board: update and minify at91sam9g20dfc_defconfig

Use modern U-Boot and kernel versions, get rid of the now unused
kernel configuration file since we use the kernel defconfig instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: update and minify at91sam9261ek_defconfig

Use modern U-Boot and kernel versions, and get rid of the useless
kernel configuration file, since we now use the kernel defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: update and minify at91sam9263ek_defconfig

Use modern kernel and U-Boot versions, and get rid of the now useless
kernel configuration file since we use the kernel defconfig file
instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

at91bootstrap: rename config options for consistency

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

at91bootstrap: switch to the official version

The Buildroot makefile was fetching and building the special
AT91Bootstrap of Ulf, which is not the Atmel official version. While
Ulf's variant has a better configuration/build system, the Atmel
version, as officially supported, is probably a better choice for the
future.

The Atmel version only needed a small tweak to work with EABI
toolchains.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

documentation: Update to explain how board support works

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Re-add target/generic/Config.in options to menuconfig

The options to customize the hostname, the banner and the serial port
configuration are now inside a menu named 'System configuration'.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove crazy set of empty directories

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove Busybox skeleton from target/device/Atmel

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove all Config.in/Makefile.in files in target/device

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Stop referencing the crazy target/device stuff

We don't need Config.in and Makefile in target/device: defconfig files
are sufficient to describe the specificities of a board (architecture,
compilation flags, bootloader and kernel details, etc.).

However, a placeholder such as target/device will be kept in order to
host things such as kernel configuration files or various
board-specific patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove mini device table, it isn't used

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Use the new BR2_ROOTFS_SKELETON_CUSTOM options

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Move Config.in.mirrors out of target/device

Having Config.in.mirrors (which also to select various download sites)
inside target/device sounds strange. This commit moves the contents of
Config.in.mirrors directly into the main Config.in file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove useless target/device/mips

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove completely useless set of Makefiles specific to Atmel

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Update defconfigs after Atmel mirror related options removal

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove unused Atmel-specific mirror definitions

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

defconfigs: keep only one defconfig per board

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: #561/#1651/#1735 are resolved

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

l2tp: convert to gentargets and change to xl2tp

l2tp is no longer being developed, and xl2tpd is forked from l2tpd and is
maintained by Xelerance Corporation.

[Peter: remove invalid pppd dependency]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libtheora: bump version to 1.1.1

This allows to disable the build of the format specification
documentation, which was causing issues in cross-compiling mode.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mplayer: convert to gentargets, bump to a recent SVN version

Based on the conversion to gentargets done by Martin Banky, several
issues were fixed, and the mplayer package was improved:

 * Updated to a recent SVN version

 * Removed mandatory dependency on libmad

 * The AVR32 specific patch has been removed. It was a pain to remain
   blocked at the old 1.0-rc2 just for this patch. All this
   optimization work should have been submitted upstream, Buildroot is
   not the place to carry such heavy modifications.

 * Options were added to select whether mplayer and/or mencoder should
   be built/installed.

 * Support for additional options if packages have been selected:
   tremor, libmad, libtheora, libpng, jpeg, xlib_libX11,
   xlib_libXv. More could be added in the future.

 * Support for ARM-related optimization options. Similar improvements
   could be done for x86 and PowerPC architectures.

[Peter: fix build with !IPV6]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libaio: add patch to support AVR32

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netplug: convert to gentargets and bump to 1.2.9.2

Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

alsa-utils: convert to autotargets and bump to 1.0.23

[ Thomas: remove all patches, since they have been merged. Implement
  the target uninstallation step, fix many issues. ]

[Peter: fix target install / uninstall steps]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

hotplug: remove package

The package has been marked deprecated, is no longer developed
upstream, so let's get rid of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libfloat: remove package

This package has been marked deprecated in Buildroot last year, no-one
complained, and it isn't developed upstream anymore. So get rid of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ng-spice-rework: remove package

This package has been marked deprecated in October, and no-one
complained. Moreover, it doesn't sound like a package that is widely
used on embedded systems. So we get rid of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

microcom: remove package

This package has been marked deprecated some time ago, because it has
been integrated into Busybox. Let's get rid of it now.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

memtester: convert to gentargets and bump to 4.2.1

Also, memtester requires largefile support

[ Thomas: add patch to fix memtester's Makefile at installation
  stage. Bump to 4.2.1. ]

Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lvm2: convert to autotargets and bump to 2.02.78

[ Thomas: simplifications and bump to 2.02.78 ]

Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lsof: convert to gentargets and bump to 4.84

lsof is packaged as a tarball inside a .tar.bz2 package, so we have a
post-extract hook to extract the source code tarball, so that for the
next steps, lsof looks like a normal package.

Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target: support generic getty with sysvinit inittabs

In sysvinit inittab the "id" field (first field) must be no longer
than 4 bytes, and is not used by init to determine the output
terminal. Therefore, we adjust the strategy used to modify the inittab
file according to the getty configuration.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sysvint: convert to gentargets and bump to 2.88

Also, changed the site to Debian, to get the latest patches

[ Thomas: add inittab compatible with sysvinit. Minor fixes. ]

Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sysklogd: convert to gentargets and bump to 1.5

Also, changed the site to Debian, to get the latest patches

[ Thomas: Minor fixes. Removed S25sysklogd since our default
  /etc/inittab already starts klogd and sysklogd. ]

[Peter: only install syslog.conf if not available in skeleton]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mrouted: convet to gentargets and bump to version 3.9.4

mrouted is once again being actively developed.
See http://github.com/troglobit/mrouted

[ Thomas: bump to 3.9.4, patches updated, prefix fix. ]

Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mii-diag: convert to gentargets and bump to 2.11.3

[ Thomas: minor fixes. ]

Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

input-tools: fix jscal build, ensure target dir exists

And at the same time only build enabled applets.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

input-tools: convert to gentargets

Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package: pass TARGET_MAKE_ENV at install/clean/uninstall steps

TARGET_MAKE_ENV contains the PATH to the host tools built in
$(HOST_DIR), and not having this directory in the PATH while
installing packages may cause troubles.

The specific example that trigerred the problem is the following
one. libglib2 ./configure tries to find a awk version, either gawk or
mawk. On my limited testing system, only mawk is available, so
normally, libglib2 detects mawk and uses it, and it works perfectly.

However, when host-gawk has been compiled before libglib2 (which
happens for example if you have used the Crosstool-NG backend), gawk
is well detected in $(HOST_DIR)/usr/bin at ./configure time
($(HOST_DIR)/usr/bin is in the PATH at ./configure time, thanks to
TARGET_MAKE_ENV). But at install time, when libglib2 uses gawk, it
doesn't find it anymore because it is not in the PATH.

This also makes things coherent with host installation, in which
$(HOST_MAKE_ENV) was already used.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: more verbose in crosstool-ng backend

By default, Crosstool-NG hides all the details of the toolchain build
process. However, this is inconsistent with the typical Buildroot
build, and the rotating progress thing makes log file resulting from
redirecting the Buildroot output a bit unusable. Therefore, switch the
Crosstool-NG configuration to a more verbose default.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: expose thread options in the Crosstool-NG backend

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: BR2_NEEDS_GETTEXT must be y when uClibc is used

BR2_NEEDS_GETTEXT was already set to y for Buildroot internal
toolchain and external toolchains based on uClibc, but wasn't set for
toolchains based on uClibC built by the Crosstool-NG backend.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gcc: disable libgomp when thread support is disabled

libgomp needs thread support on the target to build properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: check that the thread option selection is correct

When an external toolchain is used, the user is responsible for
telling Buildroot what the configuration of the toolchain is. In order
to make sure that the selection is correct, we already perform checks
against the configuration of the uClibc in the selected external
toolchain. This commit adds the check for thread support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: rework thread options

The selection of linuxthreads, linuxthreads old or NPTL doesn't make a
lot of sense for external toolchains. So, instead, we :

 * Introduce an hidden BR2_TOOLCHAIN_HAS_THREADS option, which must be
   selected by toolchain specific options when thread support is
   available. Package needing to test thread support should use this
   option.

 * Move the none/linuxthreads/linuxthreads old/NPTL selection to
   Buildroot internal toolchain configuration.

 * Add an option in external toolchain to tell if thread support is
   available or not in the external toolchain. We assume that glibc
   without threads is not possible, as Ulrich Drepper said in
   http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html

ffmpeg, dmalloc and openvpn are fixed to use the new
BR2_TOOLCHAIN_HAS_THREADS option. For openvpn, --enable-threads=posix
is no longer used, as the configure script doesn't even understand
this option.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ltp-testsuite: bump version and use autotargets

Reworking ltp-testsuite is needed in order to get rid of some
thread-specific options that will be cleaned-up in the next commit.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: move Stack Protection Support option

The BR2_USE_SSP option is only used inside the uClibc build, so only
meaningful for Buildroot internal toolchains. Therefore, the option is
moved to the right location so that it isn't visible when working with
external toolchains.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: rework C++ options

Instead of having BR2_GCC_CROSS_CXX and BR2_INSTALL_LIBSTDCPP, with
BR2_GCC_CROSS_CXX not being visible (and therefore being useless),
let's just keep BR2_INSTALL_LIBSTDCPP to enable C++ in the toolchain
and install C++ libraries on the target.

We also take that opportunity to make BR2_INSTALL_LIBSTDCPP an hidden
option, which is selected by an option in Buildroot toolchain support
or an option in External toolchain support, just as we did for other
toolchain features.

Some work definitely remains to be done :

 - The name BR2_INSTALL_LIBSTDCPP is ugly, but we keep it for the
   moment in order to avoid changing all packages.

 - We should clarify the other language-related options (Fortran,
   Java, Objective-C, etc.).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: remove toolchain-specific stripping

We already handle the stripping of libraries in $(TARGET_DIR) at the
global level, so there's no need to have toolchain-specific option and
code for this.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: add support for external toolchain profiles and download

Instead of letting the user define all the details of his external
toolchain, we define a set of profiles for well-known external
toolchains (CodeSourcery ones only at the moment, can easily be
extended with other toolchains).

Once a profile has been choosen, the user is offered the choice of
either letting Buildroot download and install the external toolchain,
or (as before) to tell Buildroot where the toolchain is installed on
the system.

We of course provide a "custom profile", through which the user can
configure Buildroot to use a custom external toolchain for which no
profile is available.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: remove ending semi-colon in helpers

Some helpers had their final line ending with a semi-colon, some did
not. For consistency, remove the final semi-colon from all helpers,
it's the responsability of the caller to add the final semi-colon as
needed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: Improve C library option selection

Turn BR2_LARGEFILE, BR2_INET_IPV6, BR2_INET_RPC, BR2_USE_WCHAR,
BR2_ENABLE_LOCALE and BR2_PROGRAM_INVOCATION into hidden options.

Then, for Buildroot toolchains, external toolchains and Crosstool-NG
toolchains, provide visible options that selects the hidden options.

This allows :

 * To show a different label and help text in the case of Buildroot
   toolchain (do you want to enable feature X ?) and in the case of
   external toolchain (is feature X available in your toolchain ?)

 * To not show any option when a glibc external toolchain is selected
   (since glibc is assumed to support all of largefile, IPv6, RPC,
   WCHAR, locale and program invocation) and have them all selected in
   that case.

There is some amount of duplication between Buildroot toolchain config
options and Crosstool-NG toolchain config options, because kconfig
doesn't allow to source the same Config.in file twice (even if under
mutually exclusive conditions). This duplication is more readable that
the hack that consists in splitting files in multiple pieces.

However, this commit changes the name of the options visible in the
configuration interface, so existing .config files will have to be
updated accordingly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: simplify

Old-style kernel headers got removed almost 2 years ago, so get rid of
the seperate kernel-headers-new.makefile file and move the content
to the main kernel-headers.mk.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

strip path when untaring kernel for headers

This is needed when custom/snapshot kernel headers are selected.
Buildroot expects to find dl/linux-2.6.tar.bz2 and also expects
it to extract to output/toolchain/linux-2.6, but if you tar
custom kernel sources directory can be anything, etc. linux-git.
In that case buildroot would extract it to output/toolchain/linux-git.
So fix this behaviour, by using tar strip-directory/component.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New package: fbgrab

FBGrab is a framebuffer screenshot program, capturing the linux
frambuffer and converting it to a png-picture.

[Peter: drop zlib dep, add uninstall]
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

directfb-examples: rework target installation rule to match package infrastructure

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bzip2: ensure target directories exist before copying into

Also simply installation rules a little

[Peter: leave in busybox install fix]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

at: ensure startup script is well installed

In case /etc/init.d does not exist.

[Peter: use install -D]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pango: ensure startup script is well installed

In case /etc/init.d does not exist.

[Peter: use install -D]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdk-pixbuf: ensure startup script is well installed

In case /etc/init.d does not exist.

[Peter: use install -D]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

rsync: avoid using non reevaluated $(TARGET_DIR) in RSYNC_INSTALL_TARGET_OPT

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cups: avoid using non reevaluated $(STAGING_DIR)

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sdl_gfx: avoid using non reevaluated $(STAGING_DIR)

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sdl_sound: avoid using non reevaluated $(STAGING_DIR)

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: move udhcp script from skeleton to package

Since udhcpc is part of busybox, it seems logical to move the udhcpc
script from skeleton to busybox.

[Peter: only install if not available in skeleton]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

udev: ensure startup script is well installed

In case /etc/init.d does not exists.

[Peter: use install -D]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

i2c-tools: ensure binaries are installed in the right place

And remove unneeded explicit stripping of target binaries

[Peter: use install -D]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cloop: ensure target directory exist before copying into

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

hostapd: ensure hostapd binaries are installed in the right place

Ensure hostapd and hostapd_cli are installed in /usr/bin/ even if the
directory does not exist.

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dbus: ensure startup script is well installed

If /etc/init.d does not exist, we need to be sure that the dbus
startup script is installed at the right place.

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdk-pixbuf: fix dependency on libiconv

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

zlib: really fix install for static only builds

Commit ab2f5567c1 (cleanup, fix install for static only build) forgot
to add the patch for static only builds, even though the commit message
mentioned it.

Thanks to Mike for noticing.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: restore DEPMOD usage

The linux.mk rewrite lost the DEPMOD setting while installing modules
which means depending on host-module-init-tools has been useless.
Instead, the build system has been executing /sbin/depmod.

While we're here, drop the INSTALL_MOD_PATH since LINUX26_MAKE_FLAGS
already contains it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libconfig: bump version

[Peter: Don't disable libtool patch]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

openssl: security bump to version 1.0.0c

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: default to 1.18

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: add 1.18.0 runsvdir fix

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: add 1.18.0, remove 1.13.x and 1.14.x, mark 1.15.x as deprecated

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: add shorter shortcuts

We only have one Linux kernel package, and "linux26-" is an anachronism
in today's world.  So add useful "linux-%" shortcuts to the "linux26-%".

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: set a few more initramfs opts for newer kernels

Building with linux-2.6.36 and initramfs support causes the build to
pause while it prompts for newer options (uid/gid/compression).  So
have the build system inject the newer options into the linux config
automatically.  Older versions should just ignore these.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: bump 2.6.32.x / 2.6.36.x stable versions

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

usbutils: bump to version 0.91

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dhrystone: new benchmark package

Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

whetstone: new benchmark package

Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

rsh-redone: new package for rsh/rlogin clients

Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt: only build gui module if enabled

Closes #2905

Signed-off-by: Frederik Pasch <fpasch@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ccache: rework ccache management

 * ccache is now a normal package (both for the host and the target).

 * ccache option is now part of the "Build options" menu. It will
   automatically build ccache for the host before building anything,
   and will use it to cache builds for both host compilations and
   target compilations.

 * bump ccache to 3.1.3

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: drop LDFLAGS override

The current linux code overrides LDFLAGS that the kernel itself might be
setting up. Looking at the history, there doesn't seem to be any reason
for this override. It was added in ea8b1fa6a60705 without any logic.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lsuio: new UIO helper package

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/openssh: Use HTTP instead of FTP for source download

HTTP should be more firewall friendly.

Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Makefile: document savedefconfig in 'make help', like it's done in Linux

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xz: version bump to 5.0.0

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

m4: version bump to 1.4.15

And include patch from OE for building on uClibc targets.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cloop: fix download URL

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

buildroot: kickoff 2011.02 development phase

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

docs/news.html: add 2010.11 announce link

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Update for 2010.11

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Makefile: introduce KSTRIPCMD to strip kernel modules

When sstrip is selected it tries to strip kernel modules too.
Unfortunately this fails with a "unrecognized program segment header
size" error thus interrupting the build process.

We introduce a new $(KSTRIPCMD) strip command for this, being a regular
strip when sstrip is selected and an empty stub when not stripping.

At the same time get rid of the REMOVE_SECTION_* variables, as they are
only used once.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>