file_names_table>: Now htab_up.

Change-Id: I4ff2fce8b8af27f4bfe01a11b97a889edfd23151

Minor simplification in abbrev_table::read

abbrev_table::read increments cur_abbrev->num_attrs in the inner loop,
but there's no need to do this, as the information is already stored
in the temporary vector.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/abbrev.c (abbrev_table::read): Simplify.

Change-Id: I765f12850ffa1c6066e884bb22c94468d1abdba4

Use htab_up in abbrev_table

This changes abbrev_table to use an htab_up rather than an ad hoc,
bucket-based hash table.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/abbrev.c (abbrev_table): Move constructor from header.
Rewrite.
(abbrev_table::add_abbrev, abbrev_table::lookup_abbrev): Rewrite.
* dwarf2/abbrev.h (struct abbrev_info) <next>: Remove.
(abbrev_table::abbrev_table): No longer inline.
(ABBREV_HASH_SIZE): Remove.
(abbrev_table::m_abbrevs): Now an htab_up.

Change-Id: Icbaa8e49501f9c43218d6a81a7e8c4d3a77d65dc

Minor cleanups in abbrev_table

This cleans up the DWARF abbrev_table API a bit, primarily by making
various methods and members private.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_cutu_die_from_dwo): Update.
(cutu_reader): Update.
(build_type_psymtabs_1): Update.
* dwarf2/abbrev.c (abbrev_table::read): Rename.
(abbrev_table::alloc_abbrev): Update.
* dwarf2/abbrev.h (abbrev_table_up): Move earlier.
(abbrev_table::read): New static method, renamed from
abbrev_table_read_table.
(abbrev_table::alloc_abbrev)
(abbrev_table::add_abbrev): Now private.
(abbrev_table::abbrev_table): Now private.
(abbrev_table::m_abbrev_obstack): Now private.  Rename.

Change-Id: I320dca83b799f672909ae66f73b7aca266adbaf9

Change dwarf2_per_objfile::die_type_hash to htab_up

This changes dwarf2_per_objfile::die_type_hash to be an htab_up,
moving its contents off the objfile obstack.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (set_die_type, get_die_type_at_offset): Update.
* dwarf2/read.h (struct dwarf2_per_objfile) <die_type_hash>: Now
htab_up.

Change-Id: Ic651f99ebf71bf7ad2dc2880192adacf7b60964a

Change dwp_file to use htab_up

This changes dwp_file to use htab_up for the loaded_cus and loaded_tus
members.  This lets us avoid allocating the contents of these hash
tables on the objfile obstack.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (struct dwp_file) <loaded_cus, loaded_tus>: Now
htab_up.
(lookup_dwo_unit_in_dwp): Update.
(allocate_dwp_loaded_cutus_table): Return htab_up.  Don't allocate
on obstack.

Change-Id: Id61209bf5c6c6faa0c067195af31fbcf26813a3a

Don't allocate DWO file hash on obstack

This changes allocate_dwo_file_hash_table so that it does not use the
objfile obstack to store the contents of the hash table.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (allocate_dwo_file_hash_table): Don't allocate on
obstack.

Change-Id: Ic20a618acc7277e56aa18580c68f75c793bef97b

Change dwarf2_per_objfile::line_header_hash to htab_up

This changes dwarf2_per_objfile::line_header_hash to be an htab_up,
and changes it to use heap allocation.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (~dwarf2_per_objfile): Don't delete
line_header_hash.
(handle_DW_AT_stmt_list): Update.  Don't allocate on obstack.
* dwarf2/read.h (struct dwarf2_per_objfile) <line_header_hash>:
Change type to htab_up.

Change-Id: Icb148a270838c0f96f38fc4a28b5b77d067927b6

Change dwarf2_per_objfile::type_unit_groups to htab_up

This changes dwarf2_per_objfile::type_unit_groups to be an htab_up,
again allowing us to move the memory used by the hash table from the
objfile obstack to the heap.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (allocate_type_unit_groups_table): Return
htab_up.  Don't allocate on obstack.
(get_type_unit_group, dwarf2_build_psymtabs_hard): Update.
* dwarf2/read.h (struct dwarf2_per_objfile) <type_unit_groups>:
Change type to htab_up.

Change-Id: Ia045df0ff3ec30aac813da5a9a2314a607ef7ec8

Change dwarf2_per_objfile::signatured_types to be htab_up

This changes dwarf2_per_objfile::signatured_types to be an htab_up.
This in turn lets us change it not to use the objfile obstack for
allocation; obstack allocation for hash tables is a bad practice
because it leads to excess memory use if the table is ever resized.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.h (struct dwarf2_per_objfile) <signatured_types>:
Change type to htab_up.
* dwarf2/read.c (create_signatured_type_table_from_index)
(create_signatured_type_table_from_debug_names)
(create_all_type_units, add_type_unit)
(lookup_dwo_signatured_type, lookup_signatured_type)
(process_skeletonless_type_unit): Update.
(create_debug_type_hash_table, create_debug_types_hash_table):
Change type of types_htab.
(allocate_signatured_type_table, allocate_dwo_unit_table): Return
htab_up.  Don't allocate on obstack.
(create_cus_hash_table): Change type of cus_htab parameter.
(struct dwo_file) <cus, tus>: Now htab_up.
(lookup_dwo_signatured_type, lookup_dwo_cutu)
(process_dwo_file_for_skeletonless_type_units, lookup_dwo_cutu)
(queue_and_load_all_dwo_tus): Update.
* dwarf2/index-write.c (write_gdbindex): Update.
(write_debug_names): Update.

Change-Id: I290a209b96945fb5f415c82723b62830e9c4b467

Remove DWARF queue-related globals

This removes some queue-related globals from the DWARF reader, in
favor of a new member on dwarf2_per_objfile.  Globals must be avoided
in this code, because they prevent multi-threading the reader.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.h (struct dwarf2_queue_item): Move from
dwarf2/read.c.  Remove "next" member.  Add constructor ntad
destructor.
(struct dwarf2_per_objfile) <queue>: New member.
* dwarf2/read.c (struct dwarf2_queue_item): Move to
dwarf2/read.h.
(dwarf2_queue, dwarf2_queue_tail): Remove.
(class dwarf2_queue_guard): Add parameter to constructor.  Use
DISABLE_COPY_AND_ASSIGN.
<m_per_objfile>: New member.
<~dwarf2_queue_guard>: Rewrite.
(dw2_do_instantiate_symtab, queue_comp_unit, process_queue):
Update.
(~dwarf2_queue_item): New.

Change-Id: Ied1f6ff3691352a66c4709b0b2cba0588f49f79a

Introduce die_info::has_children

Many functions take a "has_children" parameter (either as an in- or
out-parameter).  However, it seems to me that it makes more sense to
have "has_children" be an attribute of a DIE.  Making this change
allows this parameter to be eliminated in many places.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (struct die_info) <has_children>: New member.
(dw2_get_file_names_reader): Remove has_children.
(dw2_get_file_names): Update.
(read_cutu_die_from_dwo): Remove has_children.
(cutu_reader::init_tu_and_read_dwo_dies)
(cutu_reader::cutu_reader): Update.
(process_psymtab_comp_unit_reader, build_type_psymtabs_reader):
Remove has_children.
(build_type_psymtabs_1, process_skeletonless_type_unit)
(load_partial_comp_unit, load_full_comp_unit): Update.
(create_dwo_cu_reader): Remove has_children.
(create_cus_hash_table, read_die_and_children): Update.
(read_full_die_1,read_full_die): Remove has_children.
(read_signatured_type): Update.
(class cutu_reader) <has_children>: Remove.

Change-Id: I0d3d51ae9379554a66032648d51124bba07f87b4

Move DWARF code to dwarf2/ subdirectory

This moves all the remaining DWARF code to the new dwarf2
subdirectory.  This is just a simple renaming, with updates to
includes as needed.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/expr.c: Rename from dwarf2expr.c.
* dwarf2/expr.h: Rename from dwarf2expr.h.
* dwarf2/frame-tailcall.c: Rename from dwarf2-frame-tailcall.c.
* dwarf2/frame-tailcall.h: Rename from dwarf2-frame-tailcall.h.
* dwarf2/frame.c: Rename from dwarf2-frame.c.
* dwarf2/frame.h: Rename from dwarf2-frame.h.
* dwarf2/index-cache.c: Rename from dwarf-index-cache.c.
* dwarf2/index-cache.h: Rename from dwarf-index-cache.h.
* dwarf2/index-common.c: Rename from dwarf-index-common.c.
* dwarf2/index-common.h: Rename from dwarf-index-common.h.
* dwarf2/index-write.c: Rename from dwarf-index-write.c.
* dwarf2/index-write.h: Rename from dwarf-index-write.h.
* dwarf2/loc.c: Rename from dwarf2loc.c.
* dwarf2/loc.h: Rename from dwarf2loc.h.
* dwarf2/read.c: Rename from dwarf2read.c.
* dwarf2/read.h: Rename from dwarf2read.h.
* dwarf2/abbrev.c, aarch64-tdep.c, alpha-tdep.c,
amd64-darwin-tdep.c, arc-tdep.c, arm-tdep.c, bfin-tdep.c,
compile/compile-c-symbols.c, compile/compile-cplus-symbols.c,
compile/compile-loc2c.c, cris-tdep.c, csky-tdep.c, findvar.c,
gdbtypes.c, guile/scm-type.c, h8300-tdep.c, hppa-bsd-tdep.c,
hppa-linux-tdep.c, i386-darwin-tdep.c, i386-linux-tdep.c,
i386-tdep.c, iq2000-tdep.c, m32c-tdep.c, m68hc11-tdep.c,
m68k-tdep.c, microblaze-tdep.c, mips-tdep.c, mn10300-tdep.c,
msp430-tdep.c, nds32-tdep.c, nios2-tdep.c, or1k-tdep.c,
riscv-tdep.c, rl78-tdep.c, rs6000-tdep.c, rx-tdep.c, s12z-tdep.c,
s390-tdep.c, score-tdep.c, sh-tdep.c, sparc-linux-tdep.c,
sparc-tdep.c, sparc64-linux-tdep.c, sparc64-tdep.c, tic6x-tdep.c,
tilegx-tdep.c, v850-tdep.c, xstormy16-tdep.c, xtensa-tdep.c:
Update.
* Makefile.in (COMMON_SFILES): Update.
(HFILES_NO_SRCDIR): Update.

Change-Id: Ied9ce1436cd27ac4a4cffef10ec92e396f181928

Remove die_reader_specs::comp_dir

die_reader_specs::comp_dir is assigned but never read; this patch
removes it.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (struct die_reader_specs) <comp_dir>: Remove.
(init_cu_die_reader, read_cutu_die_from_dwo): Update.

Change-Id: I9818a2593197a6972cddec23cd2f3dd0ce28f580

Don't declare die_info in dwarf2read.h

There's no need to forward-declare struct die_info in dwarf2read.h.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.h (struct die_info): Don't declare.

Change-Id: I0b8dbf99558b9547d418cfd8ef387a21f7dfa660

Remove die_info_ptr typedef

die_info_ptr is not used and so can be removed.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.h (die_info_ptr): Remove typedef.

Change-Id: Ibd0a5ad55876dc96a35b658adc36348f01e48884

Change attr_form_is_block to be a method

This changes attr_form_is_block to be a method.  This is done
separately because, unlike the other attribute functions,
attr_form_is_block had special handling for the case where the
argument was NULL.  This required auditing each call site; in most
cases, NULL was already ruled out, but in a few spots, an additional
check was needed.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (read_call_site_scope)
(handle_data_member_location, dwarf2_add_member_fn)
(mark_common_block_symbol_computed, read_common_block)
(attr_to_dynamic_prop, partial_die_info::read)
(var_decode_location, dwarf2_fetch_die_loc_sect_off)
(dwarf2_symbol_mark_computed, set_die_type): Update.
* dwarf2/attribute.h (struct attribute) <form_is_block>: Declare
method.
(attr_form_is_block): Don't declare.
* dwarf2/attribute.c (attribute::form_is_block): Now a method.

Change-Id: Idfb290c61d738301ab991666f43e0b9cf577b2ae

Change some attribute functions to be methods

This changes most of the attribute-related functions to be methods.
(attr_form_is_block changed in a subsequent patch.)

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (dwarf2_find_base_address, )
(read_call_site_scope, rust_containing_type)
(dwarf2_get_pc_bounds, dwarf2_record_block_ranges)
(handle_data_member_location, dwarf2_add_member_fn)
(get_alignment, read_structure_type, process_structure_scope)
(mark_common_block_symbol_computed, read_common_block)
(read_tag_string_type, attr_to_dynamic_prop, read_subrange_type)
(partial_die_info::read, read_attribute_value, new_symbol)
(lookup_die_type, dwarf2_get_ref_die_offset)
(dwarf2_get_attr_constant_value, follow_die_ref_or_sig)
(dwarf2_fetch_die_loc_sect_off, get_DW_AT_signature_type)
(dwarf2_symbol_mark_computed): Update.
* dwarf2/attribute.h (struct attribute) <value_as_address,
form_is_section_offset, form_is_constant, form_is_ref>: Declare
methods.
(value_as_address, attr_form_is_section_offset)
(attr_form_is_constant, attr_form_is_ref): Don't declare.
* dwarf2/attribute.c (attribute::value_as_address)
(attribute::form_is_section_offset, attribute::form_is_constant)
(attribute::form_is_ref): Now methods.

Change-Id: I320dad13002c59b848dc86c39d5d7111c8a15bdc

Create dwarf2/attribute.[ch]

This moves the attribute-related code out of dwarf2read.c and into the
new files dwarf2/attribute.[ch].

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (struct attribute, DW_STRING)
(DW_STRING_IS_CANONICAL, DW_UNSND, DW_BLOCK, DW_SND, DW_ADDR)
(DW_SIGNATURE, struct dwarf_block, attr_value_as_address)
(attr_form_is_block, attr_form_is_section_offset)
(attr_form_is_constant, attr_form_is_ref): Move.
* dwarf2/attribute.h: New file.
* dwarf2/attribute.c: New file, from dwarf2read.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/attribute.c.

Change-Id: I1ea4c146256a1b9e38b66f1c605d782a14eeded7

Create dwarf2/abbrev.[ch]

This moves the abbrev table code out of dwarf2read.c and into new
files dwarf2/abbrev.[ch].

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (abbrev_table_up, struct abbrev_info)
(struct attr_abbrev, ABBREV_HASH_SIZE, struct abbrev_table):
Move.
(read_cutu_die_from_dwo, build_type_psymtabs_1): Update.
(abbrev_table::alloc_abbrev, abbrev_table::add_abbrev)
(abbrev_table::lookup_abbrev, abbrev_table_read_table): Move to
abbrev.c.
* dwarf2/abbrev.h: New file.
* dwarf2/abbrev.c: New file, from dwarf2read.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/abbrev.c.

Change-Id: I87911bc5297de4407587ca849fef8e8d19136c30

Change section functions to be methods of dwarf2_section_info

This changes various section-related functions to be methods on
dwarf2_section_info.  I think this clarifies the role of these
functions.  This also changes one such function to return bool.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (dwarf2_section_buffer_overflow_complaint)
(dwarf2_section_size, dwarf2_get_section_info)
(create_signatured_type_table_from_debug_names)
(create_addrmap_from_aranges, read_debug_names_from_section)
(get_gdb_index_contents_from_section, read_comp_unit_head)
(error_check_comp_unit_head, read_abbrev_offset)
(create_debug_type_hash_table, init_cu_die_reader)
(read_cutu_die_from_dwo, dwarf2_build_psymtabs_hard)
(read_comp_units_from_section, create_cus_hash_table)
(create_dwp_hash_table, create_dwo_unit_in_dwp_v1)
(create_dwp_v2_section, dwarf2_rnglists_process)
(dwarf2_ranges_process, read_die_and_siblings, read_full_die)
(abbrev_table_read_table, read_indirect_string_at_offset_from)
(read_indirect_string_from_dwz, read_addr_index_1)
(read_str_index, dwarf_decode_line_header, skip_form_bytes)
(dwarf_decode_macro_bytes, dwarf_decode_macros)
(fill_in_loclist_baton): Update.
* dwarf2/section.h (struct dwarf2_section_info) <get_name,
get_containing_section, get_bfd_owner, get_bfd_section,
get_file_name, get_id, get_flags, empty, read>: Declare methods.
(dwarf2_read_section, get_section_name, get_section_file_name)
(get_containing_section, get_section_bfd_owner)
(get_section_bfd_section, get_section_name, get_section_file_name)
(get_section_id, get_section_flags, dwarf2_section_empty_p): Don't
declare.
* dwarf2/section.c (dwarf2_section_info::get_containing_section)
(dwarf2_section_info::get_bfd_owner)
(dwarf2_section_info::get_bfd_section)
(dwarf2_section_info::get_name)
(dwarf2_section_info::get_file_name, dwarf2_section_info::get_id)
(dwarf2_section_info::get_flags, dwarf2_section_info::empty)
(dwarf2_section_info::read): Now methods.
* dwarf-index-write.c (class debug_names): Update.

Change-Id: Ic849f182f57a18bad6b1c7c3b9368005d307758a

Create dwarf2/section.[ch]

This moves some section-handling code from dwarf2read.c into new
files, dwarf2/section.[ch].

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.h (struct dwarf2_section_info, dwarf2_read_section):
Move to dwarf2/section.h.
* dwarf2read.c (get_containing_section, get_section_bfd_owner)
(get_section_bfd_section, get_section_name)
(get_section_file_name, get_section_id, get_section_flags)
(dwarf2_section_empty_p, dwarf2_read_section): Moe to
dwarf2/section.c.
* dwarf2/section.h: New file.
* dwarf2/section.c: New file, from dwarf2read.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/section.c.

Change-Id: I9f8498094cf99d9521e9481622ce8adbd453daf4

Create dwarf2/leb.[ch]

This moves some scalar-unpacking code into a couple of new files,
dwarf2/leb.h and dwarf2/leb.c.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.h (read_unsigned_leb128): Don't declare.
* dwarf2read.c (read_1_byte, read_1_signed_byte, read_2_bytes)
(read_2_signed_bytes, read_3_bytes, read_4_bytes)
(read_4_signed_bytes, read_8_bytes): Move to dwarf2/leb.h.
(read_unsigned_leb128, read_signed_leb128): Move to dwarf2/leb.c.
* dwarf2/leb.h: New file, from dwarf2read.c.
* dwarf2/leb.c: New file, from dwarf2read.c.
* dwarf2-frame.c (read_1_byte, read_4_bytes, read_8_bytes):
Remove.
* Makefile.in (CONFIG_SRC_SUBDIR): Add dwarf2.
(COMMON_SFILES): Add dwarf2/leb.c.

Change-Id: Idd19647686c8f959d226a95fdfca4db47c6e96d0

Document the GDB 9.1 release in gdb/ChangeLog

gdb/ChangeLog:

GDB 9.1 released.

Automatic date update in version.in

Make fputs_unfiltered use fputs_maybe_filtered

This patch redefines fputs_unfiltered in utils.c, with new behavior to
forward parameters to fputs_maybe_filtered.  This makes
fputs_unfiltered identical to fputs_filtered, except filtering is
disabled.

Some callers of fputs_unfiltered have been updated to use ui_file_puts
where they were using other ui_file_* functions anyway for IO.

This fixes the problem I saw with \032\032post-prompt annotation being
flushed to stdout in the wrong order.

2020-02-05  Iain Buclaw  <ibuclaw@gdcproject.org>

PR gdb/25190:
        * gdb/remote-sim.c (gdb_os_write_stderr): Update.
        * gdb/remote.c (remote_console_output): Update.
        * gdb/ui-file.c (fputs_unfiltered): Rename to...
        (ui_file_puts): ...this.
        * gdb/ui-file.h (ui_file_puts): Add declaration.
        * gdb/utils.c (emit_style_escape): Update.
        (flush_wrap_buffer): Update.
        (fputs_maybe_filtered): Update.
        (fputs_unfiltered): Add function.

Change-Id: I17ed5078f71208344f2f8ab634a6518b1af6e213

Make gdb_flush also flush the wrap buffer

This changes gdb_flush to also flush the internal wrap buffer.  A few
places needed to continue using the previous approach, so this also
introduces ui_file_flush for those.

2020-02-05  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb/event-loop.c (gdb_wait_for_event): Update.
        * gdb/printcmd.c (printf_command): Update.
        * gdb/remote-fileio.c (remote_fileio_func_write): Update.
        * gdb/remote-sim.c (gdb_os_flush_stdout): Update.
        (gdb_os_flush_stderr): Update.
        * gdb/remote.c (remote_console_output): Update.
        * gdb/ui-file.c (gdb_flush): Rename to...
        (ui_file_flush): ...this.
        (stderr_file::write): Update.
        (stderr_file::puts): Update.
        * gdb/ui-file.h (gdb_flush): Rename to...
        (ui_file_flush): ...this.
        * gdb/utils.c (gdb_flush): Add function.
        * gdb/utils.h (gdb_flush): Add declaration.

Change-Id: I7ca143d30f03dc39f218f6e880eb9bca9e15af39

Revert basenames_may_differ patch

Commit a0c1ffedc regressed certain cases coming from Eclipse.
See PR breakpoints/24915.

gdb/ChangeLog
2020-02-07  Tom Tromey  <tromey@adacore.com>

PR breakpoints/24915:
* source.c (find_and_open_source): Do not check basenames_may_differ.

gdb/testsuite/ChangeLog
2020-02-07  Tom Tromey  <tromey@adacore.com>

PR breakpoints/24915:
* gdb.base/annotate-symlink.exp: Use setup_xfail.

Change-Id: Iadbf42f35eb40c95ad32b2108ae25d8f199998bd

unique.exp: Update contains_unique_symbol

Since commit 9fc0b501af78b changed symbols from a/b to a_val/b_val,
contains_unique_symbol needs adjustment.

* testsuite/ld-unique/unique.exp (contains_unique_symbol): Updated.

Move gdbserver to top level

This patch moves gdbserver to the top level.

This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport.  Changing this will
be done in a separate patch.

[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score.  This makes
sense, because there is apparently not actually a gdbserver port here.

[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.

[v4] This version adds documentation and removes some unnecessary
top-level dependencies.

[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.

Tested by the buildbot.

ChangeLog
2020-02-07  Tom Tromey  <tom@tromey.com>
    Pedro Alves  <palves@redhat.com>

* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.

gdb/ChangeLog
2020-02-07  Tom Tromey  <tom@tromey.com>

* README: Update gdbserver documentation.
* gdbserver: Move to top level.
* configure.tgt (build_gdbserver): Remove.
* configure.ac: Remove --enable-gdbserver.
* configure: Rebuild.
* Makefile.in (distclean): Don't mention gdbserver.

Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e

Update release making notes.

* README-how-to-make-a-release: Add note about updating the
  GAS/NEWS URL in the next release.

Add support for the GBZ80 and Z80N variants of the Z80 architecture, and add DWARF debug info support to the Z80 assembler.

PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.

binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.

gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80.  Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.

include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.

ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file

opcodes * z80-dis.c: Add support for GBZ80 opcodes.

pr25022.d: Xfail more targets without ldelf_before_place_orphans

PR ld/25022
* testsuite/ld-elf/pr25022.d: Xfail more targets which don't use
ldelf_before_place_orphans.

Stop the BFD library from complaining if a segment has no sections attached to it.

PR 23932
* elf.c (rewrite_elf_program_header): Do not complain if no
sections are mapped to a segment.

Silcence a compile time warning message building the binutils with gcc-10 on an s390 host.

* dwarf.c (display_debug_lines_decoded): Force a NUL termination
of the truncated file name.

ELF: Discard a section if any of its linked-to sections has been discarded

Add ldelf_before_place_orphans to call before lang_place_orphans to
discard a section if any of its linked-to sections has been discarded.

PR ld/25022
* emultempl/aix.em (ld_${EMULATION_NAME}_emulation): Add
before_place_orphans_default.
* emultempl/armcoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/beos.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/linux.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/msp430.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pe.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pep.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/ticoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/vanilla.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/elf.em (ld_${EMULATION_NAME}_emulation): Use
ldelf_before_place_orphans.
* ldelf.c (ldelf_before_place_orphans): New.
* ldelf.h (ldelf_before_place_orphans): Likewise.
* ldemul.c (ldemul_before_place_orphans): Likewise.
(before_place_orphans_default): Likewise.
* ldemul.h (ldemul_before_place_orphans): Likewise.
(before_place_orphans_default): Likewise.
(ld_emulation_xfer_struct): Add before_place_orphans.
* ldlang.c (lang_process): Call ldemul_before_place_orphans
before lang_place_orphans.
* testsuite/ld-elf/pr25022.d: New file.
* testsuite/ld-elf/pr25022.s: Likewise.
* testsuite/ld-elf/pr25022.t: Likewise.

ld: Issue an error for GC on __patchable_function_entries section

__patchable_function_entries section is generated by a compiler with
-fpatchable-function-entry=XX.  The assembly code looks like this:

---
.text
.globl _start
.type _start, %function
_start:
.section __patchable_function_entries,"aw",%progbits
.dc.a .LPFE1
.text
.LPFE1:
.byte 0
---

But --gc-sections will silently remove __patchable_function_entries
section and generate corrupt result.  This patch disallows garbage
collection on __patchable_function_entries section without linked-to
section.

bfd/

PR ld/25490
* elflink.c (_bfd_elf_gc_mark_extra_sections): Issue an error
for garbage collection on __patchable_function_entries section
without linked-to section.

ld/

PR ld/25490
* testsuite/ld-elf/pr25490-1.d: New file.
* testsuite/ld-elf/pr25490-1.s: Likewise.

ELF: Support the section flag 'o' in .section directive

As shown in

https://sourceware.org/bugzilla/show_bug.cgi?id=25490

--gc-sections will silently remove __patchable_function_entries section
and generate corrupt result.  This patch adds the section flag 'o' to
.section directive:

.section __patchable_function_entries,"awo",@progbits,foo
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat
.section __patchable_function_entries,"awo",@progbits,bar,unique,4
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat,unique,1

which specifies the symbol name which the section references.  Assmebler
will set its elf_linked_to_section to a local section where the symbol
is defined.

Linker is updated to call mark_hook if gc_mark of any of its linked-to
sections is set after all sections, except for backend specific ones,
have been garbage collected.

bfd/

PR gas/25381
* bfd-in2.h: Regenerated.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Call mark_hook
on section if gc_mark of any of its linked-to sections is set
and don't set gc_mark again.
* section.c (asection): Add linked_to_symbol_name to map_head
union.

gas/

PR gas/25381
* config/obj-elf.c (get_section): Also check
linked_to_symbol_name.
(obj_elf_change_section): Also set map_head.linked_to_symbol_name.
(obj_elf_parse_section_letters): Handle the 'o' flag.
(build_group_lists): Renamed to ...
(build_additional_section_info): This.  Set elf_linked_to_section
from map_head.linked_to_symbol_name.
(elf_adjust_symtab): Updated.
* config/obj-elf.h (elf_section_match): Add linked_to_symbol_name.
* doc/as.texi: Document the 'o' flag.
* testsuite/gas/elf/elf.exp: Run PR gas/25381 tests.
* testsuite/gas/elf/section18.d: New file.
* testsuite/gas/elf/section18.s: Likewise.
* testsuite/gas/elf/section19.d: Likewise.
* testsuite/gas/elf/section19.s: Likewise.
* testsuite/gas/elf/section20.d: Likewise.
* testsuite/gas/elf/section20.s: Likewise.
* testsuite/gas/elf/section21.d: Likewise.
* testsuite/gas/elf/section21.l: Likewise.
* testsuite/gas/elf/section21.s: Likewise.

ld/

PR ld/24526
PR ld/25021
PR ld/25490
* testsuite/ld-elf/elf.exp: Run PR ld/25490 tests.
* testsuite/ld-elf/pr24526.d: New file.
* testsuite/ld-elf/pr24526.s: Likewise.
* testsuite/ld-elf/pr25021.d: Likewise.
* testsuite/ld-elf/pr25021.s: Likewise.
* testsuite/ld-elf/pr25490-2-16.rd: Likewise.
* testsuite/ld-elf/pr25490-2-32.rd: Likewise.
* testsuite/ld-elf/pr25490-2-64.rd: Likewise.
* testsuite/ld-elf/pr25490-2.s: Likewise.
* testsuite/ld-elf/pr25490-3-16.rd: Likewise.
* testsuite/ld-elf/pr25490-3-32.rd: Likewise.
* testsuite/ld-elf/pr25490-3-64.rd: Likewise.
* testsuite/ld-elf/pr25490-3.s: Likewise.
* testsuite/ld-elf/pr25490-4-16.rd: Likewise.
* testsuite/ld-elf/pr25490-4-32.rd: Likewise.
* testsuite/ld-elf/pr25490-4-64.rd: Likewise.
* testsuite/ld-elf/pr25490-4.s: Likewise.
* testsuite/ld-elf/pr25490-5-16.rd: Likewise.
* testsuite/ld-elf/pr25490-5-32.rd: Likewise.
* testsuite/ld-elf/pr25490-5-64.rd: Likewise.
* testsuite/ld-elf/pr25490-5.s: Likewise.
* testsuite/ld-elf/pr25490-6-16.rd: Likewise.
* testsuite/ld-elf/pr25490-6-32.rd: Likewise.
* testsuite/ld-elf/pr25490-6-64.rd: Likewise.
* testsuite/ld-elf/pr25490-6.s: Likewise.

Automatic date update in version.in

sim/aarch64: Fix register ordering bug in blr (PR sim/25318)

A comment in the implementation of blr says:

  /* The pseudo code in the spec says we update LR before fetching.
     the value from the rn.  */

With 'rn' being the register holding the destination address.

This may have been true at one point, but the ISA manual now clearly
shows the destination register being read before the link register is
written.

This commit updates the implementation of blr to match.

sim/aarch64/ChangeLog:

PR sim/25318
* simulator.c (blr): Read destination register before calling
aarch64_save_LR.

Change-Id: Icb1c556064e3d9c807ac28440475caa205ab1064

gdb: Catch exceptions if the source file is not found

The source_cache::ensure method may throw an exception through
the invocation of source_cache::get_plain_source_lines. This
happens when the source file is not found. The expected behaviour
of "ensure" is only returning "true" or "false" according to the
documentation in the header file.

So far, if gdb is in source layout and a file is missing, you see
some outputs like below:

 ,---------------------------------------------.
 | test.c file is loaded in the source window. |
 |                                             |
 | int main()                                  |
 | ...                                         |
 |---------------------------------------------|
 | Remote debugging using :1234                |
 | __start () at /path/to/crt0.S:141           |
 | /path/to/crt0.S: No such file or directory. |
 | (gdb) p/x $pc                               |
 | $1 = 0x124                                  |
 | (gdb) n                                     |
 | /path/to/crt0.S: No such file or directory. |
 | (gdb) p/x $pc                               |
 | $2 = 0x128                                  |
 | (gdb) [pressing arrow-down key]             |
 | (gdb) terminate called after throwing an    |
 |       instance of 'gdb_exception_error'     |
 `---------------------------------------------'
Other issues have been encountered as well [1].

The patch from Pedro [2] which is about preventing exceptions
from crossing the "readline" mitigates the situation by not
causing gdb crash, but still there are lots of errors printed:

 ,---------------------------------------------.
 | test.c file is loaded in the source window. |
 |                                             |
 | int main()                                  |
 | ...                                         |
 |---------------------------------------------|
 | Remote debugging using :1234                |
 | __start () at /path/to/crt0.S:141           |
 | /path/to/crt0.S: No such file or directory. |
 | (gdb) [pressing arrow-down key]             |
 | /path/to/crt0.S: No such file or directory. |
 | (gdb) [pressing arrow-down key]             |
 | /path/to/crt0.S: No such file or directory. |
 | (gdb) [pressing arrow-up key]               |
 | /path/to/crt0.S: No such file or directory. |
 `---------------------------------------------'

With the changes of this patch, the behavior is like:
 ,---------------------------------------------.
 | initially, source window is empty because   |
 | crt0.S is not found and according to the    |
 | program counter that is the piece of code   |
 | being executed.                             |
 |                                             |
 | later, when we break at main (see commands  |
 | below), this window will be filled with the |
 | the contents of test.c file.                |
 |---------------------------------------------|
 | Remote debugging using :1234                |
 | __start () at /path/to/crt0.S:141           |
 | (gdb) p/x $pc                               |
 | $1 = 0x124                                  |
 | (gdb) n                                     |
 | (gdb) p/x $pc                               |
 | $2 = 0x128                                  |
 | (gdb) b main                                |
 | Breakpoint 1 at 0x334: file test.c, line 8. |
 | (gdb) cont                                  |
 | Continuing.                                 |
 | Breakpoint 1, main () at hello.c:8          |
 | (gdb) n                                     |
 | (gdb)                                       |
 `---------------------------------------------'

There is no crash and the error message is completely
gone. Maybe it is good practice that the error is
shown inside the source window.

I tested this change against gdb.base/list-missing-source.exp
and there was no regression.

[1]
It has also been observed in the past that the register
values are not transferred from qemu's gdb stub, see:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/226

[2]
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=2f267673f0fdee9287e6d404ecd4f2d29da0d2f2

gdb/ChangeLog:

* source-cache.c (source_cache::ensure): Surround
get_plain_source_lines with a try/catch.
(source_cache::get_line_charpos): Get rid of try/catch
and only check for the return value of "ensure".
* tui/tui-source.c (tui_source_window::set_contents):
Simplify "nlines" calculation.

gdb/testsuite/ChangeLog:

* gdb.tui/tui-missing-src.exp: Add the "missing source
file" test for the TUI.

gdb/testsuite: Avoid leaking a port number into results summary

Give a test a real name in order to avoid including a port number in
the results summary file - which makes comparing test results between
runs hard.

gdb/testsuiteChangeLog:

* gdb.server/multi-ui-errors.exp: Give a test a real name to avoid
including a port number in the output.

Change-Id: I19334e176ac15aee2a9732a6060c58153d9fb793

gdb: Add myself as one of GDB maintainer

May this be the beginning of a great flow of patches.

2020-02-06  Shahab Vahedi  <shahab@synopsys.com>

* MAINTAINERS (Write After Approval): Add myself.

[2.34] Mention x86 assembler options to align branches

* NEWS: Mention x86 assembler options to align branches for
binutils 2.34.

check_gc_sections_available: Mark z80 as not supported

[hjl@gnu-cfl-2 tmpdir]$ ../ld-new -V --gc-sections pr22319.o
GNU ld (GNU Binutils) 2.34.50.20200206
  Supported emulations:
   elf32z80
../ld-new: warning: gc-sections option ignored
../ld-new: warning: cannot find entry symbol _start; defaulting to 0000000000000100
[hjl@gnu-cfl-2 tmpdir]$

* testsuite/lib/ld-lib.exp (check_gc_sections_available): Mark
z80 as not supported.

V850/BFD: Fix uninitialized `insn[4]' with R_V850_LONGJUMP warning

Correctly point at `insn[2]' rather than `insn[4]' in determining that
the third instruction from where an R_V850_LONGJUMP relocation points at
is not a recognized one, fixing a problem with commit 86aba9dbfa7e ("Add
linker relaxation to v850 toolchain") resulting in a build failure like:

.../bfd/elf32-v850.c: In function 'v850_elf_relax_section':
.../bfd/elf32-v850.c:3854:5: error: 'insn[4]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
 3854 |     _bfd_error_handler
      |     ^~~~~~~~~~~~~~~~~~
 3855 |       /* xgettext:c-format */
      |       ~~~~~~~~~~~~~~~~~~~~~~~
 3856 |       (_("%pB: %#" PRIx64 ": warning: %s points to "
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 3857 |          "unrecognized insn %#x"),
      |          ~~~~~~~~~~~~~~~~~~~~~~~~~
 3858 |        abfd,
      |        ~~~~~
 3859 |        (uint64_t) (irel->r_offset + no_match),
      |        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 3860 |        "R_V850_LONGJUMP",
      |        ~~~~~~~~~~~~~~~~~~
 3861 |        insn[no_match]);
      |        ~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Makefile:1608: recipe for target 'elf32-v850.lo' failed
make[4]: *** [elf32-v850.lo] Error 1

with GCC 10.

bfd/
* elf32-v850.c (v850_elf_relax_section): Fix the index used for
reporting an unrecognized instruction with R_V850_LONGJUMP.

Fix attributation of previous delta

Jump visualization: Handle the case where the disassembled bytes occupy two lines.

* objdump.c (print_jump_visualisation): New function.
(disassemble_bytes): Call new function.

x86: Run unique tests only for ELF targets

* testsuite/gas/i386/i386.exp: Run unique and x86-64-unique
only for ELF targets.
* testsuite/gas/i386/unique.d: Don't xfail.
* testsuite/gas/i386/x86-64-unique.d: Likewise.

Enable ld-ifunc tests for more targets

Also fix some ix86 fails.

* testsuite/ld-ifunc/ifunc.exp: Enable for more targets, specifying
targets that don't support ifunc rather than ones that do.
(contains_irelative_reloc): Match R_PARISC_IPLT.
* testsuite/ld-ifunc/lib.c: Don't use .set in asm.
* testsuite/ld-ifunc/ifunc-23-x86.s,
* testsuite/ld-ifunc/ifunc-24-x86.s,
* testsuite/ld-ifunc/ifunc-25-x86.s,
* testsuite/ld-ifunc/ifunc-4-local-x86.s,
* testsuite/ld-ifunc/ifunc-4-x86.s: Define _main.
* testsuite/ld-ifunc/ifunc-10-i386.d,
* testsuite/ld-ifunc/ifunc-11-i386.d,
* testsuite/ld-ifunc/ifunc-12-i386.d,
* testsuite/ld-ifunc/ifunc-13-i386.d,
* testsuite/ld-ifunc/ifunc-14a-i386.d,
* testsuite/ld-ifunc/ifunc-14b-i386.d,
* testsuite/ld-ifunc/ifunc-14c-i386.d,
* testsuite/ld-ifunc/ifunc-14d-i386.d,
* testsuite/ld-ifunc/ifunc-14e-i386.d,
* testsuite/ld-ifunc/ifunc-14f-i386.d,
* testsuite/ld-ifunc/ifunc-15-i386.d,
* testsuite/ld-ifunc/ifunc-16-i386-now.d,
* testsuite/ld-ifunc/ifunc-16-i386.d,
* testsuite/ld-ifunc/ifunc-17a-i386.d,
* testsuite/ld-ifunc/ifunc-17b-i386.d,
* testsuite/ld-ifunc/ifunc-18a-i386.d,
* testsuite/ld-ifunc/ifunc-18b-i386.d,
* testsuite/ld-ifunc/ifunc-19a-i386.d,
* testsuite/ld-ifunc/ifunc-19b-i386.d,
* testsuite/ld-ifunc/ifunc-2-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-i386.d,
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d,
* testsuite/ld-ifunc/ifunc-2-local-i386.d,
* testsuite/ld-ifunc/ifunc-20-i386.d,
* testsuite/ld-ifunc/ifunc-21-i386.d,
* testsuite/ld-ifunc/ifunc-22-i386.d,
* testsuite/ld-ifunc/ifunc-26.d,
* testsuite/ld-ifunc/ifunc-5a-i386.d,
* testsuite/ld-ifunc/ifunc-5a-local-i386.d,
* testsuite/ld-ifunc/ifunc-5b-i386.d,
* testsuite/ld-ifunc/ifunc-5b-local-i386.d,
* testsuite/ld-ifunc/ifunc-5r-local-i386.d,
* testsuite/ld-ifunc/ifunc-6a-i386.d,
* testsuite/ld-ifunc/ifunc-6b-i386.d,
* testsuite/ld-ifunc/ifunc-7a-i386.d,
* testsuite/ld-ifunc/ifunc-7b-i386.d,
* testsuite/ld-ifunc/ifunc-8-i386.d,
* testsuite/ld-ifunc/ifunc-9-i386.d,
* testsuite/ld-ifunc/pr17154-i386-now.d,
* testsuite/ld-ifunc/pr17154-i386.d: xfail lynxos, nto, and solaris.

xfail x86 gas unique test

* testsuite/gas/i386/unique.d: xfail for non-elf targets.
* testsuite/gas/i386/x86-64-unique.d: Likewise.

mbind gas tests and supports_gnu_osabi testsuite infrastructure

With the addition of section16 tests we have multiple tests
advertising themselves as "mbind sections" and "mbind section
contents".  This patch fixes that, and fails on quite a few targets
that force an OSABI value.  It's a pain specifying all the relevant
arm targets on an xfail line, so I wrote supports_gnu_osabi.

binutils/
* testsuite/lib/binutils-common.exp (match_target): Accept '!' before
TCL procedure.
(supports_gnu_osabi): New procedure.
(is_generic): New, from ld-lib.exp.
(supports_gnu_unique): Use the above.
gas/
* testsuite/gas/elf/section12a.d: Use supports_gnu_osabi in
xfail, and rename test.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
ld/
* testsuite/lib/ld-lib.exp (is_generic): Delete.
* testsuite/ld-unique/unique.exp: Exclude tic6x.

i386-moss and i386-openbsd ld config

i386-moss is an ELF target needing ldelf.c.  x86 openbsd wouldn't even
build, so I added entries to do the same as netbsd.  Quite likely this
isn't ideal but if the openbsd folk don't contribute their changes
this is what they get.

* configure.tgt (i[3-7]86-*-moss*): Don't clear targ_extra_ofiles.
(i[3-7]86-*-openbsd*, x86_64-*-openbsd*): Add.

Disambiguate info_print_options

struct info_print_options is defined in both symtab.c and stack.c, which is
an ODR violation. So, I am renaming info_print_options and related
structs/functions in symtab.c:

info_print_options                ==> info_vars_funcs_options
info_print_options_defs           ==> info_vars_funcs_options_defs
make_info_print_options_def_group ==> make_info_vars_funcs_options_def_group
info_print_command_completer      ==> info_vars_funcs_command_completer

gdb/ChangeLog:

* symtab.c (info_print_options): Rename to
info_vars_funcs_options.
(info_print_options_defs): Rename to
info_vars_funcs_options_defs.
(make_info_print_options_def_group): Rename to
make_info_vars_funcs_options_def_group.
(info_print_command_completer): Rename to
info_vars_funcs_command_completer.
(info_variables_command): Apply name changes.
(info_functions_command): Likewise.
(_initialize_symtab): Likewise.

Automatic date update in version.in

Fix base class function call

This was a typo introduced in f6ac5f3d63e03a81c4ff3749aba234961cc9090e.

Found by looking through NetBSD's GDB patches:
https://github.com/NetBSD/pkgsrc-wip/blob/master/gdb-netbsd/patches/patch-gdb_sparc-nat.h

This patch can't be tested on Linux because Linux does not use the
sparc_target template.

gdb/ChangeLog:

2020-02-05  Christian Biesinger  <cbiesinger@google.com>

* sparc-nat.h (struct sparc_target) <xfer_partial>: Fix base class
function call.

Change-Id: I4fa88cbdc365efe89b84cc0619b60db38718d9ce

Fix header guard name in #endif comment

Makes the comment match the macro name in the #define/#ifdef.

gdb/ChangeLog:

2020-02-05  Christian Biesinger  <cbiesinger@google.com>

* ppc-nbsd-tdep.h: Fix macro name in #endif comment.

Change-Id: If7b2e49e65495b8eb9ed7b6c9a11277579a93a05

RISC-V/Linux/native: Factor out target description determination

In preparation for RISC-V/Linux `gdbserver' support factor out parts of
native target description determination code that can be shared between
the programs.

gdb/
* nat/riscv-linux-tdesc.h: New file.
* nat/riscv-linux-tdesc.c: New file, taking code from...
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
... here.
* configure.nat <linux> <riscv*>: Add nat/riscv-linux-tdesc.o to
NATDEPFILES.

Automatic date update in version.in

Re: Support fusion for ELFv2 stubs

git commit 397998fc32a3 changed the stubs but not the comments.

* elf64-ppc.c (ppc_stub_plt_branch): Match comment with reality.

gdb/fortran: Allow for using Flang in Fortran testing

In lib/fortran.exp, in the helper function fortran_int4, there is
currently no support for the LLVM Fortran compiler, Flang.  As a
result we return the default pattern 'unknown' to match against all
4-byte integer types, which causes many tests to fail.

The same is true for all of the other helper functions related to
finding a suitable type pattern.

This commit adds support for Flang.  There should be no change when
testing with gfortran.

gdb/testsuite/ChangeLog:

* lib/fortran.exp (fortran_int4): Handle clang.
(fortran_int8): Likewise.
(fortran_real4): Likewise.
(fortran_real8): Likewise.
(fortran_complex4): Likewise.
(fortran_logical4): Likewise.
(fortran_character1): Likewise.

Change-Id: Ife0d9828f78361fbd992bf21af746042b017dafc

gdb/sim: Assert that the simulator ptid is not null_ptid

We assign the simulator inferior a fake ptid.  If this ptid is ever
set to null_ptid then we are going to run into problems - the
simulator ptid is what we return from gdbsim_target::wait, and this in
turn is used to look up the inferior data with a call to
find_inferior_pid, which asserts the pid is not 0 (which it is in
null_pid).

This commit adds an assert that the simulator's fake pid is not
null_ptid.  There should be no user visible changes after this commit.

gdb/ChangeLog:

* remote-sim.c (sim_inferior_data::sim_inferior_data): Assert that
we don't set the fake simulator ptid to the null_ptid.

Change-Id: I6e08effe70e70855aea13c9caf4fd6913d5af56d

[gdb/testsuite] Add note to 'Race detection' entry in README

Add note to 'Race detection' entry in README about the possibility that
check-read1 makes failing tests pass.

gdb/testsuite/ChangeLog:

2020-02-04  Tom de Vries  <tdevries@suse.de>

* README (Race detection): Add note.

Change-Id: I12ef2f0ec35abc5a0221585bf30e5f4f0616aa7c

[gdb/testsuite] Make inferior_exited_re match a single line

The current inferior_exited_re regexp contains a '.*':
...
set inferior_exited_re "(?:\\\[Inferior \[0-9\]+ \\(.*\\) exited)"
...

This means that while matching a single line:
...
$ tclsh
% set re "(?:\\\[Inferior \[0-9\]+ \\(.*\\) exited)"
(?:\[Inferior [0-9]+ \(.*\) exited)
% set line "\[Inferior 1 (process 33) exited\]\n"
[Inferior 1 (process 33) exited]

% regexp $re $line
1
...
it also matches more than one line:
...
$ tclsh
% set re "(?:\\\[Inferior \[0-9\]+ \\(.*\\) exited)"
(?:\[Inferior [0-9]+ \(.*\) exited)
% set line "\[Inferior 1 (process 33) exited\]\n\[Inferior 2 (process 44) exited\]\n"
[Inferior 1 (process 33) exited]
[Inferior 2 (process 44) exited]

% regexp $re $line
1
...

Fix this by using "\[^\n\r\]*" instead of ".*".

Build and reg-tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-02-04  Tom de Vries  <tdevries@suse.de>

* lib/gdb.exp (inferior_exited_re): Use "\[^\n\r\]*" instead of ".*".

Change-Id: Id7b1dcecd8c7fda3d1ab34b4fa1364d301748333

Minor fix for R_PPC_VLE_ADDR20

It is incorrect to "continue" in the ppc_elf_relocate_section reloc
processing loop except when editing or deleting relocs.  The normal
loop processing arranges to write the relocs if shuffling them over a
deleted entry.  Deleting only happens for debug sections currently and
those sections won't contain R_PPC_VLE_ADDR20 relocs, so this patch
doesn't fix a bug that would trigger with any normal object file.

* elf32-ppc.c (ppc_elf_relocate_section): After applying
R_PPC_VLE_ADDR20, goto copy_reloc.

Missing objdump dependency od-elf32_avr

* Makefile.am (CFILES): Add od-elf32_avr.c.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.

[gdb/testsuite] Use non-capturing parentheses for inferior_exited_re

The inferior_exited_re regexp uses capturing parentheses by default:
...
set inferior_exited_re "(\\\[Inferior \[0-9\]+ \\(.*\\) exited)"
...

The parentheses are there to be able to use the expression as an atom, f.i.,
to have '+' apply to the whole regexp in "${inferior_exited_re}+".

But the capturing is not necessary, and it can be confusing because it's not
obvious in a regexp using "$inferior_exited_re (bla|bli)" that the first
captured expression is in $inferior_exited_re.

Replace by non-capturing parentheses.  If we still want to capture the
expression, we can simply (and more clearly) use "($inferior_exited_re)".

Build and reg-tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-02-04  Tom de Vries  <tdevries@suse.de>

* lib/gdb.exp (inferior_exited_re): Use non-capturing parentheses.

Change-Id: I7640c6129b1ada617424d6a63730d4b119c58ef3

Change ints to bools around thread_info executing/resumed

Switch thread_info::resumed to bool (thread_info::executing already is a bool),
and try to change everything more or less related to that to consistently use
true/false instead of 1/0.

gdb/ChangeLog:

* fork-child.c (gdb_startup_inferior): Use bool instead of int.
* gdbthread.h (class thread_info) <resumed>: Likewise.
* infrun.c (resume_1): Likewise.
(proceed): Likewise.
(infrun_thread_stop_requested): Likewise.
(stop_all_threads): Likewise.
(handle_inferior_event): Likewise.
(restart_threads): Likewise.
(finish_step_over): Likewise.
(keep_going_stepped_thread): Likewise.
* linux-nat.c (attach_proc_task_lwp_callback): Likewise.
(linux_handle_extended_wait): Likewise.
* record-btrace.c (get_thread_current_frame_id): Likewise.
* record-full.c (record_full_wait_1): Likewise.
* remote.c (remote_target::process_initial_stop_replies): Likewise.
* target.c (target_resume): Likewise.
* thread.c (set_running_thread): Likewise.

ubsan: d30v: negation of -2147483648

include/
* opcode/d30v.h (struct pd_reg): Make value field unsigned.
opcodes/
* d30v-dis.c (print_insn): Make "val" and "opnum" unsigned.

gdb: fix powerpc disassembly tests

This patch fixes test failures power8 and power9 caused by changes on
opcodes:

The dissasembler does not emit whitespace for instructions
anymore (c2b1c2754526acff8aae2fe8f5a56c2dd11d0b7f)

The dissasembler generates extended mnemonics for some instructions
instead (aae9718e4d4e8d01dcee22684e82b000203d3e52)

The ldmx instruction was removed. This instruction was never
implemented (6fbc939cfdbdf02f205c20925583738b0f835e62)

gdb/testsuite/ChangeLog:
2020-02-03  Rogerio A. Cardoso  <rcardoso@linux.ibm.com>

* gdb.arch/powerpc-power8.exp: Delete trailing whitespace of
tbegin., tend. instructions. Replace bctar-, bctar+, bctarl-,
bctarl+ extended mnemonics when avaliable by bgttar, bnstarl,
blttar, bnetarl.
* gdb.arch/powerpc-power8.s: Fix comments. Fix instructions
binary for blttar, bnetarl.
* gdb.arch/powerpc-power9.exp: Delete trailing whitespace of
wait instruction. Delete ldmx test.
* gdb.arch/powerpc-power9.s: Delete ldmx instruction.

Fixed gdb to print arrays with very high indexes

In the function f77_print_array_1, the variable 'i' which holds the
index is of datatype 'int', while bounds are of datatype LONGEST. Due to
size of int being smaller than LONGEST, the variable 'i' stores
incorrect values for high indexes (higher than max limit of int).  Due
to this issue in sources, two abnormal behaviors are seen while printing
arrays with high indexes (please check array-bounds-high.f90) For high
indexes with negative sign, gdb prints empty array even if the array has
elements.

    (gdb) p arr
    $1 = ()

For high indexes with positive sign, gdb crashes.  We have now changed
the datatype of 'i' to LONGEST which is same as datatype of bounds.

gdb/ChangeLog:

* f-valprint.c (f77_print_array_1): Changed datatype of index
variable to LONGEST from int to enable it to contain bound
values correctly.

gdb/testsuite/ChangeLog:

* gdb.fortran/array-bounds-high.exp: New file.
* gdb.fortran/array-bounds-high.f90: New file.

Change-Id: Ie2dce9380a249e634e2684b9c90f225e104369b7

Automatic date update in version.in

readelf: add missing newlines to error messages

* readelf.c (dump_relocations, dump_relocations)
(decode_arm_unwind_bytecode, process_dynamic_section)
(get_symbol_visibility, get_alpha_symbol_other): Add newline to
error message.

RISC-V/Linux/native: Determine FLEN dynamically

Fix RISC-V native Linux support to handle a 64-bit FPU (FLEN == 64) with
both RV32 and RV64 systems, which is a part of the current Linux ABI for
hard-float systems, rather than assuming that (FLEN == XLEN) in target
description determination and that (FLEN == 64) in register access.

We can do better however and not rely on any particular value of FLEN
and probe for it dynamically, by observing that the PTRACE_GETREGSET
ptrace(2) call will only accept an exact regset size, and that will
reflect FLEN.  Therefore iterate over the call in target description
determination with a geometrically increasing regset size until a match
is marked by a successful ptrace(2) call completion or we run beyond the
maximum size we can support.

Update register accessors accordingly, using FLEN determined to size the
buffer used for NT_PRSTATUS requests and then to exchange data with the
regcache.

Also handle a glibc bug where ELF_NFPREG is defined in terms of NFPREG,
however NFPREG is nowhere defined.

gdb/
* riscv-linux-nat.c [!NFPREG] (NFPREG): New macro.
(supply_fpregset_regnum, fill_fpregset): Handle regset buffer
offsets according to FLEN determined.
(riscv_linux_nat_target::read_description): Determine FLEN
dynamically.
(riscv_linux_nat_target::fetch_registers): Size regset buffer
according to FLEN determined.
(riscv_linux_nat_target::store_registers): Likewise.

Fix compilation error with musl in gdb/testsuite/gdb.base/fileio.c

Musl is giving warnings about these includes in this way:
warning: #warning redirecting incorrect #include <sys/errno.h> to <errno.h>
warning: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>

gdb/testsuite/Changelog:

* gdb.base/fileio.c: Remove #include of <sys/errno.h>.
Replace #include of <sys/fcntl.h> by <fcntl.h>.

binutils: drop redundant 'program_name' definition (-fno-common)

* coffdump.c (program_name): Drop redundant definition.
* srconv.c (program_name): Likewise
* sysdump.c (program_name): Likewise

Signed-off-by: Sergei Trofimovich <siarheit@google.com>

ubsan: m32c: left shift of negative value

cpu/
* m32c.cpu (f-dsp-64-s16): Mask before shifting signed value.
opcodes/
* m32c-ibld.c: Regenerate.

section.c: Fix typo in comments (withe -> with)

* bfd-in2.h: Regenerated.
* section.c (SEC_ASSEMBLER_SECTION_ID): Fix a typo in comments.

ELF: Add support for unique section ID to assembler

Clang's integrated assembler supports multiple section with the same
name:

.section .text,"ax",@progbits,unique,1
nop
.section .text,"ax",@progbits,unique,2
nop

"unique,N" assigns the number, N, as the section ID, to a section.  The
valid values of the section ID are between 0 and 4294967295.  It can be
used to distinguish different sections with the same section name.

This is useful with -fno-unique-section-names -ffunction-sections.
-ffunction-sections by default generates .text.foo, .text.bar, etc.
Using the same string can save lots of space in .strtab.

This patch adds section_id to bfd_section and reuses the linker
internal bit in BFD section flags, SEC_LINKER_CREATED, for assmebler
internal use to mark valid section_id.  It also updates objdump to
compare section pointers if 2 sections comes from the same file since
2 different sections can have the same section name.

bfd/

PR gas/25380
* bfd-in2.h: Regenerated.
* ecoff.c (bfd_debug_section): Add section_id.
* section.c (bfd_section): Add section_id.
(SEC_ASSEMBLER_SECTION_ID): New.
(BFD_FAKE_SECTION): Add section_id.

binutils/

PR gas/25380
* objdump.c (sym_ok): Return FALSE if 2 sections are in the
same file with different section pointers.

gas/

PR gas/25380
* config/obj-elf.c (section_match): Removed.
(get_section): Also match SEC_ASSEMBLER_SECTION_ID and
section_id.
(obj_elf_change_section): Replace info and group_name arguments
with match_p.  Also update the section ID and flags from match_p.
(obj_elf_section): Handle "unique,N".  Update call to
obj_elf_change_section.
* config/obj-elf.h (elf_section_match): New.
(obj_elf_change_section): Updated.
* config/tc-arm.c (start_unwind_section): Update call to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texi: Document "unique,N" in .section directive.
* testsuite/gas/elf/elf.exp: Run "unique,N" tests.
* testsuite/gas/elf/section15.d: New file.
* testsuite/gas/elf/section15.s: Likewise.
* testsuite/gas/elf/section16.s: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
* testsuite/gas/elf/section17.d: Likewise.
* testsuite/gas/elf/section17.l: Likewise.
* testsuite/gas/elf/section17.s: Likewise.
* testsuite/gas/i386/unique.d: Likewise.
* testsuite/gas/i386/unique.s: Likewise.
* testsuite/gas/i386/x86-64-unique.d: Likewise.
* testsuite/gas/i386/i386.exp: Run unique and x86-64-unique.

ld/

PR gas/25380
* testsuite/ld-i386/pr22001-1c.S: Use "unique,N" in .section
directives.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/pr21481b.S: Likewise.

Automatic date update in version.in

elf/section13.s: Replace @nobits with %nobits

* testsuite/gas/elf/section13.s: Replace @nobits with %nobits.

moxie: don't force big-endian mode

Automatic date update in version.in

Update release making documentation

Move pending obsolete targets onto the definitely obsolete list