avahi: add optional dbus-python support

Without this, the python support doesn't do anything.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gcc: set e5500 and e6500 version mask

Freescale e5500 and e6500 cores are supported for versions >= 4.8
So filter out all of the older versions to avoid build failures.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/powerpc: add fsl e5500 and e6500 support

Add Freescale E5500 and E6500 core support.
These can go in 32 or 64-bit mode.
I'm not aware of these being able to boot in LE mode so filter that out
until we get some feedback on it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Matt Weber" <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/network-manager: Enable service under systemd

Previously NetworkManager had to be enabled and started on the
first boot manually or by a script.

Add install define with the commands to setup the required
service files for automatic start.

Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pam: new package

Upstream is no longer available, so get the tarball + important patches from
Fedora.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-psutil: new package

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-alsaaudio: new package

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-enum34: new package

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-ipaddr: new package

The functionality is included in python3 as the ipaddress module, so make it
python2 only.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: add CodeSourcery MIPS 2014.11, remove 2013.05

- Add CodeSourcery MIPS 2014.11 toolchain
- Remove CodeSourcery MIPS 2013.05 toolchain
- Update the hash file

Toolchain datasheet:
  https://sourcery.mentor.com/GNUToolchain/release2935?@template=datasheet

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: fix the help message for CodeSourcery MIPS

- Fix the help message for CodeSourcery MIPS toolchains
- Add a hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/script/scancpan: fix corelist check

module could be removed of the core,
so check if the module is currently in the core,
but not if the module was once time included in the core.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add sample for freescale p2020ds

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/at91bootstrap3: bump to v3.7.1

Change to use the _defconfig targets of at91bootstrap3 build system
when a defconfig is used.

[Thomas: adjust to make a better use of at91bootstrap3 defconfig
mechanism.]

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgpgme: bump version to 1.5.2

- Bump version to 1.5.2
- Add a hash file

[Thomas: fix typo in commit title.]

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pinentry: bump version to 0.9.0

- Bump version to 0.9.0
- Add a hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libassuan: bump version to 2.1.3

- Bump version to 2.1.3
- Update the hash value

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libz160: fix dependencies

libz160 is provided as binary. We need EABI toolchain with glibc to use
it.

[Thomas: adjust dependency comment according to Yann suggestions.]

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/wpa_supplicant: Add patch to fix build error with musl

Add a patch to allow building wpa_supplicant with the musl C library.

Building wpa_supplicant with the musl C library fails since musl does not
define type names such as '__uint32_t'. To support building wpa_supplicant
with the musl C library use the integer types declared in the ISO C standard
header file <stdint.h>.

Patch is sent upstream:
http://lists.shmoo.com/pipermail/hostap/2014-December/031464.html

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

exiv2: add patch to fix build error with some toolchains

This patch remove a header inclusion that is not required an can create
build error with some toolchains.
The patch is pushed on the upstream for the next release.
http://dev.exiv2.org/issues/1007

Fixes:
http://autobuild.buildroot.net/results/09d/09d9b525eeee458247e10a7948070c00bbabb964/

Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xserver_xorg-server: disable libunwind on MIPS with 32-bit pointers

libunwind support in xorg-server is not only broken for MIPS64 n32 but
for all MIPS variants with 32-bit pointers. The reason is exactly the
same one. libunwind defines a uint64 variable to store the words. Then,
xorg-server casts that variable (64-bit) into a pointer (32-bit), and
the compilation fails:

backtrace.c:98:13: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]

Related:
  https://bugs.freedesktop.org/show_bug.cgi?id=79939

Fixes:
  http://autobuild.buildroot.net/results/87b/87be2c95957f9925c1258812e536df72689fc5da/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-download: fix arguments to hash checking script

The argument are correctly used, but incorrectly documented.
Inverse the comments to match the actual usage.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs/ext2: add option to specify a filesystem label

Filesystems of the ext familly can carry a filesystem label.
Add an option for the user to specify such a label.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Károly Kasza <kaszak@gmail.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs/ext2: use the new mke2img host package

And get rid of the old genext2fs.sh wrapper.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mke2img: new package

Currently, we are using a shell script called genext2fs, that
impersonates the real genext2fs. But that script does much more than
just call genextfs: it also calls tune2fs and e2fsck.

Because it impersonates genext2fs, we can not easily add new options,
and are constrained by the genext2fs options.

But it turns out that, of all the options supported by the real
genext2fs, we only really care for a subset, namely:
  - number of blocks
  - number of inodes
  - percentage of blocks reeserved to root
  - the root directory which to generate the image from

So, we introduce a new host package, mke2img, that is intended to
eventually replace genext2fs.sh.

This new script is highly modeled from the existing genext2fs.sh, but
was slightly refreshed, and a new, supposedly sane set of options has
been choosen for the features we need (see above), and some new options
were added, too, rather than relying on the arguments order or
environment variables:
  -b <nb-blocks>    number of blocks in the filesystem
  -i <nb-inodes>    number of inodes in the filesystem
  -r <pc-reserved>  percentage of reserved blocks
* -d <root-dir>     directory containing the root of the filesystem
* -o <img-file>     output image file
  -G <ext-gen>      extfs generation: 2, 3, or 4 (default: 2)
  -R <ext-rev>      ext2 revision: 0 or 1 (default 1)
  -l <label>        filesystem label
  -u <uid>          filesystem UUID; if not specified, a random one is used

* Mandatory options

Since the upstream e2fsprogs are expected to release a new mke2fs that
will be able to generate a filesystem image from a directory, we then
will be able to replace all the logic in mke2img, to use mke2fs instead
of the (relatively fragile) combination of the three tools we currently
use.

An entry is added for it in the "Host utilities" menu, so it can be
selected for use by post-{build,image} scripts. The ext2 filesystem
selection is changed to select that now.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/binutils: fix comment dependencies

[Thomas: re-adjust dependencies, according to Yann's comment.]

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-webpy: depend on Python 2.x only

webpy is still not ported to Python 3, so enable only for Python 2.

Fixes:

 http://autobuild.buildroot.org/results/e6b/e6bdb8e0ab6daa027a01507861ecde47338a11a8/

[Thomas: add autobuilder reference.]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/minidlna: disable broken toolchains on nios2

minidlna triggers the _gp bug:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/77875/

Fixes
http://autobuild.buildroot.net/results/712/71230ee530a41b3611cd4526f0f010f9c2ef25eb/
http://autobuild.buildroot.net/results/79c/79cbae4dab3ad712bc20c752fdd91e168eade9fe/
http://autobuild.buildroot.net/results/df7/df7da91985a7bf2b05093bae7379ef22362a44fc/
and many others

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dhcp: Only install the relevant unit file

Previous to this patch, if BR2_PACKAGE_DHCP_CLIENT was selected,
dhcpd.service was installed to the target on systemd systems.

On the resultant system, this would mean that systemctl would
show an error starting dhcpd.service, as the requisite files
do not exist. This does not cause issue on sysvinit systems
as the init scripts silently error when the files aren't found.

Fix this by adding a conditional check to the install define.

Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs: fix typo in cmake-package documentation

The cmake-package documentation was referring to
BR2_PREFER_STATIC_LIBS, while the option is actually named
BR2_PREFER_STATIC_LIB. This commit fixes this mistake.

Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

qtuio: add error handling to for loop

Also remove unneeded sub-shell usage in the build and installation
steps. It is kept for the configure step as it is actually useful, and
works fine because "|| exit 1" is outside the sub-shell.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

w_scan: bump version to 20141122

- Bump version to 20141122
- Add a hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

btrfs-progs: bump to version 3.17.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: document the new patch naming convention

To ease generating patches, we now use a naming convention that is in
line with what git-format-patch does, that is:
  - do not prefix patches with the package name
  - prefix patches with a 4-digit mber
  - start numbering at 0001

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pacakge/freerdp: disable building the manpages

Building the manpages requires xsltproc, which might not be available.
Also, who needs the manpages on the target anyway? ;-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libv4l: bump to version 1.6.2

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nginx: disallow AIO support on arc

The nginx AIO support cannot build on arc, because it hardcodes
the usage of SYS_eventfd(), while it should just use eventfd() from
the C library.

Fixes:
  http://autobuild.buildroot.org/results/f3e/f3e2c7a937517a5444f8c6cc0b02692af897b3e0/

[Thomas: adjust comment as suggested by Yann.]

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevdev: bump version to 1.3.2

See [1] for details.

[1] http://lists.freedesktop.org/archives/input-tools/2014-December/001132.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rp-pppoe: install helper scripts

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fconfig: add hash file

Add locally computed hash file for fconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fconfig: remove redundant CFLAGS/LDFLAGS

CFLAGS and LDFLAGS are already passed as part of
$(TARGET_CONFIGURE_OPTS).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fconfig: change upstream site

The upstream site is dead, used http://sources.buildroot.net
temporarly.

Fixes:

  http://autobuild.buildroot.org/results/778/77899f882e04121ca5f2b96f0df9f24ead26d12b/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/tvheadend: Rework CFLAGS handling for liburiparser

Suggested by Thomas:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/100646

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libnss: need dynamic library support

Fixes:
  http://autobuild.buildroot.net/results/e01733c4b8c23f62e2081f0c4aadc16e22c4a2c4/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rp-pppoe: install default conf file

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ffmpeg: Add ffprobe option

Signed-off-by Stephen M. Kenton <skenton@ou.edu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: add python-gobject

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

netatalk: bump to version 3.1.7

Rename patch to new standard and add hash file as well.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/lxc: disable broken toolchains on nios2

As discussed with Thomas
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/100998
only the current toolchains are broken:
"it's better to blacklist the individual toolchains that are known
to be broken, so that if we add another toolchain, we will be able
to see if the same bug happens as well or not."

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/crda: disable broken toolchains on nios2

As discussed with Thomas
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/100998
only the current toolchains are broken:
"it's better to blacklist the individual toolchains that are known
to be broken, so that if we add another toolchain, we will be able
to see if the same bug happens as well or not."

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/aiccu: disable broken toolchains on nios2

As discussed with Thomas
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/100998
only the current toolchains are broken:
"it's better to blacklist the individual toolchains that are known
to be broken, so that if we add another toolchain, we will be able
to see if the same bug happens as well or not."

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xlib_libXau: add host-pkgconf to its dependencies

xlib_libXau needs pkg-config during the configure phase. Otherwise it
will fail with an error like this one:

checking for XAU... configure: error: in
`/br/output/build/xlib_libXau-1.0.8':
configure: error: The pkg-config script could not be found or is too
old.  Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nginx: remove rtsig module support

rtsig module uses the deprecated sysctl syscall, which is not
implemented on some recent architecture (such as arc).

Also, rtsig module is almost considered as deprecated by some nginx
developers [1].

So, just remove this option.

Fixes:
  http://autobuild.buildroot.org/results/730/730105fc0a89b381b3b29192d07f28ef1f13cbb3/

[1] http://mailman.nginx.org/pipermail/nginx-devel/2014-November/006295.html

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nginx: rename patch to new convention

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bdwgc: fix _ARCH_SUPPORTS kconfig warning

We have to define it as a bool, otherwise kconfig complains with:

package/bdwgc/Config.in:1:warning: config symbol defined without type

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/flac: fix patch file extension

Fixes:
  http://autobuild.buildroot.org/results/c22/c22f29fd787a3d12d86cc3cd3e2d9c8688d2f65d/
  http://autobuild.buildroot.org/results/1f8/1f824e3aa17fb17e7efe3e4c1636974fea79c1f9/
  http://autobuild.buildroot.org/results/8ad/8ad965fbc19e22d3f43899cb5efb42626fa2f55e/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dejavu: add hashes from project site

[Peter: drop locally computed sha1sum]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-flask: fix s/flash/flask/ _DEPENDENCIES typo

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs: RWD website - upgrading bootswatch theme file

This patch updates to the latest bootstrap versione (3.3.0) and
contextually pushes the colour theme and fonts required by
our style. The patch provides source files (*.less) to
recompile bootstrap.min.css .

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

exiv2: XMP support needs largefile

XMP code enables largefile unconditionally.

Fixes:
http://autobuild.buildroot.net/results/116/1166068a64733d22a2f891849177ad826347dc9f/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tcpdump: add security fix patch

Fixes CVE-2014-9140, PPP dissector vulnerability.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.4.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysstat: bump to version 11.0.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dialog: bump to version 1.2-20140911

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

live555: fix test programs target installation

Commit 43ebd93e1fcb (live555: add error handling to for loop) removed the
shell command delimiter. Add it back.

Fixes:
http://autobuild.buildroot.net/results/00f/00f26fa3b6fc8c707009f44ede7b680849f18d5f/

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

live555: fix shared library build on x86

-fPIC is required for shared libraries on x86.

Fixes:
http://autobuild.buildroot.net/results/6e7/6e78d3e29856c25d233f1629c31bc15f7ecb2f89/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openvpn: CVE-2014-8104: bump to version 2.3.6

see
https://community.openvpn.net/openvpn/wiki/SecurityAnnouncement-97597e732b

Signed-off-by: Fabian Mewes <architekt@coding4coffee.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bdwgc: only enable on supported architectures

bdwgc has support for a sub-set of the architectures we support.

Since there is roughly a 50-50 split of our architectures that have
support in bdwgc vs. those that do not, use a positive dependency logic,
rather than a negative one.

The list was constructed by visual inspection of the source code of
bdwgc, but the header doing the check is, to say it politely, a bit
difficult to read...

So, some working archotectures may be missing. Users needing it may
investigate if their architectures are indeed supported.

Fixes;
    http://autobuild.buildroot.net/results/529/529b0b6dd47744c13f56e59a4c669a3f5d56530d/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Pedro Aguilar <paguilar@paguilar.org>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ffmpeg: bump version to 2.4.4

- Bump version to 2.4.4.
- Remove upstreamed patch
- Add a hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysklogd: fix redundant newline escape

Broken since 428f1e7e70c6b (sysklogd: install configuration file
unconditionally). Fixes:

package/sysklogd/sysklogd.mk:21: *** missing 'endef', unterminated 'define'.  Stop.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

proftpd: remove redundant newline escape

Broken since 0e18b0a4e12e7 (proftpd: install configuration file
unconditionally). Fixes the following make error:

package/proftpd/proftpd.mk:49: *** missing 'endef', unterminated 'define'.  Stop.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ifplugd: remove spurious newline escape

Commit 5ad5d55924bcc (ifplugd: install configuration files unconditionally)
removed the conditional configuration file install, but left an redundant
newline escape, causing the following error:

package/ifplugd/ifplugd.mk:23: *** missing 'endef', unterminated 'define'.  Stop.

Fix this.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: use install -m as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

inadyn: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: use install -D]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

usbmount: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: fix indentation as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

screen: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysklogd: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ifplugd: install configuration files unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: use install -m as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

logrotate: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

samba: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

proftpd: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fluxbox: install session file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

input-event-daemon: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

stunnel: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

transmission: install init script unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rsyslog: install init script and config file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Also, we take this opportunity to rename RSYSLOG_INSTALL_CONF_SCRIPT
to RSYSLOG_INSTALL_CONF because it is no longer installing an init
script.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpcbind: install init script unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lighttpd: install configuration files with sensible (0644) permissions

And use the same (0-prefixed) form everywhere.

Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lighttpd: install init script and config file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iucode-tool: install init script unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dmraid: install init script unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: install init script and config file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: drop && conditional from watchdog installation as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

aiccu: install init script and config file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xenomai: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sound-theme-borealis: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lockfile-progs: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

live555: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jimtcl: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>