Pedro Alves [Tue, 4 Apr 2017 19:03:26 +0000 (20:03 +0100)]
dwarf2read.c: C++fy lnp_state_machine
While I was looking at the file, I noticed that this struct could be
nicely converted to a class. As I was progressing, I ended up moving
all state machine actual internal state manipulation to methods of
lnp_state_machine, essentially decoupling DWARF parsing from state
tracking. I also noticed that the lnp_reader_state doesn't really
serve any good use, so that's eliminated in the process.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* dwarf2read.c (lnp_state_machine): Now a class. Initialize all
data fields, make them private and add "m_" prefixes.
(lnp_state_machine::lnp_state_machine): New ctor.
(record_line, check_line_address, handle_set_discriminator)
(handle_set_address, handle_advance_pc, handle_special_opcode)
(handle_advance_line, handle_set_file, handle_negate_stmt)
(handle_const_add_pc, handle_fixed_advance_pc, handle_copy)
(end_sequence, advance_line): New methods.
(m_gdbarch, m_record_lines_p): New fields.
(lnp_reader_state): Delete.
(dwarf_record_line): Rename to ...
(lnp_state_machine::record_line): ... adjust.
(init_lnp_state_machine): Delete.
(lnp_state_machine::lnp_state_machine): New.
(check_line_address): Rename to ...
(lnp_state_machine::check_line_address): This.
(dwarf_decode_lines_1): Remove reference to "reader_state".
Adjust lnp_state_machine having a non-default ctor. Use bool.
State machine internal state manipulation moved to
lnp_state_machine methods.
Pedro Alves [Tue, 4 Apr 2017 19:03:26 +0000 (20:03 +0100)]
Make sect_offset and cu_offset strong typedefs instead of structs
A while ago, back when GDB was a C program, the sect_offset and
cu_offset types were made structs in order to prevent incorrect mixing
of those offsets. Now that we require C++11, we can make them
integers again, while keeping the safety, by exploiting "enum class".
We can add a bit more safety, even, by defining operators that the
types _should_ support, helping making the suspicious uses stand out
more.
Getting at the underlying type is done with the new to_underlying
function added by the previous patch, which also helps better spot
where do we need to step out of the safety net. Mostly, that's around
parsing the DWARF, and when we print the offset for complaint/debug
purposes. But there are other occasional uses.
Since we have to define the sect_offset/cu_offset types in a header
anyway, I went ahead and generalized/library-fied the idea of "offset"
types, making it trivial to add more such types if we find a use. See
common/offset-type.h and the DEFINE_OFFSET_TYPE macro.
I needed a couple generaly-useful preprocessor bits (e.g., yet another
CONCAT implementation), so I started a new common/preprocessor.h file.
I included units tests covering the "offset" types API. These are
mostly compile-time tests, using SFINAE to check that expressions that
shouldn't compile (e.g., comparing unrelated offset types) really are
invalid and would fail to compile. This same idea appeared in my
pending enum-flags revamp from a few months ago (though this version
is a bit further modernized compared to what I had posted), and I plan
on reusing the "check valid expression" bits added here in that
series, so I went ahead and defined the CHECK_VALID_EXPR macro in its
own header -- common/valid-expr.h. I think that's nicer regardless.
I was borderline between calling the new types "offset" types, or
"index" types, BTW. I stuck with "offset" simply because that's what
we're already calling them, mostly.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/offset-type-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add offset-type-selftests.o.
* common/offset-type.h: New file.
* common/preprocessor.h: New file.
* common/traits.h: New file.
* common/valid-expr.h: New file.
* dwarf2expr.c: Include "common/underlying.h". Adjust to use
sect_offset and cu_offset strong typedefs throughout.
* dwarf2expr.h: Adjust to use sect_offset and cu_offset strong
typedefs throughout.
* dwarf2loc.c: Include "common/underlying.h". Adjust to use
sect_offset and cu_offset strong typedefs throughout.
* dwarf2read.c: Adjust to use sect_offset and cu_offset strong
typedefs throughout.
* gdbtypes.h: Include "common/offset-type.h".
(cu_offset): Now an offset type (strong typedef) instead of a
struct.
(sect_offset): Likewise.
(union call_site_parameter_u): Rename "param_offset" field to
"param_cu_off".
* unittests/offset-type-selftests.c: New file.
Pedro Alves [Tue, 4 Apr 2017 19:03:25 +0000 (20:03 +0100)]
dwarf2read.c: Make dir_index and file_name_index strong typedefs
This should help catch mistakes related to mixing the 1-based DWARF
indexes with 0-based std::vector indexes, since the new types do not
implicitly convert to anything.
The change in read_formatted_entries relates to the fact that doing
the seemingly simpler:
- uintp = &fe.dir_index;
+ uintp = (unsigned int *) &fe.dir_index;
would be undefined C/C++. So to address that, I made the function
extract the form before assigning to the file_entry. It felt natural
to use gdb::optional for "do I have this value", and this is what
motivated the previous patch that added the missing observer methods
to gdb::optional.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* common/underlying.h: New file.
* dwarf2read.c: Include "common/gdb_optional.h" and
"common/underlying.h".
(dir_index, file_name_index): New types.
(file_entry): Use them.
(file_entry::include): Use to_underlying.
(line_header::add_file_name): Use dir_index.
(read_formatted_entries): Use gdb::optional. Read form before
writting to file_entry.
(dwarf_decode_line_header): Use dir_index.
(lnp_state_machine::current_file): Use to_underlying.
(lnp_state_machine::file): Change type to file_name_index.
(dwarf_record_line): Use to_underlying.
(init_lnp_state_machine): Use file_name_index.
(dwarf_decode_lines_1): Use dir_index and file_name_index.
Pedro Alves [Tue, 4 Apr 2017 19:03:25 +0000 (20:03 +0100)]
gdb::optional: Add observers
Currently, gdb::optional is really minimal and can only be used for
lazy initialization. There's no way to get at the value contained
inside the optinal. This commit corrects that, by adding observer
methods, mostly copied from libstdc++'s implementation of C++17
std::optional.
This will be used in the following patch.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* common/gdb_optional.h (gdb::optiona): Add operator->, operator*,
operator bool, has_value and get methods.
Pedro Alves [Tue, 4 Apr 2017 19:03:25 +0000 (20:03 +0100)]
dwarf2read.c: Some C++fycation, use std::vector, std::unique_ptr
This starts off as replacing a couple custom open coded vector
implementations in the file with std::vector, and then the rest falls
off of that. I.e., use new/delete instead of XCNEW/xfree, add
ctors/dtors/initializers where appropriate. And then use
std::unique_ptr instead of cleanups. Some functions became methods,
and in a couple spots, some single-use callback functions that would
have to be tweaked anyway are converted to lambdas instead.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* dwarf2read.c (struct file_entry): Add ctors, and initialize all
fields.
(line_header): Initialize all data fields. Change type of
standard_opcode_lengths to std::unique_ptr<unsigned char[]>.
Change type of include_dirs to std::vector<const char *>. Remove
num_include_dirs, include_dirs_size. Change type of file_names to
std::vector<file_entry>. Remove num_file_names, file_names_size.
(line_header::line_header): New.
(line_header::add_include_dir, line_header::add_file_name): New
methods.
(line_header::include_dir_at): Remove NULL check.
(line_header::file_name_at): Add const overload.
(line_header_up): New unique_ptr typedef.
(dw2_get_file_names_reader): Use line_header_up. Adjust to use
std::vector. Remove free_line_header call.
(dwarf2_build_include_psymtabs): Use line_header_up. Remove
free_line_header call.
(free_cu_line_header): Delete.
(handle_DW_AT_stmt_list, handle_DW_AT_stmt_list)
(setup_type_unit_groups): Use line_header_up instead of cleanups.
Adjust to use std::vector.
(free_line_header): Delete.
(free_line_header_voidp): Use delete.
(add_include_dir): Replace with ...
(line_header::add_include_dir): ... this method. Use std::vector.
(add_file_name): Replace with ...
(line_header::add_file_name): ... this method. Use std::vector.
(add_include_dir_stub): Delete.
(read_formatted_entries): Remove memset.
(dwarf_decode_line_header): Return a line_header_up instead of a
raw pointer. Remove cleanup handling. Pass lambdas to
read_formatted_entries. Adjust to use line_header methods.
(dwarf_decode_lines_1): Adjust to use line_header methods.
(dwarf_decode_lines, file_file_name, file_full_name): Adjust to
use std::vector.
Jon Turney [Thu, 2 Jun 2016 13:46:58 +0000 (13:46 +0000)]
Use symbolic constants instead of magic numbers with add_data_entry()
Use symbolic constants from include/coff/internal.h instead of magic numbers
with add_data_entry()
bfd/ChangeLog:
2017-04-02 Jon Turney <jon.turney@dronecode.org.uk>
(_bfd_XXi_swap_aouthdr_out): For clarity, use defines rather than
numbers for DataDirectory entry indicies passed to
add_data_entry().
H.J. Lu [Tue, 4 Apr 2017 16:05:48 +0000 (09:05 -0700)]
Support ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
Palmer Dabbelt [Mon, 3 Apr 2017 17:08:29 +0000 (10:08 -0700)]
RISC-V: Resurrect GP-relative disassembly hints
We missed a "_gp" when changing the GP symbol. To make sure that
doesn't happen again, we now use the same definition everywhere (thanks,
Nick).
include/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elf/riscv.h (RISCV_GP_SYMBOL): New define.
bfd/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (GP_NAME): Delete.
(riscv_global_pointer_value): Change GP_NAME to RISCV_GP_SYMBOL.
(_bfd_riscv_relax_lui): Likewise.
opcodes/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-dis.c (riscv_disassemble_insn): Change "_gp" to
RISCV_GP_SYMBOL.
Simon Marchi [Tue, 4 Apr 2017 14:48:24 +0000 (10:48 -0400)]
gdbserver: Clear .deps on clean
In some situations, the dependency tracking files in .deps can refer to
source files that were removed or renamed, leading to errors like:
make: *** No rule to make target `version.c', needed by `version.o'. Stop.
This patch makes the clean target clear the .deps directory, which gives
the user a chance to recover from the error wihtout knowing about the
internals of the build system.
It is already done for GDB. See here for more details:
https://sourceware.org/ml/gdb-patches/2009-03/msg00000.html
gdb/gdbserver/ChangeLog:
* Makefile.in (clean): Clear .deps.
Simon Marchi [Tue, 4 Apr 2017 14:31:50 +0000 (10:31 -0400)]
remote.c: Use ptid_t instead of struct ptid
It's the only place in the codebase that uses "struct ptid", so change
it to ptid_t for consistency.
gdb/ChangeLog:
* remote.c (set_general_thread, set_continue_thread): Use ptid_t
instead of struct ptid.
Nick Clifton [Tue, 4 Apr 2017 10:23:36 +0000 (11:23 +0100)]
Fix null pointer dereferences when using a link built with clang.
PR binutils/21342
* elflink.c (_bfd_elf_define_linkage_sym): Prevent null pointer
dereference.
(bfd_elf_final_link): Only initialize the extended symbol index
section if there are extended symbol tables to list.
Alan Hayward [Tue, 4 Apr 2017 07:42:30 +0000 (08:42 +0100)]
Remove MAX_REGISTER_SIZE from frame.c
gdb/
* frame.c (get_frame_register_bytes): Unwind using value.
(put_frame_register_bytes): Likewise.
GDB Administrator [Tue, 4 Apr 2017 00:00:42 +0000 (00:00 +0000)]
Automatic date update in version.in
Palmer Dabbelt [Mon, 3 Apr 2017 16:03:57 +0000 (09:03 -0700)]
RISC-V: Avoid a const warning
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* config/tc-riscv.c (riscv_clear_subsets): Cast argument to free to
avoid const warnings.
Andrew Jenner [Mon, 3 Apr 2017 16:13:19 +0000 (09:13 -0700)]
IA16 support
* config.sub: Handle ia16 in $basic_machine.
bfd/
* config.bfd: Handle ia16.
gas/
* configure.tgt: Handle ia16.
ld/
* configure.tgt: Handle ia16.
H.J. Lu [Mon, 3 Apr 2017 15:25:36 +0000 (08:25 -0700)]
Correct the ChangeLog entry
H.J. Lu [Mon, 3 Apr 2017 15:03:14 +0000 (08:03 -0700)]
ld: Support ELF GNU program properties
From .note.gnu.property section in each ELF input, we build a list of
GNU properties if .note.gnu.property section isn't corrupt. The unknown
properties are ignored. All property lists in relocatable inputs are
merged into an output property list. When -z stack-size=N is used and
N isn't 0, the GNU_PROPERTY_STACK_SIZE property will be merged with or
added to the output property list. .note.gnu.property section is
generated in output from the output property list.
bfd/
* Makefile.am (BFD32_BACKENDS): Add elf-properties.lo.
(BFD32_BACKENDS_CFILES): Add elf-properties.c.
* configure.ac (elf): Add elf-properties.lo.
* Makefile.in: Regenerated.
* configure: Likewise.
* elf-bfd.h (elf_property_kind): New.
(elf_property): Likewise.
(elf_property_list): Likewise.
(elf_properties): Likewise.
(_bfd_elf_parse_gnu_properties): Likewise.
(_bfd_elf_get_property): Likewise.
(_bfd_elf_link_setup_gnu_properties): Likewise.
(elf_backend_data): Add parse_gnu_properties, merge_gnu_properties
and setup_gnu_properties.
(elf_obj_tdata): Add properties.
* elf-properties.c: New file.
* elf32-i386.c (elf_i386_parse_gnu_properties): New.
(elf_i386_merge_gnu_properties): Likewise.
(elf_backend_parse_gnu_properties): Likewise.
(elf_backend_merge_gnu_properties): Likewise.
* elf64-x86-64.c (elf_x86_64_parse_gnu_properties): Likewise.
(elf_x86_64_merge_gnu_properties): Likewise.
(elf_backend_parse_gnu_properties): Likewise.
(elf_backend_merge_gnu_properties): Likewise.
* elfxx-target.h (elf_backend_merge_gnu_properties): Likewise.
(elf_backend_parse_gnu_properties): Likewise.
(elf_backend_setup_gnu_properties): Likewise.
(elfNN_bed): Add elf_backend_parse_gnu_properties,
elf_backend_merge_gnu_properties and
elf_backend_setup_gnu_properties.
ld/
* ld/NEWS: Mention support for ELF GNU program properties.
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Call
ELF setup_gnu_properties.
* testsuite/ld-i386/i386.exp: Run property tests for Linux/i386.
* testsuite/ld-i386/pass.c: New file.
* testsuite/ld-i386/property-1.r: Likewise.
* testsuite/ld-i386/property-2.r: Likewise.
* testsuite/ld-i386/property-3.r: Likewise.
* testsuite/ld-i386/property-4.r: Likewise.
* testsuite/ld-i386/property-5.r: Likewise.
* testsuite/ld-i386/property-6.r: Likewise.
* testsuite/ld-i386/property-6a.c: Likewise.
* testsuite/ld-i386/property-6b.c: Likewise.
* testsuite/ld-i386/property-6c.S: Likewise.
* testsuite/ld-i386/property-7.r: Likewise.
* testsuite/ld-i386/property-no-copy.S: Likewise.
* testsuite/ld-i386/property-stack.S: Likewise.
* testsuite/ld-i386/property-unsorted-1.S: Likewise.
* testsuite/ld-i386/property-unsorted-2.S: Likewise.
* testsuite/ld-i386/property-x86-1.S: Likewise.
* testsuite/ld-i386/property-x86-2.S: Likewise.
* testsuite/ld-x86-64/pass.c: Likewise.
* testsuite/ld-x86-64/property-1.r: Likewise.
* testsuite/ld-x86-64/property-2.r: Likewise.
* testsuite/ld-x86-64/property-3.r: Likewise.
* testsuite/ld-x86-64/property-4.r: Likewise.
* testsuite/ld-x86-64/property-5.r: Likewise.
* testsuite/ld-x86-64/property-6.r: Likewise.
* testsuite/ld-x86-64/property-6a.c: Likewise.
* testsuite/ld-x86-64/property-6b.c: Likewise.
* testsuite/ld-x86-64/property-6c.S: Likewise.
* testsuite/ld-x86-64/property-7.r: Likewise.
* testsuite/ld-x86-64/property-no-copy.S: Likewise.
* testsuite/ld-x86-64/property-stack.S: Likewise.
* testsuite/ld-x86-64/property-unsorted-1.S: Likewise.
* testsuite/ld-x86-64/property-unsorted-2.S: Likewise.
* testsuite/ld-x86-64/property-x86-1.S: Likewise.
* testsuite/ld-x86-64/property-x86-2.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run property tests for
Linux/x86-64.
Nick Clifton [Mon, 3 Apr 2017 11:14:06 +0000 (12:14 +0100)]
readelf: Fix overlarge memory allocation when reading a binary with an excessive number of program headers.
PR binutils/21345
* readelf.c (get_program_headers): Check for there being too many
program headers before attempting to allocate space for them.
Nick Clifton [Mon, 3 Apr 2017 10:13:21 +0000 (11:13 +0100)]
Fix runtime seg-fault in readelf when parsing a corrupt MIPS binary.
PR binutils/21344
* readelf.c (process_mips_specific): Check for an out of range GOT
entry before reading the module pointer.
Nick Clifton [Mon, 3 Apr 2017 10:01:45 +0000 (11:01 +0100)]
readelf: Update check for invalid word offsets in ARM unwind information.
PR binutils/21343
* readelf.c (get_unwind_section_word): Fix snafu checking for
invalid word offsets in ARM unwind information.
GDB Administrator [Mon, 3 Apr 2017 00:00:37 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 2 Apr 2017 00:00:36 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 1 Apr 2017 00:00:39 +0000 (00:00 +0000)]
Automatic date update in version.in
Palmer Dabbelt [Wed, 29 Mar 2017 23:05:40 +0000 (16:05 -0700)]
RISC-V: Allow ISA subsets to be disabled
Without this patch, passing "-march=rv64ic -march=rv64i" results in
you getting a "RV64IC" toolchain, which isn't expected.
gas/ChangeLog:
2017-03-30 Palmer Dabbelt <palmer@dabbelt.com>
* config/tc-riscv.c (riscv_clear_subsets): New function.
(riscv_add_subset): Call riscv_clear_subsets and riscv_set_rvc to
clear RVC when it's been previously set.
Andrew Waterman [Wed, 22 Mar 2017 09:09:56 +0000 (02:09 -0700)]
RISC-V: Add physical memory protection CSRs
2017-03-27 Andrew Waterman <andrew@sifive.com>
* opcode/riscv-opc.h (CSR_PMPCFG0): New define.
(CSR_PMPCFG1): Likewise.
(CSR_PMPCFG2): Likewise.
(CSR_PMPCFG3): Likewise.
(CSR_PMPADDR0): Likewise.
(CSR_PMPADDR1): Likewise.
(CSR_PMPADDR2): Likewise.
(CSR_PMPADDR3): Likewise.
(CSR_PMPADDR4): Likewise.
(CSR_PMPADDR5): Likewise.
(CSR_PMPADDR6): Likewise.
(CSR_PMPADDR7): Likewise.
(CSR_PMPADDR8): Likewise.
(CSR_PMPADDR9): Likewise.
(CSR_PMPADDR10): Likewise.
(CSR_PMPADDR11): Likewise.
(CSR_PMPADDR12): Likewise.
(CSR_PMPADDR13): Likewise.
(CSR_PMPADDR14): Likewise.
(CSR_PMPADDR15): Likewise.
(pmpcfg0): Declare register.
(pmpcfg1): Likewise.
(pmpcfg2): Likewise.
(pmpcfg3): Likewise.
(pmpaddr0): Likewise.
(pmpaddr1): Likewise.
(pmpaddr2): Likewise.
(pmpaddr3): Likewise.
(pmpaddr4): Likewise.
(pmpaddr5): Likewise.
(pmpaddr6): Likewise.
(pmpaddr7): Likewise.
(pmpaddr8): Likewise.
(pmpaddr9): Likewise.
(pmpaddr10): Likewise.
(pmpaddr11): Likewise.
(pmpaddr12): Likewise.
(pmpaddr13): Likewise.
(pmpaddr14): Likewise.
(pmpaddr15): Likewise.
Simon Marchi [Fri, 31 Mar 2017 15:19:44 +0000 (11:19 -0400)]
gdbserver: Suffix generated C files with -generated
I noticed that there were some missing files in gdbserver's gitignore
(some generated register format .c files). Of course the easy fix would
be to add those files to .gitignore, but I think we can do a better job,
so that we don't have to worry about adding generated files to
.gitignore or the clean Makefile target.
I suggest naming all generated source files -generated.c. This way, we
can use a single rule in .gitignore and do a "rm -f *-generated.c" to
clean them up.
New in v2:
- Don't rename version.o and xml-builtin.o
gdb/gdbserver/ChangeLog:
* .gitignore: Remove generated files, replace with wildcard.
* (clean): Replace removal of generated files with wildcard.
(version.c): Replace with...
(version-generated.c): ...this.
(xml-builtin.c): Replace with...
(xml-builtin-generated.c): ...this.
(%-ipa.o: %-generated.c, %.o: %-generated.c): New rules.
(%.c: *regformats*): Replace with...
(%-generated.c: *regformats*): ...this.
Pip Cet [Fri, 31 Mar 2017 12:07:01 +0000 (13:07 +0100)]
Fix minor problems with previous wasm32 binutils commit.
binutils * NEWS: Use "WebAssembly" consistently.
* testsuite/binutils-all/wasm32/wasm32.exp: Fix copyright notice.
Nick Clifton [Fri, 31 Mar 2017 11:54:38 +0000 (12:54 +0100)]
Reduce the size of s390 symbol tables by allowing relocations in mergeable string sections (eg .debug_str) to be made section relative rather than symbol relative.
PR gas/21333
* config/tc-s390.c (tc_s390_fix_adjustable): Allow non pc-relative
fixups in mergeable sections to be adjusted.
GDB Administrator [Fri, 31 Mar 2017 00:00:31 +0000 (00:00 +0000)]
Automatic date update in version.in
Pip Cet [Thu, 30 Mar 2017 09:57:21 +0000 (10:57 +0100)]
Add support for the WebAssembly file format and the wasm32 ELF conversion to gas and the binutils.
binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files.
(guess_is_rela): Likewise.
(dump_relocations): Likewise.
(is_32bit_abs_reloc): Likewise.
(is_none_reloc_): Likewise.
* NEWS: Mention the new support.
* testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32
as ELF target.
(supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE.
* testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations.
* testsuite/binutils-all/wasm32: New directory.
* testsuite/binutils-all/wasm32/create-wasm.d: New file.
* testsuite/binutils-all/wasm32/create-wasm.s: Likewise.
* testsuite/binutils-all/wasm32/custom-section.d: Likewise.
* testsuite/binutils-all/wasm32/custom-section.s: Likewise.
* testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise.
* testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise.
* testsuite/binutils-all/wasm32/long-sections.d: Likewise.
* testsuite/binutils-all/wasm32/long-sections.s: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm.d: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm.s: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise.
* testsuite/binutils-all/wasm32/prepared-section.d: Likewise.
* testsuite/binutils-all/wasm32/prepared-section.s: Likewise.
* testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests.
gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target.
* config/tc-wasm32.c: New file: Add WebAssembly assembler target.
* Makefile.am: Add WebAssembly assembler target.
* configure.tgt: Add WebAssembly assembler target.
* doc/c-wasm32.texi: New file: Start documenting WebAssembly
assembler.
* doc/all.texi: Define WASM32.
* doc/as.texinfo: Add WebAssembly entries.
* NEWS: Mention the new support.
* Makefile.in: Regenerate.
* po/gas.pot: Regenerate.
* po/POTFILES.in: Regenerate.
* testsuite/gas/wasm32: New directory.
* testsuite/gas/wasm32/allinsn.d: New file.
* testsuite/gas/wasm32/allinsn.s: New file.
* testsuite/gas/wasm32/illegal.l: New file.
* testsuite/gas/wasm32/illegal.s: New file.
* testsuite/gas/wasm32/illegal-2.l: New file.
* testsuite/gas/wasm32/illegal-2.s: New file.
* testsuite/gas/wasm32/illegal-3.l: New file.
* testsuite/gas/wasm32/illegal-3.s: New file.
* testsuite/gas/wasm32/illegal-4.l: New file.
* testsuite/gas/wasm32/illegal-4.s: New file.
* testsuite/gas/wasm32/illegal-5.l: New file.
* testsuite/gas/wasm32/illegal-5.s: New file.
* testsuite/gas/wasm32/illegal-6.l: New file.
* testsuite/gas/wasm32/illegal-6.s: New file.
* testsuite/gas/wasm32/illegal-7.l: New file.
* testsuite/gas/wasm32/illegal-7.s: New file.
* testsuite/gas/wasm32/illegal-8.l: New file.
* testsuite/gas/wasm32/illegal-8.s: New file.
* testsuite/gas/wasm32/illegal-9.l: New file.
* testsuite/gas/wasm32/illegal-9.s: New file.
* testsuite/gas/wasm32/illegal-10.l: New file.
* testsuite/gas/wasm32/illegal-10.s: New file.
* testsuite/gas/wasm32/illegal-11.l: New file.
* testsuite/gas/wasm32/illegal-11.s: New file.
* testsuite/gas/wasm32/illegal-12.l: New file.
* testsuite/gas/wasm32/illegal-12.s: New file.
* testsuite/gas/wasm32/illegal-13.l: New file.
* testsuite/gas/wasm32/illegal-13.s: New file.
* testsuite/gas/wasm32/illegal-14.l: New file.
* testsuite/gas/wasm32/illegal-14.s: New file.
* testsuite/gas/wasm32/illegal-15.l: New file.
* testsuite/gas/wasm32/illegal-15.s: New file.
* testsuite/gas/wasm32/illegal-16.l: New file.
* testsuite/gas/wasm32/illegal-16.s: New file.
* testsuite/gas/wasm32/illegal-17.l: New file.
* testsuite/gas/wasm32/illegal-17.s: New file.
* testsuite/gas/wasm32/illegal-18.l: New file.
* testsuite/gas/wasm32/illegal-18.s: New file.
* testsuite/gas/wasm32/illegal-19.l: New file.
* testsuite/gas/wasm32/illegal-19.s: New file.
* testsuite/gas/wasm32/illegal-20.l: New file.
* testsuite/gas/wasm32/illegal-20.s: New file.
* testsuite/gas/wasm32/illegal-21.l: New file.
* testsuite/gas/wasm32/illegal-21.s: New file.
* testsuite/gas/wasm32/illegal-22.l: New file.
* testsuite/gas/wasm32/illegal-22.s: New file.
* testsuite/gas/wasm32/illegal-24.l: New file.
* testsuite/gas/wasm32/illegal-24.s: New file.
* testsuite/gas/wasm32/illegal-25.l: New file.
* testsuite/gas/wasm32/illegal-25.s: New file.
* testsuite/gas/wasm32/reloc.d: New file.
* testsuite/gas/wasm32/reloc.s: New file.
* testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly
architecture.
opcodes * configure.ac: Add (empty) bfd_wasm32_arch target.
* configure: Regenerate
* po/opcodes.pot: Regenerate.
include * opcode/wasm.h: New file to support wasm32 architecture.
* elf/wasm32.h: Add R_WASM32_32 relocation.
bfd * elf32-wasm32.c: Add relocation code, two relocs.
* reloc.c: Add wasm32 relocations.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
* bfd/po/bfd.pot: Regenerate.
Iain Buclaw [Thu, 30 Mar 2017 08:43:03 +0000 (10:43 +0200)]
Fix classification of `module.type' in D lexer.
The two-tier lexer in gdb/d-exp.y, which resolves fully qualified names
missed a case where `module.type' was not being classified as one token.
And so when the grammar takes over, it matched the remaining tokens
against the rule `TypeExp . IdentifierExp', where we were expecting to
instead match cast expression `( TypeExp ) UnaryExpression'.
Adding a case for TYPE_CODE_MODULE in type_aggregate_p means that
classify_inner_name will get a chance to lookup the symbol.
This was noticed when using `watch -l', and got the rather confusing
response:
A syntax error in expression, near `) 0x0add4e55'.
So it's been included in the testsuite, along with another test that
does effectively the same expression, but explicitly.
gdb/ChangeLog:
* d-exp.y (type_aggregate_p): Treat TYPE_CODE_MODULE as being
aggregate-like.
gdb/testsuite/ChangeLog:
* gdb.dlang/watch-loc.c: New file.
* gdb.dlang/watch-loc.exp: New file.
GDB Administrator [Thu, 30 Mar 2017 00:00:41 +0000 (00:00 +0000)]
Automatic date update in version.in
Jan Kratochvil [Wed, 29 Mar 2017 19:53:43 +0000 (21:53 +0200)]
Fix warning: Invalid entry in .debug_gdb_scripts section
$ gdb rustc
Reading symbols from rustc...Reading symbols from /usr/lib/debug/usr/bin/rustc.debug...done.
done.
warning: Invalid entry in .debug_gdb_scripts section
/usr/bin/rustc
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[15] .debug_gdb_scripts PROGBITS
00000000000008ed 0008ed 000022 00 AMS 0 0 1
/usr/lib/debug/usr/bin/rustc.debug
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[15] .debug_gdb_scripts NOBITS
00000000000008ed 000280 000022 00 AMS 0 0 1
There remains questionable whether bfd_get_section_by_name() should not return
an error for !SEC_LOAD but I haven't investigated that.
gdb/ChangeLog
2017-03-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* auto-load.c (auto_load_section_scripts): Check SEC_HAS_CONTENTS.
gdb/testsuite/ChangeLog
2017-03-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-section-script.exp (sepdebug): New testcases.
Jose E. Marchesi [Wed, 29 Mar 2017 19:20:23 +0000 (21:20 +0200)]
opcodes: sparc: support missing SPARC ASIs from UA2005, UA2007, OSA2011, & OSA2015
Yao Qi [Wed, 29 Mar 2017 15:56:31 +0000 (16:56 +0100)]
Add constructor and destructor to thread_info
This patch adds constructor and destructor to thread_info.
gdb:
2017-03-29 Yao Qi <yao.qi@linaro.org>
* gdbthread.h (struct thread_info): Declare constructor and
destructor. Add some in-class member initializers.
* thread.c (free_thread): Remove.
(init_thread_list): Call delete instead of free_thread.
(new_thread): Call thread_info constructor.
(thread_info::thread_info): New function.
(thread_info::~thread_info): New function.
(delete_thread_1): Call delete instead of free_thread.
(make_cleanup_restore_current_thread): Move tp and frame to
inner block.
Alan Modra [Wed, 29 Mar 2017 03:13:06 +0000 (13:43 +1030)]
PowerPC -Mraw disassembly
This adds -Mraw for PowerPC objdump, a disassembler option to display
the underlying machine instruction rather than aliases. For example,
"rlwinm" always rather than "rotlwi" when the instruction is
performing a simple rotate.
binutils/
* doc/binutils.texi (objdump): Document PowerPC -M options.
gas/
* config/tc-ppc.c (md_parse_option): Reject -mraw.
include/
* opcode/ppc.h (PPC_OPCODE_RAW): Define.
(PPC_OPCODE_*): Make them all unsigned long long constants.
opcodes/
* ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add
"raw" option.
(lookup_powerpc): Don't special case -1 dialect. Handle
PPC_OPCODE_RAW.
(print_insn_powerpc): Mask out PPC_OPCODE_ANY on first
lookup_powerpc call, pass it on second.
Nick Clifton [Wed, 29 Mar 2017 11:27:44 +0000 (12:27 +0100)]
Improve the speed of scanning PE binaries for line number information.
PR binutils/18025
* coff-bfd.h (struct coff_section_data): Add new fields:
saved_bias and bias.
* coffgen.c (coff_find_nearest_line_with_names): Cache the bias
computed for PE binaries.
* dwarf2.c (scan_unit_for_symbols): Only warn once about each
missing abbrev.
GDB Administrator [Wed, 29 Mar 2017 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
Hans-Peter Nilsson [Tue, 28 Mar 2017 21:43:09 +0000 (23:43 +0200)]
Fix for PR ld/16044: elf32-cris.c h->plt.refcount inconsistency
Anton Kolesov [Fri, 10 Feb 2017 11:12:09 +0000 (14:12 +0300)]
arc: Add prologue analysis
Add a prologue analysis that recognizes all instructions that may happen in
compiler-generated prologue, including various stores, core register moves,
subtraction and ENTER_S instruction that does a lot of prologue actions through
microcode.
Testcases cover various prologue scenarios, including instructions that are
spread across multiple 16-bit encodings (for example there are 7 encodings of
store instruction).
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.c (arc_frame_cache): Add support for prologue analysis.
(arc_skip_prologue): Likewise.
(arc_make_frame_cache): Likewise.
(arc_pv_get_operand): New function.
(arc_is_in_prologue): Likewise.
(arc_analyze_prologue): Likewise.
(arc_print_frame_cache): Likewise.
(MAX_PROLOGUE_LENGTH): New constant.
gdb/doc/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.texinfo (Synopsys ARC): Document "set debug arc 2".
gdb/testsuite/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.arch/arc-analyze-prologue.S: New file.
* gdb.arch/arc-analyze-prologue.exp: Likewise.
Anton Kolesov [Fri, 10 Feb 2017 11:12:06 +0000 (14:12 +0300)]
arc: Add disassembler helper
Add disassembler helper for GDB, that uses opcodes structure arc_instruction
and adds convenience functions to handle instruction operands. This interface
solves at least those problems with arc_instruction:
* Some instructions, like "push_s", have implicit operands which are not
directly present in arc_instruction.
* Operands of particular meaning, like branch/jump targets, have various
locations and meaning depending on type of branch/target.
* Access to operand value is abstracted into a separate function, so callee
code shouldn't bother if operand value is an immediate value or in a
register.
Testcases included in this commit are fairly limited - they test exclusively
branch instructions, something that will be used in software single stepping.
Most of the other parts of this disassembler helper are tested during prologue
analysis testing.
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* configure.tgt: Add arc-insn.o.
* arc-tdep.c (arc_delayed_print_insn): Make non-static.
(dump_arc_instruction_command): New function.
(arc_fprintf_disasm): Likewise.
(arc_disassemble_info): Likewise.
(arc_insn_get_operand_value): Likewise.
(arc_insn_get_operand_value_signed): Likewise.
(arc_insn_get_memory_base_reg): Likewise.
(arc_insn_get_memory_offset): Likewise.
(arc_insn_get_branch_target): Likewise.
(arc_insn_dump): Likewise.
(arc_insn_get_linear_next_pc): Likewise.
* arc-tdep.h (arc_delayed_print_insn): Add function declaration.
(arc_disassemble_info): Likewise.
(arc_insn_get_branch_target): Likewise.
(arc_insn_get_linear_next_pc): Likewise.
* NEWS: Mention new "maint print arc arc-instruction".
gdb/doc/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.texinfo (Synopsys ARC): Add "maint print arc arc-instruction".
gdb/testsuite/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.arch/arc-decode-insn.S: New file.
* gdb.arch/arc-decode-insn.exp: Likewise.
Anton Kolesov [Fri, 10 Feb 2017 11:12:01 +0000 (14:12 +0300)]
arc: Add "maintenance print arc" command prefix
Add an "arc" sublist to "maintenance print" command list. The list is empty
for now, its purpose is to contain commands that print internal state of some
ARC-specific structures.
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep (maintenance_print_arc_list): New variable.
(maintenance_print_arc_command): New function.
Anton Kolesov [Fri, 10 Feb 2017 11:11:46 +0000 (14:11 +0300)]
arc: Align internal regnums with architectural regnums
Add ARC_LIMM_REGNUM to arc_regnum enumeration and assign a number 62 to it.
This ensures that for core registers internal register numbers in this enum are
the same as architectural numbers. This allows to use internal register
numbers in the contexts where architectural number is implied, for example when
disassembling instruction during prologue analysis.
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.c (core_v2_register_names, core_arcompact_register_names)
Add "limm" and "reserved".
(arc_cannot_fetch_register, arc_cannot_store_register): Add
ARC_RESERVED_REGNUM and ARC_LIMM_REGNUM.
* arc-tdep.h (arc_regnum): Likewise.
GDB Administrator [Tue, 28 Mar 2017 00:00:37 +0000 (00:00 +0000)]
Automatic date update in version.in
Max Filippov [Sat, 19 Nov 2016 00:08:48 +0000 (16:08 -0800)]
gdbserver: xtensa: support THREADPTR register
Provide aceess to the THREADPTR register to remote gdb.
gdb/gdbserver/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* linux-xtensa-low.c (regnum::R_THREADPTR): New enum member.
(xtensa_fill_gregset): Call collect_register_by_name for
threadptr register.
(xtensa_store_gregset): Call supply_register_by_name for
threadptr register.
Max Filippov [Fri, 18 Nov 2016 19:39:47 +0000 (11:39 -0800)]
gdb: xtensa-linux: support THREADPTR register
Make THREADPTR user register accessible.
gdb/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-linux-nat.c (fill_gregset): Call regcache_raw_collect
for THREADPTR register.
(supply_gregset_reg): Call regcache_raw_supply for THREADPTR
register.
* xtensa-tdep.c (XTENSA_DBREGN_UREG): New definition.
(xtensa_derive_tdep): Initialize tdep->threadptr_regnum.
* xtensa-tdep.h (gdbarch_tdep::threadptr_regnum): New field.
Max Filippov [Tue, 21 Feb 2017 23:41:31 +0000 (15:41 -0800)]
gdb: xtensa: fix test for privileged register number
There are no a0-a15 pseudoregisters at the top of the register set in
call0 registers layout. All registers above gdbarch_num_regs (gdbarch)
are privileged. Treat them as such. This fixes the following gdb
assertion seen when 'finish' command is invoked:
regcache.c:649: internal-error: register_status
regcache_raw_read(regcache*, int, gdb_byte*):
Assertion `regnum >= 0 && regnum < regcache->descr->nr_raw_registers'
failed.
gdb/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-tdep.c (xtensa_pseudo_register_read): Treat all
registers above gdbarch_num_regs (gdbarch) as privileged in
call0 ABI.
Max Filippov [Fri, 18 Nov 2016 16:58:21 +0000 (08:58 -0800)]
gdbserver: xtensa: add call0 support
Correctly handle a0- registers on requests from remote gdb. This fixes
'Register 1 is not available'
and subsequent assertion in the remote gdb connecting to the gdbserver:
'findvar.c:291: internal-error: value_of_register_lazy:
Assertion `frame_id_p(get_frame_id (frame))' failed.'
The register structure is the same for windowed and call0 ABIs because
currently linux kernel internally requires windowed registers, so they
are always present.
gdb/gdbserver/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* linux-xtensa-low.c (xtensa_fill_gregset): Call collect_register
for all registers in a0_regnum..a0_regnum + C0_NREGS range.
(xtensa_store_gregset): Call supply_register for all registers in
a0_regnum..a0_regnum + C0_NREGS range.
Max Filippov [Fri, 18 Nov 2016 17:48:01 +0000 (09:48 -0800)]
gdb: xtensa-linux: add call0 support
Correctly handle a0- registers. This allows debugging call0 code in
linux natively.
The register structure is the same for windowed and call0 ABIs because
currently linux kernel internally requires windowed registers, so they are
always present.
gdb/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-linux-nat.c (fill_gregset): Call regcache_raw_collect
for a single specified register or for all registers in
a0_base..a0_base + C0_NREGS range.
(supply_gregset_reg): Call regcache_raw_supply for a single
specified register or for all registers in a0_base..a0_base +
C0_NREGS range.
Max Filippov [Wed, 22 Feb 2017 01:14:37 +0000 (17:14 -0800)]
gdb: gdbserver: xtensa: make C0_NREGS available
Both gdb and gdbserver need this definition to properly work with call0
ABI. Make it available to both.
gdb/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* arch/xtensa.h (C0_NREGS): Add definition.
* xtensa-tdep.c (C0_NREGS): Remove definition.
Max Filippov [Fri, 18 Nov 2016 17:39:41 +0000 (09:39 -0800)]
gdb: xtensa: clean up xtensa_default_isa initialization
This fixes segfault in native gdb because isa is not initialized at the
point of call to xtensa_isa_maxlength.
gdb/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-tdep.c (xtensa_scan_prologue, call0_analyze_prologue):
Drop xtensa_default_isa initialization.
(xtensa_gdbarch_init): Initialize xtensa_default_isa.
Pedro Alves [Mon, 27 Mar 2017 14:57:19 +0000 (15:57 +0100)]
dwarf2read.c: Clean up out of bounds handling
Multiple places in dwarf2read.c open code 1-based to 0-based index
conversion and check for out of bounds accesses to lh->include_dirs
and lh->file_names. This commit factors those out to a couple methods
and uses them throughout.
gdb/ChangeLog:
2017-03-27 Pedro Alves <palves@redhat.com>
* dwarf2read.c (file_entry) <dir_index>: Add comment.
(file_entry::include_dir): New method.
(line_header::include_dir_at, line_header::file_name_at): New
methods.
(setup_type_unit_groups, setup_type_unit_groups)
(psymtab_include_file_name): Simplify using the new methods.
(lnp_state_machine) <the_line_header>: New field.
<file>: Add comment.
(lnp_state_machine::current_file): New method.
(dwarf_record_line): Simplify using the new methods.
(init_lnp_state_machine): Initialize the "the_line_header" field.
(dwarf_decode_lines_1, dwarf_decode_lines, file_file_name):
Simplify using the new methods.
Pedro Alves [Mon, 27 Mar 2017 12:56:49 +0000 (13:56 +0100)]
gdb/cp-name-parser.y: Eliminate make_empty, use cplus_demangle_fill_component
The demangler exports the cplus_demangle_fill_component function that
clients should use to initialize demangle_component components that
use the "s_binary" union member. cp-name-parser.y uses it in some
places, via the fill_comp wrapper, but not all. Several places
instead use a GDB-specific "make_empty" function. Because this
function does not call any of the demangler "fill" functions, we had
to patch it recently to clear the allocated demangle_component's
"d_printing" field, which is supposedly a "private" demangler field.
To avoid such problems in the future, this commit switches those
places to use "fill_comp" instead, and eliminates the "make_empty"
function.
gdb/ChangeLog:
2017-03-27 Pedro Alves <palves@redhat.com>
* cp-name-parser.y (make_empty): Delete.
(demangler_special, nested_name, ptr_operator, array_indicator)
(direct_declarator, declarator_1): Use fill_comp instead of
make_empty.
Pedro Alves [Mon, 27 Mar 2017 12:56:49 +0000 (13:56 +0100)]
cplus_demangle_fill_component: Handle DEMANGLE_COMPONENT_RVALUE_REFERENCE
This patch almost a decade ago:
...
2007-08-31 Douglas Gregor <doug.gregor@gmail.com>
* cp-demangle.c (d_dump): Handle
DEMANGLE_COMPONENT_RVALUE_REFERENCE.
(d_make_comp): Ditto.
...
... missed doing the same change to cplus_demangle_fill_component that
was done to d_make_comp. I.e., teach it to only validate that we're
not passing in a "right" subtree. GDB has recently (finally) learned
about rvalue references, and a change to make it use
cplus_demangle_fill_component more ran into an assertion because of
this.
(GDB is the only user of cplus_demangle_fill_component in both the gcc
and binutils-gdb trees.)
libiberty/ChangeLog:
2017-03-27 Pedro Alves <palves@redhat.com>
* cp-demint.c (cplus_demangle_fill_component): Handle
DEMANGLE_COMPONENT_RVALUE_REFERENCE.
Pip Cet [Mon, 27 Mar 2017 12:41:39 +0000 (13:41 +0100)]
Add support for the WebAssembly backend to the BFD library.
* wasm-module.c: New file to support WebAssembly modules.
* wasm-module.h: New file to support WebAssembly modules.
* doc/webassembly.texi: Start documenting wasm-module.c.
* config.bfd: Add wasm_vec.
* targets.c: Likewise.
* configure.ac: Likewise.
* Makefile.am: Add entries for wasm-module.c.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
Pedro Alves [Mon, 27 Mar 2017 11:28:03 +0000 (12:28 +0100)]
Fix gdb_xml_debug/gdb_xml_error ATTRIBUTE_PRINTF use
The declarations of gdb_xml_debug and gdb_xml_error are passing "0" as
"first-to-check" argument to ATTRIBUTE_PRINTF, as if they were va_args
functions. Consequently, the arguments to gdb_xml_debug /
gdb_xml_error aren't being checked against the format strings.
With that fixed, a couple obvious bugs are exposed, both fixed by this
commit.
gdb/ChangeLog:
2017-03-27 Pedro Alves <palves@redhat.com>
* xml-support.h (gdb_xml_debug): Pass a "first-to-check" argument
to ATTRIBUTE_PRINTF.
* solib-target.c (library_list_start_list): Print "string" not
"version".
* xml-tdesc.c (tdesc_start_field): Pass "field_name" to
gdb_xml_error call.
Alan Modra [Sun, 26 Mar 2017 21:49:48 +0000 (08:19 +1030)]
PR21303, objdump doesn't show e200z4 insns
PR 21303
opcodes/
* ppc-dis.c (struct ppc_mopt): Comment.
(ppc_opts <e200z4>): Move PPC_OPCODE_VLE from .sticky to .cpu.
gas/
* testsuite/gas/ppc/pr21303.d,
* testsuite/gas/ppc/pr21303.s: New test
* testsuite/gas/ppc/ppc.exp: Run it.
Pedro Alves [Mon, 27 Mar 2017 10:56:28 +0000 (11:56 +0100)]
gdb: Make ldirname return a std::string
Eliminates several uses of cleanups.
Tested on x86_64 Fedora 23 with Python 2 and 3.
gdb/ChangeLog
2017-03-27 Pedro Alves <palves@redhat.com>
* dwarf2read.c (struct file_and_directory): New.
(dwarf2_get_dwz_file): Adjust to use std::string.
(dw2_get_file_names_reader): Adjust to use file_and_directory.
(find_file_and_directory): Adjust to return a file_and_directory
object.
(read_file_scope): Adjust to use file_and_directory. Remove
make_cleanup/do_cleanups calls.
(open_and_init_dwp_file): Adjust to use std::string. Remove
make_cleanup/do_cleanups calls.
* python/python.c (do_start_initialization): Adjust to ldirname
returning a std::string.
* utils.c (ldirname): Now returns a std::string.
* utils.h (ldirname): Change return type to std::string.
* xml-syscall.c (xml_init_syscalls_info): Adjust to ldirname
returning a std::string.
* xml-tdesc.c (file_read_description_xml): Likewise.
Pip Cet [Mon, 27 Mar 2017 10:45:24 +0000 (11:45 +0100)]
oops - forgot to add the bfd/ChangeLog entry...
Pip Cet [Mon, 27 Mar 2017 10:39:50 +0000 (11:39 +0100)]
Add minimal support for WebAssembly backend to the BFD library.
include * elf/wasm32.h: New file to support wasm32 architecture.
bfd * cpu-wasm32.c: New file to support wasm32 architecture.
* elf32-wasm32.c: New file to support wasm32 architecture.
* Makefile.am: Add wasm32 architecture.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
Rinat Zelig [Mon, 27 Mar 2017 10:14:30 +0000 (11:14 +0100)]
Implement ARC NPS-400 Ultra Ip and Miscellaneous instructions.
opcodes * arc-nps400-tbl.h: Add Ultra Ip and Miscellaneous instructions format.
* arc-opc.c: Add defines. e.g. F_NJ, F_NM , F_NO_T, F_NPS_SR, F_NPS_M, F_NPS_CORE, F_NPS_ALL.
(insert_nps_misc_imm_offset): New function.
(extract_nps_misc imm_offset): New function.
(arc_num_flag_operands): Add F_NJ, F_NM, F_NO_T.
(arc_flag_special_cases): Add F_NJ, F_NM, F_NO_T.
include * opcode/arc.h (insn_class_t): Add ULTRAIP and MISC class.
gas * testsuite/gas/arc/nps400-12.s: New file.
* testsuite/gas/arc/nps400-12.d: New file.
GDB Administrator [Mon, 27 Mar 2017 00:00:35 +0000 (00:00 +0000)]
Automatic date update in version.in
Jim Wilson [Sun, 26 Mar 2017 03:32:02 +0000 (20:32 -0700)]
Fix bug with cmn/adds where C flag was incorrectly set.
sim/aarch64/
* simulator.c (set_flags_for_add32): Cast result to uint32_t in carry
flag check.
sim/testsuite/sim/aarch64/
* adds.s: Add checks for values -2 and 1, where C is not set.
GDB Administrator [Sun, 26 Mar 2017 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 25 Mar 2017 00:00:12 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Hayward [Fri, 24 Mar 2017 16:53:05 +0000 (16:53 +0000)]
Remove MAX_REGISTER_SIZE from target.c
gdb/
* regcache.c (regcache_debug_print_register): New function.
* regcache.h (regcache_debug_print_register): New declaration.
* target.c (debug_print_register): Remove.
(target_fetch_registers): Call regcache_debug_print_register.
(target_store_registers): Likewise.
Pádraig Brady [Fri, 24 Mar 2017 15:12:53 +0000 (15:12 +0000)]
Avoid segfault on invalid directory table
gdb was segfaulting during backtrace on a binary here, where
fe->dir_index parsed from the DWARF info was seen to access beyond the
provided include_dirs array.
This commit bounds the access to entries actually written to the
array, and was verified to output the backtrace correctly.
gdb/ChangeLog:
* dwarf2read.c (setup_type_unit_groups): Ensure dir_index doesn't
reference beyond the 'lh->include_dirs' array before accessing to
it.
(psymtab_include_file_name): Likewise.
(dwarf_decode_lines_1): Likewise.
(dwarf_decode_lines): Likewise.
(file_file_name): Likewise.
Thomas Preud'homme [Fri, 24 Mar 2017 13:22:16 +0000 (13:22 +0000)]
[GAS/ARM] Fix selected_cpu with default CPU and -mcpu
When GAS is compiled with DEFAULT_CPU set and then run with a -mcpu or
-march option, selected_cpu will be set to the default CPU. This means
the -mcpu is ignored which is surprising behavior. This commit instead
sets selected_cpu from the value passed to -mcpu/-march.
2017-03-24 Thomas preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.: (md_begin): Set selected_cpu from *mcpu_cpu_opt when
CPU_DEFAULT is defined.
Maciej W. Rozycki [Fri, 24 Mar 2017 12:25:49 +0000 (12:25 +0000)]
readelf: Fix incorrect "Version definition past end of section" message (ChangeLog)
Correct ChangeLog entry for commit
c9f02c3e2949 ("readelf: Fix incorrect
"Version definition past end of section" message").
GDB Administrator [Fri, 24 Mar 2017 00:00:33 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Thu, 23 Mar 2017 17:37:06 +0000 (13:37 -0400)]
Remove some unnecessary inferior_ptid setting/restoring when fetching/storing registers
Now that the to_fetch_registers, to_store_registers and
to_prepare_to_store target methods don't rely on the value of
inferior_ptid anymore, we can remove a bunch of now unnecessary setting
and restoring of inferior_ptid.
The asserts added recently in target_fetch_registers and
target_store_registers, which validate that inferior_ptid matches the
regcache's ptid, must go away. It's the whole point of this effort, to
not require inferior_ptid to have a particular value when calling these
functions.
One thing that I noticed is how sol-thread.c's ps_lgetregs and friends
use the current value of inferior_ptid instead of what's passed as
argument (ph->ptid), unlike proc-service.c's versions of the same
functions. Is it expected? I left it like this in the current patch,
but unless there's a good reason for it to be that way, I guess we
should make it use the parameter.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_corefile_thread): Don't set/restore
inferior_ptid.
* proc-service.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
ps_lsetfpregs): Likewise.
* regcache.c (regcache_raw_update, regcache_raw_write): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
ps_lsetfpregs): Likewise.
* target.c (target_fetch_registers, target_store_registers):
Remove asserts.
Alan Hayward [Thu, 23 Mar 2017 14:40:58 +0000 (14:40 +0000)]
Remove MAX_REGISTER_SIZE from sol-thread.c
gdb/
* sol-thread.c (sol_thread_store_registers): Remove regcache calls.
Yao Qi [Thu, 23 Mar 2017 14:11:04 +0000 (14:11 +0000)]
Handle PRFM in AArch64 process record
This patch fixes the bug of handling PRFM instruction. PRFM is documented
in a table with other load and store instructions, but it doesn't do any
load or store. This patch also adds a unit test to PRFM instruction.
gdb:
2017-03-23 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_process_record_test): Declare.
(_initialize_aarch64_tdep): Register it.
(aarch64_record_load_store): Handle PRFM instruction.
(aarch64_process_record_test): New function.
Yao Qi [Thu, 23 Mar 2017 14:11:04 +0000 (14:11 +0000)]
Fix code indentation
gdb:
2017-03-23 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_record_load_store): Fix code
indentation.
Yao Qi [Thu, 23 Mar 2017 14:11:04 +0000 (14:11 +0000)]
Remove AARCH64_RECORD_FAILURE
It is not used at all.
gdb:
2017-03-23 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c: Remove AARCH64_RECORD_FAILURE.
Andreas Arnez [Thu, 23 Mar 2017 11:51:14 +0000 (12:51 +0100)]
Remove constness of libdir in do_start_initialization
The patch "Fix memory leak in python.c:do_start_initialization"
(https://sourceware.org/ml/gdb-patches/2017-03/msg00407.html) introduced a
compilation error on some platforms:
../../binutils-gdb/gdb/python/python.c: In function bool do_start_initialization():
../../binutils-gdb/gdb/python/python.c:1556:16: error: invalid conversion from const void* to void* [-fpermissive]
xfree (libdir);
^
This is fixed by removing the constness of libdir's data type.
gdb/ChangeLog:
* python/python.c (do_start_initialization): Remove 'const' from
data type of libdir.
Philipp Rudo [Thu, 23 Mar 2017 11:22:11 +0000 (12:22 +0100)]
Fix memory leak in python.c:do_start_initialization
When intializing Python the path to the python binary is build the
following way
progname = concat (ldirname (python_libdir), SLASH_STRING, "bin",
SLASH_STRING, "python", (char *) NULL);
This is problematic as both concat and ldirname allocate memory for the
string they return. Thus the memory allocated by ldirname cannot be
accessed afterwards causing a memory leak. Fix it by temporarily storing
libdir in a variable and xfree it after concat.
gdb/ChangeLog:
python/python.c (do_start_initialization): Fix memory leak.
GDB Administrator [Thu, 23 Mar 2017 00:00:42 +0000 (00:00 +0000)]
Automatic date update in version.in
Palmer Dabbelt [Tue, 21 Mar 2017 15:36:44 +0000 (08:36 -0700)]
Sanitize RISC-V GAS help text, documentation
It looks like I missed the GAS help text when going through all the
documentation last time, so it printed some of the old-format (never
upstream) arguments. I fixed this, and when I went to check doc/ I
noticed it was missing the '-fpic'/'-fno-pic' options.
Max Filippov [Wed, 22 Mar 2017 17:19:14 +0000 (10:19 -0700)]
gas: xtensa: make trampolines relaxation work with jumps in slots other than 0
add_jump_to_trampoline assumes that jump instruction is in slot 0,
when it's in other slot that results in fixup that references NULL symbol,
which results in segfault later in xtensa_make_cached_fixup.
Search for the non-NULL symbol in the tc_frag_data.slot_symbols and check
that there's exactly one such slot.
xtensa_relax_frag for RELAX_TRAMPOLINE reassigns fixup from the original
instruction with jump to generated jump in the trampoline frag, but does not
fix its fx_r_type or fx_size. That results in "undecodable fix" or
"fixup not contained within frag" error messages during relaxation.
Fix both these fields.
gas/
2017-03-22 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_relax_frag): Change fx_size of the
reassigned fixup to size of jump instruction (3) and fx_r_type
to BFD_RELOC_XTENSA_SLOT0_OP, as there's only one slot.
(add_jump_to_trampoline): Search
origfrag->tc_frag_data.slot_symbols for the slot with non-NULL
symbol and use that slot instead of slot 0.
Simon Marchi [Wed, 22 Mar 2017 14:35:07 +0000 (10:35 -0400)]
Remove lwp -> pid conversion in linux_nat_xfer_partial
The linux_nat_xfer_partial does a conversion of inferior_ptid: if it's
an LWP (ptid::lwp != 0), it builds a new ptid with the lwp as
the pid and assigns that temporarily to inferior_ptid. For example, if
inferior_ptid is:
{ .pid = 1234, .lwp = 1235 }
it will assign this to inferior_ptid for the duration of the call:
{ .pid = 1235, .lwp = 0 }
Instead of doing this, this patch teaches the inf-ptrace implementation
of xfer_partial to deal with ptids representing lwps by using
get_ptrace_pid.
Also, in linux_proc_xfer_spu and linux_proc_xfer_partial, we use ptid_get_lwp
instead of ptid_get_pid. While not strictly necessary, since the content of
/proc/<pid> and /proc/<lwp> should be the same, it's a bit safer, because:
- some files under /proc/<pid>/ may not work if the <pid> thread is
running, just like ptrace requires a stopped thread. The current
thread's lwp id is more likely to be in the necessary state (stopped).
- if the leader (<pid>) had exited and is thus now zombie, then several
files under "/proc/<pid>" won't work, while they will if you use
"/proc/<lwp>".
The testsuite found no regression on native amd64 linux.
gdb/ChangeLog:
* inf-ptrace.c (inf_ptrace_xfer_partial): Get pid from ptid
using get_ptrace_pid.
* linux-nat.c (linux_nat_xfer_partial): Don't set/restore
inferior_ptid.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use lwp of
inferior_ptid instead of pid.
Nick Clifton [Wed, 22 Mar 2017 14:01:03 +0000 (14:01 +0000)]
Sync top level config files with master versions in the FSF config project.
* config.sub: Sync with master version in config project.
* config.guess: Likewise.
Yao Qi [Wed, 22 Mar 2017 12:40:24 +0000 (12:40 +0000)]
Remove @code for python
There's no reason to use @code for Python the name of a programming
language.
gdb/doc:
2017-03-22 Yao Qi <yao.qi@linaro.org>
* python.texi (Inferiors In Python): Remove @code from Python.
Yao Qi [Wed, 22 Mar 2017 12:35:31 +0000 (12:35 +0000)]
Wrap locally used classes in anonymous namespace
Both aarch64-tdep.c and arm-tdep.c defines a class instruction_reader, which
violates ODR, but linker doesn't an emit error. I fix this issue by wrapping
them by anonymous namespace, but I think it is better to apply this for all
locally used classes.
If it is a good idea to put locally used class into anonymous namespace, we
should document this rule into GDB coding convention, or even GCC coding
convention. Note that anonymous namespace has been used in GCC but GCC
coding convention doesn't mention the it.
gdb:
2017-03-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c: Wrap locally used classes in anonymous
namespace.
* arm-tdep.c: Likewise.
* linespec.c: Likewise.
* ui-out.c: Likewise.
Jonah Graham [Wed, 22 Mar 2017 11:19:44 +0000 (11:19 +0000)]
Import sys in gdb/python/lib/gdb/printer/bound_registers.py
Pick up missing bits from the patch merged in.
2017-03-22 Jonah Graham <jonah@kichwacoders.com>
PR gdb/19637
* python/lib/gdb/printer/bound_registers.py: Import sys.
GDB Administrator [Wed, 22 Mar 2017 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
Sandra Loosemore [Tue, 21 Mar 2017 20:25:09 +0000 (13:25 -0700)]
Disable shared library tests for nios2-*-elf.
The Nios II processor documentation defines relocations for PIC and
shared libraries as part of the GNU/Linux ABI only; GCC rejects -fpic
on bare-metal.
2017-03-21 Sandra Loosemore <sandra@codesourcery.com>
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Return
false for nios2-*-elf.
Simon Marchi [Tue, 21 Mar 2017 15:35:54 +0000 (11:35 -0400)]
windows: Use ptid from regcache in register fetch/store
Use the ptid from the regcache so we don't depend on the current value
of the inferior_ptid global.
Also, change how the current thread is passed to sub-functions. The
windows_fetch_inferior_registers function sets current_thread then calls
do_windows_fetch_inferior_registers, which reads current_thread. This
very much looks like passing a parameter through a global variable. I
think it would be more straightforward to pass the thread as a
parameter.
gdb/ChangeLog:
* windows-nat.c (do_windows_fetch_inferior_registers): Add
windows_thread_info parameter and use it instead of
current_thread.
(windows_fetch_inferior_registers): Don't set current_thread,
pass the thread to do_windows_fetch_inferior_registers. Use
ptid from regcache instead of inferior_ptid.
(do_windows_store_inferior_registers): Add windows_thread_info
parameter and use it instead of current_thread.
(windows_store_inferior_registers): Don't set current_thread,
pass the thread to do_windows_store_inferior_registers. Use
ptid from regcache instead of inferior_ptid.
Simon Marchi [Tue, 21 Mar 2017 15:35:42 +0000 (11:35 -0400)]
Remove remaining reference to struct serial::current_timeout
I get this when trying to build for --host=x68_64-w64-mingw32:
/home/emaisin/src/binutils-gdb/gdb/ser-mingw.c: In function 'void ser_windows_raw(serial*)':
/home/emaisin/src/binutils-gdb/gdb/ser-mingw.c:166:8: error: 'struct serial' has no member named 'current_timeout'
scb->current_timeout = 0;
^~~~~~~~~~~~~~~
It is just a leftover from
9bcbdca808b5f9fec6217d20bd4b48a56008c460
PR remote/21188: Fix remote serial timeout
gdb/ChangeLog:
* ser-mingw.c (ser_windows_raw): Remove reference to
struct serial::current_timeout.
Andreas Krebbel [Tue, 21 Mar 2017 13:21:02 +0000 (14:21 +0100)]
S/390: Remove vx2 facility flag
This patch removes the vx2 facility flag. It will not be used by GCC
and was a misnomer anyway.
Committed to mainline and 2.28 branch.
include/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (S390_INSTR_FLAG_VX2): Remove.
(S390_INSTR_FLAG_FACILITY_MASK): Adjust value.
gas/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Remove S390_INSTR_FLAG_VX2
from cpu_table. Remove vx2, and novx2 from cpu_flags.
opcodes/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Remove vx2 check.
* s390-opc.txt: Remove vx2 instruction flags.
Andi Kleen [Tue, 21 Mar 2017 13:05:19 +0000 (13:05 +0000)]
Add --inlines option to objdump to include scope backtrace of inlined functions when generating source line number information.
* objdump.c (unwind_inlines): Add.
(option_values): Add OPTION_INLINES.
(show_line): Unwind inlines if requested.
(main): Parse OPTION_INLINES.
(usage): Document --inlines.
* doc/binutils.texi: Document --inlines.
* NEWS: Likewise.
Rinat Zelig [Tue, 21 Mar 2017 11:37:33 +0000 (11:37 +0000)]
arc/nps400: Add cp16/cp32 instructions to opcodes library
Instructions for loading or storing 16/32B data from one address type to
another.
gas/ChangeLog
* testsuite/gas/arc/nps400-11.s: New file.
* testsuite/gas/arc/nps400-11.d: New file.
include/ChangeLog
* opcode/arc.h (insn_class_t): Add DMA class.
opcodes/ChangeLog
* arc-nps400-tbl.h: Add cp32/cp16 instructions format.
* arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET.
(insert_nps_imm_offset): New function.
(extract_nps_imm_offset): New function.
(insert_nps_imm_entry): New function.
(extract_nps_imm_entry): New function.
Nick Clifton [Tue, 21 Mar 2017 11:48:57 +0000 (11:48 +0000)]
Update support for GNU BUILD notes so that version notes can contain extra information, and stack protection notes can contain numeric values.
* readelf.c (print_gnu_build_attribute_name): Allow stack
protection notes to contain numeric values. Use a colon rather
than a space to separate a string name from its values. Decode
the numeric value of a stack protection note.
* objcopy.c (merge_gnu_build_notes): Allow version notes to
contain extra text after the protocol version number.
Ivo Raisr [Tue, 21 Mar 2017 11:39:33 +0000 (04:39 -0700)]
Decode properly flags of %ccr register on sparc64.
While at it, decode also properly one-bit flags for %fsr (accrued and
current exception flags were mixed up).
ChangeLog entry:
2017-03-21 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20928
* gdb/sparc-tdep.h (gdbarch_tdep) <sparc64_ccr_type>: New field.
* gdb/sparc64-tdep.c (sparc64_ccr_type): New function.
(sparc64_fsr_type): Fix %fsr decoding.
ChangeLog entry for testsuite:
2017-03-21 Ivo Raisr <ivo.raisr@oracle.com>
PR tdep/20928
* gdb.arch/sparc64-regs.exp: New file.
* gdb.arch/sparc64-regs.S: Likewise.
Tristan Gingold [Fri, 17 Mar 2017 10:12:05 +0000 (11:12 +0100)]
ld: check overflow only for allocated sections.
* ldlang.c (lang_check_section_addresses): Check only for
allocated sections.
Tim Wiederhake [Tue, 21 Mar 2017 07:19:59 +0000 (08:19 +0100)]
Fix break on Python 2
This changes the return type of "gdb.BtraceInstruction.data ()" from
"memoryview" to "buffer" on Python 2.7 and below, similar to what
"gdb.Inferior.read_memory ()" does.
GDB Administrator [Tue, 21 Mar 2017 00:00:24 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Mon, 20 Mar 2017 22:23:47 +0000 (18:23 -0400)]
spu: Use ptid from regcache instead of inferior_ptid
The implementations of to_fetch_registers/to_store_registers in the spu
code use some functions that rely on inferior_ptid. It's simpler for
now to set/restore inferior_ptid.
gdb/ChangeLog:
* spu-linux-nat.c (spu_fetch_inferior_registers,
spu_store_inferior_registers): Use ptid from regcache, set and
restore inferior_ptid.
* spu-multiarch.c (spu_fetch_registers, spu_store_registers):
Likewise.
Simon Marchi [Mon, 20 Mar 2017 21:37:36 +0000 (17:37 -0400)]
Use ptid from regcache in almost all remaining nat files
This patch contains almost all of the remaining changes needed to make
to_fetch_registers/to_store_registers/to_prepare_to_store independent of
inferior_ptid. It contains only some "trivial" changes, the more
complicated ones are in separate patches.
gdb/ChangeLog:
* i386-linux-nat.c (fetch_register, store_register,
i386_linux_fetch_inferior_registers,
i386_linux_store_inferior_registers): Use ptid from regcache.
* ia64-linux-nat.c (ia64_linux_fetch_register,
ia64_linux_store_register): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_register,
inf_ptrace_store_register): Likewise.
* m32r-linux-nat.c (m32r_linux_fetch_inferior_registers,
m32r_linux_store_inferior_registers): Likewise.
* m68k-bsd-nat.c (m68kbsd_fetch_inferior_registers,
m68kbsd_store_inferior_registers): Likewise.
* m68k-linux-nat.c (fetch_register, store_register,
m68k_linux_fetch_inferior_registers,
m68k_linux_store_inferior_registers): Likewise.
* m88k-bsd-nat.c (m88kbsd_fetch_inferior_registers,
m88kbsd_store_inferior_registers): Likewise.
* mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers,
mips_fbsd_store_inferior_registers): Likewise.
* mips-linux-nat.c (mips64_linux_regsets_fetch_registers,
mips64_linux_regsets_store_registers): Likewise.
* mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers,
mipsnbsd_store_inferior_registers): Likewise.
* mips-obsd-nat.c (mips64obsd_fetch_inferior_registers,
mips64obsd_store_inferior_registers): Likewise.
* nto-procfs.c (procfs_fetch_registers, procfs_store_registers):
Likewise.
* ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers,
ppcfbsd_store_inferior_registers): Likewise.
* ppc-linux-nat.c (ppc_linux_fetch_inferior_registers,
ppc_linux_store_inferior_registers): Likewise.
* ppc-nbsd-nat.c (ppcnbsd_fetch_inferior_registers,
ppcnbsd_store_inferior_registers): Likewise.
* ppc-obsd-nat.c (ppcobsd_fetch_registers,
ppcobsd_store_registers): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers):
Likewise.
* ravenscar-thread.c (ravenscar_fetch_registers,
ravenscar_store_registers, ravenscar_prepare_to_store):
Likewise.
* record-btrace.c (record_btrace_fetch_registers,
record_btrace_store_registers, record_btrace_prepare_to_store):
Likewise.
* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
Lookup inferior using ptid from regcache, instead of
current_inferior.
* remote.c (remote_fetch_registers, remote_store_registers): Use
ptid from regcache.
* rs6000-nat.c (fetch_register, store_register): Likewise.
* s390-linux-nat.c (s390_linux_fetch_inferior_registers,
s390_linux_store_inferior_registers): Likewise.
* sh-nbsd-nat.c (shnbsd_fetch_inferior_registers,
shnbsd_store_inferior_registers): Likewise.
* sol-thread.c (sol_thread_fetch_registers,
sol_thread_store_registers): Likewise.
* sparc-nat.c (sparc_fetch_inferior_registers,
sparc_store_inferior_registers): Likewise.
* tilegx-linux-nat.c (fetch_inferior_registers,
store_inferior_registers): Likewise.
* vax-bsd-nat.c (vaxbsd_fetch_inferior_registers,
vaxbsd_store_inferior_registers): Likewise.
* xtensa-linux-nat.c (fetch_gregs, store_gregs, fetch_xtregs,
store_xtregs): Likewise.
Artemiy Volkov [Mon, 20 Mar 2017 20:47:59 +0000 (13:47 -0700)]
Add rvalue reference tests and docs
This patch adds tests for the initial rvalue reference support patchset. All
of the new tests are practically mirrored regular references tests and, except
for the demangler ones, are introduced in new files, which are set to be
compiled with -std=gnu++11. Tested are printing of rvalue reference types and
values, rvalue reference parameters in function overloading, demangling of
function names containing rvalue reference parameters, casts to rvalue
reference types, application of the sizeof operator to rvalue reference types
and values, and support for rvalue references within the gdb python module.
gdb/ChnageLog
PR gdb/14441
* NEWS: Mention support for rvalue references in GDB and python.
* doc/gdb.texinfo (C Plus Plus Expressions): Mention that GDB
supports both lvalue and rvalue references.
gdb/testsuite/ChangeLog
PR gdb/14441
* gdb.cp/demangle.exp: Add rvalue reference tests.
* gdb.cp/rvalue-ref-casts.cc: New file.
* gdb.cp/rvalue-ref-casts.exp: New file.
* gdb.cp/rvalue-ref-overload.cc: New file.
* gdb.cp/rvalue-ref-overload.exp: New file.
* gdb.cp/rvalue-ref-params.cc: New file.
* gdb.cp/rvalue-ref-params.exp: New file.
* gdb.cp/rvalue-ref-sizeof.cc: New file.
* gdb.cp/rvalue-ref-sizeof.exp: New file.
* gdb.cp/rvalue-ref-types.cc: New file.
* gdb.cp/rvalue-ref-types.exp: New file.
* gdb.python/py-rvalue-ref-value-cc.cc: New file.
* gdb.python/py-rvalue-ref-value-cc.exp: New file.