docs: reword a sentence a bit

The "that you know ahead of time" bit just sounded weird as everything on this
page except the backport MR only applies if you know it "ahead of time".

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5378>

docs: add some formatting to the "backport merge request" option

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5378>

docs: prefer `Fixes:` over `Cc: mesa-stable`

`Fixes:` targets a specific commit and as such is much more precise and
useful than `Cc: mesa-stable`, so let's prefer it when applicable.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5378>

docs: drop `git sendemail` instructions

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5378>

docs: reword "sending a patch revision" to "updating a merge request"

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5378>

docs: stop considering `Cc: mesa-stable` as an email address

Our tools haven't needed more than this ^ for a while, and the historical
reasons this used to be an email address don't matter anymore.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5378>

freedreno/a6xx: Set index buffer size to bo size

The number of vertices may be out of bound and if we use it for
computing index buffer size we may get too big a size.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5552>

freedreno/a6xx: Don't write REG_A6XX_RB_SRGB_CNTL in restore

We configure this as part of MRT set up.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5552>

anv: Use resolve_device_entrypoint for dispatch init

There's no good reason to have the "which table do I use?" code
duplicated twice.  The only advantage to the way we were doing it before
was that we could move the switch statement outside the loop.  If this
is ever an actual device initialization perf problem that someone cares
about, we can optimize that when the time comes.  For now, the
duplicated cases are simply a platform-enabling pit-fall.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5530>

docs: suggest alternative installation methods for meson

A couple of popular distros have a habit of never updating anything.
Point their users towards ways of using current versions of meson anyway.

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2988>

turnip: Fill out VkPhysicalDeviceSubgroupProperties

This commit fills out VkPhysicalDeviceSubgroupProperties if present
in a VkPhysicalDeviceProperties2. The values here are simply pulled
from the blob.

Fixes some flakes in dEQP-VK.subgroups.* since dEQP was reading
uninitialized values of VkPhysicalDeviceSubgroupProperties.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5564>

zink: use int assignment for vk int type

this breaks 32bit builds that use -Werror=int-conversion

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5545>

freedreno/ir3: move output_loc to variant

This moves the last bit of important state to be serialized from
ir3_shader to ir3_shader_variant.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: move const_state back to variant

For shader-cache, we want to not have anything important in `ir3_shader`.
And to have shader variants with lower const size limits (to properly
handle cross-stage limits), we also want variants to be able to have
their own const_state.

But we still need binning pass shaders to align with their draw pass
counterpart so that the same const emit can be used for both passes.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: un-embed const_state

Make it an rzalloc'd ptr instead of embedded struct, so it can serve as
the mem ctx for immediates.  This gets rid of needing to explicitly free
the immediates, so one less thing to deal with when moving const_state.
(Also, after we move const_state to the shader variant, we won't need
one for binning pass variants)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: move num_reserved_user_consts out of const_state

When we move const_state to the variant, this will need to stay in the
shader, as it applies to all variants (and we need to store it somewhere
before we have any variants)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: convert over to ralloc

The `ir3_shader` is the root mem ctx, with `ir3_shader_variant` hanging
off that, and various variant specific allocations hanging off the
variant.

This lets us delete a bunch of cleanup code.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: pass variant to ir3_create()

Prep to convert over to ralloc.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

ir3: Split out variant-specific lowering and optimizations

It seems a lot of the lowerings being run the second time were
unnecessary. In addition, when const_state is moved to the variant,
then it will become impossible to know ahead of time whether a variant
needs additional optimizing, which means that ir3_key_lowers_nir() needs
to go away. The new approach should have the same effect, since it skips
running lowerings that are unnecessary and then skips the opt loop if no
optimizations made progress, but it will work better when we move
ir3_nir_analyze_ubo_ranges() to be after variant creation.

The one maybe controversial thing I did is to make
nir_opt_algebraic_late() always happen during variant lowering. I wanted
to avoid code duplication, and it seems to me that we should push the
_late variants as far back as possible so that later opt_algebraic runs
don't miss out on optimization opportunities.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: constify shader key

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: drop shader->num_ubos

The only difference between this and `const_state->num_ubos` was that
the latter is counting # of ubos loaded via `ldg` (based on UBO addrs
in push-consts).  But turns out there isn't really any reason to care.
Instead just add an early return in the one code-path that cares about
the number of `ldg` UBOs.

This gets rid of one more thing we need to move from `ir3_shader` to
`ir3_shader_variant`.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: move ubo_state into const_state

As with const_state, this will also need to move into the variant.  To
simplify that, just move it into the const_state itself, since after all
it is related.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/a6xx: defer userconst cmdstream size calculation

The `ubo_state` will also need to move to `ir3_shader_variant`.  But we
can prepare for that and simplify things a bit if we calculate the
cmdstream on first emit, once we already have the appropriate variant.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: add accessor for const_state

We are going to want to move this back to the variant, and come up with
a different strategy for binning/nonbinning to share the same constant
layout, in order to implement shader-cache support.  (Since then we
can have a mix of dynamically compiled variants and cache hits, so there
is no good place to serialize the const-state.)

To reduce the churn as we re-arrange things, move direct access to the
const-state to a helper fxn.  This patch is the boring churny part.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

freedreno/ir3: refactor out helper to compile shader from asm

Deduplicate a bit of hand-building of ir3_shader/_variant from
computerator and delay test.  This also removes the need for
external things to depend on generated ir3_parser header.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5508>

st/mesa: make texture views inherit compressed_data storage

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2775
Fixes: c3fafa127a0 ("st/mesa: generalize code for the compressed texture map/unmap fallback")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5492>

ac/llvm: load 1 byte at a time if unaligned on gfx10

If buffer or stride is unaligned we use the same trick as on gfx6:
load 1 byte at a time and recompose the output if needed.
This change fixes lots of deqp/glcts tests:
  - dEQP-GLES2.functional.draw.random.1, 10, ...
  - dEQP-GLES2.functional.vertex_arrays.multiple_attributes.stride.3_float2_0_float2_0_float2_17, ...
  - dEQP-GLES2.functional.vertex_arrays.single_attribute.first.byte_first24_offset1_stride2_quads256, ...
  - dEQP-GLES2.functional.vertex_arrays.single_attribute.strides.buffer_0_17_byte2_vec4_dynamic_draw_quads_1, ...
  - dEQP-GLES31.functional.draw_indirect.random.14, ...

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5502>

r600/sfn: Handle memory_barrier

I'm not sure whether this should actually be a barrier accross all
shader processing units, the TGSI code path seems to handle this
only by using GROUP_BARRIER, so let's do the same here.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5206>

r600/sfn: Take SSBO buffer ID offset into account

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5206>

r600/sfn: Add support for reading cube image array dim.

The cube array size can't be queried directly, the number of array
elements must be passed via a constant buffer.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5206>

r600/sfn: Add support for image_size

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5206>

r600/sfn: Add imageio support

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5206>

r600/sfn: lower image derefs

v2: Signal lowering image derefs by using the CAP

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5206>

radv: require LLVM 11+ for GFX 10.3 if not using ACO

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5389>

radv: add support for Sienna Cichlid

Bits copied from RadeonSI. Totally untested.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5389>

aco: replace == GFX10 with >= GFX10 where it's needed

Assume the GFX10.3 ISA is similar to GFX10 which is likely (except
possible minor changes and new instructions for raytracing).

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5389>

radv: replace == GFX10 with >= GFX10 where it's needed

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5389>

intel/tools: Add assembler tests for the cr0 register

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5514>

intel/tools: Disallow control subregisters > 3

> 4 was probably a typo, since the documentation says that there are 4
subregisters (0-3).

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5514>

intel/tools: Require explicit regions/types for special regs

The docs say that these registers should  only be read with a certain
type, and I'm inclined to believe that the hardware behaves that way,
but it makes the assembler a little more confusing and also confuses the
user of the assembler that some operands don't take types or regions.

Just always requiring regions and types seems like the sensible thing.

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5514>

intel/tools: Drop srctype from ipreg

It's unused, and it would cause shift/reduce conflicts after the next
patch.

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5514>

intel/tools: Remove unnecessary reg number checking

a0 is the only address register, and cr0 is the only control register,
so there's no need to return the register number, espcially since the
lexer explicitly consumes "a0" and "cr0".

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5514>

turnip: move enum translation functions to a common header

Instead of having these functions sprinkled around the driver (and ending
with a duplicated tu6_compare_func for example), move everything to a
common header (using the previously unused tu_util.h).

Also applied some simplifications: using a cast when the HW enum matches
the VK enum, and using a lookup table when it makes sense (which is IMO
nicer than the switch case way).

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5538>

aco: use the same regclass as the definition for undef phi operands

Subdword phis can't have SGPR operands on GFX6-8.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5544>

aco: fix edge check with sub-dword temporaries

Fixes RA failure for a parallel-rdp shader on pitcairn.

fossil-db (Navi):
Totals from 2 (0.00% of 128733) affected shaders:
CodeSize: 203656 -> 205724 (+1.02%)
Instrs: 32267 -> 32529 (+0.81%)

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5544>

mesa/main: fix inverted condition

I accidentally got one of the conditions wrong here. Sorry for the
mixup.

See ttps://gitlab.freedesktop.org/mesa/mesa/-/issues/3134 for details.

Fixes: b112e62ba48 ("mesa/main: do not allow MESA_ycbcr_texture enums on gles")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5532>

nv50/ir/nir: remove image uniform hack

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5480>

nv50/ir/nir: handle image atomic inc and dec

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5480>

nv50/ir/nir: move away from image_deref intrinsics

v2: fix lod source of image operation correctly

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5480>

nir/lower_images: handle dec and inc

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5480>

nir/lower_images: fix for array of arrays

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5480>

st/mesa: lower images when needed

The "st/pbo download FS" builtin shader uses image derefs, so even with
PIPE_CAP_NIR_IMAGES_AS_DEREF set to 0 drivers ended up with those.

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5480>

aco: shrink mad_info

From 24 bytes to 16 bytes.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5281>

aco: make ssa_info::label 64-bit

We'll probably need these extra bits in the future.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5281>

aco: shrink ssa_info

Reorder members so that it's 16 bytes instead of 24.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5281>

radeon/vcn: bump vcn3.0 encode major version to 1

And add quality params for this version

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5501>

radeon/vcn/enc: Re-write PPS encoding for HEVC

Due to hardware change on VCN3

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5501>

radeon/vcn: add vcn 3.0 encode support

Signed-off-by: Thong Thai <thong.thai@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5501>

radeon/vcn/dec: add db_aligned_height to message buffer

This is required for Sienna

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5501>

radeon/vcn: add Sienna to use internal register offset

And re-group them explicitly

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5501>

radeon/vcn: reset the decode flags from message buffer

This flag was never used by VCN previously, and now
it's used for feature that is not applied to us.

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5501>

aco: fix WQM handling in nested loops

If on a nested loop
- the outer loop needs WQM but
- the inner loop doesn't need WQM and
- the break condition of the inner loop is computed in the outer loop
then it could happen that we transitioned to Exact before entering the inner loop
which could create an empty exec mask and lead to an infinite loop.

Fixes a GPU hang with RDR2

Cc: 20.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5518>

st/mesa: account for "loose", per-mipmap level textures in CopyImageSubData

We may have "loose", per-image gallium resources. The src_image->Level
may not match the gallium resource texture level. In such case it is
prescribed (in st_AllocTextureImageBuffer) to specify mipmap level
as zero.

Fixes: f04f13622f3e71bee057d60a6be9c53b92b56cc9
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5477>

virgl: apply bgra dest swizzle and add Portal 2

Apply the destination swizzle on GLES games based on HL2 engine.
Also add Portal 2 since some people are experiencing issues with
that.

Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5481>

turnip: set the API version

Some CTS tests don't run because of this.

Fixes: 91c757b7963f458 ("turnip: use the common code for generating extensions and dispatch tables")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5522>

radv: only requires LLVM 9 for GFX10 if not using ACO

In case someone links RADV with LLVM 8 and wants to use ACO.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5454>

Revert "CI: Disable Panfrost Mali-T820 jobs"

This reverts commit 46a32f0b6bf91279d001a4905babe4e50007696e.

The lab has recovered health, thus re-enable T820 Panfrost jobs.

Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4727>

Revert "CI: Disable Lima jobs due to lab unhealthiness"

This reverts commit adeef43d15092a6910dceb3605f5ee3151dd2c47.

The lab has recovered health, thus re-enable Lima jobs.

Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4727>

radv: compute CB_SHADER_MASK from the fragment shader outputs

The fragment shader doesn't necessarily output the number of components
expected by the target format.

Fixes new dEQP-VK.draw.output_location.*.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5427>

radv: make sure to set CB_SHADER_MASK correctly for internal CB operations

It should be always set to 0xf.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5427>

docs/features: remove driver-list for forward-compatible context

This is something that's supported by the Gallium state-tracker, there's
nothing to be done per driver here.

docs/features: update ARB_texture_buffer_object line

This extension isn't just exposed in OpenGL 3.1 contexts any longer, and
Zink supports it. Let's mark it as such.

docs/features: mark GL3 as complete for zink

radv: lower discards to demote to workaround a RDR2 game bug

This fixes some sort of LOD issue.

Cc: 20.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5525>

glsl_to_nir: fix vote_any/vote_all

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5505>

glsl_to_nir: fix shader_clock

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5505>

glsl_to_nir: fix is_helper_invocation

Reported-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5505>

spirv: drop some dead code

This case is never hit, we don't have a nir intrinsic for this spirv
opcode.  And when we do, I'm not sure if it would be vectorized or not.
So best just to drop this case.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5505>

spirv: atomic_counter_read_deref is not vectorized

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3141
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5505>

turnip: fix renderpass gmem configs when there are too many attachments

Since a value of at least "align" is used for nblocks, we might end up
with nblocks greater than the number of GMEM blocks remaining. Check for
this case and bail out, sysmem rendering will be used for such cases.

Fixes some of these tests:
dEQP-VK.pipeline.render_to_image.core.*.huge.*

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5499>

turnip: fix a sample shading case

Check pipeline's sampleShadingEnable to enable sample shading.

Also fix behavior of gl_Fragcoord with sample shading.

Fixes at least:
dEQP-VK.pipeline.multisample.min_sample_shading.min_0_5.samples_4.primitive_triangle

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5499>

turnip: fix a crash when rasterizerDiscardEnable is set

pMultisampleState needs to be ignored when rasterizerDiscardEnable, so the
current code can crash when trying to load msaa_info->pNext.

At the same time this simplifies tu_pipeline_shader_key_init a bit, by not
calling it for the compute shader case (which doesn't need to set anything
in the key struct).

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5499>

docs: remind release maintainers to sign the tarballs and publish their key

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2857>

docs: publish our release maintainers' keys

They should be published to various key servers as well, but this
provides the authoritative source for their list.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2140
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2857>

freedreno/ir3: update obsolete comment

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

freedreno/computerator: MERGEDREGS update

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

turnip: set .MERGEDREGS based on variant

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

freedreno/a6xx: set .MERGEREGS based on variant

Also set HALFREGFOOTPRINT, since in the non-mergeregs case this will be
non-zero.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

freedreno/ir3: make mergedregs a property of the variant

Rather than assuming a6xx+ means mergedregs.  We can actually (mostly?)
do splitregs on a6xx as well.  And GS/DS/HS currently require it, which
might be papering over a bug, or might be something to do with how
chaining shaders works.  At any rate, we should at least be consistent,
and not have the compiler thinking we are doing mergedregs when we are
actually doing splitregs.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

freedreno/ir3: re-work assembler API

Just pass thru the variant, since it has everything we need.  And
will be needed in the next patch.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

freedreno/ir3: pass variant to postsched

Prep for the next patch.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

freedreno/ir3: decouple regset from gpu gen

Allow different regset's to coexist, so we can make mergedregs vs split
reg file a variant property.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

freedreno/ir3: move mergedreg state out of reg

It is only needed one place, let's move it there.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

freedreno/ir3: convert regmask_t to struct

Prep to make merged/split register file mode a property of the regmask,
rather than the ir3_register.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5458>

freedreno/fdl6: rework layout code a bit (reduce linear align to 64 bytes)

Reduce linear alignment, and rework the layout code a bit.

This rework has a side effect of also increasing the alignment on linear
levels of tiled (non-ubwc) cpp=1 and cpp=2 layouts. Since we should be
UBWC for those cases anyway, its not a big loss.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5013>

freedreno/a6xx: FETCHSIZE is PITCHALIGN

"FETCHSIZE" is actually a "minimum pitch" or "pitchalign" value that's
relevant for mipmaps. The 0 value means 64-bytes. Understanding this allows
some simplifications and will make it possible to use less alignment on
linear formats.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5013>

virgl: replace all dup() with os_dupfd_cloexec()

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5369>

svga: replace all dup() with os_dupfd_cloexec()

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5369>

freedreno: replace all dup() with os_dupfd_cloexec()

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5369>

etnaviv: replace all dup() with os_dupfd_cloexec()

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5369>