Yann E. MORIN [Sat, 20 Sep 2014 17:09:47 +0000 (19:09 +0200)]
package/libinput: bump version
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vincent Stehlé [Fri, 19 Sep 2014 14:12:52 +0000 (16:12 +0200)]
imx6sabresd: boot to /init in mfgtools mode
Buildroot supplies a nice /init wrapper script to use when booting from a
ramdisk.
We add a patch to u-boot to tell the kernel to boot into /init (instead of
/linuxrc) on i.MX6, when booting in mfgtools mode. This way we can boot a
buildroot system entirely through USB.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com
[Luca: rebase on top of iMX6DL patches and patch iMX6DL defconfig as well]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
[Luca: build- and run-tested on i.MX6DL SABRESD]
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Cc: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Fri, 19 Sep 2014 14:12:51 +0000 (16:12 +0200)]
freescale/imx6-sabresd: document how to create a bootable SD
Document how to create a bootable SD card for the two supported SABRESD cards:
i.MX6Q and i.MX6DL.
The SD card creation relies on an ad-hoc script.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Vincent Stehlé <vincent.stehle@freescale.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Fri, 19 Sep 2014 14:12:50 +0000 (16:12 +0200)]
configs/freescale_imx6dlsabresd: add defconfig for iMX6DL SabreSD
This is very similar to freescale_imx6qsabresd_defconfig, which supports the
i.MX6Q ("Quad", quad core CPU) version of the board, except it supports the
i.MX6DL (DualLite, dual core CPU) version.
The differences are in the U-boot configuration and the device tree file.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Vincent Stehlé <vincent.stehle@freescale.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Fri, 19 Sep 2014 14:12:49 +0000 (16:12 +0200)]
configs/freescale_imx6qsabresd: rename imx6 to imx6q
This defconfig is specific to the SABRESD board equipped with the iMX6Q SoC.
Rename it for clarity in order to avoid confusion with the upcoming
defconfig for the iMX6DL version.
Suggested by Gary Bisson.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Vincent Stehlé <vincent.stehle@freescale.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 20 Sep 2014 13:13:44 +0000 (15:13 +0200)]
docs: improve look of sponsors page
This commit completely reworks the Sponsors page, to improve its look,
put the current sponsor in a clearly visible way, and add the logo of
all sponsors.
[Thomas: fixed the next meeting date, as noticed by Thomas DS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 20 Sep 2014 13:13:43 +0000 (15:13 +0200)]
docs: move Buildroot CSS code into its own file
In preparation to the addition of more CSS code, this commit moves the
Buildroot site specific CSS code from header.html to a dedicated CSS
file.
[Thomas: add missing space before opening curly brace, as suggested by
Thomas DS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Bernd Kuhls [Sun, 21 Sep 2014 16:55:52 +0000 (18:55 +0200)]
package/mesa3d: Bump version to 10.3.0
- rebased mesa3d-0001-Fix-khrplatform.h-not-installed-if-EGL-is-disabled.patch
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 21 Sep 2014 16:55:51 +0000 (18:55 +0200)]
package/ffmpeg: Bump version to 2.4
Version 2.3 is unmaintained:
http://article.gmane.org/gmane.comp.video.ffmpeg.devel/183038
- removed ffmpeg-0002-bfin.patch, applied upstream
- added vlc-0004-libav.patch from upstream to fix VLC compilation
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 21:48:25 +0000 (23:48 +0200)]
package/genpart: make it a target package, too
genpart comes handy when there is a need to programatically generate
partition tables, without the need for a full partitioning program like
fdisk et al.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Frank Hunleth [Sun, 21 Sep 2014 17:08:59 +0000 (13:08 -0400)]
erlang: bump to version 17.3
Erlang/OTP 17.3 is a service release on the 17 track with mostly bug
fixes, but it does contain a number of new features and characteristics
improvements as well.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 21 Sep 2014 18:38:13 +0000 (20:38 +0200)]
package/linux-firmware: install Xceive/Cresta xc4000 and xc5000c
Tweak the prompt, because Xceive is now part of Cresta, so the
new xc5000c-based devices might be branded under either name.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 21 Sep 2014 18:38:12 +0000 (20:38 +0200)]
package/linux-firmware: add option for Chelsio cxgb4 T5
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 21 Sep 2014 18:38:11 +0000 (20:38 +0200)]
package/linux-firmware: add option for iwl7265 firmware
New firmware to support iwlwifi-7265. Only comes in rev-8 or rev-9
flavours, so hide rev-7 when iwlwifi-7265 is selected.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 21 Sep 2014 18:38:10 +0000 (20:38 +0200)]
package/linux-firmware: add new revision for iwlwifi firmware
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 21 Sep 2014 18:38:09 +0000 (20:38 +0200)]
package/linux-firmware: prepare new firmware and new revision for iwlwifi
There is an upcoming new firmware file for a new chipset supported by
iwlwifi, as well as a new revision of the iwlwifi firmware.
The patch only prepares the iwlwifi entries so it is easier to add them.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Sun, 14 Sep 2014 11:07:35 +0000 (13:07 +0200)]
gendoc infra: cosmetic fixes
- wrap lines to 80 characters
- fix space/tab mixup
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: tested all but PDF]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maarten ter Huurne [Tue, 16 Sep 2014 15:42:21 +0000 (17:42 +0200)]
xinetd: Patch configure script to fix rlim_t test
Fixes build with musl libc.
[Thomas: use 004 sequence number instead of 005 for the patch.]
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jeremy Rosen [Fri, 19 Sep 2014 07:13:50 +0000 (09:13 +0200)]
swig : bump to version 2.0.12
[Thomas: don't introduce a SWIG_MAJOR variable, not needed for the
bump.]
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maarten ter Huurne [Fri, 12 Sep 2014 02:07:29 +0000 (04:07 +0200)]
musl: Add post-1.1.4 commit to provide max_align_t
Without this, including libstdc++'s <cstddef> fails.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maarten ter Huurne [Mon, 15 Sep 2014 02:39:49 +0000 (04:39 +0200)]
screen: bump to version 4.2.1
I re-did the patches: one patch per change, patch configure.in instead
of the configure script itself, a few more issues fixed. This should
hopefully make the patches acceptable for upstream, or at least make it
easier to migrate them on version bumps.
This also fixes compilation with musl libc.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 20 Sep 2014 11:09:30 +0000 (08:09 -0300)]
sudo: don't use hardening flags on host tools
Don't use hardening (SSP_CFLAGS & PIE_CFLAGS) flags on host tools since
the host compiler may differ wildly from the tests run on the cross
compiler and they might not work. Fixes:
http://autobuild.buildroot.net/results/b10/
b1091bd04ab988744548b74fb48c64bf291fed2f/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:55:13 +0000 (22:55 +0200)]
package/linux-firmware: add option for Intel SST DSP (Baytrail audio)
We introduce the new "Audio" firmware category for the firmware.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:55:11 +0000 (22:55 +0200)]
package/linux-firmware: add option for ITEtech it9135 firmware
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:55:09 +0000 (22:55 +0200)]
package/linux-firmware: add option for Abilis Systems DVB-T as102
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:55:07 +0000 (22:55 +0200)]
package/linux-firmware: use the new Chelsio cxgb4 firmware
Fix prompt at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:55:04 +0000 (22:55 +0200)]
package/linux-firmware: add option for TI wl18xx firmware
wl18xx are a familly of WLAN + BT chipsets.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:55:03 +0000 (22:55 +0200)]
package/linux-firmware: add option for Realtek rtl88xx firmware
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:55:02 +0000 (22:55 +0200)]
package/linux-firmware: install firmware files for rtlwifi rtl8723be
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:55:01 +0000 (22:55 +0200)]
package/linux-firmware: use the new bnx2x firmware version
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:55:00 +0000 (22:55 +0200)]
package/linux-firmware: split bcm43xx / bcm43xxx
linux-firmware has gained a few firmware files for Broadcom WiFi
chipsets. Installing all of them takes a lot of place, when usually only
one is really needed.
Split the Broadcom BRCM drivers in two categories: bcm43xx and bcm43xxx,
when they were previously a single config option, so as to reclaim a bit
of space.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 20 Sep 2014 20:54:59 +0000 (22:54 +0200)]
package/linux-firmware: bump revision
Some updated firmwares files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Sep 2014 09:23:28 +0000 (10:23 +0100)]
iprutils: Fix static build by passing the libraries in the right order
This mistake was causing failures like this one:
m_post.c:(.text+0x60): undefined reference to `wattr_on'
Patch sent upstream:
https://sourceforge.net/p/iprdd/iprutils/merge-requests/1/
Fixes:
http://autobuild.buildroot.net/results/500/
5004e7b230635e0605acdd17d2b7d2d01fc5075c/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Sep 2014 09:23:27 +0000 (10:23 +0100)]
iprutils: bump version to 2.4.2 and update patches
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Christophe Vu-Brugier [Thu, 18 Sep 2014 10:00:51 +0000 (12:00 +0200)]
python, python3: add patch to prevent distutils from adjusting the shebang
The copy_scripts() method in distutils copies the scripts listed
in the setup file and adjusts the first line to refer to the
current Python interpreter. When cross-compiling, this means that
the adjusted shebang refers to the host Python interpreter.
As a consequence, we add a patch for python and python3 that
force copy_scripts() to preserve the shebang when
cross-compilation is detected.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Christophe Vu-Brugier [Thu, 18 Sep 2014 10:00:55 +0000 (12:00 +0200)]
targetcli-fb: new package
targetcli-fb is a command-line interface for configuring the LIO
generic SCSI target, present in 3.x Linux kernel versions.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Christophe Vu-Brugier [Thu, 18 Sep 2014 10:00:54 +0000 (12:00 +0200)]
python-configshell-fb: new package
configshell-fb is a Python library that provides a framework for
building simple but nice CLI-based applications.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Christophe Vu-Brugier [Thu, 18 Sep 2014 10:00:53 +0000 (12:00 +0200)]
python-rtslib-fb: new package
rtslib-fb is an object-based Python library for configuring the
LIO generic SCSI target, present in 3.x Linux kernel versions.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Christophe Vu-Brugier [Thu, 18 Sep 2014 10:00:52 +0000 (12:00 +0200)]
python-urwid: new package
Urwid is a console user interface library for Python.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:36 +0000 (21:39 +0200)]
manual/user guide/customization: add section on layered customization
Inspired by some text in the 'project-specific patches' section, this patch
adds a separate section on layering customizations by providing multiple
post-build scripts, multiple rootfs overlays, etc.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:35 +0000 (21:39 +0200)]
manual/user guide/customization: rework 'step-by-step instructions'
This patch reworks the section 'Step-by-step instructions for storing
configuration' as follows:
- rename into 'Quick guide to storing your project-specific customizations'
and hence make it serve as a summary to the chapter
- change the introduction to make this clear
- update paths to line-up with section 'recommended directory structure'
- recommend BR2_GLOBAL_PATCH_DIR, as is done in the section on adding
patches.
- mention how to add packages in a project-specific directory (to be
expanded in another patch)
- minor rewording
- rename file into customize-quick-guide.txt
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:34 +0000 (21:39 +0200)]
manual/user guide/customization: refer to dir structure from rootfs section
This small patch adds references to the section on 'recommended directory
structure' from sections explaining the post-build script and rootfs
overlay.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:33 +0000 (21:39 +0200)]
manual/user guide/customization: add section on project-specific packages
This patch adds a new section to chapter 'Project-specific customization' to
describe how to add project-specific packages from a project-specific
directory. The principle was already described in the presentation 'Using
Buildroot for real projects' but was never documented in official Buildroot
documentation.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:32 +0000 (21:39 +0200)]
manual/user guide/customization: change recommendation for package paths
The Buildroot manual was recommending following paths for project-specific
packages:
package/<company>/<boardname>/foo/
$BR2_EXTERNAL/package/<boardname>/foo/
However, if a company has several boards, it is often the case that some
packages are common for different boards. Therefore, introducing a
<boardname> path component is not ideal.
This patch changes the recommendation to:
package/<company>/foo/
$BR2_EXTERNAL/package/foo/
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:31 +0000 (21:39 +0200)]
manual/user guide/customization: rename section 'Customizing packages'
This small patch renames the section 'Customizing packages' to 'Adding
project-specific patches'. Additionally, a minor change is done to the
introduction of this section.
To better reflect the contents, the source file is renamed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:30 +0000 (21:39 +0200)]
manual/user guide/customization: add section on users tables
This patch adds basic documentation on users tables, a topic which was
currently not yet covered in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:29 +0000 (21:39 +0200)]
manual/user guide/customization: add section on device/permission tables
This patch adds basic documentation on device and permission tables, a topic
which was currently not yet covered in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:28 +0000 (21:39 +0200)]
manual/user guide/customization: re-order introduction
This patch re-orders the enumeration of typical project customization
actions:
- move the 'patching packages' section downwards.
- group the entries on post-build scripts and rootfs-overlays to match the
actual section text.
Since indented enumerations use asterixes, update the top-level entries with
asterixes too for consistency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:27 +0000 (21:39 +0200)]
manual/user guide/customization: rework section on storing configuration
This patch promotes the sections on Buildroot configuration and the
configuration of other components to top-level sections, to match the
overview in the introduction of the chapter. The introduction of the
original section is removed as it does not bring additional info anymore.
Some rewording is done as well.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:26 +0000 (21:39 +0200)]
manual/user guide/customization: move section on storing configuration
This patch moves the section 'Basics for storing the configuration' to a
separate file and upwards in the manual section order, to line up with the
listing of customization actions in the introduction of the chapter. The
text itself is currently unchanged, this will be handled in the next patch.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:25 +0000 (21:39 +0200)]
manual/developer guide: minor rework of 'adding board support' section
Minor rework of the section 'Creating your own board support', as follows:
- Rename section into 'Adding support for a particular board'
- Modify introduction
- Refer to Project-specific customizations chapter
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Thu, 18 Sep 2014 19:39:24 +0000 (21:39 +0200)]
manual: move 'Creating your own board support' from User to Developer guide
Section 'Creating your own board support' is seemingly written in the
mindset of adding support for public boards. Therefore, it is more suited in
the Developer guide, rather than in the User guide.
Adding support for custom non-public boards falls under the
'Project-specific customizations' category and will be described in that
section.
This patch moves the unchanged text into a separate file, included from the
Developer guide. The next patch will make some minor changes to the text
itself.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Waldemar Brodkorb [Fri, 19 Sep 2014 10:34:04 +0000 (12:34 +0200)]
qemu-sparc: use default gcc
With the kernel patch from:
http://patchwork.ozlabs.org/patch/384285/
There is no problem with latest gcc anymore.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Waldemar Brodkorb [Fri, 19 Sep 2014 10:33:27 +0000 (12:33 +0200)]
qemu-sparc: update to latest 3.16 kernel
Update default kernel to 3.16.3.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 21 Sep 2014 11:01:15 +0000 (13:01 +0200)]
package/openvmtools: do not force -I/usr/include in CPPFLAGS
Fixes:
http://autobuild.buildroot.net/results/447/
4473d8a99ffec1fde491d172520e86ae1e69fae7/
[Thomas: change patch sequence number to 05, since another patch added
a 04 patch in the mean time.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Karoly Kasza [Mon, 15 Sep 2014 14:56:35 +0000 (16:56 +0200)]
openvmtools: disable -Werror
Disable the mandatory flag -Werror in configure.ac.
This also makes -Wno-deprecated-declarations flag unnecessary.
Fixes:
http://autobuild.buildroot.net/results/440/
4400abc17115d0f5eb65c4eb012f11766cbe5a56/
http://autobuild.buildroot.net/results/02b/
02b24a012dbc76e366c10d3758978eba5e597499/
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Thu, 18 Sep 2014 21:09:24 +0000 (18:09 -0300)]
sudo: bump to version 1.8.10p3
Also add hashes, kill some whitespace and correct the license type
(ICS->ISC).
Enable $EDITOR to point to the right editor for visudo since it normally
expects /usr/bin/vi which in busybox-world is /bin/vi (and some people
might want to use other editors like the operating system sized one).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Fri, 19 Sep 2014 01:45:57 +0000 (22:45 -0300)]
wireshark: security bump to version 1.12.1
Fixes:
CVE-2014-6423 - MEGACO dissector infinite loop.
CVE-2014-6424 - Netflow dissector crash.
CVE-2014-6425 - CUPS dissector crash.
CVE-2014-6426 - HIP dissector infinite loop.
CVE-2014-6427 - RTSP dissector crash.
CVE-2014-6428 - SES dissector crash.
CVE-2014-6429, CVE-2014-6430, CVE-2014-6431, CVE-2014-6432 - Sniffer
file parser crash.
Added hashes as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Francois Perrad [Fri, 19 Sep 2014 18:30:23 +0000 (20:30 +0200)]
lua: add hash
[Peter: fixup hash file syntax]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Francois Perrad [Fri, 19 Sep 2014 18:30:24 +0000 (20:30 +0200)]
luajit: add hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Fri, 19 Sep 2014 13:41:09 +0000 (10:41 -0300)]
BR2_DEPRECATED: update option label and help
We should use positive logic (show things that are otherwise hidden...)
for the help since it's what it does.
It also applies to more options than just packages alone, for example
the AVR32 architecture so add an "options" label to it.
[Peter: tweak help text as suggested by Yann]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jérôme Pouiller [Fri, 19 Sep 2014 14:52:58 +0000 (16:52 +0200)]
whois: Fix unmet dependencies
Fix :
BR2_PACKAGE_WHOIS selects BR2_PACKAGE_GETTEXT which has unmet direct dependencies (BR2_USE_WCHAR)
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Fri, 19 Sep 2014 12:31:19 +0000 (09:31 -0300)]
php: bump to version 5.5.17
Add hash and switch to xz download for space savings.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Mon, 15 Sep 2014 21:01:57 +0000 (23:01 +0200)]
arch: remove BR2_arm10t
The BR2_arm10t option is not correct as it references an ARM family,
while other options indicate a specific ARM core. The ARM cores in
ARM10 family are ARM1020E, ARM1022E and ARM1026EJ-S according to
Wikipedia. However, those are clearly very rare, and Wikipedia only
indicates two Conexant ADSL-related SoC as being part of this family
of ARM cores. Therefore, this commit removes this ARM family.
[Peter: remove nettle.mk reference as pointed out by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Mon, 15 Sep 2014 21:01:56 +0000 (23:01 +0200)]
arch: remove BR2_arm920 reference
The BR2_GCC_TARGET_CPU defines a value for the BR2_arm920 case, but
this option does not exist. Therefore, this commit removes one line of
dead code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 18 Sep 2014 18:26:29 +0000 (15:26 -0300)]
gnutls: bump to version 3.2.18
Also add hash, calculated on downloaded file after verifying signature.
[Peter: tweak hash comment]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Alexey Brodkin [Thu, 18 Sep 2014 11:49:20 +0000 (15:49 +0400)]
libpfm4: needs NPTL support
Fixes following build failure:
--->---
self_smpl_multi.c: In function 'my_thread':
self_smpl_multi.c:354:2: error: implicit declaration of function 'pthread_barrier_wait' [-Werror=implicit-function-declaration]
pthread_barrier_wait(&barrier);
^
self_smpl_multi.c: In function 'main':
self_smpl_multi.c:450:2: error: implicit declaration of function 'pthread_barrier_init' [-Werror=implicit-function-declaration]
pthread_barrier_init(&barrier, 0, max_thr+1);
^
cc1: all warnings being treated as errors
--->---
And since xtensa, avr32 and bfin don't support NPTL we may remove arch
dependencies as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vicente Olivert Riera [Thu, 18 Sep 2014 10:06:45 +0000 (11:06 +0100)]
strace: Apply an upstream patch to fix sa_restorer problems
Wrap sa_restorer member definitions in #ifdef SA_RESTORER to be
consistent with their use.
If an architecture does not provide sa_restorer members but still
defines SA_RESTORER macro, the latter has to be explicitly undefined.
This change fixes compilation failures like this one:
signal.c: In function 'decode_old_sigaction':
signal.c:631:21: error: 'struct old_sigaction' has no member named
'sa_restorer'
signal.c: In function 'decode_new_sigaction':
signal.c:1224:21: error: 'struct new_sigaction' has no member named
'sa_restorer'
* signal.c (struct old_sigaction, struct old_sigaction32,
struct new_sigaction, struct new_sigaction32):
Wrap sa_restorer member in #ifdef SA_RESTORER.
(decode_old_sigaction, decode_new_sigaction):
Wrap use of sa32.sa_restorer in #ifdef SA_RESTORER.
Upstream commit:
https://sourceforge.net/p/strace/code/ci/
c3a5c01051ba29a9f421f4d45d96bbc32df2b796/
Fixes:
http://autobuild.buildroot.net/results/93e/
93e54d8aecc5c178cc3465eb9fd5415461325285/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:20:09 +0000 (11:20 -0300)]
e2fsprogs: switch site and add hash
For some reason the kernel.org download hash doesn't match the
sourceforge hash so switch to kernel.org for the download.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:20:08 +0000 (11:20 -0300)]
iproute2: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:20:07 +0000 (11:20 -0300)]
libnl: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:20:06 +0000 (11:20 -0300)]
openssl: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:20:05 +0000 (11:20 -0300)]
wireless-regdb: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:20:04 +0000 (11:20 -0300)]
btrfs-progs: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:20:03 +0000 (11:20 -0300)]
iw: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:20:02 +0000 (11:20 -0300)]
util-linux: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 20:18:10 +0000 (17:18 -0300)]
iptables: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:20:00 +0000 (11:20 -0300)]
polarssl: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 14:19:59 +0000 (11:19 -0300)]
busybox: add hash
And rename 0006-lzop-add-overflow-check.patch to the proper convention.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 13:08:21 +0000 (10:08 -0300)]
dialog: fixup ncurses config script
Point the build to the proper ncurses config script by using
$(NCURSES_CONFIG_SCRIPTS) from the ncurses package directly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 13:08:20 +0000 (10:08 -0300)]
alsa-utils: fixup ncurses config script
Point the build to the proper (which BTW was broken since it pointed to
the wrong directory) ncurses config by using $(NCURSES_CONFIG_SCRIPTS)
from the ncurses package directly.
Also select the proper variant (widec/non-widec) in configure.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 13:08:19 +0000 (10:08 -0300)]
httping: enable ncurses support
Enable automatic ncurses support now that we've got wide support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 13:08:18 +0000 (10:08 -0300)]
nano: enable ncursesw support
Enable support for ncurses widechar by specifying the proper
ncursesw-config when it's enabled, otherwise keep the old trick in place
when it's not to avoid automatically picking up the host/distro one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 13:08:17 +0000 (10:08 -0300)]
package/ncurses: fixup library symlinks
As stated on the list we need to copy static libraries when doing static
targets so add the logic for that.
Also exclude the wide option for blackfin flat since there seem to be
toolchain issues with that combination - since it's a new feature option
someone interested might look into it later.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jeremy Kerr [Wed, 17 Sep 2014 13:08:16 +0000 (10:08 -0300)]
package/ncurses: Allow building wide char support
Allow ncurses to be configured with wide char support; this causes the
libraries to be built with the 'w' suffix (eg libncursesw.so,
libmenuw.so, etc), so we need to create a few symlinks.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 18:23:18 +0000 (15:23 -0300)]
linux: bump default to version 3.16.3
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 18:23:17 +0000 (15:23 -0300)]
linux-headers: bump 3.{16, 14, 10}.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 13:20:50 +0000 (10:20 -0300)]
sysstat: bump to version 11.0.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jörg Krause [Wed, 17 Sep 2014 07:22:10 +0000 (09:22 +0200)]
package/nodejs: bump to version 0.10.32
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 17 Sep 2014 12:18:39 +0000 (09:18 -0300)]
dbus: security bump to version 1.8.8
Fixes:
CVE-2014-3635 - Buffer access with incorrect length value
CVE-2014-3636 - Allocation of file descriptors or handles
without limits or throttling
CVE-2014-3637 - Missing release of file descriptor or handle after
effective lifetime
CVE-2014-3638 - Algorithmic complexity
CVE-2014-3639 - Allocation of file descriptors or handles without
limits or throttling
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Alexey Brodkin [Mon, 15 Sep 2014 14:49:53 +0000 (18:49 +0400)]
ARC: gcc - Fix SIZE_TYPE to be "unsigned int" instead of "long unsigned int"
This makes size_t to be "unsigned" ssize_t which makes happy compiler on data
type checks.
Fix is taken from current development branch of GCC for ARC and will be a
part of the next release of ARC tools, so at that point patch should be dropped.
https://github.com/foss-for-synopsys-dwc-arc-processors/gcc/commit/
249f040299402647525c3f15b79d319fa7acddd3
Fixes http://autobuild.buildroot.net/results/405/
405da9a945511329929b18740b983c51b8dcc43e
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 16 Sep 2014 19:52:30 +0000 (16:52 -0300)]
sqlcipher: fix static linking
It uses openssl which for buildroot mandates libz, but doesn't link
against it so it fails. Fixes:
http://autobuild.buildroot.net/results/514/
5145617f7c3cece933c845da3c9836d80d062bb6/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Tue, 16 Sep 2014 21:05:12 +0000 (23:05 +0200)]
gst1-plugins-bad: fix sndfile comment
The package is not called gst-plugins-bad, and the other comments in the
file are of the "foo plugin needs a toolchain w/.." form, so use that for
sndfile as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jérôme Pouiller [Tue, 16 Sep 2014 19:48:52 +0000 (21:48 +0200)]
gst-plugins-bad-plugin-sndfile: Fix comment display
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Mon, 15 Sep 2014 20:50:10 +0000 (22:50 +0200)]
gdb: add support for Python in target gdb
This commit adds a new option BR2_PACKAGE_GDB_PYTHON to enable Python
support in the target gdb. Since we can assume that the user will be
aware that Python is needed to get Python support in gdb, we chose to
use a "depends on" dependency instead of a "select" dependency.
The other weird thing is the need for a wrapper shell script to
replace gdb's provided python-config.py script. See the shell script
comment itself for all the details.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Mon, 15 Sep 2014 20:50:09 +0000 (22:50 +0200)]
gdb: add support for Python in host gdb
This commit adds an option BR2_PACKAGE_HOST_GDB_PYTHON that allows to
enable Python support in the cross gdb built by Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Mon, 15 Sep 2014 20:50:08 +0000 (22:50 +0200)]
gdb: reword prompt for host TUI option
There is no need to name the option "GDB TUI support", since this
option is already visible "below" GDB in menuconfig/xconfig. Naming it
"TUI support" is therefore sufficient.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vincent Stehlé [Mon, 15 Sep 2014 20:50:07 +0000 (22:50 +0200)]
gdb: enable tui support for target package
Add a configuration option to compile the gdb target package with the
--enable-tui switch.
This is done pretty much in the same way as in commit
2474fb0bf1a7 ("host-gdb:
enable terminal user interface support"), but for the gdb package on target.
This makes sense only when a full debugger is installed on target,
not for a gdbserver.
[Thomas: remove "default n" since this is the default, adjust the
prompt of the option, and rewrap the help text.]
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Mon, 15 Sep 2014 20:50:06 +0000 (22:50 +0200)]
gdb: needs host-ncurses on the host
Commit
2474fb0bf1a786f3a170631f3dbce8b38092f986 ("host-gdb: enable
terminal user interface support") has added TUI support to host gdb,
and therefore added a dependency on host-ncurses when TUI support is
enabled.
However, host-ncurses is not only needed for TUI support, it is needed
for gdb in all cases as well, so this commit adds a dependency of
host-gdb to host-ncurses.
Fixes:
http://autobuild.buildroot.org/results/153/
153dbdc42103074f7a0895e8871e2eee4eae3325/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Mon, 15 Sep 2014 20:50:05 +0000 (22:50 +0200)]
gdb: remove version 7.6
Now that the default version has changed to 7.7, we can get rid of the
older gdb 7.6 version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
projects / buildroot.git / log