aco: Support subvector loops in aco_assembler.

These are currently not used, but could be useful later.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Set GFX10 dimensionality on the instructions that need it.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Use ac_get_sampler_dim, delete duplicate code.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Set GFX10 DLC bit properly.

The DLC bit is now set to 1 for all loads when GLC is also set,
but cleared to 0 for all stores (otherwise it causes issues),
and also cleared to 0 for atomics.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Support GFX10 VOP3 and VOP1 as VOP3 in aco_assembler.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Support GFX10 EXP in aco_assembler.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Fix GFX9 FLAT, SCRATCH, GLOBAL instructions, add GFX10 support.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Support GFX10 MIMG and GFX9 D16 in aco_assembler.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Support GFX10 MTBUF in aco_assembler.

Also remove img_format from aco_ir, since it can be calculated
from dfmt and nfmt. So only the assember needs to deal with it.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Link ACO with amd/common.

We'd like to use some functions, for example some
ac_shader_util functions in ACO, so we need to link
ACO to AC.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

amd/common: Add extern "C" to some headers that were missing it.

We'd like to include some of these in C++ code later.
Specifically, ACO is written in C++ and we would like to use
some of this code in ACO in order to avoid code duplication.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Support GFX10 MUBUF in aco_assembler.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Support GFX10 DS in aco_assembler.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Support GFX10 VINTRP in aco_assembler.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Support GFX10 SMEM in aco_assembler.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Add missing GFX10 specific fields and some README notes.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: Set +wavefrontsize64 for LLVM disassembler in GFX10 wave64 mode.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

v3d: take into account prim_counts_offset

Specifically when reading the primitive counters.

This fixed ~700 CTS tests using this pattern:
dEQP-GLES3.functional.transform_feedback.*

when run after tests like
dEQP-GLES3.functional.prerequisite.read_pixels on the same
caselist. When run individually those tests were passing because
prim_counts_offset was zero.

Fixes: 0f2d1dfe65bfe1ee8f02ce45f100a5508debdfd4 ("v3d: use the GPU to
       record primitives written to transform feedback")

Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

radv: get the device name from radeon_info::name

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

st/mesa: fix R8 bitmap texture for TGSI paths.

The initial patch only fixed up the NIR path, but forgot
the TGSI path needed fixing as well.

Fixes: f92226931b ("st/mesa: Prefer R8 for bitmap textures")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

anv/pipeline: Capture serialized NIR

This allows the serialized NIR to be displayed in RenderDoc and similar
tools.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

clover: Remove unused code

Fixes: 96b592696f1 ("gallium: Require LLVM >= 3.9")
Bug: https://bugs.gentoo.org/685678

clover: use iterator_range in get_kernel_nodes

With libc++ (LLVM's STL implementation), the original code does not compile because an
appropriate vector constructor cannot be found (for the _ForwardIterator one, requirement
is_constructible is not satisfied).

radeonsi: enable MSAA shader images

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: expand FMASK before MSAA image stores are used

Image stores don't use FMASK, so we have to turn it into identity.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: apply FMASK to MSAA image loads

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: clean up image_fetch_rsrc

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: add FMASK slots for shader images (for MSAA images)

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: set the sample index for shader images correctly

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: fix GLSL imageSamples()

We haven't supported MSAA images, so it doesn't matter much.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

tgsi/scan: add tgsi_shader_info::msaa_images_declared

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

nir: add shader_info::last_msaa_image

for radeonsi

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: don't set BO metadata for non-zero planes

pointed out by Bas

radeonsi: ignore metadata for non-zero planes

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeonsi: remove si_vid_join_surfaces and use combined planar allocations

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeonsi: allocate planar multimedia formats in 1 buffer

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

vl: use u_format in vl_video_buffer_formats

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

gallium/u_tests: test NV12 allocation and export

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

gallium/util: add planar format layouts and helpers

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

gallium/util: remove enum numbering from util_format_layout

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

i965: Disable fast clears when running with INTEL_DEBUG=nofc

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

iris: Disable fast clears when running with INTEL_DEBUG=nofc

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

anv: Disable fast clears when running with INTEL_DEBUG=nofc

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

intel: Add INTEL_DEBUG=nofc for disabling fast clears

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

llvmpipe: avoid left-shifting a negative number.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Maya Rashish <coypu@sdf.org>

egl: Include stddef.h in generated source

Required for NULL macro used throughout the generated file.

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

util: fix to detect NetBSD properly

<sys/param.h> is required for NetBSD version detection,
and __NetBSD__ must be used to detect even on older releases.

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

util: simplify BSD includes

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jan Beich <jbeich@FreeBSD.org>

util: detect AltiVec at runtime on BSDs

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jan Beich <jbeich@FreeBSD.org>

util: skip AltiVec detection if built with -maltivec

Helps platforms where runtime detection isn't implemented.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jan Beich <jbeich@FreeBSD.org>

util: detect NEON at runtime on FreeBSD

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jan Beich <jbeich@FreeBSD.org>

util: skip NEON detection if built with -mfpu=neon

Helps platforms where runtime detection isn't implemented.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jan Beich <jbeich@FreeBSD.org>

egl: Make native display detection work more than once

eglGetDisplay is awful because you have to inspect the pointer you're
given and guess what type of native display it corresponds to. We make
it worse by caching the type of the first such display we detect, so if
the second call to eglGetDisplay is to a different display type, kaboom.

Fortunately this is a problem that can be solved with the delete key.

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/156

aco: enable nir_opt_sink

SGPRS: 880272 -> 838936 (-4.70 %)
VGPRS: 705316 -> 680988 (-3.45 %)
Spilled SGPRs: 1032 -> 832 (-19.38 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 252 -> 252 (0.00 %) dwords per thread
Code Size: 55150788 -> 55172436 (0.04 %) bytes
LDS: 451 -> 451 (0.00 %) blocks
Max Waves: 66178 -> 68706 (3.82 %)

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

nir/sink: Don't sink load_ubo to outside of its defining loop

Previously, this could have made the resource divergent in code like
that which is genereated by nir_lower_non_uniform_access.

Fixes: da8ed68a ('nir: replace nir_move_load_const() with nir_opt_sink()')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

nir/sink: Rewrite loop handling logic

Previously, for code like:
loop {
    loop {
        a = load_ubo()
    }
    use(a)
}
adjust_block_for_loops() would return the block before the first loop.
Now we compute the range of allowed blocks and then walk the dominance
tree directly, guaranteeing directly that we always choose a block that
dominates all the uses and is dominated by the definition.

Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

amd: don't use AMD_FAMILY definitions from amdgpu_drm.h

use the ones from addrlib

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

docs: update calendar, add news item, and link release notes for 19.2.1

docs: Add SHA256 sum for 19.2.1

docs: Add relnotes for 19.2.1

aco: move s_andn2_b64 instructions out of the p_discard_if

And use a new p_discard_early_exit instruction. This fixes some cases
where a definition having the same register as an operand causes issues.

v2: rename instruction to p_exit_early_if
v2: modify the existing instruction instead of creating a new one
v3: merge the "i == num - 1" IFs

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: don't reorder instructions in order to lower boolean phis

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>

aco: re-use existing phi instruction when lowering boolean phis

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>

aco: Cleanup insert_before_logical_end

Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>

lima/ppir: don't clone texture loads

Cloning texture loads isn't a good idea since we may move it into
a block that is not shared between all the invocations of the shader.
We'd like to avoid that since it may result in undefined behavior.

Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

gitlab-ci/lava: Add needs: for container image to test jobs

Without this, the test jobs could spuriously run after the container
job failed or was cancelled, even if the build job didn't run at all.

Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

radv: bump minTexelBufferOffsetAlignment to 4

The spec has probably been misinterpreted during RADV bringup.

This fixes GPU hangs with dEQP-VK.binding_model.*offset_nonzero*.

Fixes: f4e499ec791 ("radv: add initial non-conformant radv vulkan driver")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

meta: leak of shader program when decompressing tex-images

CC: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>

mesa/main: prefer R8-textures instead of A8 for glBitmap in display lists

This allows drivers to communicate that they prefer R8 textures rather
than A8 for glBitmap usage.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: Prefer R8 for bitmap textures

If it's not available, we fall back to A8. This should work on all drivers,
because we depend on it in the display-list code already.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

drirc: enable vk_x11_override_min_image_count for DOOM

DOOM fails to handle more images than expected when the adaptative
sync mode is enabled.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1902
Cc: 19.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: implement VK_KHR_shader_clock

NIR->LLVM and ACO already support nir_intrinsic_shader_clock.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

iris: Implement the Broadwell NP Z PMA Stall Fix

This should help avoid stalls in the pixel mask array in certain
non-promoted depth cases.  It especially helps for Z16, as each bit
in the PMA corresponds to two pixels when using Z16, as opposed to
the usual one pixel.

Improves performance in GFXBench5 TRex by 22% (n=1).

docs: Update recently enabled VK extensions on Intel

anv: Enable VK_EXT_shader_subgroup_{ballot,vote}

Anvil now supports and passes Vulkan CTS tests matching

    dEQP-VK.subgroups.*.ext_shader_subgroup_ballot.*
    dEQP-VK.subgroups.*.ext_shader_subgroup_vote.*

and crucible tests matching

    func.shader-ballot.*
    func.shader-subgroup-vote.*

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

st/mesa: Fix inverted polygon stipple condition

Fixes Piglit's gl-2.1-polygon-stipple-fs on iris.

Fixes: 63f24c3c016 ("gallium: Enable MESA_framebuffer_flip_y")
Reviewed-by: Fritz Koenig <frkoenig@google.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

gallium: Enable MESA_framebuffer_flip_y

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

mesa: Allow MESA_framebuffer_flip_y for GLES 3

Implement glFramebufferParameteriMESA on GLES 3 so
that the extension is not dependant on GLES 3.1

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

mesa: GetFramebufferParameteriv spelling

GetFramebufferParameteriv was incorrectly spelled as
GetFramebufferParameteri.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

include/GLES2: Sync GLES2 headers with Khronos

Bring in glFramebufferParameteriMESA/glGetFramebufferParameterivMESA

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

radeonsi: enable zerovram for Rocket League

Fixes corruption on game startup.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1888
Cc: 19.1 19.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

iris: Properly unreference extra VBOs for draw parameters

bound_vertex_buffers doesn't include extra draw parameters buffers.
Tracking this correctly is kind of complicated, and iris_destroy_state
isn't exactly in a hot path, so just loop over all VBO bindings.

Fixes: 4122665dd90 (iris: Enable ARB_shader_draw_parameters support)
Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>

meson: fix sys/mkdev.h detection on Solaris

On Solaris, sys/sysmacros.h has long-deprecated copies of major() & minor()
but not makedev().
sys/mkdev.h has all three and is the preferred choice.

Let's make sure we check for all 3 major(), minor() and makedev().

Reported-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>

include: update drm-uapi

`drm.h` was missing a `#include <stdint.h>`, which was completely
breaking the non-linux builds after 272f9cfe6a19212354c8 ("dri: Use DRM_FORMAT_*
instead of defining our own copy.") started making use of it.

Fixes: 272f9cfe6a19212354c8 ("dri: Use DRM_FORMAT_* instead of defining our own copy.")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/950
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

loader: Simplify handling of the radeonsi driver

The list of AMD/ATI devices supported by radeon/r200/r300/r600 is
complete, so anything else must use radeonsi.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

amd/llvm: Fix warning due to asserted-only variable.

[212/893] Compiling C object 'src/amd/llvm/ce8261c@@amd_common_llvm@sta/ac_nir_to_llvm.c.o'.
../mesa/src/amd/llvm/ac_nir_to_llvm.c: In function ‘visit_image_atomic’:
../mesa/src/amd/llvm/ac_nir_to_llvm.c:2636:17: warning: unused variable ‘format’ [-Wunused-variable]
 2636 |    const GLenum format = nir_intrinsic_format(instr);
      |                 ^~~~~~

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

panfrost: Draw the wallpaper when only depth/stencil bufs are cleared

When only the depth/stencil bufs are cleared, we should make sure the
color content is reloaded into the tile buffers if we want to preserve
their content.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Make sure a clear does not re-use a pre-existing batch

glClear()s are expected to be the first thing GL apps do before drawing
new things. If there's already an existing batch targetting the same
FBO that has draws attached to it, we should make sure the new clear
gets a new batch assigned to guaranteed that the FB content is actually
cleared with the requested color/depth/stencil values.

We create a panfrost_get_fresh_batch_for_fbo() helper for that and
call it from panfrost_clear().

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

iris: Update comment about 3-component formats and buffer textures

You can't render to PIPE_BUFFER so there's no reason to prefer RGBX.
PBO upload would like to use proper RGB textures as source data.

iris: Allow packed RGB pbo uploads

Hitting any fallback path on Broxton as we require clflushing the whole
buffer even for an upload of a subtexture. However, since gallium
provides a pbo upload path, allow it to sample packed RGB if supported.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

anv/android: fix images created with external format support

This fixes a case where user first creates image and then later binds it
with memory created from AHW buffer.

Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

meson: Always add LLVM coroutines module.

It gets used by the gallium auxiliary draw module, which gets used
pretty much always when LLVM is used as JIT.

At the same time most builds don't hit the issue here because the
shared library of LLVM contains all modules.

Fixes: d32690b43c91 ("gallivm: add coroutine pass manager support")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/951
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>

amd: Move all amd/common code that depends on LLVM to amd/llvm.

This commit is a step towards the goal of being able to build RADV
without LLVM. In the future we would like to offer the option to
use RADV solely with ACO. There is still a need for the common AMD
code located in amd/common but the LLVM specific parts need to be
separated.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nvc0: add support for GL_EXT_demote_to_helper_invocation

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

gallium/tgsi: add support for DEMOTE and READ_HELPER opcodes

This mirrors the intrinsics in the GLSL IR. One could imagine an
alternate definition where reading the semantic would account for the
READ_HELPER functionality, but that feels potentially dodgy and could be
subject to CSE unpleasantness.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: use simple_mtx_t instead of mtx_t

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

st/mesa: use simple_mtx_t instead of mtx_t

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium: add PIPE_RESOURCE_FLAG_SINGLE_THREAD_USE to skip util_range lock

u_upload_mgr sets it, so that util_range_add can skip the lock.

The time spent in tc_transfer_flush_region decreases from 0.8% to 0.2%
in torcs on radeonsi.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

util: use simple_mtx_t for util_range

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

winsys/radeon: initialize SIMD properties in radeon_info

This was missed when I added them.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1839
Fixes: 0692ae34e93 ("ac: move ac_get_num_physical_sgprs into radeon_info")
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>