Merge branch 'kconfig-update' of git://git.busybox.net/~tpetazzoni/git/buildroot

mplayer: Update mplayer to version 1.0rc2.

Closes #331.

- Remove patches applied upstream
 - Add updated avr32 patch from Hans-Christian Egtvedt.

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xf86-video-intel: Fixed cross-compile patch to apply to version 2.4.2

Signed-off-by: Maurice van der Pot <griffon26@kfk4ever.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xconfig: Save the configuration properly in qconf

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xconfig: Change titlebar to Buildroot Configuration

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

config: Add support for xconfig

It involved:

 * Modifying the top-level Makefile to create the xconfig target, and
   the $(CONFIG)/qconf target to compile the qconf utility

 * Modifying the package/config/Makefile magic so that C++ files and
   binaries gets linked properly, re-using the
   package/config/Makefile.kconfig logic inherited from the kernel

 * Hacking a little bit package/config/Makefile.kconfig in a way
   similar to the modifications done for the mconf (menuconfig
   interface)

Signed-off-by: Alper Yildirim <ayildirim@aselsan.com>

config: Update package/config to Kconfig 2.6.30

Update the package/config stuff with the code available in the Linux
kernel 2.6.30.

Signed-off-by: Alper Yildirim <ayildirim@aselsan.com>

Merge branch 'qt' of git://git.busybox.net/~tpetazzoni/git/buildroot

qt: the GUI module requires the network module to work properly

Running a simple Qt GUI application on an embedded systems without
QtNetwork installed doesn't work, the dynamic loader complains that
QtNetwork is not present.

While I'm not a Qt build system expert, it looks like this dependency
really exists, since the src/gui/gui.pri file in Qt sources contains
the following line:

embedded: QT += network

Which would mean that the GUI module needs the network module to
operate properly. And a few files in src/gui/embedded/ also include
some QtNetwork stuff. This isn't really surprising since the Qt QWS
mechanism uses communication between processes through a Unix socket.

Therefore, we add a dependency on the network module in the GUI
module. We use a 'select' dependency here, since it's might not be
really obvious to the user that the GUI module requires the network
one.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs: describe BR2_ROOTFS_POST_BUILD_SCRIPT

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt: fix build with external toolchain

Set QMAKE_LFLAGS so that at link time --sysroot is passed to the
linker, and Qt finds the external libraries. This fixes Qt build when
zlib or other libraries are external, instead of using Qt's internal
copy.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Update CHANGES with recent improvements

Mention X.org and external toolchain improvements in the CHANGES file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: Clean up locale support menu

Closes #421.

This patch cleans up and fixes some minor issues with the locale support
section of the toolchain menu.

1. uClibc requires wchar support if locales are enabled, make locale
   support select wchar support.

2.  Allow purging of locale information even if there is no locale
    support in the C library.  This cleans up after packages that
    install things into /usr/share/locale on the target.

Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/uClibc: add patch to rename getline to get_line in unifdef.c

getline() is a standard libc function with a different signature.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/iso9660: fix mkisofs build for !i686

Use HOST_ARCH instead of hardcoded i686. The build still could use
some cleanup though.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/iso9660: needs a linux kernel

Closes #403.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/device/xtensa: only override makedevs target for xtensa builds

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bmon: new package

Closes #389.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netstat-nat: new package

Closes #3597.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnl: new package

Closes #287.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 2.6.27.x stable version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/Makefile.in: remove hurd reference

Missed by b6192fb9752a.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add support for custom post-build script

The config help text says it all:

  Specify a script to be run after the build has finished and before
  the BR2 starts packing the files into selected packages.

  This gives users the oportunity to do board-specific cleanups,
  add-ons and the like, so the generated files can be used directly
  without further processing.

  The script is called with the target directory name as first and
  only argument. Make sure the exit code of that script is 0,
  otherwise make will stop after calling it.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/gnuconfig: xtensa patch

New file missing from cd0b1ce3b

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/device/KwikByte: remove unused 2.6.20 config

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/: remove hurd kernel placeholder

Incomplete and unlikely to get completed in the near future - Pretty
much like hurd itself.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/Config.in: remove reference to target/linux/Config.in.experimental

File doesn't exist any more.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/uclibc: xtensa patches

New files missing from 58050c28.

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux-advanced: remove unused ancient kernel versions

More than 2 years old, and no in tree users.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 2.6.30.x stable version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Merge branch 'xorg' of git://git.busybox.net/~tpetazzoni/git/buildroot

Merge branch 'master' of git://git.buildroot.net/~ulf/git/linux

[XTENSA] Remove Copyright notes. They contradict GPL license.

Signed-off-by: Maxim Grigoriev <maxim@tensilica.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt: put the Qt options into a submenu

Put the Qt options into a submenu to make the configuration interface
easier to use. The comment on the dependency on C++ has to be put
before the menuconfig definition, otherwise kconfig gets confused and
doesn't put the suboptions into a submenu.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt: rename qtopia4 to qt

A while ago, Trolltech (now part of Nokia) included Qtopia directly
inside Qt. So let's rename the qtopia4 package to simply qt, which
will be more familiar to our users. Of course, the version we compile
is Qt for Embedded Linux.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg: remove the XSERVER variable

The XSERVER variable used to be defined by package/Makefile.in because
the X server package name was different depending on the type of X
server that was choosen. Nowadays, the name of the package is always
xserver_xorg-server, so there's no point in having this XSERVER
intermediate variable.

This patch makes all packages use xserver_xorg-server directly as a
dependency, and removes the XSERVER variable from package/Makefile.in.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg: remove references to non-existing configuration options

The option BR2_PACKAGE_TINY, BR2_PACKAGE_XORG and BR2_PACKAGE_XGGI
don't exist, so do not use them to find the value of the $(XSERVER)
variable.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg: use BR2_PACKAGE_XORG instead of BR2_PACKAGE_XSERVER_none

The BR2_PACKAGE_XSERVER_none option has gone, so use BR2_PACKAGE_XORG7
instead. It is more logical to test if BR2_PACKAGE_XORG7 is set to
know if an X.org server is available, than testing if
BR2_PACKAGE_XSERVER_none is set to know if an X.org server is *not*
available.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg: remove reference to non-existing BR2_PACKAGE_XSERVER_none

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg server: remove dependencies

Currently, the X.org server selection always trigger the compilation
and installation of libXt (the X toolkit) and libXaw (Athena Widget
toolkits), which is are legacy toolkits not used by modern toolkits
(Gtk, Qt, etc.). They are only used by old X11 applications that are
typically not used on embedded systems.

Not compiling them save compilation time, and more importantly, space
on the target.

We also remove the compilation on xlib_libxkbui, libxmu and libxpm,
because they all depend on libXt.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg server: beautify list of dependencies

Reorganize the list of depencies with a sane indentation level, and
one dependency per line. Yes, the list is long, but is easier to read,
and future patches modifying this list will be easier to review.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

matchbox: fix dependencies

A dependency on BR2_PACKAGE_XORG7 is enough, no need to depend on
BR2_PACKAGE_XORG_XSERVER.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dillo: use select for library dependencies

Use select independs of depends on for library dependencies. We keep
the depends on for the X.org dependency so that dillo can only be
selected once X.org is enabled (which, contrary to the library
dependencies, is a pretty obvious dependency for the user). We then
get rid of the configuration interface comment.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

midori: remove configuration comment on X.org dependency

The dependency of Midori on X.org should be pretty obvious to the
user, and we don't want to unnecessarly clutter the configuration
interface with comments.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Update kernel "latest" major/minor version numbers
including adding support for 2.6.30/2.6.31-rc#

Remove unused file: "target/linux/Config.in.experimental"

TODO: remove outdated stuff

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: add #163 + #473

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Makefile: apply xtensa specific TARGET_SKELETON_PATCH if available

Part of #163.

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: xtensa toolchain patch support

Part of #163.

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/patch-kernel.sh: xtensa directory overlay support

Part of #163.

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/uclibc: xtensa support

Part of #163.

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

project: xtensa specific ARCH handling

Part of #163.

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/; xtensa support

Part of #163.

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/gnuconfig: xtensa support

Part of #163.

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/Makefile.in: xtensa host support

Part of #163.

Signed-off-by: Maxim Grigoriev <maxim2405@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libmms: new package

LibMMS is a common library for parsing mms:// and mmsh:// type network
streams.

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/gcc: bump 4.4.x version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux26: do not set CFLAGS_KERNEL to TARGET_CFLAGS

Using TARGET_CFLAGS breaks the kernel build for the arm platform. The
result is a kernel that can not be booted. So simply do not fiddle with
the CFLAGS on a kernel build and the kernel build system will do the
right thing (TM).

[Peter: do the same thing for the standard kernel build]

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gst-plugins-base: don't search host headers if freetype isn't available

freetype is only used by examples, but if it is not found
and the host has a freetype-config script, then the host
include dirs are added to the search path causing trouble.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gst-plugins-good: disable aalib

Explictly disable the build of the aasink plug-in. Without this fix
the plug-in would be built if the aalib headers are found on the host.

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

haserl: move 0.9.25 fix to subdir, so it isn't picked up by 0.8.0 build

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Bump SaWMan to 1.4.1

Bump SaWMan to 1.4.1

The current version of sawman (1.2.0-rc1) won't compile with directFB >= 1.4

Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libpng: bump version

Fixes an unitialized-memory-read bug.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libglib2: update to upstream release 2.20.4

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Merge branch 'master' of ssh://uclibc.org/var/lib/git/buildroot

tremor: provide libvorbis* alias for targets

several packages depend on libvorbis, so also provide libvorbis
targets when tremor is selected.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Fix memstat's install

Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>

mtd: get rid of ancient deprecated versions

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

haserl: 0.9.25 array vars fix

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

wpa_supplicant: add optional dbus support

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: 1.14.2 test fix

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 2.6.27 / 2.6.30 stable versions

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sdl_gfx: new package

Closes #369.

[Peter: Minor tweaks]

Signed-off-by: Evan Zelkowitz <evan.zelkowitz@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

.gitignore: add backup files

Add *.orig and *~ backup files to gitignore.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Merge branch 'ext-toolchain-target-path' of git://git.busybox.net/~tpetazzoni/git/buildroot

xutil_makedepend: install to target, not staging

makedepend is a program, not a library - So makedepend for the target
should get installed to target_dir and not to staging_dir.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mesa3d: compile makedepend (and in turn xproto) for the host

The mesa3d build needs makedepend on the host, so compile one in $HOST_DIR.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

expat: fix typo

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: add #271

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Merge branch 'external-toolchain' of git://git.busybox.net/~tpetazzoni/git/buildroot

CHANGES: add #467

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Merge branch 'directfb-bump' of git://git.busybox.net/~tpetazzoni/git/buildroot

external toolchain: add $(HOST_DIR)/bin to TARGET_PATH

Since the move of many host binaries to $(HOST_DIR), the TARGET_PATH
for internal toolchain had been changed to include $(HOST_DIR)/bin and
$(HOST_DIR)/usr/bin, but this change was not reflected to the
TARGET_PATH used in external toolchain configuration. This patches
fixes this.

We also remove $(STAGING_DIR)/bin and $(STAGING_DIR)/usr/bin from the
TARGET_PATH in external toolchain configuration, since the STAGING_DIR
is not supposed to contain host binaries.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg: simplify dependencies on X.org

Many packages used to depend on BR2_PACKAGE_XORG||BR2_PACKAGE_XORG7,
but this is useless since BR2_PACKAGE_XORG is a non-existing
configuration option. So, these depencies gets simplified to
BR2_PACKAGE_XORG7 only.

Some others were depending on BR2_PACKAGE_TINYX (which doesn't) exist
or BR2_PACKAGE_XSERVER_xorg || BR2_PACKAGE_XSERVER_tiny ||
BR2_PACKAGE_XSERVER_x11r7. Replace all that mess by a simple
dependency on BR2_PACKAGE_XORG7.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg: remove useless configuration comment

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg: reindent configuration option details

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorg: reorganize the selection of the X.org server type

The selection of the X.org server type was really strange. The user
had to select between none, tinyx and modular. Now, the menuconfig
interface display a single item for X.org, that can be
selected/unselected. This entry contains a submenu, that allows to
select the type of the X.org server (tinyX or modular) and that allows
(as before) to enable/disable X.org libraries, drivers, etc.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

directfb: bump version

Bump the version of Direct FB to 1.4.1. Fixes bug #467. Thanks to
Lionel Landwerlin <lionel.landwerlin@openwide.fr> for the
notification.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

external toolchain: check cross-compiler existence

As a minimal test to the external toolchain, check that $(TARGET_CC)
is actually an existing executable file. That way, if the user
misconfigures the toolchain path and/or prefix, a meaningful error
message will be shown.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

external toolchain: respect $(Q)

Use $(Q) in external toolchain support so that the user can get the
full output by passing V=1 to make, and still get a nice and clean
output by default.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

external toolchain: copy the C++ standard library if needed

Obey the BR2_INSTALL_LIBSTDCPP configuration option to copy the C++
standard library to the target. Suggested by Lionel Landwerlin
<lionel.landwerlin@openwide.fr>.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

external toolchain: do not copy useless symbolic links

Do not copy .so symbolic links to target when not needed. Only copy
.so.X symbolic links and the library itself.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

external toolchain: more documentation about the principles

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

external toolchain: use LANG=C when calling gcc -v

Lionel Landwerlin <lionel.landwerlin@openwide.fr> reported that using
the external toolchain support when LANG=fr_FR.UTF-8 doesn't work,
since the messages printed by gcc -v are translated in another
language, defeating the grep ^Configured test.

Therefore, as per Lionel suggestion, we force LANG=C when calling
$(TARGET_CC) -v.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

external-toolchain: better documentation, cleanup, sysroot check

 * Introduce documentation for each function of ext-tool.mk, and
   document all parameters of the functions.

 * Pass SYSROOT_DIR as argument to all functions that require it,
   instead of computing it manually everywhere

 * Use $(shell) instead of backquotes

 * Check that the SYSROOT_DIR variable is not empty, which means that
   the external toolchain doesn't support --sysroot. In that case,
   bail out with a nice error message.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libvorbis: fix tremor install into staging_dir

Closes #387.

When tremor is selected, the normal libvorbis shouldn't get built and
tremer should get installed into staging_dir as well.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

external toolchain: fix libraries copy and add ARM ABI check

Instead of hardcoding the C library versions, just copy the version
available in $SYSROOT_DIR/lib.

Add a check on the ARM ABI configured in Buildroot with regard to the
ABI of the external toolchain provided.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qtopia4: add option for STL support

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ruby: needs WCHAR support in toolchain

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>