Adam Duskett [Wed, 6 Feb 2019 09:15:26 +0000 (04:15 -0500)]
package/binutils: install libiberty for host build
Add --enable-install-libiberty to HOST_BINUTILS_CONF_OPTS to allow
prelink-cross to build properly.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Vadim Kochan [Fri, 1 Mar 2019 12:33:42 +0000 (14:33 +0200)]
utils/test-pkg: generate package config if it is not specified
It is possible to generate one-line config for the package just by
normalize it to the form:
BR2_PACKAGE_${pkg_replaced-to_and_uppercase}
it simplifes a bit of testing package where no additional config options
are needed.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Wed, 6 Mar 2019 15:24:26 +0000 (16:24 +0100)]
package/libump: remove package
This library was previously a part of sunxi-mali.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Wed, 6 Mar 2019 15:24:25 +0000 (16:24 +0100)]
package/sunxi-mali: remove package
The package sunxi-mali-mainline is available for recent kernels.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Wed, 6 Mar 2019 15:24:24 +0000 (16:24 +0100)]
configs/olimex_a20_olinuxino_lime_legacy: remove defconfig
The old 3.4 Linux kernel used by this defconfig doesn't build with gcc
7.x.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sat, 9 Mar 2019 14:51:25 +0000 (15:51 +0100)]
package/imagemagick: disable locale with uclibc
Fixes:
- http://autobuild.buildroot.org/results/
f7be30ffa28b7f367fb5343a7d69dc8bc7c3a170
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Tue, 12 Mar 2019 22:35:25 +0000 (23:35 +0100)]
package/glibc: bump to version 2.29
Changes to build and runtime requirements:
* Python 3.4 or later is required to build the GNU C Library.
* On most architectures, GCC 5 or later is required to build the GNU C
Library. (On powerpc64le, GCC 6.2 or later is still required, as
before.)
While at it, remove the double "glibc-" prefix in the version.
https://www.sourceware.org/ml/libc-alpha/2019-01/msg00723.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Tue, 12 Mar 2019 22:35:24 +0000 (23:35 +0100)]
support/dependencies: add a check for python3
Since version 2.29, glibc requires python 3.4 or later to build the
GNU C Library [1].
We add a new check to verify the version of python3 interpreter
installed on the host. If no suitable python3 interpreter is found,
define BR2_PYTHON3_HOST_DEPENDENCY to add host-python3 in package
dependencies when needed.
[1] https://www.sourceware.org/ml/libc-alpha/2019-01/msg00723.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: drop not so useful comment in the .mk file, as suggested by
Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 15 Mar 2019 21:07:09 +0000 (22:07 +0100)]
package/python-tornado: bump to version 6.0.1
Remove patch (not needed since:
https://github.com/tornadoweb/tornado/commit/
fa6a7ff6056fc8b139e51294095050f68076f850)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Martin Bark [Thu, 14 Mar 2019 13:38:13 +0000 (13:38 +0000)]
package/nodejs: use shared nghttp2 library
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Martin Bark [Thu, 14 Mar 2019 13:38:12 +0000 (13:38 +0000)]
package/nghttp2: bump version to 1.37.0
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Martin Bark [Thu, 14 Mar 2019 13:38:11 +0000 (13:38 +0000)]
package/nodejs: bump version to 10.15.3
See https://nodejs.org/en/blog/release/v10.15.3/
The host tool "torque" is unfortunately not built by complying to our
LDFLAGS, so it is not built with the proper RPATH. We fix that using
patchelf, and install it to $(HOST_DIR) to make it available during
the build of the target nodejs.
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas:
- add explanation in the commit log about torque
- install torque in $(HOST_DIR)/bin and not $(HOST_DIR)/usr/bin]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 15 Mar 2019 20:56:58 +0000 (21:56 +0100)]
package/python-watchdog: bump to version 0.9.0
- Remove patch (already in version:
https://github.com/gorakhargosh/watchdog/commit/
268a46dabc10ff8dcc5a123ca8c8ceb2e9189f2a)
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 15 Mar 2019 07:54:54 +0000 (08:54 +0100)]
package/optee-benchmark: needs fork
Fixes:
- http://autobuild.buildroot.org/results/
ea61442275d1790a29e02e2fa27f072e4c12daa7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 15 Mar 2019 07:41:42 +0000 (08:41 +0100)]
package/ulogd: add --with-sqlite option
Use --with-sqlite and --without-sqlite options
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 15 Mar 2019 07:34:43 +0000 (08:34 +0100)]
package/ulogd: fix musl build
Fixes:
- http://autobuild.buildroot.org/results/
26fefd491a8a313c12d62c5f522ddfd48decf6c9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Baruch Siach [Fri, 15 Mar 2019 09:22:04 +0000 (11:22 +0200)]
package/nodejs: requires gcc 4.9
BUILDING.md lists gcc 4.9.4 or newer as build prerequisite. This is
needed for full C++11 support.
https://github.com/nodejs/node/commit/
d13a65ad68c429884434cdcd94c52b79a6d69717
Cc: Daniel Price <daniel.price@gmail.com>
Reported-by: Boris-Ben Shapiro <erectcrested@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asaf Kahlon [Fri, 15 Mar 2019 10:40:46 +0000 (12:40 +0200)]
package/python-psutil: bump to version 5.6.1
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Norbert Lange [Fri, 15 Mar 2019 12:32:13 +0000 (13:32 +0100)]
package/xenomai: bump to version 3.0.8
remove upstream patch.
Signed-off-by: Norbert Lange <norbert.lange@andritz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:06:59 +0000 (19:06 +0100)]
package/mesa3d: bump version to 19.0.0
We keep using autotools and switch to meson in a later patch after
upstream deprecated autotools:
https://lists.freedesktop.org/archives/mesa-announce/2019-March/000501.html
Imx winsys was removed:
https://cgit.freedesktop.org/mesa/mesa/commit/?h=19.0&id=
41a0acd6a149ec9f47ea527ad08a2b29bf1ee6b2
Patch 0004 removed, applied upstream.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 17:59:58 +0000 (18:59 +0100)]
package/samba4: security bump to version 4.9.5
Release notes: https://www.samba.org/samba/history/samba-4.9.5.html
Fixes CVE-2019-3824:
ldb: Out of bound read in ldb_wildcard_compare
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 17:49:12 +0000 (18:49 +0100)]
package/openvpn: bump version to 2.4.7
Quoting https://openvpn.net/community-downloads/
"This is primarily a maintenance release with bugfixes and improvements.
One of the big things is enhanced TLS 1.3 support."
Release notes:
https://github.com/OpenVPN/openvpn/commit/
2b8aec62d5db2c17d5d4052991bc18272748bf29
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 15 Mar 2019 15:46:10 +0000 (16:46 +0100)]
package/python-nfc: bump to version 0.13.5
- Switch site to github
- Add python-nfc.hash
- Add license file and its hash
- Remove patch (not needed anymore)
- Switch to setuptools (instead of distutils)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:04:12 +0000 (19:04 +0100)]
package/libvdpau: bump version to 1.2
Added all hashes provided by upstream and license hash.
Removed patch 0001, applied upstream
https://gitlab.freedesktop.org/vdpau/libvdpau/commit/
1cda354bdfd0c9ca107293b84b52f4464fdbedcc
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:56 +0000 (19:02 +0100)]
package/x11r7/xlib_libfontenc: bump version to 1.1.4
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:55 +0000 (19:02 +0100)]
package/x11r7/xlib_libXdamage: bump version to 1.1.5
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:54 +0000 (19:02 +0100)]
package/x11r7/xlib_libXcursor: bump version to 1.2.0
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:53 +0000 (19:02 +0100)]
package/x11r7/xlib_libXcomposite: bump version to 0.4.5
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:52 +0000 (19:02 +0100)]
package/x11r7/xlib_libXau: bump version to 1.0.9
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:51 +0000 (19:02 +0100)]
package/x11r7/xlib_libFS: bump version to 1.0.8
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:50 +0000 (19:02 +0100)]
package/x11r7/xdriver_xf86-video-tdfx: bump version to 1.5.0
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:49 +0000 (19:02 +0100)]
package/x11r7/xdriver_xf86-video-intel: bump version
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:48 +0000 (19:02 +0100)]
package/x11r7/xdriver_xf86-video-ati: bump version to 19.0.0
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:47 +0000 (19:02 +0100)]
package/x11r7/xdriver_xf86-video-amdgpu: bump version to 19.0.0
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:46 +0000 (19:02 +0100)]
package/x11r7/xdriver_xf86-input-libinput: bump version to 0.28.2
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:45 +0000 (19:02 +0100)]
package/x11r7/xdata_xcursor-themes: bump version to 1.0.6
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:44 +0000 (19:02 +0100)]
package/x11r7/xapp_xvinfo: bump version to 1.1.4
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:43 +0000 (19:02 +0100)]
package/x11r7/xapp_xstdcmap: bump version to 1.0.4
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:42 +0000 (19:02 +0100)]
package/x11r7/xapp_xrdb: bump version to 1.2.0
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:41 +0000 (19:02 +0100)]
package/x11r7/xapp_xprop: bump version to 1.2.4
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:40 +0000 (19:02 +0100)]
package/x11r7/xapp_xmore: bump version to 1.0.3
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:39 +0000 (19:02 +0100)]
package/x11r7/xapp_xmodmap: bump version to 1.0.10
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:38 +0000 (19:02 +0100)]
package/x11r7/xapp_xlsatoms: bump version to 1.1.3
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:37 +0000 (19:02 +0100)]
package/x11r7/xapp_xlogo: bump version to 1.0.5
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:36 +0000 (19:02 +0100)]
package/x11r7/xapp_xinit: bump version to 1.4.1
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:35 +0000 (19:02 +0100)]
package/x11r7/xapp_xhost: bump version to 1.0.8
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:34 +0000 (19:02 +0100)]
package/x11r7/xapp_xfsinfo: bump version to 1.0.6
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:33 +0000 (19:02 +0100)]
package/x11r7/xapp_xfd: bump version to 1.1.3
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:32 +0000 (19:02 +0100)]
package/x11r7/xapp_xev: bump version to 1.2.3
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:31 +0000 (19:02 +0100)]
package/x11r7/xapp_xditview: bump version to 1.0.5
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:30 +0000 (19:02 +0100)]
package/x11r7/xapp_xclock: bump version to 1.0.8
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:29 +0000 (19:02 +0100)]
package/x11r7/xapp_xcalc: bump version to 1.0.7
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:28 +0000 (19:02 +0100)]
package/x11r7/xapp_bitmap: bump version to 1.0.9
Added all hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 15 Mar 2019 18:02:27 +0000 (19:02 +0100)]
package/x11r7/xserver_xorg-server: bump version to 1.20.4
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 8 Mar 2019 21:52:00 +0000 (22:52 +0100)]
package/gerbera: fix static build with curl and libidn2
Fixes:
- http://autobuild.buildroot.org/results/
be5893b507d22a23951efeea20c18642742cef5a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
James Hilliard [Sun, 24 Feb 2019 03:35:22 +0000 (11:35 +0800)]
package/python-aiohttp-cors: new package
CORS support for aiohttp.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 1 Mar 2019 20:18:18 +0000 (21:18 +0100)]
package/beecrypt: fix build without C++
Do not check for C++ compiler as C++ support has been disabled since
commit
dd4d3c18d6753e1224fbe59d91a4b44f39bc38c0 otherwise
build will fail on toolchains without a working C++ compiler:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: in `/data/buildroot/buildroot-test/instance-1/output/build/beecrypt-4.2.1':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
Fixes:
- http://autobuild.buildroot.org/results/
3c79cc68f1b088ad24daf7f9bd70718d702be577
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Norbert Lange [Wed, 6 Mar 2019 16:33:16 +0000 (17:33 +0100)]
package/musl: remove rcrt1.o from target installation
Signed-off-by: Norbert Lange <norbert.lange@andritz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Etienne Carriere [Fri, 8 Mar 2019 09:55:09 +0000 (10:55 +0100)]
package/optee-*: support BR2_STATIC_LIBS=y
Patch current optee-client 3.4.0 to support building resources
with static linkage of executable binaries with the user libraries.
The optee-client patch is under review in the OP-TEE project [1] and
should be merged in the next OP-TEE release 3.5.0.
This change drops !BR2_STATIC_LIBS constraint on package optee-client
and its dependent packages that are optee-benchmark, optee-examples,
and optee-test.
[1] https://github.com/OP-TEE/optee_client/pull/147
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sat, 9 Mar 2019 19:59:00 +0000 (20:59 +0100)]
package/stella: fix build with PAGE_SIZE
Fixes:
- http://autobuild.buildroot.org/results/
22a9b009749af2a0862750a1fb2b2dc7167cd589
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adam Duskett [Thu, 14 Mar 2019 21:31:31 +0000 (17:31 -0400)]
package/systemd: fix patch series order
With the removal of old patches, 0018 should be 0002 and 0019 should be 0003.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 14 Mar 2019 21:20:59 +0000 (22:20 +0100)]
package/ulogd: use --without-dbi
Use --without-dbi instead of --with-dbi=off
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 14 Mar 2019 21:20:58 +0000 (22:20 +0100)]
package/ulogd: use --without-mysql
Replace --with-mysql=no by --without-mysql
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adam Duskett [Thu, 14 Mar 2019 21:29:30 +0000 (17:29 -0400)]
package/systemd: fix patch 0019
This patch was backported to work with systemd v240. Now that systemd
is at v241, we must update the patch.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Thompson [Fri, 8 Mar 2019 18:33:39 +0000 (18:33 +0000)]
package/qt5/qt5virtualkeyboard: install shared library
Between Qt 5.11 and 5.12 the virtual keyboard package gained a new
top-level library, libQt5VirtualKeyboard.so, which is then used by all
of the plugins it installs. This change makes Buildroot aware of the
new library so that we install it to the target filesystem.
Signed-off-by: Mark Thompson <mark.thompson@starleaf.com>
[Thomas: move the definition of QT5VIRTUALKEYBOARD_INSTALL_TARGET_LIBS
into a separate condition]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Tue, 12 Mar 2019 23:08:39 +0000 (00:08 +0100)]
package/binutils: remove version 2.29
We are back with 3 binutils version in Buildroot.
Now CFI support is always present for NIOSII.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Tue, 12 Mar 2019 23:08:38 +0000 (00:08 +0100)]
package/binutils: remove version 2.28
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Tue, 12 Mar 2019 23:08:37 +0000 (00:08 +0100)]
package/binutils: remove special case version selection for ARM Thumb
Binutils 2.29 and 2.30 are affected by a bug in ADR and ADRL
pseudo-instruction [1] that was fixed in Binutils 2.31 [2].
* The ADR and ADRL pseudo-instructions supported by the ARM assembler
now only set the bottom bit of the address of thumb function symbols
if the -mthumb-interwork command line option is active.
Due to this issue, we were default to binutils 2.28 for ARM Thumb. But
now that the issue has been fixed in binutils 2.31 and that this
version is the default, the special casing to use 2.28 is no longer
needed.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=21458
[2] https://sourceware.org/ml/binutils/2018-07/msg00213.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Tue, 12 Mar 2019 23:08:36 +0000 (00:08 +0100)]
linux: update the comment about thumb issue with Binutils 2.29 and 2.30
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Tue, 12 Mar 2019 23:08:35 +0000 (00:08 +0100)]
package/binutils: switch to use 2.31.x as the default version
Now that binutils 2.32 has been released, it is time to move to
binutils 2.31.x as the default binutils version, instead of 2.29.1.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Tue, 12 Mar 2019 21:48:46 +0000 (22:48 +0100)]
package/systemd: use util-linux' agetty, drop patch
We currently have a patch that replaces the use of (hard-coded) agetty
in systemd, to use just plain getty. That patch dates back to commit
f4a5eed474c (Add the systemd package), when util-linux was not a
dependency, and we relied on busybox to actually provide getty.
But nowadays, util-linux is a mandatory dependency of systemd anyway.
agetty is about 42KiB, while busybox' getty is around 5KiB (give or
take). That's an extra ~40KiB, but it has to be balanced against the
rest of the system: systemd only runs on a glibc system, needs dbus and
thus expat, and kmod, that a ~40KiB overhead is barely noticeable (a
miminal systemd setup with nothing enabled, on ARM, is already ~20MiB)
So, drop our agetty-dropping patch, and forcibly enable agetty in
util-linux.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Arnout Vandecappelle (Essensium/Mind) [Wed, 6 Mar 2019 21:28:15 +0000 (22:28 +0100)]
linux{, -headers}: support downloads of v5+
With the arrival of linux v5.0, we need yet another condition to set
_SITE correctly. Instead of continuing this madness, solve the problem
generically: use v2.6 for 2.6.*, and use the number before the first dot
in the other cases.
While we're at it, remove the comment which has been incorrect since
80d7b68167a5c8893e906ace6b5f0b0166336406 (7 years ago).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Arnout Vandecappelle (Essensium/Mind) [Wed, 6 Mar 2019 21:28:14 +0000 (22:28 +0100)]
package/linux-headers: fix support for -rc kernels
-rc kernels after v3.x are no longer available in the testing
subdirectory. Instead they should be fetched from cgit.
Commit
ff4cccbdcf5417a5a8c251ff302791a306023cc1 did this for linux
itself, now we also do it for linux-headers.
When fetched from cgit, .tar.xz can't be used. Adding this to the
existing condition is not so simple, so refactor how _SOURCE is set:
simply set it explicitly in each branch of the condition. While more
verbose (it is repeated 4 times), it's easier to understand and to
maintain.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adam Duskett [Tue, 26 Feb 2019 20:28:12 +0000 (15:28 -0500)]
package/systemd: bump version to 241
In addition:
- Remove patches that have been committed upstream.
- Update hash for the README file. (Meson and Dbus dependency version updates)
./support/testing/run-tests -d dl -o output -k tests.init.test_systemd
14:18:20 TestInitSystemSystemdRwNetworkd Starting
14:18:21 TestInitSystemSystemdRwNetworkd Building
14:26:20 TestInitSystemSystemdRwNetworkd Building done
14:27:01 TestInitSystemSystemdRwNetworkd Cleaning up
.14:27:01 TestInitSystemSystemdRwIfupdown Starting
14:27:01 TestInitSystemSystemdRwIfupdown Building
14:28:35 TestInitSystemSystemdRwIfupdown Building done
14:29:03 TestInitSystemSystemdRwIfupdown Cleaning up
.14:29:03 TestInitSystemSystemdRwFull Starting
14:29:04 TestInitSystemSystemdRwFull Building
14:44:35 TestInitSystemSystemdRwFull Building done
14:45:18 TestInitSystemSystemdRwFull Cleaning up
.14:45:18 TestInitSystemSystemdRoNetworkd Starting
14:45:19 TestInitSystemSystemdRoNetworkd Building
14:55:59 TestInitSystemSystemdRoNetworkd Building done
14:56:23 TestInitSystemSystemdRoNetworkd Cleaning up
.14:56:23 TestInitSystemSystemdRoIfupdown Starting
14:56:24 TestInitSystemSystemdRoIfupdown Building
15:06:42 TestInitSystemSystemdRoIfupdown Building done
15:07:09 TestInitSystemSystemdRoIfupdown Cleaning up
.15:07:09 TestInitSystemSystemdRoFull Starting
15:07:10 TestInitSystemSystemdRoFull Building
15:21:17 TestInitSystemSystemdRoFull Building done
15:21:46 TestInitSystemSystemdRoFull Cleaning up
.
----------------------------------------------------------------------
Ran 6 tests in 3806.472s
OK
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Baruch Siach [Sat, 9 Mar 2019 18:28:14 +0000 (20:28 +0200)]
package/libpcap: disable dbus to break circular dependency
The optional dbus dependency of libpcap creates a circular dependency
chain:
$ make libpcap-show-recursive-depends
Recursion detected for : systemd
which is a dependency of: dbus
which is a dependency of: libpcap
which is a dependency of: iptables
which is a dependency of: systemd
make: *** [package/libpcap/libpcap.mk:55: libpcap-show-recursive-depends] Error 1
Of all these dependencies the one of libpcap on dbus seems to be less
useful. Drop it.
Fixes:
http://autobuild.buildroot.net/results/
0b5d18bff816cbcee11e8645449701722d956de5/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Thu, 14 Mar 2019 20:26:15 +0000 (21:26 +0100)]
package/x11r7/xapp_xdm: security bump to version 1.1.12
Fixes CVE-2013-2179.
Release notes:
https://lists.x.org/archives/xorg-announce/2019-March/002959.html
Added all license hashes provided by upstream and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Artem Panfilov [Tue, 12 Mar 2019 23:46:51 +0000 (02:46 +0300)]
package/avahi: add upstream security fix
Fixes CVE-2017-6519: avahi-daemon in Avahi through 0.6.32 and 0.7
inadvertently responds to IPv6 unicast queries with source addresses
that are not on-link, which allows remote attackers to cause a denial
of service (traffic amplification) and may cause information leakage
by obtaining potentially sensitive information from the responding
device via port-5353 UDP packets.
Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Grzegorz Blach [Wed, 13 Mar 2019 22:02:52 +0000 (23:02 +0100)]
package/python-aioblescan: new package
Python library to scan and decode advertised BLE info.
Uses asyncio.
https://github.com/frawau/aioblescan
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Wed, 13 Mar 2019 18:23:43 +0000 (19:23 +0100)]
package/liblo: bump to version 0.30
- Remove both patches (already in version)
- Add sha256 hash
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Wed, 13 Mar 2019 18:11:34 +0000 (19:11 +0100)]
package/ngircd: bump to version 25
- Remove patch (already in version)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Wed, 13 Mar 2019 09:39:55 +0000 (10:39 +0100)]
package/bash: add upstream patches up to patch level 23
We unfortunately cannot easily download these because of the file names (not
ending in patch) and patch format (p0), so convert to p1 format and include
in package/bash with the following script:
j=1; for i in 19 20 21 22 23; do
file=$(printf '%04d-patch44-0%d.patch' $j $i)
cat > $file << EOF
>From https://ftp.gnu.org/gnu/bash/bash-4.4-patches/bash44-0$i
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
EOF
curl https://ftp.gnu.org/gnu/bash/bash-4.4-patches/bash44-0$i | \
sed -e 's|^\*\*\* \.\./|*** |' -e 's|^--- |--- b/|' >> $file
j=$(( j + 1 ))
done
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adrien Gallouët [Wed, 13 Mar 2019 08:35:58 +0000 (08:35 +0000)]
package/kexec: update to 2.0.18
This release fixes the following issue with new kernels:
kexec --load bzImage --reuse-cmdline
Unhandled rela relocation: R_X86_64_PLT32
Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Alexandru Ardelean [Wed, 13 Mar 2019 08:29:32 +0000 (10:29 +0200)]
package/libiio: bump to version 0.15
This change bumps libiio, to version 0.15.
This version is currently the most stable version in the series. It
contains several fixes over 0.14.
0.16 & 0.17 have been released but they have some issues with backwards
compatibility, so they are not yet recommended.
Changelog for version 0.15 (over 0.14).
Link:
https://github.com/analogdevicesinc/libiio/releases/tag/v0.15
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Wed, 13 Mar 2019 18:15:12 +0000 (19:15 +0100)]
package/ulogd: bump to version 2.0.7
- Remove three patches (already in version)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Wed, 13 Mar 2019 18:15:11 +0000 (19:15 +0100)]
package/ulogd: add postgresql optional dependency
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Thu, 14 Mar 2019 20:13:11 +0000 (21:13 +0100)]
Revert "package/qt5/qt5webengine: fix comment on GL dependencies"
This reverts commit
6fb4c14ecb1e8f001449830b65ec2a4606b87682. Indeed,
as Peter Seiderer pointed out, the comment is in fact partially
correct: with Qt 5.6, QT5DECLARATIVE_QUICK does require OpenGL
support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Martin Kepplinger [Wed, 13 Mar 2019 08:50:45 +0000 (09:50 +0100)]
package/qt5/qt5webengine: fix comment on GL dependencies
qt5declarative can be built/used without opengl support so fix the
dependency comment in qt5webengine.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Tue, 12 Mar 2019 12:09:33 +0000 (13:09 +0100)]
toolchain: set the ssp gcc option in kconfig
Currently, we repeat all the SSP level selection deep down to the
toolchain wrapper itself, where we eventually translate it to the
actual SSP option to use. This is a bit redundant.
Additionally, we will want to check that the toolchain actually
supports that option (for those toolchain where it was backported).
So, move the translation into kconfig, and add the qstrip'ed value
to the additional flags passed to the wrapper. Add it before
user-supplied opitons, to keep the previous behaviour (and allow
anyone crazy-enough to override it with BR2_TARGET_OPTIMIZATION).
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Yann E. MORIN [Tue, 12 Mar 2019 12:09:32 +0000 (13:09 +0100)]
toolchain: prepare to pass more additional CFLAGS via the wrapper
Currently, we pass the user-supplied so-called target optimisation flags
to the wrapper.
We're going to have additional such CFLAGS to pass, so push-back the
formatting loop to quote the options at the last moment.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Seiderer [Sat, 9 Mar 2019 21:50:36 +0000 (22:50 +0100)]
package/gst1-plugins-bad: add zbar plugin option
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Sat, 9 Mar 2019 21:32:35 +0000 (22:32 +0100)]
package/zbar: bump version to 0.22
- change from git download to official release and
download site (drop need for autoreconf)
- drop dependency on kernel headers >= 3.17 (should be fixed with
commit 'v4l2: make ZBar build and run on Kernels < 3.16' (see [1]),
fall back to original kernel headers >= 3.0 dependency propagated
from libv4l
[1] https://git.linuxtv.org/zbar.git/commit/?id=
fa5c48127ec1e3670e28540c2e6a03431ebac5b8
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sat, 9 Mar 2019 20:24:32 +0000 (21:24 +0100)]
package/stress-ng: bump to version 0.09.55
Drop three patches (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Sun, 10 Mar 2019 10:44:28 +0000 (11:44 +0100)]
package/binutils: add support for binutils 2.32
Remove upstream ARC and Xtensa patches.
Keep all other patches from binutils 2.31.1.
See the release note:
https://sourceware.org/ml/binutils/2019-02/msg00010.html
While testing the Binutils 2.32 version bump, the Qemu xtensa
defconfig (that was using a kernel 4.16) needed to be updated with a
patch [1] from kernel 4.19 otherwise the kernel doesn't boot with
binutils 2.32 [2].
Since then, all Qemu defconfig has been updated by commit [3] to use a
4.19 kernel, so the issue no longer exists.
All other architectures has been tested using toolchain-builder [4].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=
4119ba211bc4f1bf638f41e50b7a0f329f58aa16
[2] https://www.sourceware.org/ml/binutils/2019-02/msg00015.html
[3]
fd8a02fd75d652b85f64c1cd7e9adf1ee2329261
[4] https://gitlab.com/kubu93/toolchains-builder/pipelines/
45896638
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Sun, 10 Mar 2019 10:44:27 +0000 (11:44 +0100)]
package/elf2flt: bump version to fix build with binutils >= 2.32
Binutils added bfd_stdint.h to bfd.h [1], so elf2flt must create a
symlink for this header. This issue has been fixed upstream in commit
[2].
We keep our local patch
0001-ld-elf2flt-behave-properly-when-called-with-a-name-d.patch as it
still hasn't been merged upstream [3].
Fixes (with binutils 2.23):
[armv7m-uclibc] https://gitlab.com/kubu93/toolchains-builder/-/jobs/
148356410
[m68k-coldfire-uclibc] https://gitlab.com/kubu93/toolchains-builder/-/jobs/
148356412
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=
2d5d5a8f0a8b5a03454bf168b7fa7024bb1ebbd8
[2] https://github.com/uclinux-dev/elf2flt/commit/
429521f695c6f4212d809a141bfa4417b733f395
[3] https://github.com/uclinux-dev/elf2flt/pull/8
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sat, 9 Mar 2019 22:38:33 +0000 (23:38 +0100)]
package/jpeg-turbo: bump to version 2.0.2
- Remove two patches (already in version)
- Update hash of LICENSE.md, clarifications on BSD and zlib were added:
https://github.com/libjpeg-turbo/libjpeg-turbo/commit/
90e2d7f3fdbfbc00afc2d21c4a5b61eebcd3c849
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sat, 9 Mar 2019 23:03:18 +0000 (00:03 +0100)]
package/libcdio-paranoia: bump to version 10.2+2.0.0
Add LIBCDIO_PARANOIA_SOURCE to download a tar.bz2 (tar.gz is not
available for this version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
James Hilliard [Sun, 10 Mar 2019 03:14:07 +0000 (11:14 +0800)]
package/wpewebkit: fix host gcc >= 4.8 check
We need host gcc >= 4.8 not host gcc < 4.8.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: James Hilliard <<a href="mailto:james.hilliard1@gmail.com" target="_blank">james.hilliard1@gmail.com</a>><br></blockquote><div><br></div><div><span class="gmail-m_4107183884095209747gmail-il"><span class="gmail-il">Acked</span></span>-by: Francois Perrad <<a href="mailto:francois.perrad@gadz.org" target="_blank">francois.perrad@gadz.org</a>></div><div> <br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 11 Mar 2019 22:26:30 +0000 (23:26 +0100)]
package/libdrm: amdgpu needs MMU
amdgpu test uses fork() so disable amdgpu without MMU
Fixes:
- http://autobuild.buildroot.org/results/
8d6194982c1080e173fcef8212fb06e6dc275d58
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adrien Gallouët [Tue, 12 Mar 2019 11:00:44 +0000 (11:00 +0000)]
package/bird: bump to version 2.0.4
Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Christian Stewart [Tue, 12 Mar 2019 05:41:14 +0000 (22:41 -0700)]
package/go: set GOCACHE to a host path
Set the GOCACHE environment variable properly.
It was previously unset, and defaults to $HOME/.cache/go-build.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
projects / buildroot.git / log