Ulrich Weigand [Fri, 14 Oct 2016 13:04:04 +0000 (15:04 +0200)]
Fix set sysroot command on AIX
set sysroot command on AIX has no effect if a program depends on shared
library archives (.a). Fixed by using solib_find and solib_bfd_fopen
instead of gdb_bfd_open in solib_aix_bfd_open.
gdb/
2016-10-14 Sangamesh Mallayya <sangamesh.swamy@in.ibm.com>
Ulrich Weigand <uweigand@de.ibm.com>
* solib-aix.c (solib_aix_bfd_open): Call solib_find so that sysroot
path is set properly if program has a dependency on .a archive and
sysroot is set via set sysroot command.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Alan Modra [Fri, 14 Oct 2016 10:47:54 +0000 (21:17 +1030)]
Add separate debug info file section
* scripttempl/DWARF.sc: Add .debug_addr.
Claudiu Zissulescu [Thu, 13 Oct 2016 13:01:19 +0000 (15:01 +0200)]
[ARC] Disassembler: fix LIMM detection for short instructions.
The ARC (short) instructions are using a special register number to
indicate is the instruction uses a long immediate (LIMM). In the case
of short instruction, this LIMM indicator depends on the ISA version
used. Thus, for ARCv1 processors, the LIMM indicator is 0x3E, the same
value used in "long" instructions. However, for the ARCv2 processors,
this LIMM indicator is 0x1E.
This patch fixes the LIMM detection for ARCv1 ISA and adds two tests.
gas/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/shortlimm_a7.d: New file.
* testsuite/gas/arc/shortlimm_a7.s: Likewise.
* testsuite/gas/arc/shortlimm_hs.d: Likewise.
* testsuite/gas/arc/shortlimm_hs.s: Likewise.
include/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (ARC_OPCODE_ARCV2): New define.
opcodes/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (find_format_from_table): Discriminate LIMM indicator
usage on ISA basis.
Markus Metzger [Thu, 13 Oct 2016 14:09:41 +0000 (16:09 +0200)]
btrace: remove leftover comment
Remove a leftover comment on a function that was removed with commit
0568462bbf0f666d5bf9f720e16147da71eec46a.
Eli Zaretskii [Fri, 14 Oct 2016 07:08:25 +0000 (10:08 +0300)]
Include strings.h where available
gdb/ChangeLog
2016-10-14 Eli Zaretskii <eliz@gnu.org>
* common/common-defs.h [HAVE_STRINGS_H]: Include strings.h if
available, to get prototypes of 'strcasecmp' and 'strncasecmp'.
GDB Administrator [Fri, 14 Oct 2016 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Thu, 13 Oct 2016 16:59:26 +0000 (17:59 +0100)]
ARI: Remove true/false checks
These don't make sense with C++.
gdb/ChangeLog:
2016-10-13 Pedro Alves <palves@redhat.com>
* contrib/ari/gdb_ari.sh (boolean): Suggest bool instead.
(false, true): Remove checks.
Yao Qi [Thu, 13 Oct 2016 15:08:17 +0000 (16:08 +0100)]
Share proc get_var_address
This patch moves proc get_var_address into lib/gdb.exp, and remove the
duplicate copy in gdb.base/*.exp files.
gdb/testsuite:
2016-10-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/code_elim.exp (get_var_address): Remove.
* gdb.base/relocate.exp: Likewise.
* gdb.base/shreloc.exp: Likewise.
* lib/gdb.exp (get_var_address): New.
Yao Qi [Thu, 13 Oct 2016 10:10:25 +0000 (11:10 +0100)]
Skip testing structures with floating points
This patch skips some tests related to floating point in structs.exp
if gdb_skip_float_test return false.
gdb/testsuite:
2016-10-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/structs.exp: Invoke gdb_skip_float_test, and do
floating point tests if $skip_float_test is false.
Tom Tromey [Sun, 25 Sep 2016 03:28:52 +0000 (21:28 -0600)]
Use std::string in macho_symfile_read_all_oso
This changes macho_symfile_read_all_oso to use std::string. This
avoids a cleanup.
2016-10-12 Tom Tromey <tom@tromey.com>
* machoread.c (macho_symfile_read_all_oso): Use std::string.
Tom Tromey [Sun, 25 Sep 2016 03:14:14 +0000 (21:14 -0600)]
Remove unnecessary null_cleanup
This patch removes an unnecessary null_cleanup.
2016-10-12 Tom Tromey <tom@tromey.com>
* tracepoint.c (trace_dump_command): Remove unnecessary
null_cleanup.
Tom Tromey [Fri, 23 Sep 2016 03:16:53 +0000 (21:16 -0600)]
Turn wchar iterator into a class
This changes wchar_iterator from charset.c into a real C++ class, then
updates the users to use the class. This lets us remove some cleanups
in favor of the class' destructor.
2016-10-12 Tom Tromey <tom@tromey.com>
* valprint.c (generic_emit_char, count_next_character)
(generic_printstr): Update.
* charset.c (struct wchar_iterator): Move to charset.h.
(wchar_iterator::wchar_iterator): Rename from
make_wchar_iterator, turn into a constructor.
(wchar_iterator::~wchar_iterator): Rename from
do_cleanup_iterator, turn into a destructor.
(make_cleanup_wchar_iterator): Remove.
(wchar_iterator::iterate): Rename from wchar_iterate. Remove
"iter" argument. Update.
* charset.h: Include <vector>.
(class wchar_iterator): New class, from old struct
wchar_iterator.
(make_wchar_iterator, make_cleanup_wchar_iterator): Don't
declare.
Tom Tromey [Fri, 23 Sep 2016 03:32:03 +0000 (21:32 -0600)]
Change selttest.c to use use std::vector
This patch changes selftest.c to use std::vector rather than VEC.
I think this is a small net plus.
2016-10-12 Tom Tromey <tom@tromey.com>
* selftest.c: Include <vector>, not "vec.h".
(self_test_function_ptr): Remove.
(tests): Now a std::vector.
(register_self_test, run_self_tests): Update.
Pedro Alves [Thu, 13 Oct 2016 00:54:07 +0000 (01:54 +0100)]
Convert tid_range_parser and get_number_or_range to classes
This converts tid_range_parser and get_number_or_range to be classes.
The various tid_range_parser_* and get_number_or_range_* functions
become methods on the respective classes. Then it updates the users
to follow.
The rationale for the change is that this provides better
encapsulation. For example, this forced me to think of a better
interface between tid_range_parser and get_number_or_range, since the
former peeked into the latter's internals a bit too much. That ended
up resulting mostly in these two not-just-straight-1-1 changes:
void
-tid_range_parser_skip (struct tid_range_parser *parser)
+tid_range_parser::skip_range ()
{
...
- tid_range_parser_init (parser, parser->range_parser.end_ptr,
- parser->default_inferior);
+ m_range_parser.skip_range ();
+ init (m_range_parser.string (), m_default_inferior);
}
and:
/* If we successfully parsed a thread number or finished parsing a
thread range, switch back to assuming the next TID is
inferior-qualified. */
- if (parser->range_parser.end_ptr == NULL
- || parser->range_parser.string == parser->range_parser.end_ptr)
+ if (!m_range_parser.in_range ())
{
For the same reason (encapsulation), this moves the enum
tid_range_state definition to within the tid_parser class's scope,
since that is private implementation detail.
While at it, switch to use "bool" for booleans.
gdb/ChangeLog:
2016-10-13 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* tid-parse.h (tid_range_parser): New class.
(enum tid_range_state): Move into tid_range_parser's scope.
Remove TID_RANGE_ prefix from all values.
(tid_range_parser_get_tid, tid_range_parser_get_tid_range)
(tid_range_parser_star_range, tid_range_parser_finished)
(tid_range_parser_skip, tid_range_parser_qualified): Don't
declare.
(tid_is_in_list): Update comment.
* tid-parse.c (tid_range_parser::tid_range_parser): New.
(init, finished, get_string, skip, tid_is_qualified)
(get_tid_or_range, get_tid_range, get_tid, star_range): Rename;
turn into methods.
(tid_is_in_list): Adjust.
* cli/cli-utils.h (number_or_range_parser): New class.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Don't declare.
* cli/cli-utils.c
(number_or_range_parser::number_or_range_parser): New.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Rename; turn into methods.
(number_is_in_list): Adjust.
* breakpoint.c (map_breakpoint_numbers): Adjust. Use bool.
(trace_pass_command, get_tracepoint_by_number): Adjust.
* breakpoint.h (get_tracepoint_by_number): Adjust.
* inferior.c (detach_inferior_command, kill_inferior_command)
(remove_inferior_command): Adjust.
* linespec.c (decode_line_2): Adjust.
* memattr.c (mem_enable_command, mem_disable_command)
(mem_delete_command): Adjust.
* printcmd.c (map_display_numbers): Adjust.
* reverse.c (delete_bookmark_command, bookmarks_info): Adjust.
* thread.c (thread_apply_command): Adjust.
GDB Administrator [Thu, 13 Oct 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Luis Machado [Wed, 12 Oct 2016 15:10:03 +0000 (10:10 -0500)]
Fixup gdb.python/py-value.exp for bare-metal aarch64-elf
I noticed that testing aarch64-elf gdb with a physical board
ran into issues with gdb.python/py-value.exp. Further investigation showed
that we were actually trying to dereference a NULL pointer (argv) when trying
to access argv[0].
Being bare-metal, argv is not guaranteed to be valid. So we need to make sure
argv is sane before accessing argv[0].
The following patch fixes up the test program to check for a NULL argv and also
improves the testcase a bit so it doesn't have to work with a hardcoded argc
value.
Regression-tested on x86-64 Ubuntu 16.04.
gdb/testsuite/ChangeLog:
2016-10-12 Luis Machado <lgustavo@codesourcery.com>
* gdb.python/py-value.c (main): Check if argv is NULL before using it.
* gdb.python/py-value.exp (test_value_in_inferior): Don't use hardcoded
argc values.
Add 1 to argc so we guarantee distinct initial/modified argc values.
Anton Kolesov [Wed, 12 Oct 2016 11:36:44 +0000 (14:36 +0300)]
arc: Add support for Newlib
Add support for Newlib as an OS/ABI. The only thing that is specific to it
relatively to "generic" baremetal target is location of PC register in jump
buffer for longjump support.
Sniffer uses .ivt section to decide if ELF file is for ARC Newlib or not.
gdb/ChangeLog:
* arc-newlib-tdep.c: New file.
* configure.tgt: Add newlib support for ARC.
Anton Kolesov [Wed, 12 Oct 2016 11:36:44 +0000 (14:36 +0300)]
arc: Add evaluation of long jump targets
Standard get_longjmp_target implementation, similar to what is in arm-tdep.c.
Actual value of jb_pc should be set in init_osabi methods of particular OS/ABI
implementations.
gdb/ChangeLog:
* arc-tdep.h (struct gdbarch_tdep) <jb_pc>: New field.
* arc-tdep.c (arc_get_longjmp_target): New function.
(arc_gdbarch_init): Set get_longjmp_target if jb_pc is non-negative.
(arc_dump_tdep): Print jb_pc.
Anton Kolesov [Wed, 12 Oct 2016 11:36:44 +0000 (14:36 +0300)]
arc: Add a gdbarch_tdep structure
Add target-specific structure gdbarch_tdep for ARC.
gdb/ChangeLog:
* arc-tdep.h (struct gdbarch_tdep): New.
* arc-tdep.c (arc_gdbarch_init): Allocate gdbarch_tdep.
Yao Qi [Tue, 11 Oct 2016 11:12:46 +0000 (12:12 +0100)]
[AArch64] Track FP registers in prologue analyzer
We don't track FP registers in aarch64 prologue analyzer, so this causes
an internal error when FP registers are saved by "stp" instruction in
prologue (stp d8, d9, [sp,#128]),
tbreak _Unwind_RaiseException^M
aarch64-tdep.c:335: internal-error: CORE_ADDR aarch64_analyze_prologue(gdbarch*, CORE_ADDR, CORE_ADDR, aarch64_prologue_cache*): Assertion `inst.operands[0].type == AARCH64_OPND_Rt' failed.^M
A problem internal to GDB has been detected,
This patch teaches GDB to track FP registers (D registers) in prologue
analyzer.
gdb:
2016-10-12 Yao Qi <yao.qi@linaro.org>
PR tdep/20682
* aarch64-tdep.c: Replace 32 with AARCH64_D_REGISTER_COUNT.
(aarch64_analyze_prologue): Extend array 'regs' for D registers.
Assert that operand 0 and 1 can be X or D registers. Update
register number for D registers. Update registers in frame
cache.
* aarch64-tdep.h (AARCH64_D_REGISTER_COUNT): New macro.
GDB Administrator [Wed, 12 Oct 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Tue, 11 Oct 2016 23:22:53 +0000 (09:52 +1030)]
missing changelog entry
Alan Modra [Tue, 11 Oct 2016 23:11:33 +0000 (09:41 +1030)]
BFD_FAKE_SECTION macro params
Order NAME, IDX, FLAGS as per STD_SECTION macro.
* section.c (BFD_FAKE_SECTION): Reorder parameters. Formatting.
(STD_SECTION): Adjust to suit.
* elf.c (_bfd_elf_large_com_section): Likewise.
* bfd-in2.h: Regenerate.
Alan Modra [Tue, 11 Oct 2016 23:01:24 +0000 (09:31 +1030)]
Update more tests for objdump change
* testsuite/ld-i386/pr19636-1d-nacl.d: Adjust for objdump change.
* testsuite/ld-i386/pr19636-2c-nacl.d: Likewise.
* testsuite/ld-tic6x/shlib-1r.dd: Likewise.
* testsuite/ld-x86-64/plt-nacl.pd: Likewise.
* testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise.
Jan Kratochvil [Tue, 11 Oct 2016 17:09:05 +0000 (19:09 +0200)]
testsuite: Fix gdb.arch/powerpc-prologue.c compilation
gcc-6.2.1
gdb compile failed, gdb/testsuite/gdb.arch/powerpc-prologue.c: In function 'main':
gdb/testsuite/gdb.arch/powerpc-prologue.c:32:3: warning: implicit declaration of function 'optimized_1' [-Wimplicit-function-declaration]
optimized_1 ();
^~~~~~~~~~~
gdb/testsuite/ChangeLog
2016-10-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/powerpc-prologue.c (optimized_1): New declaration.
Jan Kratochvil [Tue, 11 Oct 2016 14:43:58 +0000 (16:43 +0200)]
testsuite: Use standard_output_file
gdb/testsuite/ChangeLog
2016-10-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/powerpc-prologue.exp: Use standard_output_file.
* gdb.arch/ppc64-symtab-cordic.exp: Likewise.
* gdb.arch/vsx-regs.exp: Likewise.
Nick Clifton [Tue, 11 Oct 2016 12:50:10 +0000 (13:50 +0100)]
Enhance objdump so that it will use .got, .plt and .plt.got section symbols when disassembling, and it will use dynamic relocs to interpret entries in the PLT and GOT.
binutils * objdump.c (is_significant_symbol_name): New function.
(remove_useless_symbols): Do not remove significanr symbols.
(find_symbol_for_address): If an exact match for the specified
address has not been found, try scanning the dynamic relocs to see
if one of these matches the address. If so, use the symbol
associated with the reloc.
(objdump_print_addr_with_symbol): Do not print offsets to symbols
with no value.
(disassemble_section): Only use dynamic relocs if the user
requested this.
(disassemble_data): Always load dynamic relocs if they are
available.
ld * ld-aarch64/emit-relocs-515-be.d: Adjust output to match change
in objdump.
* ld-aarch64/emit-relocs-515.d: Likewise.
* ld-aarch64/emit-relocs-516-be.d: Likewise.
* ld-aarch64/emit-relocs-516.d: Likewise.
* ld-aarch64/farcall-b-plt.d: Likewise.
* ld-aarch64/farcall-bl-plt.d: Likewise.
* ld-aarch64/gc-plt-relocs.d: Likewise.
* ld-aarch64/tls-desc-ie.d: Likewise.
* ld-aarch64/tls-tiny-desc.d: Likewise.
* ld-aarch64/tls-tiny-gd.d: Likewise.
* ld-aarch64/tls-tiny-ie.d: Likewise.
* ld-arm/arm-app-abs32.d: Likewise.
* ld-arm/arm-app.d: Likewise.
* ld-arm/arm-lib-plt32.d: Likewise.
* ld-arm/arm-lib.d: Likewise.
* ld-arm/armthumb-lib.d: Likewise.
* ld-arm/cortex-a8-fix-b-plt.d: Likewise.
* ld-arm/cortex-a8-fix-bcc-plt.d: Likewise.
* ld-arm/cortex-a8-fix-bl-plt.d: Likewise.
* ld-arm/cortex-a8-fix-bl-rel-plt.d: Likewise.
* ld-arm/cortex-a8-fix-blx-plt.d: Likewise.
* ld-arm/farcall-mixed-app-v5.d: Likewise.
* ld-arm/farcall-mixed-app.d: Likewise.
* ld-arm/farcall-mixed-app2.d: Likewise.
* ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* ld-arm/farcall-mixed-lib.d: Likewise.
* ld-arm/ifunc-10.dd: Likewise.
* ld-arm/ifunc-14.dd: Likewise.
* ld-arm/ifunc-15.dd: Likewise.
* ld-arm/ifunc-3.dd: Likewise.
* ld-arm/ifunc-4.dd: Likewise.
* ld-arm/ifunc-9.dd: Likewise.
* ld-arm/long-plt-format.d: Likewise.
* ld-arm/mixed-app-v5.d: Likewise.
* ld-arm/mixed-app.d: Likewise.
* ld-arm/mixed-lib.d: Likewise.
* ld-arm/tls-lib-loc.d: Likewise.
* ld-cris/dso-pltdis1.d: Likewise.
* ld-cris/dso-pltdis2.d: Likewise.
* ld-cris/dso12-pltdis.d: Likewise.
* ld-elf/symbolic-func.r: Likewise.
* ld-frv/fdpic-pie-1.d: Likewise.
* ld-frv/fdpic-pie-2.d: Likewise.
* ld-frv/fdpic-pie-6.d: Likewise.
* ld-frv/fdpic-pie-7.d: Likewise.
* ld-frv/fdpic-pie-8.d: Likewise.
* ld-frv/fdpic-shared-1.d: Likewise.
* ld-frv/fdpic-shared-2.d: Likewise.
* ld-frv/fdpic-shared-3.d: Likewise.
* ld-frv/fdpic-shared-4.d: Likewise.
* ld-frv/fdpic-shared-5.d: Likewise.
* ld-frv/fdpic-shared-6.d: Likewise.
* ld-frv/fdpic-shared-7.d: Likewise.
* ld-frv/fdpic-shared-8.d: Likewise.
* ld-frv/fdpic-shared-local-2.d: Likewise.
* ld-frv/fdpic-shared-local-8.d: Likewise.
* ld-frv/fdpic-static-1.d: Likewise.
* ld-frv/fdpic-static-2.d: Likewise.
* ld-frv/fdpic-static-6.d: Likewise.
* ld-frv/fdpic-static-7.d: Likewise.
* ld-frv/fdpic-static-8.d: Likewise.
* ld-frv/tls-dynamic-2.d: Likewise.
* ld-frv/tls-initial-shared-2.d: Likewise.
* ld-frv/tls-relax-shared-2.d: Likewise.
* ld-frv/tls-shared-2.d: Likewise.
* ld-i386/plt-nacl.pd: Likewise.
* ld-i386/plt-pic-nacl.pd: Likewise.
* ld-i386/plt-pic.pd: Likewise.
* ld-i386/plt.pd: Likewise.
* ld-i386/pr19636-1d-nacl.d: Likewise.
* ld-i386/pr19636-1d.d: Likewise.
* ld-i386/pr19636-2c-nacl.d: Likewise.
* ld-i386/pr19636-2c.d: Likewise.
* ld-ifunc/ifunc-21-x86-64.d: Likewise.
* ld-ifunc/ifunc-22-x86-64.d: Likewise.
* ld-ifunc/pr17154-i386.d: Likewise.
* ld-ifunc/pr17154-x86-64.d: Likewise.
* ld-m68k/plt1-68020.d: Likewise.
* ld-m68k/plt1-cpu32.d: Likewise.
* ld-m68k/plt1-isab.d: Likewise.
* ld-m68k/plt1-isac.d: Likewise.
* ld-metag/shared.d: Likewise.
* ld-metag/stub_pic_app.d: Likewise.
* ld-metag/stub_pic_shared.d: Likewise.
* ld-metag/stub_shared.d: Likewise.
* ld-s390/tlsbin_64.dd: Likewise.
* ld-s390/tlspic_64.dd: Likewise.
* ld-tic6x/shlib-1.dd: Likewise.
* ld-tic6x/shlib-1b.dd: Likewise.
* ld-tic6x/shlib-1rb.dd: Likewise.
* ld-tic6x/shlib-app-1.dd: Likewise.
* ld-tic6x/shlib-app-1b.dd: Likewise.
* ld-tic6x/shlib-app-1r.dd: Likewise.
* ld-tic6x/shlib-app-1rb.dd: Likewise.
* ld-tic6x/shlib-noindex.dd: Likewise.
* ld-vax-elf/export-class-data.dd: Likewise.
* ld-vax-elf/plt-local-lib.dd: Likewise.
* ld-vax-elf/plt-local.dd: Likewise.
* ld-x86-64/bnd-ifunc-2.d: Likewise.
* ld-x86-64/bnd-plt-1.d: Likewise.
* ld-x86-64/gotpcrel1.dd: Likewise.
* ld-x86-64/libno-plt-1b.dd: Likewise.
* ld-x86-64/load1c-nacl.d: Likewise.
* ld-x86-64/load1c.d: Likewise.
* ld-x86-64/load1d-nacl.d: Likewise.
* ld-x86-64/load1d.d: Likewise.
* ld-x86-64/mov1a.d: Likewise.
* ld-x86-64/mov1b.d: Likewise.
* ld-x86-64/mov1c.d: Likewise.
* ld-x86-64/mov1d.d: Likewise.
* ld-x86-64/mov2a.d: Likewise.
* ld-x86-64/mov2b.d: Likewise.
* ld-x86-64/mov2c.d: Likewise.
* ld-x86-64/mov2d.d: Likewise.
* ld-x86-64/mpx3.dd: Likewise.
* ld-x86-64/mpx4.dd: Likewise.
* ld-x86-64/no-plt-1a.dd: Likewise.
* ld-x86-64/no-plt-1b.dd: Likewise.
* ld-x86-64/no-plt-1c.dd: Likewise.
* ld-x86-64/no-plt-1e.dd: Likewise.
* ld-x86-64/no-plt-1f.dd: Likewise.
* ld-x86-64/no-plt-1g.dd: Likewise.
* ld-x86-64/plt-main-bnd.dd: Likewise.
* ld-x86-64/plt-nacl.pd: Likewise.
* ld-x86-64/plt.pd: Likewise.
* ld-x86-64/pr18591.d: Likewise.
* ld-x86-64/pr19609-1c.d: Likewise.
* ld-x86-64/pr19609-1e.d: Likewise.
* ld-x86-64/pr19609-1j.d: Likewise.
* ld-x86-64/pr19609-1l.d: Likewise.
* ld-x86-64/pr19609-1m.d: Likewise.
* ld-x86-64/pr19609-5b.d: Likewise.
* ld-x86-64/pr19609-5c.d: Likewise.
* ld-x86-64/pr19609-5e.d: Likewise.
* ld-x86-64/pr19609-6b.d: Likewise.
* ld-x86-64/pr19609-7b.d: Likewise.
* ld-x86-64/pr19609-7d.d: Likewise.
* ld-x86-64/pr19636-2d.d: Likewise.
* ld-x86-64/pr20093-1.d: Likewise.
* ld-x86-64/pr20093-2.d: Likewise.
* ld-x86-64/pr20253-1b.d: Likewise.
* ld-x86-64/pr20253-1d.d: Likewise.
* ld-x86-64/pr20253-1f.d: Likewise.
* ld-x86-64/pr20253-1h.d: Likewise.
* ld-x86-64/pr20253-1j.d: Likewise.
* ld-x86-64/pr20253-1l.d: Likewise.
* ld-x86-64/protected3.d: Likewise.
* ld-x86-64/tlsbin.dd: Likewise.
* ld-x86-64/tlsbin2.dd: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsdesc-nacl.pd: Likewise.
* ld-x86-64/tlsdesc.dd: Likewise.
* ld-x86-64/tlsdesc.pd: Likewise.
* ld-x86-64/tlsgd10.dd: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgd8.dd: Likewise.
* ld-x86-64/tlsgdesc.dd: Likewise.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/tlspic2.dd: Likewise.
2016-10-11 Nick Clifton <nickc@redhat.com>
PR ld/20535
* emultempl/elf32.em (_search_needed): Add support for pseudo
environment variables supported by ld.so. Namely $ORIGIN, $LIB
and $PLATFORM.
* configure.ac: Add getauxval to list AC_CHECK_FUNCS list.
* config.in: Regenerate.
* configure: Regenerate.
2016-10-11 Alan Modra <amodra@gmail.com>
* ldlang.c (lang_do_assignments_1): Descend into output section
statements that do not yet have bfd sections. Set symbol section
temporarily for symbols defined in such statements to the undefined
section. Don't error on data or reloc statements until final phase.
* ldexp.c (exp_fold_tree_1 <etree_assign>): Handle bfd_und_section
in expld.section.
* testsuite/ld-mmix/bpo-10.d: Adjust.
* testsuite/ld-mmix/bpo-11.d: Adjust.
2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* emulparams/elf64_s390.sh: Move binary start to 16M.
* testsuite/ld-s390/tlsbin_64.dd: Adjust testcases accordingly.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
2016-10-07 Alan Modra <amodra@gmail.com>
* ldexp.c (MAX): Define.
(exp_unop, exp_binop, exp_trinop): Alloc at least enough for
etree_type.value.
2016-10-07 Alan Modra <amodra@gmail.com>
* testsuite/lib/ld-lib.exp (is_generic_elf): New, extracted from..
* testsuite/ld-elf/elf.exp: ..here.
2016-10-06 Ludovic Court?s <ludo@gnu.org>
* emulparams/elf32bmipn32-defs.sh: Shift quote of
"x$EMULATION_NAME" to the left to work around
<http://ftp.gnu.org/gnu/bash/bash-4.2-patches/bash42-007>.
2016-10-06 Alan Modra <amodra@gmail.com>
* lexsup.c: Spell fall through comments consistently and add
missing fall through comments.
2016-10-06 Alan Modra <amodra@gmail.com>
* plugin.c (asymbol_from_plugin_symbol): Avoid compiler warning
by adding return.
2016-10-04 Alan Modra <amodra@gmail.com>
* ld.texinfo (Expression Section): Update result of arithmetic
expressions.
* ldexp.c (arith_result_section): New function.
(fold_binary): Use it.
2016-10-04 Alan Modra <amodra@gmail.com>
* ldexp.c (exp_value_fold): New function.
(exp_unop, exp_binop, exp_trinop): Use it.
2016-09-30 Alan Modra <amodra@gmail.com>
* scripttempl/v850.sc: Don't reference __ctbp, __ep, __gp when
not relocating.
* scripttempl/v850_rh850.sc: Likewise.
2016-09-30 Alan Modra <amodra@gmail.com>
PR ld/20528
* testsuite/ld-elf/pr20528a.d: xfail generic elf targets. Allow
multiple .text sections for hppa-linux.
* testsuite/ld-elf/pr20528b.d: Likewise.
2016-09-30 Alan Modra <amodra@gmail.com>
* ldmain.c (default_bfd_error_handler): New function pointer.
(ld_bfd_error_handler): New function.
(main): Arrange to call it on bfd errors/warnings.
(ld_bfd_assert_handler): Enable tail call.
2016-09-30 Alan Modra <amodra@gmail.com>
* ldlang.c (ignore_bfd_errors): Update params.
2016-09-29 H.J. Lu <hongjiu.lu@intel.com>
PR ld/20528
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Don't
merge 2 sections with different SHF_EXCLUDE.
* testsuite/ld-elf/pr20528a.d: New file.
* testsuite/ld-elf/pr20528a.s: Likewise.
* testsuite/ld-elf/pr20528b.d: Likewise.
* testsuite/ld-elf/pr20528b.s: Likewise.
2016-09-28 Christophe Lyon <christophe.lyon@linaro.org>
PR ld/20608
* testsuite/ld-arm/arm-elf.exp: Handle new testcase.
* testsuite/ld-arm/farcall-mixed-app2.d: New file.
* testsuite/ld-arm/farcall-mixed-app2.r: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.s: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.sym: Likewise.
2016-09-26 Vlad Zakharov <vzakhar@synopsys.com>
* Makefile.in: Regenerate.
* configure: Likewise.
2016-09-26 Alan Modra <amodra@gmail.com>
* testsuite/ld-powerpc/attr-gnu-4-4.s: Delete.
* testsuite/ld-powerpc/attr-gnu-4-14.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-24.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-34.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-41.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output.
* testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.
2016-09-23 Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
PR ld/20595
* testsuite/ld-arm/unwind-4.d: Add -q option to linker command
line and -r option to objdump command line. Match emitted relocs
to make sure that superflous relocs are not generated.
2016-09-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* emulparams/elf64_s390.sh: Change TEXT_START_ADDR to 256MB.
* testsuite/ld-s390/tlsbin_64.dd: Adjust testcase accordingly.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
2016-09-22 Nick Clifton <nickc@redhat.com>
* emultempl/elf32.em (_try_needed): In verbose mode, report failed
attempts to find a needed library.
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
* testsuite/ld-aarch64/emit-relocs-28.d: Expect spaces after ","
in addresses.
* testsuite/ld-aarch64/emit-relocs-301-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-301.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-302-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-302.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-310-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-310.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-313.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-515-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-515.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-516-be.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-516.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-531.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-532.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-533.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-534.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-535.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-536.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-537.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-538.d: Likewise.
* testsuite/ld-aarch64/erratum835769.d: Likewise.
* testsuite/ld-aarch64/erratum843419.d: Likewise.
* testsuite/ld-aarch64/farcall-b-plt.d: Likewise.
* testsuite/ld-aarch64/farcall-bl-plt.d: Likewise.
* testsuite/ld-aarch64/gc-plt-relocs.d: Likewise.
* testsuite/ld-aarch64/ifunc-21.d: Likewise.
* testsuite/ld-aarch64/ifunc-7c.d: Likewise.
* testsuite/ld-aarch64/tls-desc-ie.d: Likewise.
* testsuite/ld-aarch64/tls-large-desc-be.d: Likewise.
* testsuite/ld-aarch64/tls-large-desc.d: Likewise.
* testsuite/ld-aarch64/tls-large-ie-be.d: Likewise.
* testsuite/ld-aarch64/tls-large-ie.d: Likewise.
* testsuite/ld-aarch64/tls-relax-all.d: Likewise.
* testsuite/ld-aarch64/tls-relax-gd-ie.d: Likewise.
* testsuite/ld-aarch64/tls-relax-gdesc-ie-2.d: Likewise.
* testsuite/ld-aarch64/tls-relax-gdesc-ie.d: Likewise.
* testsuite/ld-aarch64/tls-relax-large-desc-ie-be.d: Likewise.
* testsuite/ld-aarch64/tls-relax-large-desc-ie.d: Likewise.
* testsuite/ld-aarch64/tls-tiny-desc.d: Likewise.
* testsuite/ld-aarch64/tls-tiny-gd.d: Likewise.
gas * gas/arm/tls.d: Adjust output to match change in objdump.
Nick Clifton [Tue, 11 Oct 2016 11:04:42 +0000 (12:04 +0100)]
Add support to the static linker for the tokens accepted by the dynamic linker when resolving search paths.
PR ld/20535
* emultempl/elf32.em (_search_needed): Add support for pseudo
environment variables supported by ld.so. Namely $ORIGIN, $LIB
and $PLATFORM.
* configure.ac: Add getauxval to list AC_CHECK_FUNCS list.
* config.in: Regenerate.
* configure: Regenerate.
Jiong Wang [Tue, 11 Oct 2016 10:24:44 +0000 (11:24 +0100)]
[AArch64] PR target/20666, fix wrong encoding of new introduced BFC pseudo
opcode/
PR target/20666
* aarch64-asm.c (convert_bfc_to_bfm): Fix dest index.
gas/
* testsuite/gas/aarch64/alias-2.d: Update expected results.
Alan Modra [Tue, 11 Oct 2016 07:43:04 +0000 (18:13 +1030)]
Always descend into output section statements in lang_do_assignments
See https://sourceware.org/ml/binutils/2016-07/msg00091.html
This patch stop --gc-sections elf_gc_sweep_symbol localizing symbols
that ought to remain global.
The difficulty with always descending into output section statements
is that symbols defined by the script in such statements don't have
a bfd section when lang_do_assignments runs early in the link process.
There are two approaches to curing this problem. Either we can
create the bfd section early, or we can use a special section. This
patch takes the latter approach and uses bfd_und_section. (Creating
bfd sections early results in changed output section order, and thus
lots of testsuite failures. You can't create all output sections
early to ensure proper ordering as KEEP then stops empty sections
from being stripped.)
The wrinkle with this approach is that some code that runs at
gc-sections time needs to be made aware of the odd defined symbols
using bfd_und_section.
bfd/
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Handle symbols
defined temporarily with bfd_und_section.
* elflink.c (_bfd_elf_gc_keep): Don't set SEC_KEEP for bfd_und_section.
* elfxx-mips.c (mips_elf_local_pic_function_p): Exclude defined
symbols with bfd_und_section.
ld/
* ldlang.c (lang_do_assignments_1): Descend into output section
statements that do not yet have bfd sections. Set symbol section
temporarily for symbols defined in such statements to the undefined
section. Don't error on data or reloc statements until final phase.
* ldexp.c (exp_fold_tree_1 <etree_assign>): Handle bfd_und_section
in expld.section.
* testsuite/ld-mmix/bpo-10.d: Adjust.
* testsuite/ld-mmix/bpo-11.d: Adjust.
GDB Administrator [Tue, 11 Oct 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Andreas Krebbel [Mon, 10 Oct 2016 15:09:03 +0000 (17:09 +0200)]
S/390: Move binary start to 16M.
Turned out that by moving the binary start to 256M I've hit a case with
potentially a lot of aliasing in the branch target buffer between
binaries and shared libs. So moving on.
Tested on s390x. No regressions.
ld/ChangeLog:
2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* emulparams/elf64_s390.sh: Move binary start to 16M.
* testsuite/ld-s390/tlsbin_64.dd: Adjust testcases accordingly.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
Maciej W. Rozycki [Mon, 10 Oct 2016 13:49:00 +0000 (14:49 +0100)]
bfd/ChangeLog: Add missing PR ld/19908 reference
Andreas Krebbel [Mon, 10 Oct 2016 12:06:35 +0000 (14:06 +0200)]
MIPS64: Adjust cfi* testcases.
The CFI* testcases fail on MIPS64 because the augmentation string does
not match the regexp. This is because MIPS64 doesn't use the default of
4 for DWARF2_FDE_RELOC_SIZE which ends up as "b" in the augmentation
string. MIPS64 uses the address size which is 8 resulting in "c".
Adding c to the regexp fixes a couple of them. Others also need
adjustments in the FDE header lines due to different
sizes/offsets.
gas/ChangeLog:
2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/cfi/cfi-common-1.d: Adjust regexps for mips64.
* testsuite/gas/cfi/cfi-common-2.d: Likewise.
* testsuite/gas/cfi/cfi-common-3.d: Likewise.
* testsuite/gas/cfi/cfi-common-4.d: Likewise.
* testsuite/gas/cfi/cfi-common-5.d: Likewise.
* testsuite/gas/cfi/cfi-common-7.d: Likewise.
* testsuite/gas/cfi/cfi-common-8.d: Likewise.
* testsuite/gas/cfi/cfi-common-9.d: Likewise.
* testsuite/gas/cfi/cfi-mips-1.d: Likewise.
Yao Qi [Mon, 10 Oct 2016 10:11:25 +0000 (11:11 +0100)]
Share enum arm_breakpoint_kinds
This patch shares "enum arm_breakpoint_kinds", and use ARM_BP_KIND_THUMB2
in GDB.
gdb:
2016-10-10 Yao Qi <yao.qi@linaro.org>
* arch/arm.h (enum arm_breakpoint_kinds): New.
* arm-tdep.c (arm_remote_breakpoint_from_pc): Use
ARM_BP_KIND_THUMB2.
gdb/gdbserver:
2016-10-10 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (enum arm_breakpoint_kinds): Remove.
Yao Qi [Mon, 10 Oct 2016 09:32:46 +0000 (10:32 +0100)]
Rename 'arch' by 'gdbarch' in m32c_gdbarch_init
This patch renames local 'arch' by 'gdbarch' in m32c_gdbarch_init, so
that I can use macros in the following patch.
gdb:
2016-10-10 Yao Qi <yao.qi@linaro.org>
* m32c-tdep.c (m32c_gdbarch_init): Rename local 'arch' by
'gdbarch'.
Yao Qi [Mon, 10 Oct 2016 09:28:30 +0000 (10:28 +0100)]
Remove v850_dbtrap_breakpoint_from_pc
v850 has two functions to install to gdbarch_breakpoint_from_pc,
and it selects one according to info.bfd_arch_info->mach. However,
we can select the kind/length of breakpoint instruction inside
v850_breakpoint_from_pc by gdbarch_bfd_arch_info (gdbarch)->mach.
This patch is to do that, and remove v850_dbtrap_breakpoint_from_pc.
gdb:
2016-08-30 Yao Qi <yao.qi@linaro.org>
* v850-tdep.c (v850_breakpoint_from_pc): Use the right
breakpoint instruction.
(v850_dbtrap_breakpoint_from_pc): Remove.
(v850_gdbarch_init): Update.
GDB Administrator [Mon, 10 Oct 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 9 Oct 2016 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Sat, 8 Oct 2016 23:47:09 +0000 (19:47 -0400)]
ui-out.c: Remove unused parameter to push_level
The parameter "id" is unused.
gdb/ChangeLog:
* ui-out.c (push_level): Remove "id" parameter.
(ui_out_begin): Update call.
Alan Modra [Sat, 8 Oct 2016 03:19:00 +0000 (13:49 +1030)]
Auto-generated dependencies for rx-parse.o and rl78-parse.o
I noticed a while ago that the rx-elf gas gprel test regressed for no
apparent reason. It turns out that the problem was rx-parse.y using
BFD_RELOC_RX_* values, which may change when other targets add new
relocs. If rx-parse.o doesn't depend on bfd.h, it won't be recompiled.
* Makefile.am (EXTRA_as_new_SOURCES): Add config/rl78-parse.y and
config/rx-parse.y. Move config/bfin-parse.y.
(bfin-parse.@OBJEXT@, rl78-parse.@OBJEXT@, rx-parse.@OBJEXT@): Delete.
($(srcdir)/config/rl78-defs.h): New rule.
* Makefile.in: Regenerate.
GDB Administrator [Sat, 8 Oct 2016 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
Joel Brobecker [Fri, 7 Oct 2016 17:18:36 +0000 (10:18 -0700)]
Document the GDB 7.12 release in gdb/ChangeLog
gdb/ChangeLog:
GDB 7.12 released.
Alan Modra [Fri, 7 Oct 2016 12:24:45 +0000 (22:54 +1030)]
Fold arithmetic integer expressions fallout
* ldexp.c (MAX): Define.
(exp_unop, exp_binop, exp_trinop): Alloc at least enough for
etree_type.value.
Jiong Wang [Fri, 7 Oct 2016 09:55:56 +0000 (10:55 +0100)]
[AArch64] PR target/20667, fix disassembler for the "special" optional SYS_Rt operand for "ic"/"tlbi"
gas/
PR target/20667
* testsuite/gas/aarch64/sys-rt-reg.s: Test source for instructions
using SYS_Rt reg.
* testsuite/gas/aarch64/sys-rt-reg.d: New testcase.
opcodes/
PR target/20667
* aarch64-opc.c (aarch64_print_operand): Always print operand if
it's available.
Yao Qi [Fri, 7 Oct 2016 09:24:12 +0000 (10:24 +0100)]
Set regdir in tdesc-regs.exp or arm
0a69eedb (Clean up the XML files for ARM) moves arm-*.xml files to
arm/ directory, so need update gdb.xml/tdesc-regs.exp accordingly.
gdb/testsuite:
2016-10-07 Yao Qi <yao.qi@linaro.org>
* gdb.xml/tdesc-regs.exp: Set regdir to "arm/".
Markus Metzger [Mon, 20 Jun 2016 09:12:14 +0000 (11:12 +0200)]
python: accept address and explicit locations in gdb.decode_line
The gdb.decode_line python function is documented to support the same location
expressions as the "break" command. It currently expects a linespec location.
Instead of creating a linespec location directly, create the location via
string_to_event_location_basic.
Alan Modra [Thu, 29 Sep 2016 23:14:50 +0000 (08:44 +0930)]
Pass link_info to _bfd_merge_private_bfd_data
Most BFD linker functions take a bfd_link_info param, which reinforces
the fact that they are linker functions and allow access to linker
callbacks, eg. einfo for printing errors. I was going to use einfo
for --fatal-warnings support before I decided a better way was the
patch commit
4519d071.
bfd/
* targets.c (bfd_target <_bfd_merge_private_bfd_data>): Replace
obfd param with struct bfd_link_info param. Update all callers.
* linker.c (bfd_merge_private_bfd_data): Likewise.
(_bfd_generic_verify_endian_match): Likewise.
* aoutf1.h (sunos_merge_private_bfd_data): Likewise.
* coff-arm.c (coff_arm_merge_private_bfd_data): Likewise.
* elf-attrs.c (_bfd_elf_merge_object_attributes): Likewise.
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Likewise.
(_bfd_elf_merge_object_attributes): Likewise.
* elf-m10300.c (_bfd_mn10300_elf_merge_private_bfd_data): Likewise.
* elf-s390-common.c (elf_s390_merge_obj_attributes): Likewise.
* elf32-arc.c (arc_elf_merge_private_bfd_data): Likewise.
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Likewise.
(elf32_arm_merge_private_bfd_data): Likewise.
* elf32-bfin.c (elf32_bfin_merge_private_bfd_data): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_merge_private_bfd_data): Likewise.
* elf32-cris.c (cris_elf_merge_private_bfd_data): Likewise.
* elf32-frv.c (frv_elf_merge_private_bfd_data): Likewise.
* elf32-h8300.c (elf32_h8_merge_private_bfd_data): Likewise.
* elf32-i370.c (i370_elf_merge_private_bfd_data): Likewise.
* elf32-iq2000.c (iq2000_elf_merge_private_bfd_data): Likewise.
* elf32-m32c.c (m32c_elf_merge_private_bfd_data): Likewise.
* elf32-m32r.c (m32r_elf_merge_private_bfd_data): Likewise.
* elf32-m68hc1x.c (_bfd_m68hc11_elf_merge_private_bfd_data): Likewise.
* elf32-m68hc1x.h (_bfd_m68hc11_elf_merge_private_bfd_data): Likewise.
* elf32-m68k.c (elf32_m68k_merge_private_bfd_data): Likewise.
* elf32-mcore.c (mcore_elf_merge_private_bfd_data): Likewise.
* elf32-mep.c (mep_elf_merge_private_bfd_data): Likewise.
* elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Likewise.
(elf32_msp430_merge_private_bfd_data): Likewise.
* elf32-mt.c (mt_elf_merge_private_bfd_data): Likewise.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Likewise.
* elf32-nios2.c (nios2_elf32_merge_private_bfd_data): Likewise.
* elf32-or1k.c (elf32_or1k_merge_private_bfd_data): Likewise.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Likewise.
(ppc_elf_merge_obj_attributes): Likewise.
(ppc_elf_merge_private_bfd_data): Likewise.
* elf32-rl78.c (rl78_elf_merge_private_bfd_data): Likewise.
* elf32-rx.c (rx_elf_merge_private_bfd_data): Likewise.
* elf32-s390.c (elf32_s390_merge_private_bfd_data): Likewise.
* elf32-score.c (s3_elf32_score_merge_private_bfd_data): Likewise.
(elf32_score_merge_private_bfd_data): Likewise.
* elf32-score.h (s7_elf32_score_merge_private_bfd_data): Likewise.
* elf32-score7.c (s7_elf32_score_merge_private_bfd_data): Likewise.
* elf32-sh.c (sh_merge_bfd_arch, sh_elf_merge_private_data): Likewise.
* elf32-sh64.c (sh64_elf_merge_private_data): Likewise.
* elf32-sparc.c (elf32_sparc_merge_private_bfd_data): Likewise.
* elf32-tic6x.c (elf32_tic6x_merge_attributes): Likewise.
(elf32_tic6x_merge_private_bfd_data): Likewise.
* elf32-v850.c (v850_elf_merge_private_bfd_data): Likewise.
* elf32-vax.c (elf32_vax_merge_private_bfd_data): Likewise.
* elf32-visium.c (visium_elf_merge_private_bfd_data): Likewise.
* elf32-xtensa.c (elf_xtensa_merge_private_bfd_data): Likewise.
* elf64-ia64-vms.c (elf64_ia64_merge_private_bfd_data): Likewise.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Likewise.
* elf64-s390.c (elf64_s390_merge_private_bfd_data): Likewise.
* elf64-sh64.c (sh_elf64_merge_private_data): Likewise.
* elf64-sparc.c (elf64_sparc_merge_private_bfd_data): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_merge_private_bfd_data): Likewise.
* elfnn-ia64.c (elfNN_ia64_merge_private_bfd_data): Likewise.
* elfxx-mips.c (mips_elf_merge_obj_e_flags): Likewise.
(mips_elf_merge_obj_attributes): Likewise.
(_bfd_mips_elf_merge_private_bfd_data): Likewise.
* elfxx-mips.h (_bfd_mips_elf_merge_private_bfd_data): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_merge_private_bfd_data): Likewise.
* elfxx-sparc.h (_bfd_sparc_elf_merge_private_bfd_data): Likewise.
* elfxx-target.h (bfd_elfNN_bfd_merge_private_bfd_data): Likewise.
* elfxx-tilegx.c (_bfd_tilegx_elf_merge_private_bfd_data): Likewise.
* elfxx-tilegx.h (_bfd_tilegx_elf_merge_private_bfd_data): Likewise.
* libbfd-in.h (_bfd_generic_bfd_merge_private_bfd_data): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
ld/
* ldlang.c (lang_check): Update bfd_merge_private_bfd_data call.
Alan Modra [Fri, 7 Oct 2016 00:28:35 +0000 (10:58 +1030)]
bfd_merge_private_bfd_data tidy
bfd_merge_private_bfd_data and _bfd_generic_verify_endian_match are
linker functions, so move them to linker.c.
bfd/
* Makefile.am (LIBBFD_H_FILES): Update.
* doc/Makefile.am (LIBBFD_H_DEP): Likewise.
* cpu-sh.c (sh_merge_bfd_arch): Move to..
* elf32-sh.c: ..here, and make static.
* elf32-arc.c (arc_elf_merge_private_bfd_data): Delete extraneous
error.
* elf32-cris.c (cris_elf_merge_private_bfd_data): Don't call
_bfd_generic_verify_endian_match.
* elf32-microblaze.c (microblaze_elf_merge_private_bfd_data): Delete.
(bfd_elf32_bfd_merge_private_bfd_data): Define as
_bfd_generic_verify_endian_match.
* elf32-mt.c (mt_elf_merge_private_bfd_data): Don't test
boolean == FALSE.
* elf32-xgate.c (_bfd_xgate_elf_merge_private_bfd_data): Delete.
(bfd_elf32_bfd_merge_private_bfd_data): Don't define.
* elf32-xgate.h (_bfd_xgate_elf_merge_private_bfd_data): Delete.
* libbfd-in.h (_bfd_generic_verify_endian_match): Delete.
* libbfd.c (_bfd_generic_verify_endian_match): Move to..
* linker.c: ..here, and make internal.
* bfd.c (bfd_merge_private_bfd_data): Move to..
* linker.c: ..here.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
opcodes/
* sh-opc.h (sh_merge_bfd_arch): Delete prototype.
Alan Modra [Mon, 25 Jul 2016 02:36:52 +0000 (12:06 +0930)]
Add is_generic_elf to ld/ld-lib.exp
* testsuite/lib/ld-lib.exp (is_generic_elf): New, extracted from..
* testsuite/ld-elf/elf.exp: ..here.
GDB Administrator [Fri, 7 Oct 2016 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
Sergio Durigan Junior [Tue, 27 Sep 2016 20:21:48 +0000 (16:21 -0400)]
Consolidate API of target_supports_multi_process
This simple commit consolidates the API of
target_supports_multi_process. Since both GDB and gdbserver use the
same function prototype, all that was needed was to move create this
prototype on gdb/target/target.h and turn the macros declared on
gdb/{,gdbserver/}target.h into actual functions.
Regtested (clean pass) on the BuildBot.
gdb/ChangeLog:
2016-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_supports_multi_process): New function, moved
from...
* target.h (target_supports_multi_process): ... here. Remove
macro.
* target/target.h (target_supports_multi_process): New prototype.
gdb/gdbserver/ChangeLog:
2016-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_supports_multi_process): New function, moved
from...
* target.h (target_supports_multi_process): ... here. Remove
macro.
Pedro Alves [Thu, 6 Oct 2016 18:23:37 +0000 (19:23 +0100)]
gdb: Remove some C compiler support leftovers
Remove some __cplusplus checks, inline EXPORTED_CONST, and update some comments.
gdb/ChangeLog:
2016-10-06 Pedro Alves <palves@redhat.com>
* cp-valprint.c (vtbl_ptr_name): Write "extern const" instead of
EXPORTED_CONST.
* stub-termcap.c: Remove __cplusplus checks.
* common/common-defs.h [!__cplusplus] (EXTERN_C, EXTERN_C_PUSH,
EXTERN_C_POP): Delete.
* common/common-exceptions.h (GDB_XCPT_SJMP): Update comments.
(GDB_XCPT) [!__cplusplus]: Delete.
(throw_exception, throw_exception_sjlj): Update comments.
* guile/guile-internal.h (as_a_scm_t_subr) [!__cplusplus]: Delete.
* guile/guile.c (extension_language_guile): Write "extern const"
instead of EXPORTED_CONST.
* features/feature_to_c.sh: Don't emit !__cplusplus code. Write
"extern const" instead of EXPORTED_CONST.
Doug Evans [Thu, 6 Oct 2016 17:41:27 +0000 (10:41 -0700)]
Fix gdb.Value->python conversion for large unsigned ints.
gdb/ChangeLog:
* python/py-value.c (valpy_long): Handle unsigned values.
gdb/testsuite/ChangeLog:
* gdb.python/py-value.exp (test_value_creation): Add test for large
unsigned 64-bit value.
Simon Marchi [Thu, 6 Oct 2016 17:01:37 +0000 (13:01 -0400)]
frame.h: Forward-declare struct ui_out
Fixes this failure when building in C mode. I think it's relevant for master
as well, since it's a good practice to include (or forward-declare) what you
use.
In file included from ../../binutils-gdb/gdb/gdbarch.h:38:0,
from ../../binutils-gdb/gdb/defs.h:653,
from ../../binutils-gdb/gdb/dictionary.c:23:
../../binutils-gdb/gdb/frame.h:710:48: warning: ‘struct ui_out’ declared inside parameter list will not be visible outside of this definition or declaration
extern void print_stack_frame_to_uiout (struct ui_out *uiout,
gdb/ChangeLog:
* frame.h: Forward-declare struct ui_out.
Tom Tromey [Wed, 5 Oct 2016 14:44:34 +0000 (08:44 -0600)]
Remove Java support
This patch removes the Java support from gdb. gcj has not seen much
development or use for years now, and was recently removed from GCC.
This patch changes gdb to follow; in the unlikely event that there are
still users using gcj, they can continue to use an older gdb to debug.
Or, they can debug in C++ mode.
Built and regtested on x86-64 Fedora 24.
2016-10-06 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Remove Java test maintainer.
* varobj.h (java_varobj_ops): Don't declare.
* valprint.h (struct value_print_options)
<pascal_static_field_print>: Update comment.
* utils.c (producer_is_gcc): Remove java reference.
* symtab.h (struct general_symbol_info): Remove java references.
(SYMBOL_SEARCH_NAME): Likewise.
* objfiles.c (allocate_objfile): Update comment.
* linespec.c (find_linespec_symbols): Remove java references.
* gnu-v3-abi.c (gnuv3_rtti_type, gnuv3_baseclass_offset): Remove
java references.
* gdbtypes.h (struct cplus_struct_type) <is_java>: Remove.
(TYPE_CPLUS_REALLY_JAVA): Remove.
* c-varobj.c (enum vsections): Update comment.
* symtab.c (symbol_set_language, symbol_set_names)
(symbol_natural_name, symbol_demangled_name)
(demangle_for_lookup, symbol_matches_domain)
(default_make_symbol_completion_list_break_on_1): Remove java
references.
(JAVA_PREFIX, JAVA_PREFIX_LEN): Remove.
* psymtab.c (match_partial_symbol, psymtab_search_name)
(lookup_partial_symbol): Remove java references.
* dwarf2read.c (find_slot_in_mapped_hash): Remove java references.
(add_partial_symbol, dwarf2_compute_name, dwarf2_physname)
(dwarf2_add_member_fn, is_vtable_name, read_structure_type)
(process_structure_scope, read_subroutine_type)
(read_subrange_type, load_partial_dies)
(new_symbol_full, determine_prefix, typename_concat)
(dwarf2_name): Remove java references.
(set_cu_language): Treat Java as C++.
* c-typeprint.c (c_type_print_args): Remove java reference.
* defs.h (enum language) <language_java>: Remove.
* Makefile.in (SFILES, HFILES_NO_SRCDIR, COMMON_OBS, YYFILES)
(YYOBJ, local-maintainer-clean): Don't mention java files.
* jv-exp.y, jv-lang.c, jv-lang.h, jv-typeprint.c, jv-valprint.c,
jv-varobj.c: Remove.
2016-10-06 Tom Tromey <tom@tromey.com>
* guile.texi (Types In Guile): Remove Java mentions.
* python.texi (Types In Python): Remove Java mentions.
* gdb.texinfo (Address Locations, Supported Languages)
(Index Section Format): Remove Java mentions.
2016-10-06 Tom Tromey <tom@tromey.com>
* gdb.compile/compile.exp: Change java tests to rust.
* gdb.base/setshow.exp: Change java tests to rust.
* gdb.base/default.exp: Remove java from language list.
* README (Examples): Update language example.
* gdb.python/py-lookup-type.exp (test_lookup_type): Remove java
test.
* lib/gdb.exp (skip_java_tests): Remove.
* lib/java.exp: Remove.
* gdb.java: Remove.
Maciej W. Rozycki [Thu, 6 Oct 2016 15:51:18 +0000 (16:51 +0100)]
mips-tdep: Make FCRs always 32-bit
Fix a regression from commit
f8b73d13b7ca ("Target-described register
support for MIPS"),
<https://sourceware.org/ml/gdb-patches/2007-05/msg00340.html>,
<https://sourceware.org/ml/gdb-patches/2007-06/msg00256.html>, which
caused Floating Point Control Registers (FCRs) to be shown as 64-bit
with 64-bit targets.
This came from the legacy register format where all raw registers
matched the width of the architecture regardless of their actual size.
The correct size was then set in `mips_register_type' for cooked
registers presented to the user, which in the case of FCRs meant the
cooked size was always forced to 32 bits, reflecting their actual
hardware size, even though the raw format carried them in 64-bit
quantities on 64-bit targets. The upper 32 bits carried in the raw FCR
format have always been don't-cares, not actually retrieved from
hardware and never written back.
With the introduction of XML register descriptions the layout of
previously defined raw registers has been preserved, so as to keep
existing register handling code unchanged and make it easier for GDB and
`gdbserver' to interact with each other whether neither, either or both
parties talking over RSP support XML register descriptions. For the
XML-described case however `mips_register_type' is not used in raw to
cooked register conversion, so any special cases coded there are not
taken into account.
Instead a new function, `mips_pseudo_register_type', has been introduced
to handle size conversion, however lacking the special case for FCRs for
the Linux and the now defunct IRIX target. The correct size has been
maintained for embedded targets however, due to the bundling of FCRs
with the embedded registers under the `rawnum >= MIPS_EMBED_FP0_REGNUM +
32' condition.
Add the missing case to `mips_pseudo_register_type' then, referring to
the FCR indices explicitly, and observing that between
`MIPS_EMBED_FP0_REGNUM + 32' and `MIPS_FIRST_EMBED_REGNUM' there is an
unused register slot whose contents are ignored so with the removal of
embedded FCRs from under that condition we don't have to care about it
and we can refer to the embedded registers starting from
MIPS_FIRST_EMBED_REGNUM instead.
Add a test case too so that we have means to check automatically that
the correct user-visible size of FCRs is maintained.
gdb/
* mips-tdep.c (mips_pseudo_register_type): Make FCRs always
32-bit.
gdb/testsuite/
* gdb.arch/mips-fcr.exp: New test.
* gdb.arch/mips-fcr.c: Source for the new test.
Maciej W. Rozycki [Thu, 6 Oct 2016 15:19:38 +0000 (16:19 +0100)]
mips-tdep: Rearrange comments in `mips_pseudo_register_type'
Rearrange comments throughout `mips_pseudo_register_type', placing them
ahead the condtionals they apply to consistently.
gdb/
* mips-tdep.c (mips_pseudo_register_type): Rearrange comments
throughout.
Claudiu Zissulescu [Wed, 28 Sep 2016 10:27:41 +0000 (12:27 +0200)]
[ARC] Fix parsing leave_s and enter_s mnemonics.
gas/
2016-10-06 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/leave_enter.d: New file.
* testsuite/gas/arc/leave_enter.s: Likewise.
* testsuite/gas/arc/regnames.d: Likewise.
* testsuite/gas/arc/regnames.s: Likewise.
* config/tc-arc.c (arc_parse_name): Don't match reg names against
confirmed symbol names.
Maciej W. Rozycki [Thu, 6 Oct 2016 14:12:54 +0000 (15:12 +0100)]
testsuite: solib-disc: Use `standard_output_file'
Correct a commit
2151ccc56c74 ("Always organize test artifacts in a
directory hierarchy") regression causing:
Running .../gdb/testsuite/gdb.base/solib-disc.exp ...
gdb compile failed, Assembler messages:
Fatal error: can't create .../gdb/testsuite/gdb.base/so-disc-shr.c.o: No such file or directory
by using `standard_output_file' to construct output file names
throughout.
gdb/testsuite/
* gdb.base/solib-disc.exp: Use `standard_output_file'
throughout.
Ludovic Court?s [Thu, 6 Oct 2016 12:49:09 +0000 (13:49 +0100)]
Add workaround for bash 4.2 scripting problem.
* emulparams/elf32bmipn32-defs.sh: Shift quote of
"x$EMULATION_NAME" to the left to work around
<http://ftp.gnu.org/gnu/bash/bash-4.2-patches/bash42-007>.
Markus Metzger [Fri, 22 Jul 2016 08:01:19 +0000 (10:01 +0200)]
stack: fix gdb.dwarf2/dw2-undefined-ret-addr.exp regression
Commit
a038fa3e14a4 stack: check frame_unwind_caller_id adds a frame_id check to
frame_info and treats a missing frame_id as NOT_AVAILABLE_ERROR. This causes a
regression in gdb.dwarf2/dw2-undefined-ret-addr.exp.
Treat a missing frame_id as OPTIMIZED_OUT_ERROR instead.
See also https://sourceware.org/ml/gdb-patches/2016-07/msg00273.html.
Alan Modra [Thu, 6 Oct 2016 12:19:08 +0000 (22:49 +1030)]
-Wimplicit-fallthrough dodgy fixes
The comment logically belongs inside the preprocessor conditional,
but gcc's -Wimplicit-fallthrough loses track of it. Revert when/if
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77817 is fixed.
* app.c (do_scrub_chars): Move fall through comment.
* expr.c (operand): Likewise.
Alan Modra [Thu, 6 Oct 2016 10:11:13 +0000 (20:41 +1030)]
Add fall through comment to source in cpu/
I edited opcodes/mep-asm.c in
1a0670f3 without noticing it was a
generated file.
* mep.opc (expand_string): Add fall through comment.
Alan Modra [Thu, 6 Oct 2016 05:24:38 +0000 (15:54 +1030)]
[GOLD] two more fall-through comments
* powerpc.cc (Target_powerpc::Relocate::relocate): Add fall
through comment.
* tilegx.cc (Target_tilegx::Relocate::relocate): Likewise.
Pedro Alves [Thu, 6 Oct 2016 11:53:52 +0000 (12:53 +0100)]
Fix PR11094: JIT breakpoint is not properly recreated on reruns
Even though this was supposedly in the gdb 7.2 timeframe, the testcase
in PR11094 crashes current GDB with a segfault:
Program received signal SIGSEGV, Segmentation fault.
0x00000000005ee894 in event_location_to_string (location=0x0) at
src/gdb/location.c:412
412 if (EL_STRING (location) == NULL)
(top-gdb) bt
#0 0x00000000005ee894 in event_location_to_string (location=0x0) at
src/gdb/location.c:412
#1 0x000000000057411a in print_breakpoint_location (b=0x18288e0, loc=0x0) at
src/gdb/breakpoint.c:6201
#2 0x000000000057483f in print_one_breakpoint_location (b=0x18288e0,
loc=0x182cf10, loc_number=0, last_loc=0x7fffffffd258, allflag=1)
at src/gdb/breakpoint.c:6473
#3 0x00000000005751e1 in print_one_breakpoint (b=0x18288e0,
last_loc=0x7fffffffd258, allflag=1) at
src/gdb/breakpoint.c:6707
#4 0x000000000057589c in breakpoint_1 (args=0x0, allflag=1, filter=0x0) at
src/gdb/breakpoint.c:6947
#5 0x0000000000575aa8 in maintenance_info_breakpoints (args=0x0, from_tty=0)
at src/gdb/breakpoint.c:7026
[...]
This is GDB trying to print the location spec of the JIT event
breakpoint, but that's an internal breakpoint without one.
If I add a NULL check, then we see that the JIT breakpoint is now
pending (because its location has shlib_disabled set):
(gdb) maint info breakpoints
Num Type Disp Enb Address What
[...]
-8 jit events keep y <PENDING> inf 1
[...]
But that's incorrect. GDB should have managed to recreate the JIT
breakpoint's location for the second run. So the problem is
elsewhere.
The problem is that if the JIT loads at the same address on the second
run, we never recreate the JIT breakpoint, because we hit this early
return:
static int
jit_breakpoint_re_set_internal (struct gdbarch *gdbarch,
struct jit_program_space_data *ps_data)
{
[...]
if (ps_data->cached_code_address == addr)
return 0;
[...]
delete_breakpoint (ps_data->jit_breakpoint);
[...]
ps_data->jit_breakpoint = create_jit_event_breakpoint (gdbarch, addr);
Fix this by deleting the breakpoint and discarding the cached code
address when the objfile where the previous JIT breakpoint was found
is deleted/unloaded in the first place.
The test that was originally added for PR11094 doesn't trip on this
because:
#1 - It doesn't test the case of the JIT descriptor's address _not_
changing between reruns.
#2 - And then it doesn't do "maint info breakpoints", or really
anything with the JIT at all.
#3 - and even then, to trigger the problem the JIT descriptor needs
to be in a separate library, while the current test puts it in
the main program.
The patch extends the test to cover all combinations of these
scenarios.
gdb/ChangeLog:
2016-10-06 Pedro Alves <palves@redhat.com>
* jit.c (free_objfile_data): Delete the JIT breakpoint and clear
the cached code address.
gdb/testsuite/ChangeLog:
2016-10-06 Pedro Alves <palves@redhat.com>
* gdb.base/jit-simple-dl.c: New file.
* gdb.base/jit-simple-jit.c: New file, factored out from ...
* gdb.base/jit-simple.c: ... this.
* gdb.base/jit-simple.exp (jit_run): Delete.
(build_jit): New proc.
(jit_test_reread): Recompile either the main program or the shared
library, depending on what is being tested. Skip changing address
if caller wants to. Compare before/after addresses. If testing
standalone, explicitly load the binary. Test "maint info
breakpoints".
(top level): Add "standalone vs shared lib" and "change address"
vs "same address" axes.
Pedro Alves [Thu, 6 Oct 2016 11:53:51 +0000 (12:53 +0100)]
Fix a few gdb.base/jit-simple.exp problems
I noticed that we sometimes get this:
(gdb) print &__jit_debug_descriptor
$1 = (struct jit_descriptor *) 0x601040 <__jit_debug_descriptor>
(gdb) PASS: gdb.base/jit-simple.exp: blah 1
[...]
(gdb) run
[...]
Starting program: build/gdb/testsuite/outputs/gdb.base/jit-simple/jit-simple
Unsupported JIT protocol version 4 in descriptor (expected 1)
Breakpoint 2, main () at src/gdb/testsuite/gdb.base/jit-simple.c:36
36 return 0;
(gdb) print &__jit_debug_descriptor
$2 = (struct jit_descriptor *) 0x601040 <__jit_debug_descriptor>
(gdb) PASS: gdb.base/jit-simple.exp: blah 1
All tests PASSed, but note the "Unsupported JIT protocol version 4"
message.
Also notice that "__jit_debug_descriptor" has the same address before
and after the rerun, while the test is built in a way that should make
that address change between runs.
The test doesn't catch any of this because it doesn't compare
before/after addresses.
And then notice the "blah 1" test messages. "blah" is clearly a WIP
message, but it should be at least "blah 2" the second time. :-)
The reason this sometimes happens is that the test recompiles the
program and expects gdb to reload it automaticallyt on "run". However,
if the original program and the new recompilation happen to be in the
same second, then gdb does not realize that the binary needs to be
reloaded. (This is an old problem out of scope of this series.) If
that happens, then GDB ends up using the wrong symbols for the program
that it spawns, reads the JIT descriptor out of the wrong address,
finds garbage, and prints that "unsupported version" notice.
Fix that in the same way gdb.base/reread.exp handles it -- by sleeping
one second before recompiling.
gdb/testsuite/ChangeLog:
2016-10-06 Pedro Alves <palves@redhat.com>
* gdb.base/jit-simple.exp (top level) Delete get_compiler_info
call.
(jit_run): Delete.
(jit_test_reread): Use with_test_prefix. Reload the main binary
explicitly. Compare the before/after addresses of the JIT
descriptor.
Tom Tromey [Thu, 6 Oct 2016 11:51:47 +0000 (12:51 +0100)]
Remove redundant assignment in gprof.
PR gprof/20656
* source.c (annotate_source): Delete redundant assignment to
new_line.
Matthew Fortune [Thu, 29 Sep 2016 10:13:46 +0000 (11:13 +0100)]
Refine .cfi_sections check to only consider compact eh_frame
The .cfi_sections directive can be safely used multiple times
with different sections named at any time unless the compact form
of exception handling is requested after CFI information has
been emitted. Only the compact form of CFI information changes
the way in which CFI is generated and therefore cannot be
retrospectively requested after generating CFI information.
gas/
PR gas/20648
* dw2gencfi.c (dot_cfi_sections): Refine the check for
inconsistent .cfi_sections to only consider compact vs non
compact forms.
* testsuite/gas/cfi/cfi-common-9.d: New file.
* testsuite/gas/cfi/cfi-common-9.s: New file.
* testsuite/gas/cfi/cfi.exp: Run new test.
Doug Evans [Thu, 6 Oct 2016 11:12:33 +0000 (12:12 +0100)]
Make "end" field in feature specs required again.
Newer gdbservers may be talking to older gdbs,
and older gdbs will flag a missing "end" as an error.
So just make "end" required again, and for compatibility
change the default field type to "bool".
gdb/ChangeLog:
2016-10-06 Doug Evans <dje@google.com>
* features/aarch64-core.xml (cpsr_flags): Elide "type" and specify
"end" in all fields.
* features/aarch64.c: Regenerate.
* features/i386/32bit-mpx.xml (_bndcfgu): Specify type of "preserved"
and "enabled" fields. Correct size of "enabled" field.
* features/i386/64bit-mpx.xml (_bndcfgu): Specify type of "preserved"
and "enabled" fields.
* features/i386/i386-avx-mpx-linux.c: Regenerate.
* features/i386/i386-avx-mpx.c: Regenerate.
* features/i386/i386-avx512-linux.c: Regenerate.
* features/i386/i386-avx512.c: Regenerate.
* features/i386/i386-mpx-linux.c: Regenerate.
* features/i386/i386-mpx.c: Regenerate.
* features/arc-arcompact.c: Regenerate.
* features/arc-v2.c: Regenerate.
* xml-tdesc.c (tdesc_start_field): Require "end" spec. Single bit
fields default to "bool" type.
Revert 2016-03-15 Doug Evans <dje@google.com>
* features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
* features/i386/32bit-sse.xml (i386_eflags): Ditto.
* features/i386/64bit-core.xml (i386_eflags): Ditto.
* features/i386/64bit-sse.xml (i386_eflags): Ditto.
* features/i386/x32-core.xml (i386_eflags): Ditto.
gdb/doc/ChangeLog:
2016-10-06 Doug Evans <dje@google.com>
* gdb.texinfo (Target Description Format): Update docs on "end"
field spec and field default type.
gdb/testsuite/ChangeLog:
2016-10-06 Doug Evans <dje@google.com>
* gdb.xml/extra-regs.xml: Update, end field now required, default type
for single bitfields is bool.
* gdb.xml/tdesc-regs.exp: Ditto.
GDB Administrator [Thu, 6 Oct 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Wed, 5 Oct 2016 07:47:02 +0000 (18:17 +1030)]
-Wimplicit-fallthrough warning fixes
Comment changes.
bfd/
* coff-h8300.c: Spell fall through comments consistently.
* coffgen.c: Likewise.
* elf32-hppa.c: Likewise.
* elf32-ppc.c: Likewise.
* elf32-score.c: Likewise.
* elf32-score7.c: Likewise.
* elf64-ppc.c: Likewise.
* elfxx-aarch64.c: Likewise.
* elfxx-mips.c: Likewise.
* cpu-ns32k.c: Add missing fall through comments.
* elf-m10300.c: Likewise.
* elf32-arm.c: Likewise.
* elf32-avr.c: Likewise.
* elf32-bfin.c: Likewise.
* elf32-frv.c: Likewise.
* elf32-i386.c: Likewise.
* elf32-microblaze.c: Likewise.
* elf32-nds32.c: Likewise.
* elf32-ppc.c: Likewise.
* elf32-rl78.c: Likewise.
* elf32-rx.c: Likewise.
* elf32-s390.c: Likewise.
* elf32-sh.c: Likewise.
* elf32-tic6x.c: Likewise.
* elf64-ia64-vms.c: Likewise.
* elf64-ppc.c: Likewise.
* elf64-s390.c: Likewise.
* elf64-x86-64.c: Likewise.
* elflink.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfnn-ia64.c: Likewise.
* ieee.c: Likewise.
* oasys.c: Likewise.
* pdp11.c: Likewise.
* srec.c: Likewise.
* versados.c: Likewise.
opcodes/
* aarch64-opc.c: Spell fall through comments consistently.
* i386-dis.c: Likewise.
* aarch64-dis.c: Add missing fall through comments.
* aarch64-opc.c: Likewise.
* arc-dis.c: Likewise.
* arm-dis.c: Likewise.
* i386-dis.c: Likewise.
* m68k-dis.c: Likewise.
* mep-asm.c: Likewise.
* ns32k-dis.c: Likewise.
* sh-dis.c: Likewise.
* tic4x-dis.c: Likewise.
* tic6x-dis.c: Likewise.
* vax-dis.c: Likewise.
binutils/
* dlltool.c: Spell fall through comments consistently.
* objcopy.c: Likewise.
* readelf.c: Likewise.
* dwarf.c: Add missing fall through comments.
* elfcomm.c: Likewise.
* sysinfo.y: Likewise.
* readelf.c: Likewise. Also remove extraneous comments.
gas/
* app.c: Add missing fall through comments.
* dw2gencfi.c: Likewise.
* expr.c: Likewise.
* config/tc-alpha.c: Likewise.
* config/tc-arc.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-cr16.c: Likewise.
* config/tc-crx.c: Likewise.
* config/tc-dlx.c: Likewise.
* config/tc-h8300.c: Likewise.
* config/tc-hppa.c: Likewise.
* config/tc-i370.c: Likewise.
* config/tc-i386.c: Likewise.
* config/tc-i960.c: Likewise.
* config/tc-ia64.c: Likewise.
* config/tc-m68hc11.c: Likewise.
* config/tc-m68k.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-metag.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mips.c: Likewise.
* config/tc-ns32k.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-score.c: Likewise.
* config/tc-score7.c: Likewise.
* config/tc-sh.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-vax.c: Likewise.
* config/tc-xstormy16.c: Likewise.
* config/tc-z80.c: Likewise.
* config/tc-z8k.c: Likewise.
* config/obj-elf.c: Likewise.
* config/tc-i386.c: Likewise.
* depend.c: Spell fall through comments consistently.
* config/tc-arm.c: Likewise.
* config/tc-d10v.c: Likewise.
* config/tc-i960.c: Likewise.
* config/tc-ia64.c: Likewise.
* config/tc-m68k.c: Likewise.
* config/tc-mcore.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-ns32k.c: Likewise.
* config/tc-visium.c: Likewise.
* config/tc-xstormy16.c: Likewise.
* config/tc-z8k.c: Likewise.
gprof/
* gprof.c: Add missing fall through comments.
ld/
* lexsup.c: Spell fall through comments consistently and add
missing fall through comments.
Alan Modra [Wed, 5 Oct 2016 06:14:07 +0000 (16:44 +1030)]
-Wimplicit-fallthrough noreturn fixes
binutils/
* cxxfilt.c (usage): Add ATTRIBUTE_NORETURN.
* elfedit.c (usage): Likewise.
* nm.c (usage): Likewise.
* objcopy.c (copy_usage, strip_usage): Likewise.
* srconv.c (show_usage): Likewise.
* strings.c (usage): Likewise.
* sysdump.c (show_usage): Likewise.
* srconv.c: Remove unneeded forward function declarations.
* strings.c: Likewise.
* sysdump.c: Likewise.
gas/
* as.h (as_assert): Add ATTRIBUTE_NORETURN.
Alan Modra [Wed, 5 Oct 2016 06:22:24 +0000 (16:52 +1030)]
-Wimplicit-fallthrough error fixes
Well, not all are errors, but a little more substantive than just
fiddling with comments.
bfd/
* coffcode.h (coff_slurp_symbol_table): Revert accidental commit
made 2015-01-08.
* elf32-nds32.c (nds32_elf_grok_psinfo): Add missing break.
* reloc.c (bfd_default_reloc_type_lookup): Add missing breaks.
opcodes/
* arc-ext.c (create_map): Add missing break.
* msp430-decode.opc (encode_as): Likewise.
* msp430-decode.c: Regenerate.
binutils/
* coffdump.c (dump_coff_where): Add missing break.
* stabs.c (stab_xcoff_builtin_type): Likewise.
gas/
* config/tc-arc.c (find_opcode_match): Add missing break.
* config/tc-i960.c (get_cdisp): Likewise.
* config/tc-metag.c (parse_swap, md_apply_fix): Likewise.
* config/tc-mt.c (md_parse_option): Likewise.
* config/tc-nds32.c (nds32_apply_fix): Likewise.
* config/tc-hppa.c (pa_ip): Assert rather than testing last
condition of multiple if statements.
* config/tc-s390.c (s390_exp_compare): Return 0 on error.
* config/tc-tic4x.c (tic4x_operand_parse): Add as_bad and break
out of case rather than falling into next case. Formatting.
ld/
* plugin.c (asymbol_from_plugin_symbol): Avoid compiler warning
by adding return.
Alan Modra [Wed, 5 Oct 2016 05:10:11 +0000 (15:40 +1030)]
[GOLD] -Wimplicit-fallthrough warning fixes
* aarch64.cc: Spell fall through comments as "// Fall through.".
* arm.cc: Likewise.
* mips.cc: Likewise.
* powerpc.cc: Likewise.
* s390.cc: Likewise.
* sparc.cc: Likewise.
* x86_64.cc: Likewise.
* powerpc.cc (Target_powerpc::Relocate::relocate): Add missing
fall through comments.
* sparc.cc: (Target_sparc::Scan::global): Likewise.
(Target_sparc::Relocate::relocate): Likewise.
* tilegx.cc (Target_tilegx::Relocate::relocate): Likewise.
* resolve.cc (symbol_to_bits): Add missing break.
Alan Modra [Wed, 5 Oct 2016 22:25:23 +0000 (08:55 +1030)]
bison warning fixes
* config/rl78-parse.y: Don't use deprecated %name-prefix.
* config/rx-parse.y: Likewise.
Alan Modra [Wed, 5 Oct 2016 21:38:25 +0000 (08:08 +1030)]
Don't use boolean OR in arithmetic expressions
bfd/
* elf32-epiphany.c (epiphany_final_link_relocate): Use bitwise
OR in arithmetic expression, not boolean OR.
opcodes/
* cr16-dis.c (print_insn_cr16): Don't use boolean OR in arithmetic.
* crx-dis.c (print_insn_crx): Likewise.
Jan Kratochvil [Wed, 5 Oct 2016 19:56:46 +0000 (21:56 +0200)]
testsuite: Fix recent GCC FAIL: gdb.arch/i386-signal.exp
gcc-6.2.1-2.fc24.x86_64
(gdb) backtrace 10^M
(gdb) FAIL: gdb.arch/i386-signal.exp: backtrace 10
(gdb) disas/s
Dump of assembler code for function main:
.../gdb/testsuite/gdb.arch/i386-signal.c:
30 {
0x000000000040057f <+0>: push %rbp
0x0000000000400580 <+1>: mov %rsp,%rbp
31 setup ();
0x0000000000400583 <+4>: callq 0x400590 <setup>
=> 0x0000000000400588 <+9>: mov $0x0,%eax
32 }
0x000000000040058d <+14>: pop %rbp
0x000000000040058e <+15>: retq
End of assembler dump.
The .exp patch is an obvious typo fix I think. The regex was written to
accept "ADDR in main" and I find it OK as checking .debug_line validity is not
the purpose of this testfile.
gcc-4.8.5-11.el7.x86_64 did not put the 'mov $0x0,%eax' instruction there at
all so there was no problem with .debug_line.
gdb/testsuite/ChangeLog
2016-10-05 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/i386-signal.exp (backtrace 10): Fix #2 typo.
Tom Tromey [Fri, 30 Sep 2016 21:45:26 +0000 (15:45 -0600)]
PR remote/20655 - small fix in handle_tracepoint_bkpts
handle_tracepoint_bkpts has two parallel "if"s. This changes the
second one to check ipa_error_tracepoint, which seems to be what was
intended.
2016-10-05 Tom Tromey <tom@tromey.com>
PR remote/20655:
* tracepoint.c (handle_tracepoint_bkpts): Check
ipa_error_tracepoint, not ipa_stopping_tracepoint.
Tom Tromey [Fri, 30 Sep 2016 21:43:40 +0000 (15:43 -0600)]
PR gdb/20653 - small cleanup in string_to_explicit_location
This bug points out that string_to_explicit_location compares a char*
against '\0'; whereas comparing against NULL is more normal.
2016-10-05 Tom Tromey <tom@tromey.com>
PR breakpoints/20653:
* location.c (string_to_explicit_location): Use NULL, not '\0'.
Tom Tromey [Fri, 30 Sep 2016 21:42:28 +0000 (15:42 -0600)]
PR symtab/20652 - fix psymbol_compare
This fixes an oversight in psymbol_compare.
2016-10-05 Tom Tromey <tom@tromey.com>
PR symtab/20652:
* psymtab.c (psymbol_compare): Correctly compare "ginfo.value"
fields.
Yao Qi [Wed, 5 Oct 2016 16:04:31 +0000 (17:04 +0100)]
Skip complex types tests if gdb_skip_float_test
If the target doesn't support float, we don't run float complex types
tests.
gdb/testsuite:
2016-10-05 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (support_complex_tests): Return zero if
gdb_skip_float_test return true.
Anton Kolesov [Wed, 5 Oct 2016 14:04:17 +0000 (17:04 +0300)]
Fix incorrect formatting of a ChangeLog entry
My previous commit had an invalid formatting of a ChangeLog entry. This commit
fixes that.
Andreas Arnez [Wed, 5 Oct 2016 10:36:29 +0000 (12:36 +0200)]
Allow DW_OP_GNU_uninit in dwarf_expr_require_composition
In DWARF expression handling, some operators are required to be either
at the end of an expression or followed by a composition operator. So
far only the operators DW_OP_reg0-31 were allowed to be followed by
DW_OP_GNU_uninit instead, and particularly DW_OP_regx was not, which is
obviously inconsistent.
This patch allows DW_OP_GNU_uninit after all operators requiring a
composition, to simplify the code and make it more consistent. This
policy may be more permissive than necessary, but in the worst case just
leads to a DWARF location description resulting in an uninitialized
value instead of an error message.
gdb/ChangeLog:
* dwarf2expr.c (dwarf_expr_require_composition): Allow
DW_OP_GNU_uninit.
(execute_stack_op): Use dwarf_expr_require_composition instead of
copying its logic.
Anton Kolesov [Wed, 5 Oct 2016 10:06:08 +0000 (13:06 +0300)]
arc: Remove annoying debug message
The logging message is called too often - once for each register when it's
value has to be evaluated. This floods the screen for commands like "info
register all", but doesn't give really any help at debugging GDB issues.
Between increasing the debug level of this message and removing it altogether I
think that removing it is preferable.
gdb/ChangeLog:
arc-tdep.c (arc_frame_prev_register): Remove annoying log message.
Yao Qi [Wed, 5 Oct 2016 09:00:24 +0000 (10:00 +0100)]
Update the path arm-*.xml files for aarch64
0a69eedb (Clean up the XML files for ARM) breaks the GDBserver build
on aarch64 because some arm-*.xml files can't be found.
This patch is to fix the build failure.
gdb/gdbserver:
2016-10-05 Yao Qi <yao.qi@linaro.org>
* configure.srv: Update the path of arm-*.xml files.
Yao Qi [Wed, 5 Oct 2016 08:31:13 +0000 (09:31 +0100)]
Regenerate some regformats/rs6000/*.dat files
If I remove all regformats/*.dat files and run
make GDB=/scratch/yao/gdb/build-git/all-targets/gdb/gdb all, some
powerpc .dat files are not generated.
This patch fixes it by adding them to WHICH, so these .dat files can
be generated.
gdb:
2016-10-05 Yao Qi <yao.qi@linaro.org>
* features/Makefile (WHICH): Add
rs6000/powerpc-isa205-32l, rs6000/powerpc-isa205-64l,
rs6000/powerpc-isa205-altivec32l, rs6000/powerpc-isa205-altivec64l,
rs6000/powerpc-isa205-vsx32l and rs6000/powerpc-isa205-vsx64l.
* regformats/rs6000/powerpc-isa205-32l.dat: Regenerated.
* regformats/rs6000/powerpc-isa205-64l.dat: Likewise.
* regformats/rs6000/powerpc-isa205-altivec32l.dat: Likewise.
* regformats/rs6000/powerpc-isa205-altivec64l.dat: Likewise.
* regformats/rs6000/powerpc-isa205-vsx32l.dat: Likewise.
* regformats/rs6000/powerpc-isa205-vsx64l.dat: Likewise.
Yao Qi [Wed, 5 Oct 2016 08:31:13 +0000 (09:31 +0100)]
Generate s390 target description c files
If I delete all target description c files under features/ directory,
and run make GDB=/scratch/yao/gdb/build-git/all-targets/gdb/gdb cfiles,
some s390 target description c files are not generated.
This patch adds these s390 xml files to XMLTOC, so these c files can
be generated.
gdb:
2016-10-05 Yao Qi <yao.qi@linaro.org>
* features/Makefile (XMLTOC): Add s390-tevx-linux64.xml,
s390-vx-linux64.xml, s390x-tevx-linux64.xml and
s390x-vx-linux64.xml.
Yao Qi [Wed, 5 Oct 2016 08:31:13 +0000 (09:31 +0100)]
Simplify i386, amd64 and x32 expedite registers
Nowadays, there are a lot of duplication about
i386/{i386, amd64, x32}*-expedite in features/Makefile. However,
in features/Makefile, we have
echo "expedite:$(if $($*-expedite),$($*-expedite),$($(firstword $(subst -, ,$(notdir $*)))-expedite))" \
>> $(outdir)/$*.tmp
which means for a given bar/foo-baz.xml, we'll look for either
bar/foo-baz-expedite or foo-expedite. In x86 expedite registers, we
use the former now, but it will be much simpler if we use the latter.
This is what this patch does. This patch removes them, and defines
three generic expedite. Re-run 'make GDB=/path/build/gdb all' to
regenerate regformats/*.dat files, and they are not changed.
gdb:
2016-10-05 Yao Qi <yao.qi@linaro.org>
* features/Makefile: Remove i386/*-expedite. Add i386-expedite,
amd64-expedite, and x32-expedite.
Yao Qi [Wed, 5 Oct 2016 08:31:13 +0000 (09:31 +0100)]
Clean up the XML files for ARM
This patch is move features/arm-*.xml to features/arm/, and it is based
on Terry's patch posted here
https://sourceware.org/ml/gdb-patches/2014-06/msg00794.html
One comment to Terry's patch is about losing "arm" prefix, and the new
patch fixes this problem.
gdb:
2016-10-05 Terry Guo <terry.guo@arm.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Adjust includes.
* features/Makefile (WHICH): Add "arm/" directory to arm
target descriptions.
(XMLTOC): Likewise.
(arm/arm-with-iwmmxt.dat): Adjust the path for
dependencies.
* features/arm-core.xml: Moved to ...
* features/arm/arm-core.xml: ... it.
* features/arm-fpa.xml: Moved to ...
* features/arm/arm-fpa.xml: ... it.
* features/arm-m-profile.xml: Moved to ...
* features/arm/arm-m-profile.xm: ... it.
* features/arm-vfpv2.xml: Moved to ...
* features/arm/arm-vfpv2.xm: ... it.
* features/arm-vfpv3.xml: Moved to ...
* features/arm/arm-vfpv3.xml: ... it.
* features/arm-with-iwmmxt.c: Moved to ...
* features/arm/arm-with-iwmmxt.c: ... it.
* features/arm-with-iwmmxt.xml: Moved to ...
* features/arm/arm-with-iwmmxt.xml: ... it.
* features/arm-with-m-fpa-layout.c: Moved to ...
* features/arm/arm-with-m-fpa-layout.c: ... it.
* features/arm-with-m-fpa-layout.xml: Moved to ...
* features/arm/arm-with-m-fpa-layout.xml: ... it.
* features/arm-with-m-vfp-d16.c: Moved to ...
* features/arm/arm-with-m-vfp-d16.c: ... it.
* features/arm-with-m-vfp-d16.xml: Moved to ...
* features/arm/arm-with-m-vfp-d16.xml: ... it.
* features/arm-with-m.c: Moved to ...
* features/arm/arm-with-m.c: ... it.
* features/arm-with-m.xml: Moved to ...
* features/arm/arm-with-m.xm: ... it.
* features/arm-with-neon.c: Moved to ...
* features/arm/arm-with-neon.c: ... it.
* features/arm-with-neon.xml: Moved to ...
* features/arm/arm-with-neon.xml: ... it.
* features/arm-with-vfpv2.c: Moved to ...
* features/arm/arm-with-vfpv2.c: ... it.
* features/arm-with-vfpv2.xml: Moved to ...
* features/arm/arm-with-vfpv2.xml: ... it.
* features/arm-with-vfpv3.c: Moved to ...
* features/arm/arm-with-vfpv3.c: ... it.
* features/arm-with-vfpv3.xml: Moved to ...
* features/arm/arm-with-vfpv3.xml: ... it.
* features/xscale-iwmmxt.xml: Moved to ...
* features/arm/xscale-iwmmxt.xml: ... it.
gdb/gdbserver:
2016-10-05 Terry Guo <terry.guo@arm.com>
Yao Qi <yao.qi@linaro.org>
* Makefile.in: Adjust the path of rules.
* configure.srv: Update the path of xml files.
* regformats/arm-with-iwmmxt.dat: Regenerated.
* regformats/arm-with-neon.dat: Likewise.
* regformats/arm-with-vfpv2.dat: Likewise.
* regformats/arm-with-vfpv3.dat Likewise.
GDB Administrator [Wed, 5 Oct 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Tue, 4 Oct 2016 00:13:50 +0000 (10:43 +1030)]
ld expression section
Changes the result of ld expressions that were previously plain
numbers to be an absolute address, in the same circumstances where
numbers are treated as absolute addresses.
* ld.texinfo (Expression Section): Update result of arithmetic
expressions.
* ldexp.c (arith_result_section): New function.
(fold_binary): Use it.
Alan Modra [Tue, 4 Oct 2016 00:11:26 +0000 (10:41 +1030)]
Fold arithmetic integer expressions
Commit
b751e639 regressed arm linux kernel builds, that have an
ASSERT (((__hyp_idmap_text_end - (__hyp_idmap_text_start
& ~ (((0x1 << 0xc) - 0x1))))
<= (0x1 << 0xc)), HYP init code too big or misaligned)
Due to some insanity in ld expression evaluation, the integer values
0x1 and 0xc above are treated as absolute addresses (ie. they have an
associated section, *ABS*, see exp_fold_tree_1 case etree_value) while
the expression (0x1 << 0xc) has a plain number result. The left hand
side of the inequality happens to evaluate to a "negative" .text
section relative value. Comparing a section relative value against an
absolute value works since the section relative value is first
converted to absolute. Comparing a section relative value against a
number just compares the offsets, which fails since the "negative"
offset is really a very large positive number.
This patch works around the problem by folding integer expressions, so
the assert again becomes
ASSERT (((__hyp_idmap_text_end - (__hyp_idmap_text_start
& 0xfffffffffffff000))
<= 0x1000), HYP init code too big or misaligned)
* ldexp.c (exp_value_fold): New function.
(exp_unop, exp_binop, exp_trinop): Use it.
GDB Administrator [Tue, 4 Oct 2016 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
Antoine Tremblay [Mon, 3 Oct 2016 20:55:35 +0000 (16:55 -0400)]
Add test for user context selection sync
This patch adds a test to verify that events are sent properly to all
UIs when the user selection context (inferior, thread, frame) changes.
The goal of the C test file is to provide two threads that are stopped with the
same predictable backtrace (so that we can test frame switching). The barrier
helps us know when the child threads are started. Then, scheduler-locking is
used to bring each thread one by one to the position we expect them to be
during the test.
gdb/testsuite/ChangeLog:
YYYY-MM-DD Antoine Tremblay <antoine.tremblay@ericsson.com>
YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20487
* gdb.mi/user-selected-context-sync.exp: New file.
* gdb.mi/user-selected-context-sync.c: New file.
Antoine Tremblay [Mon, 3 Oct 2016 20:52:44 +0000 (16:52 -0400)]
Emit inferior, thread and frame selection events to all UIs
With this patch, when an inferior, thread or frame is explicitly
selected by the user, notifications will appear on all CLI and MI UIs.
When a GDB console is integrated in a front-end, this allows the
front-end to follow a selection made by the user ont he CLI, and it
informs the user about selection changes made behind the scenes by the
front-end.
This patch addresses PR gdb/20487.
In order to communicate frame changes to the front-end, this patch adds
a new field to the =thread-selected event for the selected frame. The
idea is that since inferior/thread/frame can be seen as a composition,
it makes sense to send them together in the same event. The vision
would be to eventually send the inferior information as well, if we find
that it's needed, although the "=thread-selected" event would be
ill-named for that job.
Front-ends need to handle this new field if they want to follow the
frame selection changes that originate from the console. The format of
the frame attribute is the same as what is found in the *stopped events.
Here's a detailed example for each command and the events they generate:
thread
------
1. CLI command:
thread 1.3
MI event:
=thread-selected,id="3",frame={...}
2. MI command:
-thread-select 3
CLI event:
[Switching to thread 1.3 ...]
3. MI command (CLI-in-MI):
thread 1.3
MI event/reply:
&"thread 1.3\n"
~"#0 child_sub_function () ...
=thread-selected,id="3",frame={level="0",...}
^done
frame
-----
1. CLI command:
frame 1
MI event:
=thread-selected,id="3",frame={level="1",...}
2. MI command:
-stack-select-frame 1
CLI event:
#1 0x00000000004007f0 in child_function...
3. MI command (CLI-in-MI):
frame 1
MI event/reply:
&"frame 1\n"
~"#1 0x00000000004007f9 in ..."
=thread-selected,id="3",frame={level="1"...}
^done
inferior
--------
Inferior selection events only go from the console to MI, since there's
no way to select the inferior in pure MI.
1. CLI command:
inferior 2
MI event:
=thread-selected,id="3"
Note that if the user selects an inferior that is not started or exited,
the MI doesn't receive a notification. Since there is no threads to
select, the =thread-selected event does not apply...
2. MI command (CLI-in-MI):
inferior 2
MI event/reply:
&"inferior 2\n"
~"[Switching to inferior 2 ...]"
=thread-selected,id="4",frame={level="0"...}
^done
Internal implementation detail: this patch makes it possible to suppress
notifications caused by a CLI command, like what is done in mi-interp.c.
This means that it's now possible to use the
add_com_suppress_notification function to register a command with some
event suppressed. It is used to implement the select-frame command in
this patch.
The function command_notifies_uscc_observer was added to extract
the rather complicated logical expression from the if statement. It is
also now clearer what that logic does: if the command used by the user
already notifies the user_selected_context_changed observer, there is
not need to notify it again. It therefore protects again emitting the
event twice.
No regressions, tested on ubuntu 14.04 x86 with target boards unix and
native-extended-gdbserver.
gdb/ChangeLog:
YYYY-MM-DD Antoine Tremblay <antoine.tremblay@ericsson.com>
YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20487
* NEWS: Mention new frame field of =thread-selected event.
* cli/cli-decode.c (add_cmd): Initialize c->suppress_notification.
(add_com_suppress_notification): New function definition.
(cmd_func): Set and restore the suppress_notification flag.
* cli/cli-deicode.h (struct cmd_list_element)
<suppress_notification>: New field.
* cli/cli-interp.c (cli_suppress_notification): New global variable.
(cli_on_user_selected_context_changed): New function.
(_initialize_cli_interp): Attach to user_selected_context_changed
observer.
* command.h (struct cli_suppress_notification): New structure.
(cli_suppress_notification): New global variable declaration.
(add_com_suppress_notification): New function declaration.
* defs.h (enum user_selected_what_flag): New enum.
(user_selected_what): New enum flag type.
* frame.h (print_stack_frame_to_uiout): New function declaration.
* gdbthread.h (print_selected_thread_frame): New function declaration.
* inferior.c (print_selected_inferior): New function definition.
(inferior_command): Remove printing of inferior/thread/frame switch
notifications, notify user_selected_context_changed observer.
* inferior.h (print_selected_inferior): New function declaration.
* mi/mi-cmds.c (struct mi_cmd): Add user_selected_context
suppression to stack-select-frame and thread-select commands.
* mi/mi-interp.c (struct mi_suppress_notification)
<user_selected_context>: Initialize.
(mi_user_selected_context_changed): New function definition.
(_initialize_mi_interp): Attach to user_selected_context_changed.
* mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply.
(mi_execute_command): Handle notification suppression. Notify
user_selected_context_changed observer on thread change instead of printing
event directly. Don't send it if command already sends the notification.
(command_notifies_uscc_observer): New function.
(mi_cmd_execute): Don't handle notification suppression.
* mi/mi-main.h (struct mi_suppress_notification)
<user_selected_context>: New field.
* stack.c (print_stack_frame_to_uiout): New function definition.
(select_frame_command): Notify user_selected_context_changed
observer.
(frame_command): Call print_selected_thread_frame if there's no frame
change or notify user_selected_context_changed observer if there is.
(up_command): Notify user_selected_context_changed observer.
(down_command): Likewise.
(_initialize_stack): Suppress user_selected_context notification for
command select-frame.
* thread.c (thread_command): Notify
user_selected_context_changed if the thread has changed, print
thread info directly if it hasn't.
(do_captured_thread_select): Do not print thread switch event.
(print_selected_thread_frame): New function definition.
* tui/tui-interp.c (tui_on_user_selected_context_changed):
New function definition.
(_initialize_tui_interp): Attach to user_selected_context_changed
observer.
gdb/doc/ChangeLog:
PR gdb/20487
* gdb.texinfo (Context management): Update mention of frame
change notifications.
(gdb/mi Async Records): Document frame field in
=thread-select event.
* observer.texi (GDB Observers): New user_selected_context_changed
observer.
gdb/testsuite/ChangeLog:
PR gdb/20487
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Adapt
=thread-select-event check.
GDB Administrator [Mon, 3 Oct 2016 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 2 Oct 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 1 Oct 2016 00:00:27 +0000 (00:00 +0000)]
Automatic date update in version.in
Yao Qi [Fri, 30 Sep 2016 17:39:12 +0000 (18:39 +0100)]
PR 20627: Use resume_stop to stop lwp
Commit
049a8570 (Use target_continue{,_no_signal} instead of target_resume)
replaces the code stopping lwp with target_continue_no_signal in
target_stop_and_wait, like this,
- resume_info.thread = ptid;
- resume_info.kind = resume_stop;
- resume_info.sig = GDB_SIGNAL_0;
- (*the_target->resume) (&resume_info, 1);
+ target_continue_no_signal (ptid);
the replacement is not equivalent, and it causes PR 20627. This patch
is just to revert that change.
Regression testing it on x86_64-linux.
gdb/gdbserver:
2016-09-30 Yao Qi <yao.qi@linaro.org>
PR gdbserver/20627
* target.c (target_stop_and_wait): Don't call
target_continue_no_signal, use resume_stop instead.
projects / binutils-gdb.git / log