* dwarf2read.c (struct die_info): Make members tag, num_attrs 16 bits.

*** empty log message ***

daily update

* hppa-linux-tdep.c (hppa_linux_supply_fpregset): Correct iteration.

Add new tests for z80

Fix bugs in the disassembly of some ld-instructions

    * defs.h (GCC_GENERATED_STDINT_H): Define.

Fix Opcode generation of ld a,(bc) and ld a,(de) on target z80

*** empty log message ***

daily update

* varobj.c (varobj_set_display_format): Use xfree.
* tracepoint.c (stringify_collection_list): Use xfree.
* remote-fileio.c (remote_fileio_reset): Use xfree.
* mipsread.c (read_alphacoff_dynamic_symtab): Use xfree.
* dfp.c (decimal_from_floating): Use xfree, xstrprintf.  Don't use
asprintf.
* cp-support.c (mangled_name_to_comp): Use xfree.

    * ada-lang.c (remove_extra_symbols): Remove stub symbols if
        the associated complete symbol is also in the list.
        (ada_add_local_symbols, ada_add_non_local_symbols): New functions,
        extracted out from ada_lookup_symbol_list.
        (ada_lookup_symbol_list): Use them.  Remove the search through
        the minimal symbols.

    * dwarf2read.c (add_partial_subprogram): New procedure.
        (scan_partial_symbols): Use it.
        (load_partial_dies): Read in children of subprogram and lexical
        blocks for Ada compilation units.

* gdb.mi/mi-nonstop.exp: Do not check thread state while a
stop is pending.  Avoid ".*" when two stops are pending.
* lib/gdb.exp (fullname_syntax_POSIX, fullname_syntax_UNC)
(fullname_syntax_DOS_CASE, fullname_syntax_DOS): Do not match
newlines in fullnames.
* lib/mi-support.exp (mi_run_cmd): Do not require an anchor.
(mi_expect_stop): Update comments.  Only anchor in sync mode.
Do not match newlines.
(mi_send_resuming_command_raw): Always return status.
(mi_get_stop_line): Do not match more than one line by accident.
Only anchor in sync mode.
(mi_run_inline_test): If -exec-next fails, give up.

* symfile.c (build_id_verify): Free 'found'.
(find_separate_debug_file): Use xfree, not free.

*** empty log message ***

daily update

* corefile.c (write_memory): Remove unnecessary copying.

* sol-thread.c (_initialize_sol_thread): Add FIXME regarding
order of _initialize_* fns.

* dwarf2read.c (comp_unit_head): Rename first_die_ptr to
first_die_offset.  All uses updated.
Delete unused members cu_head_ptr, next.
Move members base_known, base_address to ...
(dwarf2_cu) ... here.  All uses updated.

2008-09-12  Sterling Augustine  <sterling@tensilica.com>
* config/tc-xtensa.c (init_op_placement_info_table): Allow number of
operands equal to MAX_INSN_ARGS.

gdb/
* Makefile.in (generated_files): Add $(NAT_GENERATED_FILES).
* config/i386/i386gnu.mh (NAT_GENERATED_FILES): New.

gdb/doc/
* gdbint.texinfo (Native Debugging): Mention NAT_GENERATED_FILES.

2008-09-11  Chris Demetriou  <cgd@google.com>

        * options.h (origin): New -z option.
        * layout.cc (Layout:finish_dynamic_section): If "-z origin"
        is specified, set DF_ORIGIN in DT_FLAGS and set DF_1_ORIGIN
        in DT_FLAGS_1.

daily update

*** empty log message ***

gas/testsuite/

2008-09-11  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/sse2avx.s: Remove pclmulXXX tests.  Add tests for
Intel syntax.
* gas/i386/x86-64-sse2avx.s: Likewise.

* gas/i386/sse2avx.d: Updated.
* gas/i386/x86-64-sse2avx.d: Likewise.

opcodes/

2008-09-11  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.tbl: Fix memory operand size for cmpXXXs[sd].
* i386-tbl.h: Regenerated.

bfd/
Fix loading large elf64 binaries on 32bit hosts.
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.

binutils/
Fix loading large elf64 binaries on 32bit hosts.
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.

gas/
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.

gprof/
* configure.in: Call AC_SYS_LARGEFILE.
* gconfig.in: Regenerate.
* configure: Regenerate.

ld/
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.

libiberty/
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.

* gdb.base/stack-checking.c (big_frame): Reduce stack consumption
on SPU.

* fork-child.c (startup_inferior): Use target_wait and target_resume
directly instead of calling wait_for_inferior / resume.

* infcmd.c (kill_if_already_running): Do not call no_shared_libraries
or init_wait_for_inferior.
(run_command_1): Call init_wait_for_inferior.

Add missing ChangeLog entry.

* gdbtypes.h (builtin_type_void_data_ptr, builtin_type_void_func_ptr,
builtin_type_CORE_ADDR, builtin_type_char, builtin_type_short,
builtin_type_int, builtin_type_long, builtin_type_signed_char,
builtin_type_unsigned_char, builtin_type_unsigned_short,
builtin_type_unsigned_int, builtin_type_unsigned_long,
builtin_type_float, builtin_type_double, builtin_type_long_double,
builtin_type_complex, builtin_type_double_complex, builtin_type_string,
builtin_type_bool, builtin_type_long_long,
builtin_type_unsigned_long_long): Remove macros.

(builtin_type_f_character, builtin_type_f_integer,
builtin_type_f_integer_s2, builtin_type_f_logical,
builtin_type_f_logical_s1, builtin_type_f_logical_s2,
builtin_type_f_real, builtin_type_f_real_s8, builtin_type_f_real_s16,
builtin_type_f_complex_s8, builtin_type_f_complex_s16,
builtin_type_f_complex_s32): Likewise.

(builtin_type_m2_char, builtin_type_m2_int, builtin_type_m2_card,
builtin_type_m2_real, builtin_type_m2_bool): Likewise.

(struct builtin_f_type, builtin_f_type): Move to f-lang.h.
(struct builtin_m2_type, builtin_m2_type): Move to m2-lang.h.

* f-lang.h (struct builtin_f_type, builtin_f_type): Move here.
* m2-lang.h (struct builtin_m2_type, builtin_m2_type): Move here.

* solib-svr4.c (LM_ADDR_FROM_LINK_MAP): Use builtin types of
target_gdbarch instead of builtin_type_void_data_ptr.
(LM_DYNAMIC_FROM_LINK_MAP, LM_NEXT, LM_NAME,
IGNORE_FIRST_LINK_MAP_ENTRY, scan_dyntag, elf_locate_base,
solib_svr4_r_map, solib_svr4_r_brk, solib_svr4_r_ldsomap,
open_symbol_file_object): Likewise.
* nto-tdep.c (LM_ADDR): Likewise.

* bsd-uthread.c (bsd_uthread_read_memory_address): New function.
(bsd_uthread_fetch_registers, bsd_uthread_store_registers,
bsd_uthread_wait, bsd_uthread_find_new_threads): Use it.

* procfs.c (procfs_address_to_host_pointer): Use target_gdbarch
and its associated types to perform pointer conversion.
(procfs_can_use_hw_breakpoint): Likewise.
(procfs_auxv_parse): Remove unused variable.

* auxv.c (default_auxv_parse): Use gdbarch_ptr_bit (target_gdbarch)
instead of builtin_type_void_data_ptr.
* target.c (default_region_ok_for_hw_watchpoint): Likewise.

* expprint.c (print_subexp_standard): Compare against builtin type
associated with exp->gdbarch instead of builtin_type_char.

* f-valprint.c (f_val_print): Use extract_unsigned_integer to
extract values of arbitrary logical type.  Handle arbitrary
complex types.

* printcmd.c (float_type_from_length): New function.
(print_scalar_formatted, printf_command): Use it.

* valops.c: Include "objfiles.h" and "symtab.h".
(find_function_in_inferior): New argument OBJF_P.  Use it to return
objfile where function is defined.  Use per-objfile arch types
instead of builtin_type_ to define default return type.

* linux-fork.c (checkpoint_command): Update calls.  Use per-objfile
architecture to define inferior call argument types.
* gcore.c (derive_heap_segment): Likewise.
* objc-lang.c (value_nsstring): Likewise.
* scm-lang.c (scm_lookup_name): Likewise.
* scm-valprint.c (scm_inferior_print): Likewise.
* valops.c (value_allocate_space_in_inferior): Likewise.

* eval.c (evaluate_subexp_standard): Update calls.
* objc-lang.c (lookup_objc_class, print_object_command): Likewise.

* linux-fork.c: Include "objfiles.h".
* scm-lang.c: Include "objfiles.h".
* scm-valprint.c: Include "objfiles.h".

ChangeLog:

* gdbarch.sh (name_of_malloc): Remove.
* gdbarch.c, gdbarch.h: Re-generate.
* valops.c (value_allocate_space_in_inferior): Do not call
gdbarch_name_of_malloc.

doc/ChangeLog:

* gdbint.texinfo (Target Conditionals): Remove documentation
for gdbarch_name_of_malloc.

* valarith.c (value_x_unop): Use builtin_type_int8 as type for
UNOP_POSTINCREMENT/UNOP_POSTDECREMENT constant 0 argument.
(value_bit_index): Use extract_unsigned_integer
instead of unpack_long to read single byte.

* infcall.c (value_arg_coerce): Add GDBARCH parameter.  Use its
associates types instead of builtin_type_ macros.
(find_function_addr): Leave output VALUE_TYPE NULL if unknown.
(call_function_by_hand): Use per-architecture "int" type as
fall-back if find_function_addr returns NULL VALUE_TYPE.
Update call to value_arg_coerce.

* cp-abi.h (cplus_method_ptr_size): Add TO_TYPE parameter.
(cplus_make_method_ptr): Add TYPE parameter.
* cp-abi.c (cplus_method_ptr_size): Add TO_TYPE parameter.  Pass it
on to current_cp_abi.method_ptr_size callback.
(cplus_make_method_ptr): Add TYPE parameter.  Pass it on to
current_cp_abi.make_method_ptr callback.

* gdbtypes.c (lookup_methodptr_type): Pass target type
argument to cplus_method_ptr_size.
* valops.c (value_cast): Pass type argument to cplus_make_method_ptr.
(value_struct_elt_for_reference): Likewise.

* gnu-v3-abi.c (get_class_arch): New function.
(vtable_address_point_offset): Add GDBARCH parameter.  Use it
instead of current_gdbarch.  Update all callers.
(gnuv3_get_vtable): Likewise.
(gnuv3_get_virtual_fn): Likewise.
(gnuv3_decode_method_ptr): Likewise.
(gnuv3_rtti_type): Call get_class_arch to determine architecture.
Use it instead of current_gdbarch.
(gnuv3_virtual_fn_field): Likewise.
(gnuv3_baseclass_offset): Likewise.
(gnuv3_print_method_ptr): Likewise.
(gnuv3_method_ptr_to_value): Likewise.
(gnuv3_method_ptr_size): Add TYPE parameter.  Use it to determine
class architecture.  Use architecture types instead of builtin types.
(gnuv3_make_method_ptr): Likewise.

* cp-valprint.c (cp_print_class_member): Expect pointer type
instead of class type.  Use its length when extracting value.
* c-valprint.c (c_val_print): Update call to cp_print_class_member.

* stack.c (return_command): Use frame architecture to determine
default integer return type.

* f-valprint.c (f77_get_dynamic_lowerbound): Use frame architecture
to determine pointer types.
(f77_get_dynamic_upperbound): Likewise.

* objc-lang.c (OBJC_FETCH_POINTER_ARGUMENT): Remove.
(resolve_msgsend): Use architecture of current frame to determine
pointer types.  Inline OBJC_FETCH_POINTER_ARGUMENT.
(resolve_msgsend_stret, resolve_msgsend_super,
resolve_msgsend_super_stret): Likewise.

* alpha-tdep.c (alpha_register_type): Use builtin_type (gdbarch)
instead of builtin_type_ macros.
* amd64-tdep.c (amd64_register_type): Likewise.
(amd64_get_longjmp_target): Likewise.
* arm-tdep.c (arm_register_type): Likewise.
* avr-tdep.c (avr_register_type): Likewise.
* cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
* frv-tdep.c (frv_register_type): Likewise.
* h8300-tdep.c (h8300_register_type): Likewise.
* hppa-tdep.c (hppa32_convert_from_func_ptr_addr,
hppa_skip_trampoline_code): Likewise.
* i386-tdep.c (i386_register_type): Likewise.
(i386_unwind_pc, i386_sse_type): Likewise.
* ia64-tdep.c (ia64_register_type): Likewise.
* m32r-tdep.c (m32r_register_type): Likewise.
* m68k-tdep.c (m68k_register_type, m68k_unwind_pc): Likewise.
* m88k-tdep.c (m88k_register_type): Likewise.
* mep-tdep.c (mep_register_type): Likewise.
* mips-tdep.c (mips_pseudo_register_type): Likewise.
* mn10300-tdep.c (mn10300_register_type): Likewise.
* mt-tdep.c (mt_copro_register_type): Likewise.
* rs6000-tdep.c (rs6000_builtin_type_vec64): Likewise.
(rs6000_convert_register_p, rs6000_register_to_value,
rs6000_value_to_register): Likewise.
* s390-tdep.c (s390_register_type): Likewise.
* sh64-tdep.c (sh64_register_type): Likewise.
(sh64_build_float_register_type, sh64_do_fp_register): Likewise.
* sh-tdep.c (sh_sh2a_register_type, sh_sh3e_register_type,
sh_sh4_build_float_register_type, sh_sh4_register_type,
sh_default_register_type): Likewise.
* sparc64-tdep.c (sparc64_register_type): Likewise.
* sparc-tdep.c (sparc32_register_type): Likewise.
* spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
* v850-tdep.c (v850_register_type): Likewise.
* vax-tdep.c (vax_register_type): Likewise.
* xtensa-tdep.c (xtensa_register_type, xtensa_unwind_pc,
xtensa_push_dummy_call): Likewise.

* std-regs.c (value_of_builtin_frame_fp_reg,
value_of_builtin_frame_pc_reg): Likewise.
* target-descriptions.c (tdesc_register_type): Likewise.

* ada-lang.c (ada_coerce_to_simple_array_type): Use builtin_type_int32
instead of builtin_type_int as default unspecified integral type.
(ada_index_type, ada_array_bound_from_type, ada_variant_discrim_type,
assign_component, to_fixed_range_type): Likewise.
* ada-typeprint.c (print_range, print_range_bound,
print_range_type_named): Likewise.
* ada-valprint.c (print_optional_low_bound, ada_val_print_1): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* gnu-v2-abi.c (gnuv2_virtual_fn_field): Likewise.
* gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
build_gdb_vtable_type): Likewise.
* jv-lang.c (java_array_type): Likewise.
* m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Likewise.
* m2-valprint.c (m2_print_long_set): Likewise.
* parse.c (follow_types): Likewise.
* p-typeprint.c (pascal_type_print_base): Likewise.
* valops.c (value_one, value_array, value_string,
value_bitstring): Likewise.
* value.c (allocate_repeat_value, value_from_string): Likewise.
* varobj.c (c_describe_child): Likewise.
* mt-tdep.c (mt_register_type): Likewise.
* sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
* sh64-tdep.c (sh64_build_float_register_type): Likewise.

* defs.h (struct gdbarch): Add forward declaration.
(set_next_address): Add GDBARCH argument.
* printcmd.c (set_next_address): Use it to find pointer type.
* breakpoint.c (breakpoint_1): Update call.
* source.c (line_info): Likewise.
* findcmd.c (find_command): Use current_gdbarch to find pointer type.

* breakpoint.c (set_breakpoint_count): Use platform-neutral
types for internal variable values.
* infrun.c (handle_inferior_event): Likewise.
* source.c (forward_search_command, reverse_search_command): Likewise.
* tracepoint.c (set_tracepoint_count, set_traceframe_num,
set_tracepoint_num, set_traceframe_context): Likewise.

* gdbtypes.h (struct builtin_type): Remove builtin_true_char
and builtin_true_unsigned_char.
(builtin_type_true_char): Remove macro, add extern declaration.
(builtin_type_true_unsigned_char): Add extern declaration.
* gdbtypes.c (builtin_type_true_char): New global variable.
(builtin_type_true_unsigned_char): Likewise.
(_initialize_gdbtypes): Initialize them.
(gdbtypes_post_init): Do not initialize builtin_true_char
and builtin_true_unsigned_char members of struct builtin_type.

* printcmd.c (print_scalar_formatted): Do not use builtin_type;
use builtin_type_true_unsigned_char instead.

* ada-valprint.c (ada_val_print_1): Use builtin_type_true_char
instead of builtin_type_char for internal string.

* gdbtypes.h (builtin_type_void): Remove macro, add declaration.
(builtin_type_f_void): Remove macro.
* gdbtypes.c (builtin_type_void): New global variable.
(_initialize_gdbtypes): Initialize it.

* gnu-v3-abi.c (build_gdb_vtable_type): Do not call
lookup_pointer_type or lookup_function_type on builtin_type_void.
* printcmd.c (set_next_address): Likewise.
* objc-lang.c (value_nsstring): Likewise.
* mt-tdep.c (mt_copro_register_type): Likewise.
* xtensa-tdep.c (xtensa_register_type): Likewise.

* symfile.c (syms_from_objfile): Remove special handling
of builtin_type_void and builtin_type_char.

* eval.c (evaluate_subexp_standard): Use exp->gdbarch types instead
of builtin_type_ macros when handling OP_OBJC_ operations.
* objc-lang.c (print_object_command): Likewise.

* ada-valprint.c: Include "objfiles.h".
(ada_val_print_1): Use the gdbarch associated with the objfile whether
a System.Address type is defined to retrieve the proper pointer type
to use to print it.

* ada-lang.c (value_pos_atr): Add TYPE argument.  Use it as
result type instead of builtin_type_int.
(value_subscript_packed): Use pos_atr instead of value_pos_atr.
(ada_value_subscript): Update call to value_pos_atr.
(ada_value_ptr_subscript): Likewise.
(ada_evaluate_subexp): Likewise.

* ada-lang.c (cast_to_fixed): Do not cast to builtin_type_double.
(cast_from_fixed_to_double): Rename to ...
(cast_from_fixed): ... this.  Add TYPE parameter.  Use it instead
of builtin_type_double.
(ada_value_cast): Use cast_from_fixed instead of casting result
of cast_from_fixed_to_double.
(ada_evaluate_subexp): Update calls to cast_from_fixed_to_double.

* valops.c (value_ind): No longer allow dereferencing an
integer type.
* eval.c (evaluate_subexp_standard): Handle deferencing an
integer type here.
* ada-lang.c (ada_evaluate_subexp): Likewise.

* ada-valprint.c (ada_val_print_1): When implicitly dereferencing
a reference type, pass the reference type directly to unpack_pointer.
* c-valprint.c (c_val_print): Likewise.
* f-valprint.c (f_val_print): Likewise.
* m2-valprint.c (print_variable_at_address, m2_val_print): Likewise.
* p-valprint.c (pascal_val_print): Likewise.

* eval.c (evaluate_subexp_standard): Use builtin_type_int8
to construct the EVAL_SKIP dummy return value.
* ada-lang.c (ada_evaluate_subexp): Likewise.
* jv-lang.c (evaluate_subexp_java): Likewise.
* m2-lang.c (evaluate_subexp_modula2): Likewise.
* scm-lang.c (evaluate_exp): Likewise.

* value.h (coerce_enum, coerce_number): Remove prototypes.
* value.c (coerce_enum, coerce_number): Remove.
* valarith.c (value_x_binop): Do not call coerce_enum.
(value_x_unop): Likewise.
(value_logical_not): Call coerce_array instead of coerce_number.

* ax-gdb.c: Include "language.h".
(gen_frame_args_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
(gen_frame_locals_address): Likewise.
(gen_var_ref): Add GDBARCH parameter.  Update calls to
gen_frame_args_address and gen_frame_locals_address.  Use
pointer type from gdbarch.
(gen_usual_unary): Add EXP parameter.  Use integer type
from exp->gdbarch.
(gen_usual_arithmetic): Likewise.
(gen_integral_promotions): Likewise.
(gen_add, gen_sub): Remove.
(gen_ptradd, gen_ptrsub, gen_ptrdiff): New functions.
(gen_logical_not): Use passed-in boolean result type
instead of builtin_type_int.
(gen_complement): Do not call gen_usual_unary or
gen_integral_promotions.
(gen_struct_ref): Call require_rvalue instead of gen_usual_unary.
(gen_repeat): Add EXP parameter.  Update call to gen_expr.
Use builtin_type_int32 as internal range type.
(gen_sizeof): Add EXP and SIZE_TYPE parameters.  Use SIZE_TYPE
as result type.  Update call to gen_expr.
(gen_expr): Add EXP parameter.  Update calls to gen_expr,
gen_repeat, gen_var_ref, gen_usual_unary, gen_usual_arithmetic,
and gen_integral_promotions.  Call gen_ptradd, gen_ptrsub,
gen_ptrdiff, or gen_binop instead of gen_add or gen_sub.
Use exp->gdbarch instead of current_gdbarch.
Call language_bool_type to determine result type of UNOP_LOGICAL_NOT.

* eval.c (evaluate_subexp_standard): Add calls to binop_promote
and unop_promote before calling value_binop et. al.
* ada-lang.c (ada_evaluate_subexp): Add calls to binop_promote
and unop_promote before calling value_binop et. al.

* valarith.c (value_binop): Do not call binop_promote or unop_promote.
(value_pos): Do not call unop_promote.
(value_neg, value_complement): Likewise.

* value.h (unop_promote, binop_promote): Add prototypes.
* eval.c (unop_promote, binop_promote): New functions.
* valarith.c (unop_result_type, binop_result_type): Remove.
(value_binop): Call binop_promote or unop_promote.
Inline remaining parts of binop_result_type.  Remove special
code to truncate integer values for unsigned operations.
(value_pos): Call unop_promote.  Inline remaining parts of
unop_result_type.
(value_neg, value_complement): Likewise.

* value.h (value_add, value_sub): Remove.
(value_ptradd, value_ptrsub, value_ptrdiff): Add prototypes.
* valarith.c (value_add, value_sub): Remove.
(value_ptradd, value_ptrsub, value_ptrdiff): New functions.
(find_size_for_pointer_math): Add assertion.  Update comment.
(value_binop): Update comment.

* eval.c (ptrmath_type_p): New function.
(evaluate_subexp_standard): Replace value_add and value_sub
by value_ptradd, value_ptrsub, value_ptrdiff or value_binop.
Use builtin_type_uint8 instead of builtin_type_char to hold
the increment for BINOP_{PRE,POST}{IN,DE}CREMENT operations.
* valarith.c (value_subscript): Replace value_add by
value_ptradd.  Replace value_sub by value_binop.
* ada-lang.c (ada_value_ptr_subscript): Likewise.
(ada_tag_name_2): Replace value_add by value_ptradd.
(ada_evaluate_subexp): Replace value_add and value_sub by
value_binop.
* m2-lang.c (evaluate_subexp_modula2): Replace value_add
by value_ptradd.
* gnu-v2-abi.c (gnuv2_virtual_fn_field): Likewise.
* gnu-v3-abi.c (gnuv3_method_ptr_to_value): Likewise.

* eval.c (evaluate_subexp_for_sizeof): Use builtin_int type of
the expression architecture instead of builtin_type_int as the
sizeof return type.

* expression.h (enum exp_opcode): Document OP_COMPLEX to take
a type parameter as expression element.
* eval.c (evaluate_subexp_standard) [OP_COMPLEX]: Retrieve result
type as expression element.
* f-exp.y: Pass in type when buildin OP_COMPLEX expression.
* parse.c (operator_length_standard): Update length of OP_COMPLEX.

* language.h (struct language_arch_info): New members
bool_type_default and bool_type_symbol.
(lang_bool_type): Remove prototype.
(LA_BOOL_TYPE): Remove macro.
(language_bool_type): Add prototype.
* language.c (lang_bool_type): Remove.
(language_bool_type): New function.

* value.h (value_in): Change return value to int.
* value.c (value_in): Return int instead of struct value *.

* eval.c (evaluate_subexp_standard): Call language_bool_type instead
of using LA_BOOL_TYPE.  Update call to value_in.
* ada-lang.c (ada_evaluate_subexp): Call language_bool_type instead
of using LA_BOOL_TYPE or builtin_type_int for boolean values.

* language.c (unknown_language_arch_info): Set bool_type_default member
of struct language_arch_info.
* ada-lang.c (ada_language_arch_info): Set bool_type_symbol and
bool_type_default members of struct language_arch_info.
* c-lang.c (c_language_arch_info): Set bool_type_default member
of struct language_arch_info.
(cplus_language_arch_info): Set bool_type_symbol and bool_type_default
members of struct language_arch_info.
* f-lang.c (f_language_arch_info): Set bool_type_symbol and
bool_type_default members of struct language_arch_info.
* jv-lang.c (java_language_arch_info): Set bool_type_symbol and
bool_type_default members of struct language_arch_info.
* m2-lang.c (m2_language_arch_info): Set bool_type_symbol and
bool_type_default members of struct language_arch_info.
* p-lang.c (p_language_arch_info): Set bool_type_symbol and
bool_type_default members of struct language_arch_info.

* jv-lang.c (enum java_primitive_types): New type.
(java_language_arch_info): New function.
(java_language): Use it instead of c_language_arch_info.

* value.h (value_bitstring_subscript): New prototype.
* valarith.h (value_bitstring_subscript): New function.
(value_subscript): No longer handle TYPE_CODE_BITSTRING.
* eval.c (evaluate_subexp_standard): Call value_bitstring_subscript
instead of value_subscript to handle TYPE_CODE_BITSTRING.

* expression.h (struct expression): New member GDBARCH.
* parse.c (parse_exp_in_context): Initialize it.
* parser-def.h (parse_gdbarch, parse_language): New macros.

* ada-exp.y (parse_type): New macro.
Replace builtin_type_ macros by using parse_type.
Replace current_language by parse_language.
* ada-lex.l (processInt): Replace current_gdbarch by parse_gdbarch.
Replace builtin_type_ macros.

* c-exp.y (parse_type): New macro.
Replace builtin_type_ macros by using parse_type.
(parse_number): Replace current_gdbarch by parse_gdbarch.
(yylex): Replace current_language by parse_language.

* f-exp.y (parse_type, parse_f_type): New macros.
Replace builtin_type_ macros by using parse_{f_,}type.
(parse_number): Replace current_gdbarch by parse_gdbarch.
(yylex): Replace current_language by parse_language.

* jv-exp.y (parse_type): New macro.
(parse_number): Replace builtin_type_ macros by using parse_type.

* m2-exp.y (parse_type, parse_m2_type): New macros.
Replace builtin_type_ macros by using parse_{m2_,}type.

* objc-exp.y (parse_type): New macro.
Replace builtin_type_ macros by using parse_type.
(parse_number): Replace current_gdbarch by parse_gdbarch.
(yylex): Replace current_language by parse_language.

* p-exp.y (parse_type): New macro.
Replace builtin_type_ macros by using parse_type.
(parse_number): Replace current_gdbarch by parse_gdbarch.
(yylex): Replace current_language by parse_language.

* parser-defs.h (write_exp_msymbol): Remove TEXT_SYMBOL_TYPE
and DATA_SYMBOL_TYPE arguments.
* parse.c (write_exp_msymbol): Remove TEXT_SYMBOL_TYPE and
DATA_SYMBOL_TYPE arguments.  Replace use of builtin_type_CORE_ADDR.
(write_dollar_variable): Update call.

* ada-exp.y (write_var_or_type): Update call.
* c-exp.y: Likewise.
* f-exp.y: Likewise.
* jv-exp.y: Likewise.
* m2-exp.y: Likewise.
* objc-exp.y: Likewise.
* p-exp.y: Likewise.

Updated translation versions

*** empty log message ***

daily update

    * ada-lang.c (ada_parent_type): Add handling of the case where
        the _parent field is a pointer and/or has a parallel XVS type.
        (ada_evaluate_subexp) [OP_VAR_VALUE]: When doing an
        EVAL_AVOID_SIDE_EFFECTS evaluation of a tagged type, return
        the type of the tag instead of doing forcing an EVAL_NORMAL
        expression evaluation.

    * ada-lang.c (is_digits_suffix): New function.
        (is_dot_digits_suffix): Remove.
        (ada_lookup_symbol_list): Remove digits suffix from minimal symbols
        before looking up in symbol table, and do not use wild matches on them.
        (wild_match): Reimplement for speed and to allow matching of operator
        symbols.
        (is_valid_name_for_wild_match): Return zero for names that do not
        follow the GNAT encoding.

        (is_name_suffix): Fix typo in comment.
        (to_record_with_fixed_variant_part): Ditto.

* Makefile.in (gnu-nat.o): New rule.

2008-09-05  Cary Coutant  <ccoutant@google.com>

* fileread.cc (File_read::make_view): Add check for attempt to map
beyond end of file.

    * gdb.ada/Makefile.in (EXECUTABLES): Bring up to date.

    * gdb.ada/array_bounds.exp, gdb.ada/array_subscript_addr.exp,
        gdb.ada/arrayidx.exp, gdb.ada/arrayparam.exp, gdb.ada/arrayptr.exp,
        gdb.ada/assign_1.exp, gdb.ada/boolean_expr.exp,
        gdb.ada/char_param.exp, gdb.ada/exprs.exp, gdb.ada/fixed_cmp.exp,
        gdb.ada/fixed_points.exp, gdb.ada/fun_addr.exp,
        gdb.ada/funcall_param.exp, gdb.ada/homonym.exp,
        gdb.ada/interface.exp, gdb.ada/null_array.exp,
        gdb.ada/packed_array.exp, gdb.ada/packed_tagged.exp,
        gdb.ada/print_chars.exp, gdb.ada/print_pc.exp,
        gdb.ada/str_ref_cmp.exp, gdb.ada/sym_print_name.exp,
        gdb.ada/taft_type.exp, gdb.ada/tagged.exp, gdb.ada/type_coercion.exp:
        Include the "= " sequence in the expected output of print tests.

    * gdb.ada/packed_tagged.exp: Accept "boolean" as a valid type
        description for boolean types.

    * ada-lang.c (ada_evaluate_subexp) [OP_ATR_SIZE]: Use
        archecture-neutral builtin_type_int32 instead of builtin_type_int.

    * ada-lang.c (ada_evaluate_subexp) [BINOP_ADD, BINOP_SUB]:
        Add special handling for pointer types.

* inf-ttrace.c (inf_ttrace_follow_fork): Declare locals at the
right scope level.
(inf_ttrace_resume, inf_ttrace_wait): Typos.

* ada-lang.c (ada_array_length): Use builtin_type_int32 instead
of builtin_type_int.
(ada_evaluate_subexp) [UNOP_IN_RANGE]: Use operand range type
instead of builtin_type_int.

*** empty log message ***

daily update

gdb/
* infrun.c (normal_stop): Run hook-stop last.

gdb/testsuite/
* gdb.base/hook-stop-continue.c: New.
* gdb.base/hook-stop-continue.exp: New.

merge from gcc

* gnu-nat.c (gnu_pid_to_exec_file): Delete.
(init_gnu_ops): Don't register it.

gas/
* config/tc-ppc.c (ppc_setup_opcodes): Simplify POWER4/NOPOWER4 test.
Remove POWER5 and POWER6 tests.

gas/testsuite/
* gas/ppc/common.s: New test.
* gas/ppc/common.d: Likewise.
* gas/ppc/power4_32.s: Likewise.
* gas/ppc/power4_32.d: Likewise.
* gas/ppc/power6.s: Add attn, mtcr, mtcrf, mfcr, dcbz.
* gas/ppc/power6.d: Likewise.
* gas/ppc/ppc.exp: Run power4_32 test.

* gnu-nat.c (gnu_attach): Push target before fetching the list of
threads.

* emultempl/pe.em (pe_find_data_imports): Add trailing newline
  to warning message.
  * emultempl/pep.em (pep_find_data_imports): Likewise.

* elfxx-mips.c (mips16_stub_symndx) <sec>: Mark argument as
unused.

* config/tc-hppa.c (hppa_regname_to_dw2regnum): Add register name to
number support for 32-bit targets.

daily update

*** empty log message ***

* valops.c (value_cast_structs): Return NULL for failure.
(value_cast): Handle NULL from value_cast_structs.
(value_fetch_lazy): Call check_typedef.  Remove unused variable.

testsuite/
* gdb.base/structs3.c, gdb.base/structs3.exp: New files.

* inferior.h (context_switch_to): Delete.
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.

* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.

* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread.  Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.

* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.

* infrun.c (context_switch): Don't context-switch the continuations.

PR ld/3191
* dwarf2.c (struct adjusted_section): Renamed from struct
loadable_section.
(struct dwarf2_debug): Adjust for renaming.  Add version field.
(read_attribute_value): Correctly handle DW_FORM_ref_addr for
DWARF3.
(find_abstract_instance_name): Pass a pointer to
attribute instead of offset.  For DW_FORM_ref_addr, get the
entry at the offset from the .debug_info section.
(scan_unit_for_symbols): Update.
(parse_comp_unit): Allow DWARF3.  Save the version.
(unset_sections): Update for renaming.
(place_sections): Likewise.  Set new VMAs for DWARF sections
also.

Remove global continuations in favour of a per-thread
continuations.

* gdbthread.h (struct thread_info): Add comments around
continuations and intermediate_continuations.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments.
* infrun.c (fetch_inferior_event): Only call normal_stop if
stop_soon is NO_STOP_QUIETLY.
(context_switch): Don't context-switch the continuations.
* thread.c (clear_thread_inferior_resources): Discard all
continuations of the thread we're clearing.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments, and the code referencing
them.
* utils.c: Include "gdbthread.h".
(cmd_continuation, intermediate_continuation): Delete.
(add_continuation): Add thread_info* argument.  Install the
continuation on it.
(restore_thread_cleanup): New.
(do_all_continuations_ptid, do_all_continuations_thread_callback):
New.
(do_all_continuations): Reimplement.
(discard_all_continuations_thread_callback,
discard_all_continuations_thread): New.
(discard_all_continuations): Reimplement.
(add_intermediate_continuation): Add thread_info* argument.
Install the continuation on it.
(do_all_intermediate_continuations_thread_callback)
(do_all_intermediate_continuations_thread): New.
(do_all_intermediate_continuations): Reimplement.
(discard_all_intermediate_continuations_thread_callback): New.
(discard_all_intermediate_continuations_thread): New.
(discard_all_intermediate_continuations): Reimplement.

* breakpoint.c (until_break_command): Install the continuation on
the current thread.

* defs.h (cmd_continuation, intermediate_continuation): Delete.
(struct thread_info): Forward declare.
(add_continuation, add_intermediate_continuation): Add
thread_info* argument.
(do_all_continuations_thread, discard_all_continuations_thread)
(do_all_intermediate_continuations_thread)
(discard_all_intermediate_continuations_thread): Declare.
* inf-loop.c (inferior_event_handler): In non-stop only run
continuations on the thread that stopped.  In all-stop, run
continuations on all threads.
* infcmd.c (step_once, finish_command): Adjust.

Remove the global stop_step in favour of a per-thread
stop_step.

* inferior.h (stop_step): Delete.

* gdbthread.h (struct thread_info): Add comments to stop_step.
(save_infrun_state, load_infrun_state): Remove stop_step argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_step argument, and references to it.

* infrun.c (clear_proceed_status): Clear stop_step.
(fetch_inferior_event): Adjust.
(context_switch): Don't context-switch stop_step.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.

* infcmd.c (stop_step): Delete.
(step_1, step_1_continuation, step_once, until_next_command):
Adjust.

Remove the global step_multi in favour of a per-thread
step_multi.

* inferior.h (step_multi): Delete.
* gdbthread.h (struct thread_info): Add comments around
step_multi.
(save_infrun_state, load_infrun_state): Remove step_multi
parameter.
* thread.c (load_infrun_state, save_infrun_state): Remove
step_multi argument, and references to it.
* infcmd.c (step_multi): Delete.
(step_1): Adjust.
(step_1_continuation, until_next_command): Adjust.
* infrun.c (fetch_inferior_event): Adjust.
(context_switch): Don't context-switch step_multi.
(print_stop_reason, normal_stop): Adjust.

Remove the global stop_signal in favour of a per-thread
stop_signal.

* inferior.h (stop_signal): Delete.
* gdbthread.h (save_infrun_state, load_infrun_state): Remove
stop_signal argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_signal argument.  Don't reference it.

* infcmd.c (stop_signal): Delete.
(program_info): Adjust.
* infrun.c (resume): Clear stop_signal.
(proceed): Adjust.  Pass the last stop_signal to the thread we're
resuming.
(context_switch): Don't context-switch stop_signal.
(handle_inferior_event, keep_going): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.

* fbsd-nat.c: Include "gdbthread.h".
(find_signalled_thread, find_stop_signal): New.
(fbsd_make_corefile_notes): Use it.
* fork-child.c (startup_inferior): Adjust.

* linux-nat.c (get_pending_status): Adjust.
(linux_nat_do_thread_registers): Adjust.
(find_signalled_thread, find_stop_signal): New.
(linux_nat_do_thread_registers): Add stop_signal parameter.
(struct linux_nat_corefile_thread_data): Add stop_signal member.
(linux_nat_corefile_thread_callback): Pass stop_signal.
(linux_nat_do_registers): Delete.
(linux_nat_make_corefile_notes): Use find_stop_signal.  Assume
there's always a thread.

* procfs.c (find_signalled_thread, find_stop_signal): New.
(find_stop_signal): New.
(procfs_do_thread_registers): Add stop_signal parameter.
(struct procfs_corefile_thread_data): Add stop_signal member.
(procfs_corefile_thread_callback): Pass args->stop_signal.
(procfs_make_note_section): Find the last stop_signal.

* solib-irix.c: Include gdbthread.h.
(irix_solib_create_inferior_hook): Adjust.
* solib-osf.c: Include gdbthread.h.
(osf_solib_create_inferior_hook): Adjust.
* solib-sunos.c: Include gdbthread.h.
(sunos_solib_create_inferior_hook): Adjust.
* solib-svr4.c: Include gdbthread.h.
(svr4_solib_create_inferior_hook): Adjust.

* win32-nat.c (do_initial_win32_stuff): Adjust.