package/rpi-firmware: bump for misc fixes and improvements

This fixes a few shortcomings in the boot firmware:
  - emmc pll clock issues
  - audio underruns and chirps
  - unload of sensor drivers (?)
  - missing config.txt no longer borks the boot
  - lockups during long exposures on the camera
  - YUV-to-texture fastpath for the camera

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grub: improve help text with detailed instructions to install grub

These instructions should probaby go in the Buildroot manual, but at
this point, it's not clear in which section they should go. So in
order to not loose those notes, add them to the Grub help text.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grub: add option to configure the list of supported filesystems

Grub can be configured to enable or disable the filesystems supported
in the stage 2. In addition, there are filesystem specific stage
1.5. In order to save space and build time, we provide a new option
that allows to give a space-separated list of filesystems that Grub
should support.

We default to support FAT and ext2, since most of the other
filesystems are fairly unlikely to be used.

We use this option to:

 1) Pass --enable-<fs> or --disable-<fs>, which enables/disables the
    support of <fs> in Grub stage 2.

 2) Install only the stage 1.5 that correspond to the selected
    filesystems.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grub: adjust splashimage in menu.lst depending on configuration

Make the splashimage line in menu.lst only active when splashimage
support has really been enabled in the Grub configuration.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grub: install the sample menu.lst into $(TARGET_DIR)/boot/grub

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grub: sample menu.lst file improvements

Two improvements to the menu.lst file:

 * Do not enforce any video mode, let the kernel use whatever it wants
   as the default, or let the user customize it when needed.

 * Use /dev/sda1 instead of /dev/hda1. Nowadays, most hard disk
   controllers are handled using libata, and therefore the disks are
   visible as /dev/sd<X>.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grub: replace splash screen with a nicer Buildroot splash screen

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grub: support build on x86-64, and misc other improvements

This commit brings a number of improvements to the grub packaging:

 * It builds grub with the host compiler, which is needed so that we
   can build a 32 bits grub even if the target architecture is
   x86-64. To make sure we have a host compiler capable of generating
   32 bits code, grub now selects the BR2_HOSTARCH_NEEDS_IA32_COMPILER
   option. Building with the host compiler is done by cheating and
   passing $(HOST_CONFIGURE_OPTS) in GRUB_CONF_ENV.

 * Some additional CFLAGS are added to make sure grub builds properly
   with modern compilers (-O0, --build-id=none, -fno-stack-protector).

 * Removal of the GRUB_INSTALL_STAGING_CMDS which were not used, since
   GRUB_INSTALL_STAGING was not set to YES.

 * Installation of the "grub" binary in $(HOST_DIR) instead of
   $(TARGET_DIR) since it's actually used only on the host to install
   grub into an image or device.

 * Removal of the grub uninstall commands, since they are generally
   considered useless.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grub: factorize BR2_TARGET_GRUB dependency in Config.in

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: add objcopy and ranlib to HOST_CONFIGURE_OPTS

This commit adds the OBJCOPY and RANLIB variables to
HOST_CONFIGURE_OPTS, since grub legacy will need these defined in
order to build properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: add BR2_HOSTARCH_NEEDS_IA32_COMPILER option

Some bootloaders (such as Grub) need to be built for x86 (i.e IA32)
even if the target architecture is x86-64. However, when the target
architecture is x86-64, the cross-compiler generated by Buildroot is
not able to generate 32 bits code.

To solve this, we will rely on the host compiler being a x86 + x86-64
compiler. Therefore, this commit introduces the
BR2_HOSTARCH_NEEDS_IA32_COMPILER option, which tells the dependency
checking logic to verify that the host compiler is indeed capable of
building x86 32 bits code.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: bump to version 6.8.7-8

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/news.html: add 2013.11 announcement link

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

crda: fix static build failure

libnl-3 uses threads and this isn't accounted for in crda or
libnl-3*.pc files since crda doesn't use pkg-config.

Since linking order matters for static scenarios also throw in -lnl-3
into NLLIBS first since it gets appended to in crda makefiles to add
libnl-3.

libgcrypt depends on libgpg-error and this isn't accounted for in
crda makefile, but it is in libgcrypt-config script (in the correct
order for static linking), so set LDLIBS calling this script.

Fixes:
  http://autobuild.humanoidz.org/results/31c/31c54e16b60f41e2aa9ea6cd43ced694d3ce3ce0/
  http://autobuild.humanoidz.org/results/a45/a4548583aa63fbf6db9dbdf7e1556b0d23800de5/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

strace: disable unsupported nios2 arch

Fixes
http://autobuild.buildroot.net/results/88f330254a83fbc105a74e76df586672d2c369c4/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Merge branch 'next'

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2013.11

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/news.html: announce slides from 'Buildroot: What is new' presentation at ELCE

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnspr: Add patch to support nios2 arch

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus-python: select pyexpat dependency

dbus-python requires xml.parsers.expat, which is provided by the pyexpat
module. This patch enables the pyexpat module as a dependency when dbus-python
is selected.

[Peter: fixup whitespace]
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libiscsi: Call autoreconf to use buildroot's libtool

Use updated libtool from buildroot to fix MIPS64/n64 build problems
http://autobuild.humanoidz.org/results/a9a/a9aa506a591581e413dc38c53d0e56bec5970634/build-end.log

[Peter: add comment explaining why]
Acked-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtool: Apply upstream patch to set correct linkage on MIPS64

This libtool change ensures that ld uses the right machine emulation file,
which will allow to fix several MIPS64 n64 link failures, such as the one
currently visible on the libiscsi package.  Packages affected by this
problem will have to use <pkg>_AUTORECONF = YES to benefit from this libtool
fix, until they are fixed upstream.

Acked-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5: Disable on MIPS64 BigEndian n64 platforms

qt5base fails to compile on MIPS64 BigEndian n64 platforms because there
are multiple calls to some functions that are disabled. Since every Qt5
package depends on qt5base we can disable Qt5 entirely. This is a quick
fix for the next release. In the meantime, a proposed patch to fix this
problem has already been sent to Qt:

https://bugreports.qt-project.org/browse/QTBUG-35228

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

hostapd: fix static build failure

libnl-3 uses threads and this isn't accounted for in hostapd (or
libnl-3*.pc files for that matter - hostapd doesn't use pkg-config
anyway).
Since linking order matters for static scenarios also throw in -lnl-3
into LIBS first since it gets appended to in hostapd makefiles to add
libnl-3.

Fixes:
http://autobuild.buildroot.net/results/d4a/d4a9f44effeb08eda6c4b32764274ae81d185d5e/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tvheadend: remove -Werror from CFLAGS

Remove -Werror from CFLAGS to avoid build failures caused by warnings.

Fixes the following autobuild failure on MIPS64 n32/64:

   http://autobuild.buildroot.net/results/6be/6be075726ac6db0a48dd6b535841ada932c9ffbb/

Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libpfm4: disable on avr32

The perf_event_open syscall is not available on avr32. Fixes build failures
such as the following.

  http://autobuild.buildroot.net/results/38f/38fa81315be448c409b9af29f92621fcf5676f71/

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt: fix build with opengl es

Fixes http://autobuild.buildroot.net/results/efe/efe26c54361094fb1e201da6915900cd9b24d596/

qt doesn't use pkg-config to figure out the needed compiler/linker flags
for egl, so pass them explicitly instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: use ccache if enabled

For now, it doesn't use ccache when compiling host tools (e.g. qmake).
It seems the fix is not trivial.

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lua-ev: disable on avr32 and blackfin

lua-ev is a reverse dependency of libev, but the architecture filtering is
not propagated. Fixes autobuild failure such as the following.

  http://autobuild.buildroot.net/results/387/38704a4362ab6c3458c45603975b274937059fa9/

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ecryptfs-utils: add a dependencies comment

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnspr: Add dependency on !BR2_xtensa and !BR2_bfin

Xtensa is not yet supported in libnspr. Also add dependencies to libnss,
which requires libnspr, and ecryptfs-utils, which requires libnss.

Fixes (xtensa)
http://autobuild.buildroot.net/results/14b/14ba6426edbffa100de924aa69157b3f59368ff2/

Fixes (blackfin)
http://autobuild.buildroot.net/results/dd3/dd353703ed94cec48cd126d80cd2f1b039811be4/

[baruch: fix summary, add autobuild reference, add comment dependency,
 add blackfin]

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: use -device-option to set mkspec variables

Simplify our custom qmake.conf:
  - Include linux_device_{pre,post}.conf to inherit common device
    configuration.
  - Do not add $(STAGING_DIR)/usr/include to include path. It is
    redundant.

In additon to the simplification of code, this change is a preparation
to solve problems occurring when QMAKE_CXX is prepended with ccache path.

Upstream patch is needed by configure to parse device options correctly.
Another upstream patch is needed to remove ARM specific parts from
linux_device_post.conf.

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/qemu_mips64el_malta: add new config

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/qemu_mips64_malta: update config

Slim down the kernel config, switch to ext4 (with ext2/3 support),
enable N32 & O32 ABI compatibility for extra testing goodness and enable
keyboard & mouse support.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain/buildroot: default to eglibc for mips64

uClibc only works well for O32 ABI on mips64, so default to eglibc that
works just fine with N32 & N64 ABIs as well.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grantlee: Disable on non-supported platforms

This package selects BR2_PACKAGE_QT_SCRIPT which is not supported on
certain platforms. To prevent this behaviour we use the same solution as
we applied for BR2_PACKAGE_QT_SCRIPT

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt: Disable QtScript on non-supported platforms

There is no support for certain platforms in QtScript right now, so
buildroot upstream suggested to disable the possibility of enabling
QtScript on those platforms as a quick fix for the 2013.11 release:

   http://lists.busybox.net/pipermail/buildroot/2013-November/083157.html

QtScript doesn't build because it uses JavaScriptCore, so we re-use the
existing BR2_PACKAGE_QT_ARCH_SUPPORTS_WEBKIT option which already lists
which platforms are supported by JavaScriptCore in Qt4.

In addition, a proposed fix to add support for MIPS64 has already been
sent to Qt:

   https://bugreports.qt-project.org/browse/QTBUG-35030

Fixes:

   http://autobuild.buildroot.net/results/fd7/fd7e7e53290f235b540ed5f3c784e2584fdb41e0/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: disable texinfo/documentation

Fixes bug #6554

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mplayer: not available on nios2

Fixes:

  http://autobuild.buildroot.org/results/0ae/0ae3a53a1a6e870ee1bf2a902a400893339777df/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wpa_supplicant: define BINDIR for systemd/dbus service files

BINDIR is used to point systemd/dbus service files to the correct binary
path where wpa_supplicant resides.
So define it to avoid the default /usr/local path that doesn't work.
Solves bug #6704

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lvm2: replace !BR2_PACKAGE_LVM2_DMSETUP_ONLY by BR2_PACKAGE_LVM2_STANDARD_INSTALL

BR2_PACKAGE_LVM2_DMSETUP_ONLY is a "negative" option that disables
build and install of part of the suite. This option cannot be unselected
by other config options, which gives a problem for BR2_PACKAGE_UDISKS_LVM2:
it needs BR2_PACKAGE_LVM2_APP_LIBRARY, which requires the full suite.

Therefore, replace the negative BR2_PACKAGE_LVM2_DMSETUP_ONLY by a positive
BR2_PACKAGE_LVM2_STANDARD_INSTALL. To make sure that existing defconfigs
keep working, the new option defaults to y unless the legacy
BR2_PACKAGE_LVM2_DMSETUP_ONLY was selected.

Fixes http://autobuild.buildroot.net/results/ea4627cae45e972ebba5b33a2b2871ce7f46fedc/

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

util-linux: tweak sscanf-no-ms-as patch

The patch has a minor mistake so fix it.
Credit go to Daniel Mentz <daniel@exxm.de> for the detailed bug report.
Closes bug #6428

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iptables: patch another static linking issue

Fixes:
http://autobuild.buildroot.net/results/e4a/e4a0f93e2abdad0222063b3f71970ee1c5940f3a/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

connman: remove defunkt configuration options

We are carrying support for a couple of configuration options which
are no longer present in connman. Specifically:
; threads: vestigial configuration option needed for defunkt WiMAX plugin
; ntpd: plugin no longer present in connman

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/sparc: drop unused variants

Drop stale v9/ultrasparc/niagara variants.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tcpdump: bump to version 4.5.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libpcap: bump to version 1.5.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: do not allow profiling support on AArch64

The profiling support is not available on AArch64, causing build
failures such as:

  http://autobuild.buildroot.net/results/724f8646e1c2c28cf187f2313244d1e3e61b4c25/

According to Will Newton, function profiling will only be added in the
next version of the AArch64 Linaro toolchain. This indicates it is a
rather new feature in AArch64, so for the moment, just disallow
profiling on AArch64. We can revise this later, when this feature has
been made available in Linaro toolchains, and official gcc releases
(for internal toolchain support).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sam-ba: patch to latest version

Apply the latest Atmel patch for sam-ba version 2.12

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ofono: bump version to 1.13

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

connman: add support for ofono and neard

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

connman: bump version to 1.19

Bump connman to version 1.19; remove a local patch that is no longer
required, the code change having now been made upstream.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

eglibc: add security patch for CVE-2013-4788

http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2013-4788
http://hmarco.org/bugs/CVE-2013-4788.html

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

apr: needs mmu

Uses fork() in apr_proc_fork() which is used by almost all the packages
that use apr (log4cxx, subversion).
apr-util doesn't use fork or apr_proc_fork but it's of no use alone.

[Peter: also hide log4cxx comment if !BR2_USE_MMU]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

apr: fix threading lib detection

apr's configure doesn't try to guess which library is needed for
threading when cross-compiling hence this is never reflected in
apr-1-config, leading to a build failure such as:
http://autobuild.buildroot.net/results/035/035a00de0a56be00559767ba822a396ddc18a9fb/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: fix static linking

pkg-autotools.mk already handles static/shared linking, so no need to
explictly force it. Worse even, the build fails with BR2_PREFER_STATIC_LINK
as we end up calling libtool with --static when it tries to link the .so,
breaking the build:

../ld: attempted static link of dynamic object
`../opcodes/.libs/libopcodes.so'
collect2: error: ld returned 1 exit status

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dropwatch: adjust LDFLAGS

Add more library links into LDFLAGS.
-lncurses because readline uses it (missing _tputs and others).
-lpthread for missing _pthread_rwlock_unlock and others.
-lm for missing _rint.
Fixes:
http://autobuild.buildroot.net/results/6b1/6b1f4f2167d8aca0d73dc0e66fd2e1704c821c61/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tinymembench: Fix typo error on dependence

It should be BR2_MIPS_NABI64 instead of BR_MIPS_NABI64

Fixes:

   http://autobuild.buildroot.net/results/c5d/c5da2d99c09b1a2f7da23f1636f1ccc8978cc4a3/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ruby: security bump to 1.9.3-p484

Fixes CVE-2013-4164.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnss: security bump to version 3.14.5

Fixes CVE-2013-5605.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

quagga: security bump to version 0.99.22.4

Fixes CVE-2013-6051.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2013.11-rc3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus: only install initscript for sysV targets

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iptables: bump to version 1.4.21

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ulogd: bump to version 2.0.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dosfstools: bump to version 3.0.24

Fixes dosfsck on big endian targets.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: fix iconv related build failure

Fix a rare edge build failure when iconv is enabled, easily reproduced
in a debian chroot with an aarch64 external toolchain with iconv +
xmlrpc support enabled with a php cgi + cli target.
Should solve bug #6500.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc-snapshot: enable option UCLIBC_SUSV2_LEGACY

With uClibc commit e8065705, valloc is now optional in SUSv2 and removed
from SUSv3 and later. However, cdrkit currently requires valloc, so
enable it in the uClibc snapshot configuration file.

Fixes
http://autobuild.buildroot.net/results/5a5/5a51f3f06e04eed39d59477ea1178aef7d397754/

Signed-off-by: Chris Zankel <chris@zankel.net>
[baruch: fix summary line, add autobuild reference]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mongoose: wait some time between stop and start of the service

Startup script fails to restart the service: 1s delay is enough to fix
this.

Also apply a minor fix of the script name in the usage string

Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

poco: fix sh4a fenv build failure

Disable FP environment on sh4a. Fixes
http://autobuild.buildroot.net/results/8dc9bca5969d455cc30206fc1ae6e1d3ba6eb6ca/.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sunxi-mali, ti-gfx: add missing dollar sign in egl.pc

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

protobuf-c: disable parallel build

Fixes http://autobuild.buildroot.net/results/f47c4f0883019ba3a8e61a9ae51b7bd7f347b38c/

Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tinymembench: not supported on MIPS n32/64 ABIs

This is a fix for 9883cbd3678be65bdca10a124ba6cb7fd1f008d3. After deeper
testing we have found that package is supported on MIPS64, but only for
o32 ABI.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libglib2: the system PCRE needs to have UTF and UCP enabled

If glib2 is compiled with the system PCRE instead of the included
copy, then that system PCRE needs to have support for UTF-8 and
Unicode properties enabled. Otherwise you will get such warnings
at run-time:

GLib-CRITICAL **: PCRE library is compiled without UTF8 support
GLib-CRITICAL **: PCRE library is compiled without UTF8 properties support

Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pcre: add options to enable UTF and UCP support

Allow to compile PCRE with UTF-8/16/32 support and with
support for Unicode properties.

[Peter: whitespace fix]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mongoose: S85mongoose: fix default options

mongoose fails to start because the options used are not supported by
mongoose. Fix it by using the correct option names instead.

[Peter: reworded commit text and use the correct long options instead]
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

e2fsprogs: Disable elf shared library when BR2_PREFER_STATIC_LIB is selected.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: bump version to 3.10

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nut: add libltdl dependency

libltdl is needed for nut-scanner

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

swig: unbreak host-swig build when host has octave installed

But not the octave development package:

checking for octave... octave
checking for mkoctfile... configure: error: mkoctfile is not installed

We don't need octace support, so fix it by explictly disabling it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jq: switch to official tarball

Ships configure thus fixing the breakage from the automake bump
to version 1.14 with AUTORECONF, with the added bonus of being faster.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beecrypt: unconditionally disable openpm

beecrypt does not properly handle its dependency on openpm, so that
applications using libbeecrypt are not aware that they also need openmp
(libgomp). This causes error messages during linking, such as (rpm):

..-gcc [..] -lbeecrypt  -lbz2 -lz -lpopt -lpthread
libbecrypt.so: undefined reference to `GOMP_sections_end_nowait'
libbecrypt.so: undefined reference to `GOMP_parallel_end'
libbecrypt.so: undefined reference to `GOMP_sections_next'
libbecrypt.so: undefined reference to `GOMP_parallel_sections_start'

Because the openpm dependency of beecrypt is only used by rsa.c, to
parallelize the calculation of RSA cyphers, we can simply disable openmp in
beecrypt instead of trying to fix the way -lgomp is passed.

Fixes http://autobuild.buildroot.net/results/bcf/bcff4b81bfbb1191f97317b0945c74d948c9774b/

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beecrypt: include sequence numbers in patch names

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[ThomasDS: minor change in commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bison: bump to version 3.0.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

automake: bump to version 1.14

Needed for the bison 3.0.1 bump.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpg123: do not disable optimizations

It seems pointless to disable even the default optimizations.
If at all this should be made dependant on the values of the
BR2_OPTIMIZE variables.

Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libglib2: the system PCRE needs to have UTF and UCP enabled

If glib2 is compiled with the system PCRE instead of the included
copy, then that system PCRE needs to have support for UTF-8 and
Unicode properties enabled. Otherwise you will get such warnings
at run-time:

GLib-CRITICAL **: PCRE library is compiled without UTF8 support
GLib-CRITICAL **: PCRE library is compiled without UTF8 properties support

Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pcre: add options to enable UTF and UCP support

Allow to compile PCRE with UTF-8/16/32 support and with
support for Unicode properties.

[Peter: whitespace fix]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fping: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libvncserver: openssl support needs pthreads

Fixes http://autobuild.buildroot.net/results/c30/c3082693fe0da0c54d4bbf950dd6d74e1395c1d9/

Also pass --without-ssl if that isn't the case, as the configure script
otherwise ends up detecting openssl if built before libvncserver.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssl: only build threads configuration if toolchain has pthread support

Gets rid of a large number of warnings (and suboptimal code?):

..sysroot/usr/include/features.h:209:5: warning: #warning requested
reentrant code, but thread support was disabled [-Wcpp]

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

omniorb: needs thread support

Fixes:

   http://autobuild.buildroot.org/results/dfc/dfc083bff04eba68456edd359424293842b6f42d/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tinymembench: package not supported on MIPS64

Fixes:

   http://autobuild.buildroot.net/results/bab/bab68bcf8714f215ac0b0c2546fa06608377fbb0/

This package is only supported on MIPS32 platforms. The mips-32.S file
included in the source code of this package only makes sense to be compiled
for MIPS32, and also contains hardcoded MIPS32 instructions which are
illegal on MIPS64.  Trying to compile this package on a MIPS64 platform will
end with a linkage failure due to undefined references.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcap-ng: disable on avr32 which lacks TLS

libcap-ng needs TLS support, which is not available on avr32.
Also, disable reverse dependencies.

Fixes:
  http://autobuild.buildroot.net/results/73c/73c7c211a51c312bbe4eb6a540f3ad9c92c79ebe/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libroxml: fix avr32 build failure

The -Wno-unused-result option is not understood by the version of gcc used by the
avr32 toolchain. Remove the option from the compilation flags.

Fixes build failures such as the following.

  http://autobuild.buildroot.net/results/e22/e22d94fca3eabb4e54d82af04319f17ad8e10c20/

The single existing patch for libroxml has been renamed to include a numerical
component for application order sorting. The existing patch has also been updated
to apply without fuzz.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libglib2: needs MMU support

Fixes http://autobuild.buildroot.net/results/2e0/2e032c6e44e10f2912935715741c3680a19b9b51/

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ola: disable -Werror

By default, the ola build uses -Werror, so let's pass
--disable-fatal-warnings to remove this and avoid build failures
caused by warnings.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ola: add upstream patch to fix build on AArch64

Fixes:

   http://autobuild.buildroot.org/results/596/5967dfd4bd7c2b68e2911a98b9b84c8fe7adf0aa/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mdadm: needs mmu

Fixes:
http://autobuild.buildroot.net/results/52c/52cc56df2aa278d92141918de74833d7e4fd3d47/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>