package/mpfr: replace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mksh: replace utf-8 apostrophe by ascii single quote

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/madplay: replace utf-8 hyphen by ascii hyphen

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libunwind: replace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/jemalloc: eplace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/collectd: replace utf-8 quote by ascii single quote

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/capnproto: replace utf-8 apostrophe by ascii single quote

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/vde2: replace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tekui: replace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sysklogd: replace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/reaver: replace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qemu: replace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libopenssl: replace utf-8 quote by ascii single quote

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libglu: replace utf-8 apostrophe by ascii single quote

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ffmpeg: replace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/assimp: replace utf-8 quote by ascii single quote

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/go: bump version to 1.12.5

Fixes a number of issues discovered since 1.12.4.  From the release notes:

go1.12.5 (released 2019/05/06) includes fixes to the compiler, the linker,
the go command, the runtime, and the os package.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/luarocks: bump to version 3.1.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-headers: drop support 4.20 headers

Now that support for 5.1 headers have been added, drop support for the
obsolete 4.20 series.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-headers: add support for Linux 5.1 kernel headers

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain/toolchain-external-andes-nds32: disable static build

Buildroot does not support static build with glibc. Since this external
toolchain uses glibc, disable static build with this toolchain.

Fixes:
http://autobuild.buildroot.net/results/3c93cfac81f15f4c18eb7ad578ad86bb7bcf1c12/
http://autobuild.buildroot.net/results/63994f51a2b224b66acfafe5b236249d867a507d/
http://autobuild.buildroot.net/results/96c3be922a96c50fbd8e68059f9ced8a2a75f9ab/

Cc: Nylon Chen <nylon7@andestech.com>
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cryptopp: replace utf-8 space by ascii character

Replace utf-8 NO-BREAK-SPACE (c2 a0) in comment line by simple
ascii space character.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/docker-cli: bump version to 18.09.6

Additional post-18.09.5 fixes:

Builder:
- Fixed COPY and ADD with multiple <src> to not invalidate cache if
  DOCKER_BUILDKIT=1.moby/moby#38964

Networking:
- Cleaned up the cluster provider when the agent is closed. docker/libnetwork#2354
- Windows: Now selects a random host port if the user does not specify a
  host port.  docker/libnetwork#2369
- --service-cluster-ip-range is now configurable for UCP install.
  docker/orca#10263

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/docker-engine: bump version to 18.09.6

Additional post-18.09.5 fixes:

Builder:
- Fixed COPY and ADD with multiple <src> to not invalidate cache if
  DOCKER_BUILDKIT=1.moby/moby#38964

Networking:
- Cleaned up the cluster provider when the agent is closed. docker/libnetwork#2354
- Windows: Now selects a random host port if the user does not specify a
  host port.  docker/libnetwork#2369
- --service-cluster-ip-range is now configurable for UCP install.
  docker/orca#10263

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libbsd: disable for nds32

There is no support for nds32 in libbsd.

Fixes:
  http://autobuild.buildroot.net/results/eb79fbd8283f62ca08b85d851e3c817e0354f85c/

Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

postgresql: disable spinlock support for nds32

Fixes:
  - http://autobuild.buildroot.net/results/881318dad8217be0cd0eb18ce3c5ab3aff216272
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/orc: bump version to 0.4.29

Contains a number of fixes. Release notes:

0.4.28: https://lists.freedesktop.org/archives/gstreamer-announce/2017-November/000449.html
0.4.29: https://lists.freedesktop.org/archives/gstreamer-announce/2019-April/000483.html

Also add a hash for the license file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gst1-shark: bump version to 0.6.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gst1-interpipe: bump version to 9af5b40

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/owfs: delay sysvinit start until after network and avahi

In its default configuration, owserver opens a TCP socket on the 'lo'
interface. However, in some situations, the 'lo' interface may not yet
be up until S40network is started. This causes owserver not to start its
TCP socket, which makes it impossible for the owfs client to connect to
it.

In addition, owserver may have avahi integration.

Therefore, delay the start of owserver and owfs until after S40network
and S50avahi-daemon.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nginx-naxsi: bump to version 0.56

Also add a hash for the license file.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nginx: bump to version 1.16.0

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/coreutils: install base64 under /bin iso /usr/bin to match busybox

Fixes #11816

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.0.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: Drop support for some packages from Petr Vorel

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gutenprint: bump to version 5.2.14

- Remove third and fourth patches (already in version)
- Add hash for license file
- Remove --without-foomatic options (not available anymore)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in.legacy: fix check-package warning

Order is type, depends, select.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gstreamer1/gstreamer1-editing-services: bump to version 1.16.0

Also removed upstreamed patch 0001-examples-ges-ui-fix-some-gtk2-ism.patch.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gstreamer1/gst1-validate: bump to version 1.16.0

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gstreamer1/gst1-libav: bump to version 1.16.0

In addition:
  - Allow gst1-libav to use the system ffmpeg, as 1.16.0 is compatible with
    ffmpeg 4.x.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gstreamer1/gst1-vaapi: bump to version 1.16.0

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gstreamer1/gst1-rtsp-server: bump to version 1.16.0

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gstreamer1/gst-omx: bump to version 1.16.0

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Peter: fix download hash]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gstreamer1/gst1-plugins-{base, good, bad, ugly}: bump to 1.16.0

Group these patches because of several changes to the plugin packages.

Changes:
  - Remove upstreamed patches:
      - 0001-fdkaacenc-Remove-MODE_2_1.patch
      - 0002-fdkaacdec-Use-WAV-channel-mapping-instead-of-interle.patch

  - Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_COMPOSITOR to Config.in.legacy as
    this plugin is moved to gst1-plugins-base.

  - Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_IQA to Config.in.legacy as this the
    plugin is now removed.

  - Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_OPENCV to Config.in.legacy as the
    plugin now requires opencv3 with the bgsegm opencv_contrib module, which is
    not in Buildroot.

  - Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_STEREO to Config.in.legacy as this
    plugin is merged with the audiofx plugin in gst1-plugins-good.

  - Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VCD to Config.in.legacy as this
    plugin is removed.

  - Remove COPYING.LIB from gst-plugins-base mk file and hash file as it no
    longer exists.

  - Add BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_COMPOSITOR to gst1-plugins-base.mk

  - Add BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_OVERLAYCOMPOSITION to
    gst1-plugins-base.

  - Add mjpegtools to the dependencies of
    BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MPEG2ENC

  - Remove BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_IQA because it now depends on
    the package dssim which isn't available in Buildroot.

  - Remove upstream patch
    0001-gstrtspconnection-Security-loophole-making-heap-over.patch

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gstreamer1/gstreamer1: bump to version 1.16.0

Also remove upstreamed patch 0001-gstconfig.h.in-initial-RISC-V-support.patch.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/minicom: bump to version 1e84585e8e7710677b6ff9a70dce5f3ad3e23540

Remove both patches since they've been upstreamed.

Add host-pkgconf to MINICOM_DEPENDENCIES and remove:
`MINICOM_CONF_ENV = PKG_CONFIG=/bin/false` since now pkg-config is
needed to build.

Shortlog follows:
git shortlog --no-merges  19ab49422f3431102c31fea01549121385113f80..
Adam Lackorzynski (9):
      Update project URL
      Updated translations
      Updated translations: pl and sv
      Translations: regen update
      Update danish translation
      Update of danish translation
      Update README
      Formatting fix
      More friendly mbslength test

Fabrice Fontaine (1):
      src/Makefile.am: fix ascii-xfr link with lintl

Giulio Benetti (2):
      TODO: remove Utf8 bug.
      sysdep1: check if RS485 is support before setting its parameters

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/nfs-utils: making nfs server optional

This patch makes nfs server component optional. This is useful when
only client tools are needed instead of the full nfs server.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/nfs-utils: fix unnecessary files removal

The removal of unnecessary files is currently broken by the fact that
the rm command is executed from the buildroot directory and not the
target directory.

This patch fixes the problem changing to target directory before
removing files.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/cryptopp: fix build with gcc < 4.9

Fixes:
 - http://autobuild.buildroot.org/results/7e68f32e62c34497848f0f7fc1f12dba67bf44d0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: re-order the assignments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/radvd: improve startup script

- Add start, stop and restart/reload options, following the logic used
  in other init scripts (e.g. S01syslogd).

- Do nothing if /etc/radvd.conf does not exist instead of printing an
  error message. It is valid to install radvd without a configuration
  file. The daemon may be started later by another service with a
  configuration created at run-time.

- Print an error message if the kernel does not support IPv6 forwarding,
  which is required by radvd.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

config: add defconfig for orangepi-r1

Very similar to orangepi-zero, except that the board has a 16MB SPI flash, a
2nd ethernet port is provided through a Realtek RTL8152 and wifi is provided
through a Realtek RTL8189FTV (no mainline driver, not supported).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/orangepi_zero: bump Linux to 4.19.38, U-boot to 2019.04

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kf5-kcoreaddons: fix build with atomic

Fixes:
 - http://autobuild.buildroot.org/results/d17c2fb420e395b995b2c2eef387f0c66e89c96c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libglib2: avoid printing null strings

GCC 9 is being stricter about passing null string pointers
to printf-like functions.

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-numpy: bump to version 1.16.3

Remove third patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openblas: bump to version 0.3.6

- Remove second and third patches (already in version)
- Add an upstream patch to fix build with glibc < 2.5

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cryptopp: bump to version 8.2.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/vlc: fix build with libvpx 1.8.0

Fixes
http://autobuild.buildroot.net/results/e44/e44d5ca85be9e0dafa4a3d8b0187c54cff6e2d55/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/samba4: bump version to 4.9.7

Release notes: https://www.samba.org/samba/history/samba-4.9.7.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: security bump version to 7.3.5

Release notes: https://www.php.net/archive/2019.php#id2019-05-02-1

Fixes 2019-11036:
* Heap-buffer-overflow in _estrndup via exif_process_IFD_TAG

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tor: bump version to 0.4.0.5

Release notes: https://blog.torproject.org/new-release-tor-0405

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xdriver_xf86-video-sis: drop unneeded third patch

This patch is not needed since version 0.10.8 and:
https://gitlab.freedesktop.org/xorg/driver/xf86-video-sis/commit/0f50f8c3db2b9f1c9d4ecab8ad278e9db6418a92

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libtorrent-rasterbar: bump to version 1.2.1

Remove all patches (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/armadeus_apf28_defconfig: bump Linux 4.9 version to latest one

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{9, 14, 19}.x / 5.0.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/docker-engine: bump to version 18.09.5

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/docker-cli: bump to version 18.09.5

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/docker-containerd: bump to version 1.2.6

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/runc: bump to version 1.0.0-rc8

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bird: BFD needs NPTL

Fixes:
 - http://autobuild.buildroot.org/results/ab9ab2cca2c191ae9a8f0ecb2aa2536a3f020301

uClibc linuxthreads does not provide pthread_spin_lock().

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpm: drop unneeded third patch

After upstream review, I found that the third patch is not needed, just
doing an autoreconf fix the linking issue with -lintl

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/network-manager: update to 1.18.0

A straightforward package update. Tested.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

.gitlab-ci.yml: add trigger per job

Triggering a single defconfig or runtime test job can be handy:
 - when adding or changing a defconfig;
 - when adding or changing a runtime test case;
 - when fixing some bug on a use case tested by a runtime test case.

Currently there are 3 subsets of jobs that can easily be triggered by
pushing a temporary branch with specific suffix:
 - to trigger only the check-* jobs:
   $ git push gitlab HEAD:<name>                   # currently   4 jobs
 - to trigger all defconfigs and all check-* jobs:
   $ git push gitlab HEAD:<name>-defconfigs        # currently 197 jobs
 - to trigger all runtime tests and all check-* jobs:
   $ git push gitlab HEAD:<name>-runtime-tests     # currently 118 jobs

When the user wants to trigger a single defconfig or runtime test job,
hand-editing the .gitlab-ci.yml and creating a temporary commit are
currently needed.

Add 2 more subsets that can be triggered based on the name of the
branch pushed.
 - to trigger one defconfig job:
   $ git push gitlab HEAD:<name>-<defconfig name>  # currently   1 jobs
 - to trigger one runtime job:
   $ git push gitlab HEAD:<name>-<test case name>  # currently   1 jobs

The check-* jobs are fast, so there is no need to add a per job trigger
for them. Also, they are anyway triggered with every push already.

While adding those new triggers, use the full name of the job as suffix.
This leads to large branch names:
$ git push gitlab HEAD:test1-tests.toolchain.test_external.TestExternalToolchainBuildrootuClibc
$ git push gitlab HEAD:test2-olimex_a20_olinuxino_lime_legacy_defconfig
But those branches are temporary, and this way the user doesn't need to
think much, just copy and paste the job name as suffix.

The hidden keys that now hold the commonalities between jobs does not
hold only a script anymore, so rename then from *_script to *_base.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: squash two patches]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/systemd: fix build due to missing -lrt

Fixes:
 - http://autobuild.buildroot.org/results/a27d2e865ca620b6b2c6f39a07385f74fcfbb385

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/systemd: fix patch order

Rename 0002-install-don-t-use-ln-relative.patch to
0001-install-don-t-use-ln-relative.patch as there is two 0002-xxx
patches

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/network-manager: don't use --disable-crashtrace

It was removed long ago and does nothing.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libtorrent-rasterbar: needs gcc >= 4.9

Needs C++11 since bump to version 1.2.0

Fixes:
 - http://autobuild.buildroot.org/results/73481ae2e5736c8042ec7911f1378623bd3de74d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/liburiparser: fix build without C++

Fixes:
 - http://autobuild.buildroot.org/results/1e191676f28905a81de6282e07978aa5d4f02039

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gerbera: fix build with latest exiv2

After the bump to exiv2 0.27.1 a build error due to missing header
inclusion appeared.

Fixes:
http://autobuild.buildroot.net/results/3831acf7f4c5a9f1a404e0ced3d6bec7a2249601/
http://autobuild.buildroot.net/results/de0545462c6017fe54acc284b914b9fa8b0172d8/

The patch is waiting merge into the mainline
https://github.com/gerbera/gerbera/pull/457

Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
[Arnout: include as a patch instead of downloading it, due to hash]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mono: bump to version 5.20.1.27

This patch bumps mono to version 5.20.1.27 and it's monolite dependency
to version B886E13F-6276-4BE5-85F8-C6BF5EDBD200.
It also adapt the monolite path to updated mono version.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-pillow: bump to version 6.0.0

This patch bumps python-pillow to version 6.0.0.
Hash for LICENSE file is changed because of a copyright year update.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/uboot-tools: fix build with host-openssl

As suggested by Arnout during review of previous iteration, add a patch
to uboot-tools so it uses CFLAGS and not HOSTCFLAGS when building cross
tools

Fixes:
 - http://autobuild.buildroot.org/results/915b509e814bda16be54a24276b9c740c51e5770

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libzip: add host variant

The updated host mfgtool package needs the host variant of libzip.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python-flask-sqlalchemy: bump to version 2.3.2

Also update hash for license file due to additional information.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-sqlalchemy: bump to version .3.3

Also update hash for license file due to copyright year bump.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-flask: bump to version 1.0.2

Also add hash for the license file.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-jinja2: bump to version 2.10.1

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-mutagen: bump to version 1.42.0

Also add hash for the license file.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-psycopg2: bump to version 2.8.2

Also remove upstream patch and change the hash for the license file due to
url changes.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-itsdangerous: bump to version 1.1.0

Also add a hash for the license file, and change the license file to LICENSE.rst
as LICENSE no longer exists.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-werkzeug: bump to version 0.15.2

Also add hash for the license file, and change the license file to LICENSE.rst
as LICENSE no longer exists.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-markupsafe: bump to version 1.1.1

Also add hash for the license file.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-pip: bump to version 19.1

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python{3}-setuptools: bump to version 41.0.1

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mjpegtools: install to staging

The mpeg2enc plugin in gst1-plugins-bad now depends on mjpegtools.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libvpx: bump to version v1.8.0

The gst1-plugins-good 1.16.0 vpx plugin requires libvpx v1.8.0

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/netcat-openbsd: switch to new upstream URL

anonscm.debian.org has been discontinued and now hosts a page pointing
to salsa.debian.org.  Switch to the new upstream URL, explicitly setting
the method to git now that we use an HTTPS URL.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/luv: bump to version 1.28.0-1

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/luarocks: bump to version 3.1.0

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/atmel_sama5d27_som1: bump to linux4sam_6.0

This commit :
- bumps Linux & U-Boot to linux4sam_6.0.
- bumps at91bootstrap to v3.8.12.
- removes old in-tree dts (now in dt-overlay-at91 [1][2])
- adapts genimage accordingly.

[1] https://github.com/linux4sam/dt-overlay-at91/tree/master/sama5d27_som1_ek
[2] http://www.at91.com/linux4sam/bin/view/Linux4SAM/DT-Overlay

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>