git.libre-soc.org Git - buildroot.git/log

ghostscript: security bump to version 9.25

Fixes the following security issues:

- CVE-2018-16543: In Artifex Ghostscript before 9.24, gssetresolution and
  gsgetresolution allow attackers to have an unspecified impact

- CVE-2018-17183: Artifex Ghostscript before 9.25 allowed a user-writable
  error exception table, which could be used by remote attackers able to
  supply crafted PostScript to potentially overwrite or replace error
  handlers to inject code.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: bump version for post-2.28 fixes

Carlos O'Donell (1):
      Fix tst-setcontext9 for optimized small stacks.

DJ Delorie (3):
      RISC-V: Fix rounding save/restore bug.
      Regen RISC-V rvd ULPs
      Improve ChangeLog message.

Florian Weimer (6):
      Linux: Rewrite __old_getdents64 [BZ #23497]
      error, error_at_line: Add missing va_end calls
      nscd: Deallocate existing user names in file parser
      nss_files: Fix file stream leak in aliases lookup [BZ #23521]
      regex: Add test tst-regcomp-truncated [BZ #23578]
      misc: New test misc/tst-gethostid

H.J. Lu (1):
      i386: Use ENTRY and END in start.S [BZ #23606]

Martin Kuchta (1):
      pthread_cond_broadcast: Fix waiters-after-spinning case [BZ #23538]

Mingli Yu (1):
      Linux gethostid: Check for NULL value from gethostbyname_r [BZ #23679]

Paul Eggert (1):
      regex: fix uninitialized memory access

Samuel Thibault (2):
      hurd: Add missing symbols for proper libc_get/setspecific
      hurd: Avoid PLTs for __pthread_get/setspecific

Stefan Liebler (1):
      Fix segfault in maybe_script_execute.

Wilco Dijkstra (1):
      Fix strstr bug with huge needles (bug 23637)

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-psutil: bump to version 5.4.7

Also add license hash.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-lmdb: bump to version 0.94

Also add license hash.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-jinja2: bump to version 2.10

Also add license hash.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-incremental: bump to version 17.5.0

Also add license hash.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-hyperlink: bump to version 18.0.0

Also add license hash.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-automat: bump to version 0.7.0

Also add license hash.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-autobahn: bump to version 18.9.2

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-attrs: bump to version 18.2.0

Also add license hash.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

haproxy: new package

HAProxy is a free, very fast and reliable solution offering
high availability, load balancing, and proxying for TCP and
HTTP-based applications.

http://www.haproxy.org

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ltp-testsuite: Bump to version 20180926

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

e2fsprogs: fix musl compile (__GNUC_PREREQ related)

Add void-linux provided patch to use __GNUC_PREREQ macro only
in case it is defined (patch taken from [1]).

Fixes [2]:

  In file included from ../../lib/ext2fs/ext2fs.h:97:0,
                   from feature.c:20:
  ../../lib/ext2fs/hashmap.h:20:19: error: missing binary operator before token "("
   #if __GNUC_PREREQ (4, 8)
                     ^
  ../../lib/ext2fs/hashmap.h:25:19: error: missing binary operator before token "("
   #if __GNUC_PREREQ (4, 8)
                     ^

Problem already upstream reported by Baruch Siach (see [3]).

[1] https://raw.githubusercontent.com/void-linux/void-packages/1f3b51493031cc0309009804475e3db572fc89ad/srcpkgs/e2fsprogs/patches/fix-glibcism.patch
[2] http://autobuild.buildroot.net/results/e49d9333086ed714fa193b79b49c53e9cc511fec
[3] https://www.spinics.net/lists/linux-ext4/msg62290.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-firmware: bump version and fix hash

Bump the package to the most up to date version and fix the sha256 hash.
linux-firmware was failing due to an incorrect sha256 hash, as follows:

Fetching all references
warning: redirecting to https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/
remote: Counting objects: 6972, done.
remote: Total 6972 (delta 0), reused 0 (delta 0)
Receiving objects: 100% (6972/6972), 196.63 MiB | 4.22 MiB/s, done.
Resolving deltas: 100% (4516/4516), done.
>From http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware
* [new branch]      master     -> origin/master
warning: redirecting to https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/
warning: refname '8d69bab7a3da1913113ea98cefb73d5fa6988286' is ambiguous.
Git normally never creates a ref that ends with 40 hex characters
because it will be ignored when you just specify 40-hex. These refs
may be created by mistake. For example,

  git checkout -b $br $(git rev-parse ...)

where "$br" is somehow empty and a 40-hex ref is created. Please
examine these refs and maybe delete them. Turn this message off by
running "git config advice.objectNameWarning false"
ERROR: linux-firmware-8d69bab7a3da1913113ea98cefb73d5fa6988286.tar.gz has wrong sha256 hash:
ERROR: expected: 905be20e4e2d7628dea4e2e99195520fc0cce8b247faabdc52fc44a3ff2ceb04
ERROR: got     : b9fce72a7b0b55eb311701dfd47914bc9e037134fa401d33e6e73ab9ebc9d116
ERROR: Incomplete download, or man-in-the-middle (MITM) attack

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

quazip: upgrade to 0.7.6

Signed-off-by: Zoltan Gyarmati <zgyarmati@zgyarmati.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/pc: bump kernel version

Bump the kernel version to 4.18.10.
Tested with qemu 2.11.2 on bios and UEFI virtual machines.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nilfs-utils: drop NPTL dependency

The latest uClibc-ng version (1.0.30) provides clock_nanosleep() even
for non NPTL configurations.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nilfs-utils: no comment if BR2_USE_MMU is true

Don't display comment if BR2_USE_MMU is true
Moreover, move BR2_USE_MMU dependency at the top of dependency list

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sedutil: new package

Utilities to configure self encrypting drives that comply with the TCG OPAL
2.00 standard.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireguard: bump version to 0.0.20180925

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ncmpc: fix build with gcc 4.9

Add upstream patch to fix build on gcc 4.9

Fixes:
- http://autobuild.buildroot.org/results/e3b1b1bdad841c151b70294d517dc75c5305b0fe

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

chrony: fix build failure due to missing inclusion of util.h

During build package stops with linker error:
hash_intmd5.o: In function `HSH_Hash':
hash_intmd5.c:(.text+0x963): undefined reference to `MIN'

This is due to missing util.h inclusion.
util.h contains MIN() macro definition.

Add upstream patch:
https://git.tuxfamily.org/chrony/chrony.git/commit/?id=948ecf84314f78da82e0e2b07b6570ca9cff86c8
to add #include "util.h" in hash_intmd5.c

Fixes:
http://autobuild.buildroot.net/results/8f0/8f0d53b1d5a899e56540c859b908cbc1eaa223d5/
http://autobuild.buildroot.net/results/3c6/3c609f94aff182c9ab47ef8ec4b9de03a4d20ffb/
http://autobuild.buildroot.net/results/f1f/f1fcae399fb640c19cf88c9333a92cbfab547932/

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: add myself for python-lxml

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9, 14, 18}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.18.10

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccache: bump to version 3.4.3

Update LICENSE.adoc: change was zlib and year bump.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-lxml: bump to version 4.2.5

Also add hashes for license files.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

cppzmq: bump to version v4.3.0

- move to cmake-infrastructure
- add patch to fix install without static libzmq
- add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

domoticz: depends on gcc >= 4.8

sleep_for is not always defined with gcc <= 4.7, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52680

To fix this issue, add a dependency to gcc >= 4.8

Fixes:
- http://autobuild.buildroot.net/results/0dada8dd727f32a4500670f6620adb05943ed0b7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

xlib_libXdmcp: add missing dependency on host-pkgconf

The libXdmcp configure script uses pkg-config, but the Buildroot
package does not depend on host-pkgconf. This is not seen by the
autobuilders most likely because another package that is always built
before libXdmcp builds pkg-config.

However, running:

$ make xlib_libXdmcp

triggers the following build failure:

checking pkg-config is at least version 0.9.0... ./configure: line 12323: /home/thomas/projets/buildroot/output/host/bin/pkg-config: No such file or directory
no
[...]
checking for XDMCP... configure: error: in `/home/thomas/projets/buildroot/output/build/xlib_libXdmcp-1.1.2':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.

This was detected using per-package target/host folders, because with
this, only the dependencies explicitly expressed by a package are
available to the package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-rtsp-server: add missing license file hash

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-plugins-bad: add missing license file hash

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-plugins-base: add missing license file hash

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst-omx: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gstreamer1-editing-services: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-rtsp-server: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-vaapi: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-libav: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-validate: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-plugins-ugly: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-plugins-bad: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-plugins-good: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-plugins-base: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gstreamer1: bump version to 1.14.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

minizip: bump to version 2.5.3

- Move to cmake infrastructure
- Do not enforce zlib dependency
- Add optional bzip2 dependency
- Add mandatory host-pkgconf and libbsd dependency
- Remove miniunzip from Config.in, miniunzip (miniunz) has been merged
with minizip:
https://github.com/nmoinvaz/minizip/commit/a66cc31fac61e47a34bced08569ddec38b81bbef
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/scancpan: refactor license name adjustment

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

webkitgtk: add dependency on the woff2 package

The woff2 dependency is used to support Web fonts in WOFF2 format.
This is a Web-facing feature that Web sites expect WebKit to support,
and it is recommended to be unconditionally enabled. While it is
possible to disable the feature at build time, upstream only recommends
doing so if the target system cannot provide a woff2 package.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

webkitgtk: bump to version 2.22.2

Release notes:

    https://webkitgtk.org/2018/09/03/webkitgtk2.22.0-released.html
    https://webkitgtk.org/2018/09/20/webkitgtk2.22.1-released.html
    https://webkitgtk.org/2018/09/21/webkitgtk2.22.2-released.html

No corresponding security advisories for 2.22.x have been published.
Nevertheless, due to skipping over versions in the 2.20.x series,
the following 2.20.x advisories apply:

    https://webkitgtk.org/security/WSA-2018-0003.html
    https://webkitgtk.org/security/WSA-2018-0004.html
    https://webkitgtk.org/security/WSA-2018-0005.html
    https://webkitgtk.org/security/WSA-2018-0006.html

This also bumps the required GCC version, due to the WebKit code
now using more modern C++ features which were introduced in version
6.x of the compiler. The dependency is propagated to the midori
package as well. Last but not least, BR2_PACKAGE_WEBP_DEMUX and
BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MPEGTSDEMUX are selected as
they are unconditionally needed by the newer WebKitGTK+ releases
when multimedia support is enabled.

An upstream patch for 32-bit ARM which did not make it to be included
in this new version is included as well, and can be removed once it
gets picked in a new release.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

irqbalance: bump to version 1.4.0

- Add hash for license file
- Add optional ncurses and systemd dependencies
- Remove --without-glib2 option, see:
https://github.com/Irqbalance/irqbalance/commit/1d2f6a9b6c6ef3b195f28af5f0271cf83ed02818

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

irqbalance: add optional libcap-ng dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

irqbalance: add mandatory libglib2 dependency

If libglib2 is not found or disable through --without-glib2, irqbalance
will use its own implementation of glib2 so add a mandatory libglib2
dependency especially as upstream now enforce it:
https://github.com/Irqbalance/irqbalance/commit/1d2f6a9b6c6ef3b195f28af5f0271cf83ed02818

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

irqbalance: add optional numactl dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xutil_makedepend: add missing dependency on host-pkgconf

The configure script of xutil_makedepend uses PKG_CHECK_MODULES(), so
it should depend on host-pkgconf. Otherwise, a "make
host-xutil_makedepend" fails with:

"""
checking for X... configure: error: in `/home/thomas/projets/buildroot/output/build/host-xutil_makedepend-1.0.5':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.

Alternatively, you may set the environment variables X_CFLAGS
and X_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

To get pkg-config, see <http://pkg-config.freedesktop.org/>.
"""

This was detected using per-package host/target directories, but can
be reproduced without it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

xlib_libxshmfence: drop AUTORECONF

In commit 2524acd4179fccc627a72ff188bf51c95fed9867
("package/x11r7/xlib_libxshmfence: bump version to 1.3"), the patch
0001-configure.ac-call-AC_USE_SYSTEM_EXTENSIONS.patch was dropped, but
the corresponding AUTORECONF = YES was not dropped.

This causes a build issue if just xlib_libxshmfence is built (using
"make xlib_libxshmfence" or using per-package host/target directories):

  >>> xlib_libxshmfence 1.3 Autoreconfiguring
  configure.ac:40: error: must install xorg-macros 1.3 or later before running autoconf/autogen
  configure.ac:40: the top level

This commit fixes that by dropping the no longer needed
AUTORECONF = YES.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-waf: properly escape HOST_DIR when defining <pkg>_WAF

When <pkg>_NEEDS_EXTERNAL_WAF is set to YES, <pkg>_WAF is set to
$(HOST_DIR)/bin/waf within the inner-waf-package macro. This reference
to $(HOST_DIR) should use $$(HOST_DIR) so that it is properly expanded
at the time of use, and not at the time of the macro expansion.

In the current Buildroot, this doesn't cause any visible problem
because $(HOST_DIR) points to the same directory for all
packages. However, with per-package host/target directories, this is
no longer the case. It causes a build issue because it tries to use
"waf" from the global host directory, which doesn't exist during the
build.

This commit fixes the following build issue with per package
host/target directories:

/home/test/autobuild/run/instance-2/output/per-package/mpv/host/bin/python2: can't open file '/home/test/autobuild/run/instance-2/output/host/bin/waf': [Errno 2] No such file or directory
make: *** [/home/test/autobuild/run/instance-2/output/build/mpv-0.27.2/.stamp_configured] Error 2

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

numactl: bump to version 2.0.12

- README has been renamed into README.md so update NUMACTL_LICENSE_FILES
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

imlib2: bump to version 1.5.1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

imlib2: update license

- Use SPDX short identifier (Imlib2) instead of full name
- Add COPYING-PLAIN to license files
- Add hash for license files

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package: clean up remaining references to $(HOST_DIR)/usr

Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

iputils: Add hash for ninfod/COPYING license file

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

iputils: Bump to version s20180629

Add upstream patch to fix build error:
ping.c: In function ‘main’:
ping.c:212:23: error: ‘AI_CANONIDN’ undeclared (first use in this function); did you mean ‘AI_CANONNAME’?
hints.ai_flags &= ~ AI_CANONIDN;

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

netsniff-ng: bump to version 0.6.5

Cc: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

sqlite: bump to version 3.25.1

Make use of https for sqlite.org.

Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libesmtp: update/fix site URL

The old URL was not working for quite some time.

Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/qemu_riscv64_virt: new defconfig

Add RISC-V 64-bit defconfig for QEMU virt machine.

Tested with QEMU 2.12.1

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/riscv-pk: add bootloader for RISC-V architecture

Add the RISC-V Proxy Kernel (pk) package which provides the Berkeley
Boot Loader for booting RISC-V kernel images.

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- fix prompt of option to be just "riscv-pk"
- add blank line between help text and upstream URL in Config.in file
- use $(INSTALL) instead of cp to install the generated image]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch: add support for RISC-V 64-bit (riscv64) architecture

This enables a riscv64 system to be built with a Buildroot generated
toolchain (gcc >= 7.x, binutils >= 2.30, glibc only).

This configuration has been used to successfully build a qemu-bootable
riscv-linux-4.15 kernel (https://github.com/riscv/riscv-linux.git).

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- simplify arch.mk.riscv by directly setting GCC_TARGET_ARCH
- simplify glibc.mk changes by using GLIBC_CONF_ENV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

glibc: move autoconf cache variables to GLIBC_CONF_ENV

glibc is not using the autotools-package infrastructure, so we are
calling the ./configure script manually. Currently, the few autoconf
cache variables are passed as arguments to the ./configure script,
while we pass them through the environment in the autotools-package
infrastructure.

So let's pass them in the environment, and use a GLIBC_CONF_ENV
variable to store them. This will allow in a follow-up commit to
conditionally add more autoconf cache variables to the glibc build.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch/arch.mk: fix check-package warnings

"make check-package" is not happy with the formatting of the recently
introduced arch.mk:

arch/arch.mk:1: should be 80 hashes (http://nightly.buildroot.org/#writing-rules-mk)
arch/arch.mk:2: should be 1 hash (http://nightly.buildroot.org/#writing-rules-mk)
arch/arch.mk:4: should be 1 hash (http://nightly.buildroot.org/#writing-rules-mk)
arch/arch.mk:5: should be 80 hashes (http://nightly.buildroot.org/#writing-rules-mk)
arch/arch.mk:6: should be a blank line (http://nightly.buildroot.org/#writing-rules-mk)

Let's fix this by adding a comment header that makes check-package
happy.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

at: add sha256 for legal-info files

Copyright and COPYING file sha256 are missing.

Add them calculating locally.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

at: change upstream site, bump version

At is now available on a git repository at:
https://salsa.debian.org/debian/at

Main changes 3.1.16 -> 3.1.23:
- add support for SELinux, multiple files
- improve atd.service, see bug report 892819
- fix various bugs and warnings
- finalized script to release software

So:
- change AT_SITE_METHOD to git pointing to release/3.1.23
- update tarball sha256 in hash file
- improved S99at script:
  if /var/spool is linked to /tmp, .SEQ file will be lost and atd won't
  work neither for a live session. Create .SEQ file if not found, warning
  during start that after reboot atjobs could be lost.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch: allow GCC target options to be optionally overwritten

The BR2_GCC_TARGET_* configuration variables are copied to
corresponding GCC_TARGET_* variables which may then be optionally
modified or overwritten by architecture specific makefiles.

All makefiles must use the new GCC_TARGET_* variables instead
of the BR2_GCC_TARGET_* versions.

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: simplify include of arch/arch.mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-headers: add support for fetching from custom tarball/git

Add support for building toolchains against custom headers. Allows
the selection of a manual version, custom tarball or custom git
repository for the kernel headers. This enables toolchains to be
built against custom kernel headers without having to build a full
kernel.

This is particularly useful for new architectures, such as RISC-V
where updated kernel headers may not have made it into the mainline
kernel yet.

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux-headers: prepare to support custom tarball/git

This commit reworks how linux-headers.mk is written to prepare adding
support for custom tarball/git fetching for the Linux kernel headers.

Basically, the idea is to have a single condition at the beginning of
the file that defines a number of LINUX_HADERS_* variables depending
on whether "kernel headers same as kernel" is used or not, and then
use these variables in the rest of the .mk file.

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: split from the original patch "package/linux-headers: add
support for custom headers" from Mark. The commit log is entirely
mine.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: add hash file

Added a hash file for the Linux kernel. Hashes have been copied
from the appropriate sha256sums.asc files on kernel.org.
The Linux hash file is also shared with the linux-headers package
via a symbolic link.

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: update hashes with recent linux-headers changes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

chrony: bump to version 3.4

Patch 0002-util-fall-back-to-reading-dev-urandom-when-getrandom.patch
was applied upstream in this version, so it can be deleted.

Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libuv: bump to version 1.23.1

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

igmpproxy: bump to version 0.2.1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

igmpproxy: fix license

mrouted part of igmpproxy is licensed under BSD-3-Clause so add this in
IGMPPROXY_LICENSE and add hash for license files

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

busybox: bump version to 1.29.3

Remove 0003-Revert-libbb-remove-unnecessary-variable-in-xmalloc_.patch
It caused a segfault which was fixed in this release.

Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

dvblast: bump to version 3.3

Add hash for license files

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

dvblast: drop NPTL dependency

The latest uClibc-ng version (1.0.30) provides clock_nanosleep() even
for non NPTL configurations.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libnfs: fix license and add hashes for license files

As specified in COPYING, examples are licensed under GPL-3.0+ and .x
files are licensed under BSD-2-Clause.

So update LIBNFS_LICENSE, add COPYING, LICENCE-BSD.txt and
LICENCE-GPL-3.txt to LIBNFS_LICENSE_FILES and add hash for all license
files

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

ncmpc: bump to version 0.31

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

can-utils: drop NPTL dependency

The latest uClibc-ng version (1.0.30) provides clock_nanosleep() even
for non NPTL configurations.

Don't keep a dependency on threads as can-utils doesn't need it

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

monkey: add license file hash

Cc: Morgan Delestre <m.delestre@sinters.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

monkey: switch to cmake package

Since version 1.6.x the configure script is a wrapper around cmake. Use
cmake directly since we want to make sure that cmake is available.

monkey no longer provides the libmonkey.so shared library. Remove the
BR2_PACKAGE_MONKEY_SHARED option.

Fixes:
http://autobuild.buildroot.net/results/b07/b077720c16857b752f4f38b73619a6a62862f35f/
http://autobuild.buildroot.net/results/799/799bcbd332f254fbf3d3547e5e52ac9463d58bcc/
http://autobuild.buildroot.net/results/3b0/3b095ca77a900af724fbc79d9cc20cbb9931fe15/

Cc: Morgan Delestre <m.delestre@sinters.fr>
Cc: David Pierret <david.pierret@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libxslt: point to the correct xml2-config location

Currently libxslt configure finds native /usr/bin/xml2-config.

Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-setuptools: use pypi package

The releases on Github produces a setuptools version that isn't PEP518
compliant because a .post number is attached to the .egg file
(IE: 40.0.0.post20180820) which can cause a python package using setuptools
to fail if looking for a setuptools version.

Instead, using the official release from pypi is recommended as it does not
produce a .post version on the egg file.

Another benefit is not having to run bootstrap.py either.

See https://github.com/pypa/setuptools/issues/1462 for more details about
the issue

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

blktrace: drop NPTL dependency

The latest uClibc-ng version (1.0.30) provides clock_nanosleep() even
for non NPTL configurations.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

xfsprogs: bump to version 4.18.0

- Update second patch because crc32 moved from libxfs to libfrog:
  https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git/commit/?id=973de649842b6f96db32e5060b62e8fbcc05f033
- Update XFSPROGS_LICENSE_FILES because doc/COPYING has been replaced by
  LICENSES/GPL-2.0 and LICENSES/LGPL-2.1, see:
  https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git/commit/?id=959ef98176005b1aa69619dd76b1d46cf112dfc4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/check-package: detect the use of ${} in .mk files

And warn to use $() instead.
For examples see [1] and [2].

In the regexp, search for ${VARIABLE} but:
- ignore comments;
- ignore variables to be expanded by the shell "$${}".

[1] http://lists.busybox.net/pipermail/buildroot/2018-July/225211.html
[2] https://github.com/buildroot/buildroot/commit/36305380db1312442623128689fe5067d9058381

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

scancpan: skip Dist::Zilla

Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/scancpan: support more licenses

Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

tinycbor: fix undefined encode_half in json2cbor

encode_half has been moved from compilersupport_p.h to cborinternal_p.h
in commit
https://github.com/intel/tinycbor/commit/bfc40dcf909f1998d7760c2bc0e1409979d3c8cb
so include this file in json2cbor to avoid the following build failure
on tinycbor 0.5.2:

/home/buildroot/autobuild/run/instance-0/output/host/bin/microblazeel-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I./src -std=gnu99 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os    -c -o tools/json2cbor/json2cbor.o tools/json2cbor/json2cbor.c
tools/json2cbor/json2cbor.c: In function 'decode_json_with_metadata':
tools/json2cbor/json2cbor.c:295:50: warning: implicit declaration of function 'encode_half' [-Wimplicit-function-declaration]
                                          (half = encode_half(v), cbor_encode_half_float(encoder, &half));
                                                  ^~~~~~~~~~~
/home/buildroot/autobuild/run/instance-0/output/host/bin/microblazeel-linux-gcc -o bin/json2cbor  tools/json2cbor/json2cbor.o lib/libtinycbor.so -lcjson -lm
tools/json2cbor/json2cbor.o: In function `decode_json_with_metadata':
(.text+0xe54): undefined reference to `encode_half'
collect2: error: ld returned 1 exit status
Makefile:151: recipe for target 'bin/json2cbor' failed

Fixes:
- http://autobuild.buildroot.net/results/afd8d24f2a4e501264abff618cf421d4bd088ebf

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

cppcms: bump to version 1.2.1

cppcms is now licensed under MIT so update license and add hash for
MIT.TXT

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

cppcms: fix license

cppcms contains embedded third party software so add
THIRD_PARTY_SOFTWARE.TXT to CPPCMS_LICENSE_FILES as well as the
additional licenses to CPPCMS_LICENSE.
Also add hash for COPYING.TXT and THIRD_PARTY_SOFTWARE.TXT

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>