util/vma: Factor out the hole splitting part of util_vma_heap_alloc

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Add an explicit_address parameter to anv_device_alloc_bo

We already have a mechanism for specifying that we want a fixed address
provided by the driver internals.  We're about to let the client start
specifying addresses in some very special scenarios as well so we want
to pass this through to the allocation function.

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Stop advertising two heaps just for the VF cache WA

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Set up VMA heaps independently from memory heaps

Our VMA allocations are really independent from the memory heaps we
expose via the API.  The only thing that really matters is the GTT size
so we can make the high heap the right size.

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Stop tracking VMA allocations

util_vma_heap_alloc will already return 0 if it doesn't have enough
space.  The only thing the vma_*_available tracking was doing was
preventing us from allocating too much on any given heap.  Now that
we're tracking that in the heap itself, we can drop these.

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Disallow allocating above heap sizes

We're already tracking the amount of memory used in each heap.  This
commit just makes us start rejecting memory allocations if the heap
would grow too large.

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

util/atomic: Add a _return variant of p_atomic_add

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Don't leak when set_tiling fails

Fixes: a44744e01d73 "anv: Require a dedicated allocation for..."
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Use PIPE_CONTROL flushes to implement the gen8 VF cache WA

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Apply cache flushes after setting index/draw VBs

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Always invalidate the VF cache in BeginCommandBuffer

I think the reason why we only do this for primaries is that we didn't
expect to have blorp calls in secondaries.  However, you are allowed to
have a full render pass in a secondary command buffer so resolves and
clears can end up in there.  We should just always invalidate.

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

blorp: Pass the VB size to the VF cache workaround

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Add a has_softpin boolean

This separates "has" from "use" which will make the next commit a bit
cleaner.

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Drop bo_flags from anv_bo_pool

In ee77938733cd, we started using the BO cache for anv_bo_pool and
stopped using the bo_flags parameter.  However, we never dropped it from
the struct or the init function.

Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

glsl/tests: Use splitlines() instead of strip()

strip() removes leading and trailing newlines, but leaves newlines
between multiple lines in the string. This could cause failures when
comparing the output of cross-compiled Windows binaries (producing
Windows-style newlines) to the expected output with Unix-style newlines.

Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

android: radeonsi: fix build after vl refactoring (v2)

vl functions moved from radeonsi to gallium/auxiliary/vl have left
android build of radeonsi in broken state.

libmesa_galliumvl static is need to build readeonsi,
gallium_dri building rules are reworked to avoid multiple symbols
and libmesa_galliumvl static dependency is needed in radeonsi.

Here is the changelog:
- android: gallium/auxiliary: add libmesa_galliumvl static
- android: gallium_dri: move libmesa_gallium to static to prevent multiple symbols
- android: radeonsi: fix build after vl refactoring

Fixes the following building error:

external/mesa/src/gallium/drivers/radeonsi/si_uvd.c:47:
error: undefined reference to 'vl_video_buffer_create_as_resource'
clang.real: error: linker command failed with exit code 1 (use -v to see invocation)

Fixes: 86e60bc ("radeonsi: remove si_vid_join_surfaces and use combined planar allocations")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

intel/compiler: force simd8 when dual src blending on gen8

Patch introduces option to force simd8 and uses it as a workaround for
dual source blending issues seen with skqp (skia testsuite) on gen8.

Fixes following Piglit test on gen8 platforms:
   arb_blend_func_extended-dual-src-blending-issue-1917

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1917
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
c: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel/compiler: add newline to limit_dispatch_width message

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

turnip: Add support for compute shaders.

Since compute shares the FS state with graphics, we have to re-upload the
pipeline state when switching between compute dispatch and graphics draws.
We could potentially expose graphics and compute as separate queues and
then we wouldn't need pipeline state management, but the closed driver
exposes a single queue and consistency with them is probably good.

So far I'm emitting texture/ibo state as IBs that we jump to.  This is
kind of silly when we could just emit it directly in our CS, but that's a
refactor we can do later.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>

turnip: Move pipeline BO list adding to BindPipeline.

We only need to do it once when we bind, rather than having to check at
every draw call.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>

turnip: Sanity check that we're adding valid BOs to the list.

I tripped over this during CS enabling when my program BO wasn't set up.
Easier to debug this way than the kernel telling us a 0 handle is invalid.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>

turnip: Add a helper function for getting tu_buffer iovas.

Easier than remembering to add all 3 offsets.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>

turnip: Refactor the graphics pipeline create implementation.

The loop over the pipelines to create (and the failure handling) was
noisy, and the stub for compute setup looked nicer to me.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>

turnip: Add basic SSBO support.

This is enough to pass
dEQP-VK.binding_model.shader_access.primary_cmd_buf.storage_buffer.fragment.single_descriptor.*
with fragmentStoresAndAtomics set, and thus to be able to start working on
compute.  I haven't enabled that flag yet, because it also implies image
load/store support, which I haven't filled in.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>

turnip: Reuse tu6_stage2opcode() more.

A bit of cleanup for adding more stages later.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>

turnip: Drop redefinition of VALIDREG now that it's in ir3.h.

Fixes: 937b9055698b ("freedreno/ir3: fix neverball assert in case of unused VS inputs")
Reviewed-by: Jonathan Marek <jonathan@marek.ca>

turnip: Fix unused variable warnings.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>

glsl: make use of active_shader_mask when building resource list

This allows us to avoid walking the entire IR looking for used
uniforms.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: don't set uniform block as used when its not

The spec requires unused uniform block to be set as active in the
program resource list. To support this we tell opt dead code not to
remove them. However we can mark them as unused internally and
avoid unnecessarily state changes.

This change is also required for the folowing clean-up patch.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: move calculate_array_size_and_stride() to link_uniforms.cpp

This is where all the other uniform values are populated so it
makes much more sense here. Moving it will also allow us to better
share code between the NIR and GLSL IR resource list builders.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

anv: Fix error message format string

See also 246261f0addf

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
CID: 1455892
Fixes: 246261f0add ("anv: prepare the driver for delayed submissions")

mesa: Silence unused parameter warning

Unused since e4da8b9c331 ("mesa/compiler: rework tear down of
builtin/types").

src/mesa/main/context.c: In function ‘_mesa_free_context_data’:
src/mesa/main/context.c:1321:54: warning: unused parameter ‘destroy_compiler_types’ [-Wunused-parameter]
 1321 | _mesa_free_context_data(struct gl_context *ctx, bool destroy_compiler_types)
      |                                                      ^

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

mesa: Silence 'left shift of negative value' warning in BPTC compression code

src/util/format/../../mesa/main/texcompress_bptc_tmp.h:830:31: warning: left shift of negative value [-Wshift-negative-value]
  830 |       value |= (~(int32_t) 0) << n_bits;
      |                               ^~

v2: Rewrite to just shift left then shift right.  Based on conversation
with Neil in
https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2792#note_320272,
this should be fine.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> [v1]
Reviewed-by: Neil Roberts <nroberts@igalia.com>

intel/compiler: Fix 'comparison is always true' warning

Without looking at the assembly or something, I'm not sure what the
compiler does here.  The brw_reg_type enum is marked packed, so I'm
guess that it gets represented as a uint8_t.  That's the only reason I
could think that comparing with -1 would be always true.

This patch adds the same cast that exists in brw_hw_type_to_reg_type.
It might be better to add a #define outside the enum for
BRW_REGISTER_TYPE_INVALID as (enum brw_reg_type)-1.

src/intel/compiler/brw_eu_compact.c: In function ‘has_immediate’:
src/intel/compiler/brw_eu_compact.c:1515:20: warning: comparison is always true due to limited range of data type [-Wtype-limits]
 1515 |       return *type != -1;
      |                    ^~
src/intel/compiler/brw_eu_compact.c:1518:20: warning: comparison is always true due to limited range of data type [-Wtype-limits]
 1518 |       return *type != -1;
      |                    ^~

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
CID: 1455194
Fixes: 12d3b11908e ("intel/compiler: Add instruction compaction support on Gen12")
Cc: @mattst88

docs: Update mesa 19.3 release calendar

docs: update calendar, add news item and link release notes for 19.2.7

docs: Add SHA256 sums for 19.2.7

docs: Add release notes for 19.2.7

turnip: allow writes to draw_cs outside of render pass

This is for state commands like CmdSetViewport that can be used outside of
a renderpass. Accumulating those into draw_cs outside of the renderpass
should have the desired effect.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>

nir/lower_clip: Fix incorrect driver loc for clipdist outputs

Somehow adjusting maxloc based on existing outputs got lost, resulting
in the clipdist varying clobbering the position varying.  Causing a
shader that had no position output in freedreno/ir3, which triggers GPU
hangs in neverball.

Fixes: d0f746b6458 ("nir: Save nir_variable pointers in nir_lower_clip_vs rather than locs.")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

freedreno/ir3: fix neverball assert in case of unused VS inputs

The logic to ensure VS and BS inputs are aligned wasn't accounting for
unused inputs in VS.  This *usually* doesn't happen, but it seems it
can in the case of ARB programs?

Fixes assert:
```
fd6_program_create: Assertion `bs->inputs[i].regid == vs->inputs[i].regid' failed.
```

Fixes: 882d53d8e36 ("freedreno/ir3+a6xx: same VBO state for draw/binning")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

freedreno/ir3: remove store_output lowered to store_shared_ir3

Fixes crashes that were unnoticed in CI because debug_assert() was not
enabled (but become real crashes after the next patch):

dEQP-GLES31.functional.shaders.builtin_functions.integer.bitfieldextract.ivec2_highp_geometry
dEQP-GLES31.functional.shaders.builtin_functions.integer.bitfieldextract.ivec2_lowp_geometry
dEQP-GLES31.functional.shaders.builtin_functions.integer.bitfieldextract.ivec2_mediump_geometry
dEQP-GLES31.functional.shaders.builtin_functions.integer.bitfieldextract.uvec2_highp_geometry
dEQP-GLES31.functional.shaders.builtin_functions.integer.bitfieldextract.uvec2_lowp_geometry
dEQP-GLES31.functional.shaders.builtin_functions.integer.bitfieldextract.uvec2_mediump_geometry

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

iris: Add restriction to 3DSTATE_CONSTANT_ packets.

The following programming note shows up in all 3DSTATE_CONSTANT_*
packets:

   "The sum of all four read length fields must be less than or equal to
   the size of 64."

The backend compiler should guarantee this for us, so let's just add a
check here.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

anv: Use 3DSTATE_CONSTANT_ALL when possible.

Use this new instruction introduced in Gen12. The instruction itself is
smaller, and it also allows us to emit a single instruction to all
stages that have the same push constant buffers (e.g. when they don't
have constant buffers).

There's one restriction to use this instruction, though: the length
field is only 5 bits long, so we need to check whether we can use it,
and fallback to the old 3DSTATE_CONSTANT_XS if that field is >= 32.

v2:
 - Rebased on top of the lasted changes from Jason.
 - Added review suggestions by Caio.
 - Removed struct push_bos and merged some code into
 anv_nir_compute_push_layout().

v3:
 - Remove code churn due to gen8+ workaround in
 anv_nir_compute_push_layout(). This code has been removed in an earlier
 commit, and implemented in cmd_buffer_emit_push_constant().

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

anv: Move code for emitting push constants into its own function.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

anv: Add get_push_range_address() helper.

Add a helper function to get the push range address. Once we have a
separate function for emitting gen12 push constants, we can use this
helper and avoid duplicating code.

v3: Do not add range->start to the address in gen7 (Caio).
v4: Do not drop range->start from gen7 (Caio, Jason).

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

anv: Move gen8+ push constant packet workaround.

Store push_ranges in ascending order, and only "shift" them to the end
of the array during state packet emission.

We don't need this workaround with the new 3DSTATE_CONSTANT_ALL packet.
So instead of applying the workaround here just for GEN < 12 (which
requires and extra loop through all the ranges to figure out if we
should shift them or not), we simply move the whole logic to the state
emission code. At that point, in a later commit, we are already looping
through all of the ranges anyway to check which packet we will be using,
so we might as well implement the workaround there, where it is going to
be used.

v3: Move gen8+ workaround to the state emission code (Caio).
v4: Add explanation of why we moved the workaroudn (Caio).

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

iris: Use 3DSTATE_CONSTANT_ALL when possible.

Use this new instruction introduced in Gen12. The instruction itself is
smaller, and it also allows us to emit a single instruction to all
stages that have the same push constant buffers (e.g. when they don't
have constant buffers).

There's one restriction to use this instruction, though: the length
field is only 5 bits long, so we need to check whether we can use it,
and fallback to the old 3DSTATE_CONSTANT_XS if that field is >= 32.

v2 (Suggestions from Caio):
 - use max_length instead of large_buffers.
 - remove UNUSED and use #if GEN_GEN >= 12 instead.
 - inline "buffers" and drop BITSET_RANGE() usage.
 - add assert(n <= max_pointers)
 - move emit to outside of the loop.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

iris: Rework push constants emitting code.

Split into a function the logic to gather the push constant buffers,
which now stores them in struct push_bos. Another function is added to
emit the packet, using data from the push_bos struct.

This will be useful when adding a new function for emitting push
constants for newer platforms.

v2 (Suggestions from Caio):
   - rename 'n' -> 'buffer_count'
   - remove large_buffers (for now)
   - initialize push_bos
   - remove assert
   - change for() condition (i <= 3 -> i < 4)
v3:
   - Add comment about size limit.
   - Rework "shift" logic and 'for' loop.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

intel/blorp: Use 3DSTATE_CONSTANT_ALL to setup push constants.

In blorp, all the push constants are disabled, so we only need to emit a
single 3DSTATE_CONSTANT_ALL with the bitmask for stage update
appropriately set.

v2: Update comment (Caio).

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

intel/aubinator: Decode 3DSTATE_CONSTANT_ALL.

Acked-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel/genxml: Add 3DSTATE_CONSTANT_ALL packet.

Acked-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

turnip: MSAA resolve directly from GMEM

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>

turnip: don't set unused BLIT_DST_INFO bits for GMEM clear

These bits are ignored when clearing so don't bother setting them.

Note: MSAA samples when clearing comes from other registers (tu6_emit_msaa)

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>

turnip: implement CmdClearAttachments

Passes these deqp tests: dEQP-VK.api.image_clearing.core.*attach*single*

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>

turnip: don't skip unused attachments when setting up tiling config

This makes it easier to find the gmem_offset associated with an attachment.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>

lima: enable tiling

Now that we have tiled format modifier merged into linux we can enable tiling.

That should improve overall performance and also workaround broken mipmapping
for linear textures since now we prefer tiled textures.

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

glsl: additional interface redeclaration check for SSO programs

Patch adds additional linker check for SSO programs to make sure they
are redeclaring built-in blocks as required by the desktop spec.

This fixes following Piglit tests:
   arb_separate_shader_objects/linker/pervertex-*

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

gitlab-ci: bump piglit checkout commit

Commit also updates the Piglit quick_gl.txt, list modifications happened
due to following Piglit commits: c248bf201,c acff58ca, 5603e2e60.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

nir/load_store_vectorize: fix combining stores with aliasing loads between

v2: add test

Fixes: ce9205c03bd ('nir: add a load/store vectorization pass')
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev> (v1)
Reviewed-by: Connor Abbott <cwabbott0@gmail.com> (v2)

aco/wave32: Fix reductions.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco/wave32: Allow setting the subgroup ballot size to 64-bit.

Previously, it would only work when the ballot size was set to the
lane mask. This patch makes is possible to set the ballot size
to either 32-bit or 64-bit for wave32 mode.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco/wave32: Use wave_size for barrier intrinsic.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco/wave32: Fix load_local_invocation_index to support wave32.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco/wave32: Use lane mask regclass for exec/vcc.

Currently all usages of exec and vcc are hardcoded to use s2 regclass.
This commit makes it possible to use s1 in wave32 mode and
s2 in wave64 mode.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco/wave32: Add wave size specific opcodes to aco_builder.

Several places in ACO we use SOP1 or SOP2 instructions to operate over the
exec mask or VCC, and these need to be adapted to the new size in wave32
mode.

This commit adds a way to deal with this problem in aco_builder: the caller
can specify a wave size specific opcode and the builder will translate that
to the correct opcode based on the current wave size.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco/wave32: Introduce emit_mbcnt which takes wave size into account.

This is relevant because in wave32 mode the v_mbcnt_hi_u32_b32
instruction is superfluous.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco/wave32: Replace hardcoded numbers in spiller with wave size.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco/wave32: Change uniform bool optimization to work with wave32.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Optimize load_subgroup_id to one bit field extract instruction.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Remove lower_linear_bool_phi, it is not needed anymore.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Remove superfluous argument from emit_boolean_logic.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Fix operand of s_bcnt1_i32_b64 in emit_boolean_reduce.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

gitlab-ci: Run piglit glslparser & quick_shader tests separately

And only use --process-isolation false for the quick_gl tests.

This will hopefully avoid variance in the test results that we've been
seeing lately. But even if it doesn't, it should at least help narrow
down the cause of the variance.

Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

intel/perf: fix improper pointer access

This expression was unused by the macro, probably why it didn't
register in the compilation.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/perf: simplify the processing of OA reports

This is a more accurate description of what happens in processing the
OA reports.

Previously we only had a somewhat difficult to parse state machine
tracking the context ID.

What we really only need to do to decide if the delta between 2
reports (r0 & r1) should be accumulated in the query result is :

   * whether the r0 is tagged with the context ID relevant to us

   * if r0 is not tagged with our context ID and r1 is: does r0 have a
     invalid context id? If not then we're in a case where i915 has
     resubmitted the same context for execution through the execlist
     submission port

v2: Update comment (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/perf: take into account that reports read can be fairly old

If we read the OA reports late enough after the query happens, we can
get a timestamp in the report that is significantly in the past
compared to the start timestamp of the query. The current code must
deal with the wraparound of the timestamp value (every ~6 minute). So
consider that if the difference is greater than half that wraparound
period, we're probably dealing with an old report and make the caller
aware it should read more reports when they're available.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/perf: set read buffer len to 0 to identify empty buffer

We always add an empty buffer in the list when creating the query.
Let's set the len appropriately so that we can recognize it when we
read OA reports up to the end of a query.

We were using an 0 timestamp value associated with the empty buffer
and incorrectly assuming this was a valid value. In turn that led to
not reading enough reports and resulted in deltas added to our counter
values which should have been discarded because those would be flagged
for a different context.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/perf: fix invalid hw_id in query results

Accumulation happens between 2 reports, it can be between a start/end
report from another context. So only consider updating the hw_id of
the results when it's not already valid and that we have a valid value
to put in there.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 41b54b5faf ("i965: move OA accumulation code to intel/perf")
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radeonsi: display cs blit count for AMD_DEBUG=testdma

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: implement sdma for GFX9

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radv/gfx10: fix the vertex order for triangle strips emitted by a GS

My fix wasn't totally correct as pointed out by Marek.
Ported from RadeonSI.

Fixes: deafe4cc587 ("radv/gfx10: fix primitive indices orientation for NGG GS")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: simplify a check in radv_fixup_vertex_input_fetches()

The number of loaded channels should always be > 0 now.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: remove dead shader input/output variables

No pipeline-db changes.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

iris: Stop setting up fake params

In d1c4e64a69e, we added a parameter to tell the back-end compiler to
ignore the param array and just push however many constants you ask it
to push.  Iris doesn't want to push anything so it gives a bogus number
of parameters and trusts the back-end compiler to dead-code all of them.
Now that we can tell the back-end compiler to stop re-arranging things,
delete the hack and enable the new simpler code path.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium/scons: fix graw-xlib build on OSX.

Fixes: 44a6b0107b37 (gallivm: add nir->llvm translation (v2))
Tested-by: Vinson Lee <vlee@freedesktop.org>

llvmpipe: enable texcoord semantics

To make NIR transitioning easier, move the driver to using
texcoord semantics.

Reviewed-by: Eric Anholt <eric@anholt.net>

anv: Respect the always_flush_cache driconf option

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

gallium/swr: Fix crash when use GL_TDFX_texture_compression_FXT1 format.

Reject the new formats in swr to prevent crashes because it doesn't
know how to handle the new formats.

Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>

gitlab-ci: disable junit results for deqp

They don't seem to be hugely useful, and seem to be bogging down gitlab.

Signed-off-by: Rob Clark <robdclark@chromium.org>

anv: Set up SBE_SWIZ properly for gl_Viewport

gl_Viewport is also in the VUE header so we need to whack the read
offset to 0 and emit a default (no overrides) SBE_SWIZ entry in that
case as well.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

gitlab-ci: Update to current ci-templates master

Fixes skopeo copy failures.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac/llvm: fix atomic var operations if source isn't a deref

Fixes some CTS regressions.

Fixes: e61a826f396 ("ac/llvm: fix pointer type for global atomics")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

Add support for T820 CI Jobs

Tomeu: - Small rebase fixups

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

gallivm/llvmpipe: add support for front facing in sysval.

This wires up the front facing value as a sysval, I'd like to
remove the other facing code but I'd need to confirm VMware
don't use it first.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

llvmpipe/images: handle undefined atomic without crashing

just return 0 for unbound atomic operations.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

panfrost: Remove blend shader hack

This is no longer used.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

gitlab-ci: Test Panfrost on T720 GPUs

Now that the Mali T720 GPU is supoprted at the same level as the T760,
test it on PINE64 H64 boards.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

gitlab-ci: Remove non-default skips from Panfrost

During the past months, Panfrost has matured considerably and several
tests stopped being flaky or failing at all.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: White list the Mali T720

Support for this GPU is equal now to that of T760, so whitelist it.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>