radeonsi: re-order the perfcounter hardware blocks

As documented in the comment, AMD GPUPerfStudio unfortunately hardcodes the
order of performance counter groups. Let's do the pragmatic thing and present
the same order as Catalyst/Crimson.

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: add GPIN driver query group

This group was used by older versions of AMD GPUPerfStudio (via
AMD_performance_monitor) to identify the GPU family, and GPUPerfStudio
still complains when it isn't available.

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Allow dumping LLVM IR before optimization passes

Set R600_DEBUG=preoptir to dump the LLVM IR before optimization passes,
to allow diagnosing problems caused by optimization passes.

Note that in order to compile the resulting IR with llc, you will first
have to run at least the mem2reg pass, e.g.

opt -mem2reg -S < shader.ll | llc -march=amdgcn -mcpu=bonaire

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> (original patch)
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (w/ debug flag)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: emit LLVM `ret void` before radeon_llvm_finalize_module

This allows dumping a consumable LLVM module before the initial optimization
passes are run.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: bail out of try_pbo_upload_common when constant upload fails

Also fixes a resource leak when an upload_mgr is used for constants.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: bail out of try_pbo_upload_common when vertex upload fails

At the same time, fix a memory leak noticed by Ilia Mirkin.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: reduce the scope of sampler_view in try_pbo_upload_common

We can get rid of our reference immediately, since the driver will hold
onto it for us.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: do uploads earlier in try_pbo_upload_common

While rather unlikely, uploads _can_ fail. Doing them earlier means
we'll have to restore less state when they do fail, and it's slightly
easier to check the restore code.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

main: Use a derived value for the default sample count

Previously the framebuffer default sample count was taken directly
from the value given by the application. On the i965 driver on HSW if
the value wasn't one that is supported by the hardware it would hit an
assert when it tried to program the state for it. This patch fixes it
by adding a derived sample count to the state for the default
framebuffer. The driver can then quantize this to one of the valid
values in its UpdateState handler when the _NEW_BUFFERS state changes.
_mesa_geometric_samples is changed to use the new derived value.

Fixes the piglit test arb_framebuffer_no_attachments-query

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93957
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

program: Use _mesa_geometric_samples to calculate gl_NumSamples

Otherwise it won't take into account the default samples for
framebuffers with no attachments.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

main: Use _mesa_geometric_samples to calculate GL_SAMPLE_BUFFERS

Otherwise it won't take into account the default samples for
framebuffers with no attachments.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

main: Use _mesa_geometric_samples to calculate the value of GL_SAMPLES

Otherwise it won't take into account the default samples for
framebuffers with no attachments.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0: avoid negatives in PUSH_SPACE argument

Fixup to commit 03b3eb90d - the number of buffers could be larger than
the number of elements, in which case we'd pass a negative argument to
PUSH_SPACE, which would be bad. While we're at it, merge it with the
other PUSH_SPACE at the top of the function.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nvc0: add some missing PUSH_SPACE's

nvc0_vbo has explicit push space checking enabled, so we must run
PUSH_SPACE by hand. A few spots missed that.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nvc0/ir: fix converting between predicate and gpr

The spill logic will insert convert ops when moving between files. It
seems like the emission logic wasn't quite ready for these converts.

Tested on fermi, and visually looked at nvdisasm output for maxwell.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nvc0: add support for ARB_query_buffer_object

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

st/mesa: add query buffer support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: add PIPE_CAP_QUERY_BUFFER_OBJECT

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: add a way to store query result into buffer

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add core implementation of ARB_query_buffer_object

Forwards query result writes to drivers.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add driver interface for writing query results to buffers

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: Handle QUERY_BUFFER_BINDING in GetIntegerv

Signed-off-by: Rafal Mielniczuk <rafal.mielniczuk2@gmail.com>
[imirkin: move to GL/GL_CORE section]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: Add QueryBuffer to context

Add QueryBuffer and initialise it to NullBufferObj on start

Signed-off-by: Rafal Mielniczuk <rafal.mielniczuk2@gmail.com>
[imirkin: also release QueryBuffer on free]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: Add ARB_query_buffer_object extension flag

Signed-off-by: Rafal Mielniczuk <rafal.mielniczuk2@gmail.com>
[imirkin: add string to extensions.c]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glapi: Add xml infrastructure for ARB_query_buffer_object

Signed-off-by: Rafal Mielniczuk <rafal.mielniczuk2@gmail.com>
[imirkin: move definition to gl_API.xml as it is very short]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl: simplify setting of image access qualifiers

Cc: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

mesa: remove dead program parameter functions

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

st/nine: Use align_free when needed

Use align_free to free memory allocated
with align_malloc.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Disallow non-argb8888 cursors

Only argb8888 cursors are allowed.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Enforce centroid for color input when multisampling is on

The color inputs must automatically use centroid whether
multisampling is used or not.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Fix centroid flag

sem.reg.mod & NINED3DSPDM_CENTROID is worth 4 when
centroid is requested, whereas
TGSI_INTERPOLATE_LOC_CENTROID is worth 1.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Use fast clears more often for MRTs

This enables to use fast clears in the following
case:

pixel shader renders to 1 RT
4 RT bound
clear
new pixel shader bound that renders to 4 RTs

Previously the fast clear path wouldn't be hit,
because when trying the fast clear path,
the framebuffer state would be configured for 1 RT,
instead of 4.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Use linear filtering for shadow mapping

Some docs say linear filtering is always used when
app does shadow mapping.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Respect block alignment on surface lock

Respect block alignment for ATI1/ATI2 format when trying to lock a
surface using LockRect().
Fixes failing WINE tests device.c test_surface_blocks() tests.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Add Render state validation layer

Testing Win behaviour seems to show wrong states
are accepted, but then depending on the states
some specific 'good' behaviours happen.

This adds some validation to catch invalid
states and have these 'good' behaviours
when it happens.

Also reorders SetRenderState to match the expected
optimisation:
(Value == previous Value) => return immediately,
which affects D3D9 hacks too.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>

DRI_CONFIG: Add option to override vendor id

Add config option override_vendorid to report a fake card in d3dadapter9 drm.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Implement NineDevice9_GetAvailableTextureMem

Implement a device private memory counter similar to Win 7.

Only textures and surfaces increment vidmem and may return
ERR_OUTOFVIDEOMEMORY. Vertexbuffers and indexbuffers creation always
succeedes, even when out of video memory.

Fixes "Vampire: The Masquerade - Bloodlines" allocating resources until crash.
Fixes "Age of Conan" allocating resources until crash.
Fixes failing WINE test device.c test_vidmem_accounting().

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Handle Window Occlusion

Apps can know if the window is occluded by checking for
specific error messages. The behaviour is different
for Device9 and Device9Ex.

This allow games to release the mouse and stop rendering
until the focus is restored.

In case of multiple swapchain we do care only of the device one.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Store minor version num

To keep compatible with older ID3DPresent interfaces (used to talk
with Wine), store the minor version num accessible to all
statetracker functions (in the NineDevice9 structure).

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Call flush_resource before flush

flush_resource needs to be called before flush (for
fast clear resolve, etc).

Removes useless computation of resource (it is
already set correctly).

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Fix remaining swapchain tests

Return D3DERR_INVALIDCALL instead of E_POINTER.
On error set ppBackBuffer to NULL.

Multiple swapchains can only be created in windowed mode as
windowed swapchain.

Set backbuffer to NULL in NineDevice9_GetBackBuffer, but not
in NineSwapChain9_GetBackBuffer.

This fixes all WINE's device.c test_swapchain() tests.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix crash NineDevice9_CreateAdditionalSwapChain

When no window is specified, we should revert to the focus window.

This deserves more tests however (what if the device swapchain is
already using the focus window ?)

Fixes crash for FFXIV

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Fix possible crash on error

In case swapchain creation fails This->swapchains[i] might be NULL and
causes a crash.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Test more presentation params

Return errors in case of invalid presentation parameters.
Fixes failing WINE tests device.c test_swapchain_parameters().

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix resource9 private data

Store a copy of GUID in the header that is under our control and use it
as key for the hashtable instead of using the application provided pointer.
The application might change the memory after leaving the function.

Fixes a crash for issue https://github.com/iXit/Mesa-3D/issues/130

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Print GUID instead of pointer

To ease debugging print the GUID instead of the pointer to it.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix use of uninitialized memory

The values of box.z and box.depth weren't set and lead to a crash.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix clear for multisample mismatch depth-stencil

Tests show in case of multisample mismatch between the depth-stencil
buffer and the render target, then it is not cleared.

Fixes failing WINE test visual.c test_multisample_mismatch().

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix Volumetexture9_LockBox

Check for valid locked box dimensions.

Fixes failing wine tests device.c test_lockbox_invalid.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix ATI2 pitch for non-square

Fixes crash for non-square textures.
We were using the height instead of the
width for some calculations.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Support D3DFMT_R8G8B8

Add support for D3DFMT_R8G8B8. It allows format conversion for
surfaces of pool scratch.

Usually gallium formats equivalents for d3d9 formats
have their names reversed.

The gallium format PIPE_FORMAT_R8G8B8_UNORM is the right
equivalent here, and its name is likely wrong (reversed).

Fixes a crash in TmNationsForever.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Use cso for viewport

Use CSO to catch redundant viewport changes.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix shade mode flat

Shade mode flat is only working if pixelshaders have interpolate
set to TGSI_INTERPOLATE_COLOR on color inputs.

Fixes failing WINE tests visual.c test_shademode().

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Clear rendertarget on creation

Clear every rendertarget on creation.
Fixes https://github.com/iXit/Mesa-3D/issues/139

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Allow ColorFill on D3DFMT_NULL surfaces

Report success instead of failing as there's no resource for those surfaces.
Fixes a crash in Crysis: Warhead.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Introduce STREAMFREQ state

Previous vertex elements code update
was protected by
'if ((group & (NINE_STATE_VDECL | NINE_STATE_VS)) ||
state->changed.stream_freq & ~1)'
itself protected by
'if (group & (NINE_STATE_COMMON | NINE_STATE_VS))'

If no state is changed except the stream frequency,
no update would happen.

This patch solves the problem by adding a new
NINE_STATE_STREAMFREQ state.
Another way would be to add state->changed.stream_freq & ~1
check to the main test.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Catch redundant SetStreamSourceFreq calls

Some apps do redundant SetStreamSourceFreq calls.
Catch them to improve performance.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Squash indexbuffer9 and vertexbuffer9

The indexbuffer9 codebase was lagging behind the one of vertexbuffer9.

Add buffer9 as common code base for indexbuffer9 and vertexbuffer9.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Unset vtxbuf on reset

We forgot to reset vtxbuf.
This fixes some crashes.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Use pipe_resource_reference for vtxbuf

This seems cleaner to actually reference the resources for vtxbuf,
rather than relying on the fact the bound d3d streams do.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Use ff vertex shader when position_t is used

When an application sets a vertex shader, we are supposed
to use it, and when no vertex shader are set, we are supposed
to revert to fixed function vertex shader.

It seems there is an exception: when the vertex declaration
has a position_t index, we should revert to fixed function
vertex shader.

Up to know we were checking if device->state.vs is set
to know whether to use programmable shader or not.

With this commit we determine whether we use programmable shader
or not when vertex shader/declaration are set, but
stateblocks do complicate things a bit.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Don't increment refcount on VertexDeclaration creation failure

NineUnknown_ctor increments the refcount even in case of an error.
Restructure the code to prevent refcount increments.
Fixes a couple of wine tests.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Change StretchRect check order

Textures in SYSTEMMEM don't have resources attached.
Instead of returning an error for them, StretchRect
was crashing.
This changes the check order to fix that case.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Initialize lights in stateblocks

This fixes a crash.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Fix fixed-function blendweights

The last weighted element is one minus the sum of all previous weights.
Fixes WINE test visual.c test_vertex_blending.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Always normalize hitDir

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Replace r[0] with tmp

Replace r[0] with tmp to ease code reading.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix ff calculation of midVec

In case of non local viewer the value has to be subtracted.
Fixes failing WINE tests in test_specular_lighting() (visual.c)

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Implement D3DRS_SPECULARENABLE

Implement fixed function D3DRS_SPECULARENABLE.
Fixes failing WINE tests in test_specular_lighting() (visual.c)

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix D3DRS_LOCALVIEWER being ignored

Set key->localviewer to D3DRS_LOCALVIEWER.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix rounding issue with vs1.1 a0 reg

vs1.1 rounds a0 to lowest integer, while
other versions do round to closest.

To use the same path as the other versions (with ARR),
we were substracting 0.5 for vs1.1 to get round to lowest.

This gives wrong result if a0 is set to 0:
round(0 - 0.5) = -1

Instead just use ARL for vs1.1

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Fix D3DPMISCCAPS_FOGANDSPECULARALPHA support

The documentation of the flag doesn't make sense.
To sum up the doc, if not set, specular alpha contains fog,
and if set specular alpha contains 0 (except for ff).

However in practice when the flag is there, apps do use specular alpha
as if it could be used normally, which makes much more sense than the doc.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Fix AlphaCmpCaps

AlphaCmpCaps should advertise D3DPCMPCAPS_NEVER as well.

Fixes https://github.com/iXit/Mesa-3D/issues/142

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

radeonsi: implement PK2H and UP2H opcodes

Based on a gallivm patch by Ilia Mirkin.

+8 piglit regressions due to precision issues (I blame the tests)

The benefit is that we'll get v_cvt_f32_f16 and v_cvt_f16_f32 instead
of emulation with integer instructions. They are GLSL 4.00 intrinsics.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

glsl: Ensure glsl/ exists before making the lexer/parser.

Reported-by: Jan Ziak <0xe2.0x9a.0x9b@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93989

i965/fs: Allocate single register at a time for constants.

No instruction counts changed, but:

  total cycles in shared programs: 64834502 -> 64781530 (-0.08%)
  cycles in affected programs: 16331544 -> 16278572 (-0.32%)
  helped: 4757
  HURT: 4288

  GAINED: 66
  LOST:   20

I remember trying this when I first wrote the pass, but it wasn't
helpful at the time.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

radeonsi: fix Hyper-Z on Stoney

Cc: 11.0 11.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

mesa: Use SSE prefetch instructions rather than 3DNow instructions

64-bit Pentium 4 CPUs don't have the 3DNow prefetch instructions
which results in an Illegal instruction crash.

Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Tested-by: Timothy Arceri <t_arceri@yahoo.com.au>
https://bugs.freedesktop.org/show_bug.cgi?id=27512

nv50/ir: make sure to fetch all sources before creating instruction

We must fetch all sources into the instruction stream before generating
the instruction that uses them. Otherwise we'll define values after
using them, which won't work so well.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nv50: avoid freeing the symbols if they're about to be stored

Spotted by Coverity

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

st/mesa: fix potential null deref if no shader is passed in

Spotted by Coverity

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

glx: update to updated version of EXT_create_context_es2_profile

The EXT spec has been updated to:
 - logically combine the es2_profile and es_profile exts
 - allow any legal version to be requested

dEQP tests request a specific ES version when using GLX, so this allows
dEQP upstream to run against GLX with the appropriate X server patch
(which had similar disabling logic).

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matt Turner <mattst88@gmail.com> (v1)
Reviewed-by: Adam Jackson <ajax@redhat.com> (v3)
v1 -> v2:
 - distinguish between DRI_API_GLES{,2,3}
 - add GLX_EXT_create_context_es_profile client-side support
v2 -> v3:
 - fix error in computing mask

dir-locals.el: set case-label offset to 0

While this is the default, private .emacs files might have it set to
something else. No harm in forcing it to 0.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

appveyor: Bump shallow clone depth.

To prevent build failures when a large patch series is committed, like
happened in https://ci.appveyor.com/project/jrfonseca-fdo/mesa/build/322
due to 10 commits between dac2964f3ebd96d5ac227984ab0cd79c2c3b2a1a and
6f428328d34bed16edb8709e4a117eb710d7893d where submitted before the
build slave started the git clone.

100 commits should be bigger than any patch series seen in practice, and
it takes practically the same time to download as 5 commits.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

Revert "compiler: removed unused Makefile.sources"

Whoops, didn't mean to push this one.

This reverts commit 78f4c555b93eb0951dcd9c5812109d506dd03023.

compiler: fix .gitignore for glsl_compiler

Signed-off-by: Rob Clark <robclark@freedesktop.org>

compiler: removed unused Makefile.sources

We seem to end up w/ duplication between compiler/Makefile.sources and
compiler/glsl/Makefile.sources.  The latter appears unused.  Delete it.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

gallium: fix the documentation of PIPE_CAP_MAX_TEXTURE_BUFFER_SIZE

This parameter is equivalent to the corresponding OpenGL implementation
limit which is in texels, not bytes.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: support PIPE_CAP_SURFACE_REINTERPRET_BLOCKS

This is already used internally in si_resource_copy_region for compressed
textures, so the only real change here is the adjusted surface size
computation.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

st/mesa: implement PBO upload for glCompressedTex(Sub)Image

v2:
- use st->pbo_upload.enabled flag

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

st/mesa: redirect CompressedTexSubImage to our own implementation

This is where PBO upload will go.

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

st/mesa: inline the implementation of _mesa_store_compressed_teximage

We will write our own version of texsubimage for PBO uploads, and we will
want to call that here as well.

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

st/mesa: implement PBO upload for multiple layers

Use instancing to generate two triangles for each destination layer and use
a geometry shader to route the layer index.

v2:
- directly write layer in VS if supported by the driver (Marek Olšák)

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

st/mesa: Accelerate PBO uploads

Create a PIPE_BUFFER sampler view on the pixel-unpack buffer, and draw
the image on the texture with a fragment shader that maps fragment
coordinates to buffer coordinates.

Modifications by Nicolai Hähnle:
- various cleanups and fixes (e.g. error handling, corner cases)
- split try_pbo_upload into two functions, which will allow code to be
  shared with compressed texture uploads
- modify the source format selection to only test for support against
  the PIPE_BUFFER target

v2:
- update handling of TGSI_SEMANTIC_POSITION for recent changes in master
- MaxTextureBufferSize is number of texels, not bytes (Ilia Mirkin)
- only enable when integers are supported (Marek Olšák)
- try harder to hit the TextureBufferOffsetAlignment
- remove unnecessary MOV from the fragment shader

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

st/mesa: use the correct address generation functions in st_TexSubImage blit

We need to tell the address generation functions about the dimensionality of
the texture to correctly implement the part of Section 3.8.1 (Texture Image
Specification) of the OpenGL 2.1 specification which says:

    "For the purposes of decoding the texture image, TexImage2D is
    equivalent to calling TexImage3D with corresponding arguments
    and depth of 1, except that
      ...
      * UNPACK SKIP IMAGES is ignored."

Fixes a low impact bug that was found by chance while browsing the spec and
extending piglit tests.

Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

gallium: Add PIPE_CAP_SURFACE_REINTERPRET_BLOCKS

This cap indicates whether pipe->create_surface can reinterpret a texture
as a surface with a format of different block width/height (but equal
block size).

v2: fix whitespace

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

gallium: Add PIPE_CAP_BUFFER_SAMPLER_VIEW_RGBA_ONLY

This cap indicates that the driver only supports R, RG, RGB and RGBA
formats for PIPE_BUFFER sampler views.

v2: move into "unsupported features" section for nouveau (Ilia Mirkin)

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

mesa: add MESA_NO_MINMAX_CACHE environment variable

When set to a truish value, this globally disables the minmax cache for all
buffer objects.

No #ifdef DEBUG guards because this option can be interesting for
benchmarking.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

vbo: disable the minmax cache when the hit rate is low

When applications stream their index buffers, the caches for those BOs become
useless and add overhead, so we want to disable them. The tricky part is
coming up with the right heuristic for *when* to disable them.

The first question is which hit rate to aim for. Since I'm not aware of any
interesting borderline applications that do something like "draw two or three
times for each upload", I just kept it simple.

The second question is how soon we should give up on the caching. Applications
might have a warm-up phase where they fill a buffer gradually but then keep
reusing it. For this reason, I count the number of indices that hit and miss
(instead of the number of calls that hit or miss), since comparing that to
the size of the buffer makes sense.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add USAGE_DISABLE_MINMAX_CACHE flag to buffer UsageHistory

Reviewed-by: Marek Olšák <marek.olsak@amd.com>