2005-12-09  Randolph Chung  <tausq@debian.org>

* gdb.arch/pa-nullify.exp: Handle hppa64-*-* targets.
(get_addr_of_sym): Remove duplicate print.
(gen_core): xfail hppa*-*-hpux*, update expected output.
* gdb.arch/pa-nullify.s: Reformat to also work on HPUX.
* gdb.arch/pa64-nullify.s: New file.

2005-12-09  Randolph Chung  <tausq@debian.org>

* gdb.base/dump.exp: Mark hppa64-*-* as 64-bit target.

*** empty log message ***

daily update

* NEWS (Changes in GDB 6.4): Delete entries indicating that
the following configurations have been removed: h8300*-*-*,
mn10300-*-*, and v850-*-*.  These configurations had been
removed within the 6.4 development cycle, but were later
restored within the same cycle.

opcodes/
2005-12-08  Jan Beulich  <jbeulich@novell.com>

* i386-dis.c (MAXLEN): Reduce to architectural limit.
(fetch_data): Check for sufficient buffer size.

bfd/
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add emit_stub_syms.
(ppc_elf_select_plt_layout): Add emit_stub_syms param, save to htab.
(add_stub_sym): New function.
(allocate_dynrelocs): Call add_stub_sym.
(ppc_elf_size_dynamic_sections): Emit __glink and __glink_PLTresolve
when emit_stub_syms.
* elf32-ppc.h (ppc_elf_select_plt_layout): Update prototype.
ld/
* emultempl/ppc32elf.em (emit_stub_syms): New var.
(ppc_after_open): Pass it to ppc_elf_select_plt_layout.
(PARSE_AND_LIST_PROLOGUE <OPTION_STUBSYMS>): Define.
(PARSE_AND_LIST_LONGOPTS): Add emit-stub-syms.
(PARSE_AND_LIST_OPTIONS): Describe emit-stub-syms.
(PARSE_AND_LIST_OPTIONS): Handle it.

* pe-dll.c (build_filler_bfd): Conform error message to standard.
(pe_dll_generate_implib): Use %E in error message.
(add_bfd_to_link): Likewise.
(pe_implied_import_dll): Likewise.

opcodes/
2005-12-08  Jan Beulich  <jbeulich@novell.com>

* i386-dis.c (OP_ST): Remove prefix in Intel mode.

* reloc.c (enum complain_overflow): Correct comments.
(bfd_check_overflow): Combine complain_overflow_bitfield and
complain_overflow_signed code.
(_bfd_relocate_contents): Likewise.
(bfd_howto_32): Use complain_overflow_dont.
* elf32-d10v.c (elf_d10v_howto_table): Revert 2002-06-17 change.
* bfd-in2.h: Regenerate.

Add ms2 support.
* ms1-tdep.c (ms1_register_type): Check for ms2.
(ms1_breakpoint_from_pc): ms2 has a different break instruction.
(ms1_pseudo_register_read, ms1_pseudo_register_write,
ms1_registers_info): Add ms2.
  * NEWS (Changes since GDB 6.4): Add ms2

* i386-dis.c (dofloat): Handle %rip-relative floating point addressing.

2005-12-07  H.J. Lu  <hongjiu.lu@intel.com>

* elf.c (assign_section_numbers): Remove extra code in the last
change.

2005-12-08  Randolph Chung  <tausq@debian.org>

* somread.c (som_symfile_offsets): Iterate through number of sections
in addrs instead of objfile.

*** empty log message ***

gdb/
* valops.c (value_struct_elt): Clarify error message.
gdb/testsuite/
2005-12-07  Christophe Lyon  <christophe.lyon@st.com>
* gdb.cp/printmethod.cc (main): Call virt and nonvirt, to force
code generation for these functions.
* gdb.cp/printmethod.exp: Expect "&A::nonvirt()" instead of an
error message.

daily update

gdb/ChangeLog:
2005-12-07  Jim Blandy  <jimb@redhat.com>

* target.c (target_xfer_memory_partial): Doc fix.

2005-12-07  Jim Blandy  <jimb@redhat.com>

* ax-general.c (ax_reqs): Check stack heights for backward jumps,
too.  Correctly check height at target.  Doc fixes.

2005-12-07  H.J. Lu  <hongjiu.lu@intel.com>
    Andreas Schwab  <schwab@suse.de>

PR binutils/1991
* elf.c (assign_section_numbers): Always use the output section
when setting up sh_link for SHF_LINK_ORDER.

bfd/

2005-12-07  Thiemo Seufer  <ths@networkno.de>
    H.J. Lu  <hongjiu.lu@intel.com>

PR ld/1932
* bfd-in.h (bfd_elf_record_link_assignment): Add output_bfd
and hidden arguments.

* bfd.c (bfd_hide_symbol): Removed.

* bfd-in2.h: Regenerated.

* elflink.c (bfd_elf_record_link_assignment): Handle hidden
symbols which were provided by a linker script.

ld/

2005-12-07  Thiemo Seufer  <ths@networkno.de>
    H.J. Lu  <hongjiu.lu@intel.com>

PR ld/1932
* emultempl/elf32.em (gld${EMULATION_NAME}_find_exp_assignment):
Adjust bfd_elf_record_link_assignment call.

* ldexp.c (exp_fold_tree_1): Remove call to bfd_hide_symbol.

* cris-opc.c (cris_opcodes) <"move" "s,P">: Define using
MOVE_M_TO_PREG_OPCODE and MOVE_M_TO_PREG_ZBITS instead of constants.

* cris.h (MOVE_M_TO_PREG_OPCODE, MOVE_M_TO_PREG_ZBITS)
(MOVE_PC_INCR_OPCODE_PREFIX, MOVE_PC_INCR_OPCODE_SUFFIX): New macros.
(ADD_PC_INCR_OPCODE): Don't define.

* gas/cris/rd-bcnst-pic.d, gas/cris/rd-branch-pic.d,
gas/cris/rd-brokw-pic-1.d, gas/cris/rd-brokw-pic-2.d,
gas/cris/rd-brokw-pic-3.d, gas/cris/rd-fragtest-pic.d: New tests.

Change 32-bit-branch expansion for --pic.
* config/tc-cris.c (STATE_COND_BRANCH_PIC): New relaxation state.
(md_cris_relax_table): Add entry for STATE_COND_BRANCH_PIC.
(cris_any_v0_v10_long_jump_size_pic): New macro.
(md_estimate_size_before_relax): Handle STATE_COND_BRANCH_PIC.
(md_convert_frag): Similar.
(md_create_long_jump): Change 32-bit-branch expansion for --pic.
(md_assemble, gen_cond_branch_32): Adjust similarly.
(md_parse_option) <case OPTION_PIC>: Adjust md_long_jump_size.
<case OPTION_ARCH>: Similar, if --pic.

Add missing ChangeLog entry

*** empty log message ***

* cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.

* sim/cris/asm/movmp8.ms, sim/cris/asm/pcplus.ms: New tests.
* sim/cris/asm/movmp.ms: Do not write to P0, P4 or P8.
* sim/cris/asm/raw13.ms: Write to MOF instead of WZ (P4).

2005-12-06  Michael Snyder  <msnyder@redhat.com>

* cli/cli-decode.c (add_setshow_string_cmd): Indent.
(add_setshow_integer_cmd): Indent.

2005-12-06  Michael Snyder  <msnyder@redhat.com>

* inf-ptrace.c: Fix typos in comments.

* cris.cpu (simplecris-common-writable-specregs)
(simplecris-common-readable-specregs): Split from
simplecris-common-specregs.  All users changed.
(cris-implemented-writable-specregs-v0)
(cris-implemented-readable-specregs-v0): Similar from
cris-implemented-specregs-v0.
(cris-implemented-writable-specregs-v3)
(cris-implemented-readable-specregs-v3)
(cris-implemented-writable-specregs-v8)
(cris-implemented-readable-specregs-v8)
(cris-implemented-writable-specregs-v10)
(cris-implemented-readable-specregs-v10)
(cris-implemented-writable-specregs-v32)
(cris-implemented-readable-specregs-v32): Similar.
(bdap-32-pc, move-m-pcplus-p0, move-m-spplus-p8): New
insns and specializations.

gas/

2005-12-06  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/1874
* config/tc-i386.c (match_template): Handle monitor.
(process_suffix): Likewise.

gas/testsuite/

2005-12-06  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/1874
* gas/i386/i386.exp: Add x86-64-prescott for 64bit.

* gas/i386/prescott.s: Test address size override for monitor.
* gas/i386/prescott.d: Updated.

* gas/i386/x86-64-prescott.d: New file.
* gas/i386/x86-64-prescott.s: Likewise.

include/opcode/

2005-12-06  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/1874
* i386.h (i386_optab): Add 64bit support for monitor and mwait.

opcodes/

2005-12-06  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/1874
* i386-dis.c (address_mode): New enum type.
(address_mode): New variable.
(mode_64bit): Removed.
(ckprefix): Updated to check address_mode instead of mode_64bit.
(prefix_name): Likewise.
(print_insn): Likewise.
(putop): Likewise.
(print_operand_value): Likewise.
(intel_operand_size): Likewise.
(OP_E): Likewise.
(OP_G): Likewise.
(set_op): Likewise.
(OP_REG): Likewise.
(OP_I): Likewise.
(OP_I64): Likewise.
(OP_OFF): Likewise.
(OP_OFF64): Likewise.
(ptr_reg): Likewise.
(OP_C): Likewise.
(SVME_Fixup): Likewise.
(print_insn): Set address_mode.
(PNI_Fixup): Add 64bit and address size override support for
monitor and mwait.

* cpu-powerpc.c (bfd_powerpc_archs): Add ppc 750.

* mi/mi-interp.c (mi_interpreter_resume): Route target error
through the MI.

*** empty log message ***

* cris-dis.c (bytes_to_skip): Handle new parameter prefix_matchedp.
(print_with_operands): Check for prefix when [PC+] is seen.

* gas/cris/rd-pcplus.s, gas/cris/rd-pcplus.d: New test.

daily update

Bug gas/1948
* symbols.c (colon): Also check if now_seg is bss_section when a symbol
is being redefined.

toplevel:
2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

Sync with gcc:

2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

        * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
        CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
        "CONFIGURED_" from the AC_CHECK_PROGS invocation.  Move below.
        Find in-tree tools if available.
        (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
        (CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
        (*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
        (COMPILER_*_FOR_TARGET): New.
        * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
        (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
        (CONFIGURED_*, USUAL_*): Remove.
        (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
        STRIP): Use autoconf substitutions.
        (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
        COMPILER_NM_FOR_TARGET): New.
        (EXTRA_HOST_FLAGS): Pass LIPO and STRIP.

        (all): Make all-host and all-target in parallel.
        (do-[+make_target+], do-check, install, [+compare-target+]): Ensure
        that $$r and $$s are set before invoking a recursive make.
        (stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
        ([+bootstrap-target+]): Inline most of the `all' target.

2005-11-29  Ben Elliston  <bje@au.ibm.com>

        * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
        from the gcc build directory.
        * Makefile.in: Regenerate.

2005-11-29  Ben Elliston  <bje@au.ibm.com>

        * Makefile.def: Add new libdecnumber host_module.  Make all-gcc
        depend on all-libdecnumber.
        * configure.in (host_libs): Include libdecnumber.
        * Makefile.in: Regenerate.
        * configure: Likewise.

2005-11-21  Kean Johnston  <jkj@sco.com>

        * config.sub, config.guess: Sync from upstream sources.

config:
2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

* acx.m4 (GCC_TARGET_TOOL): New.

* cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
cris/semcrisv32f-switch.c: Regenerate.

Fix typo last entry

*** empty log message ***

daily update

* amd64obsd-tdep.c: Include "regcache.h" and "bsd-uthread.h".
(amd64obsd_uthread_reg_offset): New variable.
(AMD64OBSD_UTHREAD_RSP_OFFSET): New define.
(amd64obsd_supply_uthread, amd64obsd_collect_uthread): New
functions.
(amd64obsd_init_abi): Set supply_uthread and collect_uthread.
* Makefile.in (amd64obsd-tdep.o): Update dependencies.

* elf64-hppa.c (elf64_hppa_section_from_phdr): Create .kernel
pseudo-section.  Make sure .reg section comes after the proc
section it's generated from.

*** empty log message ***

daily update

* gdb.texinfo (Connecting): Explain that `monitor' is a way to
extend GDB with commands for external monitor.

*** empty log message ***

daily update

config/tc-z80.c (emit_ldreg): fix bug in ld rr,<xx>

2005-12-02  Dave Brolley  <brolley@redhat.com>

        * configure.in (cgen_files): Add cgen-bitset.lo.
        (ta): Add cgen-bitset.lo when arch==bfd_cris_arch.
        * Makefile.am (CFILES): Add cgen-bitset.c.
        (ALL_MACHINES): Add cgen-bitset.lo.
        (cgen-bitset.lo): New target.
        * cgen-opc.c (cgen_bitset_create, cgen_bitset_init, cgen_bitset_clear)
        (cgen_bitset_add, cgen_bitset_set, cgen_bitset_contains)
        (cgen_bitset_compare, cgen_bitset_intersect_p, cgen_bitset_copy)
        (cgen_bitset_union): Moved from here ...
        * cgen-bitset.c: ... to here. New file.
        * Makefile.in: Regenerated.
        * configure: Regenerated.

2005-12-02  Andrew Stubbs  <andrew.stubbs@st.com>

* breakpoint.c (BREAK_ARGS_HELP): New mecro.
(_initialize_breakpoint): Enhance break, tbreak, hbreak and thbreak
commands' help by adding more information and using BREAK_ARGS_HELP
to duplicate the common parts.  Remove now-redundant cross-references.

testsuite/
* gdb.base/help.exp (help b, help br, help bre, help brea)
(help break): Update the expected message.

2005-12-02  Andrew Stubbs  <andrew.stubbs@st.com>

* value.c (init_if_undefined_command): New function.
(_initialize_values): Add command init-if-undefined.
* NEWS (Changes since GDB 6.3): Rename to 'Changes in GDB 6.4'.
(Changes since GDB 6.4): New section.
Mention new command init-if-undefined.

doc/
* gdb.texinfo (Convenience variables): Add init-if-undefined command.

2005-12-02  Andrew Stubbs  <andrew.stubbs@st.com>

* symfile.c (symbol_file_clear): Test symfile_objfile is not NULL
before dereferencing it.
Gettextize the query.

   GDB 6.4 released from GDB 6.4 branch.

*** empty log message ***

daily update

* ms1-tdep.c (ms1_register_name): Const qualify array.
(ms1_registers_info): Use gdb_byte.
(ms1_push_dummy_call): Likewise.
(ms1_gdbarch_init): Remove illformed nested prototype.

* elf32-m32r.c (m32r_elf_sweep_hook): Fix an illegal duplicate check.
(m32r_elf_relocate_section): Fix R_M32R_10_PCREL_RELA linkage bug.
(m32r_elf_gc_sweep_hook): Likewise.
(m32r_elf_check_relocs): Likewise.

*** empty log message ***

daily update

Add Finnish translation

*** empty log message ***

daily update

* dwarf2-frame.c (dwarf2_frame_prev_register): Handle
DWARF2_FRAME_REG_CFA_OFFSET.
* dwarf2-frame.h (enum dwarf2_frame_reg_rule): Add
DWARF2_FRAME_REG_CFA_OFFSET.

* sim-signal.c (sim_signal_to_target): Fix typos.

*** empty log message ***

* configure.ac (USE_WIN32API): Define it.
* configure.in: Regenerate.
* config.in: Likewise.
* emul_netbsd.c (write_timezone): Guard with HAVE_GETTIMEOFDAY.
* emul_unix.c (do_unix_mkdir): Handle Win32 1-argument mkdir.

daily update

* psim.c: Include gdb/signals.h.

* remote-sim.c (gdbsim_wait): Pass target signal numbers to
sim_resume.  Expect target signal numbers from sim_stop_reason.

* wrapper.c (gdb/signals.h): Include it.
(SIGTRAP): Don't define.
(SIGBUS): Likewise.
(sim_stop_reason): Use TARGET_SIGNAL_* instead of SIG*.

* sim-reason.c (sim_stop_reason): Use
sim_signal_to_target, not sim_signal_to_host.
* sim-signal.c (sim_signal_to_host): Fix typo.
(sim_signal_to_target): New function.

* interp.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.

* interf.c: (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.

* sim_calls.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* psim.c (cntrl_c_simulation): Use TARGET_SIGNAL_*.

Fix changelog typo.

* win32-nat.c (env_sort): New function.
(win32_create_inferior): Rename env to in_env.  Sort environment before handing
it off to CreateProcess.
(win32_current_sos): Quiet a compiler warning.

*** empty log message ***

daily update

*** empty log message ***

daily update

gas/ acinclude.m4 aclocal.m4 app.c app.o as.c as.h as.h.cvs asintl.h as-new as.o atof-generic.c atof-generic.o atof-ieee.o autom4te.cache bignum.h bit_fix.h cgen.c cgen.h ChangeLog ChangeLog-0001 ChangeLog-0203 ChangeLog.~1.2755.~ ChangeLog-9295 ChangeLog-9697 ChangeLog-9899 cond.c cond.o config config.cache config.h config.in config.log config.status configure configure.in configure.tgt CONTRIBUTORS COPYING CVS debug.c DEP2 DEPDIR depend.c depend.o dep-in.sed DEPOBJ dep.sed DEPTC doc dw2gencfi.c dw2gencfi.h dw2gencfi.o dwarf2dbg.c dwarf2dbg.h dwarf2dbg.o ecoff.c ecoff.h ecoff.o ehopt.c ehopt.o emul.h emul-target.h expr.c expr.c.cvs expr.h expr.o flonum-copy.c flonum-copy.o flonum.h flonum-konst.c flonum-konst.o flonum-mult.c flonum-mult.o frags.c frags.h frags.o gdbinit.in hash.c hash.h hash.o input-file.c input-file.h input-file.o input-scrub.c input-scrub.o itbl-cpu.h itbl-lex.h itbl-lex.l itbl-ops.c itbl-ops.h itbl-parse.y libtool listing.c listing.h listing.o literal.c literal.o long.s macro.c macro.c.bak macro.h macro.o MAINTAINERS Makefile Makefile.am Makefile.in messages.c messages.o NEWS obj-coff.o obj-format.h obj.h output-file.c output-file.h output-file.o po read.c read.h README read.o sb.c sb.h sb.o site.bak site.exp stabs.c stabs.o stamp-h1 stamp-h.in struc-symbol.h subsegs.c subsegs.h subsegs.o symbols.c symbols.h symbols.o targ-cpu.h targ-env.h tc.h tc-z80.o testsuite write.c write.h write.o config/tc-z80.c (z80_start_line_hook): issue an error when redefining a symbol with equ acinclude.m4 aclocal.m4 app.c app.o as.c as.h as.h.cvs asintl.h as-new as.o atof-generic.c atof-generic.o atof-ieee.o autom4te.cache bignum.h bit_fix.h cgen.c cgen.h ChangeLog ChangeLog-0001 ChangeLog-0203 ChangeLog.~1.2755.~ ChangeLog-9295 ChangeLog-9697 ChangeLog-9899 cond.c cond.o config config.cache config.h config.in config.log config.status configure configure.in configure.tgt CONTRIBUTORS COPYING CVS debug.c DEP2 DEPDIR depend.c depend.o dep-in.sed DEPOBJ dep.sed DEPTC doc dw2gencfi.c dw2gencfi.h dw2gencfi.o dwarf2dbg.c dwarf2dbg.h dwarf2dbg.o ecoff.c ecoff.h ecoff.o ehopt.c ehopt.o emul.h emul-target.h expr.c expr.c.cvs expr.h expr.o flonum-copy.c flonum-copy.o flonum.h flonum-konst.c flonum-konst.o flonum-mult.c flonum-mult.o frags.c frags.h frags.o gdbinit.in hash.c hash.h hash.o input-file.c input-file.h input-file.o input-scrub.c input-scrub.o itbl-cpu.h itbl-lex.h itbl-lex.l itbl-ops.c itbl-ops.h itbl-parse.y libtool listing.c listing.h listing.o literal.c literal.o long.s macro.c macro.c.bak macro.h macro.o MAINTAINERS Makefile Makefile.am Makefile.in messages.c messages.o NEWS obj-coff.o obj-format.h obj.h output-file.c output-file.h output-file.o po read.c read.h README read.o sb.c sb.h sb.o site.bak site.exp stabs.c stabs.o stamp-h1 stamp-h.in struc-symbol.h subsegs.c subsegs.h subsegs.o symbols.c symbols.h symbols.o targ-cpu.h targ-env.h tc.h tc-z80.o testsuite write.c write.h write.o doc/as.texinfo(equ<z80>): mention difference with .equiv acinclude.m4 aclocal.m4 app.c app.o as.c as.h as.h.cvs asintl.h as-new as.o atof-generic.c atof-generic.o atof-ieee.o autom4te.cache bignum.h bit_fix.h cgen.c cgen.h ChangeLog ChangeLog-0001 ChangeLog-0203 ChangeLog.~1.2755.~ ChangeLog-9295 ChangeLog-9697 ChangeLog-9899 cond.c cond.o config config.cache config.h config.in config.log config.status configure configure.in configure.tgt CONTRIBUTORS COPYING CVS debug.c DEP2 DEPDIR depend.c depend.o dep-in.sed DEPOBJ dep.sed DEPTC doc dw2gencfi.c dw2gencfi.h dw2gencfi.o dwarf2dbg.c dwarf2dbg.h dwarf2dbg.o ecoff.c ecoff.h ecoff.o ehopt.c ehopt.o emul.h emul-target.h expr.c expr.c.cvs expr.h expr.o flonum-copy.c flonum-copy.o flonum.h flonum-konst.c flonum-konst.o flonum-mult.c flonum-mult.o frags.c frags.h frags.o gdbinit.in hash.c hash.h hash.o input-file.c input-file.h input-file.o input-scrub.c input-scrub.o itbl-cpu.h itbl-lex.h itbl-lex.l itbl-ops.c itbl-ops.h itbl-parse.y libtool listing.c listing.h listing.o literal.c literal.o long.s macro.c macro.c.bak macro.h macro.o MAINTAINERS Makefile Makefile.am Makefile.in messages.c messages.o NEWS obj-coff.o obj-format.h obj.h output-file.c output-file.h output-file.o po read.c read.h README read.o sb.c sb.h sb.o site.bak site.exp stabs.c stabs.o stamp-h1 stamp-h.in struc-symbol.h subsegs.c subsegs.h subsegs.o symbols.c symbols.h symbols.o targ-cpu.h targ-env.h tc.h tc-z80.o testsuite write.c write.h write.o doc/as.texinfo(err): fix typo acinclude.m4 aclocal.m4 app.c app.o as.c as.h as.h.cvs asintl.h as-new as.o atof-generic.c atof-generic.o atof-ieee.o autom4te.cache bignum.h bit_fix.h cgen.c cgen.h ChangeLog ChangeLog-0001 ChangeLog-0203 ChangeLog.~1.2755.~ ChangeLog-9295 ChangeLog-9697 ChangeLog-9899 cond.c cond.o config config.cache config.h config.in config.log config.status configure configure.in configure.tgt CONTRIBUTORS COPYING CVS debug.c DEP2 DEPDIR depend.c depend.o dep-in.sed DEPOBJ dep.sed DEPTC doc dw2gencfi.c dw2gencfi.h dw2gencfi.o dwarf2dbg.c dwarf2dbg.h dwarf2dbg.o ecoff.c ecoff.h ecoff.o ehopt.c ehopt.o emul.h emul-target.h expr.c expr.c.cvs expr.h expr.o flonum-copy.c flonum-copy.o flonum.h flonum-konst.c flonum-konst.o flonum-mult.c flonum-mult.o frags.c frags.h frags.o gdbinit.in hash.c hash.h hash.o input-file.c input-file.h input-file.o input-scrub.c input-scrub.o itbl-cpu.h itbl-lex.h itbl-lex.l itbl-ops.c itbl-ops.h itbl-parse.y libtool listing.c listing.h listing.o literal.c literal.o long.s macro.c macro.c.bak macro.h macro.o MAINTAINERS Makefile Makefile.am Makefile.in messages.c messages.o NEWS obj-coff.o obj-format.h obj.h output-file.c output-file.h output-file.o po read.c read.h README read.o sb.c sb.h sb.o site.bak site.exp stabs.c stabs.o stamp-h1 stamp-h.in struc-symbol.h subsegs.c subsegs.h subsegs.o symbols.c symbols.h symbols.o targ-cpu.h targ-env.h tc.h tc-z80.o testsuite write.c write.h write.o doc/c-z80.texi(equ): redefining a symbol with equ is no longer allowed

    * gdbint.texinfo (Start of New Year Procedure): New chapter.

*** empty log message ***

daily update

2005-11-16  Andrew Stubbs  <andrew.stubbs@st.com>

* event-top.h (async_init_signals): Add SIGTERM handler.
(handle_sigterm): New function.
* event-top.h (handle_sigterm): New prototype.

Remove stray colon.

2005-11-25  Andrew Stubbs  <andrew.stubbs@st.com>

* cli-decode.c (find_command_name_length): New function.
(lookup_cmd_1): Replace loop reading command name with
find_command_name_length().
(lookup_cmd): Likewise.
(lookup_cmd_composition): Likewise.

ld/
2005-11-25  Jan Beulich  <jbeulich@novell.com>

* Makefile.am: Make configdoc.texi writeable before trying
to write to it.
* Makefile.in: Refresh.

* dwarf2-frame.c: (execute_cfa_program): Don't access past the
allocated dwarf2_frame_state.initial.regs.

* MAINTAINERS (Write After Approval): Add myself to the list.

* gas/macros/purge.l: Increment line numbers.
* gas/macros/purge.s: Add ".data" line.

Bug gas/1896
* config/tc-hppa.c (hppa_fix_adjustable): Don't reject for reduction
R_HPPA relocations that are 32-bits wide.
* gas/all/redef2.d: Allow "$DATA$" as well as ".data" in matches.
* gas/all/weakref1.d: Allow "$CODE$" as well as ".text" in matches.
* gas/hppa/reloc/reloc.exp: Adjust regexp for new output.

*** empty log message ***

daily update

bfd/
* elf-bfd.h (_bfd_generic_match_sections_by_type): Don't define.
* libbfd-in.h (_bfd_generic_match_sections_by_type): Delete.
* libbfd.c (_bfd_generic_match_sections_by_type): Delete.
* targets.c (bfd_match_sections_by_type): Don't define.
(BFD_JUMP_TABLE_LINK): Remove _bfd_generic_match_sections_by_type.
* coff-rs6000.c (rs6000coff_vec, pmac_xcoff_vec): Likewise.
* coff64-rs6000.c (rs6000coff64_vec, aix5coff64_vec): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
ld/
* ldlang.c (lang_output_section_find_by_flags): Add match_type param.
Run two passes, first using match_type, second without.
* ldlang.h (lang_match_sec_type_func): New typedef.
(lang_output_section_find_by_flags): Update prototype.
bfd_match_sections_by_type and lang_output_section_find_by_flags.
* emultempl/pe.em (place_orphan): Likewise.

* ldlang.c (lang_insert_orphan): Skip first assignment to dot
in script when looking for place to insert orphan statements.

*** empty log message ***

daily update

2005-11-23  Andrew Stubbs  <andrew.stubbs@st.com>

* sh-tdep.c (do_fv_register_info, do_dr_register_info): Delete function.
(do_bank_register_info, do_bank_register_info): Likewise.
(sh_print_pseudo_register, sh_do_fp_register): Likewise.
(sh_do_register, sh_print_register, sh_print_registers_info): Likewise.
(sh_gdbarch_init): Remove call to set_gdbarch_print_registers_info().

bfd/
* elf32-mips.c (elf_mips_howto_table_rel): Use rightshift 2 for
R_MIPS_PC16.
(mips_reloc_map): Map BFD_RELOC_16_PCREL_S2 to R_MIPS_PC16.
(bfd_elf32_bfd_reloc_type_lookup): Don't handle
BFD_RELOC_16_PCREL_S2.
* elf64-mips.c (mips_elf64_howto_table_rel): Use rightshift 2 for
R_MIPS_PC16.
(mips_elf64_howto_table_rela): Likewise.
(mips_reloc_map): Map BFD_RELOC_16_PCREL_S2 to R_MIPS_PC16.
(bfd_elf64_bfd_reloc_type_lookup): Don't handle
BFD_RELOC_16_PCREL_S2.
* elfn32-mips.c (elf_mips_howto_table_rel): Use rightshift 2 for
R_MIPS_PC16.
(elf_mips_howto_table_rela): Likewise.
(mips_reloc_map): Map BFD_RELOC_16_PCREL_S2 to R_MIPS_PC16.
(bfd_elf32_bfd_reloc_type_lookup): Don't handle
BFD_RELOC_16_PCREL_S2.
* elfxx-mips.c: Formatting fixes.
(mips_elf_calculate_relocation): Handle R_MIPS_GNU_REL16_S2
and R_MIPS_PC16 identically.
gas/
* config/tc-mips.c (append_insn): Handle BFD_RELOC_16_PCREL_S2.
(macro_build): Complain for invalid branch displacements.
(mips_validate_fix): Delete.
(md_apply_fix): Re-add pcrel support for branches.  Use consistent
text for misaligned branch targets.
(tc_gen_reloc: Re-add pcrel support for branches.  Handle strange
BFD pcrel processing.  Remove error for unresolved branches.
* config/tc-mips.h (TC_VALIDATE_FIX, mips_validate_fix): Delete.
gas/testsuite/
* gas/mips/bge.d, gas/mips/bge.s, gas/mips/bgeu.d, gas/mips/bgeu.s,
gas/mips/blt.d, gas/mips/blt.s, gas/mips/bltu.d,
gas/mips/bltu.s: Reactivate external branch tests.
* gas/mips/branch-misc-2.d, gas/mips/branch-misc-2pic.d,
gas/mips/branch-misc-2-64.d, gas/mips/branch-misc-2pic-64.d: New
tests.
* gas/mips/branch-misc-2.l, gas/mips/branch-misc-2pic.l,
gas/testsuite/gas/mips/branch-misc-2pic.s: Remove.
* gas/mips/mips.exp: Adjust branch-misc-2 tests.  Add 64-bit
variants.