gdbadmin [Fri, 26 Apr 2013 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Tom Tromey [Thu, 25 Apr 2013 16:25:37 +0000 (16:25 +0000)]
PR corefiles/14983:
* dwarf2read.c (process_full_comp_unit): Always create a static
block.
gdb/testsuite
* gdb.dwarf2/nostaticblock.exp: New file.
Alan Modra [Thu, 25 Apr 2013 13:22:52 +0000 (13:22 +0000)]
bfd/
* config.bfd: Add powerpc64le-linux.
gas/
* configure.in: Allow little-endian linux.
* configure: Regenerate.
gold/
* configure.tgt: Add powerpcle and powerpc64le.
ld/
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32lppclinux.c.
(eelf32lppclinux.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt: Merge powerpc-linux and other powerpc-elf targets
with corresponding little-endian targets.
* emulparams/elf32lppc.sh: Update comment.
* emulparams/elf32lppclinux.sh: New.
Hui Zhu [Thu, 25 Apr 2013 08:03:31 +0000 (08:03 +0000)]
Fix format error of ChangeLog.
Hui Zhu [Thu, 25 Apr 2013 02:58:05 +0000 (02:58 +0000)]
2013-04-25 Hui Zhu <hui@codesourcery.com>
PR gdb/15186
* ax.c (ax_printf): Add fflush.
gdbadmin [Thu, 25 Apr 2013 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 25 Apr 2013 00:00:04 +0000 (00:00 +0000)]
daily update
Hui Zhu [Wed, 24 Apr 2013 23:09:31 +0000 (23:09 +0000)]
2013-04-25 Hui Zhu <hui@codesourcery.com>
* breakpoint.c (build_target_command_list): Change loc->cond_bytecode
to loc->cmd_bytecode.
Sandra Loosemore [Wed, 24 Apr 2013 20:51:58 +0000 (20:51 +0000)]
2013-04-24 Sandra Loosemore <sandra@codesourcery.com>
gas/
* config/tc-nios2.c (nios2_control_register_arg_p): Rename
"fstatus" control register to "eccinj".
opcodes/
* nios2-opc.c (nios2_builtin_reg): Rename "fstatus" control register
to "eccinj".
Doug Evans [Wed, 24 Apr 2013 19:12:26 +0000 (19:12 +0000)]
* dwarf2read.c (setup_type_unit_groups): Fix comment.
H.J. Lu [Wed, 24 Apr 2013 18:58:14 +0000 (18:58 +0000)]
Enable x32 for x86_64-*-elf*
This patch enables x32 for x86_64-*-elf* for embedded target and disables
rex tests since it uses '/' as prefix separator which is `\' for
x86_64-*-elf*.
bfd/
* config.bfd (targ_selvecs): Add bfd_elf32_x86_64_vec for
x86_64-*-elf*.
gas/testsuite/
* gas/i386/rex.d: Skip x86_64-*-elf*.
* gas/i386/ilp32/rex.d: Likewise.
ld/
* configure.tgt (targ_extra_emuls): Adds elf32_x86_64 for
x86_64-*-elf*.
(targ_extra_libpath): Likewise.
(tdir_elf_i386): Replace x86_64 with i386 for x86_64-*-elf*.
Keith Seitz [Wed, 24 Apr 2013 18:22:31 +0000 (18:22 +0000)]
* tracepoint.c (trace_save): Call the writer's start method.
Yufeng Zhang [Wed, 24 Apr 2013 17:22:31 +0000 (17:22 +0000)]
ld/
* emulparams/aarch64elf.sh: Define ELFSIZE=64.
* emulparams/aarch64linux.sh: Ditto.
* emultempl/aarch64elf.em (aarch64_elf_before_allocation):
Replace elf64 with elf${ELFSIZE}.
(elf64_aarch64_add_stub_section): Likewise.
(build_section_lists): Likewise.
(gld${EMULATION_NAME}_after_allocation): Likewise.
(gld${EMULATION_NAME}_finish): Likewise.
(aarch64_elf_create_output_section_statements): Likewise.
Roland McGrath [Wed, 24 Apr 2013 16:29:55 +0000 (16:29 +0000)]
bfd/
* elf32-arm.c (elf32_arm_allocate_plt_entry): If HTAB->nacl_p,
allocate space for PLT header even if IS_IPLT_ENTRY.
(arm_nacl_put_plt0): New function, broken out of ...
(elf32_arm_finish_dynamic_sections): ... here. Call it.
If HTAB->nacl_p, set up the PLT header in .iplt too.
(elf32_arm_output_arch_local_syms): If HTAB->nacl_p, write
a mapping symbol for the start of .iplt too.
Nick Clifton [Wed, 24 Apr 2013 15:28:12 +0000 (15:28 +0000)]
PR ld/15389
* scripttempl/avr.sc: Add .note.gnu.build-id section.
Muhammad Bilal [Wed, 24 Apr 2013 14:29:17 +0000 (14:29 +0000)]
2013-04-24 Muhammad Bilal <mbilal@codesourcery.com>
PR gdb/10462
* cli/cli-decode.c (lookup_command): Show an error if there is no space
before argument.
2013-04-24 Muhammad Bilal <mbilal@codesourcery.com>
PR gdb/10462
* gdb.base/setshow.exp: Add test case.
Nick Clifton [Wed, 24 Apr 2013 13:24:30 +0000 (13:24 +0000)]
oops - revert accidental commit
Nick Clifton [Wed, 24 Apr 2013 13:22:43 +0000 (13:22 +0000)]
*** empty log message ***
Nick Clifton [Wed, 24 Apr 2013 13:19:27 +0000 (13:19 +0000)]
* ecoff.c: casting the return value of BFD_ALIGN to int
* elf32-tic6x.c: removing unused variables
* elf32-v850.c: redefine the type of a variable (int -> bfd_vma)
* vms-alpha.c: initialize a variable
gdbadmin [Wed, 24 Apr 2013 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 24 Apr 2013 00:00:04 +0000 (00:00 +0000)]
daily update
Tom Tromey [Tue, 23 Apr 2013 15:49:25 +0000 (15:49 +0000)]
* common/filestuff.c: Check USE_WIN32API before including
sys/socket.h.
(HAVE_F_GETFD): New define.
(mark_cloexec): Check HAVE_F_GETFD.
(gdb_open_cloexec): Change 'mode' to unsigned long.
(gdb_socketpair_cloexec): Check HAVE_SOCKETPAIR.
(gdb_pipe_cloexec): Check HAVE_PIPE.
* common/filestuff.h (gdb_open_cloexec): Change 'mode' to unsigned
long.
DJ Delorie [Tue, 23 Apr 2013 04:05:04 +0000 (04:05 +0000)]
merge from gcc
Hui Zhu [Tue, 23 Apr 2013 03:20:21 +0000 (03:20 +0000)]
2013-04-23 Hui Zhu <hui@codesourcery.com>
PR gdb/15293
* breakpoint.c (bpstat_what): Add BPSTAT_WHAT_SINGLE to bp_dprintf.
2013-04-23 Hui Zhu <hui@codesourcery.com>
PR gdb/15293
* gdb.base/dprintf.exp: Add ignore command.
Hui Zhu [Tue, 23 Apr 2013 02:42:44 +0000 (02:42 +0000)]
2013-04-23 Hui Zhu <hui@codesourcery.com>
PR gdb/15165
* breakpoint.c (dprintf_print_recreate): New.
(save_breakpoints): Let it not save dprintf commands.
(initialize_breakpoint_ops): Set dprintf_print_recreate.
2013-04-23 Hui Zhu <hui@codesourcery.com>
PR gdb/15165
* gdb.base/save-bp.exp: Add test for dprintf.
Alan Modra [Tue, 23 Apr 2013 00:00:04 +0000 (00:00 +0000)]
daily update
gdbadmin [Tue, 23 Apr 2013 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Tom Tromey [Mon, 22 Apr 2013 20:18:23 +0000 (20:18 +0000)]
* gdb.gdb/selftest.exp (do_steps_and_nexts): Check for
notice_open_fds.
Jan-Benedict Glaw [Mon, 22 Apr 2013 17:11:22 +0000 (17:11 +0000)]
2013-04-22 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* Makefile.def: Sync with GCC.
* Makefile.in: Regenerate.
Tom Tromey [Mon, 22 Apr 2013 16:46:15 +0000 (16:46 +0000)]
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
Edjunior Barbosa Machado [Mon, 22 Apr 2013 15:50:57 +0000 (15:50 +0000)]
2013-04-22 Edjunior Machado <emachado@linux.vnet.ibm.com>
* remote-sim.c (dump_mem): Change the type of 'buf' parameter from
'char *' to 'gdb_byte *'.
(gdbsim_store_register): Change the type of 'tmp' from 'char' to
'gdb_byte'.
Jan-Benedict Glaw [Mon, 22 Apr 2013 15:25:09 +0000 (15:25 +0000)]
2013-04-22 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* configure.ac: Sync with GCC.
* configure: Regenerated.
Alan Modra [Mon, 22 Apr 2013 15:03:01 +0000 (15:03 +0000)]
PR ld/15382
* elf-bfd.h (RELOC_AGAINST_DISCARDED_SECTION): Don't multiply
sh_size or reloc_count adjustment by count.
Yao Qi [Mon, 22 Apr 2013 09:34:27 +0000 (09:34 +0000)]
gdb/
* infrun.c: Fix typo in comment.
Sergio Durigan Junior [Mon, 22 Apr 2013 09:32:21 +0000 (09:32 +0000)]
2013-04-22 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/arm-bl-branch-dest.exp: Replace additional_flags by
ldflags.
Sergio Durigan Junior [Mon, 22 Apr 2013 09:20:33 +0000 (09:20 +0000)]
Andrew Haley found a bug on GDB running on ARM when using
--enable-64-bit-bfd. Basically the issue happens when dealing with "bl"
instructions: GDB does branch destination calculation and (wrongly)
sign-extends the PC. Here is a piece of his original message explaining
the problem:
> next_pc = arm_get_next_pc (frame, get_frame_pc (frame));
>
> /* The Linux kernel offers some user-mode helpers in a high page. We can
> not read this page (as of 2.6.23), and even if we could then we couldn't
> set breakpoints in it, and even if we could then the atomic operations
> would fail when interrupted. They are all called as functions and return
> to the address in LR, so step to there instead. */
> if (next_pc > 0xffff0000)
> next_pc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
>
> arm_insert_single_step_breakpoint (gdbarch, aspace, next_pc);
>
> Unfortunately, branch destination addresses are SIGN EXTENDED to 64
> bits. So,
>
> (top-gdb) p/x next_pc
> $14 = 0xffffffffb6df2864
>
> Which triggers the next_pc = get_frame_register_unsigned(), and we
> cannot step into any branches because the destination PC is wrong.
Anyway, the fix is simple and Andrew himself provided it for us. It
took a while for me to figure out how to trigger the bug (in order to
write a testcase for it), but I finally made it.
The attached patch fixes the problem (by casting to `unsigned long'
instead of just `long'), and also includes a testcase to reproduce the
issue.
gdb/ChangeLog:
2013-04-22 Andrew Haley <aph@redhat.com>
* arm-tdep.c (BranchDest): Cast result as "unsigned long",
instead of "long".
gdb/testsuite/ChangeLog:
2013-04-22 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/arm-bl-branch-dest.c: New file.
* gdb.arch/arm-bl-branch-dest.exp: Likewise.
Alan Modra [Mon, 22 Apr 2013 03:11:40 +0000 (03:11 +0000)]
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Don't call
create_linkage_sections here..
(ppc64_elf_init_stub_bfd): ..do so here. Return status.
(create_linkage_sections): Move earlier in file.
(ppc64_elf_setup_section_lists): Remove now useless htab->brlt test.
* elf64-ppc.h (ppc64_elf_init_stub_bfd): Update proto.
ld/
* emultempl/ppc64elf.em (ppc_create_output_section_statements):
Check return from ppc64_elf_init_stub_bfd.
ld/testsuite/
* ld-powerpc/tlsexe.d: Adjust.
* ld-powerpc/tlsexe.r: Adjust.
* ld-powerpc/tlsexetoc.d: Adjust.
* ld-powerpc/tlsexetoc.r: Adjust.
* ld-powerpc/tlsso.d: Adjust.
* ld-powerpc/tlsso.r: Adjust.
* ld-powerpc/tlstocso.d: Adjust.
* ld-powerpc/tlstocso.r: Adjust.
gdbadmin [Mon, 22 Apr 2013 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 22 Apr 2013 00:00:04 +0000 (00:00 +0000)]
daily update
Alan Modra [Sun, 21 Apr 2013 23:21:56 +0000 (23:21 +0000)]
PR gold/15355
* layout.cc (Layout::segment_precedes): Allow more than one
segment with the same type and flags.
gdbadmin [Sun, 21 Apr 2013 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 21 Apr 2013 00:00:05 +0000 (00:00 +0000)]
daily update
Yao Qi [Sat, 20 Apr 2013 07:38:39 +0000 (07:38 +0000)]
gdb/
* ctf.c (ctf_fetch_registers): Change the type of 'regs' from
'char *' to 'gdb_byte *'. Cast the return value of
'bt_ctf_get_char_array' to 'gdb_byte *'.
gdbadmin [Sat, 20 Apr 2013 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 20 Apr 2013 00:00:04 +0000 (00:00 +0000)]
daily update
Pedro Alves [Fri, 19 Apr 2013 18:41:32 +0000 (18:41 +0000)]
s/signness/signedness in gdbint.texinfo.
"signedness" is more typical.
gdb/doc/
2013-04-19 Pedro Alves <palves@redhat.com>
* gdbint.texinfo (Misc Guidelines) <Compiler Warnings>: Write
"signedness" instead of "signness".
Pedro Alves [Fri, 19 Apr 2013 18:32:54 +0000 (18:32 +0000)]
Enable -Wpointer-sign by default.
This enables -Wpointer-sign by default.
I've checked that --enable-targets=all builds fine with the following
as --host, on x86_64 Fedora 17 --build:
x86_64 GNU/Linux
i386 GNU/Linux
i386 MinGW-w64
i386 msdos/djgpp
OK?
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* configure.ac (build_warnings): Replace -Wno-pointer-sign with
-Wpointer-sign.
* configure: Regenerate.
gdb/doc
2013-04-19 Pedro Alves <palves@redhat.com>
* gdbint.texinfo (Misc Guidelines) <Compiler Warnings>: Replace
-Wno-pointer-sign text with text on -Wpointer-sign.
Hafiz Abid Qadeer [Fri, 19 Apr 2013 18:17:32 +0000 (18:17 +0000)]
2013-04-19 Nathan Froyd <froydnj@codesourcery.com>
* ppc-instructions (isel): New instruction.
Pedro Alves [Fri, 19 Apr 2013 17:48:10 +0000 (17:48 +0000)]
Make GDB -Wpointer-sign clean on MinGW too.
This is the remaining issue impeding GDB to build with "-Wpointer-sign
-Werror" with Fedora 17's i686-w64-mingw32 cross toolchain.
../../src/gdb/ser-tcp.c: In function 'net_read_prim':
../../src/gdb/ser-tcp.c:341:3: error: pointer targets in passing argument 2 of 'recv' differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/serial.h:23:0,
from ../../src/gdb/ser-tcp.c:21:
/usr/i686-w64-mingw32/sys-root/mingw/include/winsock2.h:983:34: note: expected 'char *' but argument is of type 'unsigned char *'
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* ser-tcp.c (net_read_prim): Cast second argument to recv to
'void *'.
Pedro Alves [Fri, 19 Apr 2013 17:44:18 +0000 (17:44 +0000)]
-Wpointer-sign: monitor.c.
This fixes -Wpointer-sign issues in monitor.c.
Tested by building on x86_64 Fedora 17 w/ --enable-targets=all.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* monitor.c (monitor_write_memory, monitor_write_memory_bytes):
Change type of 'myaddr' parameter to gdb_byte pointer.
(monitor_write_memory_longlongs): Likewise. Cast 'myaddr' pointer
to 'long long' pointer instead of to 'unsigned long long'.
(monitor_write_memory_block, monitor_read_memory_single)
(monitor_read_memory): Change type of 'myaddr' parameter to
gdb_byte pointer.
Pedro Alves [Fri, 19 Apr 2013 15:37:31 +0000 (15:37 +0000)]
-Wpointer-sign: record.c.
../../src/gdb/record.c: In function ‘set_record_insn_history_size’:
../../src/gdb/record.c:670:5: error: pointer targets in passing argument 2 of ‘validate_history_size’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/record.c:646:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/record.c: In function ‘set_record_call_history_size’:
../../src/gdb/record.c:682:5: error: pointer targets in passing argument 2 of ‘validate_history_size’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/record.c:646:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
This fixes it in the obvious way.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* record.c (validate_history_size): Make parameter 'setting'
unsigned.
Pedro Alves [Fri, 19 Apr 2013 15:36:52 +0000 (15:36 +0000)]
-Wpointer-sign: ctf.c.
ctf_save_write's second parameter is gdb_byte *, and all these
arguments are 'char *'. Since this function is ultimately just
writing host bytes to a local file with fwrite, an alternative would
be to change ctf_save_write to take a 'void *' instead of 'gdb_byte
*', thus removing the need for any cast (we have more calls with casts
than without).
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* ctf.c (ctf_write_uploaded_tsv, ctf_write_uploaded_tp): Add casts
to 'gdb_byte *'.
Pedro Alves [Fri, 19 Apr 2013 15:36:24 +0000 (15:36 +0000)]
-Wpointer-sign: cp-valprint.c.
Fix:
../../src/gdb/cp-valprint.c: In function ‘cp_print_class_member’:
../../src/gdb/cp-valprint.c:793:3: error: pointer targets in passing argument 2 of ‘cp_find_class_member’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/cp-valprint.c:721:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
'fieldno' is used throughout as 'int', so just follow the trend.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_class_member): Change type of 'fieldno'
local to int.
Pedro Alves [Fri, 19 Apr 2013 15:35:58 +0000 (15:35 +0000)]
-Wpointer-sign: ada-lang.c, ada-tasks.c.
We're reading strings using the target memory access routines, which
work with raw bytes, so we need a couple casts.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* ada-lang.c (print_it_exception): Add cast to gdb_byte *.
* ada-tasks.c (read_fat_string_value): Likewise.
Pedro Alves [Fri, 19 Apr 2013 15:35:21 +0000 (15:35 +0000)]
-Wpointer-sign: dwarf2-frame.c: Pass unsigned variable to safe_read_uleb128.
The 'bytes_read' change should be obvious. As for the other hunk,
we're passing the address of the signed 'offset' to safe_read_uleb128,
which expects unsigned. Fix it by passing the address of the unsigned
'utmp' instead, like already done on other spots in the file.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* dwarf2-frame.c (execute_cfa_program): Make 'bytes_read' local
unsigned. Pass 'tmp' to safe_read_uleb128 instead of the signed
'offset', and adjust.
Pedro Alves [Fri, 19 Apr 2013 15:34:46 +0000 (15:34 +0000)]
-Wpointer-sign: dwarf2read.c.
This fixes the remaining issues necessary to make the DWARF reader
-Wpointer-sign clean. The 'filename' bit should be obvious.
'constant_pool' holds the contents of an obstack, which are 'char *'.
gdb_byte would work too, but it'd need more casts elsewhere, so I just
chose the minimal approach. Any way would be fine with me.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* dwarf2read.c (dwarf2_get_dwz_file): Add cast to const char *.
(read_index_from_section): Add cast to 'char *'.
Pedro Alves [Fri, 19 Apr 2013 15:33:58 +0000 (15:33 +0000)]
-Wpointer-sign: xcoffread.c.
../../src/gdb/xcoffread.c: In function ‘xcoff_initial_scan’:
../../src/gdb/xcoffread.c:2982:17: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
'debugsec' is a 'bfd_byte *', holding the result of a
bfd_get_full_section_contents. 'info->debugsec' holds the same
contents throughout the whole xcoff read, and everywhere it's used to
read symbol names. Simply adding a cast feels appropriate.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* xcoffread.c (xcoff_initial_scan): Add cast to 'char *'.
Pedro Alves [Fri, 19 Apr 2013 15:33:29 +0000 (15:33 +0000)]
-Wpointer-sign: coff-pe-read.c: treat strings in PE/COFF data as char *.
A couple places take a pointer to the middle of some raw section
buffer and treat them as strings. Add casts to char * as appropriate,
fixing -Wpointer-sign warnings.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* coff-pe-read.c (read_pe_exported_syms): Handle strings as char.
Pedro Alves [Fri, 19 Apr 2013 15:32:56 +0000 (15:32 +0000)]
-Wpointer-sign: bookmarks.
Bookmarks are opaque to the core code -- by design, the target is free
to use any sort of blob as bookmark identifier.
The record target chooses to use strings for bookmarks. This adds
casts following that direction, fixing -Wpointer-sign warnings.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* record-full.c (record_full_get_bookmark): Change local 'ret'
type to char * and add cast to gdb_byte *.
(record_full_goto_bookmark): Handle 'bookmark' argument as a
string.
* reverse.c (goto_bookmark_command): Add casts to gdb_byte *.
Pedro Alves [Fri, 19 Apr 2013 15:29:09 +0000 (15:29 +0000)]
-Wpointer-sign: python/.
This fixes -Wpointer-sign warnings in the python/ code in the manner
that seems most appropriate to me.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* python/py-inferior.c (infpy_write_memory): Add cast to gdb_byte
* python/py-prettyprint.c (print_string_repr): Change type of
'output' local to char *. Add cast to gdb_byte * in
LA_PRINT_STRING call.
(print_children): Change type of 'output' local to char *.
* python/py-value.c (valpy_string): Add cast to const char * in
PyUnicode_Decode call.
Pedro Alves [Fri, 19 Apr 2013 15:28:42 +0000 (15:28 +0000)]
-Wpointer-sign: remote-mips.c.
remote-mips.c has a bunch of -Wpointer-sign warnings:
../../src/gdb/remote-mips.c: In function ‘mips_receive_packet’:
../../src/gdb/remote-mips.c:1128:7: error: pointer targets in passing argument 2 of ‘mips_cksum’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:830:1: note: expected ‘const unsigned char *’ but argument is of type ‘char *’
../../src/gdb/remote-mips.c:1135:7: error: pointer targets in passing argument 2 of ‘mips_cksum’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:830:1: note: expected ‘const unsigned char *’ but argument is of type ‘char *’
../../src/gdb/remote-mips.c: In function ‘mips_load_srec’:
../../src/gdb/remote-mips.c:2830:12: error: pointer targets in passing argument 4 of ‘mips_make_srec’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:134:12: note: expected ‘unsigned char *’ but argument is of type ‘char *’
../../src/gdb/remote-mips.c: In function ‘pmon_zeroset’:
../../src/gdb/remote-mips.c:3030:3: error: pointer targets in passing argument 4 of ‘pmon_makeb64’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:2977:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c: In function ‘pmon_make_fastrec’:
../../src/gdb/remote-mips.c:3124:6: error: pointer targets in passing argument 3 of ‘pmon_zeroset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3025:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3126:4: error: pointer targets in passing argument 4 of ‘pmon_makeb64’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:2977:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3148:3: error: pointer targets in passing argument 3 of ‘pmon_zeroset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3025:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3153:3: error: pointer targets in passing argument 3 of ‘pmon_zeroset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3025:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3154:8: error: pointer targets in passing argument 4 of ‘pmon_makeb64’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:2977:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c: In function ‘pmon_load_fast’:
../../src/gdb/remote-mips.c:3423:2: error: pointer targets in passing argument 4 of ‘pmon_makeb64’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:2977:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3457:4: error: pointer targets in passing argument 3 of ‘pmon_checkset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3051:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3484:8: error: pointer targets in passing argument 3 of ‘pmon_zeroset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3025:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/remote-mips.c:3489:3: error: pointer targets in passing argument 3 of ‘pmon_checkset’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/remote-mips.c:3051:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
The mips packet payload is ASCII, so it makes sense for
mips_send_packet and mips_receive_packet to expose 'char *'-based
interfaces, as currently they do. But, mips packets have a binary
header, so if you look at e.g., mips_receive_packet's implementation,
you'll see "unsigned char" buffers in use. I find it the most natural
to make the payload pointer passed to mips_cksum 'char *' too.
The other changes are straightforward adjustments -- a checksum is
naturally unsigned, and there's one point where we're reading a bfd section.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* remote-mips.c (mips_cksum): Rename 'data' parameter to 'datastr'
and change its type to 'const char *'. Adjust.
(mips_send_packet): Add cast to 'char *', and remove cast to
'unsigned char *'.
(mips_receive_packet): Remove cast to 'unsigned char *'.
(mips_load_srec): Use bfd_byte.
(pmon_makeb64, pmon_zeroset): Make 'chksum' parameter unsigned.
(pmon_checkset): Make 'value' parameter unsigned.
Pedro Alves [Fri, 19 Apr 2013 15:27:54 +0000 (15:27 +0000)]
gdb_byte for binary buffer, char for string: common/agent.c.
Similarly to the remote code, agent commands are mostly ascii. Cast to
gdb_byte when treating the command buffer as raw memory bytes.
2013-04-19 Pedro Alves <palves@redhat.com>
* common/agent.c (agent_run_command): Add cast to gdb_byte *.
Pedro Alves [Fri, 19 Apr 2013 15:27:06 +0000 (15:27 +0000)]
gdb_byte for binary buffer, char for string: remote.c, tracepoint.c.
While the RSP is largely ASCII based (hence the packet buffer type is
char *), at places we pass around 8-bit binary packets in that buffer.
Functions like hex2bin or remote_escape_output conceptually are
handling binary buffers, so I left them as working with gdb_byte, and
added casts where necessary. Whether these are host bytes or target
bytes is blurry at present, so this is largely a matter of taste.
Switching some of these functions to take "char *" or "void *" would
be equally good.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* remote.c (remote_write_bytes_aux, compare_sections_command)
(remote_read_qxfer)
(remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
(remote_hostio_readlink, remote_bfd_iovec_pread)
(remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
binary buffer, and char when buffer is used as string.
* tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
(trace_save, tfile_open, traceframe_walk_blocks)
(tfile_fetch_registers): Likewise.
Pedro Alves [Fri, 19 Apr 2013 15:26:17 +0000 (15:26 +0000)]
serial_write: change prototype to take a void-pointer buffer.
While remote.c works with "char *" buffers most of the time, other
remote targets have binary-ish-er protocols, and choose to use
"unsigned char" throughout, like e.g., remote-mips.c or
remote-m32r-sdi.c. That results in -Wpointer-sign warnings in those
targets, unless we add casts in calls to serial_write. Since
serial_write is only concerned about sending raw host bytes out, and
serial_ops->write_prim already works with "void *"/"size_t", a similar
interface to the "write" or "send" system calls, I find it natural to
change serial_write's prototype accordingly, avoiding the need for
casts.
Tested on x86_64 Fedora 17, and also by building x86_64-mingw32
and DJGPP/go32 -hosted gdbs.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* ser-base.c (ser_base_write): Change prototype -- take 'void *'
buffer and size_t size. Adjust.
* ser-base.h (ser_base_write): Adjust.
* ser-go32.c (cnts): Change type to size_t.
(dos_write): Change prototype -- take 'void *'
buffer and size_t size. Adjust.
(dos_info): Print elements of 'cnts' as unsigned long.
* serial.c (serial_write): Likewise.
* serial.h (serial_write): Adjust.
(struct serial_ops) <write>: Change prototype -- take 'void *'
buffer and size_t size. Adjust.
Pedro Alves [Fri, 19 Apr 2013 15:24:55 +0000 (15:24 +0000)]
Cast result of obstack_base to gdb_byte * in a couple spots.
obstack_base returns char *. Need to cast to gdb_byte * in a couple spots.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* c-lang.c (evaluate_subexp_c): Cast result of obstack_base to
gdb_byte *.
* linux-tdep.c (linux_make_mappings_corefile_notes): Likewise.
Pedro Alves [Fri, 19 Apr 2013 15:24:25 +0000 (15:24 +0000)]
-Wpointer-sign: alpha-tdep.c.
../../src/gdb/alpha-tdep.c: In function ‘alpha_extract_return_value’:
../../src/gdb/alpha-tdep.c:520:4: error: pointer targets in passing argument 3 of ‘regcache_cooked_read_signed’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/alpha-tdep.c:36:0:
We use regcache_cooked_read_unsigned everywhere else too.
2013-04-19 Pedro Alves <palves@redhat.com>
* alpha-tdep.c (alpha_extract_return_value): Use
regcache_cooked_read_unsigned to read 'v0'.
Pedro Alves [Fri, 19 Apr 2013 15:23:52 +0000 (15:23 +0000)]
-Wpointer-sign: xtensa-tdep.c.
../../src/gdb/xtensa-tdep.c:2914:4: error: pointer targets in passing argument 7 of ‘xtensa_operand_get_field’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/xtensa-tdep.c:53:0:
../../src/gdb/../include/xtensa-isa.h:487:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
../../src/gdb/xtensa-tdep.c:2916:4: error: pointer targets in passing argument 4 of ‘xtensa_operand_decode’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/xtensa-tdep.c:53:0:
../../src/gdb/../include/xtensa-isa.h:507:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
../../src/gdb/xtensa-tdep.c:2918:4: error: pointer targets in passing argument 7 of ‘xtensa_operand_get_field’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/xtensa-tdep.c:53:0:
../../src/gdb/../include/xtensa-isa.h:487:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
../../src/gdb/xtensa-tdep.c:2920:4: error: pointer targets in passing argument 4 of ‘xtensa_operand_decode’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/xtensa-tdep.c:53:0:
../../src/gdb/../include/xtensa-isa.h:507:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
../../src/gdb/xtensa-tdep.c:2922:4: error: pointer targets in passing argument 7 of ‘xtensa_operand_get_field’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/xtensa-tdep.c:53:0:
../../src/gdb/../include/xtensa-isa.h:487:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
../../src/gdb/xtensa-tdep.c:2924:4: error: pointer targets in passing argument 4 of ‘xtensa_operand_decode’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/xtensa-tdep.c:53:0:
../../src/gdb/../include/xtensa-isa.h:507:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
Those bfd functions that decode instructions output uint32_t values.
Hence this fix:
2013-04-19 Pedro Alves <palves@redhat.com>
* xtensa-tdep.c (execute_l32e, execute_s32e): Change type of
parameters 'at', 'as' and 'offset' to uint32_t.
Pedro Alves [Fri, 19 Apr 2013 15:23:18 +0000 (15:23 +0000)]
-Wpointer-sign: aarch64-tdep.c.
../../src/gdb/aarch64-tdep.c: In function ‘aarch64_analyze_prologue’:
../../src/gdb/aarch64-tdep.c:713:7: error: pointer targets in passing argument 3 of ‘decode_cb’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/aarch64-tdep.c:386:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
../../src/gdb/aarch64-tdep.c:747:7: error: pointer targets in passing argument 3 of ‘decode_stur’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/aarch64-tdep.c:597:1: note: expected ‘int *’ but argument is of type ‘unsigned int *’
'is64' is just used as a boolean; signed/unsigned doesn't really matter.
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_analyze_prologue): Change type of local
'is64' to signed 'int'.
Pedro Alves [Fri, 19 Apr 2013 15:22:47 +0000 (15:22 +0000)]
-Wpointer-sign: s390-tdep.c.
-Wpointer-sign reveals a bunch of:
../../src/gdb/s390-tdep.c:1342:7: error: pointer targets in passing argument 4 of ‘is_rx’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/s390-tdep.c:1038:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
../../src/gdb/s390-tdep.c:1343:9: error: pointer targets in passing argument 5 of ‘is_rxy’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/s390-tdep.c:1055:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
../../src/gdb/s390-tdep.c:1344:9: error: pointer targets in passing argument 5 of ‘is_rxy’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/s390-tdep.c:1055:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
...
../../src/gdb/s390-tdep.c:1363:7: error: pointer targets in passing argument 5 of ‘is_rs’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/s390-tdep.c:966:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
../../src/gdb/s390-tdep.c:1364:9: error: pointer targets in passing argument 6 of ‘is_rsy’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/s390-tdep.c:983:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
../../src/gdb/s390-tdep.c:1365:9: error: pointer targets in passing argument 6 of ‘is_rsy’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/s390-tdep.c:983:1: note: expected ‘unsigned int *’ but argument is of type ‘int *’
...
I don't know much about s390, but from reading the code I believe the
right fix is to treat d2 as signed.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* s390-tdep.c (is_rs, is_rsy, is_rx, is_rxy): Change type of 'd2'
parameter to int *.
Pedro Alves [Fri, 19 Apr 2013 15:22:14 +0000 (15:22 +0000)]
ppc-linux-tdep.c: Wrong signness for buffer holding instructions.
There seems to be no reason for this buffer to be signed. We pass it
around to functions expecting it to be unsigned (which triggers
-Wpointer-sign warnings).
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* ppc-linux-tdep.c (ppc_skip_trampoline_code): Change local
'insnbuf' buffer type to unsigned int[].
Pedro Alves [Fri, 19 Apr 2013 15:21:24 +0000 (15:21 +0000)]
mips-tdep.c: Wrong signness for local holding PC register.
Addresses on MIPS are signed, and we're indeed using
regcache_cooked_read_signed to read the PC, but, we're passing it the
address of an unsigned variable, which triggers a -Wpointer-sign
warning. I've chosen to change the variable's type. I believe this
will end up being the same (though I can't test it).
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* mips-tdep.c (mips_read_pc): Change local 'pc' type to LONGEST.
Pedro Alves [Fri, 19 Apr 2013 15:15:55 +0000 (15:15 +0000)]
mep-tdep.c: Wrong signness for instruction buffer.
There seems to be no reason for this to be signed.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* mep-tdep.c (mep_get_insn): Change 'insn' parameter type to
unsigned long *.
Pedro Alves [Fri, 19 Apr 2013 15:15:21 +0000 (15:15 +0000)]
alpha-tdep.c/mips-tdep.c: "set heuristic-fence-post" is signed/zinteger.
These commands are currently var_zinteger, hence their control
variable is signed.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* alpha-tdep.c (heuristic_fence_post): Change type to int.
(alpha_heuristic_proc_start): Adjust to check -1 instead of
UINT_MAX.
* mips-tdep.c (heuristic_fence_post): Change type to int.
(heuristic_proc_start): Adjust to check -1 instead of UINT_MAX.
Pedro Alves [Fri, 19 Apr 2013 15:14:23 +0000 (15:14 +0000)]
cris-tdep.c: Use unsigned variable for unsigned command.
"set cris-version" is an unsigned command:
/* CRIS-specific user-commands. */
add_setshow_uinteger_cmd ("cris-version", class_support,
&usr_cmd_cris_version,
_("Set the current CRIS version."),
_("Show the current CRIS version."),
_("\
Set to 10 for CRISv10 or 32 for CRISv32 if autodetection fails.\n\
Defaults to 10. "),
Tested by building on x86_64 Fedora 17.
2013-04-19 Pedro Alves <palves@redhat.com>
* cris-tdep.c (usr_cmd_cris_version): Make unsigned.
(struct gdbarch_tdep) <cris_version>: Make unsigned.
(cris_spec_reg_applicable, cris_gdbarch_init): Adjust locals.
Pedro Alves [Fri, 19 Apr 2013 15:10:53 +0000 (15:10 +0000)]
-Wpointer-sign: gdb_byte -> char.
This is sort of the opposite of the previous patch. Places that
manipulate strings or interfaces that return strings are changed to
use char* instead of gdb_byte*.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* avr-tdep.c (avr_io_reg_read_command): New local 'bufstr'. Use
it to get a string view of the byte buffer.
* i386-cygwin-tdep.c (core_process_module_section): Change local 'buf'
type to gdb_byte *. Adjust.
* linux-tdep.c (linux_info_proc, linux_find_memory_regions_full):
Change local to char *.
* solib-darwin.c (find_program_interpreter): Change return type to
char *. Adjust.
(darwin_solib_get_all_image_info_addr_at_init): Adjust.
* solib-dsbt.c (enable_break2): Change local 'buf' to char *.
* solib-frv.c (enable_break2): Change local 'buf' to char *.
* solib-spu.c (spu_current_sos): Add gdb_byte * cast.
* solib-svr4.c (find_program_interpreter): Change return type to
char *. Adjust.
(enable_break): Change local 'interp_name' to char *.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_pseudo_register_read_spu): Add cast to 'char *'.
(spu_pseudo_register_write_spu): Use char for string buffer.
Adjust.
(info_spu_event_command, info_spu_signal_command): Add casts to
'char *'.
Pedro Alves [Fri, 19 Apr 2013 15:09:46 +0000 (15:09 +0000)]
-Wpointer-sign: char -> gdb_byte.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
Pedro Alves [Fri, 19 Apr 2013 14:13:30 +0000 (14:13 +0000)]
Fix the x87 FP register printout when issuing the “info float” command.
Consider the following simple program:
.globl _start
.text
_start:
fldt val
.data
val: .byte 0x00,0x00,0x45,0x07,0x11,0x19,0x22,0xe9,0xfe,0xbf
With current GDB on x86-64 GNU/Linux hosts, after the moment the fldt
command has been executed the register st(0) looks like this,
according to the “info regs” output (TOP=7):
R7: Valid 0xffffffbffffffffeffffffe922191107450000 -0.
910676542908976927
which is clearly wrong (just count its length). The problem is due to
the printf statement (see patch) printing a promoted integer value of
a char argument "raw[i]", and, since char is signed on x86-64
GNU/Linux, the erroneous “ffffff” are printed for the first three
bytes which turn out to be "negative". The fix is to use gdb_byte
instead which is unsigned (and is the type of value_contents(), the
type to be used for raw target bytes anyway). After the fix the value
will be printed correctly:
R7: Valid 0xbffee922191107450000 -0.
910676542908976927
gdb/
2013-04-19 Vladimir Kargov <kargov@gmail.com>
Pedro Alves <palves@redhat.com>
* i387-tdep.c (i387_print_float_info): Use gdb_byte for pointer to
value contents.
gdb/testsuite/
2013-04-19 Vladimir Kargov <kargov@gmail.com>
Pedro Alves <palves@redhat.com>
* gdb.arch/i386-float.S: New file.
* gdb.arch/i386-float.exp: New file.
Kai Tietz [Fri, 19 Apr 2013 09:10:28 +0000 (09:10 +0000)]
* configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.
Nick Clifton [Fri, 19 Apr 2013 08:12:30 +0000 (08:12 +0000)]
PR binutils/15356
* compress.c (decompress_contents): Always call inflateEnd, even
when another inflation operation fails.
[Note - the actual patch to compress.c was accidentally committed previously].
Alan Modra [Fri, 19 Apr 2013 00:00:04 +0000 (00:00 +0000)]
daily update
gdbadmin [Fri, 19 Apr 2013 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Luis Machado [Thu, 18 Apr 2013 10:08:08 +0000 (10:08 +0000)]
* gdb.mi/mi-var-create-rtti.exp: Create a variable of
type void *.
gdbadmin [Thu, 18 Apr 2013 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 18 Apr 2013 00:00:04 +0000 (00:00 +0000)]
daily update
Doug Evans [Wed, 17 Apr 2013 21:07:09 +0000 (21:07 +0000)]
* lib/dwarf.exp (Dwarf): New proc "tu".
* gdb.dwarf2/missing-sig-type.exp: New file.
Doug Evans [Wed, 17 Apr 2013 17:09:30 +0000 (17:09 +0000)]
* dwarf2read.c (struct signatured_type): New member type.
(struct attribute): Replace member signatured_type with signature.
(DW_SIGNATURE): Replaces DW_SIGNATURE_TYPE.
(read_call_site_scope): Call follow_die_ref instead of
follow_die_ref_or_sig.
(read_structure_type): Rewrite handling of signatured types.
(read_enumeration_type): Ditto.
(read_attribute_value): Update.
(build_error_marker_type): New function.
(lookup_die_type): Add assert. Rewrite handling of signatured types.
Don't call error for bad types, just build an error marker type.
(dump_die_shallow): Update.
(follow_die_sig_1): Renamed from follow_die_sig.
Don't call error for bad types, instead return NULL.
(follow_die_sig): New function.
(get_signatured_type, get_DW_AT_signature_type): New functions.
H.J. Lu [Wed, 17 Apr 2013 16:22:13 +0000 (16:22 +0000)]
Update copyright year on elf-ifunc.c
* elf-ifunc.c: Update copyright year.
Joel Brobecker [Wed, 17 Apr 2013 14:57:43 +0000 (14:57 +0000)]
Fix line length problem in last entry.
Yufeng Zhang [Wed, 17 Apr 2013 14:52:46 +0000 (14:52 +0000)]
gdb/
* aarch64-tdep.c (aarch64_write_pc): Removed.
(aarch64_gdbarch_init): Remove set_gdbarch_write_pc of the above function.
Nick Clifton [Wed, 17 Apr 2013 14:16:01 +0000 (14:16 +0000)]
* coffcode.h: Added a cast to void when a bfd_set_section_*()
macro's return value is ignored.
* elf32-hppa.c: Likewise.
* elf32-tic6x.c: Likewise.
* mach-o.c: Likewise.
* mmo.c: Likewise.
* opncls.c: Likewise.
* peicode.h: Likewise.
* elf32-m32r.c: Check return value of bfd_set_section_*().
* elfnn-ia64.c: Likewise.
* elfxx-mips.c: Likewise.
* vms-alpha.c: Likewise.
Nick Clifton [Wed, 17 Apr 2013 14:09:49 +0000 (14:09 +0000)]
PR binutils/15369
* cgen-dis.c (hash_insn_array): Use CGEN_CPU_INSN_ENDIAN instead
of CGEN_CPU_ENDIAN.
(hash_insns_list): Likewise.
Pedro Alves [Wed, 17 Apr 2013 09:58:15 +0000 (09:58 +0000)]
Use AC_DEFINE for USE_THREAD_DB
Use AC_DEFINE for USE_THREAD_DB instead of manually passing it down
through -D flags.
gdb/gdbserver/
2013-04-17 Pedro Alves <palves@redhat.com>
* configure.ac (USE_THREAD_DB): Delete variable.
(if test "$srv_linux_thread_db" = "yes"): AC_DEFINE USE_THREAD_DB.
Don't AC_SUBST USE_THREAD_DB.
* Makefile.in (INTERNAL_CFLAGS): Remove @USE_THREAD_DB@.
* config.in, configure: Regenerate.
Yao Qi [Wed, 17 Apr 2013 01:02:02 +0000 (01:02 +0000)]
gdb/
* top.c (print_gdb_configuration): Print configure-time
parameter on using libbabeltrace or not.
Alan Modra [Wed, 17 Apr 2013 00:00:04 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 17 Apr 2013 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Pedro Alves [Tue, 16 Apr 2013 18:22:15 +0000 (18:22 +0000)]
Only define 'struct lwp_info'::thread_known if using libthread-db.
A small cleanup. 'struct lwp_info'::thread_known is only useful for
thread-db.c.
gdbserver/
2013-04-16 Pedro Alves <palves@redhat.com>
* linux-low.h (struct lwp_info) <thread_known>: Move under
the USE_THREAD_DB #ifdef.
Pedro Alves [Tue, 16 Apr 2013 18:20:40 +0000 (18:20 +0000)]
Fix remaining GDBserver issues with !HAVE_THREAD_DB_H.
The previous patches are still not sufficient to build gdbserver with
our copy of thread_db.h.
../../../src/gdb/gdbserver/thread-db.c: In function ‘find_one_thread’:
../../../src/gdb/gdbserver/thread-db.c:316:6: error: ‘struct lwp_info’ has no member named ‘th’
../../../src/gdb/gdbserver/thread-db.c: In function ‘attach_thread’:
../../../src/gdb/gdbserver/thread-db.c:341:6: error: ‘struct lwp_info’ has no member named ‘th’
../../../src/gdb/gdbserver/thread-db.c: In function ‘thread_db_get_tls_address’:
../../../src/gdb/gdbserver/thread-db.c:514:47: error: ‘struct lwp_info’ has no member named ‘th’
make: *** [thread-db.o] Error 1
First, linux-low.h is including <thread_db.h> directly instead of our
gdb_thread_db.h, although thread-db.c includes the latter. Then the
'th' field of struct lwp_info is only defined if HAVE_THREAD_DB_H is
defined, which is not true if we're using our replacement copy of
thread_db.h. We have a USE_THREAD_DB symbol defined if we're building
thread-db.c that's ideal for this, however, it's currently only
defined when compiling linux-low.c (through a Makefile rule). The
patch makes it defined when compiling any file.
gdb/gdbserver/
2013-04-16 Pedro Alves <palves@redhat.com>
* Makefile.in (INTERNAL_CFLAGS): Add @USE_THREAD_DB@.
(linux-low.o): Delete rule.
* linux-low.h: Always include "gdb_thread_db.h" instead of
conditionally including thread_db.h.
(struct lwp_info) <th>: Guard with #ifdef USE_THREAD_DB instead of
HAVE_THREAD_DB_H.
Pedro Alves [Tue, 16 Apr 2013 18:19:14 +0000 (18:19 +0000)]
copyright.py: Don't update glibc_thread_db.h.
As glibc_thread_db.h is a 3rd party imported file, we should not
update its copyright year range in the new year process.
gdb/
2013-04-16 Pedro Alves <palves@redhat.com>
* copyright.py (EXCLUDE_LIST): Add gdb/common/glibc_thread_db.h.
Pedro Alves [Tue, 16 Apr 2013 18:18:12 +0000 (18:18 +0000)]
Fix previous entry.
Pedro Alves [Tue, 16 Apr 2013 18:17:11 +0000 (18:17 +0000)]
Update glibc_thread_db.h from upstream.
Attempting to build gdbserver with our copy of thread_db.h yields:
In file included from ../../../src/gdb/gdbserver/../common/gdb_thread_db.h:4:0,
from ../../../src/gdb/gdbserver/thread-db.c:30:
../../../src/gdb/gdbserver/../common/glibc_thread_db.h:108:3: error: unknown type name ‘uint32_t’
In file included from ../../../src/gdb/gdbserver/../common/gdb_thread_db.h:4:0,
from ../../../src/gdb/gdbserver/thread-db.c:30:
../../../src/gdb/gdbserver/../common/glibc_thread_db.h:199:5: error: unknown type name ‘uintptr_t’
../../../src/gdb/gdbserver/../common/glibc_thread_db.h:269:3: error: unknown type name ‘intptr_t’
../../../src/gdb/gdbserver/../common/glibc_thread_db.h:270:3: error: unknown type name ‘intptr_t’
We used to have a workaround for this, but the patch to import
gnulib's stdint.h removed it:
http://www.sourceware.org/ml/gdb-patches/2008-06/msg00050.html
and defs.h made to always include stdint.h. However, gdbserver
doesn't include stdint.h in its equivalent server.h.
Rather than working around the issue, I've imported a more recent
version from glibc, which itself includes <stdint.h>. Other than
copyright years and FSF snail mail address, the file hasn't been
touched since 2003 in glibc. AFAICS, our version was updated last in
2000-09-03.
A note on the apparent license change: before the previous patch, this
file's contents were part of gdb_thread_db.h, and we can see that its
license's text was changed in this patch
<http://sourceware.org/ml/gdb-patches/2009-03/msg00251.html>. That
was certainly just an easy to overlook grep/sed mistake that fell
through the cracks.
gdb/common/
2013-04-16 Pedro Alves <palves@redhat.com>
* glibc_thread_db.h: Update from upstream glibc
(git
568035b7874a099087b77f7bba3e36a1173787b0).