configure: Don't special case Cygwin to use gnu99, define _XOPEN_SOURCE instead

Revert "build: Build on Cygwin with gnu99 instead of c99." and define
_XOPEN_SOURCE appropriately.

This reverts commit 53e36d333c9b619c1a5fe9a8d2d08665654b0234.

Since Cygwin 1.7.18 (April 2013), it's headers correctly prototype strtoll()
when using -std=c99, and correctly prototype strdup() when _XOPEN_SOURCE is
defined appropriately, so this workaround is no longer needed.

Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Cc: Vinson Lee <vlee@freedesktop.org>

ilo: fix fence reference counting

The old code was complicated, and was wrong when *ptr is NULL.

i965: Extend compute-to-mrf pass to understand blocks of MOVs

The current compute-to-mrf pass doesn't handle blocks of MOVs.  Shaders
that end with a texture fetch follwed by an fb write are left like this:

0x00000000: pln(8)          g6<1>F          g4<0,1,0>F      g2<8,8,1>F      { align1 WE_normal 1Q compacted };
0x00000008: pln(8)          g7<1>F          g4.4<0,1,0>F    g2<8,8,1>F      { align1 WE_normal 1Q compacted };
0x00000010: send(8)         g2<1>UW         g6<8,8,1>F
                            sampler (1, 0, 0, 1) mlen 2 rlen 4              { align1 WE_normal 1Q };
0x00000020: mov(8)          g113<1>F        g2<8,8,1>F                      { align1 WE_normal 1Q compacted };
0x00000028: mov(8)          g114<1>F        g3<8,8,1>F                      { align1 WE_normal 1Q compacted };
0x00000030: mov(8)          g115<1>F        g4<8,8,1>F                      { align1 WE_normal 1Q compacted };
0x00000038: mov(8)          g116<1>F        g5<8,8,1>F                      { align1 WE_normal 1Q compacted };
0x00000040: sendc(8)        null            g113<8,8,1>F
                            render ( RT write, 0, 4, 12) mlen 4 rlen 0      { align1 WE_normal 1Q EOT };

This patch lets compute-to-mrf recognize blocks of MOVs and match them to
instructions (typically SEND) that writes multiple registers.  With this,
the above shader becomes:

0x00000000: pln(8)          g6<1>F          g4<0,1,0>F      g2<8,8,1>F      { align1 WE_normal 1Q compacted };
0x00000008: pln(8)          g7<1>F          g4.4<0,1,0>F    g2<8,8,1>F      { align1 WE_normal 1Q compacted };
0x00000010: send(8)         g113<1>UW       g6<8,8,1>F
                            sampler (1, 0, 0, 1) mlen 2 rlen 4              { align1 WE_normal 1Q };
0x00000020: sendc(8)        null            g113<8,8,1>F
                            render ( RT write, 0, 20, 12) mlen 4 rlen 0     { align1 WE_normal 1Q EOT };

which is the bulk of the shader db results:

total instructions in shared programs: 987040 -> 986720 (-0.03%)
instructions in affected programs:     844 -> 524 (-37.91%)
GAINED:                                0
LOST:                                  0

The optimization also applies to MRT shaders that write the same
color value to multiple RTs, in which case we can eliminate four MOVs in
a similar fashion.  See fbo-drawbuffers2-blend in piglit for an example.

No measurable performance impact.  No piglit regressions.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>

nvc0/ir: fill offset in properly for TXD

Apparently TXD wants its offset differently than TEX, accepting it in
the upper bits of the layer index. Unclear what happens when this is
combined with indirect sampler indexing.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: use manual TXD when offsets are involved

Something about how we're implementing offsets for TXD is wrong, just
flip to the generic quadop-based implementation in that case.

This is the minimal fix appropriate for backporting.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>

nvc0/ir: do quadops on the right texture coordinates for TXD

handleTEX moves the layer as the first argument. This makes sure that
the quadops deal with the texture coordinates.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>

nv50/ir: ignore bias for samplerCubeShadow on nv50

Unfortunately there's no good way to do this on the nv50 shader isa.
Dropping the bias seems preferable to doing the compare post-filtering.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>

nv50/ir: retrieve shadow compare from first arg

This can only happen with texture(samplerCubeShadow, bias), where the
compare will be in the first argument.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>

docs: Import 10.2.3 release notes

And add a news item.

i965/fs: Disable unlit_centroid_workaround on Haswell.

Although the HSW PRM shows it, the BSpec lists this workaround as being
for Ivybridge only.

total instructions in shared programs: 1994951 -> 1993675 (-0.06%)
instructions in affected programs:     27325 -> 26049 (-4.67%)

i965/vec4: Perform CSE on CMP(N) instructions.

Port of commit b16b3c87 to the vec4 code.

No shader-db improvements, but might as well. The fs backend saw an
improvement because it's scalar and multiple identical CMP instructions
were generated by the SEL peepholes.

i965/vec4: Don't emit null MOVs in CSE.

Port of commit 219b43c6 to the vec4 code.

i965/vec4: Improve CSE performance by expiring some available expressions.

Port of commit 5daf867f to the vec4 code.

i965/vec4: Add basic common subexpression elimination.

[mattst88]: Modified to perform CSE on instructions with
            the same writemask. Offered no improvement before.

total instructions in shared programs: 1995633 -> 1995185 (-0.02%)
instructions in affected programs:     14410 -> 13962 (-3.11%)

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Fix warnings introduced in commit e24ef5ab.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium/radeon: use PRIX64 instead of PRIu64

We want hex values here, not decimals.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

i965: Move assembly annotation functions to intel_asm_annotation.c.

It's C. Compile it as such.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Rename intel_asm_printer -> intel_asm_annotation.

The #ifndef include guards already said the right thing :)

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Make backend_instruction usable from C.

With a hack to place an exec_node in the struct in C to be at the same
location as the inherited exec_node in C++.

Acked-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/cfg: Make cfg_t usable from C.

Acked-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Repack backend_instruction struct.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Make a brw_predicate enum.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Make a brw_conditional_mod enum.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Move common fields into backend_instruction.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Use enum brw_reg_type for register types.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Move is_zero/one/null/accumulator into backend_reg.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Make a common backend_reg class.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Drop imm union from visitor register classes.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Use immediate storage in brw_reg for visitor regs.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

docs: add news item for mesa-demos 8.2.0 release

glsl: Fix merging of layout(invocations) with other qualifiers

If another layout qualifier appeared to the left of `invocations` in the
GS input layout declaration, the invocation count would be dropped on
the floor.

Fixes the piglit tests:

spec/ARB_transform_feedback3/arb_transform_feedback3-ext_interleaved_two_bufs_gs_max
spec/ARB_gpu_shader5/arb_gpu_shader5-invocation-id
spec/ARB_gpu_shader5/compiler/correct-multiple-layout-qualifier-invocations.geom
spec/ARB_gpu_shader5/execution/invocations-conflicting

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

nvc0: add a memory barrier when there are persistent UBOs

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>

nv50: do an explicit flush on draw when there are persistent buffers

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>

nv50: disable dedicated ubo upload method

The hardware allows multiple simultaneous renders with the same
memory-backed constbufs but with each invocation having different
values. However in order for that to work, the data has to be streamed
in via the right constbuf slot. We weren't doing that for UBOs.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.1" <mesa-stable@lists.freedesktop.org>

gallium: rename PIPE_CAP_TGSI_VS_LAYER to also have _VIEWPORT

Now that this cap is used to determine the availability of both, adjust
its name to reflect the new reality.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa/st: enable AMD_vertex_shader_viewport_index

The assumption is that any driver capable of emitting layer from the
vertex shader and supporting viewports should be able to also handle
emitting viewport index from the vertex shader.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Tobias Droste <tdroste@gmx.de>

r600g: allow vs to write to gl_ViewportIndex

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Tobias Droste <tdroste@gmx.de>

svga: Don't unnecessarily reemit BindGBShader commands v2

The Linux winsys can no longer relocate shader code, so avoid
reemitting BindGBShader commands. They are costly.

v2: Correctly handle errors from SVGA3D_BindGBShader()

Reported-by: Michael Banack <banackm@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

radeon/llvm: Allocate space for kernel metadata operands

Previously, we were assuming that kernel metadata nodes only had 1 operand.

Kernels which have attributes can have more than 1, e.g.:
!0 = metadata !{void (i32 addrspace(1)*)* @testKernel, metadata !1}
!1 = metadata !{metadata !"work_group_size_hint", i32 4, i32 1, i32 1}

Attempting to get the kernel without the correct number of attributes led
to memory corruption and luxrays crashing out.

Fixes the cl/program/execute/attributes.cl piglit test.

Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76223
CC: "10.2" <mesa-stable@lists.freedesktop.org>

glsl: fix duplicated layout qualifier detection for GS

This patch fixes the duplicated layout qualifier detection
for geometry shader's layout qualifiers.

Also it makes the detection code more legible by defining
allowed_duplicates_mask variable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80778
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

svga: add switch cases for PIPE_SHADER_CAP_DOUBLES

Signed-off-by: Brian Paul <brianp@vmware.com>

st/xa: Don't close the drm fd on failure v2

If XA fails to initialize with pipe_loader enabled, the pipe_loader's
cleanup function will close the drm file descriptor. That's pretty bad
because the file descriptor will probably be the X server driver's only
connection to drm. Temporarily solve this by dup()'ing the file descriptor
before handing it over to the pipe loader.

This fixes freedesktop.org bugzilla bug #80645.

v2: Fix CC addresses.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

Revert "radeonsi: Use dma_copy when possible for si_blit."

This reverts commit 5d5c20920e0e570742a497aa047e99a2fa3c04f2.

Caused visual corruption, see e.g.
https://bugs.freedesktop.org/show_bug.cgi?id=80827#c1

i965: expose AMD_vertex_shader_viewport_index on gen7+

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>

glsl: add support for AMD_vertex_shader_viewport_index

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Tested-by: Tobias Droste <tdroste@gmx.de>

mesa: add support for AMD_vertex_shader_viewport_index

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Tested-by: Tobias Droste <tdroste@gmx.de>

mesa/st: enable ARB_fragment_layer_viewport

If multiple viewports are supported, that implies the presence of a GS
and layered rendering, so we can enable ARB_fragment_layer_viewport as
well.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

i965/gen6: Add a spec citation about push constant packet requirements.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add a comment about null renderbuffer surfaces and why they exist.

I noticed this when trying to find comments about pull constant buffers.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Update a ton of comments about constant buffers.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Merge VS/GS and WM pull constant buffer upload paths.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/gen6+: Merge VS/GS and WM push constant buffer upload paths.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move dispatch_grf_start_reg and first_curbe_grf into stage_prog_data.

I wanted to access this value from stage-generic code, so stop storing it
under two different names.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Fix state flags for gen4/5 CURBE.

If we had some NOS affecting VS compilation that resulted in optimization
changing the set of constants to be uploaded, we might not have reuploaded
the constants.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Remove a dead define.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Reuse libdrm's header for AUB definitions.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Fix stale comments about the state cache.

This changed in the state streaming work years ago.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Fix stale binding table comment.

I recently moved the code from the mentioned location right into this
file.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Drop the memcmp for finding duplicated CURBE uploads.

At this point, the extra copy of the data and memcmp are as expensive as
just re-uploading.

Note: now that we'll always upload, and brw_constant_buffer watches
BRW_NEW_BATCH anyway, we don't need to explicitly unref the old curbe_bo
at batch reset time.

No significant performance difference on glamor copywinwin10 (n=55),
despite that test having a 98% hit rate on the cache.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Reuse intel_upload.c for gen4/5 constant buffers.

No performance difference on glamor with copywinwin10 (n=40) on my gm45.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium: Add PIPE_SHADER_CAP_DOUBLES

This is for reporting whether or not double precision floating-point
operations are supported.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: Fix not setting build log if the build succeeds v2

If there were only warnings, they would not be added to the log.

v2:
  - Use compat::string.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: Have compat::string allocate its own memory.

gallium/radeon: Only print a message for LLVM diagnostic errors

We were printing messages for all diagnostic types, which was
spamming the console for some OpenCL programs.

radeon/llvm: Use the llvm.rsq.clamped intrinsic for RSQ

Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Laurent Carlier <lordheavym@gmail.com>
https://bugs.freedesktop.org/show_bug.cgi?id=80015

CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>

r600g: allow viewport index/layer to be sent to ps

In order to support ARB_fragment_layer_viewport, we need to explicitly
send these along to the pixel shader, since it has no other way to
retrieve them.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

targets/dri: allow duplicated symbols

With the inclusion of xmlconfig in the loader we're providing dri* symbols
which are already available in libdricommon.la. This leads to a build
break due to the multiple definitions.

Temporary allow multiple definitions, until we come with a better solution.

Reported-by: Laurent Carlier <lordheavym@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

st/dri: Remove the old libdridrm library

With all the hw drivers converted, we can go back to having
a single libdridrm provider.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>

targets/dri-vmwgfx: Convert to static/shared pipe-drivers

Convert the final hardware driver to a single dri provider which
includes all the pipe-drivers.

Update the scons build and drop the unused vmw_powf.c.

Cc: José Fonseca <jfonseca@vmware.com>
Cc: Brian Paul <brianp@vmware.com>
Cc: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>

targets/dri-ilo: Convert to static/shared pipe-driver

Cc: Chia-I Wu <olv@lunarg.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>

targets/dri-i915: Convert to static/shared pipe-drivers

v2:
 - Drop inclusion of the winsys wrapper and softpipe/llvmpipe.
 - Remove old Makefile.am, target.c.
 - Correctly append i915 to the megadrivers list.

Cc: Stephane Marchesin <stephane.marchesin@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>

targets/dri-freedreno: Convert to static/shared pipe-drivers

Now we don't need a second dri module when using kgsl :)

Cc: Rob Clark <robclark@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>

targets/(r300|r600|radeonsi)/dri: Convert to static/shared pipe-drivers

Related to previous commit, merge the separate dri targets to a single
one.

This is essentially all the buildsystem mayhem required for megaradeon.

Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

targets/dri-nouveau: Convert to static/shared pipe-drivers

Similiar to other targets, we'd like to convert all the separate
targets into a single one, thus we'll minimize the duplication and
overall size of mesa. The conversion per API basis, with the drivers
available either statically or shared. Currently the former is the
default.

v2: Correctly append the version script to the linker flags.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>

st/dri/drm: Add a second libdridrm library

Will be used to create the single dri target library, on our
way to convert all the dri targets during the conversion to
to static/shared pipe-drivers.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>

st/dri: Allow separate dri-targets

With this commit we add a couple of DEFINES making the ST code
conditional, in a way that we can use it to gradually convert
the dri-targets from separate libraries into a single one.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>

targets/dri-swrast: use drm aware dricommon when building more than swrast

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>

docs: update hw-dependent bits of ARB_gpu_shader5

Some of the features are completely implemented by core, while others
have hardware dependencies. Create a list of drivers supporting each
sub-feature that must have hw support.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>

nvc0: add missed PIPE_CAP_DRAW_INDIRECT

Real support will be forthcoming. For now, avoid the unknown cap error
and compiler warning.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

llvmpipe: get rid of llvmpipe_get_texture_tile_linear

Because the layout is always linear this didn't really do much any longer -
at some point this triggered per-tile swizzled->linear conversion. The x/y
coords were ignored too.
Apart from triggering conversion, this also invoked alloc_image_data(), which
could only actually trigger mapping of display target resources. So, instead
just call resource_map in the callers (which also gives the ability to unmap
again). Note that mapping/unmapping of display target resources still isn't
really all that clean (map/unmap may be unmatched, and all such mappings use
the same pointer thus usage flags are a lie).

Reviewed-by: Brian Paul <brianp@vmware.com>

llvmpipe: get rid of llvmpipe_get_texture_image

The only caller left used it only for non display target textures,
hence it was really the same as llvmpipe_get_texture_image_address - it
also had a usage flag but this was ignored anyway.

Reviewed-by: Brian Paul <brianp@vmware.com>

llvmpipe: get rid of llvmpipe_get_texture_image_all

Once used for invoking swizzled->linear conversion for all needed images.
But we now have a single allocation for all images in a resource, thus looping
through all slices is rather pointless, conversion doesn't happen neither.
Also simplify the sampling setup code to use the mip_offsets array in the
resource directly - if the (non display target) resource exists its memory
will already be allocated as well.

Reviewed-by: Brian Paul <brianp@vmware.com>

llvmpipe: allocate regular texture memory upfront

The deferred allocation doesn't really make much sense anymore, since we no
longer allocate swizzled/linear memory in chunks and not per level / slice
neither.
This means we could fail resource creation a bit more (could already fail in
theory anyway) but should not fail maps later (right now, callers can't deal
with neither really).

Reviewed-by: Brian Paul <brianp@vmware.com>

llvmpipe: get rid of linear_img struct

Just use a tex_data pointer directly - the description was no longer correct
neither.

Reviewed-by: Brian Paul <brianp@vmware.com>

llvmpipe: (trivial) rename linear_mip_offsets to mip_offsets

Since switching to non-swizzled rendering we only have "normal", aka linear,
offsets.

Reviewed-by: Brian Paul <brianp@vmware.com>

target-helpers: don't use designated initializers

it looks since ce1a1372280d737a1b85279995529206586ae480 they are now included
in more places, in particular even for things buildable with msvc, and hence
those break the build.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

st/mesa: add support for indirect drawing

gallium/u_vbuf: get draw info from an indirect buffer if there's any

This is required for fallbacks to work with ARB_draw_indirect.

gallium: add facilities for indirect drawing

v2:
Added comments to util_draw_indirect, clarified and fixed map size.
Removed unlikely().

gallium: add PIPE_BIND_COMMAND_ARGS_BUFFER

Intended for use with GL_ARB_draw_indirect's DRAW_INDIRECT_BUFFER
target or for D3D11_RESOURCE_MISC_DRAWINDIRECT_ARGS.

xmlconfig/dri: bool -> unsigned char

Drop stdbool, due to the X server being a pain and having
struct members called bool, although I've sent a patch to fix
that we should retain stupidity here. Use unsigned char
which is what GLboolean is anyways.

Signed-off-by: Dave Airlie <airlied@redhat.com>

i965/fs: Update discard jump to preserve uniform loads via sampler.

Commit 17c7ead7 exposed a bug in how uniform loading happens in the
presence of discard.  It manifested itself in an application as
randomly incorrect pixels on the borders of conditional areas.

This is due to how discards jump to the end of the shader incorrectly
for some channels.  The current implementation checks each 2x2
subspan to preserve derivatives.  When uniform loading via samplers
was turned on, it uses a full execution mask, as stated in
lower_uniform_pull_constant_loads(), and only populates four channels
of the destination (see generate_uniform_pull_constant_load_gen7()).
It happens incorrectly when the first subspan has been jumped over.

The series that implemented this optimization was done before the
changes to use samplers for uniform loads.  Uniform sampler loads
use special execution masks and only populate four channels, so we
can't jump over those or corruption ensues.

This fix only jumps to the end of the shader if all relevant channels
are disabled, i.e. all 8 or 16, depending on dispatch.  This
preserves the original GLbenchmark 2.7 speedup noted in commit
beafced2.

It changes the shader assembly accordingly:

before   : (-f0.1.any4h)  halt(8)  17 2  null { align1 WE_all 1Q };
after(8) : (-f0.1.any8h)  halt(8)  17 2  null { align1 WE_all 1Q };
after(16): (-f0.1.any16h) halt(16) 17 2  null { align1 WE_all 1H };

v2: Cleaned up comments and conditional ordering.
v3: Fix typo.

Signed-off-by: Cody Northrop <cody@lunarg.com>
Reviewed-by: Mike Stroyan <mike@lunarg.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79948

i965/fs: Mark case unreachable to silence warning.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Use unreachable() instead of unconditional assert().

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Make unreachable macro take a string argument.

To aid in debugging.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/vec4: Remove useless conditionals.

Setting a couple of bits is the same cost or less as conditionally
setting a couple of bits.

i965/fs: Pass cfg to calculate_live_intervals().

We've often created the CFG immediately before, so use it when
available.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Mark fields in the live interval classes protected.

cfg, for instance, is a pointer to a local variable in
calculate_live_intervals, certainly not valid after that function has
returned.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Remove now unused foreach_list* macros.

foreach_list_typed_const was never used as far as I can tell.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Use typed foreach_in_list_safe instead of foreach_list_safe.

Acked-by: Ian Romanick <ian.d.romanick@intel.com>