package/tzdata: only compile the zoneinfo once

We already compile the zoneinfo once for the host, so there is
no need to recompile it for the target, we can just re-use the
host files.

This has no impact on tz (the uClibc counterpart of tzdata), since
it already made use of the host files anyway.

This means we no longer need to extract the target variant of
tzdata, too.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

replace references to Busybox with BusyBox

The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dillo: new package

[Peter: drop redundant ipv6 handling, whitespace issues]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nut: bump to latest stable

Our patch is still valid, but it now builds fine with // builds
(tested many times with up to 128 // jobs, without failure.)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-firmware: install new Broadcom 43xxx firmware

This installs firmware files for the FullMAC series of Broadcom
WiFi devices.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-firmware: bump version

This bump brings in a new version of the iwlwifi firmware.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: bump kernel used for the RPi

The rpi-3.12.y branch has now been merged with the 3.12.20 upstream,
and contains some fixes for FIQ, v4l2, i2c, USB, and 1-wire GPIOs.

Bump kernel headers used for the toolchain at the same time.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpi-firmware: bump

Yet another bump for the Raspberry Pi firmware:
  - HDMI: EDID override; HDCP fix; add command to control power to HDMI phy;
        fixes to mode selection
  - GPU: enable use of HW cursor; fix for GLES FFT compliance; fix scaling;
        remove arbitrary restrictions on output sizes
  - video-decode: better handle corrupted h264 streams, better allocate memory
  - misc: choose composite video when HDMI is not plugged

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ncurses: enable parallel build

Using a trick taken from gentoo enable parallel build when building for
the target to reduce the build time for my test case from about 54s to
32s on a dual-core laptop.

[Peter: add comment explaining why]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qhull: do not override CMAKE_BUILD_TYPE

This flag is already correctly set by the cmake-package infrastructure.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

flann: do not override CMAKE_BUILD_TYPE

This flag is already correctly set by the cmake-package infrastructure.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

opencv: do not override CMAKE_BUILD_TYPE

This flag is already correctly set by the cmake-package infrastructure.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openpowerlink: do not override CMAKE_BUILD_TYPE

This flag is already correctly set by the cmake-package infrastructure.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-cmake.mk: globally drive the CMAKE_BUILD_TYPE flag using BR2_ENABLE_DEBUG

This CMake flag is usually used to adjust compiler flags (like: -Ox, -g,
etc).

So, it makes sense for Buildroot to globally drive this CMake flags in
the cmake-package infrastructure.

However, if a package prefer overriding this default setting, it still
can via the <PKG>_CONF_OPT variable.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-cmake.mk: globally disable BUILD_TESTING flag

This CMake flag is used to enable tests. It may not disable the test
programs from being built, but it controls the test execution.

Since we don't care about building the tests (and usually disable them
when possible), make sure Buildroot won't try to run them.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-cmake.mk: enable ccache for cmake packages

This patch updates the generated toolchainfile.cmake to use ccache.

When toolchainfile.cmake is used inside Buildroot, using ccache during
the build is driven by a CMake knob: USE_CCACHE, automatically set by
the cmake-package infrastructure and reflecting the BR2_CCACHE value.

Since this toolchainefile.cmake file can be used outside Buildroot, and
this file also set a couple of things (among these: the sysroot cflag,
some pkg-config environment variables), it is important to set the
compiler variables as well to keep the consistency of the
cross-compilation configuration.
So, when it is used outside Buildroot, using ccache for the build is
driven by the ccache program availability.

Note that using ccache for the build is achieved by setting the *_ARG1
CMake variables to let CMake use ccache without failing in detecting
the compiler.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-cmake.mk: do not hardcode absolute path in toolchainfile.cmake

The patch allows sharing or moving the toolchains.

This is a step toward making the toolchain/sdk relocatable.

Closes #6818

[Peter: reword comment as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Uwe Strempel <u.strempel@googlemail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-cmake.mk: refactor the toolchainfile.cmake generation

This patch introduces a toolchainfile.cmake.in template which is filled
by Buildroot.

Using a toolchainfile.cmake.in template file allows to avoid overloading
quoting and/or escaping and it becomes much more similar to the
resulting file.

This patch also cleans up the quoting style.

[Peter: drop stdin redirect as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: switch to gcc 4.8.x as the default compiler version

gcc 4.7.x is going to be retired soon, and now that gcc 4.9.0 is out,
it's time for Buildroot to switch to gcc 4.8.x as the default gcc
compiler version.

See https://gcc.gnu.org/ml/gcc/2014-05/msg00324.html for details about
gcc 4.7.x life cycle.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: Bump version to 5.5.13

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpg123: bump to 1.20.0, providing better optimizations for ARM and AArch64

As suggested by Gustavo, this patch bumps mpg123 to 1.20.0, and
therefore superseds the patch initially provided by Sven Neumann. In
1.20.0, there is a new CPU type arm_fpu, which will compile code for
both VFP and NEON, and choose at runtime which one to use.

Similarly for AArch64, the option --with-cpu=aarch64 will compile both
the NEON and generic decoders, and select at runtime which one to use.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mysql: disable for AVR32

The compiler can't even build it, fixes:
http://autobuild.buildroot.net/results/b5c/b5c3893accc777d717e1d70283437aa626f0aa2d/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: move version handling to Config.in

Like we do elsewhere. No functional change, but nicer and easier to keep in
sync.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: add eglibc 2.19-svnr25243 and choice menu

Add glibc 2.19-svnr25243 and a choice menu to select between different
eglibc versions.
Blacklist it for PowerPC SPE since it doesn't even build.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: drop redundant arch depends

These are already in toolchain/toolchain-buildroot/Config.in and since
package/glibc/Config.in is filtered by BR2_TOOLCHAIN_USES_GLIBC there's
no need to duplicate this.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xapp_xedit: needs MMU

Fixes:
http://autobuild.buildroot.net/results/6b9/6b941b5992c73acd19e8077dbe6cb9fc65e5eba1/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump to version 3.14.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{10,14}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libdvdread: needs dynamic library support

Fixes:

  http://autobuild.buildroot.org/results/0ed/0ed3152a166a69d65a226e3cef755ed370cc245b/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

reenable microblaze little endian for internal musl toolchain

The assumption that musl libc does not support microblaze
little endian mode is wrong. See
http://git.musl-libc.org/cgit/musl/tree/configure line
number 447-448.

Tested with qemu. Just revert previous commit as suggested by
Thomas Petazzoni.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: fix spelling mistakes

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Merge branch 'next'

Conflicts:
package/gdb/Config.in.host

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Kickoff 2014.08 cycle

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/news.html: add 2014.05 announcement link

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2014.05

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Improve tar check if bsdtar is installed

If bsdtar is installed, fix script error for tar version detection.

bsdtar does not provide all expected command line (long) options
like "--hard-dereference". To ensure compatibility, mark version
of tar as 'invalid' and trigger build of 'host-tar'.

[Peter; slightly reworded commit text]
Signed-off-by: Heiko Abraham <abrahamh@web.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual/make-tips.txt: busybox doesn't have a savedefconfig target

So don't mention it here.

Reported-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5webkit: needs host-flex

Fixes http://autobuild.buildroot.net/results/dbe/dbe4e8f7b7ddd8ab3fdc1a6f41d775b3c8132160/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: doesn't build for PowerPC SPE

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/elf2flt: hide when an MMU is used

elf2flt is specifically for cases where an MMU is not available.
There is no point in building elf2flt when using an MMU.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-buildroot: only allow the selection of Musl for Microblaze BE

The Musl C library only supports Microblaze BE, not Microblaze LE, so
this commit adjusts the dependencies of the toolchain-buildroot
package to not allow the selection of Musl on Microblaze LE.

Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: restrict Musl external toolchain to Microblaze BE

As reported by William Welch <bvwelch@gmail.com>, the Musl external
toolchain provided by the musl-cross project is only Microblaze
big-endian. In fact, Musl seems to only support the big endian variant
of the Microblaze architecture, with the microblaze-* tuple.

This commit makes sure the Musl pre-built external toolchain provided
by musl-cross can only be selected for a big-endian Microblaze
configuration.

Reported-by: William Welch <bvwelch@gmail.com>
Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

connman: cleanup Config.in

Reformat help text to fit in menuconfig, slightly tweak wording, strip
trailing spaces and clarify that wpa_supplicant is only a runtime
dependency.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/connman : enable build without gnutls dependency

- add new configuration option '--enable-wispr' (disabled by default)
- move gnutls dependency to "wispr" config option

[Peter: drop gnutls ref for wchar, tweak help text, simplify .mk]
Signed-off-by: Heiko Abraham <abrahamh@web.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnutls: security bump to version 3.2.15

Fixes GNUTLS-SA-2014-3 (CVE-2014-3466).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fontconfig: bump to version 2.11.1

Fixes misinstallation of xfont_font-bh-ttf-1.0.3/42-luxi-mono.conf to
'target@baseconfigdir@/conf.avail/42-luxi-mono.conf'
instead of proper place in the target directory (because of buggy
fontconfig.pc file).

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: Fix BR2_GLOBAL_PATCH_DIR example

As discussed on irc, there is a missing part in the BR2_GLOBAL_PATCH_DIR
    example compared to the ASCII figure under customize-packages section.

Signed-off-by: Sebastien Roy <sebastien.roy@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: stop qt stripping installed libraries

By default the 'make install' step for qt5base will strip all the binaries
and libraries when they are installed to staging. This hinders debugging
as the libraries in staging dir have been stripped and is unnecessary
as buildroot will strip all files on the target

Signed-off-by: Will Wagner <will_wagner@carallon.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

thrift: disable for ARC

thrift uses the __sync_fetch_and_add() atomic primitive that is not available
for ARC.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libfribidi: depend on host-pkgconf

libfribidi needs macros from pkgconf to generate its configure script. Since
commit 5693f236a2a0 (libfribidi: bump version) we AUTORECONF, so host-pkgconf
is also needed.

Fixes:
http://autobuild.buildroot.net/results/5d7/5d76a8333fb05e903460ad51dc0737c18431d033/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysklogd: needs MMU

Fixes:
http://autobuild.buildroot.net/results/bf1/bf1a6e1d4798c5abea4ff5114279329d6d90548f/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

u-boot: use spl/u-boot-spl.bin as default spl file

Ever since u-boot introduced the generic spl support in u-boot 2012.10, the
default spl output file has been spl/u-boot-spl.bin and not u-boot-spl.bin,
so use that as a more sane default value.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libffi: back-port support for ARC

Support for ARC CPUs was added in libffi after 3.0.13 vesion was cut and up
until now no new release has been done. So to enale libffi on ARC we need this
set of patches.

These are corrsponding commits in libffi:
 * b082e15091961373c03d10ed0251f619ebb6ed76 - Add ARC support
 * 0f8690a84c874ec09a090c8c6adfb93c594acac6 - Rebuild for ARC additions
 * d918d47809c174d62283306b282749f8db93661f - arc: Fix build error

The first patch was modified a bit (cut changelog part) to accomodate
changes not related to ARC between 3.0.14 and changes in question.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Misca Jonker <mjonker@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: remove contributor list and add copyright

As discussed on the mailing list [1], remove the limited explicit list of
contributors in favor of the general mention of 'The Buildroot developers'.
Add a copyright statement.
Move the generation info to the front.

[1] http://lists.busybox.net/pipermail/buildroot/2014-May/097589.html

[Peter: remove trailing +, minor rewording]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/exim: security bump

Bump exim to get an urgent security fix.

We should not be impacted, since we're not building with DMARC (where
the flaw is), but better safe than sorry.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs/tar: use qstrip to clean up build output

When using the tar filesystem method, the build output shows at the end:

echo " tar -c""f <br>/output/images/rootfs.tar -C <br>/output/target ." >>
                                    <br>/output/build/_fakeroot.fs

The inner set of quotes can be easily removed by properly stripping the tar
options (coming from the buildroot configuration).

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: permissions/users/device tables: avoid adding empty entries

In pkg-generic.mk, an entry would be added to each of the permissions,
devices and users tables, even if FOO_PERMISSIONS/DEVICES/USERS is empty. In
that last case, the entry would contain only the separator, which is
substituted to '\n' in fs/common.mk.
For configurations with many packages, this would render the build output a
bit odd, containing many \n instances (even though the end result in the
target would of course be the same).

This patch cleans up the build output by only adding to these tables when
the package actually specified contents for them.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2014.05-rc3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fakeroot: drop powerpc64le patch

As suggested by Arnout.

We don't provide fakeroot for the target, and using a powerpcp4le machine as
the build host is quite unlikely - So drop the patch.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dropbear: fix missing directory with systemd

The current SysV startup script create a directory which is necessary
for dropbear to correctly work.
This creation is not done with systemd.

Instead of both init creating the directory, we add the creation of this
directory to the INSTALL_TARGET_CMDS to make sure it's present.

[Peter: use make syntax for TARGET_DIR as pointed out by Thomas]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/exim: fix static linking

Fixes http://autobuild.buildroot.net/results/0a3/0a392087878f80a70435981856455a30152b684d/

When building static, we need to tell exim that it needs to link
statically (obviously), and that it should link against pthreads.

Yet, exim is still not happy with that, as it still wants to build
something (a version-related program) at install time, so we need
to replicate the ld flags at install time.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

monit: uses fork(), disable for nommu

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: explicitize manual license

People reading the Buildroot manual online cannot immediately know what its
license is (unlike reading it from within the source tree). To avoid any
discussion, explicitize this in the manual.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

eudev: bump version

Bump version to v1.6 and drop 2 upstream patches.

Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Acked-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mongoose: provide libmongoose.a static library

The package provides a webserver and, eventually, a library: this is
what Centos, among other distros, is doing.

[Peter: correct install -D invocation]
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5websockets: new package

[Peter: only install *.so.* if !BR2_PREFER_STATIC_LIB]
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5enginio: new package

[Peter: only install *.so.* if !BR2_PREFER_STATIC_LIB]
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5: bump to 5.3.0

Remove upstreamed patches.

See http://qt-project.org/qt5/qt53 for the release information.

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dvb-apps: fix static linking with libiconv

Fixes http://autobuild.buildroot.net/results/4b5/4b56b89dd0ccd3b7e4017782e8d48b9c71207ff7/

Pass the libraries to be linked in LDLIBS instead of LDFLAGS so the end up
after the object files on the linker command line.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: remove remaining 6.6a reference for bfin

Fixes http://autobuild.buildroot.net/results/3e2/3e2b733758651f7a168832de2d3b34afc171609d/

We recently (dfc3cc23af: gdb: switch to 7.x for Blackfin) moved to the
normal 7.x versions for bfin, but Config.in wasn't updated, causing bfin to
still use the old 6.6a variant (but without the uClibc patch) if the
host-gdb isn't selected, breaking the build.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: don't force makeinfo programs for GDB_FROM_GIT variants

Fixes:
http://autobuild.buildroot.net/results/16d/16d4a83eb1e1b9d65641de47f2a2bc5d8ab18bdd/
http://autobuild.buildroot.net/results/df6/df64fe6e834f016267f522f089e00a08b1fd893e/

The GDB_FROM_GIT variants unconditionally use makeinfo, so ensure our
host-texinfo version is used instead of the missing script.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnss: Enable for MIPS64 n32 platforms

After talking with upstream we concluded that MIPS64 n32 is treated as a
32-bit architecture by libnss because it has 32-bit pointers, so
USE_64=1 should not be set in that case.

Upstream bug:
   https://bugzilla.mozilla.org/show_bug.cgi?id=1010730

WRT:
   http://git.buildroot.net/buildroot/commit/?id=73e6ae0fe6a69f88183ae33401f2314088b5f799

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xserver_xorg-server: add support of ARC architecture

Support of ARC was added after 1.15.1 release so until the next official release
happens this patch enables building and execution of Xorg server on ARC.

Upstream commit:
http://cgit.freedesktop.org/xorg/xserver/commit/?id=c08d2b8ccb0158dbf1f529f80cc3236e66236cce

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

powerpc: add powerpc64 and powerpc64le support

This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).

[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

powerpc: remove unneeded dependencies

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

powerpc: add power{4,5,6,7,8} cpus

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

powerpc: mark 32-bit only powerpc cpus to prep for adding powerpc64 support

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

powerpc: add BR2_POWERPC_CPU_HAS_ALTIVEC to replace adhoc deps/checks

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

midori: force host-python dependency for waf build-system

Fixes http://autobuild.buildroot.net/results/d48/d48b68dd6a43fa9a224237e8f458ca8987a3d7b4/

Similar to the recent fix to jack2 (fc8fcec306da). The waf version included
in midori (1.5.19) is not compatible with python 3.4.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

slang: needs mmu

Fixes http://autobuild.buildroot.net/results/dbc/dbce9e591466717d9c87f42b5f192d8fd1be0475/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

powerpc: add BR2_POWERPC_CPU_HAS_SPE to replace adhoc deps/checks

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/binutils: add depends for powerpc64le (only 2.24 works)

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gdb: change default gdb from 7.5 to 7.6

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gdb: add gdb 7.7.x (7.7.1) and 7.6.x (7.6.2)

To prep for powerpc64le, we also disable gdb prior to 7.7.1 on
powerpc64le.

The default gdb on powerpc64le is set to 7.7.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mongoose: bump to version 5.3

Mongoose has changed quite drastically in the last months.
Here is a list of changes which had to be applied:

 - Bump version from 3.7 to 5.3
 - use tarball download via github helper iso git clone
 - need largefile support
 - compilation takes place into "examples"
 - weberver source is now "server.c"
 - adapt to new command line options
 - SSL support now controlled via NS_ENABLE_SSL

[Peter: extend commit text, use CFLAGS_EXTRA, only build server]
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Cc: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python2: Fix disabling module bsddb

Using this minimal defconfig

BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_BERKELEYDB=y

the current code does not prevent the build of

output/build/python-2.7.6/Modules/_bsddb.o

because the module is really called _bsddb,
see python-2.7.6/Modules/_bsddb.c, line 9604.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmicrohttpd: bump to version 0.9.36

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grep: bump to version 2.19

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtasn1: bump to version 3.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

acl: clarify license info

As pointed out by Thomas Petazzoni in his review.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

attr: clarify license info

As pointed out by Thomas Petazzoni in his review.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xproto_dri3proto: New package

This package does not install any binary files, only headers.

[Peter: drop invalid license file]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Add support for powerpc64le

This patch adds support for powerpc64le-linux-gnu.  This includes
needed patches to fakeroot and gmp.

gmp patch is from upstream HG tree.
fakeroot patch is from Ubuntu written by Adam Conrad.

Signed-off-by: Jeff Bailey <jeffbailey@google.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xbmc: Add missing unicode properties supports

At startup, XBMC complains that PCRE is lacking unicode properties
supports.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

hwdata: add license information

Add missing license info and file for package 'hwdata'

[Peter: GPLv2 should be '+' variant, clarify that it is dual licensed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

attr: add license information

Add missing license info and file for package 'attr'

[Peter: change to '+' version of licenses]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

acl: add license information

Add missing license info and file for package 'acl'

[Peter: change to '+' version of licenses]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

website: add alt-tags to images

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

website: fix typos and HTML on support page

Fix a few typos on the support page, and add correct HTML <p> </p> tag
pairs.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

website: remove remaining references to uclibc.org

The website still used some uclibc.org URLs which can now use buildroot.org.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>