GCC Administrator [Mon, 4 Sep 2017 00:16:24 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r251633
Uros Bizjak [Sun, 3 Sep 2017 23:17:26 +0000 (01:17 +0200)]
adx-check.h (main): Use __get_cpuid_count.
* gcc.target/i386/adx-check.h (main): Use __get_cpuid_count.
* gcc.target/i386/bmi-check.h (main): Ditto.
* gcc.target/i386/bmi2-check.h (main): Ditto.
* gcc.target/i386/rtm-check.h (main): Ditto.
* gcc.target/i386/sha-check.h (main): Ditto.
* gcc.target/i386/avx2-check.h (check_osxsave): New function.
(main): Use __get_cpuid_count. Use check_osxsave.
* gcc.target/i386/avx512-check.h (check_osxsave): New function.
(main): Use __get_cpuid_count. Use check_osxsave. Reorder conditions.
* gcc.target/i386/mpx/mpx-check.h (check_osxsave): New function.
(main): Use check_osxsave.
From-SVN: r251629
Uros Bizjak [Sun, 3 Sep 2017 21:13:35 +0000 (23:13 +0200)]
mpx-check.h (main): Use __get_cpuid_count and return NORUNRES on failure.
* gcc.target/i386/mpx/mpx-check.h (main): Use __get_cpuid_count
and return NORUNRES on failure.
* gcc.target/i386/mpx/va-arg-pack-1-lbv.c (foo1): Use
__builtin_va_arg_pack instead of __va_arg_pack.
* gcc.target/i386/mpx/va-arg-pack-1-nov.c (foo1): Ditto.
* gcc.target/i386/mpx/va-arg-pack-1-ubv.c (foo1): Ditto.
* gcc.target/i386/mpx/va-arg-pack-2-lbv.c (foo1): Ditto.
* gcc.target/i386/mpx/va-arg-pack-2-nov.c (foo1): Ditto.
* gcc.target/i386/mpx/va-arg-pack-2-ubv.c (foo1): Ditto.
From-SVN: r251627
Gerald Pfeifer [Sun, 3 Sep 2017 20:02:11 +0000 (20:02 +0000)]
generic.texi (OpenACC): Adjust URL.
* doc/generic.texi (OpenACC): Adjust URL.
* doc/invoke.texi (C Dialect Options): Ditto.
From-SVN: r251626
Uros Bizjak [Sun, 3 Sep 2017 18:48:59 +0000 (20:48 +0200)]
i386.md (*bt<mode>): Use nonimmediate_operand predicate for operand 1.
* config/i386/i386.md (*bt<mode>): Use nonimmediate_operand
predicate for operand 1. Add (m,<S>) constraint.
(*jcc_bt<mode>): Use nonimmediate_operand predicate for operand 1.
Prevent memory operand 1 with register operand 2.
From-SVN: r251625
GCC Administrator [Sun, 3 Sep 2017 00:16:22 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r251624
GCC Administrator [Sat, 2 Sep 2017 00:16:18 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r251617
Michael Meissner [Fri, 1 Sep 2017 22:10:57 +0000 (22:10 +0000)]
re PR libquadmath/81848 (Add PowerPC support to libquadmath)
2017-09-01 Michael Meissner <meissner@linux.vnet.ibm.com>
PR libquadmath/81848
* configure.ac (powerpc*-linux*): Use attribute mode KC to create
complex __float128 on PowerPC instead of attribute mode TC.
* quadmath.h (__complex128): Likewise.
* configure: Regenerate.
* math/cbrtq.c (CBRT2): Use __float128 not long double.
(CBRT4): Likewise.
(CBRT2I): Likewise.
(CBRT4I): Likewise.
* math/j0q.c (U0): Likewise.
* math/sqrtq.c (sqrtq): Don't depend on implicit conversion
between __float128, instead explicitly convert the __float128
value to long double because the PowerPC does not allow __float128
and long double in the same expression.
From-SVN: r251613
Nathan Sidwell [Fri, 1 Sep 2017 19:00:42 +0000 (19:00 +0000)]
cp-tree.h (resort_type_method_vec): Move declaration to ...
* cp-tree.h (resort_type_method_vec): Move declaration to ...
* name-lookup.h (resort_type_method_vec): ... here.
(set_class_bindings): Lose 2nd arg.
* class.c (finish_struct_1, finish_struct): Adjust
set_class_bindings call. Don't call finish_struct_methods.
(resort_data, method_name_cmp, resort_method_name_cmp,
resort_type_method_vec, finish_struct_methods): Move to ...
* name-lookup.c (resort_data, method_name_cmp,
resort_method_name_cmp, resort_type_method_vec): ... here.
(set_class_bindings): Lose fields arg. Swallow finish_struct_methods.
From-SVN: r251609
Nathan Sidwell [Fri, 1 Sep 2017 18:10:42 +0000 (18:10 +0000)]
class.c (finish_struct): Call set_class_bindings for the template case too.
* class.c (finish_struct): Call set_class_bindings for the
template case too.
From-SVN: r251608
Segher Boessenkool [Fri, 1 Sep 2017 16:54:53 +0000 (18:54 +0200)]
combine: Fix for PR82024
With the testcase in the PR, with all the command line options mentioned
there, a (comparison) instruction becomes dead in fwprop1 but is not
deleted until all the way in rtl_dce.
Before combine this insn look like:
20: flags:CC=cmp(r106:DI,0xffffffffffffffff)
REG_DEAD r106:DI
REG_UNUSED flags:CC
REG_EQUAL cmp(0,0xffffffffffffffff)
(note the only output is unused).
Combining some earlier insns gives
13: r106:DI=0
14: r105:DI=r101:DI+r103:DI
14+13+20 then gives
(parallel [
(set (reg:CC 17 flags)
(compare:CC (const_int 0 [0])
(const_int -1 [0xffffffffffffffff])))
(set (reg:DI 105)
(plus:DI (reg/v:DI 101 [ e ])
(reg:DI 103)))
])
which doesn't match; but the set of flags is dead, so combine makes the
set of r105 the whole new instruction, which it then places at i3. But
that is wrong, because r105 is used after i2 but before i3! We forget
to check for that in this case.
This patch fixes it.
PR rtl-optimization/82024
* combine.c (try_combine): If the combination result is a PARALLEL,
and we only need to retain the SET in there that would be placed
at I2, check that we can place that at I3 instead, before doing so.
From-SVN: r251607
Jakub Jelinek [Fri, 1 Sep 2017 16:49:26 +0000 (18:49 +0200)]
re PR target/81766 (ICE in maybe_add_or_update_dep_1, at sched-deps.c:924 caused by r250815)
PR target/81766
* config/i386/i386.c (ix86_init_large_pic_reg): Return label instead of void.
(ix86_init_pic_reg): Remember label from ix86_init_large_pic_reg, if non-NULL
and preceded by NOTE_INSN_BASIC_BLOCK, swap the note and label.
* gcc.target/i386/pr81766.c: New test.
From-SVN: r251606
Boris Kolpackov [Fri, 1 Sep 2017 16:45:33 +0000 (16:45 +0000)]
c-opts.c (c_common_finish): Write dependency information even if there are errors.
* c-opts.c (c_common_finish): Write dependency information even if
there are errors.
From-SVN: r251605
Nathan Sidwell [Fri, 1 Sep 2017 16:34:29 +0000 (16:34 +0000)]
class.c (finish_struct_methods): Done clear DECL_IN_AGGR_P here.
* class.c (finish_struct_methods): Done clear DECL_IN_AGGR_P here.
Don't call maybe_warn_about_overly_private_class here.
(warn_hidden): Cleanup declarations and comments.
(type_has_user_provided_constructor): No need to check
CLASSTYPE_METHOD_VEC.
(type_has_user_provided_or_explicit_constructor): Likewise.
(classtype_has_move_assign_or_move_ctor_p): Likewise.
(check_bases_and_members): Don't call finish_struct_methods here.
(finish_struct_1): Call finish_struct_methods and
set_class_bindings immediately after layout. Clear DECL_IN_AGGR_P
here.
(finish_struct): For templates process USING_DECLS and clear
DECL_IN_AGGR_P before calling finish_struct_methods. Call
maybe_warn_about_overly_private_class here.
From-SVN: r251604
Joseph Myers [Fri, 1 Sep 2017 16:29:49 +0000 (17:29 +0100)]
Fix excess precision handling of compound assignments (PR c/82071).
PR c/82071 reports how compound assignment operators such as += handle
excess precision inconsistently with the same operation done with a
plain assignment and binary operator.
There were (at least) two problems with how compound assignments
handled excess precision. The EXCESS_PRECISION_EXPR for an argument
with excess precision was removed too early, resulting in
build_binary_op being called with an rhs operand whose type reflected
the evaluation format, so not having sufficient information to achieve
the intended semantics in all cases, and then the code called
c_fully_fold on the results of build_binary_op without allowing for
the possibility of an EXCESS_PRECISION_EXPR as the result, so leading
to double rounding of the result (first to its semantic type, then to
the type of the LHS of the assignment) instead of the intended single
rounding.
This patch fixes those problems by keeping EXCESS_PRECISION_EXPRs
further through build_modify_expr (and build_atomic_assign which it
calls) and only removing them locally where appropriate.
Note that while this patch should achieve *consistency*, that's
consistency with the understanding of C99 semantics that I originally
intended to implement. For the particular case in the testcase, C11
semantics (from N1531) differ from that understanding of C99
semantics, in that an implicit conversion of an integer to floating
point can have excess precision. I intend to implement those C11
semantics separately (conditional on flag_isoc11) (which will also
mean that building conditional expressions can produce a result with
excess precision even when the arguments lack excess precision, where
previously it could not), and not to close the bug until that is also
done.
Tested for x86_64-pc-linux-gnu.
PR c/82071
gcc/c:
* c-typeck.c (build_atomic_assign): Handle argument with excess
precision. Ensure any EXCESS_PRECISION_EXPR is present in
argument passed to build_binary_op and convert_for_assignment but
not for call to c_fully_fold.
(build_modify_expr): Do not remove EXCESS_PRECISION_EXPR early.
Ensure build_binary_op is called with argument with original
semantic type. Avoid calling c_fully_fold with an
EXCESS_PRECISION_EXPR from build_binary_op.
gcc/testsuite:
* gcc.target/i386/excess-precision-7.c: New test.
From-SVN: r251603
Joerg Sonnenberger [Fri, 1 Sep 2017 16:26:00 +0000 (10:26 -0600)]
varasm.c (bss_initializer_p): Do not put constants into .bss
* varasm.c (bss_initializer_p): Do not put constants into .bss
(categorize_decl_for_section): Handle bss_initializer_p returning
false when DECL_INITIAL is NULL.
* gcc.target/i386/const-in-bss.c: New test.
From-SVN: r251602
Andreas Krebbel [Fri, 1 Sep 2017 15:58:05 +0000 (15:58 +0000)]
S/390: PR82012: Implement CAN_INLINE_P target hook.
TARGET_CAN_INLINE_P must be implemented when supporting target
attributes.
gcc/ChangeLog:
2017-09-01 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
PR target/82012
* config/s390/s390.c (s390_can_inline_p): New function.
gcc/testsuite/ChangeLog:
2017-09-01 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
PR target/82012
* gcc.target/s390/target-attribute/pr82012.c: New test.
From-SVN: r251601
Jeff Law [Fri, 1 Sep 2017 15:32:15 +0000 (09:32 -0600)]
re PR tree-optimization/82052 (ICE with "-O3 -m32" on x86_64-linux-gnu (internal compiler error: in pop_to_marker, at tree-ssa-scopedtables.c:71))
PR tree-optimization/82052
* tree-ssa-scopedtables.c (avail_exprs_stack::lookup_avail_expr):
Always initialize the returned slot after a hash table miss
when INSERT is true.
PR tree-optimization/82052
* gcc.c-torture/compile/pr82052.c: New test.
From-SVN: r251600
Alexander Monakov [Fri, 1 Sep 2017 14:08:42 +0000 (17:08 +0300)]
retire mem_signal_fence pattern
* config/s390/s390.md (mem_signal_fence): Remove.
* doc/md.texi (mem_signal_fence): Remove.
* optabs.c (expand_mem_signal_fence): Remove uses of mem_signal_fence.
Update comments.
* target-insns.def (mem_signal_fence): Remove.
From-SVN: r251597
Jakub Jelinek [Fri, 1 Sep 2017 13:47:04 +0000 (15:47 +0200)]
re PR sanitizer/81902 (new -fsanitize=pointer-overflow option undocumented)
PR sanitizer/81902
* doc/invoke.texi: Document -fsanitize=pointer-overflow.
From-SVN: r251596
Jakub Jelinek [Fri, 1 Sep 2017 13:46:14 +0000 (15:46 +0200)]
re PR sanitizer/81923 ([ASAN] gcc emites wrong odr asan instrumentation for glibc)
PR sanitizer/81923
* asan.c (create_odr_indicator): Strip name encoding from assembler
name before appending it after __odr_asan_.
* gcc.dg/asan/pr81923.c: New test.
From-SVN: r251595
Olivier Hainque [Fri, 1 Sep 2017 13:43:01 +0000 (13:43 +0000)]
config.host (*-*-vxworks7): Widen scope to vxworks7*.
2017-09-01 Olivier Hainque <hainque@adacore.com>
libgcc/
* config.host (*-*-vxworks7): Widen scope to vxworks7*.
From-SVN: r251594
Nathan Sidwell [Fri, 1 Sep 2017 13:03:10 +0000 (13:03 +0000)]
Revert 2017-08-28 Nathan Sidwell <nathan@acm.org> Restore sorted_fields vector.
Revert 2017-08-28 Nathan Sidwell <nathan@acm.org>
Restore sorted_fields vector.
* cp-tree.h (lang_type): Restore sorted_fields vector.
(CLASSTYPE_SORTED_FIELDS): Restore.
(CLASSTYPE_BINDINGS): Delete.
* name-lookup.c (lookup_field_1): Restore binary search.
(sorted_fields_type_new, count_fields,
add_fields_to_record_type, add_enum_fields_to_record_type): Restore
(set_class_bindings): Revert.
(insert_late_enum_def_binding): Restore field_vec insertion.
From-SVN: r251592
Martin Liska [Fri, 1 Sep 2017 13:02:37 +0000 (15:02 +0200)]
Fix profile update in tree-ssa-isolate-paths.c (PR tree-optimization/82059).
2017-09-01 Martin Liska <mliska@suse.cz>
PR tree-optimization/82059
* gimple-ssa-isolate-paths.c (isolate_path): Add profile and
frequency only when an edge is redirected.
2017-09-01 Martin Liska <mliska@suse.cz>
PR tree-optimization/82059
* gcc.dg/tree-ssa/pr82059.c: New test.
From-SVN: r251591
Claudiu Zissulescu [Fri, 1 Sep 2017 11:43:51 +0000 (13:43 +0200)]
[ARC] Reimplement ZOL support.
2017-05-22 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc-c.c (__ARC_LPC_WIDTH__): Add builtin define.
* config/arc/arc.c (ARC_MAX_LOOP_LENGTH): Define.
(arc_conditional_register_usage): Remove ARC600 lp_count
exception.
(arc_file_start): Emit Tag_ARC_CPU_variation.
(arc_can_use_doloop_p): New conditions to use ZOLs.
(hwloop_fail): New function.
(hwloop_optimize): Likewise.
(hwloop_pattern_reg): Likewise.
(arc_doloop_hooks): New struct, to be used with reorg_loops.
(arc_reorg_loops): New function, calls reorg_loops.
(arc_reorg): Call arc_reorg_loops. Remove old ZOL handling.
(arc600_corereg_hazard): Remove ZOL checking, case handled by
hwloop_optimize.
(arc_loop_hazard): Remove function, functionality moved into
hwloop_optimize.
(arc_hazard): Remove arc_loop_hazard call.
(arc_adjust_insn_length): Remove ZOL handling, functionality moved
into hwloop_optimize.
(arc_label_align): Remove ZOL handling.
* config/arc/arc.h (LOOP_ALIGN): Changed to 0.
* config/arc/arc.md (doloop_begin): Remove pattern.
(doloop_begin_i): Likewise.
(doloop_end_i): Likewise.
(doloop_fallback): Likewise.
(doloop_fallback_m): Likewise.
(doloop_end): Reimplement expand.
(arc_lp): New pattern for LP instruction.
(loop_end): New pattern.
(loop_fail): Likewise.
(decrement_and_branch_until_zero): Likewise.
* config/arc/arc.opt (mlpc-width): New option.
* doc/invoke.texi (mlpc-width): Document option.
testsuite/
2017-05-22 Claudiu Zissulescu <claziss@synopsys.com>
* gcc.target/arc/loop-1.c: Deleted.
From-SVN: r251589
Claudiu Zissulescu [Fri, 1 Sep 2017 11:43:40 +0000 (13:43 +0200)]
[ARC] Fix errors in arc_ifcvt.
The arc_ifcvt procedure is removing a label even when it is used by
another jump. This patch fixes dg.exp/pr31507-1.c.
gcc/
2017-07-10 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_ifcvt): Remove use of merge_blocks call.
(arc_ccfsm_advance): Fix checking for delay slots.
(arc_reorg): Add rtl dump after each call to arc_ifcvt
From-SVN: r251588
Claudiu Zissulescu [Fri, 1 Sep 2017 11:43:29 +0000 (13:43 +0200)]
[ARC] Update various patterns
gcc/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.md (movqi_insn): Add stores to save constant long
immediates.
(movhi_insn): Update store instruction constraint which are saving
6-bit short immediates.
(movsi_insn): Consider also short scaled load operations.
(zero_extendhisi2_i): Use Usd constraint instead of T.
(extendhisi2_i): Add q constraint.
(arc_clzsi2): Add type and length attributes.
(arc_ctzsi2): Likewise.
* config/arc/constraints.md (Usc): Update constraint, the
assembler can parse two relocations for a single instruction.
gcc/testsuite/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* gcc.target/arc/arc.exp: Test also cpp files.
* gcc.target/arc/tdelay_slots.cpp: New test.
From-SVN: r251587
Claudiu Zissulescu [Fri, 1 Sep 2017 11:43:17 +0000 (13:43 +0200)]
[ARC] Use TARGET_USE_ANCHORS_FOR_SYMBOL_P.
We don't want to use anchors for small data: the GP register acts as an anchor in that
case. We also don't want to use them for PC-relative accesses,
where the PC acts as an anchor. TLS symbols require special accesses as well, don't use
anchors for such symbols.
gcc/
2017-04-28 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_use_anchors_for_symbol_p): New function.
(TARGET_USE_ANCHORS_FOR_SYMBOL_P): Define.
gcc/testsuite
2017-04-28 Claudiu Zissulescu <claziss@synopsys.com>
* gcc.target/arc/pr9001184797.c: New test.
From-SVN: r251586
Jakub Jelinek [Fri, 1 Sep 2017 11:25:39 +0000 (13:25 +0200)]
re PR c/81887 (pragma omp ordered simd ignored under -fopenmp-simd)
PR c/81887
c-family/
* c-pragma.c (omp_pragmas): Move "ordered" entry from here to ...
(omp_pragmas_simd): ... here.
* c-omp.c (c_finish_omp_ordered): If clauses isn't simd clause alone,
create new clauses list containing just simd clause.
c/
* c-parser.c (c_parser_omp_ordered): Handle -fopenmp-simd.
cp/
* parser.c (cp_parser_omp_ordered): Handle -fopenmp-simd.
fortran/
* parse.c (decode_omp_directive): Use matchs instead of matcho for
end ordered and ordered directives, except for ordered depend. For
-fopenmp-simd and ordered depend, reject the stmt.
* trans-openmp.c (gfc_trans_omp_ordered): For -fopenmp-simd ignore
threads clause and if simd clause isn't present, just translate the
body.
testsuite/
* c-c++-common/gomp/pr81887.c: New test.
* gfortran.dg/gomp/pr81887.f90: New test.
From-SVN: r251585
Martin Liska [Fri, 1 Sep 2017 11:22:04 +0000 (13:22 +0200)]
Fix warning for simple-object-elf.c.
2017-09-01 Martin Liska <mliska@suse.cz>
* simple-object-elf.c (simple_object_elf_copy_lto_debug_sections):
Remove duplicite declaration.
From-SVN: r251584
Marek Polacek [Fri, 1 Sep 2017 09:22:57 +0000 (09:22 +0000)]
re PR c++/82040 (ICE with -Wbool-operation and ~)
PR c++/82040
* typeck.c (cp_build_unary_op): Avoid re-entering reporting routines.
* g++.dg/warn/Wbool-operation-1.C: New test.
From-SVN: r251581
GCC Administrator [Fri, 1 Sep 2017 00:16:16 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r251580
Ian Lance Taylor [Thu, 31 Aug 2017 20:07:55 +0000 (20:07 +0000)]
mksysinfo: fix in6_addr in mld_hdr_t for Solaris
Patch by Rainer Orth.
Reviewed-on: https://go-review.googlesource.com/60732
From-SVN: r251574
Olivier Hainque [Thu, 31 Aug 2017 19:19:47 +0000 (19:19 +0000)]
config.gcc (powerpc-wrs-vxworks|vxworksae|vxworksmils): Now match as powerpc-wrs-vxworks*.
2017-08-31 Olivier Hainque <hainque@adacore.com>
gcc/
* config.gcc (powerpc-wrs-vxworks|vxworksae|vxworksmils): Now
match as powerpc-wrs-vxworks*.
libgcc/
* config.host: Likewise.
From-SVN: r251573
Jonathan Wakely [Thu, 31 Aug 2017 16:45:37 +0000 (17:45 +0100)]
PR c++/82039 suppress -Wzero-as-null-pointer-constant warning
PR c++/82039
* include/ext/new_allocator.h (__gnu_cxx::new_allocator::allocate):
Adjust null pointer constant to avoid warning.
From-SVN: r251570
James Greenhalgh [Thu, 31 Aug 2017 16:03:09 +0000 (16:03 +0000)]
[AArch64 obvious] Fix register constraints for aarch64_ml[as]_elt_merge<mode>
The MLA by-element instructions have the same restriction as other by-element
instructions whereby the forms operating on vectors of 16-bit integer data
may only use registers v0-v15. We have an iterator for that, applied to the
other patterns generating this instruction, so use that.
gcc/
* config/aarch64/aarch64-simd.md (aarch64_mla_elt_merge<mode>): Fix
register constraint for by-element operand.
(aarch64_mls_elt_merge<mode>): Likewise.
From-SVN: r251568
Jason Merrill [Thu, 31 Aug 2017 15:39:04 +0000 (11:39 -0400)]
PR c++/82029 - __PRETTY_FUNCTION__ in lambda in template
* pt.c (enclosing_instantiation_of, lambda_fn_in_template_p)
(regenerated_lambda_fn_p): New.
(tsubst_decl) [VAR_DECL]: Use enclosing_instantiation_of.
(tsubst_copy) [VAR_DECL]: Likewise.
From-SVN: r251567
Claudiu Zissulescu [Thu, 31 Aug 2017 14:35:47 +0000 (16:35 +0200)]
[ARC] Update can_follow_jump hook helper.
Short branches cannot be used to jump between hot/cold
sections. Update the hook.
gcc/
2017-04-26 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_can_follow_jump): Check for short
branches.
From-SVN: r251566
Claudiu Zissulescu [Thu, 31 Aug 2017 14:25:55 +0000 (16:25 +0200)]
[ARC] Use -G option to control sdata behavior
gcc/
2017-04-24 Claudiu Zissulescu <claziss@synopsys.com>
* config.gcc: Use g.opt for arc.
* config/arc/arc.c (LEGITIMATE_SCALED_ADDRESS_P): Deleted,
functionality moved to ...
(legitimate_scaled_address_p): New function, ...here.
(LEGITIMATE_SMALL_DATA_OFFSET_P): New define.
(LEGITIMATE_SMALL_DATA_ADDRESS_P): Use the above define.
(legitimate_offset_address_p): Delete TARGET_NO_SDATA_SET
condition.
(arc_override_options): Handle G option.
(arc_output_pic_addr_const): Correct function definition.
(arc_legitimate_address_p): Use legitimate_scaled_address_p.
(arc_decl_anon_ns_mem_p): Delete.
(arc_in_small_data_p): Overhaul this function to take into
consideration the value given via G option.
(arc_rewrite_small_data_1): Renamed and corrected old
arc_rewrite_small_data function.
(arc_rewrite_small_data): New function.
(small_data_pattern): Don't use pic_offset_table_rtx.
* config/arc/arc.h (CC1_SPEC): Recognize G option.
* config/arc/simdext.md (movmisalignv2hi): Use
prepare_move_operands function.
(mov*): Likewise.
(movmisalign*): Likewise.
gcc/testsuite/
2017-04-24 Claudiu Zissulescu <claziss@synopsys.com>
* gcc.target/arc/sdata-5.c: New test.
* gcc.target/arc/arc700-stld-hazard.c: Update test options.
Fix test
From-SVN: r251564
Claudiu Zissulescu [Thu, 31 Aug 2017 13:52:31 +0000 (15:52 +0200)]
[ARC] Improves and fixes for small data support.
Add alignment check for short load/store instructions used for sdata,
as they request 32-bit aligned short immediate. Use sdata symbol
alignment information and emit scalled loads/stores whenever is
possible. The scalled address will extend the access range for sdata
symbols. Allow 64-bit datum into small data section, if double
load/store instructions are present.
gcc/
2017-04-12 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc-protos.h (compact_sda_memory_operand): Update
prototype.
* config/arc/arc.c (arc_print_operand): Output scalled address for
sdata whenever is possible.
(arc_in_small_data_p): Allow sdata for 64bit datum when double
load/stores are available.
(compact_sda_memory_operand): Check for the alignment required by
code density instructions.
* config/arc/arc.md (movsi_insn): Use newly introduced Us0
constraint.
* config/arc/constraints.md (Usd): Update constraint.
(Us0): New constraint.
(Usc): Update constraint.
gcc/testsuite/
2017-04-12 Claudiu Zissulescu <claziss@synopsys.com>
* gcc.target/arc/sdata-3.c: New file.
From-SVN: r251562
Richard Biener [Thu, 31 Aug 2017 11:21:40 +0000 (11:21 +0000)]
re PR lto/81968 (early lto debug objects make Solaris ld SEGV)
2017-08-31 Richard Biener <rguenther@suse.de>
PR lto/81968
* simple-object-elf.c (simple_object_elf_copy_lto_debug_section):
Keep names of removed global symbols.
From-SVN: r251560
Richard Biener [Thu, 31 Aug 2017 11:20:54 +0000 (11:20 +0000)]
re PR c++/82054 (ICE in add_dwarf_attr with -fopenmp and -g)
2017-08-31 Richard Biener <rguenther@suse.de>
PR middle-end/82054
* dwarf2out.c (dwarf2out_early_global_decl): Process each
function only once.
* g++.dg/gomp/pr82054.C: New testcase.
From-SVN: r251559
Tamar Christina [Thu, 31 Aug 2017 10:54:38 +0000 (10:54 +0000)]
aarch64-builtins.c (aarch64_init_simd_builtins): Resize type_signature.
2017-08-31 Tamar Christina <tamar.christina@arm.com>
* config/aarch64/aarch64-builtins.c (aarch64_init_simd_builtins):
Resize type_signature.
From-SVN: r251558
Richard Sandiford [Thu, 31 Aug 2017 10:11:41 +0000 (10:11 +0000)]
[AArch64] Tighten address register subreg checks
Previously we allowed subregs of non-GPR modes to be base and index
registers in non-strict mode. In practice such subregs will always
require a reload, so we get better code by disallowing them.
2017-08-31 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* config/aarch64/aarch64.c (aarch64_base_register_rtx_p): Only allow
subregs whose inner modes can be stored in GPRs.
(aarch64_classify_index): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251557
Richard Sandiford [Thu, 31 Aug 2017 09:52:38 +0000 (09:52 +0000)]
[AArch64] Rename cmp_result iterator
The comparison results provided by the V_cmp_result/v_cmp_result
attribute were simply the corresponding integer vector. We'd also
like to have easy access to the integer vector for SVE, but using
"cmp_result" would be confusing because SVE comparisons return
predicates instead of vectors. This patch therefore renames the
attributes to the more general V_INT_EQUIV/v_int_equiv instead.
As to the capitalisation: there are already many iterators that use
all lowercase vs. all uppercase names to distinguish all lowercase
vs. all uppercase expansions (e.g. fcvt_target and FCVT_TARGET).
It's also the convention used for the built-in mode/MODE/code/CODE/etc.
attributes. IMO those names are easier to read at a glance, rather than
relying on a single letter's difference.
2017-08-22 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* config/aarch64/iterators.md (V_cmp_result): Rename to...
(V_INT_EQUIV): ...this.
(v_cmp_result): Rename to...
(v_int_equiv): ...this.
* config/aarch64/aarch64.md (xorsign<mode>3): Update accordingly.
* config/aarch64/aarch64-simd.md (xorsign<mode>3): Likewise.
(copysign<mode>3): Likewise.
(aarch64_simd_bsl<mode>_internal): Likewise.
(aarch64_simd_bsl<mode>): Likewise.
(vec_cmp<mode><mode>): Likewise.
(vcond<mode><mode>): Likewise.
(vcond<v_cmp_mixed><mode>): Likewise.
(vcondu<mode><v_cmp_mixed>): Likewise.
(aarch64_cm<optab><mode>): Likewise.
(aarch64_cmtst<mode>): Likewise.
(aarch64_fac<optab><mode>): Likewise.
(vec_perm_const<mode>): Likewise.
(vcond_mask_<mode><v_cmp_result>): Rename to...
(vcond_mask_<mode><v_int_equiv>): ...this.
(vec_cmp<mode><v_cmp_result>): Rename to...
(vec_cmp<mode><v_int_equiv>): ...this.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251556
Richard Sandiford [Thu, 31 Aug 2017 09:51:40 +0000 (09:51 +0000)]
[AArch64] Remove use of wider vector modes
The AArch64 port defined x2, x3 and x4 vector modes that were only used
in the rtl for the AdvSIMD LD{2,3,4} patterns. It seems unlikely that
this rtl would have led to any valid simplifications, since the values
involved were unspecs that had a different number of operands from the
non-dreg versions. (The dreg UNSPEC_LD2 had a single operand, while
the qreg one had two operands.)
As it happened, the patterns led to invalid simplifications on big-
endian targets due to a mix-up in the operand order, see Tamar's fix
in r240271.
This patch therefore replaces the rtl patterns with dedicated unspecs.
This allows the x2, x3 and x4 modes to be removed, avoiding a clash
with 256-bit and 512-bit SVE.
2017-08-22 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* config/aarch64/aarch64-modes.def: Remove 32-, 48- and 64-byte
vector modes.
* config/aarch64/iterators.md (VRL2, VRL3, VRL4): Delete.
* config/aarch64/aarch64.md (UNSPEC_LD2_DREG, UNSPEC_LD3_DREG)
(UNSPEC_LD4_DREG): New unspecs.
* config/aarch64/aarch64-simd.md (aarch64_ld2<mode>_dreg_le)
(aarch64_ld2<mode>_dreg_be): Replace with...
(aarch64_ld2<mode>_dreg): ...this pattern and use the new DREG
unspec.
(aarch64_ld3<mode>_dreg_le)
(aarch64_ld3<mode>_dreg_be): Replace with...
(aarch64_ld3<mode>_dreg): ...this pattern and use the new DREG
unspec.
(aarch64_ld4<mode>_dreg_le)
(aarch64_ld4<mode>_dreg_be): Replace with...
(aarch64_ld4<mode>_dreg): ...this pattern and use the new DREG
unspec.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251555
Renlin Li [Thu, 31 Aug 2017 09:18:22 +0000 (09:18 +0000)]
[TESTSUITE]Use memcpy instead of strcpy in testsuite/gcc.dg/memcmp-1.c
strcpy will keep reading and writing memory if the string is not terminated
with null character. In this case, it may visit memory beyond the boundary.
gcc/testsuite/
2017-08-31 Renlin Li <renlin.li@arm.com>
Aaron Sawdey <acsawdey@linux.vnet.ibm.com>
* gcc.dg/memcmp-1.c (test_strncmp): Use memcpy instead of strcpy.
Co-Authored-By: Aaron Sawdey <acsawdey@linux.vnet.ibm.com>
From-SVN: r251554
GCC Administrator [Thu, 31 Aug 2017 00:16:21 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r251553
Jason Merrill [Wed, 30 Aug 2017 22:19:33 +0000 (18:19 -0400)]
PR c++/82030 - ICE inheriting from multiple lambdas
PR c++/80767
* call.c (compare_ics): Handle null candidate.
From-SVN: r251549
Ville Voutilainen [Wed, 30 Aug 2017 20:50:25 +0000 (23:50 +0300)]
Make taking the address of an overloaded function a non-deduced context
cp/
* pt.c (unify_overload_resolution_failure): Remove.
(unify_one_argument): Adjust.
testsuite/
* g++.dg/overload/template6.C: New.
From-SVN: r251548
Bill Schmidt [Wed, 30 Aug 2017 20:04:07 +0000 (20:04 +0000)]
re PR tree-optimization/81987 (ICE in verify_ssa with -O3 -march=skylake-avx512)
[gcc]
2017-08-30 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
PR tree-optimization/81987
* gimple-ssa-strength-reduction.c (insert_initializers): Don't
insert an initializer in a location not dominated by the stride
definition.
[gcc/testsuite]
2017-08-30 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
PR tree-optimization/81987
* g++.dg/torture/pr81987.C: New file.
From-SVN: r251547
Eric Botcazou [Wed, 30 Aug 2017 19:10:38 +0000 (19:10 +0000)]
tree-eh.c (lower_try_finally_switch): Set the location of the finally on the entire header of the finally block in...
* tree-eh.c (lower_try_finally_switch): Set the location of the finally
on the entire header of the finally block in the fallthru case.
From-SVN: r251546
Eric Botcazou [Wed, 30 Aug 2017 19:09:16 +0000 (19:09 +0000)]
* varasm.c (decode_addr_const): Deal with INDIRECT_REF <INTEGER_CST>.
From-SVN: r251545
Pat Haugen [Wed, 30 Aug 2017 18:36:12 +0000 (18:36 +0000)]
rs6000.c (rs6000_emit_prologue_move_from_cr): Rename from rs6000_emit_move_from_cr and call renamed function.
* config/rs6000/rs6000.c (rs6000_emit_prologue_move_from_cr): Rename from
rs6000_emit_move_from_cr and call renamed function.
(rs6000_emit_prologue): Call renamed functions.
* config/rs6000/rs6000.md (prologue_movesi_from_cr): Rename from
movesi_from_cr, remove volatile CRs.
* gcc.target/powerpc/cr_shrink-wrap.c: New.
From-SVN: r251543
Ian Lance Taylor [Wed, 30 Aug 2017 18:27:39 +0000 (18:27 +0000)]
Fix e-mail address.
From-SVN: r251541
Ian Lance Taylor [Wed, 30 Aug 2017 18:27:17 +0000 (18:27 +0000)]
configure.ac: Substitute GOC_FOR_TARGET and GCC_FOR_TARGET.
* configure.ac: Substitute GOC_FOR_TARGET and GCC_FOR_TARGET.
* Makefile.am (MOSTLYCLEANFILES): Add check-gcc.
(check-gccgo): Create via a temporary file.
(check-gcc): New target.
(CHECK_ENV): Set CC.
(ECHO_ENV): Report CC.
(check-go-tool): Depend on check-gcc.
(check-runtime, check-cgo-test, check-carchive-test): Likewise.
* configure, Makefile.in: Rebuild.
From-SVN: r251540
Michael Meissner [Wed, 30 Aug 2017 18:09:51 +0000 (18:09 +0000)]
re PR target/82015 (PowerPC should check if 2nd argument to __builtin_unpackv1ti and similar functions is 0 or 1)
2017-08-30 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/82015
* gcc.target/powerpc/pr82015.c: Fix up error message.
From-SVN: r251539
Jon Beniston [Wed, 30 Aug 2017 16:16:37 +0000 (16:16 +0000)]
tree-vect-patterns.c (vect_pattern_recog_1): Use VECTOR_TYPE_P instead of VECTOR_MODE_P check.
* tree-vect-patterns.c (vect_pattern_recog_1): Use VECTOR_TYPE_P instead
of VECTOR_MODE_P check.
* tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): Allow single
element vector types.
Co-Authored-By: Richard Biener <rguenther@suse.de>
From-SVN: r251538
Richard Sandiford [Wed, 30 Aug 2017 15:28:18 +0000 (15:28 +0000)]
Drop df_ from df_read_modify_subreg_p
...it's really a general RTL predicate, rather than something that depends
on the DF state. Thanks to Segher for the suggestion.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* df.h (df_read_modify_subreg_p): Remove in favor of...
* rtl.h (read_modify_subreg_p): ...this new function. Take a
const_rtx instead of an rtx.
* cprop.c (local_cprop_find_used_regs): Update accordingly.
* df-problems.c (df_word_lr_mark_ref): Likewise.
* ira-lives.c (mark_pseudo_reg_live): Likewise.
(mark_pseudo_reg_dead): Likewise.
(mark_ref_dead): Likewise.
* reginfo.c (init_subregs_of_mode): Likewise.
* sched-deps.c (sched_analyze_1): Likewise.
* df-scan.c (df_def_record_1): Likewise.
(df_uses_record): Likewise.
(df_read_modify_subreg_p): Remove in favor of...
* rtlanal.c (read_modify_subreg_p): ...this new function. Take a
const_rtx instead of an rtx.
From-SVN: r251537
Richard Sandiford [Wed, 30 Aug 2017 15:25:38 +0000 (15:25 +0000)]
Add a partial_subreg_p predicate
This patch adds a partial_subreg_p predicate to go alongside
paradoxical_subreg_p.
Like the paradoxical_subreg_p patch, this one replaces some tests that
were based on GET_MODE_SIZE rather than GET_MODE_PRECISION. In each
case the change should be a no-op or an improvement.
The regcprop.c patch prevents some replacements of the 82-bit RFmode
with the 80-bit XFmode on ia64. I don't understand the target details
here particularly well, but from the way the modes are described in
ia64-modes.def, it isn't valid to assume that an XFmode can carry an
RFmode payload. A comparison of the testsuite assembly output for one
target per CPU showed no other differences.
Some of the places changed here are tracking the widest access mode
found for a register. The series tries to standardise on:
if (partial_subreg_p (widest_seen, new_mode))
widest_seen = new_mode;
rather than:
if (paradoxical_subreg_p (new_mode, widest_seen))
widest_seen = new_mode;
Either would have been OK.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* rtl.h (partial_subreg_p): New function.
* caller-save.c (save_call_clobbered_regs): Use it.
* calls.c (expand_call): Likewise.
* combine.c (combinable_i3pat): Likewise.
(simplify_set): Likewise.
(make_extraction): Likewise.
(make_compound_operation_int): Likewise.
(gen_lowpart_or_truncate): Likewise.
(force_to_mode): Likewise.
(make_field_assignment): Likewise.
(reg_truncated_to_mode): Likewise.
(record_truncated_value): Likewise.
(move_deaths): Likewise.
* cse.c (record_jump_cond): Likewise.
(cse_insn): Likewise.
* cselib.c (cselib_lookup_1): Likewise.
* expmed.c (extract_bit_field_using_extv): Likewise.
* function.c (assign_parm_setup_reg): Likewise.
* ifcvt.c (noce_convert_multiple_sets): Likewise.
* ira-build.c (create_insn_allocnos): Likewise.
* lra-coalesce.c (merge_pseudos): Likewise.
* lra-constraints.c (match_reload): Likewise.
(simplify_operand_subreg): Likewise.
(curr_insn_transform): Likewise.
* lra-lives.c (process_bb_lives): Likewise.
* lra.c (new_insn_reg): Likewise.
(lra_substitute_pseudo): Likewise.
* regcprop.c (mode_change_ok): Likewise.
(maybe_mode_change): Likewise.
(copyprop_hardreg_forward_1): Likewise.
* reload.c (push_reload): Likewise.
(find_reloads): Likewise.
(find_reloads_subreg_address): Likewise.
* reload1.c (alter_reg): Likewise.
(eliminate_regs_1): Likewise.
* simplify-rtx.c (simplify_unary_operation_1): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251536
David Edelsohn [Wed, 30 Aug 2017 14:50:17 +0000 (14:50 +0000)]
rs6000.c (rs6000_expand_binop_builtin): Revert back to if statements, including unpack.
* config/rs6000/rs6000.c (rs6000_expand_binop_builtin): Revert
back to if statements, including unpack.
From-SVN: r251535
Tony Reix [Wed, 30 Aug 2017 14:08:00 +0000 (14:08 +0000)]
simple-object-xcoff.c (simple_object_xcoff_find_sections): Improve .go_export csect handling.
* simple-object-xcoff.c (simple_object_xcoff_find_sections):
Improve .go_export csect handling. Don't make assumptions
on containing section or number of auxiliary entries.
From-SVN: r251533
Martin Liska [Wed, 30 Aug 2017 12:38:31 +0000 (14:38 +0200)]
Fix IPA ICF with ASM statements (PR inline-asm/82001).
2017-08-30 Martin Liska <mliska@suse.cz>
PR inline-asm/82001
* ipa-icf-gimple.c (func_checker::compare_tree_list_operand):
Rename to ...
(func_checker::compare_asm_inputs_outputs): ... this function.
(func_checker::compare_gimple_asm): Use the function to compare
also ASM constrains.
* ipa-icf-gimple.h: Rename the function.
2017-08-30 Martin Liska <mliska@suse.cz>
PR inline-asm/82001
* gcc.dg/ipa/pr82001.c: New test.
From-SVN: r251530
Richard Sandiford [Wed, 30 Aug 2017 11:53:37 +0000 (11:53 +0000)]
Add some changelog entries that went astray during the machmode commits
From-SVN: r251529
Richard Sandiford [Wed, 30 Aug 2017 11:21:04 +0000 (11:21 +0000)]
[77/77] Add a complex_mode class
This patch adds another machine_mode wrapper for modes that are
known to be COMPLEX_MODE_P. There aren't yet many places that make
use of it, but that might change in future.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* coretypes.h (complex_mode): New type.
* gdbhooks.py (build_pretty_printer): Handle it.
* machmode.h (complex_mode): New class.
(complex_mode::includes_p): New function.
(is_complex_int_mode): Likewise.
(is_complex_float_mode): Likewise.
* genmodes.c (get_mode_class): Handle complex mode classes.
* function.c (expand_function_end): Use is_complex_int_mode.
gcc/go/
* go-lang.c (go_langhook_type_for_mode): Use is_complex_float_mode.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251527
Richard Sandiford [Wed, 30 Aug 2017 11:20:55 +0000 (11:20 +0000)]
[76/77] Add a scalar_mode_pod class
This patch adds a scalar_mode_pod class and uses it to
replace the machine_mode in fixed_value.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* coretypes.h (scalar_mode_pod): New typedef.
* gdbhooks.py (build_pretty_printer): Handle it.
* machmode.h (gt_ggc_mx, gt_pch_nx): New functions.
* fixed-value.h (fixed_value::mode): Change type to scalar_mode_pod.
* fold-const.c (fold_convert_const_int_from_fixed): Use scalar_mode.
* tree-streamer-in.c (unpack_ts_fixed_cst_value_fields): Use
as_a <scalar_mode>.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251526
Richard Sandiford [Wed, 30 Aug 2017 11:20:47 +0000 (11:20 +0000)]
[74/77] Various small scalar_mode changes
This patch uses scalar_mode in a few miscellaneous places:
- Previous patches mean mode_to_vector can take a scalar_mode without
further changes.
- Implicit promotion is limited to scalar types (affects promote_mode
and sdbout_parms)
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* machmode.h (mode_for_vector): Take a scalar_mode instead
of a machine_mode.
* stor-layout.c (mode_for_vector): Likewise.
* explow.c (promote_mode): Use as_a <scalar_mode>.
* sdbout.c (sdbout_parms): Use is_a <scalar_mode>.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251525
Richard Sandiford [Wed, 30 Aug 2017 11:20:40 +0000 (11:20 +0000)]
[73/77] Pass scalar_mode to scalar_mode_supported_p
This patch makes the preferred_simd_mode target hook take a scalar_mode
rather than a machine_mode.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* target.def (preferred_simd_mode): Take a scalar_mode
instead of a machine_mode.
* targhooks.h (default_preferred_simd_mode): Likewise.
* targhooks.c (default_preferred_simd_mode): Likewise.
* config/arc/arc.c (arc_preferred_simd_mode): Likewise.
* config/arm/arm.c (arm_preferred_simd_mode): Likewise.
* config/c6x/c6x.c (c6x_preferred_simd_mode): Likewise.
* config/epiphany/epiphany.c (epiphany_preferred_simd_mode): Likewise.
* config/i386/i386.c (ix86_preferred_simd_mode): Likewise.
* config/mips/mips.c (mips_preferred_simd_mode): Likewise.
* config/nvptx/nvptx.c (nvptx_preferred_simd_mode): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_preferred_simd_mode):
Likewise.
* config/rs6000/rs6000.c (rs6000_preferred_simd_mode): Likewise.
* config/s390/s390.c (s390_preferred_simd_mode): Likewise.
* config/sparc/sparc.c (sparc_preferred_simd_mode): Likewise.
* config/aarch64/aarch64.c (aarch64_preferred_simd_mode): Likewise.
(aarch64_simd_scalar_immediate_valid_for_move): Update accordingly.
* doc/tm.texi: Regenerate.
* optabs-query.c (can_vec_mask_load_store_p): Return false for
non-scalar modes.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251524
Richard Sandiford [Wed, 30 Aug 2017 11:20:30 +0000 (11:20 +0000)]
[72/77] Pass scalar_mode to scalar_mode_supported_p
This patch makes the scalar_mode_supported_p target hook take a
scalar_mode rather than a machine_mode.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* target.def (scalar_mode_supported_p): Take a scalar_mode
instead of a machine_mode.
* targhooks.h (default_scalar_mode_supported_p): Likewise.
* targhooks.c (default_scalar_mode_supported_p): Likewise.
* config/aarch64/aarch64.c (aarch64_scalar_mode_supported_p): Likewise.
* config/alpha/alpha.c (alpha_scalar_mode_supported_p): Likewise.
* config/arm/arm.c (arm_scalar_mode_supported_p): Likewise.
* config/avr/avr.c (avr_scalar_mode_supported_p): Likewise.
* config/c6x/c6x.c (c6x_scalar_mode_supported_p): Likewise.
* config/i386/i386.c (ix86_scalar_mode_supported_p): Likewise.
* config/ia64/ia64.c (ia64_scalar_mode_supported_p): Likewise.
* config/mips/mips.c (mips_scalar_mode_supported_p): Likewise.
* config/msp430/msp430.c (msp430_scalar_mode_supported_p): Likewise.
* config/pa/pa.c (pa_scalar_mode_supported_p): Likewise.
* config/pdp11/pdp11.c (pdp11_scalar_mode_supported_p): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_scalar_mode_supported_p):
Likewise.
* config/rs6000/rs6000.c (rs6000_scalar_mode_supported_p): Likewise.
* config/s390/s390.c (s390_scalar_mode_supported_p): Likewise.
* config/spu/spu.c (spu_scalar_mode_supported_p): Likewise.
* config/tilegx/tilegx.c (tilegx_scalar_mode_supported_p): Likewise.
* config/tilepro/tilepro.c (tilepro_scalar_mode_supported_p):
Likewise.
* doc/tm.texi: Regenerate.
gcc/c-family/
* c-attribs.c (vector_mode_valid_p) Fold GET_MODE_INNER call
into scalar_mode_supported_p call.
(handle_mode_attribute): Update call to scalar_mode_supported_p.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251523
Richard Sandiford [Wed, 30 Aug 2017 11:20:19 +0000 (11:20 +0000)]
[71/77] Use opt_scalar_mode for mode iterators
This patch uses opt_scalar_mode when iterating over scalar modes.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* coretypes.h (opt_scalar_mode): New typedef.
* gdbhooks.py (build_pretty_printers): Handle it.
* machmode.h (mode_iterator::get_2xwider): Add overload for
opt_mode<T>.
* emit-rtl.c (init_emit_once): Use opt_scalar_mode when iterating
over scalar modes.
* expr.c (convert_mode_scalar): Likewise.
* omp-low.c (omp_clause_aligned_alignment): Likewise.
* optabs.c (expand_float): Likewise.
(expand_fix): Likewise.
* tree-vect-stmts.c (vectorizable_conversion): Likewise.
gcc/c-family/
* c-common.c (c_common_fixed_point_type_for_size): Use opt_scalar_mode
for the mode iterator.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251522
Richard Sandiford [Wed, 30 Aug 2017 11:20:11 +0000 (11:20 +0000)]
[70/77] Make expand_fix/float check for scalar modes
The expand_float code:
/* Unsigned integer, and no way to convert directly. Convert as signed,
then unconditionally adjust the result. */
and the expand_fix code:
/* For an unsigned conversion, there is one more way to do it.
If we have a signed conversion, we generate code that compares
the real value to the largest representable positive number. If if
is smaller, the conversion is done normally. Otherwise, subtract
one plus the highest signed number, convert, and add it back.
are restricted to scalars, since the expansion branches on a
comparison of the value. This patch makes that explicit.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* optabs.c (expand_float): Explicitly check for scalars before
using a branching expansion.
(expand_fix): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251521
Richard Sandiford [Wed, 30 Aug 2017 11:20:03 +0000 (11:20 +0000)]
[69/77] Split scalar-only part out of convert_mode
This patch splits the final scalar-only part of convert_mode out
into its own subroutine and treats the modes as scalar_modes there.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* expr.c (convert_mode): Split scalar handling out into...
(convert_mode_scalar): ...this new function. Treat the modes
as scalar_modes.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251520
Richard Sandiford [Wed, 30 Aug 2017 11:19:54 +0000 (11:19 +0000)]
[68/77] Use scalar_mode for is_int_mode/is_float_mode pairs
This patch uses scalar_mode for code that operates only on MODE_INT
and MODE_FLOAT.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* omp-expand.c (expand_omp_atomic): Use is_int_mode, is_float_mode
and scalar_mode.
* tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251519
Richard Sandiford [Wed, 30 Aug 2017 11:19:47 +0000 (11:19 +0000)]
[67/77] Use scalar_mode in fixed-value.*
This patch makes the fixed-value.* routines use scalar_mode.
It would be possible to define special classes for these modes, as for
scalar_int_mode and scalar_float_mode, but at the moment nothing would
benefit from them. In particular, there's no use case that would help
select between one class for all fixed-point modes versus one class for
fractional modes and one class for accumulator modes.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* fixed-value.h (fixed_from_double_int): Take a scalar_mode
rather than a machine_mode.
(fixed_from_string): Likewise.
(fixed_convert): Likewise.
(fixed_convert_from_int): Likewise.
(fixed_convert_from_real): Likewise.
(real_convert_from_fixed): Likewise.
* fixed-value.c (fixed_from_double_int): Likewise.
(fixed_from_string): Likewise.
(fixed_convert): Likewise.
(fixed_convert_from_int): Likewise.
(fixed_convert_from_real): Likewise.
(real_convert_from_fixed): Likewise.
* config/avr/avr.c (avr_out_round): Use as_a <scalar_mode>.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251518
Richard Sandiford [Wed, 30 Aug 2017 11:19:39 +0000 (11:19 +0000)]
[66/77] Use scalar_mode for constant integers
This patch treats the mode associated with an integer constant as a
scalar_mode. We can't use the more natural-sounding scalar_int_mode
because we also use (const_int 0) for bounds-checking modes. (It might
be worth adding a bounds-specific code instead, but that's for another
day.)
This exposes a latent bug in simplify_immed_subreg, which for
vectors of CONST_WIDE_INTs would pass the vector mode rather than
the element mode to rtx_mode_t.
I think the:
/* We can get a 0 for an error mark. */
|| GET_MODE_CLASS (mode) == MODE_VECTOR_INT
|| GET_MODE_CLASS (mode) == MODE_VECTOR_FLOAT
in immed_double_const is dead. trunc_int_mode (via gen_int_mode)
would go on to ICE if the mode fitted in a HWI, and surely plenty
of other code would be confused to see a const_int be interpreted
as a vector. We should instead be using CONST0_RTX (mode) if we
need a safe constant for a particular mode.
We didn't try to make these functions take scalar_mode arguments
because in many cases that would be too invasive at this stage.
Maybe it would become feasible in future. Also, the long-term
direction should probably be to add modes to constant integers
rather than have then as VOIDmode odd-ones-out. That would remove
the need for rtx_mode_t and thus remove the question whether they
should use scalar_int_mode, scalar_mode or machine_mode.
The patch also uses scalar_mode for the CONST_DOUBLE handling
in loc_descriptor. In that case the mode can legitimately be
either floating-point or integral.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* emit-rtl.c (immed_double_const): Use is_a <scalar_mode> instead
of separate mode class checks. Do not allow vector modes here.
(immed_wide_int_const): Use as_a <scalar_mode>.
* explow.c (trunc_int_for_mode): Likewise.
* rtl.h (wi::int_traits<rtx_mode_t>::get_precision): Likewise.
(wi::shwi): Likewise.
(wi::min_value): Likewise.
(wi::max_value): Likewise.
* dwarf2out.c (loc_descriptor): Likewise.
* simplify-rtx.c (simplify_immed_subreg): Fix rtx_mode_t argument
for CONST_WIDE_INT.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251517
Richard Sandiford [Wed, 30 Aug 2017 11:19:29 +0000 (11:19 +0000)]
[65/77] Add a SCALAR_TYPE_MODE macro
This patch adds a SCALAR_TYPE_MODE macro, along the same lines as
SCALAR_INT_TYPE_MODE and SCALAR_FLOAT_TYPE_MODE. It also adds
two instances of as_a <scalar_mode> to c_common_type, when converting
an unsigned fixed-point SCALAR_TYPE_MODE to the equivalent signed mode.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* tree.h (SCALAR_TYPE_MODE): New macro.
* expr.c (expand_expr_addr_expr_1): Use it.
(expand_expr_real_2): Likewise.
* fold-const.c (fold_convert_const_fixed_from_fixed): Likeise.
(fold_convert_const_fixed_from_int): Likewise.
(fold_convert_const_fixed_from_real): Likewise.
(native_encode_fixed): Likewise
(native_encode_complex): Likewise
(native_encode_vector): Likewise.
(native_interpret_fixed): Likewise.
(native_interpret_real): Likewise.
(native_interpret_complex): Likewise.
(native_interpret_vector): Likewise.
* omp-simd-clone.c (simd_clone_adjust_return_type): Likewise.
(simd_clone_adjust_argument_types): Likewise.
(simd_clone_init_simd_arrays): Likewise.
(simd_clone_adjust): Likewise.
* stor-layout.c (layout_type): Likewise.
* tree.c (build_minus_one_cst): Likewise.
* tree-cfg.c (verify_gimple_assign_ternary): Likewise.
* tree-inline.c (estimate_move_cost): Likewise.
* tree-ssa-math-opts.c (convert_plusminus_to_widen): Likewise.
* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise.
(vectorizable_reduction): Likewise.
* tree-vect-patterns.c (vect_recog_widen_mult_pattern): Likewise.
(vect_recog_mixed_size_cond_pattern): Likewise.
(check_bool_pattern): Likewise.
(adjust_bool_pattern): Likewise.
(search_type_for_mask_1): Likewise.
* tree-vect-slp.c (vect_schedule_slp_instance): Likewise.
* tree-vect-stmts.c (vectorizable_conversion): Likewise.
(vectorizable_load): Likewise.
(vectorizable_store): Likewise.
* ubsan.c (ubsan_encode_value): Likewise.
* varasm.c (output_constant): Likewise.
gcc/c-family/
* c-lex.c (interpret_fixed): Use SCALAR_TYPE_MODE.
* c-common.c (c_build_vec_perm_expr): Likewise.
gcc/c/
* c-typeck.c (build_binary_op): Use SCALAR_TYPE_MODE.
(c_common_type): Likewise. Use as_a <scalar_mode> when setting
m1 and m2 to the signed equivalent of a fixed-point
SCALAR_TYPE_MODE.
gcc/cp/
* typeck.c (cp_build_binary_op): Use SCALAR_TYPE_MODE.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251516
Richard Sandiford [Wed, 30 Aug 2017 11:19:17 +0000 (11:19 +0000)]
[64/77] Add a scalar_mode class
This patch adds a scalar_mode class that can hold any scalar mode,
specifically:
- scalar integers
- scalar floating-point values
- scalar fractional modes
- scalar accumulator modes
- pointer bounds modes
To start with this patch uses this type for GET_MODE_INNER.
Later patches add more uses.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* coretypes.h (scalar_mode): New class.
* machmode.h (scalar_mode): Likewise.
(scalar_mode::includes_p): New function.
(mode_to_inner): Return a scalar_mode rather than a machine_mode.
* gdbhooks.py (build_pretty_printers): Handle scalar_mode.
* genmodes.c (get_mode_class): Handle remaining scalar modes.
* cfgexpand.c (expand_debug_expr): Use scalar_mode.
* expmed.c (store_bit_field_1): Likewise.
(extract_bit_field_1): Likewise.
* expr.c (write_complex_part): Likewise.
(read_complex_part): Likewise.
(emit_move_complex_push): Likewise.
(expand_expr_real_2): Likewise.
* function.c (assign_parm_setup_reg): Likewise.
(assign_parms_unsplit_complex): Likewise.
* optabs.c (expand_binop): Likewise.
* rtlanal.c (subreg_get_info): Likewise.
* simplify-rtx.c (simplify_immed_subreg): Likewise.
* varasm.c (output_constant_pool_2): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251515
Richard Sandiford [Wed, 30 Aug 2017 11:19:08 +0000 (11:19 +0000)]
[63/77] Simplifications after type switch
This patch makes a few simplifications after the previous
mechanical machine_mode->scalar_int_mode change.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* expmed.c (extract_high_half): Use scalar_int_mode and remove
assertion.
(expmed_mult_highpart_optab): Likewise.
(expmed_mult_highpart): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251514
Richard Sandiford [Wed, 30 Aug 2017 11:18:59 +0000 (11:18 +0000)]
[62/77] Big machine_mode to scalar_int_mode replacement
This patch changes the types of various things from machine_mode
to scalar_int_mode, in cases where (after previous patches)
simply changing the type is enough on its own. The patch does
nothing other than that.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* builtins.h (builtin_strncpy_read_str): Take a scalar_int_mode
instead of a machine_mode.
(builtin_memset_read_str): Likewise.
* builtins.c (c_readstr): Likewise.
(builtin_memcpy_read_str): Likewise.
(builtin_strncpy_read_str): Likewise.
(builtin_memset_read_str): Likewise.
(builtin_memset_gen_str): Likewise.
(expand_builtin_signbit): Use scalar_int_mode for local variables.
* cfgexpand.c (convert_debug_memory_address): Take a scalar_int_mode
instead of a machine_mode.
* combine.c (simplify_if_then_else): Use scalar_int_mode for local
variables.
(make_extraction): Likewise.
(try_widen_shift_mode): Take and return scalar_int_modes instead
of machine_modes.
* config/aarch64/aarch64.c (aarch64_libgcc_cmp_return_mode): Return
a scalar_int_mode instead of a machine_mode.
* config/avr/avr.c (avr_addr_space_address_mode): Likewise.
(avr_addr_space_pointer_mode): Likewise.
* config/cr16/cr16.c (cr16_unwind_word_mode): Likewise.
* config/msp430/msp430.c (msp430_addr_space_pointer_mode): Likewise.
(msp430_unwind_word_mode): Likewise.
* config/spu/spu.c (spu_unwind_word_mode): Likewise.
(spu_addr_space_pointer_mode): Likewise.
(spu_addr_space_address_mode): Likewise.
(spu_libgcc_cmp_return_mode): Likewise.
(spu_libgcc_shift_count_mode): Likewise.
* config/rl78/rl78.c (rl78_addr_space_address_mode): Likewise.
(rl78_addr_space_pointer_mode): Likewise.
(fl78_unwind_word_mode): Likewise.
(rl78_valid_pointer_mode): Take a scalar_int_mode instead of a
machine_mode.
* config/alpha/alpha.c (vms_valid_pointer_mode): Likewise.
* config/ia64/ia64.c (ia64_vms_valid_pointer_mode): Likewise.
* config/mips/mips.c (mips_mode_rep_extended): Likewise.
(mips_valid_pointer_mode): Likewise.
* config/tilegx/tilegx.c (tilegx_mode_rep_extended): Likewise.
* config/ft32/ft32.c (ft32_valid_pointer_mode): Likewise.
(ft32_addr_space_pointer_mode): Return a scalar_int_mode instead
of a machine_mode.
(ft32_addr_space_address_mode): Likewise.
* config/m32c/m32c.c (m32c_valid_pointer_mode): Take a
scalar_int_mode instead of a machine_mode.
(m32c_addr_space_pointer_mode): Return a scalar_int_mode instead
of a machine_mode.
(m32c_addr_space_address_mode): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_abi_word_mode): Likewise.
(rs6000_eh_return_filter_mode): Likewise.
* config/rs6000/rs6000.c (rs6000_abi_word_mode): Likewise.
(rs6000_eh_return_filter_mode): Likewise.
* config/s390/s390.c (s390_libgcc_cmp_return_mode): Likewise.
(s390_libgcc_shift_count_mode): Likewise.
(s390_unwind_word_mode): Likewise.
(s390_valid_pointer_mode): Take a scalar_int_mode rather than a
machine_mode.
* target.def (mode_rep_extended): Likewise.
(valid_pointer_mode): Likewise.
(addr_space.valid_pointer_mode): Likewise.
(eh_return_filter_mode): Return a scalar_int_mode rather than
a machine_mode.
(libgcc_cmp_return_mode): Likewise.
(libgcc_shift_count_mode): Likewise.
(unwind_word_mode): Likewise.
(addr_space.pointer_mode): Likewise.
(addr_space.address_mode): Likewise.
* doc/tm.texi: Regenerate.
* dojump.c (prefer_and_bit_test): Take a scalar_int_mode rather than
a machine_mode.
(do_jump): Use scalar_int_mode for local variables.
* dwarf2cfi.c (init_return_column_size): Take a scalar_int_mode
rather than a machine_mode.
* dwarf2out.c (convert_descriptor_to_mode): Likewise.
(scompare_loc_descriptor_wide): Likewise.
(scompare_loc_descriptor_narrow): Likewise.
* emit-rtl.c (adjust_address_1): Use scalar_int_mode for local
variables.
* except.c (sjlj_emit_dispatch_table): Likewise.
(expand_builtin_eh_copy_values): Likewise.
* explow.c (convert_memory_address_addr_space_1): Likewise.
Take a scalar_int_mode rather than a machine_mode.
(convert_memory_address_addr_space): Take a scalar_int_mode rather
than a machine_mode.
(memory_address_addr_space): Use scalar_int_mode for local variables.
* expmed.h (expand_mult_highpart_adjust): Take a scalar_int_mode
rather than a machine_mode.
* expmed.c (mask_rtx): Likewise.
(init_expmed_one_conv): Likewise.
(expand_mult_highpart_adjust): Likewise.
(extract_high_half): Likewise.
(expmed_mult_highpart_optab): Likewise.
(expmed_mult_highpart): Likewise.
(expand_smod_pow2): Likewise.
(expand_sdiv_pow2): Likewise.
(emit_store_flag_int): Likewise.
(adjust_bit_field_mem_for_reg): Use scalar_int_mode for local
variables.
(extract_low_bits): Likewise.
* expr.h (by_pieces_constfn): Take a scalar_int_mode rather than
a machine_mode.
* expr.c (pieces_addr::adjust): Likewise.
(can_store_by_pieces): Likewise.
(store_by_pieces): Likewise.
(clear_by_pieces_1): Likewise.
(expand_expr_addr_expr_1): Likewise.
(expand_expr_addr_expr): Use scalar_int_mode for local variables.
(expand_expr_real_1): Likewise.
(try_casesi): Likewise.
* final.c (shorten_branches): Likewise.
* fold-const.c (fold_convert_const_int_from_fixed): Change the
type of "mode" to machine_mode.
* internal-fn.c (expand_arith_overflow_result_store): Take a
scalar_int_mode rather than a machine_mode.
(expand_mul_overflow): Use scalar_int_mode for local variables.
* loop-doloop.c (doloop_modify): Likewise.
(doloop_optimize): Likewise.
* optabs.c (expand_subword_shift): Take a scalar_int_mode rather
than a machine_mode.
(expand_doubleword_shift_condmove): Likewise.
(expand_doubleword_shift): Likewise.
(expand_doubleword_clz): Likewise.
(expand_doubleword_popcount): Likewise.
(expand_doubleword_parity): Likewise.
(expand_absneg_bit): Use scalar_int_mode for local variables.
(prepare_float_lib_cmp): Likewise.
* rtl.h (convert_memory_address_addr_space_1): Take a scalar_int_mode
rather than a machine_mode.
(convert_memory_address_addr_space): Likewise.
(get_mode_bounds): Likewise.
(get_address_mode): Return a scalar_int_mode rather than a
machine_mode.
* rtlanal.c (get_address_mode): Likewise.
* stor-layout.c (get_mode_bounds): Take a scalar_int_mode rather
than a machine_mode.
* targhooks.c (default_mode_rep_extended): Likewise.
(default_valid_pointer_mode): Likewise.
(default_addr_space_valid_pointer_mode): Likewise.
(default_eh_return_filter_mode): Return a scalar_int_mode rather
than a machine_mode.
(default_libgcc_cmp_return_mode): Likewise.
(default_libgcc_shift_count_mode): Likewise.
(default_unwind_word_mode): Likewise.
(default_addr_space_pointer_mode): Likewise.
(default_addr_space_address_mode): Likewise.
* targhooks.h (default_eh_return_filter_mode): Likewise.
(default_libgcc_cmp_return_mode): Likewise.
(default_libgcc_shift_count_mode): Likewise.
(default_unwind_word_mode): Likewise.
(default_addr_space_pointer_mode): Likewise.
(default_addr_space_address_mode): Likewise.
(default_mode_rep_extended): Take a scalar_int_mode rather than
a machine_mode.
(default_valid_pointer_mode): Likewise.
(default_addr_space_valid_pointer_mode): Likewise.
* tree-ssa-address.c (addr_for_mem_ref): Use scalar_int_mode for
local variables.
* tree-ssa-loop-ivopts.c (get_shiftadd_cost): Take a scalar_int_mode
rather than a machine_mode.
* tree-switch-conversion.c (array_value_type): Use scalar_int_mode
for local variables.
* tree-vrp.c (simplify_float_conversion_using_ranges): Likewise.
* var-tracking.c (use_narrower_mode): Take a scalar_int_mode rather
than a machine_mode.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251513
Richard Sandiford [Wed, 30 Aug 2017 11:18:45 +0000 (11:18 +0000)]
[60/77] Pass scalar_int_modes to do_jump_by_parts_*
The callers of do_jump_by_parts_* had already established
that the modes were MODE_INTs, so this patch passes the
modes down as scalar_int_modes.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* dojump.c (do_jump_by_parts_greater_rtx): Change the type of
the mode argument to scalar_int_mode.
(do_jump_by_parts_zero_rtx): Likewise.
(do_jump_by_parts_equality_rtx): Likewise.
(do_jump_by_parts_greater): Take a mode argument.
(do_jump_by_parts_equality): Likewise.
(do_jump_1): Update calls accordingly.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251512
Richard Sandiford [Wed, 30 Aug 2017 11:18:37 +0000 (11:18 +0000)]
[59/77] Add a rtx_jump_table_data::get_data_mode helper
This patch adds a helper function to get the mode of the addresses
or offsets in a jump table. It also changes the final.c code to use
rtx_jump_table_data over rtx or rtx_insn in cases where it needed
to use the new helper. This in turn meant adding a safe_dyn_cast
equivalent of safe_as_a, to cope with null NEXT_INSNs.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* is-a.h (safe_dyn_cast): New function.
* rtl.h (rtx_jump_table_data::get_data_mode): New function.
(jump_table_for_label): Likewise.
* final.c (final_addr_vec_align): Take an rtx_jump_table_data *
instead of an rtx_insn *.
(shorten_branches): Use dyn_cast instead of LABEL_P and
JUMP_TABLE_DATA_P. Use jump_table_for_label and
rtx_jump_table_data::get_data_mode.
(final_scan_insn): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251511
Richard Sandiford [Wed, 30 Aug 2017 11:18:29 +0000 (11:18 +0000)]
[58/77] Use scalar_int_mode in a try_combine optimisation
This patch uses scalar_int_modes for:
/* If I2 is setting a pseudo to a constant and I3 is setting some
sub-part of it to another constant, merge them by making a new
constant. */
This was already implicit, but the danger with checking only
CONST_SCALAR_INT_P is that it can include CC values too.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* combine.c (try_combine): Use is_a <scalar_int_mode> when
trying to combine a full-register integer set with a subreg
integer set.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251510
Richard Sandiford [Wed, 30 Aug 2017 11:18:20 +0000 (11:18 +0000)]
[57/77] Use scalar_int_mode in expand_expr_addr_expr
This patch rewrites the condition:
if (tmode != address_mode && tmode != pointer_mode)
tmode = address_mode;
to the equivalent:
tmode == pointer_mode ? pointer_mode : address_mode
The latter has the advantage that the result is naturally
a scalar_int_mode; a later mechanical patch makes it one.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* expr.c (expand_expr_addr_expr): Add a new_tmode local variable
that is always either address_mode or pointer_mode.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251509
Richard Sandiford [Wed, 30 Aug 2017 11:18:12 +0000 (11:18 +0000)]
[56/77] Use the more specific type when two modes are known to be equal
This patch adjusts a couple of cases in which we had established
that two modes were equal and happened to be using the one with the
more general type instead of the one with the more specific type.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* expr.c (expand_expr_real_2): Use word_mode instead of innermode
when the two are known to be equal.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251508
Richard Sandiford [Wed, 30 Aug 2017 11:18:02 +0000 (11:18 +0000)]
[55/77] Use scalar_int_mode in simplify_const_unary_operation
The main scalar integer block in simplify_const_unary_operation
had the condition:
if (CONST_SCALAR_INT_P (op) && width > 0)
where "width > 0" was a roundabout way of testing != VOIDmode.
This patch replaces it with a check for a scalar_int_mode instead.
It also uses the number of bits in the input rather than the output
mode to determine the result of a "count ... bits in zero" operation.
(At the momemnt these modes have to be the same, but it still seems
conceptually wrong to use the number of bits in the output mode.)
The handling of float->integer ops also checked "width > 0",
but this was redundant with the earlier check for MODE_INT.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* simplify-rtx.c (simplify_const_unary_operation): Use
is_a <scalar_int_mode> instead of checking for a nonzero
precision. Forcibly convert op_mode to a scalar_int_mode
in that case. More clearly differentiate the operand and
result modes and use the former when deciding what the value
of a count-bits operation should be. Use is_int_mode instead
of checking for a MODE_INT. Remove redundant check for whether
this mode has a zero precision.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251507
Richard Sandiford [Wed, 30 Aug 2017 11:17:54 +0000 (11:17 +0000)]
[54/77] Add explicit int checks for alternative optab implementations
expand_unop can expand narrow clz, clrsb, ctz, bswap, parity and
ffs operations using optabs for wider modes. These expansions
apply only to scalar integer modes (and not for example to vectors),
so the patch adds explicit checks for that.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* optabs.c (widen_leading): Change the type of the mode argument
to scalar_int_mode. Use opt_scalar_int_mode for the mode iterator.
(widen_bswap): Likewise.
(expand_parity): Likewise.
(expand_ctz): Change the type of the mode argument to scalar_int_mode.
(expand_ffs): Likewise.
(epand_unop): Check for scalar integer modes before calling the
above routines.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251506
Richard Sandiford [Wed, 30 Aug 2017 11:17:45 +0000 (11:17 +0000)]
[53/77] Pass a mode to const_scalar_mask_from_tree
The caller of const_scalar_mask_from_tree has proven that
the mode is a MODE_INT, so this patch passes it down as a
scalar_int_mode. It also expands the comment a little.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* expr.c (const_scalar_mask_from_tree): Add a mode argument.
Expand commentary.
(expand_expr_real_1): Update call accordingly.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251505
Richard Sandiford [Wed, 30 Aug 2017 11:17:37 +0000 (11:17 +0000)]
[52/77] Use scalar_int_mode in extract/store_bit_field
After a certain point, extract_bit_field and store_bit_field
ensure that they're dealing with integer modes or BLKmode MEMs.
This patch uses scalar_int_mode and opt_scalar_int_mode for
those parts.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* expmed.c (store_bit_field_using_insv): Add op0_mode and
value_mode arguments. Use scalar_int_mode internally.
(store_bit_field_1): Rename the new integer mode from imode
to op0_mode and use it instead of GET_MODE (op0). Update calls
to store_split_bit_field, store_bit_field_using_insv and
store_fixed_bit_field.
(store_fixed_bit_field): Add op0_mode and value_mode arguments.
Use scalar_int_mode internally. Use a bit count rather than a mode
when calculating the largest bit size for get_best_mode.
Update calls to store_split_bit_field and store_fixed_bit_field_1.
(store_fixed_bit_field_1): Add mode and value_mode arguments.
Remove assertion that OP0 has a scalar integer mode.
(store_split_bit_field): Add op0_mode and value_mode arguments.
Update calls to extract_fixed_bit_field.
(extract_bit_field_using_extv): Add an op0_mode argument.
Use scalar_int_mode internally.
(extract_bit_field_1): Rename the new integer mode from imode to
op0_mode and use it instead of GET_MODE (op0). Update calls to
extract_split_bit_field, extract_bit_field_using_extv and
extract_fixed_bit_field.
(extract_fixed_bit_field): Add an op0_mode argument. Update calls
to extract_split_bit_field and extract_fixed_bit_field_1.
(extract_fixed_bit_field_1): Add a mode argument. Remove assertion
that OP0 has a scalar integer mode. Use as_a <scalar_int_mode>
on the target mode.
(extract_split_bit_field): Add an op0_mode argument. Update call
to extract_fixed_bit_field.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251504
Richard Sandiford [Wed, 30 Aug 2017 11:17:29 +0000 (11:17 +0000)]
[51/77] Use opt_scalar_int_mode when iterating over integer modes
This patch uses opt_scalar_int_mode rather than machine_mode
when iterating over scalar_int_modes, in cases where that helps
with future patches. (Using machine_mode is still OK in places
that don't really care about the mode being a scalar integer.)
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* cse.c (cse_insn): Use opt_scalar_int_mode for the mode iterator.
* explow.c (hard_function_value): Likewise.
* expmed.c (extract_fixed_bit_field_1): Likewise. Move the
convert_to_mode call outside the loop.
* expr.c (alignment_for_piecewise_move): Use opt_scalar_int_mode
for the mode iterator. Require the mode specified by max_pieces
to exist.
(emit_block_move_via_movmem): Use opt_scalar_int_mode for the
mode iterator.
(copy_blkmode_to_reg): Likewise.
(set_storage_via_setmem): Likewise.
* optabs.c (prepare_cmp_insn): Likewise.
* rtlanal.c (init_num_sign_bit_copies_in_rep): Likewise.
* stor-layout.c (finish_bitfield_representative): Likewise.
gcc/fortran/
* trans-types.c (gfc_init_kinds): Use opt_scalar_int_mode for
the mode iterator.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251503
Richard Sandiford [Wed, 30 Aug 2017 11:17:20 +0000 (11:17 +0000)]
[50/77] Add helper routines for SUBREG_PROMOTED_VAR_P subregs
When subregs contain promoted values, as indicated by
SUBREG_PROMOTED_VAR_P, both the unpromoted (outer) and
promoted (inner) values are known to be scalar integers.
This patch adds helper routines that get the modes as
scalar_int_modes.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* rtl.h (subreg_unpromoted_mode, subreg_promoted_mode): New functions.
* expr.c (convert_move): Use them.
(convert_modes): Likewise.
(store_expr_with_bounds): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251502
Richard Sandiford [Wed, 30 Aug 2017 11:17:12 +0000 (11:17 +0000)]
[49/77] Simplify nonzero/num_sign_bits hooks
The two implementations of the reg_nonzero_bits and reg_num_sign_bits
hooks ignored the "known_x", "known_mode" and "known_ret" arguments,
so this patch removes them. It adds a new scalar_int_mode parameter
that specifies the mode of "x". (This mode might be different from
"mode", which is the mode in which "x" is used.)
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* rtl.h (rtl_hooks::reg_nonzero_bits): Add a scalar_int_mode
parameter for the mode of "x". Remove the "known_x", "known_mode"
and "known_ret" arguments. Change the type of the mode argument
to scalar_int_mode.
(rtl_hooks:reg_num_sign_bit_copies): Likewise.
* combine.c (reg_nonzero_bits_for_combine): Update accordingly.
(reg_num_sign_bit_copies_for_combine): Likewise.
* rtlanal.c (nonzero_bits1): Likewise.
(num_sign_bit_copies1): Likewise.
* rtlhooks-def.h (reg_nonzero_bits_general): Likewise.
(reg_num_sign_bit_copies_general): Likewise.
* rtlhooks.c (reg_num_sign_bit_copies_general): Likewise.
(reg_nonzero_bits_general): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251501
Richard Sandiford [Wed, 30 Aug 2017 11:17:01 +0000 (11:17 +0000)]
[48/77] Make subroutines of num_sign_bit_copies operate on scalar_int_mode
Similarly to the nonzero_bits patch, this one moves the mode
class check and VOIDmode handling from num_sign_bit_copies1
to num_sign_bit_copies itself, then changes the subroutines
to operate on scalar_int_modes.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* rtlanal.c (num_sign_bit_copies): Handle VOIDmode here rather
than in subroutines. Return 1 for non-integer modes.
(cached_num_sign_bit_copies): Change the type of the mode parameter
to scalar_int_mode.
(num_sign_bit_copies1): Likewise. Remove early exit for other mode
classes. Handle CONST_INT_P first and then check whether X also
has a scalar integer mode. Check the same thing for inner registers
of a SUBREG and for values that are being extended or truncated.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251500
Richard Sandiford [Wed, 30 Aug 2017 11:16:42 +0000 (11:16 +0000)]
[47/77] Make subroutines of nonzero_bits operate on scalar_int_mode
nonzero_bits1 assumed that all bits of a floating-point or vector mode
were needed. It seems likely that fixed-point modes should have been
handled in the same way. After excluding those, the only remaining
modes that are likely to be useful are scalar integer ones.
This patch moves the mode class check to nonzero_bits itself, along
with the handling of mode == VOIDmode. The subroutines of nonzero_bits
can then take scalar_int_modes.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* rtlanal.c (nonzero_bits): Handle VOIDmode here rather than
in subroutines. Return the mode mask for non-integer modes.
(cached_nonzero_bits): Change the type of the mode parameter
to scalar_int_mode.
(nonzero_bits1): Likewise. Remove early exit for other mode
classes. Handle CONST_INT_P first and then check whether X
also has a scalar integer mode.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251499
Richard Sandiford [Wed, 30 Aug 2017 11:16:12 +0000 (11:16 +0000)]
[46/77] Make widest_int_mode_for_size return a scalar_int_mode
The comment for widest_int_mode said that it returns "the widest integer
mode no wider than SIZE", but it actually returns the widest integer
mode that is narrower than SIZE. In practice SIZE is always greater
than 1, so it can always pick QImode in the worst case. The VOIDmode
paths seem to be dead.
gcc/
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* expr.c (widest_int_mode_for_size): Make the comment match the code.
Return a scalar_int_mode and assert that the size is greater than
one byte.
(by_pieces_ninsns): Update accordingly and remove VOIDmode handling.
(op_by_pieces_d::op_by_pieces_d): Likewise.
(op_by_pieces_d::run): Likewise.
(can_store_by_pieces): Likewise.
From-SVN: r251498
Richard Sandiford [Wed, 30 Aug 2017 11:16:05 +0000 (11:16 +0000)]
[45/77] Make extract_left_shift take a scalar_int_mode
This patch passes the mode of the shifted value to extract_left_shift
and updates the only caller so that the mode is a scalar_int_mode.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* combine.c (extract_left_shift): Add a mode argument and update
recursive calls.
(make_compound_operation_int): Change the type of the mode parameter
to scalar_int_mode and update the call to extract_left_shift.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251497
Richard Sandiford [Wed, 30 Aug 2017 11:15:53 +0000 (11:15 +0000)]
[44/77] Make simplify_and_const_int take a scalar_int_mode
After previous patches, top-level calls to simplify_and_const_int
always pass a scalar_int_mode. The only call site that needs to
be updated is the recursive one in simplify_and_const_int_1,
at which point we know "varop" has a scalar integer mode.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* combine.c (simplify_and_const_int): Change the type of the mode
parameter to scalar_int_mode.
(simplify_and_const_int_1): Likewise. Update recursive call.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251496
Richard Sandiford [Wed, 30 Aug 2017 11:15:46 +0000 (11:15 +0000)]
[43/77] Use scalar_int_mode in simplify_comparison
The main loop of simplify_comparison starts with:
if (GET_MODE_CLASS (mode) != MODE_INT
&& ! (mode == VOIDmode
&& (GET_CODE (op0) == COMPARE || COMPARISON_P (op0))))
break;
So VOIDmode is only acceptable when comparing a COMPARE,
EQ, NE, etc. operand against a constant. After this, the loop
calls simplify_compare_const to:
(a) bring the constant op1 closer to 0 where possible and
(b) use nonzero_bits and num_sign_bit_copies to get a simpler
constant.
(a) works for both integer and VOID modes, (b) is specific
to integer modes.
The loop then has a big switch statement that handles further
simplifications. This switch statement checks for COMPARISON_P
codes but not for COMPARE.
This patch uses scalar_int_mode to make the split between
(a) and (b) more explicit. It also takes the COMPARISON_P
handling out of the switch statement and does it first,
so that the rest of the loop can treat the mode as a
scalar_int_mode.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* combine.c (simplify_compare_const): Check that the mode is a
scalar_int_mode (rather than VOIDmode) before testing its
precision.
(simplify_comparison): Move COMPARISON_P handling out of the
loop and restrict the latter part of the loop to scalar_int_modes.
Check is_a <scalar_int_mode> before calling HWI_COMPUTABLE_MODE_P
and when considering SUBREG_REGs. Use is_int_mode instead of
checking GET_MODE_CLASS against MODE_INT.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251495
Richard Sandiford [Wed, 30 Aug 2017 11:15:38 +0000 (11:15 +0000)]
[42/77] Use scalar_int_mode in simplify_shift_const_1
This patch makes simplify_shift_const_1 use scalar_int_modes
for all code that is specific to scalars rather than vectors.
This includes situations in which the new shift mode is different
from the original one, since the function never changes the mode
of vector shifts. That in turn makes it more natural to test for
equal modes in simplify_shift_const_1 rather than try_widen_shift_mode
(which only applies to scalars).
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* combine.c (try_widen_shift_mode): Move check for equal modes to...
(simplify_shift_const_1): ...here. Use scalar_int_mode for
shift_unit_mode and for modes involved in scalar shifts.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251494
Richard Sandiford [Wed, 30 Aug 2017 11:15:28 +0000 (11:15 +0000)]
[41/77] Split scalar integer handling out of force_to_mode
force_to_mode exits partway through for modes that aren't scalar
integers. This patch splits the remainder of the function out
into a subroutine, force_int_to_mode, so that the modes from that
point on can have type scalar_int_mode.
The patch also makes sure that xmode is kept up-to-date with x
and uses xmode instead of GET_MODE (x) throughout.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* combine.c (force_int_to_mode): New function, split out from...
(force_to_mode): ...here. Keep xmode up-to-date and use it
instead of GET_MODE (x).
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251493
Richard Sandiford [Wed, 30 Aug 2017 11:14:59 +0000 (11:14 +0000)]
[40/77] Use scalar_int_mode for extraction_insn fields
insv, extv and eztzv modify or read a field in a register or
memory. The field always has a scalar integer mode, while the
register or memory either has a scalar integer mode or BLKmode.
The mode of the bit position is also a scalar integer.
This patch uses the type system to make that explicit.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* optabs-query.h (extraction_insn::struct_mode): Change type to
opt_scalar_int_mode and update comment.
(extraction_insn::field_mode): Change type to scalar_int_mode.
(extraction_insn::pos_mode): Likewise.
* combine.c (make_extraction): Update accordingly.
* optabs-query.c (get_traditional_extraction_insn): Likewise.
(get_optab_extraction_insn): Likewise.
* recog.c (simplify_while_replacing): Likewise.
* expmed.c (narrow_bit_field_mem): Change the type of the mode
parameter to opt_scalar_int_mode.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251492
projects / gcc.git / log