2002-06-18  Chris Demetriou  <cgd@broadcom.com>

* emultempl/mipself.em (mips_elf${ELFSIZE}_check_sections): Check
section flags for SEC_DATA, rather than for SEC_CODE being unset.

2002-06-18  H.J. Lu  (hjl@gnu.org)

* nm.c: Include "elf/common.h".
(extended_symbol_info): Add elfinfo, a pointer to
elf_symbol_type.
(SYM_SIZE): Use elfinfo if it is not NULL.
(get_symbol_type): New function.
(display_archive): Set print_width for each archive member.
(display_file): Likewise.
(display_rel_file): Don't set print_width here.
(print_object_filename_sysv): Handle print_width.
(print_archive_member_sysv): Likewise.
(print_symbols): Pass (bfd_vma) 0 to print_symbol.
(print_symbol): Set the elfinfo field in extended_symbol_info
for ELF.
(print_object_filename_sysv): Fix the output format.
(print_symbol_info_sysv): Print type and section for ELF.

2002-06-18  Elias Athanasopoulos  <eathan@otenet.gr>

* nm.c (print_size_symbols): Remove assignment, which makes
the symbol's size equal to its value when --size-sort is
used.

2002-06-18  Chris Demetriou  <cgd@broadcom.com>

* emultempl/mipself.em (mips_elf${ELFSIZE}_check_sections): Fix
format specifier used to print BFD name.

2002-06-18  Chris Demetriou  <cgd@broadcom.com>

* ld-mips-elf/empic2-ref.s: Add a missing .end, apparently
turned up by recent assembler changes.

Add entry describing a change to alpha-tdep.c (heuristic_proc_desc).

    * alpha-tdep.c (heuristic_proc_desc): Compute the size of the
        current frame using only the first stack size adjustment. All
        subsequent size adjustments are not considered to be part of
        the "static" part of the current frame.
        Compute the address of the saved registers relative to the
        Frame Pointer ($fp) instead of the Stack Pointer if $fp is
        in use in this frame.

*** empty log message ***

daily update

2002-06-18  Don Howard  <dhoward@redhat.com>

        * valops.c (value_ind): Use value_at_lazy() when dereferencing
        type int expressions.  Thanks to Jim Blandy <jimb@redhat.com> for
        suggesting this solution.

* config/romp/xm-rtbsd.h: Delete file.
* config/romp/rtbsd.mh: Delete file.

2002-06-18  Chris Demetriou  <cgd@broadcom.com>

        * mdmx.c (SD_): Delete.
        (Unpredictable): Re-define, for now, to directly invoke
        unpredictable_action().
        (mdmx_acc_op): Fix error in .ob immediate handling.

    * breakpoint.c (condition_command): Post breakpoint_modify
        when a condition is added to an existing breakpoint.
        (commands_command): Likewise for commands.
        (set_ignore_count): Likewise for ignore counts.
        If no tty, do not simply return, still need to send event
        notification.
        (ignore_command): Only print a newline if the command came
        from a tty.
        Don't call breakpoints_changed, since this is now properly
        handled by set_ignore_count.

2002-06-18  Dave Brolley  <brolley@redhat.com>

* configure.in: Add support for frv.
* config.sub: Add support for frv.

* interp.c (sim_firmware_command): Initialize `address'.

2002-06-18  Dave Brolley  <brolley@redhat.com>

* po/POTFILES.in: Add frv-*.[ch].
* disassemble.c (ARCH_frv): New macro.
(disassembler): Handle bfd_arch_frv.
* configure.in: Support frv_bfd_arch.
* Makefile.am (HFILES): Add frv-*.h.
(CFILES): Add frv-*.c
(ALL_MACHINES): Add frv-*.lo.
(CLEANFILES): Add stamp-frv.
(FRV_DEPS): New variable.
(stamp-frv): New target.
(frv-asm.lo): New target.
(frv-desc.lo): New target.
(frv-dis.lo): New target.
(frv-ibld.lo): New target.
(frv-opc.lo): New target.
(frv-*.[ch]): New files.

2002-06-18  Dave Brolley  <brolley@redhat.com>

From Catherine Moore, Michael Meissner, Jim Blandy:
* emulparams/elf32frv.sh: New file.
* configure.tgt: Support frv-*-*.
* Makefile.am (ALL_EMULATIONS): Add eelf32frv.o.
(eelf32frv.c): New target.

2002-06-18  Dave Brolley  <brolley@redhat.com>

From Catherine Moore:
* dis-asm.h (print_insn_frv): New prototype.

2002-06-18  Dave Brolley  <brolley@redhat.com>

From Catherine Moore, Michael Meissner, Dave Brolley:
* common.h (EM_CYGNUS_FRV): New macro.
* frv.h: New file.

2002-06-18  Dave Brolley  <brolley@redhat.com>

From Catherine Moore, Michael Meissner, Richard Sandiford, Dave Brolley:
* po/POTFILES.in: Add tc-frv.c, tc-frv.h.
* configure.in: Support frv-*-*.
* Makefile.am (CPU_TYPES): Add frv.
(TARGET_CPU_CFILES): Add tc-frv.c.
(TARGET_CPU_HFILES): Add tc-frv.h.
(DEPTC_frv_coff): New variable.
(DEPTC_frv_elf): New variable.
(DEPOBJ_frv_coff): New variable.
(DEPOBJ_frv_elf): New variable.
(DEP_frv_coff): New variable.
(DEP_frv_elf): New variable.
* tc-frv.c: New file.
* tc-frv.h: New file.

2002-06-18  Dave Brolley  <brolley@redhat.com>

* gas/frv: New testsuite.

2002-06-18  Dave Brolley  <brolley@redhat.com>

From Catherine Moore:
* readelf.c (elf/frv.h): #include it.
(guess_is_rela): Support EM_CYGNUS_FRV.
(dump_relocations): Ditto.
(get_machine_name): Ditto.
* Makefile.am (readelf.o): add dependency on $(INCDIR)/elf/frv.h.

2002-06-18  Dave Brolley  <brolley@redhat.com>

From Catherine Moore, Michael Meissner, Dave Brolley:
* po/SRC-POTFILES.in: Add cpu-frv.c and elf32-frv.c
* targets.c: Support bfd_elf32_frv_vec.
* reloc.c: Add FRV relocs.
* configure.in: Add support for bfd-elf32-frv-vec.
* config.bfd (targ_cpu): Add support for frv-*-elf.
* archures.c: Add frv arch and machines.
* Makefile.am (ALL_MACHINES): Add cpu-frv.lo.
(ALL_MACHINES_CFILES): Add cpu-frv.c.
(BFD32_BACKENDS): Add elf32-frv.lo.
(BFD32_BACKENDS_CFILES): Add elf32-frv.c
(cpu-frv.lo): New target.
(elf32-frv.lo): New target.
* cpu-frv.c: New file.
* elf32-frv.c: New file.

2002-06-18  Dave Brolley  <brolley@redhat.com>

* configure.in: Add support for frv.
* config.sub: Add support for frv.

* Makefile.am (CGENDEPS): Remove unnecessary stamp-cgen.
* Makefile.in: Regenerate.

* MAINTAINERS: Note that cris-elf target can be compiled with
-Werror.
* cris-tdep.c (cris_register_name): Make return type constant.
(cris_breakpoint_from_pc): Ditto.

* interp.c (sim_resume): Fix setting of bus error for
instruction fetch.

binutils/
* readelf.c (get_file_header): Only read the first section header if
e_shoff is non-zero.

bfd/
* elfcode.h (elf_object_p): Sanity check eh_shoff == 0 implies
e_shnum == 0.
Only read the first section header if e_shoff is non-zero.
Don't consider e_shstrndx if there are no sections.

2002-06-18  Michal Ludvig  <mludvig@suse.cz>

* frame.h (struct frame_info): Change type of context to
'struct context'.

merge from gcc

* config/obj-elf.h (TARGET_SYMBOL_FIELDS): Conditionally define.

*** empty log message ***

daily update

* hw-events.c (hw_event_queue_schedule): Initialize `dummy'.

* d10v_sim.h (SET_PSW_BIT): Add cast to avoid inverting an enum.

* gdbarch.sh (REGISTER_NAME): Change return type a constant string
pointer.
* gdbarch.h, gdbarch.c: Regenerate.
* config/mips/tm-mips.h (mips_register_name): Update.
* i386-tdep.h (i386_register_name): Update.
* mips-tdep.c (mips_register_name): Update
* alpha-tdep.c (alpha_register_name): Update.
* arch-utils.c (legacy_register_name): Update.
* arch-utils.h (legacy_register_name): Update.
* avr-tdep.c (avr_register_name): Update.
* ia64-tdep.c (ia64_register_name): Update.
* i386-tdep.c (i386_register_name): Update.
* sparc-tdep.c (sparc32_register_name): Update.
(sparc64_register_name): Update.
(sparclite_register_name): Update.
(sparclet_register_name):
* sh-tdep.c (sh_generic_register_name): Update.
(sh_sh_register_name): Update.
(sh_sh3_register_name): Update.
(sh_sh3e_register_name): Update.
(sh_sh_dsp_register_name): Update.
(sh_sh3_dsp_register_name): Update.
(sh_sh4_register_name): Update.
(sh_sh64_register_name): Update.
* s390-tdep.c (s390_register_name): Update.
* rs6000-tdep.c (rs6000_register_name): Update.
* ns32k-tdep.c (ns32k_register_name_32082): Update.
(ns32k_register_name_32382): Update.
* d10v-tdep.c (d10v_ts2_register_name): Update.
(d10v_ts3_register_name): Update.
* xstormy16-tdep.c (xstormy16_register_name): Update.
* vax-tdep.c (vax_register_name): Update.
* v850-tdep.c (v850_register_name): Update.
* m68hc11-tdep.c (m68hc11_register_name): Update.
* mn10300-tdep.c (mn10300_generic_register_name): Update.
(am33_register_name): Update.

* simops.c (trace_result): Fix printf formatting.

Indented m68k-tdep.c using gdb_indent.sh

* sim-memopt.c: Include <unistd.h>.
(do_memopt_add): Fix printf format.
* sim-events.c (sim_events_schedule): Initialize ``dummy''.

* gen.c (gen_entry_expand_opcode): Initialize ``value'' to -1 and
``t'' to NULL.
* igen.c (main): Add default case to switch.
* gen-icache.c (print_icache_extraction): Ditto.

Indented file using gdb_indent.sh.

* Makefile.in (BUILD_CFLAGS): Remove -O0.

2002-06-17  Elena Zannoni  <ezannoni@redhat.com>

* psim.c (psim_options): Don't choke when gdb invokes us with
the --architecture option, just ignore it.

* gdb_indent.sh: Add prgregset_t, fpregset_t, and gregset_t to the
list of predefined types.

    * gdbmi.texinfo: Update command examples with real MI behavior.

* config/tc-sh.c (assemble_ppi): Initialize reg_n.

Fix comment.

* gas/sh/dsp.s: Add three more instructions.
* gas/sh/dsp.d: Update.

Fix ld segfault for some elf targets.  Fix default layout for d10v.

Tests for d10v.

Fix build breakage.

Fix pc relocations.

* opncls.c (bfd_openr): Remove redundant bfd_set_error.
(bfd_fdopenr): Likewise.
(bfd_openstreamr): Likewise.
(bfd_openw): Likewise.

* targets.c: Sort target vecs.
(_bfd_target_vector): Add aix5coff64_vec, bfd_elf32_sh64_vec,
bfd_elf32_sh64l_vec, bfd_elf32_sh64lnbsd_vec,
bfd_elf32_sh64nbsd_vec, bfd_elf64_sh64_vec, bfd_elf64_sh64l_vec,
bfd_elf64_sh64lnbsd_vec, bfd_elf64_sh64nbsd_vec.
* configure.in: Sort target vecs.  Add m88kmach3_vec.
* configure: Regenerate.

*** empty log message ***

daily update

* elf64-mmix.c (bpo_reloc_request_sort_fn): Use member
bpo_reloc_no to break sort order ties, not address of items.

Import current --enable-gdb-build-warnings.

* Makefile.in (autoconf-changelog autoheader-changelog): Let name,
id, date and host to be overriden by NAME, ID, DATE and HOST
respectfully.  Use ISO dates.

* config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE,
REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW): Remove defines.
(i386_register_virtual_type, i386_register_convertible,
i386_register_convert_to_virtual, i386_register_convert_to_raw):
Remove prototypes.
* i386-tdep.c (i386_gdbarch_init): Adjust for removal of the
macros mentioned above.

* elf-hppa.h (elf_hppa_final_link): Fix formatting in comment.
Skip excluded sections in determing __gp value.
(elf_hppa_final_link_relocate): Use the symbol's address in
R_PARISC_FPTR64 relocations that don't need an opd entry.
* elf64-hppa.c (allocate_dynrel_entries): Simplify code.
(elf64_hppa_finalize_dynreloc): Likewise.
(elf64_hppa_size_dynamic_sections): Move comments and fix typo.
(elf64_hppa_finish_dynamic_symbol): Break up assert.

* config/i386/tm-i386lynx.h (SAVED_PC_AFTER_CALL): Remove define.
(i386lynx_saved_pc_after_call): Remove prototype.
* i386ly-tdep.c: Include "i386-tdep.h".
(i386lynx_saved_pc_after_call): Make static.  Use
read_memory_nobpt instead of read_memory.  Use
read_memory_unsigned_integer instead of read_memory_integer.
(i386lynx_init_abi): New function.
(i386lynx_coff_osabi_sniffer): New function.
(_initialize_i386bsd_tdep): New function.

*** empty log message ***

daily update

* sim-arm.h (enum sim_arm_regs): Rename sim_arm_regnum.

* config/i386/tm-i386.h (PARM_BOUNDARY, CALL_DUMMY,
CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET,
CALL_DUMMY_BREAKPOINT_OFFSET, FIX_CALL_DUMMY): Remove defines.
(i386_fix_call_dummy): Remove prototype.
* i386-tdep.c (i386_call_dummy_words): New variable.
(i386_gdbarch_init): Adjust for removal of the
macros mentioned above.

* command.h (add_setshow_auto_boolean_cmd): Replace
add_set_auto_boolean_cmd.
* cli/cli-decode.c (add_setshow_auto_boolean_cmd): Replace
add_set_auto_boolean_cmd.
* cli/cli-decode.h (add_set_auto_boolean_cmd): Delete declaration.
* mips-tdep.c (_initialize_mips_tdep): Update ``set mips
mask-address'' command.
(show_mask_address): Add cmd parameter.
* remote.c (add_packet_config_cmd): Update.  Change type of
set_func and show_func to cmd_sfunc_ftype.
(_initialize_remote): Update `set remote Z-packet'
(show_remote_protocol_qSymbol_packet_cmd): Add cmd parameter.
(show_remote_protocol_e_packet_cmd): Ditto.
(show_remote_protocol_E_packet_cmd): Ditto.
(show_remote_protocol_P_packet_cmd): Ditto.
(show_remote_protocol_Z_software_bp_packet_cmd): Ditto.
(show_remote_protocol_Z_hardware_bp_packet_cmd): Ditto.
(show_remote_protocol_Z_write_wp_packet_cmd): Ditto.
(show_remote_protocol_Z_read_wp_packet_cmd): Ditto.
(show_remote_protocol_Z_access_wp_packet_cmd): Ditto.
(show_remote_protocol_Z_packet_cmd): Ditto.
(show_remote_protocol_binary_download_cmd): Ditto.
(show_remote_cmd): Pass NULL to all of above.

* config/i386/tm-i386.h (PUSH_ARGUMENTS, STORE_STRUCT_RETURN,
DEPRECATED_EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE,
DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS, PUSH_DUMMY_FRAME,
POP_FRAME): Remove defines.
(i386_push_arguments, i386_store_struct_return,
i386_extract_return_value, i386_store_return_value,
i386_extract_struct_value_address, i386_push_dummy_frame,
i386_pop_frame): Renove prototypes.
* i386-tdep.c (i386_gdbarch_init): Adjust for removal of the
macros mentioned above.

* cli/cli-decode.c (add_setshow_boolean_cmd): Replace
add_set_boolean_cmd.
(add_setshow_cmd): New function.
* command.h (add_setshow_boolean_cmd): Replace
add_set_boolean_cmd.
* remote-rdi.c (_initialize_remote_rdi): Update ``set rdiheartbeat''
and ``set rdiromatzero''.
* maint.c (_initialize_maint_cmds): Update commented out code.
* cli/cli-decode.h (add_set_boolean_cmd): Delete declaration.
* target.c (initialize_targets): Update `set
trust-readonly-sections'.
* remote.c (_initialize_remote): Update `set remotebreak'.

* config/i386/tm-i386.h (FUNCTION_START_OFFSET, INNER_THAN,
BREAKPOINT, DECR_PC_AFTER_BREAK): Removed.
* i386-tdep.c (i386_skip_prologue): Adjust function signature to
fit into multi-arch framework.
(i386_breakpoint_from_pc): New function.
(i386_gdbarch_init): Adjust for removal of the macros mentioned
above.

* config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION,
FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS, FRAME_NUM_ARGS,
FRAME_ARGS_SKIP, FRAME_INIT_SAVED_REGS): Remove defines.
(i386_frameless_function_invocation, i386_frame_num_args,
i386_frame_init_saved_regs): Remove prototypes.
* i386-tdep.c (i386_gdbarch_init): Adjust for removal of the
macros mentioned above.

* cli/cli-decode.c (set_cmd_cfunc): Update.
(set_cmd_sfunc): Update.
* command.h (cmd_cfunc_ftype, cmd_sfunc_ftype): Declare.
(set_cmd_sfunc, set_cmd_cfunc): Update.
* cli/cli-decode.h: Update.

* i386-sol2-tdep.c (i386_sol2_osabi_sniffer): New function.
(_initialize_i386_sol2_tdep): Register i386_sol2_osabi_sniffer.

* defs.h (auto_boolean): Declare enum.
* command.h (cmd_auto_boolean): Delete enum.
* mips-tdep.c (mask_address_var): Update.
(mips_mask_address_p): Update.
(show_mask_address): Update.
* remote.c (struct packet_config): Update.
(update_packet_config): Update.
(show_packet_config_cmd): Update.
(packet_ok): Update.
(add_packet_config_cmd): Update.
(_initialize_remote):
* command.h: Update.
* cli/cli-setshow.c (parse_auto_binary_operation): Update.
(do_setshow_command): Update.
* cli/cli-decode.c (add_set_auto_boolean_cmd): Update.
* cli/cli-decode.h: Update.

2002-06-15  H.J. Lu  (hjl@gnu.org)

* nm.c (print_size): New variable. Initialize to 0.
(long_options): Add 'S'/"print-size".
(main): Handle 'S'.
(print_symbol_info_bsd): Print size only if print_size is not
0.

* doc/binutils.texi: Document -S/--print-size.

* config/i386/tm-cygwin.h, config/i386/tm-fbsd.h,
config/i386/tm-go32.h, config/i386/tm-i386gnu.h,
config/i386/tm-i386sol2.h, config/i386/tm-i386v4.h,
config/i386/tm-linux.h, config/i386/tm-nbsd.h,
config/i386/tm-obsd.h (HAVE_I387_REGS): Remove define.
* config/i386/tm-i386.h: Unconditionally define FLOAT_INFO.

* i386-tdep.c (i386_coff_osabi_sniffer): Add "coff-go32" to the
list of DJGPP COFF targets.

Clean up the mess I made from my last checkin.

* config/i386/tm-i386.h (REGISTER_SIZE): Remove define.
(NUM_GREGS, NUM_FREGS, NUM_SSE_REGS): Remove defines.
(FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove defines.
(FP0_REGNUM): Remove define.
(MAX_REGISTER_RAW_SIZE, MAX_REGISTER_VIRTUAL_SIZE,
MAX_REGISTER_VIRTUAL_SIZE): Remove define.
(i386_register_virtual_size): Remove protoype.
* i386-tdep.c (i386_register_virtual_size): Removed.
(i386_extract_return_value, i386_store_return_value): Use
FP0_REGNUM instead of NUM_FREGS to determine whether the
floating-point registers are available.
(i386_gdbarch_init): Tweak FIXME about FPU registers.
Adjust for removal of macros mentioned above.

* i386-tdep.c (i386_gdbarch_init): Tewak

* i386v4-nat.c: Include "i386-tdep.h".  Reformat and tweak various
comments.
(fill_gregset, supply_gregset, supply_fpregset, fill_fpregset):
Remove prototypes.
(supply_gregset, fill_gregset): Remove use of register keyword and
remove declaration for regmap.  Use I386_NUM_GREGS instead of
NUM_REGS and NUM_FREGS.
(FPREGSET_FSAVE_OFFSET): Remove.
(supply_fpregset, fill_fpregset): Use FPO_REGNUM instead of
NUM_FREGS to determine whether the floating-point registers are
available.

* i386gnu-nat.c (supply_gregset, gnu_fetch_registers,
gnu_store_registers): Replace usage of NUM_GREGS with
I386_NUM_GREGS.

* i386-linux-nat.c (OLD_CANNOT_FETCH_REGISTER,
OLD_CANNOT_STORE_REGISTER, supply_gregset, fill_gregset): Replace
usage of NUM_GREGS with I386_NUM_GREGS.

* i386-linux-nat.c (fill_gregset): Remove redundant parentheses.

* i386bsd-nat.c: Include "i386-tdep.h".
(supply_gregset, fill_gregset): Replace usage of NUM_GREGS with
I386_NUM_GREGS.

* i386v-nat.c: Remove copnditional inclusion of <asm/debugreg.h>,
and associated comment.  They no longer make any sense, since we
don't use this file anymore on Linux.

* config/i386/tm-i386.h (MAX_NUM_REGS): Removed.
* i386-tdep.c (i386_register_offset, i386_register_size): Use
I386_SSE_NUM_REGS instead of MAX_NUM_REGS for the number of
elements in these arrays.
(_initialize_i386_tdep): Use I386_SSE_NUM_REGS instead of
MAX_NUM_REGS.

* osabi.h (gdb_osabi): Add GDB_OSABI_LYNXOS.
* osabi.c (gdb_osabi_names): Add entry for "LynxOS".

Fix for transfers across segments.

daily update

*** empty log message ***

+ * gdbarch.sh (DEPRECATED_EXTRACT_RETURN_VALUE): Rename
+ EXTRACT_RETURN_VALUE.
+ (DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS): Rename
+ EXTRACT_STRUCT_VALUE_ADDRESS.
+ * gdbarch.h, gdbarch.c: Regenerate.
+
+ * values.c (value_being_returned): Handle
+ DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS.
+ (EXTRACT_RETURN_VALUE): Define as DEPRECATED_EXTRACT_RETURN_VALUE.
+
+ * arm-linux-tdep.c (arm_linux_init_abi): Update.
+ * arm-tdep.c (arm_gdbarch_init): Update.
+ * avr-tdep.c (avr_gdbarch_init): Update.
+ * cris-tdep.c (cris_gdbarch_init): Update.
+ * d10v-tdep.c (d10v_gdbarch_init): Update.
+ * ia64-tdep.c (ia64_gdbarch_init): Update.
+ * m68hc11-tdep.c (m68hc11_gdbarch_init): Update.
+ * rs6000-tdep.c (rs6000_gdbarch_init): Update.
+ * s390-tdep.c (s390_gdbarch_init): Update.
+ * sh-tdep.c (sh_gdbarch_init): Update.
+ * s390-tdep.c (s390_gdbarch_init): Update.
+ * sparc-tdep.c (sparc_gdbarch_init): Update.
+ * ns32k-tdep.c (ns32k_gdbarch_init): Update.
+ * v850-tdep.c (v850_gdbarch_init): Update.
+ * vax-tdep.c (vax_gdbarch_init): Update.
+ * x86-64-tdep.c (x86_64_gdbarch_init): Update.
+ * xstormy16-tdep.c (xstormy16_gdbarch_init): Update.
+
+ * config/arc/tm-arc.h: Update.
+ * config/d30v/tm-d30v.h: Update.
+ * config/fr30/tm-fr30.h: Update.
+ * config/h8300/tm-h8300.h: Update.
* config/h8500/tm-h8500.h: Update.
* config/i386/tm-i386.h: Update.
* config/i386/tm-ptx.h: Update.
* config/i386/tm-symmetry.h: Update.
* config/i960/tm-i960.h: Update.
* config/m32r/tm-m32r.h: Update.
* config/m68k/tm-delta68.h: Update.
* config/m68k/tm-linux.h: Update.
* config/m68k/tm-m68k.h: Update.
* config/m88k/tm-m88k.h: Update.
* config/mcore/tm-mcore.h: Update.
* config/mips/tm-mips.h: Update.
* config/mn10200/tm-mn10200.h: Update.
* config/pa/tm-hppa.h: Update.
* config/pa/tm-hppa64.h: Update.
* config/sparc/tm-sp64.h: Update.
* config/sparc/tm-sparc.h: Update.
* config/sparc/tm-sparclet.h: Update.
* config/z8k/tm-z8k.h: Update.

* Makefile.in (i386_linux_tdep_h): Define.
(i386_tdep_h, i387_tdep_h): Define.
(i386-linux-nat.o): Add $(i386_linux_tdep_h),
$(i386_tdep_h) and $(i387_tdep_h).
* i386-linux-nat.c: Include "i386-linux-tdep.h".

* config/i386/tm-i386.h (START_INFERIOR_TRAPS_EXPECTED): Removed.
Already covered by the default.

* config/i386/tm-i386.h (TARGET_LONG_DOUBLE_FORMAT,
TARGET_LONG_DOUBLE_BIT): Remove.  * i386-tdep.c
(i386_gdbarch_init): Initialize long_double_format and long_double
bit.

* config/i386/i386sol2.mt (TDEPFILES): Add i386-sol2-tdep.o and
i386bsd-tdep.o.  Remove solib.o, solib-svr4.o and solib-legacy.o.
Move these to ...
* config/i386/i386sol2.mh: ... here.
* config/i386/tm-i386sol2.h (STAB_REG_TO_REGNUM): Remove define.
(sigtramp_saved_pc, I386V4_SIGTRAMP_SAVED_PC): Don't #undef.
(SIGCONTEXT_PC_OFFSET): Remove define.
(IN_SIGTRAMP): Remove define.
* i386-sol2-tdep.c: New file.

* config/i386/i386nw.mt (TM_FILE): Change to tm-i386.h.
* config/i386/tm-i386nw.h: Removed.

* config/i386/tm-fbsd.h (STAB_REG_TO_REGNUM,
USE_STRUCT_CONVENTION): Remove defines.
(JB_ELEMENT_SIZE, JB_PC, GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
(IN_SIGTRAMP): Remove define.
(i386bsd_in_sigtramp): Remove prototype.
(i386bsd_sigtramp_start, i386bsd_sigtramp_end): Turn into a
function.  Update comment accordingly
(SIGTRAMP_START, SIGTRAMP): Adjust definition accordingly.
(FRAME_SAVED_PC): Remove define.
(i386bsd_frame_saved_pc): Remove prototype.
* config/i386/tm-nbsd.h (JB_ELEMENT_SIZE, JB_PC,
GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
(IN_SIGTRAMP): Remove define.
(i386bsd_in_sigtramp): Remove prototype.
(i386bsd_sigtramp_start, i386bsd_sigtramp_end): Turn into a
function.  Update comment accordingly
(SIGTRAMP_START, SIGTRAMP): Adjust definition accordingly.
(FRAME_SAVED_PC): Remove define.
(i386bsd_frame_saved_pc): Remove prototype.
* config/i386/tm-nbsdaout.h (i386nbsd_aout_use_struct_convention):
Remove prototype.
(USE_STRUCT_CONVENTION): Remove prototype.
* i386bsd-nat.c (i386bsd_sigcontext_pc_offset): Remove
declaration.
(_initialize_i386bsd_nat): Revise logic to determine some
constants at compile time when compiling a native GDB.  Warn if
things don't match up with what we expect.
* i386bsd-tdep.c (i386bsd_sigtramp_start, i386bsd_sigtramp_end):
Remove variables.
(i386bsd_in_sigtramp): Rename tp i386bsd_pc_in_sigtramp.  Rewrite
to use date stored in `struct gdbarch_tdep'.
(i386bsd_sigcontext_offset): Remove varaible.
(i386bsd_sigtramp_saved_pc): Make public.  Rewrite to use data
stored in `struct gdbarch_tdep'.
(i386bsd_frame_saved_pc): Make static.
(i386bsd_sigtramp_start, i386bsd_sigtramp_end): New functions.
(i386bsd_sc_pc_offset, i386nbsd_sc_pc_offset,
i386fbsd_sigtramp_start, i386fbsd_sigtramp_end,
i386fbsd4_sc_pc_offset): New variables.
(i386bsd_init_abi, i386nbsd_init_abi, i386nbsdelf_init_abi,
i386fbsdaout_init_abi, i386fbsd_init_abi, i386fbsd4_init_abi): New
functions.
(i386bsd_aout_osabi_sniffer, _initialize_i386bsd_tdep): New
functions.
* i386fbsd-nat.c (_initialize_i386fbsd_nat): Fix type in comment.
Modify the value of i386fbsd_sigtramp_start and
i386fbsd_sigtramp_end instead of i386bsd_sigtramp_start and
i386fbsd_sigtramp_end.
* i386nbsd-tdep.c: (i386nbsd_aout_use_struct_convention): Remove
function.

* config/i386/tm-linux.h (I386_LINUX_ORIG_EAX_REGNUM): Move
define to i386-linux-tdep.h.
(NUM_REGS, MAX_NUM_REGS, REGISTER_BYTES, REGISTER_NAME,
REGISTER_BYTE, REGISTER_RAW_SIZE, STAB_REG_TO_REGNUM): Remove
defines.
(i386_linux_register_name, i386_linux_register_byte,
i386_linux_register_raw_size): Remove prototypes.
(i386_linux_svr4_fetch_link_map_offsets): Remove prototype.
(SVR4_FETCH_LINK_MAP_OFFSETS): Remove define.
(IN_SIGTRAMP, FRAME_CHAIN, FRAME_SAVED_PC, SAVED_PC_AFTER_CALL,
TARGET_WRITE_PC): Remove defines.
(i386_linux_in_sigtramp, i386_linux_frame_chain,
i386_linux_frame_saved_pc, i386_linux_saved_pc_after_call,
i386_linux_write_pc): Remove prototypes.
(JB_ELEMENT_SIZE, JB_PC, GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
* i386-linux-tdep.h: New file.
* i386-linux-nat.c: Include "i386-linux-tdep.h".
* i386-linux-tdep.c: Include "i386-tdep.h" and
"i386-linux-tdep.h".
(i386_linux_register_name, i386_linux_register_byte,
i386_linux_register_raw_size, i386_linux_in_sigtramp,
i386_linux_write_pc, i386_linux_svr4_fetch_link_map_offsets):
Make static.
(i386_linux_init_abi): New function.
(_initialize_i386_linux_tdep): New function.

* config/i386/tm-i386.h (SAVED_PC_AFTER_CALL): Remove define.
(i386_saved_pc_after_call): Remove prototype.
(MAX_NUM_REGS): Increase to deal with Linux's orig_eax "register".
(REGISTER_NAME, STAB_REG_TO_REGNUM, SDB_REG_TO_REGNUM,
DWARF_REG_TO_REGNUM, DWARF2_REG_TO_REGNUM): Remove defines.
(i386_register_name, i386_stab_reg_to_regnum,
i386_dwarf_reg_to_regnum): Remove prototypes.
(SIZEOF_GREGS, SIZEOF_FPU_REGS, SIZEOF_FPU_CTL_REGS,
SIZEOF_SSE_REGS): Remove defines.
(REGISTER_BYTES): Remove define.
(REGISTER_BYTE, REGISTER_RAW_SIZE): Remove defines.
(i386_register_byte, i386_register_raw_size): Remove prototypes.
(FRAME_CHAIN, FRAME_SAVED_PC): Remove defines.
(i386_frame_chain, i386_frame_saved_pc): Remove prototypes.
* config/i386/tm-i386v4.h (FRAME_CHAIN_VALID): Remove define.
(JB_ELEMENT_SIZE, JB_PC, JB_EBX, JB_ESI, JB_EDI, JB_EBP, JB_ESP,
JB_EDX, GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
(I386V4_SIGTRAMP_SAVED_PC, IN_SIGTRAMP): Remove defines.
(sigtramp_saved_pc): Remove define.
(i386v4_sigtramp_saved_pc): Remove prototype.
* config/i386/tm-go32.h (FRAME_CHAIN,
FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC): Remove defines.
(i386go32_frame_saved_pc): Remove prototype.
(JB_ELEMENT_SIZE, JB_PC, GET_LONGJMP_TARGET): Remove defines.
(get_longjmp_target): Remove prototype.
* i386-tdep.h: Include "osabi.h".
(enum i386_abi): Removed.
(enum struct_return): New enum.
(struct gdbarch_tdep): Remove abi member, add osabi, jb_pc_offset,
struct_return, sigtramp_saved_pc, sigtramp_start, sigtramp_end and
sc_pc_offset members.
(i386_gdbarch_register_os_abi): Remove prototype.
(I386_NUM_GREGS, I386_NUM_FREGS, I386_NUM_XREGS,
I386_SSE_NUM_REGS): New defines.
(I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS,
I386_SSE_SIZEOF_REGS): New defines.
(i386_register_name, i386_register_byte, i386_register_raw_size):
New prototypes.
(i386_elf_init_abi, i386_svr4_init_abi): New prototypes.
(i386bsd_sigtramp_saved_pc): New prototype.
* i386-tdep.c: Don't include "elf-bfd.h".
(i386_stab_reg_to_regnum, i386_dwarf_reg_to_regnum,
i386_frame_chain, i386_saved_pc_after_call): Make static.
(i386_frame_saved_pc): Rewrite to call architecture dependent
function to deal with signal handlers.  Make static.
(i386go32_frame_saved_pc): Removed.
[GET_LONGJMP_TARGET] (JB_PC, JB_ELEMENT_SIZE, get_longjmp_target):
Removed.
(i386_get_longjmp_target): New function.
(default_struct_convention, pcc_struct_convention,
reg_struct_convention, valid_conventions, struct_convention): New
variables.
(i386_use_struct_convention): New function.
(i386v4_sigtramp_saved_pc): Renamed to
i386_svr4_sigtramp_saved_pc.  Made static.  Moved.
(i386_pc_in_sigtramp): New function.
(i386_abi_names): Removed.
(ABI_TAG_OS_GNU_LINUX, ABI_TAG_OS_GNU_HURD,
ABI_TAG_OS_GNU_SOLARIS, ABI_TAG_OS_FREEBSD, ABI_TAG_OS_NETBSD):
Removed.
(process_note_sections, i386_elf_abi_from_note, i386_elf_abi,
i386_gdbarch_register_os_abi): Removed.
(struct i386_abi_handler): Removed.
(i386_abi_handler_list): Removed.
(i386_svr4_pc_in_sigtramp, i386_go32_pc_in_sigtramp): New
functions.
(i386_elf_init_abi, i386_svr4_init_abi, i386_go32_init_abi,
i386_nw_init_abi): New functions.
(i386_gdbarch_init): Rewritten to use generic OS ABI framework.
Use set_gdbarch_xxx() calls instead of relying on macros for a
number of calls.
(i386_coff_osabi_sniffer, i386_nlm_osabi_sniffer): New functions.
(_initialize_i386_tdep): Add new 'struct-convcention' command.
Register the various architecture variants defined in this file.

2002-06-14  Chris Demetriou  <cgd@broadcom.com>
            Ed Satterthwaite  <ehs@broadcom.com>

* mips3d.igen: New file which contains MIPS-3D ASE instructions.
* Makefile.in (IGEN_INCLUDE): Add mips3d.igen.
* mips.igen: Include mips3d.igen.
(mips3d): New model name for MIPS-3D ASE instructions.
(CVT.W.fmt): Don't use this instruction for word (source) format
instructions.
* cp1.c (fp_binary_r, fp_add_r, fp_mul_r, fpu_inv1, fpu_inv1_32)
(fpu_inv1_64, fp_recip1, fp_recip2, fpu_inv_sqrt1, fpu_inv_sqrt1_32)
(fpu_inv_sqrt1_64, fp_rsqrt1, fp_rsqrt2): New functions.
(NR_FRAC_GUARD, IMPLICIT_1): New macros.
* sim-main.h (fmt_pw, CompareAbs, AddR, MultiplyR, Recip1, Recip2)
(RSquareRoot1, RSquareRoot2): New macros.
(fp_add_r, fp_mul_r, fp_recip1, fp_recip2, fp_rsqrt1)
(fp_rsqrt2): New functions.
* configure.in: Add MIPS-3D support to mipsisa64 simulator.
* configure: Regenerate.

2002-06-14  Daniel Jacobowitz  <drow@mvista.com>

        * gdbtypes.h (TYPE_FLAG_VARARGS): Update comment.
        (struct main_type): Remove arg_types member.  Update comments for
        struct field.
        (TYPE_ARG_TYPES): Remove.
        (TYPE_FN_FIELD_ARGS): Update.
        (smash_to_method_type): Update prototype.

        * c-typeprint.c (cp_type_print_method_args): Take method type
        instead of argument list.  Use new argument layout.  Simplify.
        (c_type_print_args): Use new argument layout.  Simplify.
        (c_type_print_base): Update call to cp_type_print_method_args.
        * dwarf2read.c (dwarf2_add_member_fn): Remove unneeded type
        argument; use die->type instead.  Update call to
        smash_to_method_type.
        (read_structure_scope): Update call to dwarf2_add_member_fn.
        * gdbtypes.c (allocate_stub_method): Update comment.
        (smash_to_method_type): Take new NARGS and VARARGS arguments.
        Use new argument layout.
        (check_stub_method): Use new argument layout.  Don't count
        void as an argument.
        (print_arg_types): Update comments.  Use new argument layout.
        (recursive_dump_type): Don't print arg_types member.
        * hpread.c (hpread_read_struct_type): Use new argument layout.
        (fixup_class_method_type): Likewise.
        (hpread_type_lookup): Likewise.
        * stabsread.c (read_type): Update calls to read_args and
        smash_to_method_type.
        (read_args): Use new argument layout.  Simplify.
        * valops.c (typecmp): Use new argument layout.  Update parameters
        and comments.  Simplify.
        (hand_function_call): Use new argument layout.
        (search_struct_method): Update call to typecmp.
        (find_overload_match): Use new argument layout.

2002-06-14  H.J. Lu  <hjl@gnu.org>
            Daniel Jacobowitz  <drow@mvista.com>

        * dwarf2dbg.h (dwarf2_directive_file): Return char *.
        * dwarf2dbg.c (dwarf2_directive_file): Return filename.
        * config/tc-mips.c (s_mips_file): Call s_app_file_string
        and new_logical_line for the first .file directive.
        * read.c (s_app_file_string): New function.
        (s_app_file): Call it.
        * read.h (s_app_file_string): Add declaration.

2002-06-14  Daniel Jacobowitz  <drow@mvista.com>

        * configure.in: Remove MIPS_STABS_ELF.
        * configure: Regenerated.
        * config.in: Regenerated.
        * config/obj-elf.h (ECOFF_DEBUGGING): Define to mips_flag_mdebug
        for MIPS targets.
        * config/tc-mips.c (mips_pseudo_table): Remove #ifdef around
        ".extern".
        (pdr_seg): Declare unconditionally.
        (md_begin): Always generate .pdr unless ECOFF_DEBUGGING or not ELF.
        (s_mips_end): Likewise.  Generate stabs function markers.
        (s_mips_ent): Generate stabs function markers.
        (s_mips_frame): Always generate .pdr unless ECOFF_DEBUGGING or not
        ELF.
        (s_mips_mask): Likewise.
        (mips_flag_mdebug): New.
        (md_longopts): Add "mdebug" and "no-mdebug".
        (md_parse_options): Add OPTION_MDEBUG and OPTION_NO_MDEBUG.
        (mips_after_parse_args): Set mips_flag_mdebug.
        * doc/as.texinfo: Add "-mdebug" and "-no-mdebug" for MIPS.

2002-06-14  Daniel Jacobowitz  <drow@mvista.com>

        * gas/mips/lineno.d: Use --gstabs.
        * gas/mips/mips.exp (lineno.s): Remove XFAIL.

Enable 16 byte alignment for .bss, .data and .text sections so that sse and
sse2 code will work.

fix attribution in previous changelog entry

2002-06-13  Chris Demetriou  <cgd@broadcom.com>

* cp1.c (FP_PS_upper, FP_PS_lower, FP_PS_cat, FPQNaN_PS): New macros.
(value_fpr, store_fpr, fp_cmp, fp_unary, fp_binary, fp_mac)
(fp_inv_sqrt, fpu_format_name): Add paired-single support.
(convert): Note that this function is not used for paired-single
format conversions.
(ps_lower, ps_upper, pack_ps, convert_ps): New functions.
* mips.igen (FMT, MOVtf.fmt): Add paired-single support.
(check_fmt_p): Enable paired-single support.
(ALNV.PS, CVT.PS.S, CVT.S.PL, CVT.S.PU, PLL.PS, PLU.PS, PUL.PS)
(PUU.PS): New instructions.
(CVT.S.fmt): Don't use this instruction for paired-single format
destinations.
* sim-main.h (FP_formats): New value 'fmt_ps.'
(ps_lower, ps_upper, pack_ps, convert_ps): New prototypes.
(PSLower, PSUpper, PackPS, ConvertPS): New macros.