radeon/uvd: add YUYV format support for target buffer

Make chroma plane optional for YUYV support

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: reallocate surface when interlaced

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/video: MJPEG not support stacked video buffers

So we have to detect it for reallocation of de-interlaced buffers

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: make surface allocate functions more usefully

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/uvd: reconstruct MJPEG bitstream

The current tier 1 mjpeg firmware only supports at the bitstream
level, the later tier 2 support will be at the buffers level with
newer hardware.

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

st/va: add slice parameter handling for MJPEG

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: add huffman table handling for MJPEG

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: add iq matrix handling for MJPEG

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: add picture parameter handling for MJPEG

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: add handles for MJPEG Buffers

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: create decoder for MJPEG format

Mjpeg doesn't need reference

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: add MJPEG picture to context

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/video: add MJPEG support

v2: add ASIC and Kernel version check

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/uvd: add MJPEG support

There is no need of dpb buffer for mjpeg codec

v2: check dpb_size instead of format

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/uvd: add MJPEG stream type

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

vl: add MJPEG picture description

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

vl: add MJPEG profile and format

v2: move util video change to here

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/uvd: get the target buffer pitch correct for different format

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeonsi: update non-resident bindless descriptors if needed

Only resident bindless descriptors are currently updated and
re-uploaded, this makes sure that the non-resident ones are
also updated.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

dri3: Move up fourcc utility function

It will be needed in next patches.

Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

egl: Add dma_buf_import_modifiers for glvnd

Make sure we advertise the new entrypoints to libglvnd's EGL dispatch.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reported-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101982
Fixes: 4c412293d0e ("egl: advertise EGL_EXT_image_dma_buf_import_modifiers")

intel/blorp: Adjust intra-tile x when faking rgb with red-only

v2 (Jason): Adjust directly in surf_fake_rgb_with_red()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101910

CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

ac/nir: fixup layer/viewport export for GFX9.

GFX9 moved where the viewport index export goes.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965/bufmgr: s/BO_ALLOC_FOR_RENDER/BO_ALLOC_BUSY/

"Alloc for render" is a terrible name for a flag because it means
basically nothing.  What the flag really does is allocate a busy BO
which someone theorized at one point in time would be more efficient if
you're planning to immediately render to it.  If the flag really means
"alloc a busy BO" we should just call it that.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/tex: Change the flags type on create_for_teximage

This matches the actual function declaration.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: only copy requested compressed teximage cubemap faces

This is analogous to commit 2259b11 which only fixed the regular case

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102308
Signed-off-by: Christoph Haag <haagch+mesadev@frickel.club>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

i965/tex: Don't pass samples to miptree_create_for_teximage

In 76e2f390f9863a35, when Topi switched num_samples from 0 to 1 for
single-sampled, he accidentally switched the last parameter in the call
to miptree_create_for_teximage from 0 to 1 thinking it was num_samples
when it was actually layout_flags.  Switching from 0 to 1 added the
MIPTREE_LAYOUT_ACCELERATED_UPLOAD flag which causes us to allocate a
busy BO instead of an idle one.  This caused the subsequent CPU upload
to consistently stall.  The end result was a 15% performance drop in the
SynMark v7 DrvRes microbenchmark.  This restores the old behavior and
fixes the performance regression.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Fixes: 76e2f390f9863a356d1419982dec705260d67eff
Bugzilla: https://bugs.freedesktop.org/102260
Cc: mesa-stable@lists.freedesktop.org

anv: Use ISL for emitting null surface states.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Use ISL for emitting null surface states.

We handle the Sandybridge multisampled 2D surface hack here, rather
than in ISL, because it requires allocating a BO, and is kind of messy.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

isl: Add a null surface fill function.

ISL already offers functions to fill out most kinds of SURFACE_STATE,
so why not handle null surfaces too?

Null surfaces are simple, so we can just take the dimensions, rather
than an entirte fill structure.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Remove tabs in intel_batchbuffer.c.

Our coding style is to use spaces.  Some of this was also messed up
during my bufmgr import series.

(Trivial, just whitespace changes.)

i965/miptree: Return NONE from texture_aux_usage when fully resolved

This little optimization improves the performance of SynMark v7
TexFilterTri by almost 10% on Sky Lake GT4 among other improvements.
We've been doing it for some time but somehow it got dropped during
the miptree refactoring.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/102258
Cc: "17.2" <mesa-stable@lists.freedesktop.org>

i965: Stop looking at NewDriverState when emitting 3DSTATE_URB

Looking at NewDriverState is not safe in general.  The state atom system
is set up to ensure that new bits that get added to NewDriverState get
accumulated into the set of bits used when emitting atoms but it doesn't
go the other way.  If we read NewDriverState, we may not get the full
picture because the per-pipeline state (3D or compute) does not get
added to NewDriverState before state emit is done.  It's especially
dangerous to do this from BLORP (either explicitly or implicitly when
BLORP calls gen7_upload_urb) because that does not happen during one of
the normal state upload paths.

This commit solves the problem by whacking all of the per-shader-stage
URB sizes to zero whenever we change the total URB size.  We still have
to flag BRW_NEW_URB_SIZE to ensure that the gen7_urb atom triggers but
the actual decision in gen7_upload_urb can now be based entirely on URB
sizes rather than on state atoms.  This also makes BLORP correct because
it just asks for a new URB config whenever the vsize is too small and so
any change to the total URB size will trigger blorp to re-emit as well
because 0 < vs_entry_size.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugs.freedesktop.org/102289
Cc: mesa-stable@lists.freedesktop.org

i965: Mark all EGLimages as non-coherent.

EGLimages are shared with external users, and we don't know what they're
going to do with them.  They might scan them out.  They might access
them in a way that doesn't work with our explicit clflushing.

It's safest to simply mark them non-coherent.

Chris Wilson caught this problem and wrote a similar (though less
aggressive) patch to solve it; the miptree code has since undergone
a lot of refactoring so I had to rewrite it.

Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

broadcom/genxml: Add V3D 3.3 packet definitions.

This will be used by the new vc5 gallium driver, and a future Vulkan
driver.

broadcom/genxml: Check the sub-id field when decoding instructions.

VC5 introduces packet variants where the same opcode has behavior that is
decided by a sub-id field in the early bits of the packet.  Keep iterating
over packets until we find the one with the matching sub-id.

broadcom/genxml: Emit code for default headers for structs as well.

In the vc5 NIR backend, I want to use the XML code-generation to set up
pack/unpack of structs for the texture uniforms, and setting up the
unpacked copy needs a default header.

anv: Move a comment that got left behind in the u_vector refactor.

gallium/radeon: remove old_fence parameter from r600_gfx_write_event_eop

just use the new scratch buffer.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi/gfx9: prevent a GPU hang after a timestamp event

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: don't use CLEAR_STATE on SI

This fixes random hangs with Unigine Valley.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102201

Fixes: 064550238ef0 ("radeonsi: use CLEAR_STATE to initialize some registers")
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

Fix build when HAVE_LIBDRM isn't defined

make[4]: Entering directory '/wip/mesa/build/src/gallium/targets/dri'
  CXXLD    gallium_dri.la
../../../../src/gallium/auxiliary/pipe-loader/.libs/libpipe_loader_static.a(libpipe_loader_static_la-pipe_loader.o): In function `pipe_loader_get_driinfo_xml':
/mesa/build/src/gallium/auxiliary/pipe-loader/../../../../../src/gallium/auxiliary/pipe-loader/pipe_loader.c:117: undefined reference to `pipe_loader_drm_get_driinfo_xml'

b4ff5e90 uses pipe_loader_get_driinfo_xml() unconditionally in
pipe_loader.c, but it's definition in pipe_loader_get_driinfo_xml() is only
built if HAVE_LIBDRM.

Arrange to always use the default XML if HAVE_LIBDRM isn't defined.

Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

i965: Fix missing newlines in perf_debug messages.

perf_debug() doesn't append a newline for you.

glsl: add a few missing int64 constant propagation cases

Fixes KHR-GL45.shader_ballot_tests.ShaderBallotAvailability, which
causes some silly swizzles to appear, triggering this optimization to
get hit.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: mesa-stable@lists.freedesktop.org

glsl: set old ldexp operand to NULL when lowering

This fixes an assert during IR validation in LLVMpipe.

Fixes: e2e2c5abd279 (glsl: calculate number of operands in an expression once)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102274
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>

intel/isl: Replace switch statements of doom with a macro

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/isl: Reduce header file duplication

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radv: disable support for VEGA for now.

I'm working on this, but I'm not sure I'll make 17.2 at this stage,
maybe 17.2.1.

Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glxcmds: Fix a typo in the __APPLE__ codepath

s/DummyContext/dummyContext/

Regressed-in: 5d9b50e596c9d81c37ce0844ae0f8c9da3f6bea6
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>

llvmpipe: enable PIPE_CAP_QUERY_SO_OVERFLOW

The driver supported this since way before the GL spec for it existed.
Just need to support both the per-stream and for all streams variants
(which are identical due to only supporting 1 stream).
Passes piglit arb_transform_feedback_overflow_query-basic.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

softpipe: enable PIPE_CAP_QUERY_SO_OVERFLOW

The driver was supposed to support this since way before the GL spec for it
existed, albeit it was apparently broken, so fix and enable it.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

dri: fix typo in comment

Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

configure.ac: Check for expat21 if expat is not found.

Fixes build error on CentOS 6.9.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102052
Fixes: 5c007203b73d ("configure.ac: drop manual detection of expat header/library")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>

configure: Check llvm-config --shared-mode

https://bugs.llvm.org/show_bug.cgi?id=6823 still affects current LLVM.
llvm-config --libs only reports the single shared library if LLVM was
built with -DLLVM_LINK_LLVM_DYLIB=ON. llvm-config --shared-mode reports
"shared" in that case, "static" otherwise (even if LLVM was built with
-DLLVM_BUILD_LLVM_DYLIB=ON).

v2: Keep the LLVM < 4.0 test. (llvm-config --shared-mode is actually
    available since LLVM 3.8, but that would make the test too
    complicated :)

Fixes: 3d8da1f678e1 ("configure: Trust LLVM >= 4.0 llvm-config --libs
                      for shared libraries")
Bugzilla: https://bugs.freedesktop.org/102247
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>

loader_dri3: Make sure we have an updated back v3

With GLX_SWAP_COPY_OML and GLX_SWAP_EXCHANGE_OML it may happen in situations
when glXSwapBuffers() is immediately followed by for example another
glXSwapBuffers() or glXCopyBuffers() or back buffer age querying, that we
haven't yet allocated and initialized a new back buffer because there was
no GL rendering in between.

Make sure that we have a back buffer in those situations.

v2: Eliminate the drawable have_back_format member.
v3: Make sure we re-initialize the back even if it exists.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

loader_dri3: Support GLX_SWAP_EXCHANGE_OML

Add support for the exchange swap method. Since we're now forcing a fake front
buffer and we exchange the back and fake front on swaps, we don't need to add
much code.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

loader_dri3: Eliminate the back-to-fake-front copy

Eliminate the back-to-fake-front copy by exchanging the previous back buffer
and the fake front buffer. This is a gain except when we need to preserve
the back buffer content but in that case we still typically gain by replacing
a server-side blit by a client side non-flushing blit.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

loader_dri3: Remove buffer_type from buffer metadata

It's not used anywhere and now that we're about to exchange back- and
fake fronts it doesn't serve a purpose.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

loader_dri3: Support GLX_SWAP_COPY_OML

Support the GLX_SWAP_COPY_OML method. When this method is requested, we use
the same swapbuffer code path as EGL_BUFFER_PRESERVED.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

loader_dri3: Honor the request to preserve back buffer content

EGL uses the force_copy parameter to loader_dri3_swap_buffers_msc() to indicate
that it wants to preserve back buffer contents across a buffer swap.

While the loader then turns off server-side page-flipping there's nothing to
guarantee that a new backbuffer isn't chosen when EGL starts to render again,
and that buffer's content is of course undefined.

So rework the functionality:
If the client supports local blits, allow server-side page flipping and when
a new back is grabbed, if needed, blit the old back's content to the new back.
If the client doesn't support local blits, disallow server-side page-flipping
to avoid a client deadlock and then, when grabbing a new back buffer, sleep
until the old back is idle, which may take a substantial time depending on
swap interval.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

loader_dri3: Increase the likelyhood of reusing the current swap buffer

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

loader_dri3/glx/egl: Optionally use a blit context for blitting operations

The code was relying on us always having a current context for client local
image blit operations. Otherwise the blit would be skipped. However,
glxSwapBuffers, for example, doesn't require a current context and that was a
common problem in the dri1 era. It seems the problem has resurfaced with dri3.

If we don't have a current context when we want to blit, try creating a private
dri context and maintain a context cache of a single context.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

loader_dri3/glx/egl: Remove the loader_dri3_vtable get_dri_screen callback

It's not very usable since in the rare, but definitely existing case that
we don't have a current context, it will return NULL.

Presumably it will always be safe to use the dri screen the drawable was
created with for operations on that drawable.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

nv50/ir: fix TXQ srcMask

src0.x is always read for the LOD, irrespective of which outputs are
read.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nv50/ir: fix srcMask computation for TG4 and TXF

This affects which inputs are marked as used. In a situation where only
the texture instruction uses an input, it might have been ignored as
unused due to input masks.

Affects subtests of KHR-GL45.texture_cube_map_array.sampling

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

anv/gem: Add a stub for sync_file_merge

This fixes make check

Fixes: 5c4e4932e02164e18cba9ae2cf3ec56afa2f2a6b

radv: disable texture gather workaround on gfx9.

Not required anymore.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

st/mesa: remove Windows hack for glFinish

I see no evidence that opengl32.dll's wglSwapBuffers calls glFinish.
It looks like Jose removed that dependency years ago, but this hack
remained.

Removing this code also fixes the Piglit sync_api test since commit
eceb6710024716.

No piglit regressions.  No glretrace regressions, per Charmaine.
Fixes VMware bug 1937990.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

gallium/os: fix os_time_get_nano() to roll over less

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102241
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

st/wgl: check for negative delta in wait_swap_interval()

This can happen because of rollover.  See bug report for details.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102241
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

st/mesa: fix a null pointer access

Fixes crash with llvmpipe on Windows.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102148
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>

i965: Alphabetize TCS image dirty bits

Trivial.

i965: Always allow CPU readback of the scanout on LLC platforms

LLC platforms are magic in that reads from the CPU are always cache
coherent, or rather GPU writes that bypass LLC do still invalidate the
appropriate cache line.

Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

swr/rast: Fix invalid casting for calls to Interlocked* functions

CID: 1416243, 1416244, 1416255
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

radeon/vce: support all firmwares with major ver 53

The vce firmware interface should now be stable, all firmwares with
major version equals to 53 are supported.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig at amd.com>

i965: make sure check_and_emit_atom gets inlined

Improves performance of 3DMark "Ice Storm Unlimited" benchmark
by 1-2% on Apollolake (on Android-IA using clang 3.8.256229).

Change is based on the performance profiling work and results
by Aravindan Muthukumar and Yogesh Marathe.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Aravindan Muthukumar <aravindan.muthukumar@intel.com>
Signed-off-by: Yogesh Marathe <yogesh.marathe@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

a2xx: only update rasterizer settings when they're there

The rasterizer being empty can happen e.g. during clears

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

a2xx: add logicop support

This passes both gl-1.0-logicop and gl-1.1-xor piglits.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/ast: update rhs in addition to the var's constant_value

We continue in the code to do some more things with the rhs, including
setting a constant initializer. If the type is wrong, this causes some
confusion down the line, leading to assertions. This makes sure that the
rhs processing continues to flow as-if the type was correct to start
with (even though the state has been marked as an error state).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101766
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org

anv: Advertise VK_KHR_external_semaphore

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Use DRM sync objects for external semaphores when available

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv/gem: Add a drm syncobj support

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel/drm: Pull in the i915 fence array API

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Implement support for exporting semaphores as FENCE_FD

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv/gem: Use EXECBUFFER2_WR when the FENCE_OUT flag is set

Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Submit a dummy batch when only semaphores are provided.

Vulkan allows you to do a submit whose only job is to wait on and
trigger semaphores.  The easiest way for us to support that right
now is to insert a dummy execbuf.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Add a basic implementation of VK_KHX_external_semaphore

This patch adds an implementation based on DRM BOs.  We don't actually
advertise the extension yet because we want to add a couple more paths
first.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

clover/event: Include additional event statuses for clSetEventCallback

From CL 2.0 Section 5.11 (Event Objects):
  clSetEventCallback returns CL_SUCCESS if the function is executed successfully. Otherwise, it
  returns one of the following errors:
    ...
    CL_INVALID_VALUE if pfn_event_notify is NULL or if command_exec_callback_type is
    not CL_SUBMITTED , CL_RUNNING or CL_COMPLETE .

Fixes: OpenCL CTS test_conformance/events/test_events callbacks
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

broadcom/vc4: Port NEON-code to ARM64

Changed all register and instruction names, works the same.

v2: Rebase on build system changes (by anholt)
v3: Fix build on clang (by anholt, reported by Rob)

Signed-off-by: Jonas Pfeil <pfeiljonas@gmx.de>
Tested-by: Rob Herring <robh@kernel.org>

broadcom/vc4: Build the vc4_tiling_lt_neon.c with -mfpu=neon on ARM.

If you don't pass this, the compiler refuses to compile the assembly for
pre-v7 CPUs.  This also keeps us from building identical, non-NEON code on
aarch64 and x86.

Fixes: a373f77662c5 ("vc4: Use a wrapper file to set VC4_BUILD_NEON instead of CFLAGS.")
v2: Fix Android build by just appending NEON_C_SOURCES when
    ARCH_ARM_HAVE_NEON.

Tested-by: Rob Herring <robh@kernel.org>

configure.ac: Introduce HAVE_ARM_ASM/HAVE_AARCH64_ASM and the -D flags.

I've been trying to get away without these conditionals in vc4's NEON
code, but it meant compiling extra unused code on x86, and build failing
on ARMv6.

v2: Use the _arm/_arm64 flags to simplify detection (suggested by Rob),
    but hide the _arm version under ARCH_ARM_HAVE_NEON to keep from trying
    to build this stuff for armv5te.

Tested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

util: Fix build on old glibc.

We need to link librt for u_thread.h's clock_gettime() call.

Fixes: b822d9dd67b5 ("gallium/util: move u_queue.{c,h} to src/util")
Reviewed-by: Matt Turner <mattst88@gmail.com>

broadcom: Add v3d_xml.h to gitignore.

broadcom: Add missing libexpat cflags for the decoder.

The Raspbian ARMv6 cross compiler wasn't picking up my (amd64) system copy
of the header the way that the system gcc and armhf cross-compile did.

radv/gfx9: for fast clear use is_linear flag.

The legacy test won't work on gfx9.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: fix tile swizzle handling for gfx9

This sets the tile swizzle up properly for gfx9.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: handle GFX9 opaque metadata

port the opaque metadata changes from radeonsi for gfx9.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: emit db_htile_surface reg on gfx9 as well

This is also a GFX9 register.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: remove some leftover gfx6 descriptor setup.

We set this later in the non-gfx9 path, just remove these
bits from here.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: fix set predication packet.

The predication packet changed format on GFX9, update the driver.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>