Rob Clark [Fri, 27 Mar 2020 23:34:27 +0000 (16:34 -0700)]
gitlab-ci: disable vs2019 build
Seems to be broken atm and blocking merging anything.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Thu, 26 Mar 2020 17:45:54 +0000 (10:45 -0700)]
freedreno/ir3/ra: re-work a6xx merged register file conflicts
In particular setup the full/half conflicts first. This avoids spurious
conflicts that where causing RA to place vecN half-regs poorly.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Thu, 26 Mar 2020 17:25:04 +0000 (10:25 -0700)]
freedreno/ir3/ra: split building regs/classes and conflicts
Split out the construction of registers and classes (which is the same
on all gens) from setting up conflicts. Prep to re-work how we setup
conflicts on a6xx+ which merged half/full register file.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Mon, 23 Mar 2020 17:25:38 +0000 (10:25 -0700)]
freedreno/ir3/ra: pick higher numbered scalars in first pass
Since we are re-assigning the scalars anyways in the second pass, assign
them to the highest free reg in the first pass (rather than lowest) to
allow packing vecN regs as low as possible.
Note this required some changes specifically for tex instructions with a
single component writemask that is not necessarily .x, as previously
these would get assigned in the first RA pass, and since they are still
scalar, we'd end up w/ some r47.* and other similarly way-to-high
assignments after the 2nd pass.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Fri, 20 Mar 2020 16:14:36 +0000 (09:14 -0700)]
freedreno/ir3/ra: compute register target from liveranges
Using the output of the first pass isn't ideal, as it can bake in the
losses from fragmentation which the scalar pass is intended to fill in.
This gets worse when we start using "vectorish" instructions, due to
higher use of vecN values.
Instead, we can just use the outputs of the liveness analysis to get a
more accurate # of maximum live values at any point.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sun, 22 Mar 2020 19:37:12 +0000 (12:37 -0700)]
freedreno/ir3/ra: fix array liveranges
Fixes: 1b658533e11 ("freedreno/ir3: extend liverange of arrays")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 21:44:44 +0000 (14:44 -0700)]
freedreno/ir3/ra: add def/use iterators
Decouple the messy logic of figuring out vreg names defined/used by an
instruction from the logic of what to do about it by introducing
iterators. There is still *some* array vs ssa special casing in
ra_block_compute_live_ranges(), but less than before. And this will
avoid introducing a second copy of the def/use logic in a following
patch which uses the liveranges to calculate the maximum # of live
values (which is the optimal target for max physical register window
to round-robin within).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 20:29:37 +0000 (13:29 -0700)]
freedreno/ir3/ra: drop extending output live-ranges
This is no longer needed as we create meta:collect instructions in the
end block, which achieves the same result.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 18:25:36 +0000 (11:25 -0700)]
freedreno/ir3/ra: add helper to map name to array
For vreg names that refer to arrays rather than SSA values, this is the
counterpart to name_to_instr().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 18:07:35 +0000 (11:07 -0700)]
freedreno/ir3/ra: fix target register calculation
Account for the # of regs an instruction writes, and fix an off-by-one.
(We are about to replace this with calculating the register target using
the live-ranges, but in debugging that it was useful to assert() if it
chose a higher target.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Thu, 19 Mar 2020 23:29:57 +0000 (16:29 -0700)]
freedreno/ir3/ra: add helper to map name to instruction
Extract out a helper from the select_reg callback. And include all the
instructions in the hashtable, not just SFU. This will be useful in the
following commits.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 17:33:48 +0000 (10:33 -0700)]
freedreno/ir3/ra: split-up
Split out regset and shared header, since the RA pass is already getting
large-ish.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Mon, 23 Mar 2020 15:58:07 +0000 (08:58 -0700)]
freedreno/ir3/ra: add debug option for RA debug msgs
Similar to the debug switch for sched debug msgs
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Fri, 6 Mar 2020 16:46:43 +0000 (08:46 -0800)]
freedreno/ir3: convert debug bitfield to BITFIELD_BIT()
(Little more verbose than the kernel's BIT())
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Fri, 6 Mar 2020 16:43:35 +0000 (08:43 -0800)]
freedreno/ir3: reformat disasm output
In particular, make sure we see all the shader-db stats. The format
(order) is the sameish, except split across multiple lines to make it
easier to read.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 20:13:34 +0000 (13:13 -0700)]
freedreno/ir3: fix bogus register footprint with tess/gs
When we have a tess or gs stage, VS outputs aren't normal varyings, so
regid is r63.x.. we shouldn't extend our registerfootprint to 64!
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Thu, 12 Mar 2020 21:16:38 +0000 (14:16 -0700)]
freedreno/ir3: remove unused helper
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Fri, 20 Mar 2020 18:50:46 +0000 (11:50 -0700)]
freedreno/ir3: add bary_ij as src for meta:tex_prefetch
This way RA doesn't have to special case it in use/def accounting..
This gets rid of an extra level of split/collect, which shouldn't be
needed. And interferes with scheduler trying to put tex-prefetches
after inputs but before other instructions. (Otherwise it would have
to figure out which split/collects need to go before the tex-prefetch)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 18:06:59 +0000 (11:06 -0700)]
freedreno/ir3: small cleanup and comments
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 16:49:27 +0000 (09:49 -0700)]
freedreno/a6xx: register update
No functional change, and this register isn't used in userspace. Just
syncing from envytools tree to eliminate the delta.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Daniel Stone [Fri, 27 Mar 2020 21:20:11 +0000 (21:20 +0000)]
CI: Disable Panfrost Mali-T820 jobs
The BayLibre T820 runners appear to be unhealthy.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4359>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4359>
Marek Olšák [Thu, 26 Mar 2020 03:47:36 +0000 (23:47 -0400)]
util: remove duplicated MALLOC_STRUCT and CALLOC_STRUCT
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 03:44:59 +0000 (23:44 -0400)]
util: don't include p_defines.h and u_pointer.h from gallium
It's a mess, but this is what I arrived at.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 01:30:55 +0000 (21:30 -0400)]
radv: stop including files from mesa/main
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 01:26:24 +0000 (21:26 -0400)]
util: stop including files from mesa/main
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 01:13:48 +0000 (21:13 -0400)]
mesa: don't use <> for including internal headers
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 01:11:44 +0000 (21:11 -0400)]
Move compiler.h and imports.h/c from src/mesa/main into src/util
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Jesse Natalie [Tue, 17 Mar 2020 17:53:33 +0000 (10:53 -0700)]
wgl: use gldrv.h instead of stw_icd.h
Now that we have the official header, let's use that instead of
stw_icd.h.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4305>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4305>
Jesse Natalie [Tue, 17 Mar 2020 17:53:33 +0000 (10:53 -0700)]
wgl: add official gldrv.h header-file
This is the official, Microsoft-provided gldrv.h that describes the
driver-interface for OpenGL drivers on Windows.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4305>
Karol Herbst [Fri, 20 Sep 2019 18:27:20 +0000 (20:27 +0200)]
nv50, nvc0: fix must_check warning of util_dynarray_resize_bytes
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4330>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4330>
Erik Faye-Lund [Thu, 26 Mar 2020 10:50:10 +0000 (11:50 +0100)]
nv50: remove unused variable
This isn't used anymore, so let's get rid of it to silence a warning.
Fixes: c574cda3c6a ("util: Make helper functions for pack/unpacking pixel rows.")
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4330>
Lionel Landwerlin [Mon, 2 Mar 2020 12:00:55 +0000 (14:00 +0200)]
intel/perf: store the probed i915-perf version
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Lionel Landwerlin [Mon, 2 Mar 2020 11:52:49 +0000 (13:52 +0200)]
intel/perf: document meaning of query field
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Lionel Landwerlin [Wed, 4 Sep 2019 11:10:22 +0000 (14:10 +0300)]
intel/perf: move mdapi query definitions to their own file
Where they belong.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Lionel Landwerlin [Wed, 4 Sep 2019 10:52:13 +0000 (13:52 +0300)]
intel/perf: break GL query stuff away
This stuff is somewhat specific to the GL extension & drivers. On
Vulkan we won't use this, it also made a rather large file.
v2: Fix Android build (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Lionel Landwerlin [Wed, 13 Nov 2019 13:21:00 +0000 (15:21 +0200)]
intel/perf: move register definition to special file
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Andres Gomez [Sun, 8 Mar 2020 00:05:08 +0000 (02:05 +0200)]
gitlab-ci/traces: Add D3D11 sample entry for POLARIS10
v2:
- Updated traces-db commit.
- Changed the reference DXVK trace.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Fri, 20 Mar 2020 18:26:48 +0000 (20:26 +0200)]
gitlab-ci: add Wine and DXVK env variables to Vulkan's tracie runner
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Wed, 18 Mar 2020 14:39:49 +0000 (16:39 +0200)]
gitlab-ci: replay apitrace traces in headless mode
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Sun, 8 Mar 2020 21:40:04 +0000 (23:40 +0200)]
gitlab-ci: add apitrace's DXGI traces support
v2:
- Pass the whole retrace command for apitrace traces (Alexandros).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Sun, 8 Mar 2020 21:37:23 +0000 (23:37 +0200)]
gitlab-ci: add Wine, win64's apitrace and DXVK to the Vulkan testing container
In preparation for having automated testing with DXGI traces.
v2:
- Updated DXVK version.
- Merged the new Wine container into the existing Vulkan
one (Michel).
v3:
- Updated commit log.
- Use a particular known-good apitrace version (Alexandros).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Thu, 26 Mar 2020 21:00:15 +0000 (23:00 +0200)]
gitlab-ci: Don't use buster-backports packages by default for x86_test-vk
The backports repository can be temporarily inconsistent between
architectures, which can break the docker image build.
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Daniel Stone [Fri, 27 Mar 2020 13:22:37 +0000 (13:22 +0000)]
CI: Windows: Fix Docker tag argument inversion
docker tag takes its arguments as source and dest, not dest and source.
Went unnoticed as the host already had a tag for my image when I was
testing.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4346>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4346>
Daniel Stone [Tue, 24 Mar 2020 11:11:36 +0000 (11:11 +0000)]
CI: Add native Windows VS2019 build
Adds a native build of Mesa using Meson with the Visual Studio 2019
toolchain on a Windows host.
Though Docker is supported on Windows, Docker-in-Docker is not possible,
nor are podman and skopeo available. We handle this by creating the
container from a shell-executor Windows machine, which gives us a native
PowerShell that we can execute Docker from. This attempts to do the same
copy-from-upstream-or-create-if-not-exists optimisation as the
ci-templates do for our Linux builds, albeit open-coded in PowerShell.
The Mesa build itself is executed inside a container, using Meson and
Ninja.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Acked-by: Brian Paul <brianp@vmware.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Daniel Stone [Thu, 26 Mar 2020 13:01:58 +0000 (13:01 +0000)]
util/test: Use MAX_PATH on Windows
Windows provides MAX_PATH rather than PATH_MAX for the maximum allowable
path length. This is not a limit on the length of filename which can
exist on the filesystem, but a length on the length of path which can be
passed to Win32 API calls.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Fixes: f8f1413070a ("util/u_process: add util_get_process_exec_path")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Pierre-Eric Pelloux-Prayer [Thu, 26 Mar 2020 13:07:39 +0000 (14:07 +0100)]
util: fix process_test path
Make sure we only use winepath when needed.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Fixes: f8f1413070a ("util/u_process: add util_get_process_exec_path")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2690
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Tomeu Vizoso [Fri, 27 Mar 2020 08:25:17 +0000 (09:25 +0100)]
gitlab-ci: Disable jobs for Collabora's LAVA lab
The lab is going down for a few hours to upgrade the LAVA installation
to the latest stable release.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4342>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4342>
Timothy Arceri [Thu, 26 Mar 2020 01:23:23 +0000 (12:23 +1100)]
nir: fix packing of TCS varyings not read by the TES
Unlike other stages TCS outputs not read by the TES cannot always
be demoted to globals e.g. when they are read by other TCS
invocations.
We were not taking these outputs into account when packing which
could result in other outputs being assigned to the same location.
Here we make sure to gather information on these outputs and group
them together when packing.
This fixes rendering issues in QUBE 2 via Proton.
Closes: #2653
Fixes: 26aa460940f6 ("nir: rewrite varying component packing")
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4328>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4328>
Timothy Arceri [Thu, 26 Mar 2020 08:03:51 +0000 (19:03 +1100)]
glsl: fix varying packing for 64bit integers
Without this we can incorrectly end up marking things as making
use of ARB_enhanced_layouts style packing.
Cc: 19.3 20.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4328>
Samuel Pitoiset [Thu, 26 Mar 2020 10:40:35 +0000 (11:40 +0100)]
ac/nir: use llvm.amdgcn.rcp in ac_build_fdiv()
Instead of emitting 1.0 / x which includes a slow division that
LLVM doesn't always optimize even if the metadata is correctly set.
No pipeline-db changes with VEGA10/LLVM 9.
pipeline-db (VEGA10/LLVM 10):
Totals from affected shaders:
SGPRS: 6672 -> 6672 (0.00 %)
VGPRS: 6652 -> 6652 (0.00 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size: 561780 -> 561692 (-0.02 %) bytes
Max Waves: 1043 -> 1043 (0.00 %)
pipeline-db (VEGA10/LLVM 11 -
92744f62478):
Totals from affected shaders:
SGPRS: 84608 -> 83768 (-0.99 %)
VGPRS: 106768 -> 106636 (-0.12 %)
Spilled SGPRs: 1625 -> 1713 (5.42 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size:
10850936 ->
10726712 (-1.14 %) bytes
Max Waves: 3152 -> 3180 (0.89 %)
LLVM 11 (master) is more affected than previous versions, but
based on the small impact with LLVM 9/10, I decided to emit it
unconditionally.
Cc: 20.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4326>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4326>
Samuel Pitoiset [Wed, 25 Mar 2020 17:17:38 +0000 (18:17 +0100)]
ac/nir: use llvm.amdgcn.rsq for nir_op_frsq
Instead of emitting 1.0 / sqrt(x) which includes a slow division that
LLVM doesn't always optimize even if the metadata is correctly set.
pipeline-db (VEGA10/LLVM 9):
Totals from affected shaders:
SGPRS: 16872 -> 16864 (-0.05 %)
VGPRS: 15320 -> 15464 (0.94 %)
Spilled SGPRs: 2021 -> 2133 (5.54 %)
Code Size:
1915464 ->
1917476 (0.11 %) bytes
Max Waves: 641 -> 639 (-0.31 %)
pipeline-db (VEGA10/LLVM 10):
Totals from affected shaders:
SGPRS: 43936 -> 44120 (0.42 %)
VGPRS: 41776 -> 41972 (0.47 %)
Spilled SGPRs: 875 -> 875 (0.00 %)
Code Size:
4468164 ->
4468120 (-0.00 %) bytes
Max Waves: 2412 -> 2414 (0.08 %)
pipeline-db (VEGA10/LLVM 11 -
92744f62478):
Totals from affected shaders:
SGPRS: 60096 -> 60096 (0.00 %)
VGPRS: 63552 -> 63648 (0.15 %)
Spilled SGPRs: 6135 -> 6117 (-0.29 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size:
6252996 ->
6249772 (-0.05 %) bytes
Max Waves: 2324 -> 2337 (0.56 %)
LLVM 11 (master) is more affected than previous versions, but
based on the small impact with LLVM 9/10, I decided to emit it
unconditionally.
Cc: 20.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4326>
Samuel Pitoiset [Wed, 25 Mar 2020 17:17:06 +0000 (18:17 +0100)]
ac/nir: use llvm.amdgcn.rcp for nir_op_frcp
Instead of emitting 1.0 / x which includes a slow division that
LLVM doesn't always optimize even if the metadata is correctly set.
pipeline-db (VEG10/LLVM 9):
Totals from affected shaders:
SGPRS: 50384 -> 50312 (-0.14 %)
VGPRS: 42572 -> 42696 (0.29 %)
Spilled SGPRs: 1372 -> 1372 (0.00 %)
Code Size:
5692040 ->
5691428 (-0.01 %) bytes
Max Waves: 3954 -> 3951 (-0.08 %)
pipeline-db (VEG10/LLVM 10):
Totals from affected shaders:
SGPRS: 78512 -> 78464 (-0.06 %)
VGPRS: 62408 -> 62484 (0.12 %)
Spilled SGPRs: 1502 -> 1502 (0.00 %)
Code Size:
8106188 ->
8103372 (-0.03 %) bytes
Max Waves: 7759 -> 7753 (-0.08 %)
pipeline-db (VEGA10/LLVM 11 -
92744f62478):
Totals from affected shaders:
SGPRS: 112760 -> 113232 (0.42 %)
VGPRS: 111132 -> 110568 (-0.51 %)
Spilled SGPRs: 5870 -> 5940 (1.19 %)
Spilled VGPRs: 650 -> 652 (0.31 %)
Code Size:
11887232 ->
11561744 (-2.74 %) bytes
Max Waves: 8964 -> 9015 (0.57 %)
LLVM 11 (master) is more affected than previous versions, but
based on the small impact with LLVM 9/10, I decided to emit it
unconditionally.
Cc: 20.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4326>
H.J. Lu [Tue, 18 Feb 2020 22:05:39 +0000 (14:05 -0800)]
x86: Add ENDBR at function entries
Intel Control-flow Enforcement Technology (CET):
https://software.intel.com/en-us/articles/intel-sdm
contains shadow stack (SHSTK) and indirect branch tracking (IBT).
When IBT is enabled, all indirect branch targets must start with
ENDBR instruction which is a NOP on non-CET processors.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2538
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3865>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3865>
Marek Olšák [Thu, 26 Mar 2020 04:30:53 +0000 (00:30 -0400)]
mesa: try to fix the android build
Fixes: 8a3e2cd9b26
Closes: #2685
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4325>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4325>
Francisco Jerez [Thu, 19 Mar 2020 20:08:56 +0000 (13:08 -0700)]
intel/fs/gen12: Fix interaction of SWSB dependency combination with EU fusion workaround.
This has been reported to fix a hang in Shadow of Mordor on Gen12.
One of its compute shaders seems to cause an in-order exec_all
dependency to be merged into an out-of-order SET dependency slot,
which would prevent us from baking the SET dependency into the parent
instruction, leading to an assert failure in emit_inst_dependencies()
(Thanks to Rafael for noticing that). Prevent that by avoiding
combination of in-order dependencies whenever that would cause a SET
dependency to be demoted to a SYNC.NOP instruction.
Fixes: e14529ff3262a527 "intel/fs/gen12: Workaround data coherency issues due to broken NoMask control flow."
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
H.J. Lu [Thu, 27 Feb 2020 17:18:37 +0000 (09:18 -0800)]
x86_init_func_common: Add ENDBR at function entry
Intel Control-flow Enforcement Technology (CET):
https://software.intel.com/en-us/articles/intel-sdm
when IBT is enabled, all indirect branch targets must start with ENDBR
instruction which is a NOP on non-CET processors.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2575
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3985>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3985>
Danylo Piliaiev [Thu, 26 Mar 2020 12:07:46 +0000 (14:07 +0200)]
intel/aub_viewer: Fix format specifier for uint64_t
Use PRIx64 instead of lx for uint64_t
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2692
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4331>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4331>
Icecream95 [Wed, 25 Mar 2020 08:05:16 +0000 (21:05 +1300)]
panfrost: Extend the tiled store fast-path to loads
The access functions are forced to be inline, so performance shouldn't
be impacted for stores.
WebGL performance in Firefox is more than doubled, and track loading
in STK is noticeably faster.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4317>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4317>
Icecream95 [Wed, 25 Mar 2020 07:01:08 +0000 (20:01 +1300)]
mesa/format_utils: Add a fast-path for RGBA to BGRA
This is similar to an existing fast-path, but this is for an array
source while the existing one is for an array destination.
Firefox can hit this case for WebGL when GL compositing is not used.
For a WebGL sample on the Panfrost driver, the frame-rate increased
from 19.4 fps to 20.6 fps, which is a 6% gain.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4315>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4315>
Tapani Pälli [Sat, 14 Mar 2020 06:57:02 +0000 (08:57 +0200)]
glsl: set error_emitted true if type not ok for assignment
Patch changes also existing assert to not trigger when we have
error types in assignment.
v2: simplify, cleanup (Ian)
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2629
Fixes: d1fa69ed61d ("glsl: do not attempt assignment if operand type not parsed correctly")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4178>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4178>
Alexandros Frantzis [Tue, 24 Mar 2020 14:34:05 +0000 (16:34 +0200)]
gitlab-ci: Fix traces caching in tracie
We are currently comparing a hex string representation of the git lfs
OID with a byte array representation of the locally calculated OID,
causing detection of valid cached traces to fail. Ensure we are
comparing compatible representations (in this case hex strings).
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4300>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4300>
Boris Brezillon [Tue, 17 Mar 2020 13:38:44 +0000 (13:38 +0000)]
vtn/opencl: add rint-support
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4318>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4318>
Erik Faye-Lund [Wed, 25 Mar 2020 20:19:01 +0000 (21:19 +0100)]
vtn/opencl: add native exp2/log2-support
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4318>
Erik Faye-Lund [Fri, 13 Mar 2020 11:36:19 +0000 (12:36 +0100)]
vtn/opencl: add native exp10/log10-support
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4318>
Erik Faye-Lund [Fri, 13 Mar 2020 10:57:52 +0000 (11:57 +0100)]
vtn/opencl: add native exp/log-support
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4318>
Erik Faye-Lund [Thu, 12 Mar 2020 14:58:04 +0000 (15:58 +0100)]
compiler/nir: move build_log helper into builtin-builder
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4318>
Erik Faye-Lund [Thu, 12 Mar 2020 14:00:37 +0000 (15:00 +0100)]
compiler/nir: move build_exp helper into builtin-builder
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4318>
Erik Faye-Lund [Tue, 10 Mar 2020 17:19:15 +0000 (18:19 +0100)]
vtn/opencl: fully enable OpenCLstd_Clz
Fixes: 7325f6ac987 ("vtn/opencl: add clz support")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4318>
Neil Armstrong [Wed, 25 Mar 2020 16:06:18 +0000 (17:06 +0100)]
gitlab-ci: re-enable mali400/450 and t820 jobs
The FILES_HOST_NAME and FILES_HOST_URL are in the baylibre's runner
environment to make it more flexible.
Also use the new aarch64 mesa-ci-aarch64-lava-baylibre runner with
embedded nginx server to serve the LAVA artifacts.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
Neil Armstrong [Wed, 25 Mar 2020 16:05:46 +0000 (17:05 +0100)]
gitlab-ci: add FILES_HOST_URL and move FILES_HOST_NAME into jobs
The FILES_HOST_URL & FILES_HOST_NAME will be in the Baylibre's runner
environment, move them into the t860/t720/t760 jobs using Collabora's
runner.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
Tomeu Vizoso [Tue, 24 Mar 2020 11:58:43 +0000 (12:58 +0100)]
gitlab-ci: Serve files for LAVA via separate service
Currently, we store the kernel and ramdisk for each LAVA job in the
artifacts of the job that built them. Because artifacts are stored in
GCE and LAVA labs aren't, this causes a lot of egress with is expensive.
To avoid this, have runners download most of the data via the (cached)
container images once, and for each job upload the kernel and ramdisk to
a server outside GCE.
Right now we only have Collabora's runner with a local web server, so
jobs that go to Baylibre's lab have been disabled.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
Tomeu Vizoso [Tue, 24 Mar 2020 11:58:30 +0000 (12:58 +0100)]
gitlab-ci: Place files from the Mesa repo into the build tarball
There's some files from the .gitlab-ci directory that are needed in the
test stage and that, because the Mesa repository isn't checked out in
that stage, need to be made available through other means.
Because those files are going to be needed in LAVA devices, place them
ino the tarball containing the built files so it's available to both
gitlab-ci runners and LAVA devices.
Before those files were passed in the artifacts of the Gitlab CI job,
but this commit places them into the built tarball so scripts later in
the pipeline don't need to account for this discrepancy.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
Marek Olšák [Mon, 23 Mar 2020 18:50:53 +0000 (14:50 -0400)]
radeonsi: enable full out-of-order drawing when allow_draw_out_of_order is set
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4152>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4152>
Marek Olšák [Thu, 30 Jan 2020 23:56:22 +0000 (18:56 -0500)]
mesa: allow out-of-order drawing to optimize immediate mode if it's safe
This increases performance by 11-13% in Viewperf11/Catia - first scene.
Set allow_draw_out_of_order=true to enable this.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4152>
Marek Olšák [Wed, 11 Mar 2020 03:33:46 +0000 (23:33 -0400)]
glsl_to_tgsi: set shader_info::writes_memory
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4152>
Marek Olšák [Wed, 11 Mar 2020 03:27:35 +0000 (23:27 -0400)]
nir: add and gather shader_info::writes_memory
for out-of-order drawing.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4152>
Kristian H. Kristensen [Wed, 25 Mar 2020 17:06:32 +0000 (10:06 -0700)]
radeonsi: Stop exposing PIPE_SHADER_CAP_FP16
Not fully supported.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4321>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4321>
Vinson Lee [Tue, 24 Mar 2020 22:20:36 +0000 (15:20 -0700)]
util/u_process: Add util_get_process_exec_path for macOS.
Fixes: f8f1413070ae ("util/u_process: add util_get_process_exec_path")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2682
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4313>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4313>
Christian Gmeiner [Fri, 13 Sep 2019 06:33:38 +0000 (08:33 +0200)]
freedreno: ssbo: mark resource read or written depending on usage
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1963>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1963>
Christian Gmeiner [Fri, 13 Sep 2019 06:24:33 +0000 (08:24 +0200)]
freedreno: ssbo: keep track if a buffer gets written
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1963>
Christian Gmeiner [Fri, 13 Sep 2019 06:20:46 +0000 (08:20 +0200)]
freedreno: simplify fd_set_shader_buffers(..)
Clear the modified bits for enabled_mask and then iterate over the
whole range and set the specific bit where there is a buffer.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1963>
Christian Gmeiner [Fri, 13 Sep 2019 06:09:24 +0000 (08:09 +0200)]
freedreno: calculate modified bit mask only once
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1963>
Roland Scheidegger [Tue, 24 Mar 2020 18:54:06 +0000 (19:54 +0100)]
gallium/util: Add back (and rename) util_float_to_half implementation
This implementation was removed by
8b8af6d3 ("gallium/util: Switch
util_float_to_half to _mesa_float_to_half()'s impl.")
It was not actually broken, but _mesa_float_to_half() implements
round-to-nearest-even, whereas util_float_to_half() implemented
round-to-zero. So rename it appropriately.
GL actually never cares about rounding (except a broken piglit test),
however d3d10 very much does and requires RTZ for float to half
conversion. Moreover, apparently at least radeon gpus actually always
do RTZ when doing RT writes (and I'd suspect for shader image writes
as well). Hence it seems appropriate to hook up this rtz function to
the format instead. This will cause llvmpipe and softpipe to use rtz
rounding for clears with half float formats, and softpipe would use rtz
behavior for rt writes as well (llvmpipe has that hardcoded), not sure
if "real" hw drivers hit this function for much.
(For shader opcodes would still need to figure out what rounding to use
appropriately, but this is a question for another day.)
Note should probably unify with _mesa_float_to_float16_rtz. Unclear at
this point which one is better, so just restore previous function here.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4312>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4312>
Marek Vasut [Sun, 22 Mar 2020 02:48:05 +0000 (03:48 +0100)]
etnaviv: Emit PE.ALPHA_COLOR_EXT* on GPUs with half-float support
At least GC880 (iMX6S), GC2000 (iMX6Q) blobs do not emit the
PE.ALPHA_COLOR_EXT0 and PE.ALPHA_COLOR_EXT1 into the command
stream. The GCnano (STM32MP1) is not affected by this change
either. This is because neither of these GPUs support the
half-float feature.
Emit PE.ALPHA_COLOR_EXT* in etnaviv only if half-float support
is present in the GPU. This fixes all of the currently failing
dEQPs in this group:
dEQP-GLES2.functional.fragment_ops.blend.*
Fixes: 76adf041f25 ("etnaviv: fix blend color on newer GPUs")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4277>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4277>
Roland Scheidegger [Tue, 24 Mar 2020 20:56:40 +0000 (21:56 +0100)]
gallivm: disable rgtc/latc SNORM accellerated fetches
Unfortunately this appears to be bugged (it seems the piglit tests aren't
quite exhaustive enough). I'm almost certain it's the lerp
(lp_build_lerpdxta()) which doesn't handle signed numbers correctly, let's
disable for now.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4311>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4311>
Erik Faye-Lund [Tue, 24 Mar 2020 10:04:39 +0000 (11:04 +0100)]
rbug: do not return void-value
Returning a void-value is nonsensical, and in this case it seems like a
mistake.
This eliminates a warning when building on MSVC.
Fixes: fb04e5da97d ("gallium: add pipe_screen::finalize_nir")
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4297>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4297>
Erik Faye-Lund [Tue, 24 Mar 2020 10:03:03 +0000 (11:03 +0100)]
rbug: clean up cast-warnings
Similarly to the previous cast; on 64-bit Windows, unsigned long is
32-bit, and casting a pointer to a non-matchin bit-width integer produce
warnings. So let's use uintpre_t for this purpose instead.
Reviewed-by: Brian Paul <brianp@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4297>
Erik Faye-Lund [Tue, 24 Mar 2020 09:58:14 +0000 (10:58 +0100)]
pipebuffer: clean up cast-warnings
This code produces warnings, so let's fix that. The problem is that
casting a pointer to an integer of non-pointer-size triggers warnings on
MSVC, and on 64-bit Windows unsigned long is 32-bit large.
So let's instead use uintptr_t, which is exactly for these kinds of
things.
While we're at it, let's make the resulting index a plain "unsigned",
which is the type this originated from before we started with this
cast-dance.
Fixes: 1a66ead1c75 ("pipebuffer, winsys/svga: Add functionality to update pb_validate_entry flags")
Reviewed-by: Brian Paul <brianp@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4297>
Lionel Landwerlin [Thu, 20 Feb 2020 12:29:22 +0000 (14:29 +0200)]
vulkan/overlay: Add a workaround semaphore for application presenting without one
When an application calls vkQueuePresent() on a different queue than
the one we run our drawing on and it doesn't give a semaphore to wait
on, let's insert our own semaphore so that we don't race the
application's drawing.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2540
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3893>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3893>
Pierre-Eric Pelloux-Prayer [Tue, 24 Mar 2020 15:32:11 +0000 (16:32 +0100)]
ac: fix ac_build_is_helper_invocation when postponed_kill is null
If there was no demote() in the shader, ac_build_is_helper_invocation
behaves exactly the same as ac_build_load_helper_invocation, i.e.
the helper lanes are the same as they were at the beginning of the shader.
Fixes: de57ea2a3da ("amd/llvm: implement nir_intrinsic_demote(_if) and nir_intrinsic_is_helper_invocation")
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4301>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4301>
Pierre-Eric Pelloux-Prayer [Tue, 24 Mar 2020 14:58:59 +0000 (15:58 +0100)]
nir: update uses_demote flag in discard_to_demote pass
Otherwise the ctx.ac.postponed_kill will not be allocated.
Fixes: ce87da71e93 ("nir: add pass to lower discard() to demote()")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2662
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4301>
Neil Roberts [Mon, 18 Nov 2019 16:05:54 +0000 (17:05 +0100)]
glsl/lower_precision: Lower builtins depending on arguments
When an ir_call is encountered that invokes a builtin, it will now try
to generate a lowered version of the builtin. This only happens if all
of the arguments to the function are lowerable. Previously the builtin
would be inlined before the lowering pass is invoked and then the
implementation would be lowered as a consequence of the pass. However
this causes problems if the builtin has multiple arguments and the
implementation has operations on only a few of the arguments before
combining it with the others. In that case the entire builtin should
only be lowered if all of the arguments are lower precision. The
previous approach would end up lowering only parts of the
implementation.
The lowered implementations are cached in a hash table in case they can
be reused.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
Neil Roberts [Tue, 15 Oct 2019 14:20:26 +0000 (16:20 +0200)]
glsl: Inline builtins in a separate pass
Previously, the ir_call functions for builtin functions were replaced
with the inline implementation immediately after being added to the
instruction list. This patch replaces that with a separate pass that
lowers them after the conversion from AST to IR is complete. This will
be useful to be able to insert some handling for the precision lowering
pass before the inlining. This needs to happen because the precision
of the operations in the inlined implementation depends on the highest
precision of all of the arguments to the call.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
Hyunjun Ko [Tue, 19 Nov 2019 07:20:10 +0000 (07:20 +0000)]
freedreno/ir3: enable nir_opt_loop_unroll on a6xx
If precision lowering happens at GLSL IR, loop_analysis at IR doesn't
work as expected since it can't handle things like:
"(expression bool < (expression float16_t f2fmp (var_ref ndx) ) (constant float16_t (1.000000)) )"
So we'd rather do this optimization at the NIR stage.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
Neil Roberts [Thu, 31 Jan 2019 15:19:36 +0000 (16:19 +0100)]
freedreno/ir3: Lower bools to bitsize
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
Iago Toral Quiroga [Wed, 24 Oct 2018 07:25:29 +0000 (09:25 +0200)]
nir: add a bool bitsize lowering pass
The pass lowers 1-bit booleans produced by NIR to the native bitsize
of the operations that produce them.
v2: change on lower_load_const_instr after upstream changes. Added
TODO2 to explain it, as it was not properly tested yet (see
already existing TODO) (Neil)
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
Hyunjun Ko [Fri, 7 Jun 2019 08:48:34 +0000 (08:48 +0000)]
freedreno: Enable mediump lowering
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
Neil Roberts [Fri, 4 Oct 2019 09:13:21 +0000 (05:13 -0400)]
glsl: Add unit tests for the lower_precision pass
Adds a unit tests script that invokes the standalone compiler with
--lower-precision and verifies that lowered operations are being used.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
Neil Roberts [Thu, 3 Oct 2019 23:59:10 +0000 (19:59 -0400)]
glsl/standalone: Add an option to lower the precision
Adds a --lower-precision option that just sets the LowerPrecision
compiler option. That way it can be used in unit tests to test the
precision lowering pass.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
Neil Roberts [Fri, 19 Apr 2019 13:36:58 +0000 (15:36 +0200)]
glsl: Add an IR lowering pass to convert mediump operations to 16-bit
This works by finding the first rvalue that it can lower using an
ir_rvalue_visitor. In that case it adds a conversion to float16
after each rvalue and a conversion back to float before storing
the assignment.
Also it uses a set to keep track of rvalues that have been
lowred already. The handle_rvalue method of the rvalue visitor doesn’t
provide any way to stop iteration. If we handle a value in
find_precision_visitor we want to be able to stop it from descending into
the lowered rvalue again.
Additionally this pass disallows converting nodes containing non-float.
The can_lower_rvalue function explicitly excludes any branches
that have non-float types except bools. This avoids the need to have
special handling for functions that convert to int or double.
Co-authored-by: Hyunjun Ko <zzoon@igalia.com>
v2. Adds lowering for texture samples
v3. Instead of checking whether each node can be lowered while walking the
tree, a separate tree walk is now done to check all of the nodes in a
single pass. The lowerable nodes are added to a set which is checked
during find_precision_visitor instead of calling can_lower_rvalue.
v4. Move the special case for temporaries to find_lowerable_rvalues. This
needs to be handled while checking for lowerable rvalues so that any
later dereferences of the variable will see the right precision.
v5. Add an override to visit ir_call instructions and apply the same
technique to override the precision of the temporary variable in the
same way as done for builtin temporaries and ir_assignment calls.
v6. Changes the pass so that it doesn’t need to lower an entire subtree in
order do perform a lowering. Instead, certain instructions can be
marked as being indepedent of their child instructions. For example,
this is the case with array dereferences. The precision of the array
index doesn’t have any bearing on whether things using the result of
the array deref can be lowered.
Now, only toplevel lowerable nodes are added to the lowerable_rvalues
instead instead of additionally adding all of the subnodes.
It now also only needs one hash table instead of two.
v7. Don’t try to lower sampler types. Instead, the sample instruction is
now treated as an independent point where the result of the sample can
be used in a lowered section. The precision of the sampler type
determines the precision of the sample instruction. This also means
the coordinates to the sampler can be lowered.
v8. Use f2fmp instead of f2f16.
v9. Disable lowering derivatives calcualtions, which might not work
properly on some hw backends.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
projects / mesa.git / log