daily update

*** empty log message ***

2010-01-16  Stan Shebs  <stan@codesourcery.com>

* tracepoint.h (struct trace_status): Use unsigned long long
instead of size_t.
* tracepoint.c (trace_status_command): Fix printf directive.
(trace_save_command): Check fwrite returns, fix printf directive.
(trace_filename): New global.
(tfile_open): Set it, check read returns.
(tfile_close): Free trace_filename.
(tfile_get_traceframe_address): Check read returns.
(tfile_trace_find): Ditto.
(tfile_fetch_registers): Ditto.
(tfile_xfer_partial): Ditto.
(tfile_get_trace_state_variable_value): Ditto.

daily update

*** empty log message ***

daily update

Add trace file support.
* tracepoint.h (enum trace_stop_reason): New enum.
(struct trace_status): New struct.
(parse_trace_status): Declare.
(struct uploaded_tp): Move here from remote.c,
add fields for actions.
(struct uploaded_tsv): New struct.
* tracepoint.c (tfile_ops): New target vector.
(trace_fd): New global.
(tfile_open): New function.
(tfile_close): New function.
(tfile_files_info): New function.
(tfile_get_trace_status): New function.
(tfile_get_traceframe_address): New function.
(tfile_trace_find): New function.
(tfile_fetch_registers): New function.
(tfile_xfer_partial): New function.
(tfile_get_trace_state_variable_value): New function.
(init_tfile_ops): New function.
(_initialize_tracepoint): Call it, add tfile target.
(trace_status): New global.
(current_trace_status): New function.
(trace_running_p): Remove, change all users to get from
current_trace_status()->running.
(get_trace_status): Remove.
(trace_status_command): Call target_get_trace_status directly,
report more detail including tracing stop reasons.
(trace_find_command): Always allow tfind on a file.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
(trace_frames_offset, cur_offset): Declare as off_t.
(trace_regblock_size): Rename from reg_size, update users.
(parse_trace_status): New function.
(tfile_interp_line): New function.
(disconnect_or_stop_tracing): Ensure current trace
status before asking what to do.
(stop_reason_names): New global.
(trace_save_command): New command.
(get_uploaded_tp): Move here from remote.c.
(find_matching_tracepoint): Ditto.
(merge_uploaded_tracepoints): New function.
(parse_trace_status): Use stop_reason_names.
(_initialize_tracepoint): Define tsave command.
* target.h (target_ops): New fields to_save_trace_data,
to_upload_tracepoints, to_upload_trace_state_variables,
to_get_raw_trace_data, change to_get_trace_status
to take a pointer to a status struct.
(target_save_trace_data): New macro.
(target_upload_tracepoints): New macro.
(target_upload_trace_state_variables): New macro.
(target_get_raw_trace_data): New macro.
* target.c (update_current_target): Add new methods, change
signature of to_get_trace_status.
* remote.c (hex2bin): Make globally visible.
(bin2hex): Ditto.
(remote_download_trace_state_variable): Download name also.
(remote_get_trace_status): Update parameter, use
parse_trace_status.
(remote_save_trace_data): New function.
(remote_upload_tracepoints): New function.
(remote_upload_trace_state_variables): New function.
(remote_get_raw_trace_data): New function.
(remote_start_remote): Use them.
(_initialize_remote_ops): Add operations.
* ax-gdb.c: Include breakpoint.h.
* breakpoint.c (create_tracepoint_from_upload): Use
break_command_really, return tracepoint, warn about unimplemented
parts.
* NEWS: Mention trace file addition.

* gdb.texinfo (Trace Files): New section.
(Tracepoint Packets): Document QTSave and qTBuffer.
(Trace File Format): New appendix.

* generic/gdbtk-bp.c (gdb_trace_status): Use current_trace_status.

* gdb.trace/tfile.c: New file.
* gdb.trace/tfile.exp: New file.

bfd/
Fix compilation warning on gcc-3.4.
* vms-tir.c (start_etir_record, sto_imm): Rename the prototype
parameter index to sec_index according to the function definition.

gdb/
Fix compilation warning on gcc-3.4.
* exec.c (print_section_info): Move the `displacement' variable
initialization to its declaration.

2010-01-15  Sebastian Pop  <sebastian.pop@amd.com>

gas/
* config/tc-i386.c (md_assemble): Before accessing the IMM field
check that it's not an XOP insn.

gas/testsuite/
* gas/i386/x86-64-xop.d: Add missing patterns.
* gas/i386/x86-64-xop.s: Same.
* gas/i386/xop.d: Same.
* gas/i386/xop.s: Same.

opcodes/
* i386-opc.tbl: Support all the possible aliases for VPCOM* insns.
* i386-tbl.h: Regenerated.

gdb/
* gdb-gdb.py (StructMainTypePrettyPrinter): Fix TYPE_CODE_RANGE
comparison.

Remove duplicated entries.

* arm.cc (Arm_relocate_functions::thm_jump6): New function.
(Arm_relocate_functions::thm_jump8): New function.
(Arm_relocate_functions::thm_jump11): New function.
(Target_arm::Scan::local): Handle R_ARM_THM_JUMP6, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP11.
(Target_arm::Scan::global): Likewise.
(Target_arm::Relocate::relocate): Likewise.
(Target_arm::Relocatable_size_for_reloc::get_size_for_reloc):
Likewise.

Fix the patch author in the last entry. OOoops!

"info tasks" broken by typedefs in ATCB type definitions.

        * ada-lang.c (ada_template_to_fixed_record_type_1): Add call to
        ada_check_typedef before retrieving the length of the type for
        regular fields.

Do not use name-based lookup for unconstrained packed arrays.

        * ada-lang.c (find_parallel_type_by_descriptive_type):
        Limit the fallback to name-based lookups to the case where
        the type is a constrained packed array.

Enhance gdb-gdb.py to handle main_type.type_specific.

        * gdb-gdb.py: Print the type-specific part of struct main_type.

2010-01-14  Doug Kwan  <dougkwan@google.com>

* arm.cc (map, utility): Include headers.
(Target_arm::apply_cortex_a8_workaround): New method.
(Arm_relobj::do_relocate_sections): Apply any Cortex-A8 workaround.
(Target_arm::Scan::local): Handle R_ARM_THM_JUMP24, R_ARM_THM_JUMP19.
(Target_arm::Scan::global): R_ARM_THM_JUMP19.
(Target_arm::do_finalize_sections): Set fix_cortex_a8_ according to
the --[no-]fix-cortex-a8 command line options.
(Target_arm::Relocate::relocate): Handle R_ARM_JUMP19.
(Target_arm::relocate_stub): Use addend in instruction template.
* options.h (DEFINE_bool): Set the user-set flag.
(General_options): Add --[no-]-fix-cortex options.
* output.cc (Output_section::convert_input_sections_to_relaxed_sections)
: Update fast look-up map after conversion.

* object.cc (Sized_relobj::do_layout): Change to call layout_gnu_stack
in the first pass of do_layout.

gdb/
* configure.ac (AC_CHECK_FUNCS): Check for setrlimit and getrlimit.
* configure: Regenerate.
* config.in: Regenerate.
* utils.c: Include sys/resource.h.
(dump_core, can_dump_core): New.
(internal_vproblem): Update the comment.  Check can_dump_core while
setting dump_core_p.  Replace two abort calls by dump_core calls.

*** empty log message ***

daily update

gdb/
* NEWS: Document the PIE support.

gdb/
* linux-tdep.c: Remove includes gdbcore.h, observer.h and elf-bfd.h.
(check_is_pie_binary, _initialize_linux_tdep): Remove.

gdb/testsuite/
* gdb.base/pie-support.exp, gdb.base/pie-support.c: Remove.

gdb/
* solib-svr4.c (svr4_exec_displacement): New comment for entry_point.
Replace exec_entry_point call by bfd_get_start_address.

gdb/
Support Valgrind attachments broken by the PIE support.
* auxv.c: Include gdbcore.h.
(procfs_xfer_auxv): Make static.  Reduce its comment.  Drop its
parameters ops, object and annex.  Remove their assertions.
(ld_so_xfer_auxv, memory_xfer_auxv): New function.
* auxv.h (procfs_xfer_auxv): Remove comment.  Rename to ...
(memory_xfer_auxv): ... here.
* linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to
memory_xfer_auxv.
* procfs.c (procfs_xfer_partial): Likewise.
* solib-svr4.c (svr4_relocate_main_executable): New prototype.
(svr4_special_symbol_handling): Call svr4_relocate_main_executable.
(svr4_solib_create_inferior_hook): Conditionalize the
svr4_relocate_main_executable call.

gdb/testsuite/
* gdb.base/valgrind-db-attach.exp, gdb.base/valgrind-db-attach.c: New.

gdb/testsuite/
* gdb.base/break-interp-lib.c: Include unistd.h, assert.h and stdio.h.
(libfunc): New parameter action.  Implement also selectable "sleep".
* gdb.base/break-interp-main.c: Include assert.h.
(libfunc): New parameter action.
(main): New parameters argc and argv.  Assert argc.  Pass argv.
* gdb.base/break-interp.exp (test_core): Pass the "segv" argument.
(test_attach): New proc.
(test_ld): Pass new "segv" exec parameter.  Call also test_attach.
* lib/gdb.exp (core_find): New parameter arg.  Pass it to $binfile.

gdb/
* solib-svr4.c (scan_dyntag): Remove variable dyn_addr.  New variable
target_section.  Find SECT in current_target_sections, gdb_assert it.
(elf_lookup_lib_symbol): Pass the binary file if given symfile_objfile.
New variable abfd.
* symtab.c (lookup_objfile_from_block): Return the binary file instead
of separate debug info file.

gdb/testsuite/
* gdb.base/break-interp.exp (test_core): New proc.
(test_ld): Call it.

gdb/testsuite/
* gdb.base/break-interp-main.c, gdb.base/break-interp-lib.c: New.
* gdb.base/break-interp.exp: Exit on skip_shlib_tests.  Change $srcfile.
New variables $binfile_lib and $srcfile_lib.  Call get_compiler_info
and gdb_compile_shlib.  Use new -Wl compiler options.
(dl bt, main bt): New tests.

gdb/
Support PIEs with no symfile_objfile.
* exec.c (print_section_info <abfd == exec_bfd>): Relocate Entry point.
* solib-svr4.c (svr4_relocate_main_executable <exec_bfd>): New block.

gdb/testsuite/
Support PIEs with no symfile_objfile.
* gdb.base/break-interp.exp: New argument at the test_ld calls.
(test_ld): New parameter trynosym.
(test_ld <$trynosym>): New block.

gdb/
* solib-svr4.c (svr4_relocate_main_executable): Move the static exec
code part to ...
(svr4_static_exec_displacement): ... a new function.
(svr4_exec_displacement): New function.
(svr4_relocate_main_executable): Call svr4_exec_displacement.  Allocate
new_offsets using alloca now.  Remove variable old_chain and changed.
Call objfile_relocate unconditionally now.

gdb/testsuite/
* gdb.base/break-interp.exp: New file.

Replace VEX.DNS with VEX.NDS in comments.

2010-01-14  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.h (VexVVVV): Replace VEX.DNS with VEX.NDS in
comments.

* gdbtypes.c (arch_flags_type): Fix comment.
* gdbtypes.h (arch_composite_type): Fix comment.

Add names_mm, names_xmm and names_ymm.

2010-01-14  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (names_mm): New.
(intel_names_mm): Likewise.
(att_names_mm): Likewise.
(names_xmm): Likewise.
(intel_names_xmm): Likewise.
(att_names_xmm): Likewise.
(names_ymm): Likewise.
(intel_names_ymm): Likewise.
(att_names_ymm): Likewise.
(print_insn): Set names_mm, names_xmm and names_ymm.
(OP_MMX): Use names_mm, names_xmm and names_ymm.
(OP_XMM): Likewise.
(OP_EM): Likewise.
(OP_EMC): Likewise.
(OP_MXC): Likewise.
(OP_EX): Likewise.
(XMM_Fixup): Likewise.
(OP_VEX): Likewise.
(OP_EX_VexReg): Likewise.
(OP_Vex_2src): Likewise.
(OP_Vex_2src_1): Likewise.
(OP_Vex_2src_2): Likewise.
(OP_REG_VexI4): Likewise.

Remove argument name.

2010-01-14  H.J. Lu  <hongjiu.lu@intel.com>

* ia64.h (ia64_find_opcode): Remove argument name.
(ia64_find_next_opcode): Likewise.
(ia64_dis_opcode): Likewise.
(ia64_free_opcode): Likewise.
(ia64_find_dependency): Likewise.

Support 64bit targets.

2010-01-14  H.J. Lu  <hongjiu.lu@intel.com>

* ld-elf/orphan4.d: Support 64bit targets.

2009-01-14  Tristan Gingold  <gingold@adacore.com>

* machoread.c (macho_add_oso_symfile): Add symfile_flags parameter.
Call xstrdup for abfd->filename.  Pass symfile_flags and objfile flags
to symbol_file_add_from_bfd.  Add OSO as separate objfile.
(macho_oso_symfile): Add symfile_flags parameter.  Pass it to
macho_add_oso_symfile.
(macho_symfile_read): Pass symfile_flags to macho_oso_symfile.

Tru64: Dead threads are never deleted.

        * dec-thread.c (dec_thread_ptid_is_alive): New function.
        (dec_thread_count_gdb_threads): Fix counter increment.
        (dec_thread_add_gdb_thread): Fix *listp increment.
        (resync_thread_list): Fix bug in deletion of dead threads that
        caused all threads to be deleted, instead of just the dead ones.

2010-01-14  Tristan Gingold  <gingold@adacore.com>

* dwarf.c (get_AT_name): Handle DW_AT_use_GNAT_descriptive_type
and DW_AT_GNAT_descriptive_type.

2010-01-13  Phil Muldoon  <pmuldoon@redhat.com>

PR python/10705

* python/python-internal.h: Add lazy_string_object_type
definition.
(create_lazy_string_object, gdbpy_initialize_lazy_string)
(gdbpy_is_lazystring, gdbpy_extract_lazy_string): Define.
* python/py-value.c (valpy_lazy_string): New function.
(convert_value_from_python): Add lazy string conversion.
* python/py-prettyprint.c (pretty_print_one_value): Check if
return is also a lazy string.
(print_string_repr): Add lazy string printing branch.
(print_children): Likewise.
* python/py-lazy-string.c: New file. Implement lazy strings.
* python/python.c (_initialize_python): Call
gdbpy_initialize_lazy_string.
* varobj.c (value_get_print_value): Add lazy string printing
branch.  Account for encoding.
* c-lang.c (c_printstr): Account for new encoding argument.  If
encoding is NULL, find encoding suited for type, otherwise use
user encoding.
* language.h (language_defn): Add encoding argument.
(LA_PRINT_STRING): Likewise.
* language.c (unk_lang_printstr): Update to reflect new encoding
argument to language_defn.
* ada-lang.h (ada_printstr): Likewise.
* c-lang.h (c_printstr): Likewise.
* p-lang.h (pascal_printstr);
* f-lang.c (f_printstr): Likewise.
* m2-lang.c (m2_printstr): Likewise.
* objc-lang.c (objc_printstr): Likewise.
* p-lang.c (pascal_printstr): Likewise.
* scm-lang.c (scm_printstr): Likewise.
* c-valprint.c (c_val_print): Update LA_PRINT_STRING call for
encoding argument.
* ada-valprint.c (ada_printstr): Likewise.
* f-valprint.c (f_val_print): Likewise
* m2-valprint.c (m2_val_print): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
* expprint.c (print_subexp_standard): Likewise.
* valprint.c (val_print_string): Likewise.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-lazy-string.
(SUBDIR_PYTHON_SRCS): Likewise.
(py-lazy-string.o): New rule.

2010-01-13  Phil Muldoon  <pmuldoon@redhat.com>

* gdb.texinfo (Values From Inferior): Document lazy_string value
method.
(Python API): Add Lazy strings menu item.
(Lazy Strings In Python): New node.

2010-01-13  Phil Muldoon  <pmuldoon@redhat.com>

* gdb.python/py-value.exp (test_lazy_strings): Add lazy string test.
* gdb.python/py-prettyprint.py (pp_ls): New printer.
* gdb.python/py-prettyprint.exp (run_lang_tests): Add lazy string
test.
* gdb.python/py-prettyprint.c: Define lazystring test structure.
* gdb.python/py-mi.exp: Add lazy string test.

Wildcard the file offset.

* emultempl/elf32.em (_place_orphan): If an input section doesn't
match an existing output section, but an unused output section
statement does match, use it.
* emultempl/pe.em (_place_orphan): Likewise.
* emultempl/pep.em (_place_orphan): Likewise.

* ld-elf/orphan4.d: New.
* ld-elf/orphan4.ld: New.
* ld-elf/orphan4.s: New.

* config/bfin-aux.h: Remove argument names in function
declarations.
* config/bfin-lex.l (parse_int): Fix shadowed variable name
warning.
* config/bfin-parse.y (value_match): Remove argument names
in declaration.
(notethat): Likewise.
(yyerror): Likewise.

2010-01-13  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_relobj::section_needs_reloc_stub_scanning,
Arm_relobj::scan_sections_for_stubs): Rearrange code to avoid an
apparent compiler problem of not folding static constant integral
data members of elfcpp::Elf_sizes<32>.

*** empty log message ***

daily update

2010-01-13  Chao-ying Fu  <fu@mips.com>

* ld-mips-elf/jr-to-b-1.d, ld-mips-elf/jr-to-b-2.d: New tests.
* ld-mips-elf/jr-to-b-1.s, ld-mips-elf/jr-to-b-2.s: Source.
* ld-mips-elf/mips-elf.exp: Run new tests.

2010-01-13  Chao-ying Fu  <fu@mips.com>

* elfxx-mips.c (JR_TO_B_P): New define to transform JR to B.
It is true for all CPUs.
(jal_reloc_p): New function.
(mips_elf_calculate_relocation): Rename require_jalxp to
cross_mode_jump_p.
Update comment for CROSS_MODE_JUMP_P.
Set up cross_mode_jump_p based on the mode change.
(mips_elf_perform_relocation): Rename require_jalx to cross_mode_jump_p.
Update comment for CROSS_MODE_JUMP_P.
Test cross_mode_jump_p and jal_reloc_p to turn jal to jalx.
Use !cross_mode_jump_p to guard conversion.
Convert "jr t9" to "b", if possible.
(_bfd_mips_elf_relocate_section): Rename require_jalx to
cross_mode_jump_p.
Pass &cross_mode_jump_p to call mips_elf_calculate_relocation.
Pass cross_mode_jump_p to call mips_elf_perform_relocation.

2010-01-13  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_relobj::section_needs_reloc_stub_scanning,
Arm_relobj::section_needs_cortex_a8_stub_scanning,
Arm_relobj::scan_section_for_cortex_a8_erratum,
Arm_relobj::scan_span_for_cortex_a8_erratum): New methods.
(Arm_relobj::scan_sections_for_stubs): Move code deciding what
sections to scan for relocation stubs into a new method
Arm_relobj::section_needs_reloc_stub_scanning.  Handle both
relocation and Cortex-A8 stub scanning.
(Target_arm::do_relax): Force stubs to be after stubbed sections
if fixing the Cortex-A8 erratum.  Remove all Cortex-A8 stubs at
the beginning of a new relaxation pass.  Update a comment.
(Target_arm::scan_span_for_cortex_a8_erratum): New method definition.

I forgot to commit this.

gas/testsuite/
* gas/arm/thumb-nop.s: Add .syntax unified.

gas/
* config/tc-arm.c (do_t_nop): Correct check for Thumb-2 NOP.

gas/testsuite/
* gas/arm/thumb-nop.d, gas/arm/thumb-nop.s: New test.
* gas/arm/relax_branch_align.d: Expect a default NOP instruction.
* gas/arm/vfp1_t2.d, gas/arm/vfp1xD_t2.d: Specify a CPU with
Thumb-2.

ld/testsuite/
* ld-arm/arm-elf.exp (armelftests): Assemble Cortex-A8 tests with
-mcpu=cortex-a8.

Update comments

2010-01-13  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (print_insn): Update comments.

    * cpu-m32c.c (m32c_scan): New function.  Ensures that a scan for
        "m32c" returns the m32c arch_info_struct and not the m16c
        arch_info_struct.
        (arch_info_struct): Use the new scan function.
        (bfd_m32c_arch): Likewise.

    * config/tc-h8300.c (h8300_elf_section): New function - issue a
        warning message if a new section is created without setting any
        attributes for it.
        (md_pseudo_table): Intercept section creation pseudos.
        (md_pcrel_from): Replace abort with an error message.
        * config/obj-elf.c (obj_elf_section_name): Export this function.
        * config/obj-elf.h (obj_elf_section_name): Prototype.

        * gas/elf/section0.d: Skip this test for the h8300.
        * gas/elf/section1.d: Likewise.
        * gas/elf/section6.d: Likewise.
        * gas/elf/elf.exp: Skip section2 and section5 tests when the
        target is the h8300.

        * ld-scrips/sort.exp: Skip these tests when the target is the
        h8300.

Add period to sentence in comment.

2010-01-13  Tristan Gingold  <gingold@adacore.com>

* config.bfd: Remove duplicated target vector for i386-*-darwin.
Appends new arch instead of overriding.
Use mach_o_x86_64_vec for x86_64-*-darwin.
* configure.in: Add mach_o_x86_64_vec.
* configure: Regenerate.
* targets.c: Declare mach_o_x86_64_vec, add it to _bfd_target_vector.
* Makefile.am (BFD64_BACKENDS): Add mach-o-x86-64.lo
(BFD64_BACKENDS_CFILES): Add mach-o-x86-64.c
* Makefile.in: Regenerate.
* mach-o-x86-64.c: New file.

2010-01-13  Tristan Gingold  <gingold@adacore.com>

* reloc.c: Add MACH_O_X86_64 relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.

2010-01-13  Tristan Gingold  <gingold@adacore.com>

* ar.c (main): Use lbasename.
(normalize): Ditto.
* objdump.c (update_source_path): Ditto.

Add new DW_AT_use_GNAT_descriptive_type CU attribute.

        * dwarf2.h (dwarf_attribute): Add DW_AT_use_GNAT_descriptive_type.

2010-01-13  Tristan Gingold  <gingold@adacore.com>

* archive.c (normalize): Use lbasename.
(bfd_bsd_truncate_arname): Ditto.
(bfd_gnu_truncate_arname): Ditto.

Initialize SIM_DESC properly.

2010-01-12  Doug Kwan  <dougkwan@google.com>

* arm.cc (Cortex_a8_reloc): New class.
(Target_arm::Target_arm): Initialize new data members fix_cortex_a8_
and cortex_a8_relocs_info_.
(Target_arm::fix_cortex_a8): New method definition.
(Target_arm::Cortex_a8_relocs_info): New type.
(Target_arm::fix_cortex_a8_, Target_arm::cortex_a8_relocs_info_):
New data member declarations.
(Target_arm::scan_reloc_for_stub): Record information about
relocations for THUMB branches that might be exempted from the
Cortex-A8 workaround.
(Target_arm::do_relax): Clear all Cortex-A8 relocation information
at the beginning of a relaxation pass.

add missing file

Remove rex_original

2010-01-12  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (rex_original): Removed.
(ckprefix): Remove rex_original.
(print_insn): Update comments.

2010-01-12  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_relobj::mapping_symbols_info_): New data member.
(Arm_relobj::Mapping_symbol_position,
 Arm_reloj::Mapping_symbol_position_less,
 Arm_relobj::Mapping_symbols_info): New types.
(Target_arm::is_mapping_symbol_name): New method definition.
(Arm_relobj::do_count_local_symbols): Save information about mapping
symbols.

*** empty log message ***

tweak previous entry to keep chronology right
(different timezones made the day off by one)

* mi/mi-main.c (list_available_thread_groups): Avoid "may be used
uninitialized" warning from gcc on local `tree'.

daily update

Implement core awareness.

* bcache.c (compare_ints): Remove
(print_percentage): Use compare_positive_ints.
* defs.h (compare_positive_ints): Declare.
* linux-nat.h (struct lin_lwp): New field core.
(linux_nat_core_of_thread_1): Declare.
* linux-nat.c (add_lwp): Init the 'core' field.
(linux_nat_wait_1): Record the core.
(linux_nat_core_of_thread_1, linux_nat_core_of_thread): New.
(linux_nat_add_target): Register the above.
* linux-thread-db.c (update_thread_core): New.
(thread_db_find_new_threads): Update core information for
every thread.
* remote.c (struct private_thread_info): New.
(free_private_thread_info, demand_private_info): New.
(PACKET_qXfer_threads, use_osdata_threads): New.
(struct thread_item, threads_parsing_context
(start_thread, end_thread, thread_attributes)
(thread_children, threads_children, threads_elements): New.
(remote_threads_info): Try qXfer:threads before anything
else.
(remote_protocol_packets): Register qXfer:threads.
(remote_open_1): Init use_osdata_threads.
(struct stop_reply): New field 'core'.
(remote_parse_stop_reply): Parse core number.
(process_stop_reply): Record core number.
(remote_xfer_partial): Handle qXfer:threads.
(remote_core_of_thread): New.
(init_remote_ops): Register remote_core_of_thread.
(_initialize_remote): Register qXfer:read.
* target.c (target_core_of_thread): New
* target.h (enum target_object): New value TARGET_OBJECT_THREADS.
(struct target_ops): New field to_core_of_threads.
(target_core_of_thread): Declare.
* gdbthread.h (struct thread_info): New field private_dtor.
* thread.c (print_thread_info): Report the core.
* ui-out.c (MAX_UI_OUT_LEVELS): Increase.
* utils.c (compare_positive_ints): New.
* features/threads.dtd: New.
* mi/mi-interp.c (mi_on_normal_stop): Report the core.
* mi/mi-main.c (struct collect_cores_data, collect_cores)
(do_nothing, free_vector_of_osdata_items)
(splay_tree_int_comparator, free_splay_tree): New.
(print_one_inferior_data): Implemented printing of selected
inferiors.  Collect and print cores.
(output_cores): New.
(mi_cmd_list_thread_groups): Support --recurse.  Permit specifying
thread groups together with --available.

* target-reloc.h (visibility_error): New inline function.
(relocate_section): Call visibility_error.
* testsuite/Makefile.am (check_DATA): Add protected_3.err.
(MOSTLYCLEANFILES): Likewise.
(protected_4_pic.o, protected_3.err): New targets.
* testsuite/protected_4.cc: New file.

gdb/
* configure: Regenerate (for _STRUCTURED_PROC).

bfd/
2010-01-12  Tristan Gingold  <gingold@adacore.com>

* makefile.vms (CFLAGS): Turns warnings into informational messages.

binutils/
2010-01-12  Tristan Gingold  <gingold@adacore.com>

* makefile.vms (CFLAGS): Turns warnings into informational messages.

Delete dead function.

        * ada-lang.c (extract_string): Delete.  No longer used.

2010-01-11  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_relocate_functions::thumb32_branch_offset,
Arm_relocate_functions::thumb32_branch_upper,
Arm_relocate_functions::thumb32_branch_lower,
Arm_relocate_functions::thumb32_cond_branch_offset,
Arm_relocate_functions::thumb32_cond_branch_upper,
Arm_relocate_functions::thumb32_cond_branch_lower,
Arm_relocate_functions::thm_jump19): New methods to handle THUMB
branch offset encoding.
(Arm_relocate_functions::thumb_branch_common): Use new branch
offset encoding methods to avoid code duplication.
(Stub_template::Stub_template) Handle THUMB16_SPECIAL_TYPE.
(Stub_addend_reader::operator()): Use new branch encoding method
to avoid code duplication.

Fix -Wunused warning in dec-thread.c.

        * dec-thread.c (dec_thread_count_gdb_threads)
        (dec_thread_add_gdb_thread): Prevent -Wunused warning.

    * ada-valprint.c (ada_print_floating): Remove trailing space.

2010-01-11  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_relobj::do_gc_process_relocs): New method.
(Target_arm::do_finalize_sections): Define special EXIDX section
symbols only if referenced.
* gc.h (Garbage_collection::add_reference): New method.
(gc_process_relocs): Use Garbage_collection::add_reference to avoid
code duplication.

* script.cc (Version_script_info::build_expression_list_lookup):
Change complaing about duplicate wildcard match from error to
warning.

* script.cc (class Lazy_demangler): Recreate--revert part of patch
of 2009-12-30.
(Version_script_info::Version_script_info): Initialize globs_,
default_version_, default_is_global_, and exact_.  Don't
initialize globals_ or locals_.
(Version_script_info::build_lookup_tables): Build local symbols
first.
(Version_script_info::unquote): New function.
(Version_script_info::add_exact_match): New function.
(Version_script_info::build_expression_list_lookup): Remove lookup
parameter.  Add is_global parameter.  Change all callers.  Handle
wildcard pattern specially.  Unquote pattern.  Call
add_exact_match.
(Version_script_info::get_name_to_match): New function.
(Version_script_info::get_symbol_version): New function.
(Version_script_info::get_symbol_version_helper): Remove.
(Version_script_info::check_unmatched_names): Call unquote.
* script.h (class Version_script_info): Change get_symbol_version
to be non-inline and add is_global parameter; change all callers.
Rewrite symbol_is_local.  Update declarations.  Define struct
Version_tree_match, Exact, Globs.  Don't define struct Lookup.
Remove globals_ and locals_ members.  Add exact_, globs_,
default_version_, is_global_.
(Version_script_info::Glob): Remove pattern, add expression and
is_global.  Update constructor.  Change all callers.
* dynobj.cc (Versions::finalize): Mark the version symbol as the
default version.
(Versions::symbol_section_contents): If a symbol is undefined, or
defined in a dynamic object, set the version index to
VER_NDX_LOCAL.
* symtab.cc (Symbol_table::add_from_relobj): Don't call
symbol_is_local.
(Symbol_table::add_from_pluginobj): Likewise.
* testsuite/ver_matching_test.sh: blaza1 and blaza go into V2.

gdb/ChangeLog:

        Add support for DW_AT_GNAT_descriptive_type.
        * gdbtypes.h (enum type_specific_kind): New enum.
        (struct main_type) [type_specific_field]: New component.
        [type_specific]: Add new component "gnat_stuff".
        (struct gnat_aux_type): New type.
        (INIT_CPLUS_SPECIFIC): Also set TYPE_SPECIFIC_FIELD (type).
        (HAVE_CPLUS_STRUCT): Also check TYPE_SPECIFIC_FIELD (type).
        (gnat_aux_default, allocate_gnat_aux_type): Add declaration.
        (INIT_GNAT_SPECIFIC, ALLOCATE_GNAT_AUX_TYPE, HAVE_GNAT_AUX_INFO)
        (TYPE_SPECIFIC_FIELD): New macros.
        (TYPE_CPLUS_SPECIFIC): Return cplus_struct_default if the given
        type does not hold any cplus-specific data.
        (TYPE_RAW_CPLUS_SPECIFIC): New macro.
        (TYPE_GNAT_SPECIFIC, TYPE_DESCRIPTIVE_TYPE): New macros.
        (TYPE_IS_OPAQUE): Use HAVE_CPLUS_STRUCT to check if type has
        cplus-specific data.
        * gdbtypes.c (allocate_cplus_struct_type): Minor stylistic rewrite.
        Set new component TYPE_SPECIFIC_FIELD (type).
        (gnat_aux_default): New constant.
        (allocate_gnat_aux_type): New function.
        (init_type): Add initialization the type-specific stuff for
        TYPE_CODE_FLT and TYPE_CODE_FUNC types.
        (print_gnat_stuff): New function.
        (recursive_dump_type): Use HAVE_CPLUS_STRUCT to check for cplus-
        specific data.  Adjust code that prints the contents of the
        type-specific union using the TYPE_SPECIFIC_FIELD value.
        * dwarf2read.c (dwarf2_attach_fields_to_type): Do not allocate
        the type cplus stuff for Ada types.
        (dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
        Error out if these routines are called with an Ada type.
        (read_structure_type, read_array_type, read_subrange_type):
        Add call to set_descriptive_type.
        (set_die_type): Initialize the gnat-specific data if necessary.
        (need_gnat_info, die_descriptive_type, set_descriptive_type):
        New functions.
        * ada-lang.c (decode_constrained_packed_array_type): Use
        decode_constrained_packed_array_type instead of doing a standard
        lookup to locate a parallel type.
        (find_parallel_type_by_descriptive_type): New function.
        (ada_find_parallel_type_with_name): New function.
        (ada_find_parallel_type): Reimplement using
        ada_find_parallel_type_with_name.
        * ada-valprint.c (print_field_values): Use HAVE_CPLUS_STRUCT
        to check if type has a cplus stuff.
        * linespec.c (total_number_of_methods): Likewise.
        * mdebugread.c (new_type): Likewise.

gdb/testsuite/ChangeLog:

        * gdb.base/maint.exp: Adjust the expected output for the
        "maint print type" test. Use gdb_test_multiple instead of
        gdb_sent/gdb_expect.

PR 11122
* listing.c (print_source): Add one to line number.

* lib/gdbserver-support.exp (gdbserver_download_current_prog): Rename
from gdbserver_download.  All callers updated.

* gdb.server/ext-run.exp: "info os processes" requires xml support.

*** empty log message ***

daily update

2010-01-11  Doug Kwan  <dougkwan@google.com>

* Makefile.am (incremental_dump_DEPENDENCIES): Add libintl dependency.
(incremental_dump_LDADD): Add linking option for libintl.
* Makefile.in: Regenerate.

gdb/
* NEWS: Document the 0b binary number prefix parsing.

merge from gcc

Use --dyn-syms instead of -Ds

2010-01-11  H.J. Lu  <hongjiu.lu@intel.com>

PR gold/11144
* testsuite/Makefile.am (dynamic_list.stdout): Use --dyn-syms
instead of -Ds.
* testsuite/Makefile.in: Regenerated.

gdb/
* objfiles.c (objfile_relocate1): Change the return type to int.
Describe the new return value.  Return non-zero if data changed.
(objfile_relocate): New variable changed.  Set it.  Call
breakpoint_re_set depending on CHANGED.

gdb/
Implement binary numbers parsing.
* c-exp.y (parse_number): New case 'b' and 'B'.

gdb/testsuite/
Implement binary numbers parsing.
* gdb.base/printcmds.exp (test_integer_literals_accepted)
(test_integer_literals_rejected): New binary tests.

gdb/
* solib.c (info_sharedlibrary_command): Replace
objfile_has_partial_symbols and objfile_has_full_symbols calls by
objfile_has_symbols.

2010-01-11  Tristan Gingold  <gingold@adacore.com>

* mach-o.h: Add x86-64 relocation types.

2010-01-11  Tristan Gingold  <gingold@adacore.com>

* mach-o.h (bfd_mach_o_backend_data): Add arch field.
(bfd_mach_o_set_arch_mach): New prototype.
* mach-o.c (bfd_mach_o_mkobject): Define with bfd_mach_o_gen_mkobject.
(bfd_mach_o_set_arch_mach): New function.
(bfd_mach_o_gen_mkobject): New function.
Set TARGET_ARCHITECTURE for the generic back-ends.
* mach-o-target.c (bfd_mach_o_set_arch_mach): Remove define.
Check that TARGET_ARCHITECTURE is defined.
Add TARGET_ARCHITECTURE in TARGET_NAME_BACKEND structure.
* mach-o-i386.c (TARGET_ARCHITECTURE): Define.

2010-01-11  Tristan Gingold  <gingold@adacore.com>

        * archive.c (bfd_slurp_armap): Also check for Mach-O sorted armap.

Add --dyn-syms to readelf

binutils/

2010-01-11  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/11146
* NEWS: Mention --dyn-syms for readelf.

* readelf.c (do_dyn_syms): New.
(OPTION_DYN_SYMS): Likewise.
(options): Add "dyn-syms".
(usage): Add --dyn-syms.
(parse_args): Handle OPTION_DYN_SYMS.
(process_symbol_table): Handle do_dyn_syms.
(process_object): Likewise.
(process_archive): Likewise.

* doc/binutils.texi: Document --dyn-syms for readelf.  Mention
symbol hash tables for -D.

ld/testsuite/

2010-01-11  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/11146
* ld-elf/dynsym1.d: New.

    * elf32-v850.c (v850_elf_perform_relocation): Fix overflow
        handling of R_V850_HI16_S relocation.

    * NEWS: Mention addition of elfedit.