libgpg-error: bump to version 1.28

Add upstream patch fixing arm/arm64 targets build failure.

Use the smaller bz2 compressed tarball.

Switch _SITE to https for better security and corporate firewall
compatibility.

Add license files hash.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

pkg-cmake: enable toolchain install staging phase

Really fix commit 6729050f3a49dba42d2d881d31dbefd6b82b8dad

That commit added a script to "toolchain" post install staging hooks.
This will only be executed if TOOLCHAIN_INSTALL_STAGING is set to YES.

Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: disable PAM in the config if linux-pam is not selected

Currently there is only logic to enable PAM when linux-pam is selected.
However, busybox will fail to build with PAM enabled if the linux-pam
package has not been built before. So we should forcibly disable PAM in
busybox in that case.

Normally this is not an issue since our default busybox config doesn't
have PAM enabled. However, if you enable linux-pam, then save the
busybox config to a custom configuration file, then disable linux-pam
again, and then do a "make clean; make", the build will fail. A more
practical situation where this can occur is when the same custom
busybox config is used in a Buildroot config with and without
linux-pam.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/eudev: don't forcibly link with -lrt

This was carried over from udev back when it were an separate package,
but was not even needed by eudev 1.3 when we introduced it back in 2014
(937a95449ec: eudev: new package).

Drop it now.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

brotli: disable unneeded check for C++ compiler

This adds a local patch, also submitted upstream, which modifies
CMakeLists.txt to avoid the check for the unneeded C++ compiler.

Fixes:
- http://autobuild.buildroot.net/results/68e05c634e62ba4b6f6eb8dc95eeb16faa58fd60

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libfcgi: Use SPDX license identifier

The fcgi license is covered by SPDX, the identifier however is not
obvious.

For details, see https://spdx.org/licenses/OML.html

[Peter: add spdx.org link]
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: fix build break in sdk target

After commit 6729050f3a49dba42d2d881d31dbefd6b82b8dad nothing creates
$(HOST_DIR)/share/buildroot anymore, causing sdk to fail with:

 /bin/bash: .../output/host/share/buildroot/sdk-location: No such file or directory

Add creation of that directory to the "sdk" build steps itself.

Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pymodbus: new package

Signed-off-by: Falco Hyfing <hyfinglists@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

safeclib: fix build without wchar and host-doxygen

Add a patch (sent upstream) to add a --disable-doc option

Fixes:
 - http://autobuild.buildroot.net/results/e597843f2bb528da01d1e617929c818613b56cec

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: fix detection of SSP support

GCC issues a warning message if -fstack-protector is passed but SSP is
not available, so in order to force the compilation to fail we must also
pass -Werror.

All external toolchains were verified. The only one whose configuration
incorrectly selected BR2_TOOLCHAIN_HAS_SSP was CodeSourcery NIOSII.

Fixes:
  http://autobuild.buildroot.net/results/ce8fe8ac9cf0db01ae15d476ea714ff176965cfb
  http://autobuild.buildroot.net/results/09ce8f05e28c0219f499ce55130e896cae0c8b45

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

setools: update to add sedta and seinfoflow

Update to add sedta and seinfoflow to setools

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-networkx: new package

Update to add python-networkx package to buildroot. While 2.1
is the latest version, the current version of setools does not
work with versions past 1.11.

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-decorator: update to add host package

Update to add host package for python decorator

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

sam-ba: fix sam-ba symbolic link

Following the removal of $(HOST_DIR)/usr, the symbolic link from
$(HOST_DIR)/bin/sam-ba/ to $(HOST_DIR)/opt/sam-ba/sam-ba was broken,
so we fix this.

In addition, sam-ba being prebuilt, it comes in two separates
binaries, one for x86 and the other for x86_64, so we take this into
account as well.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
[Thomas:
 - add spaces around = signs
 - rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libss7: propagate dependency from dahdi-tools

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

eudev: prevent udev init script nonexistent directory error

The following error occures in the udev init script because the kernel config
may optionally not include uevent_helper.

/etc/init.d/S10udev: line 47: can't create /proc/sys/kernel/hotplug: nonexistent directory

Work around this by not trying to access the destination if it's not available.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

strace: bump to version 4.21

Download site moved to strace.io. No upstream provided hashes.

Drop the musl specific autoconf seed values. These values are now
detected correctly.

Add --enable-mpers=check to fix configure on aarch64 that does not
support binaries for the compat personality.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: kill DEPENDENCIES_HOST_PREREQ

Now that DEPENDENCIES_HOST_PREREQ is no longer used anywhere, we can
kill it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic: handle host-fakedate as a regular dependency

This commit moves the host-fakedate dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper regular dependency handled by the
package infrastructure.

host-fakedate is added as dependency to all packages, except
host-skeleton, because we depend on it.

In addition, we make sure that host-fakedate does not grow a
dependency on host-{tar,xz,lzip,ccache} to avoid circular
dependencies. host-fakedate does not need any extraction tool and does
not need to build C/C++ code (the source code is just a shell script
available in Buildroot).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic: handle host-ccache as a regular dependency

This moves the host-ccache dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper package dependency. When
BR2_CCACHE=y, we add host-ccache as a regular dependency of all
packages except:

 - The extractor packages host-tar, host-xz and host-lzip

 - host-ccache itself

 - host-skeleton, because all packages depend on it

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic: handle host-lzip as an extract dependency

This moves the host-lzip dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.

To achieve that, check-host-lzip.mk fills in the
BR2_LZIP_HOST_DEPENDENCY with host-lzip if building a host-lzip is
needed. The name BR2_LZIP_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.

The BR2_LZIP_HOST_DEPENDENCY is added to all packages, except:

 - host-lzip, because we would otherwise depend on ourself.

 - host-tar, because lzip itself is delivered as a tarball, so we need
   to have host-lzip depend on host-tar, and not host-tar depend on
   host-lzip

 - host-skeleton, because we need to have host-lzip depend on
   host-skeleton, and not the opposite.

We also mutually exclude host-lzip and host-xz from dependending on
each other, to avoid a circular dependency.

In addition, we modify lzip.mk to explicitly build host-lzip without
ccache. We generally took the approach of building host-ccache *after*
all the extractors have been built.

[Peter: fix s/host-tar/host-lzip/ typo, fix s/xz/lzip/ typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic: handle host-xz as an extract dependency

This moves the host-xz dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.

To achieve that, check-host-xz.mk fills in the
BR2_XZ_HOST_DEPENDENCY with host-xz if building a host-xz is
needed. The name BR2_XZ_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.

The BR2_XZ_HOST_DEPENDENCY is added to all packages, except:

 - host-xz, because we would otherwise depend on ourself.

 - host-tar, because xz itself is delivered as a tarball, so we need
   to have host-xz depend on host-tar, and not host-tar depend on
   host-xz

 - host-skeleton, because we need to have host-xz depend on
   host-skeleton, and not the opposite.

In addition, we modify xz.mk to explicitly build host-xz without
ccache. We generally took the approach of building host-ccache *after*
all the extractors have been built.

[Peter: fix s/host-tar/host-xz/ typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic: handle host-tar as an extract dependency

This moves the host-tar dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.

To achieve that, check-host-tar.mk fills in the
BR2_TAR_HOST_DEPENDENCY variable with host-tar if building a host-tar
is needed. The name BR2_TAR_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.

The BR2_TAR_HOST_DEPENDENCY is added to all packages, except host-tar
itself (obviously) and host-skeleton, because we depend on
host-skeleton to install host-tar properly in HOST_DIR.

In addition, we modify tar.mk to explicitly build host-tar without
ccache: since ccache source code is available as a tarball, ccache
will obviously depend on host-tar if the system tar is insufficient.

Finally, to make things really clean, we also add
$(BR2_TAR_HOST_DEPENDENCY) to the dependencies of the tar filesystem
format, since it requires tar, so we'd better make sure we have a
suitable tar.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic: add the concept of extract dependency

Extract dependencies are dependencies that must be ready before the
extract step of a package, i.e for tools that are needed to extract
packages themselves. Current examples of such tools are host-tar,
host-lzip and host-xz.

They are currently handled through DEPENDENCIES_HOST_PREREQ. However,
this mechanism has a number of drawbacks:

 - First and foremost, because host-tar/host-lzip/host-xz are not
   listed in the dependencies of packages, the package infrastructure
   does not know it should rsync them in the context of per-package
   SDK.

 - Second, there is no dependency handling *between* them. I.e, we
   have no mechanism that says host-tar should be built before
   host-lzip, while it is in fact the case: if you need to build
   host-lzip, you need to extract a tarball, so you may need host-tar
   if your system tarball is not capable enough.

For those reasons, it makes sense to add explicit support for "extract
dependencies" in the package infrastructure, through the
<pkg>_EXTRACT_DEPENDENCIES variable. It is unlikely this variable will
ever be used by a package .mk file, but it will be used internally by
the package infrastructure.

[Peter: fix typo in manual]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-cmake: install CMake files as part of a package

Currently, the toolchainfile.cmake and Buildroot.cmake files are
installed outside of any package, just triggered by the toolchain
target.

As part of the per-package SDK effort, we are trying to avoid anything
that installs to the global $(HOST_DIR), and this is one of the
remaining files installed in $(HOST_DIR) outside of any package. We
fix this by installing such files as part of the toolchain package
post-install staging hooks.

Yes, a post-install staging hook to install things to $(HOST_DIR) is a
bit weird, but the toolchain infrastructure is made of target packages
only, and they all install a lot of stuff to $(HOST_DIR) already.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile, skeleton: move the host skeleton logic to host-skeleton package

As part of the per-package SDK work, we want to avoid having logic
that installs files to the global HOST_DIR, and instead do it inside
packages. One thing that gets installed to the global HOST_DIR is the
minimal "skeleton" that we create in host:

 - the "usr" symbolic link for backward compatibility

 - the "lib" directory, and its lib64 or lib32 symbolic links

This commit moves this logic to a new host-skeleton package, and makes
all packages (except itself) depend on it.

While at it, use $(Q) instead of @ in the HOST_SKELETON_INSTALL_CMDS.

[Peter: drop host-patchelf reference in commit message]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tools: fix compilation error due to uninitialized variable

Backport a patch alreary submitted upstream, at

  https://github.com/tpm2-software/tpm2-tools/pull/954

Fixes:
  http://autobuild.buildroot.net/results/ae1e151576b365380ab711a1b8ffcd92ad0050e2
  http://autobuild.buildroot.net/results/ee80c2fe54c89589532efd47eb93bd27637c690f

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9, 14, 15}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.15.13

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xfsprogs: fix build with older kernel headers

xfsprogs uses a local definition of struct fsxattr when the kernel
provided one in linux/fs.h is too old. The preprocessor trickery that
allows to include linux/fs.h without colliding with the local
definitions breaks when source files include linux/fs.h on their own.
Add a patch that removes these local includes.

Fixes:
http://autobuild.buildroot.net/results/3aa/3aad812582d94b76d204436d2879bfa732c34da6/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xwud: bump version to 1.0.5

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdata_xcursor-themes: bump version to 1.0.5

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdata_xbitmaps: bump version to 1.1.2

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xwininfo: bump version to 1.1.4

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xwd: bump version to 1.0.7

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xsm: bump version to 1.0.4

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xsetroot: bump version to 1.1.2

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xset: bump version to 1.2.4

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xrefresh: bump version to 1.0.6

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xrdb: bump version to 1.1.1

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xprop: bump version to 1.2.3

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xpr: bump version to 1.0.5

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xmessage: bump version to 1.0.5

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xlsfonts: bump version to 1.0.6

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xlsclients: bump version to 1.1.4

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xload: bump version to 1.1.3

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xkill: bump version to 1.0.5

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xinit: bump version to 1.4.0

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xfontsel: bump version to 1.0.6

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xeyes: bump version to 1.1.2

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xbacklight: bump version to 1.2.2

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_ico: bump version to 1.0.5

Added all upstream hashes, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qemu: add libssh2 optional dependency

Make sure that qemu uses libssh2 when libssh2 is enabled, for build
consistency.

Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libssh2: fix pkg-config info for mbedtls backend

The libssh2.pc file did not contain the needed info for static link with
libssh2. Add a patch fixing that.

Fixes (qemu):
http://autobuild.buildroot.net/results/634/6346b25be2844f9ef722e52040ac1b43d9c38899/

Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dovecot-pigeonhole: bump version to 0.4.23

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dovecot: bump version to 2.2.35

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdriver_xf86-input-libinput: bump version to 0.27.0

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qemu: fix build with glibc 2.27

glibc version 2.27 added a wrapper for the memfd_create system call. The
wrapper prototype collides with a static declaration of memfd_create.
Add upstream patch to correctly detect the glibc provided memfd_create
definition.

Fixes:
http://autobuild.buildroot.net/results/b82/b825c0cd397424b1fc7fa87c580e1757dc25c588/
http://autobuild.buildroot.net/results/9aa/9aa3853d23c0dc72bf3632b4d66ae39f597f5250/
http://autobuild.buildroot.net/results/b13/b13039ba602b9d500b939d259816a39ba24e1ba2/

Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/samba4: bump version to 4.8.0

Changelog: https://www.samba.org/samba/history/samba-4.8.0.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/freescale_p1025twr: needs host-openssl for the Linux kernel build

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/59015355

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/qemu_aarch64_virt: needs host-openssl for the Linux kernel build

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/59015465

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/enlightenment: bump to 0.22.3

https://www.enlightenment.org/news/e0.22.3_release

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/imxsabre: Fix U-Boot parallel build issue

Sometimes imximage throws the following error:

MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx6sxsabresd/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed

Later on, when running mkimage for the u-boot.imx it will succeed in
finding the IVT offset.

Looks like some race condition happening during parallel build when
processing mkimage for u-boot-dtb.imx and u-boot.imx.

A proper fix still needs to be implemented, but as a workaround let's
remove the error when the IVT offset is not found.

It is useful to have such message, especially during bring-up phase,
but the build error that it causes is severe, so better avoid the
build error for now.

The error checking can be re-implemented later when we have a proper
fix.

This workaround has already been applied in mainline U-Boot:
http://git.denx.de/?p=u-boot.git;a=commit;h=b5b0e4e351e20a606de22db6a56ad6bc1e2aa8fd

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/59015347

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/icu: bump version to 60.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/apache: security bump to version 2.4.33

Changelog: http://www.apache.org/dist/httpd/CHANGES_2.4.33

Fixes CVE-2017-15710, CVE-2018-1283, CVE-2018-1303, CVE-2018-1301,
CVE-2017-15715, CVE-2018-1312, CVE-2018-1302.

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/imagemagick: security bump version to 7.0.7-27

Fixes CVE-2018-6405 (upstream Github PR 964) and many others:
http://www.imagemagick.org/script/changelog.php

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

woff2: new package

Add the woff2 package to Builroot. This is needed by webkitgtk from
version 2.20.0 onwards. WebKitGTK+ used to bundle a copy of the library,
but it stopped doing so now that the upstream is has been making
releases.

[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

brotli: new package

Add the brotli package to Buildroot. This is needed by woff2, which in
turn is needed by webkitgtk from version 2.20.0 onwards. WebKitGTK+ used
to bundle a copy of the library, but it stopped doing so now that the
upstream has started making releases.

[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tss: fix build with musl

Add a missing <sys/select.h> inclusion, needed for the definition of the
fd_set type. This patch can't be sent upstream because the changed file
does not exist anymore on the master branch.

Fixes:
  http://autobuild.buildroot.net/results/09e8b3b85d7113d60e8967a2d41a6aea8f8197c0
  http://autobuild.buildroot.net/results/2e4c70f2f1239eb19235ae04a936a6492daf316d
  http://autobuild.buildroot.net/results/bbd68f52781da735e983b1260de5b804787374b1

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xfsprogs: fix build with libunistring

The latest xfsprogs bump to version 4.15.1 added an optional dependency
on libunistring. Make sure we build libunistring before xfsprogs.

xfsprogs also added -lunistring to its make dependency. This does not
work very well with cross compilation because make does not know about
sysroot. Add a patch to remove this dependency.

To make shared only link with libunistring work, we also need to extend
the -static-libtool-libs patch to cover xfs_scrub as well.

Fixes:
http://autobuild.buildroot.net/results/66e/66e425b00a06f928be0951ac4196190fe88b0f62/
http://autobuild.buildroot.net/results/1cd/1cde87d1daf3c6009220ff47512794cef6a2938f/
http://autobuild.buildroot.net/results/8ba/8ba4e94cfbb8a5cbb166423a671bdbcdf535f86b/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

efivar: bump version

Drop 0001-Use-z-muldefs-to-avoid-the-multiple-definitions-bug-.patch and
0003-Remove-some-extra-const-that-gcc-complains-about.patch as they are now
upstream.

The upstream repo moved to the 'rhboot' github project, so adjust upstream
URL in .mk and help text to match.

Drop dependency on !musl as it is now support since e04281e60cf0d
(makeguids: Ensure compatibility with other libcs).

Drop BINTARGETS workaround as this is fixed since 6c674283697 (Don't build
static by default).

Drop popt dependency as it is no longer needed since 1aec5e7891 (Replace
popt usage with getopt_long in efivar.c).

While we are at it, also add a hash for the license file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

efibootmgr: explicitly depend on host-pkgconf and popt

efibootmgr uses host-pkgconf and popt, so explicitly add them to
_DEPENDENCIES instead of relying on them getting pulled in by efivar.

[Peter: reword as suggested by Thomas]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

util-linux: bump to version 2.32

Leave both _VERSION_MAJOR and _VERSION to reduce churn. We are likely to
need _MAJOR on the next bump.

Drop ac_cv_header_sys_timex_h override; not needed with current
uClibc-ng.

Drop scanf_cv_type_modifier override; not used in configure script since
v2.21.

Drop upstream patch.

Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dnsmasq: bump to version 2.79

Drop upstream patches.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus: bump to version 1.12.6

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libostree: bump to version 2018.4

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tools: allow building without stack smashing protection (SSP)

Disable SSP if the toolchain does not support it. This must be done
explicitly because configure enables hardening by default but doesn't
contain a link test, so it doesn't detect when libssp is missing.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tools: propagate dependencies of selected packages

- C++ (tpm2-tss)
- MMU (dbus, libglib)
- threads (libglib)
- wchar (libglib -> gettext)

Fixes (libglib):
  http://autobuild.buildroot.net/results/786859fccc477de1519d85d8a180626bb8ebe062
  http://autobuild.buildroot.net/results/df6518f331c16b477c6e934914d0e56dc102c228

[Peter: add C++ dependency to config option]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-abrmd: allow building without stack smashing protection (SSP)

Disable SSP if the toolchain does not support it. This must be done
explicitly because configure.ac passes -fstack-protector-all to the
compiler but doesn't contain a link test, so it doesn't detect when
libssp is missing.

Fixes:
  http://autobuild.buildroot.net/results/83ad1f33f523321f841e70d2d8cf5ce861dee217
  http://autobuild.buildroot.net/results/cef047751534fef23d1022e9a276424bc84bf461
  http://autobuild.buildroot.net/results/6048355337804f7841dffa1655f44b9f6db56314
  http://autobuild.buildroot.net/results/d934a2ea90e7bf1c7b93dbb367998abab536daf4
  http://autobuild.buildroot.net/results/c0daaf37b8d1515d62d2441ba6aa57125437e191
  http://autobuild.buildroot.net/results/9482ea5554938865e0061dcbdcf3c2c918b96954
  http://autobuild.buildroot.net/results/282a8b6769f19f0a40089207bc54e7302663751f

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-abrmd: declare dependency on a toolchain with C++

It depends on tpm2-tss, whose current version contains C++ code.

[Peter: add dependency to config option]
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tss: allow building without stack smashing protection (SSP)

Disable SSP if the toolchain does not support it. This must be done
explicitly because configure.ac passes -fstack-protector-all to the
compiler but doesn't contain a link test, so it doesn't detect when
libssp is missing.

Fixes:
  http://autobuild.buildroot.net/results/f98749311c5a4338f5fbd6d29c9ca29ac6c24abd
  http://autobuild.buildroot.net/results/4112a001038eb5e04c67c7b5c79280813d196911
  http://autobuild.buildroot.net/results/451fcf7e36ea8774967b84279abb89ffb0fd6923
  http://autobuild.buildroot.net/results/8e1181836249105be28f04a59cf6d31afcea91d7
  http://autobuild.buildroot.net/results/49151df111ad3d03c70551e4516c3d3b36e12d70
  http://autobuild.buildroot.net/results/42d625c579a8a16fb0c0a3df441ea186c3d52b9a
  http://autobuild.buildroot.net/results/b0af881e080c4fcc6094489c037ee853fdf42869
  http://autobuild.buildroot.net/results/0909d94af3f9589dd6b8897e2501c05b421262c4
  http://autobuild.buildroot.net/results/2fd0ee29c0b28cb1fee1b43433ab8373f49ca397
  http://autobuild.buildroot.net/results/3fa19441fd2594b064c8ff759df8849705100a65
  http://autobuild.buildroot.net/results/8675d2aa8f1e8e568a42bc0dbfae8f3721e86796
  http://autobuild.buildroot.net/results/786de50b53fa9a325c92a5d48f3928082eff0045
  http://autobuild.buildroot.net/results/a575b340f7cc562c1b87eb31d4304131b52698a7
  http://autobuild.buildroot.net/results/0b1d50d9e266d889d7e848275ebfbce45ccb419d
  http://autobuild.buildroot.net/results/d632b0e1efbb5e133dfb6595554badea9e31c492
  http://autobuild.buildroot.net/results/0c95459bfa82048d7e99661cf5f2d6d393179090
  http://autobuild.buildroot.net/results/bd494dc69fb0da46065f10a3cd8a4cab0bcbcc9b
  http://autobuild.buildroot.net/results/b397e44cd17b3d576cc55f02d5463e9c14743907
  http://autobuild.buildroot.net/results/40ed7a3b519c18102df515b5c4b993ed9a488236
  http://autobuild.buildroot.net/results/e5fc04c2ded86e03eb174a89845a50f52e407d48
  http://autobuild.buildroot.net/results/95a7c14da225d9e42545ee7a155f461303c62aa6
  http://autobuild.buildroot.net/results/25ebda7a13afa4790ad28018f42c46a795f3c284
  http://autobuild.buildroot.net/results/1bc081b78c625f13327c733fc734e36fe28ecc2a
  http://autobuild.buildroot.net/results/273108e2798155464109b9fb4d16884e7d0f9ab3
  http://autobuild.buildroot.net/results/f677d340cd42ea7242d4102fbb5fa6091a05e8ef
  http://autobuild.buildroot.net/results/ae15b625260801b494bbfa541ef86edcdbaedfe0

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tss: declare dependency on a toolchain with C++

Version 1.4.0 still contains some C++ code. This has already changed on
upstream, so future versions will drop the dependency on a C++ compiler.

[Peter: fix indentation, add dependency to config option]
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

efibootmgr: bump version

Drop 0001-dont-use-fshort-wchar-when-building.patch and
0003-Remove-extra-const-keywords-gcc-7-gripes-about.patch as they are now
upstream.

The upstream repo moved to the 'rhboot' github project, so adjust upstream
URL in .mk and help text to match.

Version 15 introduces build time configuration of the default EFI directory
(E.G. the subdirectory in the EFI system partition where the loader is
installed).  This used to be hardcoded to redhat, but now a value must be
specified at build time.  Given that, it is unlikely that people relied on
the default value so set it to the more sensible 'buildroot'.

While we are at it, also add a hash for the license file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

flashrom: avoid download URL redirect

Use the https URL to avoid HTTP 308 redirect. Older wget releases treat
it as a hard error.

Fixes:
http://autobuild.buildroot.net/results/ee6/ee66e5ead70e73f1d2dae1c5ba31ccf054fe15a7/
http://autobuild.buildroot.net/results/fb8/fb8509bf9cf03933e45355fd9a6c3fa53d33c44f/
http://autobuild.buildroot.net/results/0e1/0e196570207e459c3440d50cecf0032eee6edfc2/

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libostree: bump to version 2018.3

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/{mesa3d, mesa3d-headers}: bump version to 17.3.7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.2.x and 4.{14, 15}.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.15.12

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

powerpc-utils: Update URL to new upstream

powerpc-utils changed upstream git repositories again.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tremor: security bump to fix CVE-2018-5146

Prevent out-of-bounds write in codebook decoding.

Codebooks that are not an exact divisor of the partition size are now
truncated to fit within the partition.

Upstream has migrated from subversion to git, so change to git and bump the
version to include the fix for CVE-2018-5146.

While we're at it, also add a hash file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd-mpc: pass PARALLEL_JOBS to NINJA_OPTS

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmpdclient: pass PARALLEL_JOBS to NINJA_OPTS

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: pass PARALLEL_JOBS to NINJA_OPTS

Ninja understands the `-j` option which defines how many jobs are
run in parallel.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

btrfs-progs: fix build with e2fsprogs 1.44.0

e2fsprogs 1.44.0 renamed a struct field name, breaking the build of code
using it. Add a patch suggested upstream to fix that.

Fixes:
http://autobuild.buildroot.net/results/d6b/d6b5fb377f44d0b6eef96c08e550ec7277a9e3cd/
http://autobuild.buildroot.net/results/651/651518f12b8a98d53cb5402445a476bd2bf32155/
http://autobuild.buildroot.net/results/3c7/3c771455cbc8460fffab6c4dd9835ee4a5776c19/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-firmware: add QCA6174 firmware legal notice files

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-firmware: add QCA6174 multi-board firmware

The board-2.bin file is a new format that support multiple board files.
This file is required for for recent QCA6174 modules.

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.2.x and 4.{1, 14, 15}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.15.11

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/htop: open files using binary mode

Imlement Arnout's suggestion [1] for MakeHeader script.

[1] http://lists.busybox.net/pipermail/buildroot/2018-February/214373.html

Fixes:
http://autobuild.buildroot.net/results/9ce/9ce2ef5ef694253b9759016c9702c5c6be7849a1

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>