git.libre-soc.org Git - gem5.git/log

dev: -Wdeprecated-copy not available on all supported compilers

This option has been introduced in:
1) gcc/9.0 [1]
2) clang/10.0.0 [2]

[1]: https://gcc.gnu.org/gcc-9/changes.html
[2]: https://releases.llvm.org/10.0.0/tools/clang/docs/ReleaseNotes.html

Change-Id: Iee9de40ca462107ec78603ffe5bc0891d6904730
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37795
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: implement the aarch64 ID_ISAR6_EL1 miscregister

This register is used since the Linux kernel 5.6 aarch64 boot.

This register indicates CPU capabilities in aarch32 mode, and it has the
same value as the aarch32 ID_ISAR6 miscregister, which is also added.

The capability values of those registers are analogous to those present in
aarch64 accessible ID_AA64ISAR0_EL1 and ID_AA64ISAR1_EL1, which refer to
aarch64 capabilities however, and were already implemented before this
commit.

The arm architecture document clarifies that reads to this system register
location before it had been defined should return 0, but we were faulting
instead:

> Prior to the introduction of the features described by this register,
this register was unnamed and reserved, RES0 from EL1, EL2, and EL3.

Change-Id: I70e99536dc98925e88233fd4c6887bbcdd5d87dc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30935
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests,misc: Added gem5.fast clang compilation to Kokoro

Compilation issues in Clang and in compiling gem5.fast are normally
only caught during gem5's weekly, intensive, compilation checks:
http://jenkins.gem5.org/job/Compiler-Checks. The purpose of this change
is to have smaller checks on every commit, reducing the chance of
uncompilable code being submitted.

Change-Id: Idd8c6795ff73e21b1814281c31fc7ae39f09dcc5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37478
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

sim: ScopedCheckpointSection to public for mappingParamIn

In clang, the following error was given:

```
In file included from build/X86/sim/eventq.hh:51:
build/X86/sim/serialize.hh:533:19: error: 'ScopedCheckpointSection' is a protected member of 'Serializable'
    Serializable::ScopedCheckpointSection sec(os, sectionName);
                  ^
build/X86/sim/serialize.hh:175:11: note: declared protected here
    class ScopedCheckpointSection {
          ^
```

The use, at line 533, was introduced in this commit:
https://gem5-review.googlesource.com/c/public/gem5/+/36135

This can be fixed by making ScopedCheckpointSection public.

Change-Id: Ib6ffba18d5e8c37980d4febb548f2405cb45ce8c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37915
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache, stats: Stats update for snoop filter

Change-Id: I339bbc4268d5b9501421a2a6a76e5267422c87aa
Signed-off-by: Maryam Babaie <mbabaie@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36355
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

mips: Convert MIPS to use local register index storage.

Change-Id: Ib691f3dd666c0877fc53b2f50dbaaf7bb4a6905b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36880
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sparc: Convert SPARC to use local register index storage.

Once all ISAs are converted, the base StaticInst class will be able to
drop its local arrays, and will no longer need to know what the global
maximum number of source or destination registers is for a given
instruction.

Most of the convertion was very simple and just involved adding tags to
declare and install the register arrays in all the class definitions.
Since SPARC has a relatively simple ISA definition, there weren't many
places that needed to be updated.

The exception was the BlockMem template, which was declaring the microop
classes within the body of the macroop. That was ok when those
declarations didn't need anything other than the name of their parent,
but now they also need to know how big to declare their arrays based on
their actual implementation.

To facilitate that, and to significantly streamline the definition of
the macroop class, the microop class definitions were moved to their own
template, and only the declaration was left in the parent class.

Change-Id: I09e6b1d1041c6a0aeaee63ce5f9a18cf482b6203
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36879
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

x86: Convert X86 to use local reg index storage.

Change-Id: I42bd3e08ebcffe25e2f366be82702b3c04225e92
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36883
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm: Use the common pseudoInst dispatch function.

Instead of manually calling each of the PseudoInst implementations, this
function will automatically pick up new instructions and greatly
simplifies the ARM ISA files.

Change-Id: I6cb94b3d115f50d681ca855f80f9d7d3df6bc470
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27791
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: serialize miscregs as a map

This will prevent checkpoints from breaking on every miscreg addition.

Before this commit, miscregs were stored as an array:

[system.cpu.isa]
miscRegs=965 0 0 0 0 0 0 0 0 0 0 0 17895697 ...

and after this commit they are stored as a map:

[system.cpu.isa]

[system.cpu.isa.miscRegs]
cpsr=965
spsr=0
spsr_fiq=0
spsr_irq=0
spsr_svc=0
spsr_mon=0
spsr_abt=0
spsr_hyp=0
spsr_und=0
elr_hyp=0
fpsid=0
fpscr=0
mvfr1=17895697

JIRA: https://gem5.atlassian.net/browse/GEM5-661
Change-Id: I49999c7206bd9ac1cfb81297d45c8117ff8ae675
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36116
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: create SERIALIZE_MAPPING and UNSERIALIZE_MAPPING

The motivation for those new methods is to prevent checkpoints from
breaking when new map entries are added.

Change-Id: I0ff8681498bcf669492e6b876ad385fda4673d77
JIRA: https://gem5.atlassian.net/browse/GEM5-661
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36135
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Fix cache hits being profiled as cache misses

There are some instances where a cache hit is profiled as a cache
miss. This commit addresses this error.

Change-Id: I7dafa806ef3f1e3717650dc25f8657a0ea741dd1
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37835
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Daniel Gerzhoy <daniel.gerzhoy@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

python: Remove SortedDict from python utilities

The SortedDict isn't actually used. A developer willing to
use a sorted dictionary should resort to the collections.OrderedDict
instead

Change-Id: Ia2cc664eb01e59b197218ccf40ff9c680a410fb2
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37796
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons, python: Remove SmartDict from python utilities

The SmartDict, used by buildEnv, has been added long time ago for
the following reasons: (checking its documentation)

---
The SmartDict class fixes a couple of issues with using the content
of os.environ or similar dicts of strings as Python variables:

1) Undefined variables should return False rather than raising KeyError.

2) String values of 'False', '0', etc., should evaluate to False
(not just the empty string).
---

These are valid reasons, but I believe they should be addressed in
a more standardized way by using a common dictionary.

1) We should simply rely on dict.get

if buildEnv.get('KEY', False/None):

2) We should discourage the use of stringified False or 0.
If we are using a dictionary, can't we just pass those values as
booleans?
The SmartDict is basically converting every value into a
string ("Variable") at every access (__getitem__)
The Variable is a string + some "basic" conversion methods
What is the problem of passing every dict value as a string?

The problem is the ambiguity on the boolean conversion.

If a variable is modelling a boolean, we can return true if
the value is 'yes', 'true'... and false if the value is
'no', 'false' etc. We should raise an exception if it is
something different, like a typo (e.g.) 'Fasle'.
But if the variable is not modelling a boolean, we don't know
how to handle that. How should we convert 'mystring' ?

If we decide to treat 'mystring' as True (which is basically
what a str.__bool__ would return) we will break typoes detection,
as 'Fasle' will now be converted to True, rather than raising
an exception.

Change-Id: I960fbfb1ec0f703e1e372dd752ee75f00632acac
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37775
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Relax commit message checker to allow fixups

Change-Id: I094de0a9cb65af0ba0a8700d77cd51c6537d7beb
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37598
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

util: Use MAINTAINERS.yaml for valid tags in git hook

There is a mismatch between the tags in MAINTAINERS.yaml and the
valid_tags in the git hook. This means if a user consults the
MAINTAINERS.yaml file to find the appropriate tag, there is a chance of
the commit being rejected due to this mismatch. Now that the maintainers
file is in yaml format, use the util/maint library to parse the valid
tag options. Additional meta tags are added (WIP, RFC) and tags that
were previously valid but not in the MAINTAINERS.yaml file.

Change-Id: I3de8f0b6f8507aa1afd2118bc4373ac0610cce40
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37220
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby,misc: Fix a parameter name in a DeprecatedParam message

Change-Id: Ie84a29e779187effea372c6289688f32a1db075d
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36635
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

python: Fix toBool converter

It was using an undefined variable (result) which was mistakenly left
there after its latest refactor

Change-Id: I50bb9b1e7793045556a29306faea5f455b29819d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37755
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim,stats: Update stats style for power_model and thermal_domain

Change-Id: Ie50553c301ff5790b51057dc117568374f0cbe36
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36515
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

mem,stats: Update stats style for mem/probes and mem/qos

Change-Id: I47a094eb8fc56ef998ec3c971dab68ba39b092e3
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36476
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem,stats: Update stats style for FALRU

Change-Id: I67a202eb974a31851fbbce0f15b5377ba726bc1c
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36475
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev,stats: Update stats style for CopyEngine and IdeDisk

Change-Id: Ib757b00864bc144b20adef974e3443ddba2945f0
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36436
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

dev,stats: Update stats style of src/dev/net

Change-Id: I06c41a0506415c7a4f2608668b90d328c2789e61
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36435
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm,stats: Update stats style of src/dev/arm

Change-Id: I722e88801bb8ca0f0d75b5a1bf271fa4d4eded17
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36415
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu,stats: Update stats style for base.hh and base.cc

Change-Id: Ib34dcb294370ea66e3526ab35660d8b50668bebe
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36297
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu-simple,stats: Update stats style

Change-Id: I1e9c7c464f1f7b4b354e9a47c7d974c6806b45da
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36295
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu-o3,stats: Update stats style for mem_dep_unit.hh

Change-Id: I9bd8e9bc331f5d57c1b6320a87b14e9b94465148
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36215
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu-o3,stats: Update stats style for cpu.hh and cpu.cc

Change-Id: If4ddaf6a9a84ea71fa19f5ca6d2e5294ec9a0b23
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36195
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu-o3,stats: Update stats style of inst_queue & inst_queue_impl

Change-Id: I95c2e194e757437fb8c3b3f530bce363e24f9a8e
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36176
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu-o3,stats: Update stats style for iew and iew_impl

Change-Id: Ie213aeb402fee5f015f10c9c03e5b9c02ba1f3fe
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36095
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu-minor,stats: Update stats style of MinorCPU

Change-Id: Id14e6816cc82603459bf68461ae40bf2b63080eb
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36075
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

fastmodel: Replace xrange with range to be python3 compliant

Change-Id: I69ef5d744e2642af95383fbda920464178380757
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37716
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

fastmodel: Use BaseMMU in the CortexR52 wrapper

Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Change-Id: I569dc66a9dad54a374b0864ef2ffabd114aede7b
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37715
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

systemc: Make tlm/gem5 packet conversion flexible

We used to have a hard-coded packet2payload and payload2packet in the
tlm_bridge implementation. However, as the conversion is operated on
generic tlm payload, we're not able to handle information stored in any
user defined SystemC extensions.

In this CL, we add a pair of function to register extra conversion steps
between tlm payload and gem5 packet. This decouples the exact conversion
logic and enables SystemC users to register any necessary steps for
their extensions.

Change-Id: I70b3405395fed0f757f0fb7e19136f47d84ac115
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37075
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Add some format strings to the parser for reg indexes.

There are two new strings, reg_idx_arr_decl which declares the source
and dest register index arrays, and set_reg_idx_arr which installs them
in the base class.

The set_reg_idx_arr code needs to implicitly figure out what type to use
based on the type of the "this" pointer. The name of the containing
class is not *necessarily* the same as class_name, since the generated
code can use that name, something based on that name, or whatever else
it wants. No other format string (other than class_name itself) uses the
class name internally, so we can't count on that working in existing ISA
definitions.

Change-Id: Id995a46896e71a2fcf3103c34a1e1e67e24f88f4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36878
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Add an StaticInst accessor for setting register index storage.

Change-Id: I66adccd8851f035b5d61ace9153ae7acc57403ed
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36877
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu-minor: this is a bug fix for MinorCPU for thread cloning.

Inside the code of cloneFunc(…)  //syscall_emul.hh

    cp->initState();  //line 1483
    p->clone(tc, ctc, cp, flags);  //line 1484
    …
    ctc->clearArchRegs(); //line 1503

    OS::archClone(flags, p, cp, tc, ctc, newStack, tlsPtr); //line 1505
    …

At line 1483, initState() is called and the activateContext() of the
corresponding MinorCPU is eventually called. The actual architecture
clone happens at line 1505 where PC of the new thread could have a
correct value.

In the existing implementation of MinorCPU::activateContext(ThreadID
thread_id), the below line 275 is called
    pipeline->wakeupFetch(thread_id);
to start fetching instruction with current value of PC, which is 0x0,
leading to panic “Page table fault when accessing virtual address 0”.

This is because the OS::archClone() is not yet called. So, the below bug
fix handles the wakeup fetch for a thread for two scenarios:
   ...
    if (!threads[thread_id]->getUseForClone())
    { //the thread is not cloned
        pipeline->wakeupFetch(thread_id);
    } else {//the thread from clone
        if (fetchEventWrapper != NULL)
            delete fetchEventWrapper;
        fetchEventWrapper = new EventFunctionWrapper([this, thread_id]
          {pipeline->wakeupFetch(thread_id);}, "wakeupFetch");
        schedule(*fetchEventWrapper, clockEdge(Cycles(0)));
    }
    ...
If a thread is not cloned, pipeline->wakeupFetch() is called
immediately.
For the cloned thread, the above bug fix delays the execution of
    pipeline->wakeupFetch()
after the OS::archClone is done. ThreadContext::getUseForClone() return
true if a thread is cloned.

A member variable fetchEventWrapper is added to MinorCPU class for
delayed fetch event.

A member variable useForClone and its corresponding get/set methods are
added to ThreadContext class. This approach allows future reuse of this
useForClone variable by other CPU models if needed and also avoid lots
of changes resulted by modifying parameters of activateContext () and
activate() which are defined as override.

Inside the syscall cloneFunc, the useForClone member of a ThreadContext
object is set via its set method right before Process's initState() is
called, shown as below.
    ctc->setUseForClone(true);
    cp->initState();
    p->clone(tc, ctc, cp, flags);

A few previously failed RISC-V ASM tests have been open in tests.py file
after the bug fix works.

JIRA issue: https://gem5.atlassian.net/browse/GEM5-374

Change-Id: Ibffe46522e2617443d29f49df180692c54830f14
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37315
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

x86: Fix object scope in the CPUID code.

The original version of the code takes a pointer from a temporary object
which gets destroyed before the pointer is used.

Change-Id: I16af4eefdf202f769a672e230330d8e0bfce3bb7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37695
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-gcn3,misc: Added missing overrides to gpu_thread.hh

Compiling GCN3 with clang will result in errors within this change.

Change-Id: I05fea6f84f988cb22505281fa24e72d615959f7a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37538
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>

cpu: Access src and dest reg indexes using a pointer to member.

This will eventually let subclasses provide their own appropriately
sized storage for these indexes. By using a pointer to member instead of
a regular pointer, we ensure that even if the StaticInst is copied/moved
somewhere, it will still find its indexes correctly, without any
additional performance overhead or maintenance.

Unfortunately C++ has decided that arrays with known bounds are not
convertible/compatible with arrays with unknown bounds. I've found at
least two standards proposals in various stages of acceptance which say
that that's dumb and they should change that (because it's dumb and they
should change that), but in the mean time we can get everything to
compile by using the reinterpret_cast hammer. While this is
*technically* undefined behavior, it's basically not and should be
pretty safe.

Change-Id: Id747b0cf68d1a0b4809ebb66a32472187110d7d8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36876
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-gcn3, misc: Added missing override to protocol_tester.hh

Clang will return a missing-override error when compiling X86_GCN4
without this change.

Change-Id: Ib5fd9ba5c27ddc15561198bfc90d27b7599a7923
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37537
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-sparc,misc: Added M5_VAR_USED to SparcProcess var

Compiling sparc/gem5.fast fails without specifying this variable is
used.

Change-Id: I86aa5c6495de111421458c2b62200ddb2a89076e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37536
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache,misc: Added missing override to operator

Clang compilation was failing in error due to this missing override.

Change-Id: I92f1774cd2f1f5ef90ab1d72d038f6c65cba70ad
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37535
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

dev: Delete the unused DLAB member in the 8250 UART.

This value is never actually used. The value is computed from the LCR
each time it's needed instead.

Change-Id: I6dc5580eb03174f32b8a381cd2974f742b8eb472
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36817
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev: Convert the IDE controller to use the RegisterBank types.

Also get rid of the "ideConfig" register which does not actually show up
in the spec corresponding to this device's PCI IDs.

Change-Id: Id5d109403f49d956c696371b4d93d26150cc96dc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36816
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-gcn3: Explicitly sign-extend simm16

In some instructions, simm16 needs to be sign extended. Previous code
simply casted the simm16 to a 32-bit or 64-bit datatype, however this
didn't actually sign-extend the value.

This patch explicitly calls sext<16> on simm16 whenever it's supposed
to be sign-extended.

Change-Id: I32f02e51fbab220d1a73dc7e68c7410937db21c7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37495
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Fix deadlock in VIPERCoalescer

Certain instructions (some atomics and buffer_wbinvl1_vol) deadlock
in the coalescer, where sendTimingReq fails, fails a retry, and then
never retries again.

This fix sets m_cache_inv_pkt to null before calling
completeHitCallback(), as that allows the failed packets to be retried
again.

Change-Id: I4a51c741360f385f8b4c3f2a31a9410f18e095d9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37477
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-gcn3: Implement flat_load_sbyte instruction

Change-Id: I3aa7547a393b9ecb4b3d4d107394c54d690a0ac2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37476
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-gcn3: Implement s_setreg_imm32_b32 instruction

Change-Id: I5383243403156dc17d4997106085a62fb0483fec
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37475
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Implementation ARMv8.1 RDMA

Adding RDMA implementation for ARMv8.1
+ isa/formats/*: Adding decoding of Aarch64 and aarch32 instructions
+ isa/insts/neon.isa\neon64.isa: Adding function instructions

Change-Id: I430e8880723f373ffffa50079a87fd4ecc634d86
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36015
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Prevent undefined behavior in not interleaved `AddrRange`s.

If an `AddrRange` is not interleaved, return the input address in
`removeIntlvBits` and `addIntlvBits` to prevent undefined behavior. It
allows to use these methods in all cases without having to check
manually whether the range is interleaved.

Change-Id: Ic6ac8c4e52b09417bc41aa9380a24319c34e0b35
Signed-off-by: Isaac Sánchez Barrera <isaac.sanchez@bsc.es>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37617
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>

fastmodel: Wrap the PL330 DMA controller fast model.

Change-Id: I0290e52ede4dca1252ca224abcc85c2c8086ea3c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37216
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-hsa,gpu-compute: Agent Packet handler implemented.

HSA packet processor will now accept and process agent packets.

Type field in packet is command type.
For now:
AgentCmd::Nop = 0
AgentCmd::Steal = 1

Steal command steals the completion signal for a running kernel.
This enables a benchmark to use hsa primitives to send an agent
packet to steal the signal, then wait on that signal.

Minimal working example to be added in gem5-resources.

Change-Id: I37f8a4b7ea1780b471559aecbf4af1050353b0b1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37015
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: move serialize and unserialize definition to cpp file

Change-Id: I9ac64184d3fe36617f474a714b228b55b9a90976
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36115
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base,cpu,mem: Use templatized SatCounter

Change the deprecated SatCounter instances to the new type-size-
aware SatCounters.

Jira: https://gem5.atlassian.net/browse/GEM5-813

Change-Id: Ie943c553dd8a8c24c80e737783708b033ce001da
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37095
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

base: Templatize SatCounter

Allow SatCounter to have larger unsigned types to accomodate
larger counters.

The template decision was taken because some predictors will
generate huge arrays of small counters, so smaller types will
lessen their overhead; however, isolated counters may require
any counter size.

Jira: https://gem5.atlassian.net/browse/GEM5-813

Change-Id: I5475a565ea7b97d1dfc176fa9d7cf827560fbe39
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37135
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Add support for GRPC protobuf files.

These files are used to generate stubs for calling across GRPC
protocols, an RPC mechanism which is based around the protocol buffer
system.

The support for these files is heavily based on and calls into the
existing protobuf file support, but with the extra step which generates
the additional .grpc.pb.cc and .grpc.pb.h files.

Change-Id: I89022928c08aa9f7ed024b7380ddcc54ca75b55e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37277
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Convert ProtoBuf to use a scons Builder and Scanner.

There are several benefits to using a Builder. First, the action we're
executing is shared between all uses of the Builder. The number of
times this particular builder is called is small, but it should still
be a little more efficient.

Second, we can use SCons's emitter mechanism to generate the .pb.cc and
.pb.h target files in a little more general way.

Also, this change adds a Scanner for .proto files which will scan them
for imports and let SCons manage those implicit dependencies properly.
The scanner is a bit simplistic as described in a comment in the
source, but should work pretty well in practice with reasonably
formatted files, and in particular some files I'm working with that
include imports.

Change-Id: Iaf2498e61133d6f713d6ccaf199422b882c5894f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37276
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Consolidate the ProtoBuf code.

The ProtoBuf support in src/SConscript was split into two parts, one
where the ProtoBuf sources were declared, and the other where scons was
told how to buld the .cc and .hh files and the .cc was added to the
build.

As far as I can tell, there was no real reason to have things split up
like that, at least not currently. This change moves everything into
the ProtoBuf class definition, and this should behave the same as
before but be a little easier to understand and maintain.

Change-Id: I02320f50ece53d90c14b5062bd6b1167210f46c3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37275
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Fix how directories are handled for protobuf files.

There were two issues with how paths were handled for these files.

1. The code in the ProtoBuf class would drop the subdirectory part of
the path name when generating the name of the .cc and .h files the
protoc compiler would output. Since protoc wouldn't generate files
where scons expected, it would fail when it tried to build the .cc.

2. protoc will use the --proto_path and --cpp_out settings to figure
out what path to use for generated files. It will remove the
--proto_path prefix it found the .proto file with from the files path,
and then add the rest to the --cpp_out prefix.

The input files should come from the build directory using symlinks
set up by scons, and the output files should end up alongside them.
That means the --proto_path setting should be the build directory, and
so should --cpp_out. That's fortunately simpler than what was there
before, since it doesn't depend on what the source or targets are.

Change-Id: I69692d2fe3813011982f0c1c9824589a132f93ed
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37218
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Remove "inline" from a method in one of the prefetchers.

The function was defined in a .cc file but marked as inline. gcc seems
to often figure out what it should do, but in clang it doesn't export
the function (since it's marked as inline), and during linking external
references, which don't have a local copy since it's not defined in the
.hh file, will fail.

This failure looks particularly odd because the funciton is virtual,
and so the failure is reported as being unable to compose the vtable
in places where the object is constructed, relatively obscure code
which is generated by the build system and obscured by templates from
an external code base (pybind11).

Change-Id: Ib51aefbf9005e4ca8dfebef32c5def472175f115
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37436
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Override print function of sector and super blocks

Pass management of printing sector and super block's contents to them.

Change-Id: Ided8d404450a0fa39127ac7d2d6578d95691f509
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36582
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Use the compression factor to co-allocate

The compression factor of a block is measured according to the maximum
achievable compression ratio.

For example, if up to 4 blocks can co-allocate in a superblock, and
a cache line has 512 bits, the possible compression factors are 1
(uncompressed, <=512 bits), 2 (compressed, <=256 bits), 4 (compressed,
<=128 bits).

This is an approach similar to the one described in "Yet Another
Compressed Cache", by Sardashti et al.

Change-Id: I52ef36989f3eeef6fc8890132a57f995ef9c5258
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36581
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Set compression bit with its size

When setting the size of a compressed block, its compressibility
needs to be recalculated based on that, so move such functionality
to be done after the block has been inserted, within setSizeBits.

As a side effect, insertBlock does not need to be overridden
anymore.

Change-Id: I608f876cd2110ac5e394ffad5b29941ba458ba91
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36580
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Add data expansion and compaction checking functions

Data expansion and compaction are determined according to the compaction
method being used. Therefore, do the verification on the blocks instead
of the cache.

Change-Id: I652418a5f4c6d5b946a9925d6287a995f262f02a
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36579
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Allow moving data contractions

Data contractions happen when a block passes from a less compressed
(e.g., uncompressed) to a more compressed (e.g., compressed) state.

Some compaction methods enforce that a block can only be allocated
in a location matches an exact compression factor, thus on data
contractions such blocks must be moved to another location, or
they must be padded to fake a bigger size.

For compaction methods that do not have that limitation, performance
can be improved if the contracted block is moved to co-allocate with
another existing entry, since it frees up an entry.

Change-Id: I302bc561b897f9d3ce1426331fe4b5c2df76f4b5
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36578
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Use RP for data expansion victimization

When searching for victims of a data expansion a simple approach to
make room for the expanded block is to evict every co-allocatable
block. This, however, ignores replacement policies and tends to be
inefficient. Besides, some cache compaction policies do not allow
blocks that changed their compression ratio to be allocated in the
same location (e.g., Skewed Compressed Caches), so they must be
moved elsewhere.

The replacement policy approach asks the replacement policy which
block(s) would be the best to evict in order to make room for the
expanded block. The other approach, on the other hand, simply evicts
all co-allocated entries. In the case the replacement policy selects
the superblock of the block being expanded, we must make sure the
latter is not evicted/moved by mistake.

This patch also allows the user to select which approach they would
like to use.

Change-Id: Iae57cf26dac7218c51ff0169a5cfcf3d6f8ea28a
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36577
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Add function to move blocks in the tags

Add a function to allow moving a block's metadata from a source
entry to an invalid destination entry.

Change-Id: I7c8adbcd1133c907f1eea7f69dca983215bc3960
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36576
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Add move assign and delete move constr of blk

Some cache techniques may need to move a block's metadata information
into another block. This must have some limitations to avoid mistakes:
- The destination entry must be invalid, otherwise the replacement
  policy steps would be skipped.
- The source entry must be valid, otherwise there would be no point
  in moving their metadata contents.
- The entries locations (set, way, offset...) must not be moved, since
  they are fixed. The same principle is applied to the location specific
  variables, such as the replacement pointer

Why it would be used:
For example, when using compression, and a block goes from uncompressed
to compressed state due to an overwrite, after the tag lookup
(sequential access) it can be decided whether to store the new data in
the old location, or, since we might have already found the block's co-
allocatable blocks, move it to co-allocate.

Other examples of techniques that could use this functionality are
Skewed Compressed Caches, and ZCaches.

Change-Id: I96e4f8cc8c992c4b01f315251d1a75d51c28692c
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36575
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Updated MAINTAINERS.yaml

Change-Id: Ibda441858a22c9e8bb22e132c165e7724aaf7539
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37356
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm,misc: Added missing override to scmi_platform functions

The missing overrides on the "raiseInterrupt" and "clearInterrupt"
resulted in compilation failures when using Clang.

Change-Id: Ic77e8587cd622f8f0cb819c3230893a1b169a2a2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37355
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Add a library to parse MAINTAINERS.yaml

Add a very simple library to parse MAINTAINERS.yaml. There are
currently no tools that use the library, but it can be tested using
`python3 -m "maint.lib.maintainers"` from within the util directory.

Change-Id: Id2edff94451f27e0b601994d198d0647325e4b35
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37036
Maintainer: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-power: Implement mcrxr

Implement the mcrxr instruction (Move to Condition Register from XER
X-form) as defined on p.132 of the green-cloth book:
The contents of XER<0:3> are copied into the Condition Register field
designated by BF. XER<0:3> are set to zero.

Change-Id: I82ae3d98e1eaf9182e90c0c86afe0f13d4a052e4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37295
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Make the NonCachingSimpleCPU use a back door for fetch.

If the memory system can provide a back door to memory, store that, and
use it for subsequent accesses to the range it covers. For now, this
covers only fetch. That's because fetch will generally happen more than
loads and stores, and because it's relatively simple to implement since
we can ignore atomic operations, etc.

Some limitted benchmarking suggests that this speeds up x86 linux boot
by about 20%, although my modifications to the config to remove caching
(which blocks the back door mechanism) also made gem5 crash, so it's
hard to say for sure if that's a valid result. The crash happened in the
same way before and after, so it's probably at least relatively
representative.

While this gives a pretty substantial performance boost, it will prevent
statistics from being collected at the memory, or on intermediate objects
in the interconnect like the bus. That is to be expected with this
memory mode, however.

Change-Id: I73f73017e454300fd4d61f58462eb4ec719b8d85
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36979
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Update python version for GCN3

The Python version installed in the Dockerfile for GCN3 by apt-get is
too old to build gem5. This bumps the version to the most recent Python
to avoid needing to update this file too much.

Python 3.9 is install via PPA since it is not available in the official
Ubuntu 16.04 repository. Likewise, pip is installed from "source" as it
is not available for Python 3.9 in from neither the PPA nor Ubuntu.

Change-Id: Ia919f31cf9c9063e1df091cea15590526715739b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37219
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Daniel Gerzhoy <daniel.gerzhoy@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Fix `AddrRange::addIntlvBits(Addr)` and new test.

The methods `AddrRange::removeIntlvBits(Addr)` and
`AddrRange::addIntlvBits(Addr)` should be the inverse of one another,
but the latter did not insert the blanks for filling the removed bits in
the correct positions.  Since the masks are ordered increasingly by the
position of the least significant bit of each mask, the lowest bit that
has to be inserted at each iteration is always `intlv_bit`, not needing
to be shifted to the left or right.  The bits that need to be copied
from the input address are `intlv_bit-1..0` at each iteration.

The test `AddrRangeTest.AddRemoveInterleavBitsAcrossRange` has been
updated have masks below bit 12, making the old code not pass the test.
A new `AddrRangeTest.AddRemoveInterleavBitsAcrossContiguousRange` test
has been added to include a case in which the previous code fails.  The
corrected code passes both tests.

This function is not used anywhere other than the tests and the class
`ChannelAddr`.  However, it is needed to efficiently implement
interleaved caches in the classic mode.

Change-Id: I7d626a1f6ecf09a230fc18810d2dad2104d1a865
Signed-off-by: Isaac Sánchez Barrera <isaac.sanchez@bsc.es>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37175
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

tests: Add realview64-kvm.py test to quick regressions

By using the valid_host parameter we can make sure the test is
run on a aarch64 host only

Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Change-Id: I3cdb35967e85377f26adf73ad147cb2479162ca1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31219
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

tests: Add realview64-kvm.py testing platform

Change-Id: If9952563413b4c7462a3ddf46c40358023d5bc60
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31218
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Update guest binaries used by regressions

The new tarball (aarch-system-20200611.tar.bz2) contains the
m5_exit_addr.squashfs.arm64 disk image to be used by KVM regressions

This disk image is based on a memory mapped m5 exit

Change-Id: I23c4a2fa8f969c98dd319cbfa51bca0bcbc9e890
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37177
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-x86, kvm: clean up x86 long regresion kvm code

This commit cleans up the code for x86 kvm long regressions.
Somehow the old version went is as the last patchset.
This is the intended code, which should match the last comments.

Change-Id: I9af02a51ce8ed5098887fb0a6b9240db95227bc3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37120
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-x86: include system syscall header in syscall table files

The getdents syscall is only implemented on hosts that define
SYS_getdents, which is located in <sys/syscall.h>.

That header was missed when splitting the syscall tables into their own
files; this patch adds the header to the syscall table files.

Change-Id: I28d54f6ea2874aa533c89ed7520561e19fe5e5f9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37195
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Specify version of rocm-cmake in gcn3 Dockerfile

This patch updates the gcn3 Dockerfile to use the version of rocm-cmake
that MIOpen specifies in its dev-requirements.txt. This fixes a build
conflict with newer versions of rocm-cmake that require a higher version
of SCons than we have in the Dockerfile.

Change-Id: I70887fd91807b77e5015037830cfe96560ac8a31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37155
Maintainer: Gabe Black <gabe.black@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-x86, cpu-kvm: add x86 kvm test to long regression

revised patch based on reviews

Change-Id: I18d219080ff8ab1c42c9e1a12aadd89606802b25
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34855
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: mike upton <michaelupton@gmail.com>

misc: Convert MAINTAINERS to YAML

Convert MAINTAINERS to YAML and rename it to MAINTAINERS.yaml.

Change-Id: I0965b89e7afceb53f6c2a6a183cc1514f5a9d7a0
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37035
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem,sim: Get the page size from the page table in SE mode.

The page table already knows the size of a page without having to
directly use any ISA specific constants.

Change-Id: I68b575e194697065620a2097d972076886766f74
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34172
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>

cpu: Style fixes in the AtomicSimpleCPU.

Change-Id: I42391e5a75c55022077f1ef78df97c54fa70f198
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36976
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Updated compiler-test.sh for Python3

In our Ubuntu 18.04 Docker Images, we require gem5 to be build using
`/usr/bin/env python3 /usr/bin/scons ...`.

Change-Id: I4dd3bca1602247575769e6c250337c3ee4a40780
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36884
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

util,misc: Altered cpt_upgrader.py shebang to Python3

This script is necessisary for compilation yet is dependent on Python2.
On a pure Python3 system, this results in a compilation failure.

This script works fine with Python3.

Change-Id: Ib1470a76d65455e727041686788c08f385e7251a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36715
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>

mem,scons: Changed assert to panic_if in MessageBuffer

The variable 'm_allow_zero_latency' was only used in an assert message in
`src/mem/ruby/network/MessageBuffer.cc`. This assert is stripped when
compiling to gem5.fast, resulting in the compilation failing with an
unused variable error.

This assert is better as a panic_if, which will not be stripped out
during the .fast compilation.

Change-Id: I5de74982fa42b3291899ddcf73f7140079e1ec3f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36697
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>

mem: Added missing override to cache_blk function

This was causing a compilation warning/error when compiling with clang.

Change-Id: Ic6cf59c002656ba2ab05d8b58766613c289e7db0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36695
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Updated the Dockerfiles for Python3

For the next release of gem5, we are dropping support for Python2. The
Ubuntu 18.04 Docker images were running with Python2. This has been
updated.

It should be noted that there is, at present, no eligant solution to the
issue that older versions of Scons (such as that obtainable via APT in
Ubuntu 18.04) use Python2. Those wishing to compile with these Docker
Images should use
`/usr/bin/env python3 $(which scons) build/X86/gem5.op5`

Change-Id: Ic36ecc7196688daff21af2bb3a76381966f38f60
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36595
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>

mem: Expose the underlyig DRAM or NVM's memory back door.

Use the AbstractMem's new getBackdoor call to implement the
recvAtomicBackdoor call in the memory controller's port.

Change-Id: I10a7d22edb62afc3b77a2d462f297572c04f020d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36978
Maintainer: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Minor refactor of how the abstract mem backdoor is exposed.

Previously the SimpleMem depended on the fact that it inherited from the
AbstractMem in order to access and export it's back door. Now, the
AbstractMem has a method which will set a back door pointer if
appropriate, which the SimpleMem can use, or anything else which uses an
AbstractMem as its backing store.

Also, make the AbstractMem invalidate any existing back doors and refuse
to give out any new ones while some bit of memory is locked. That's
because if the storage is accessed directly, the AbstractMem will have
no change to manage its bookkeeping, and locking won't work properly.

Change-Id: If8c2a63e0827bb88b583f27ab4151d6b761e116e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36977
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>

arch,cpu: Enforce using accessors to get at src/destRegIdx.

There were accessors for reading these indexes, but they were not
consistently used. This change makes them private to StaticInst, and
changes places that were accessing them directly to instead use the
accessors. New accessors are added for code generated by the ISA parser
and some ARM code to set the indexes without accessing them directly.

By forcing these values to be behind accessors, it will be much simpler
to change how those values are stored and retrieved.

Change-Id: Icca80023d7f89e29504fac6b194881f88aedeec2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36875
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-gcn3: Fix operand size reporting for Flat insts

Some Flat instructions were reporting their operand sizes in bits
instead of bytes. This lead to panics occuring in
StaticRegisterManagerPolicy::mapVgpr.

This patch updates those insts to report their operand sizes in bytes.

Change-Id: I48f485e638864a1f2a1a3be66ed20893e73e9705
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36275
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Update maintainers file

Change-Id: I19810801f0acd5a35dde59a70166339e00b97eca
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36886
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Srikant Bharadwaj <srikant.bharadwaj@amd.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-by: ZHENGRONG WANG <seanyukigeek@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: create C declarations for the _addr and _semi m5ops

Symbols such as m5_exit_addr are already present in the libm5.a, but were
not previously exposed in a header. This commit allows external C programs
to use those versions of the functions as well.

Change-Id: I925e3af7bd6cb23e06fb744d453153323afb9310
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36896
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: add update-copyright utility to update copyright on commits

The utility can automatically update copyright for the chosen
organization on all files touched in the selected range of git commits.

Change-Id: I4e1803e53f4530f88fb344f56e08ea29fbfcd41d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35535
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs,tests: Add tokens to GPU VIPER tester

This patch integrates tokens into the VIPER tester by adding a
GMTokenPort to the tester, having the tester acquire tokens for
requests that use tokens, and checking for available tokens
before issuing any requests.

Change-Id: Id317d703e4765dd5fa7de0d16f5eb595aab7096c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35135
Maintainer: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>