Alexey Brodkin [Wed, 1 Jul 2015 06:49:24 +0000 (09:49 +0300)]
ARC: update folders with patches for arc-2015.06-rc1 release
In buildroot we maintain a couple off-the-tree patches.
In particular for binutils and gcc packages.
Because we have many versions of mentioned packages patches for each
particular version reside in a folder which name matches full version
name of the package.
For example we used to have patches for binutils distributed as part of
arc-2014.12 tools in folder ""package/binutils/arc-2014.12". Now with
bump of ARC tools version we need to rename folder with patches to
"arc-2015.06-rc1".
The same applies to gcc.
Should fix http://autobuild.buildroot.net/results/2b2/
2b27a4a64c0b225ae479ecfccf7a97f5ea95598c/
As discussed before it's not possible to reproduce reported problem on recent
Fedora 21/22 distros (at least we know about them) but I may confirm that
patches were applied fine and everything was built well. Hopefully reported
build failure goes away now.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Angelo Compagnucci [Thu, 18 Jun 2015 08:12:28 +0000 (10:12 +0200)]
package/i2c-tools: bump to version 3.1.2
This patch bumps version to 3.1.2 and adds support for the recently
introduced python3 support for py-smbus.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Petr Vorel [Mon, 22 Jun 2015 10:43:50 +0000 (12:43 +0200)]
package/network-manager: add patches to build with kernel headers 3.2
+ lower kernel headers dependency
According to upstream [1], there is no known minimal kernel-version, nor
minimal required feature-set.
Experimentally tested, that 1.0.2 is works with 3.2 kernel headers, even
some features will be missing [2].
[1] https://mail.gnome.org/archives/networkmanager-list/2015-April/msg00039.html
[2] https://mail.gnome.org/archives/networkmanager-list/2015-April/msg00041.html
[Thomas: add comment in Config.in to indicate that it may work with
earlier kernel versions.]
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 12 Apr 2015 14:21:46 +0000 (16:21 +0200)]
package/exim: use libnsl only with glibc
Only (e)glibc provides libnsl, uclibc provides only a stub, and musl
doesn't implement it at all.
Fixes compilation using this defconfig
BR2_arm=y
BR2_cortex_a7=y
BR2_STATIC_LIBS=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_EXIM=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Tue, 30 Jun 2015 20:52:30 +0000 (22:52 +0200)]
systemd: fix license according to README file
Fixes:
http://autobuild.buildroot.org/results/6e3/
6e3dace5892a589225a93c896917833ebc8028f3
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Mon, 29 Jun 2015 22:05:22 +0000 (00:05 +0200)]
olimex_a20_olinuxino_lime: rename board dir to remove _lime suffix
The files in board/olimex/a20_olinuxino_lime/ work with minimal or no
modifications for the Olimex A20-OLinuXino-Micro board, whose support is
going to be added in a later commit.
Rename the directory to clarify it's not restricted to the Lime anymore.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Mon, 29 Jun 2015 22:05:21 +0000 (00:05 +0200)]
a20_olinuxino_micro/readme.txt: add link to linux-sunxi.org
Explicitly state where this information comes from.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Mon, 29 Jun 2015 22:05:20 +0000 (00:05 +0200)]
a20_olinuxino_lime/readme.txt: fix a typo
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Tue, 30 Jun 2015 15:48:17 +0000 (17:48 +0200)]
sunxi-mali: fix linking of malitest
Fixes:
http://autobuild.buildroot.net/results/a15/
a152beb56cdc4591868e14cce9a60e51cbfb0abc/
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Benoît Thébaudeau [Fri, 19 Jun 2015 10:54:33 +0000 (12:54 +0200)]
openssl: support building the binary without MMU
The commit
720893b62510438237b9923d744dd079ddb4f67d "openssl: disable
apps for NOMMU" prevented the openssl binary from being built without
MMU in order to fix a build failure without fork(). However, openssl is
designed to support the lack of fork() with -DHAVE_FORK=0, so allow the
openssl binary to be enabled without MMU thanks to this option.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sun, 14 Jun 2015 15:02:02 +0000 (17:02 +0200)]
package/x11r7/xdiver_xf86-input-tslib: update download url and add hash file
The old url fallback to http://www.pengutronix.de/software/ptxdist/ instead
of http://www.pengutronix.de/software/xf86-input-tslib/download/ breaking
the download.
To avoid such problems in the future, we also add a hash file to this
package.
[Thomas: add hash file.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Matt Weber [Tue, 2 Jun 2015 13:28:35 +0000 (08:28 -0500)]
libsemanage: cleanup python use and license definition
The original package supported python on target, now we just use
it as part of the host tools. The license was also mis-assigned.
[Thomas: add removed option to Config.in.legacy.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexandre Belloni [Tue, 19 May 2015 14:21:47 +0000 (16:21 +0200)]
atmel: add a flashing helper and documentation
Provide a flashing helper to properly select the sam-ba configuration
and reuse the sam-ba tcl script provided by Atmel with minimal
modifications.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexandre Belloni [Tue, 19 May 2015 14:21:48 +0000 (16:21 +0200)]
configs: rename atmel_xplained_defconfig
For consistency, rename atmel_xplained_defconfig to
atmel_sama5d3_xplained_mmc_defconfig as this configuration supports
booting the sama5d3 Xplained with an MMC card (as opposed to the NAND
flash).
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexandre Belloni [Tue, 19 May 2015 14:21:46 +0000 (16:21 +0200)]
configs: add defconfig for Atmel sama5d3 Xplained
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexandre Belloni [Tue, 19 May 2015 14:21:45 +0000 (16:21 +0200)]
configs: add defconfig for Atmel sama5d4 Xplained Ultra
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexandre Belloni [Tue, 19 May 2015 14:21:44 +0000 (16:21 +0200)]
configs: add defconfig for Atmel sama5d4ek
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexandre Belloni [Tue, 19 May 2015 14:21:43 +0000 (16:21 +0200)]
configs: add defconfig for Atmel sama5d3xek
This supports:
- sama5d31ek
- sama5d33ek
- sama5d34ek
- sama5d35ek
- sama5d36ek
with or without the PDA4 or PDA7 screens.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexandre Belloni [Tue, 19 May 2015 14:21:42 +0000 (16:21 +0200)]
configs: add defconfig for Atmel at91sam9x5ek
This supports:
- at91sam9g15ek
- at91sam9g25ek
- at91sam9g35ek
- at91sam9x25ek
- at91sam9x35ek
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexandre Belloni [Tue, 19 May 2015 14:21:41 +0000 (16:21 +0200)]
configs: add defconfig for Atmel at91sam9rlek
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexandre Belloni [Tue, 19 May 2015 14:21:40 +0000 (16:21 +0200)]
configs: update at91sam9g45m10ek defconfig
Use kernel (3.18) and u-boot (2015.01) from Atmel's repositories.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Mon, 29 Jun 2015 22:07:46 +0000 (00:07 +0200)]
boards/raspberrypi: update instructions
Now that we have a sanitised set of defconfig files, and we no longer
support non-DT setups, update and simplify the board readme file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Mon, 29 Jun 2015 22:07:45 +0000 (00:07 +0200)]
config/raspberrypi: rename our non-DT defconfig file
Since we no longer have a non-DT defconfig, and we no longer want to
advertise such a possibility (non-DT is being phased out), just rename
the DT-enabled defconfig file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Mon, 29 Jun 2015 22:07:44 +0000 (00:07 +0200)]
config/raspberrypi: remove non-DT defconfig
The RPi is slowly but surely dropping support for booting without a DTB,
so just ditch our old defconfig now that we have up-to-date DT-enabled
defconfigs for all RPi models (save for the compute module).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Mon, 29 Jun 2015 22:07:43 +0000 (00:07 +0200)]
configs/raspberrypi2: update our defconfig
Update to the latest stable kernel version (4.0.y); build an in-tree DTB.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Mon, 29 Jun 2015 22:07:42 +0000 (00:07 +0200)]
configs/raspberrypi: update the DT-enabled config
Update to the latest stable kernel version; build an in-tree DTB; use
a in-tree defconfig; enable C++ (to match what we have in the non-DT
variant); do not install DTB overlays (this minimalist config does not
make use of them).
Generate the DTBs for both the "original" variant (A and B) and the
"Plus" variant (A+ and B+).
Drop our custom linux defconfig file now we use an in-tree one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 30 Jun 2015 11:07:24 +0000 (08:07 -0300)]
linux: bump default to version 4.1.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 30 Jun 2015 11:07:23 +0000 (08:07 -0300)]
linux-headers: bump 3.{10, 14, 18}.x and 4.{0, 1}.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bartosz Golaszewski [Tue, 30 Jun 2015 10:55:20 +0000 (12:55 +0200)]
monkey: fix building with debugging symbols
Fix a typo in the monkey package - should be MONKEY_CONF_OPTS
instead of MONKEY_CONF_OPT.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bartosz Golaszewski [Tue, 30 Jun 2015 10:41:14 +0000 (12:41 +0200)]
pulseview: bump commit hash
Include commit
ec6cc07f which fixes an issue causing build failures
on several architectures.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bartosz Golaszewski [Tue, 30 Jun 2015 10:41:13 +0000 (12:41 +0200)]
libsigrok: bump commit hash
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Wed, 27 May 2015 19:39:39 +0000 (21:39 +0200)]
gdbm: handle optional dependency gettext
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 30 Jun 2015 10:36:34 +0000 (12:36 +0200)]
binutils: update to the latest ARC version by default
Following commit
36555b4c8dce27822ecbbed58798f887ad452b18 ("ARC:
switch to RC1 of upcoming arc-2015.06 tools"), the binutils package
only contains the hash information for the 2015.06-rc1 ARC version of
binutils (which is in fact no hash). However, when an external
toolchain is used, and binutils is built for the target, it's still
the old 2014.11 binutils version that gets used in binutils.mk,
causing a build failure because there is no hash available for this
version.
This commit fixes that by using 2015.06-rc1 as the default binutils
version on ARC, which is used when no host-binutils has been built.
Fixes:
http://autobuild.buildroot.org/results/8f7/
8f772e6fccb4f918120a7bb814da2224432d1c09/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Waldemar Brodkorb [Tue, 30 Jun 2015 04:33:36 +0000 (06:33 +0200)]
uclibc-ng: fix parallel build issue for arm/xtensa when LOCALE support is enabled
This patch should fix any parallel build issues found
by autobuilder lately, f.e.:
http://autobuild.buildroot.net/results/
43dd5c5da0d003b654fd252c989d49c2e5872827/
http://autobuild.buildroot.net/results/
cfb438f933ff7385d612d65798b0b8ed833a6476/
and many more.
Will be committed upstream, if autobuilders are working.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 30 Jun 2015 10:25:50 +0000 (12:25 +0200)]
pure-ftpd: fix hash and use .bz2 tarball
For some reason, the hash file added in commit
ee6c9f5a1bc1995d968214345c011a44a3c145c8 by Gustavo turns out to be
wrong, so this commit replaces it with the proper hash, also added
after checking the GPG signature.
While at it, we switch to using a .bz2 tarball.
Fixes:
http://autobuild.buildroot.org/results/c44/
c441f35119191f47dd5fae96fd76827024e50329/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Morgan Delestre [Mon, 29 Jun 2015 09:02:43 +0000 (09:02 +0000)]
monkey: new package
Monkey is a small, fast and lightweight open source Web Server for
GNU/Linux. It has been designed with focus in embedded devices,
therefore its scalable by nature having a low memory and CPU
consumption and an excellent performance.
[Thomas:
- Add missing dependency on !BR2_STATIC_LIBS (the source code uses
dlopen) and BR2_USE_MMU (the source code uses fork)
- Slightly adjust/reword the description of the
BR2_PACKAGE_MONKEY_SHARED option.
- Remove all the complicated installation logic for the target, and
just use "make install" instead.
- Pass --no-backtrace when uClibc is used, otherwise the build fails
because <execinfo.h> is not available in uClibc.
- Pass $(TARGET_CONFIGURE_OPTS) in the environment of the configure
script., otherwise monkey gets built for the host and not for the
target.
- Add a post install target hook to remove a broken symlink
libmonkey.so installed by Monkey's Makefile when the shared
library is not enabled.
- Use TARGET_MAKE_ENV when calling make, just because we should.
- Pass --malloc-libc so that the libc malloc() is used instead of
the builtin jemalloc allocator, which requires more work to
cross-compile properly.
- Add missing empty line after the .mk header and before the first
variable definition.]
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 28 Jun 2015 22:25:14 +0000 (00:25 +0200)]
package/rpi-userland: bump version
Misc fixes and improvements all over the place...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 28 Jun 2015 22:25:13 +0000 (00:25 +0200)]
package/rpi-firmware: bump version
Misc enhancements and fixes all over the place, most notably:
- FW: fix overclocking, better prioritise sound, fix CMA L1 cache,
improved DTB/DTB-overlay support, SDcard freq fixes,
voltages...
- video: fix decoding weird stuff, fix stereo output...
- camera: raw image capture, HDR (really?)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 28 Jun 2015 22:25:11 +0000 (00:25 +0200)]
package/rpi-firmware: add option to install DTB overlays
Currently, Buildroot does not support building the overlays that are
bundled in the Linux kernel, so all we can do is install the ones
pre-built in rpi-firmware.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Floris Bos [Sun, 28 Jun 2015 22:25:10 +0000 (00:25 +0200)]
rpi-firmware: allow disabling installation of binary DTBs
The binary .dtb files are not suitable for everyone as they are
kernel-version specific.
Reintroduce BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS option.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
[yann.morin.1998@free.fr: don't install DTBs if kernel builds
its own; fix default; rephrase help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 29 Jun 2015 13:14:43 +0000 (15:14 +0200)]
systemd: bump to version 221
- Bump to version 221
- Update hash file
- Add --disable-gnuefi to configure options to avoid a failure like this
one:
checking for /usr/lib/gnuefi/elf_ia32_efi.lds... configure: error:
cannot check for file existence when cross compiling
- Remove gudev logic since it has been removed from the systemd tree and
it is now an external project.
Announcement URL:
http://lists.freedesktop.org/archives/systemd-devel/2015-June/033170.html
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Mon, 29 Jun 2015 14:13:34 +0000 (11:13 -0300)]
qemu: enable for aarch64
Enable the target qemu for aarch64 since it works just fine.
Only tested using userland CPU emulation (no HYP) with a
qemu_aarch64_virt_defconfig image inside a qemu_aarch64_virt_defconfig
instance.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Mon, 29 Jun 2015 07:03:17 +0000 (09:03 +0200)]
perl-cross: bump to version 0.9.7
fix some build failures,
see https://github.com/arsv/perl-cross/issues/17
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jerzy Grzegorek [Mon, 29 Jun 2015 06:01:09 +0000 (08:01 +0200)]
live555: bump to version 2015.06.25
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Mon, 29 Jun 2015 12:45:54 +0000 (09:45 -0300)]
iproute2: tipc support needs 3.18+ headers
Fixes:
http://autobuild.buildroot.net/results/173/
173c9dbed6422a3cc4f9d1f998bc25ce2e9538c7/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 29 Jun 2015 15:43:13 +0000 (17:43 +0200)]
tor: needs thread support
Fixes:
http://autobuild.buildroot.org/results/4f7/
4f758978f6820ecceaad57385f3c104011180c4d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Danomi Manchego [Thu, 25 Jun 2015 03:23:48 +0000 (23:23 -0400)]
libpng: rebase ignore-symbol-prefix patch to apply cleanly
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Danomi Manchego [Thu, 25 Jun 2015 04:14:20 +0000 (00:14 -0400)]
nginx: bump to 1.8.0 (latest stable version)
Patches refreshed to apply with no shift or fuzz.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Danomi Manchego [Thu, 25 Jun 2015 03:32:49 +0000 (23:32 -0400)]
nginx: fix nginx.old clean-up
The bin path for nginx is configured for /usr/sbin, so deleting
the nginx.old back-up from /usr/bin never works. Fix path, and
also use "$(RM)" instead of "-$(RM)", as "rm -f" never fails.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Thu, 18 Jun 2015 20:19:41 +0000 (22:19 +0200)]
package/vlc: Add libsidplay2 as optional dependency
vlc has a sid plugin:
$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a
output/target/usr/lib/vlc/plugins/demux/libsid_plugin.so |
grep NEEDED | grep sid
0x00000001 (NEEDED) Shared library: [libsidplay2.so.1]
0x00000001 (NEEDED) Shared library: [libresid-builder.so.0]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Matt Weber [Tue, 2 Jun 2015 13:28:26 +0000 (08:28 -0500)]
busybox: added linux-pam support
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Rahul Bedarkar [Thu, 25 Jun 2015 13:43:24 +0000 (19:13 +0530)]
glog: disable on blackfin external toolchains
With following blackfin toolchains
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
when BR2_BINFMT_FDPIC=y
../usr/include/bits/elf-fdpic.h: In function 'void* __reloc_pointer(void*, const elf32_fdpic_loadmap*)':
../usr/include/bits/elf-fdpic.h:95: error: invalid use of 'void'
code snippet at line 95 in elf-fdpic.h
-------------------------------------------------------
unsigned long offset = p - (void*)map->segs[c].p_vaddr;
-------------------------------------------------------
void pointer addition and subtraction is not allowed in C++ as it has undetermined size,
however in C with language extension it is possible because sizeof void is treated
as one byte.
This is toolchain-specific issue. So disable package on these external toolchains.
fixes:
http://autobuild.buildroot.net/results/c70/
c704c70ae2f066f85dd6a5fa6a73789bc358d368/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rahul Bedarkar [Thu, 25 Jun 2015 13:43:23 +0000 (19:13 +0530)]
glog: add dependency on dynamic library
when BR2_STATIC_LIBS=y
src/symbolize.cc:110:19: error: dlfcn.h: No such file or directory
glog requires dlfcn.h header. So add dependency on dynamic library
fixes:
http://autobuild.buildroot.net/results/75d/
75d17ceb764c2c1136047c089a0c554770ca98a4/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Fri, 26 Jun 2015 10:06:57 +0000 (12:06 +0200)]
configs/olimex_a20_olinuxino_lime_mali_defconfig: new board
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 3.4.x vendor specific kernel, which allows to use
the Mali 3D acceleration for OpenGL support.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Fri, 26 Jun 2015 10:06:56 +0000 (12:06 +0200)]
configs/olimex_a20_olinuxino_lime: new board
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 4.x mainline kernel.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Ripard [Thu, 25 Jun 2015 14:04:55 +0000 (16:04 +0200)]
libaio: introduce a BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS option
In order to allow other packages to easily select libaio without
duplicating its complicated architecture dependencies, this commit
introduces a BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS blind option.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Fri, 26 Jun 2015 08:13:37 +0000 (10:13 +0200)]
sunxi-mali: bump version
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Fri, 26 Jun 2015 08:13:36 +0000 (10:13 +0200)]
libump: new package
previously, this library was a part of sunxi-mali
[Thomas: add missing comment about the glibc dependency.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Martin Bark [Sat, 27 Jun 2015 02:01:34 +0000 (03:01 +0100)]
package/nodejs: Update to allow selecting node.js version
[Thomas: fix minor Config.in formatting issues pointed by Yann.]
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sun, 28 Jun 2015 13:11:12 +0000 (15:11 +0200)]
uclibc: use the ARC-specific uClibc by default on ARC
Following the switch to uClibc-ng as the default library, uClibc-ng
was also used as the default on ARC, while we actually want to use the
ARC specific version by default on this architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexey Brodkin [Fri, 26 Jun 2015 19:27:20 +0000 (22:27 +0300)]
ARC: switch to RC1 of upcoming arc-2015.06 tools
Even though this is only RC1 it's been heavily used internally so it should
not be any worse than existing arc-2014.12.
Moreover this relase (and so its RC1) finally delivers support of NPTL
for ARC in uClibc.
That's why it would be good to allow interested users to start trying it
(for example WebKit and apps that use WebKit could be successfully built
and run) also it will be helpful to run that new toolchain through
autobuilder in attempt to find any hidden regressions so we have a solid
toolchain for release.
If there's an interest in that patch more patches will follow with
subsequent RCs and essentially on appearence or relese Buildroot will be
updated with it.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Guido Martínez [Fri, 26 Jun 2015 17:33:20 +0000 (14:33 -0300)]
toolchain: allow for stupid toolchains
check_arm_abi builds a test C file to check that the toolchain is
working correctly, with the output redirected to /dev/null.
However, some toolchains (OSELAS 2014.12.0, for instance) foolishly
append ".gdb" to the output filename for an intermediate file, causing
an attempt to write to /dev/null.gdb, which obviously fails.
Fix this by adding changing the output to a temporary file, which is
later removed along with any other "suffixed" files.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Guido Martínez [Fri, 26 Jun 2015 17:33:19 +0000 (14:33 -0300)]
arm: update processor types
Add the Cortex M3 variant. These microcontrollers don't support regular
ARM instructions and don't have an MMU.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 13 Jun 2015 16:46:37 +0000 (18:46 +0200)]
core/pkg-kconfig: allow saving config to a non-existing custom config file
A very interesting use-case for a kconfig-based package is to create a
custom (def)config file based on one bundled with the package itself,
like described in PR-8156:
make menuconfig
-> enable kernel, use an in-tree defconfig, save and exit
make linux-menuconfig
-> enable/disable whatever option, save and exit
make menuconfig
-> change to use a custom defconfig file, set a path, save and exit
make linux-update-config
-> should save to the new custom defconfig file
However, that is currently not possible, because the dependency chain
when saving the configuration goes back up to the (newly-set!) custom
(def)config file, which does not exist.
So, we break the dependency chain so that saving the configuration does
not depend on that file. Instead, we use a terminal rule that checks
that the configuration has indeed been done, and fails if not.
Closes #8156.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 13 Jun 2015 16:46:36 +0000 (18:46 +0200)]
core/pkg-kconfig: run the kconfig fixups after exiting configurators
After we exit the configurators, we need to re-run the kconfig fixups to
ensure the user is not able to override them in the configurators.
Currently, we schedule that "for later", by removing the corresponding
stamp file, so make will run the fixups "later".
This means the user has access to the un-fixed .config file, which he
might decide to copy and use as a reference (not too bad, since we'd run
the fixups anyway; but not clean either).
Note that we still remove the stamp file before running the fixups, in
case any one of those fixups breaks, so we don't want to believe the
fixups have been applied; the fixup macro will touch that file anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 13 Jun 2015 16:46:35 +0000 (18:46 +0200)]
core/pkg-kconfig: move the kconfig fixups to a macro
The same fixups will have to be done after leaving the configurators,
so we want to commonalise that code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 13 Jun 2015 16:46:34 +0000 (18:46 +0200)]
core/pkg-kconfig: ensure kconfig base and fragment files exist
Even though we do have a dependency chain back to each of the kconfig
base and fragment files:
$$($(2)_DIR)/.config: $$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES)
we can't rely on it to ensure they are all present, because they all have
this rule:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
but since this rule has no prerequisite (only build-order, but that does
not count in this case) and no recipe, make will believe each missing
file to be a PHONY target, and will always run targets that depend on
it:
https://www.gnu.org/software/make/manual/make.html#Force-Targets
So, that means a missing kconfig base or fragment file would always
cause the rule to generate .config to be run at each invocation, which
in turn would cause a rebuild of the kernel, which is clearly not what
we want.
Since this is expected make behaviour, we can well end up with a missing
Kconfig base or fragment. To avoid continuously rebuilding the kernel in
that case, we must check those files exist by ourselves, and error out
if any one of them is missing.
One would expect we check for them right in their dependency rule, like
so:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
[ -f $(@) ] || {echo Missing $(@) >&2; exit 1; }
but that does not work, as only the first target is tested for. That
check msut be turned into a loop explicitly testing all files, like so:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
for f in $$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES); do \
[ -f $(@) ] || {echo Missing $$$${f} >&2; exit 1; }; \
done
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 13 Jun 2015 16:46:33 +0000 (18:46 +0200)]
core/pkg-kconfig: extract package before using kconfig fragments
Kconfig fragments may be present in the package, so we need to extract
and patch it before we can use the fragments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Martin Bark [Sat, 27 Jun 2015 02:01:33 +0000 (03:01 +0100)]
package/nodejs: Bump version to 0.10.39
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 27 Jun 2015 11:15:32 +0000 (08:15 -0300)]
iproute2: bump to version 4.1.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 27 Jun 2015 11:23:02 +0000 (08:23 -0300)]
pure-ftpd: bump to version 1.0.41
Also add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 27 Jun 2015 11:33:31 +0000 (08:33 -0300)]
gcc: bump 4.9.x series to version 4.9.3
Drop 110-pr64896.patch and 920-libgcc-remove-unistd-header.patch since
they're upstream.
Tweak 850-libstdcxx-uclibc-c99.patch for this new release.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sun, 28 Jun 2015 11:00:28 +0000 (13:00 +0200)]
package/vlc: install vlc libraries in staging
Although no package seems to link against vlc libraries right now, these
libraries will be necessary for upcoming new efl emotion-generic-players
package.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nimai Mahajan [Fri, 26 Jun 2015 15:01:58 +0000 (11:01 -0400)]
libarchive: add hash and enable lzma support
Add libarchive hash. Enable lzma support.
Both xz and lzma support are provided by the xz library.
[Thomas: explicitly pass --with-lzma when xz is available.]
Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:52 +0000 (21:59 +0200)]
package/opencv: add openmp support
Note that this situation is not ideal because it only add openmp support
to the Buildroot toolchain, not the external ones; but a couple of
packages already are in this situation.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:49 +0000 (21:59 +0200)]
package/opencv: add python support
opencv_python module needs python-numpy because it uses some numpy
headers in this wrapper.
>From its 2.4 release, OpenCV offers python bindings, but they required
most of the OpenCV modules to be enabled.
Since OpenCV-3.0.0, python bindings have been reworked:
- it now supports both python2 and python3
- only built modules supporting wrapped in python will be included in
the bindings.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:48 +0000 (21:59 +0200)]
package/opencv: disable all modules by default
This change allows to reduce the size of the default OpenCV package, so
the final root filesystem.
However, this will break any existing defconfig enabling OpenCV. Indeed,
a minimal OpenCV package will be built, whereas, prior to applying this
patches, a full-featured one would have been built instead.
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:47 +0000 (21:59 +0200)]
package/opencv: reduce modules on by default
Since its integration into Buildroot, OpenCV always enables all modules
by default because the inter-module denpedency were not supported.
Now that OpenCV inter-module dependencies are correctly set at the
Buildroot configuration level, it is possible to reduce the enabled
module list to its minimal set, letting kconfig enable the other
modules.
This change will not change anything WRT a defconfig build with opencv.
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:46 +0000 (21:59 +0200)]
package/opencv: reword modules' prompt and help text
This patch is mostly cosmetic changes improving the human interface.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:45 +0000 (21:59 +0200)]
package/opencv: define modules inter-dependencies
OpenCV allows to enable/disable the selection of modules (a.k.a.
opencv libraries). These modules depend one on the others; these
dependencies are already handled by the build-system (CMake).
However, the way we handled them in Buildroot was not really clean.
For each opencv module, there is a kconfig option, but we forced the
corresponding CMake config option without checking for the modules'
dependencies.
This patch replicates the modules' dependency relations in the
Config.in, so that the selection of the user will actually be built.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:44 +0000 (21:59 +0200)]
package/gstreamer1/gst1-plugins-bad: disable opencv plugin with opencv-3
The opencv plugin uses stuff from the now removed opencv's legacy module.
Note that the configure script already correctly check the opencv version
and disable the opencv plugin with opencv-3.x.
Also remove 'select ...' to prevent kconfig from complaining about
recursive dependencies.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:43 +0000 (21:59 +0200)]
package/opencv: bump to version 3.0
This major version bump is in fact a bump from 2.4.10 to 2.4.11, then to
3.0.
OpenCV-2.4.11 improves a lot the Buildroot integration, including a
couple of patches that are no longer needed:
- x86 PIC code compilation fix in core module [1];
- return type fix in superes module [2];
- opencv.pc generation [3].
It also improves the gstreamer-0.10/1.x detection [4], that will be
needed in a follow-up patch.
OpenCV-3.0 still requires 2 patches (backported from upstream fixing
pthread support [5,6].
The OpenCV-3.0 does some major changes, for which a transition guide
has been published [7].
Among these changes coming with OpenCV-3.0, some new modules have been
introduced and others got removed; leading to a bunch of configure
option updates (to keep as much as possible an iso-functional-perimeter)
and the legacy menu has been updated too.
The worth noticing removals being:
- the opencv_legacy and opencv_nonfree modules no longer exist;
- the opencv_contrib module has moved out of the opencv base tree and
now has its own repository [8].
There is currently no plan to support it.
Some 3rd-party supports have been improved or added; their integrations
in Buildroot will be addressed in follow-up patches.
[1] https://github.com/Itseez/opencv/commit/
ea50be0529c248961e1b66293f8a9e4b807294a6
[2] https://github.com/Itseez/opencv/commit/
2e393ab83362743ba1825ad4b31d4a2925c606b4
[3] https://github.com/Itseez/opencv/commit/
eceada586bbf18fc267e437522ec4f1f23ddc656
[4] https://github.com/Itseez/opencv/commit/
38bb0db9dbec08666c8a64b3e4ead8fadf15c980
[5] https://github.com/Itseez/opencv/commit/
1f983ec39c97298b0c8ce409a1cc229ecf14e55c
[6] https://github.com/Itseez/opencv/commit/
a482dcce464acbd5368fb93c6c3d52ba8401776a
[7] http://docs.opencv.org/master/db/dfa/tutorial_transition_guide.html
[8] https://github.com/itseez/opencv_contrib
[Thomas:
- address most contents made by Yann E. Morin on the Config.in file.]
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:42 +0000 (21:59 +0200)]
package/opencv: alphabetically sorted each _CONF_OPTS group
No new option added nor removed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nimai Mahajan [Fri, 26 Jun 2015 14:19:43 +0000 (10:19 -0400)]
libucl: new package
Libucl is a high performance and flexible JSON/YAML/etc. parser for C.
https://github.com/vstakhov/libucl
[Thomas:
- remove hash file, should not be used for github downloads
- rewrap Config.in help text
- remove trailing white space in Config.in.
- add missing host-pkgconf dependency, without which the package
doesn't autoreconf properly.
- fix license: it is BSD-2c, not just BSD.]
Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Fri, 26 Jun 2015 08:14:12 +0000 (10:14 +0200)]
orc: bump version
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 17:09:42 +0000 (14:09 -0300)]
heimdal: bump to version 1.6rc2
Helps drop some patches and hence autoreconf saving time.
Also allows parallel builds.
And fixes:
http://buildroot-busybox.
2317881.n4.nabble.com/PATCH-v2-heimdal-explicitly-set-lpthread-td99422.html
without the need to hardcode libraries (disables/withouts weren't enough
though i've added them anyway for correctness).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 17:57:42 +0000 (14:57 -0300)]
ipset: bump to version 6.25.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 18:52:08 +0000 (15:52 -0300)]
dosfstools: bump to version 3.0.28
Change to new homepage since maintainer changed as well.
Add hash file based on tarball signature file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 18:52:37 +0000 (15:52 -0300)]
openswan: bump to version 2.6.43
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 22:35:07 +0000 (19:35 -0300)]
mpd-mpc: bump to version 0.27
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 22:35:06 +0000 (19:35 -0300)]
mpd: bump to version 0.19.10
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 21:53:02 +0000 (18:53 -0300)]
collectd: bump to version 5.5.0
Lots of new plugins!
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yegor Yefremov [Thu, 25 Jun 2015 19:52:14 +0000 (21:52 +0200)]
libconfig: bump to 1.5
Add hash file.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 21:13:46 +0000 (18:13 -0300)]
rrdtool: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 25 Jun 2015 13:28:06 +0000 (15:28 +0200)]
system/device_table.txt: drop unused ifupdown post-up.d / pre-down.d directories
These are not used by the busybox or Debian ifupdown implementation. Instead
if-up.d is run after the per-interface up tasks (E.G. post-up) and
if-down.d is run before the per-interface down tasks (E.G. pre-down).
So drop them as they only cause confusion.
grep execute_all output/build/busybox-1.23.2/networking/ifupdown.c
static int execute_all(struct interface_defn_t *ifd, const char *opt)
if (!execute_all(iface, "pre-up")) return 0;
if (!execute_all(iface, "up")) return 0;
if (!execute_all(iface, "down")) return 0;
if (!execute_all(iface, "post-down")) return 0;
grep execute_script output/build/ifupdown-0.7.49/execute.c
int execute_scripts(interface_defn * ifd, execfn * exec, char *opt)
if (!execute_scripts(iface, doit, "pre-up"))
if (!execute_scripts(iface, doit, "up"))
if (!execute_scripts(iface, doit, "down"))
if (!execute_scripts(iface, doit, "post-down"))
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
David du Colombier [Thu, 11 Jun 2015 09:01:44 +0000 (11:01 +0200)]
x264: bump to version
20150223-2245-stable
Use the Git repository instead of the snapshots,
since they are not generated anymore.
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 24 Jun 2015 18:39:19 +0000 (15:39 -0300)]
ulogd: bump to version 2.0.5
Remove kernel headers check since it now implements local definitions to
keep working with newer versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Cédric Marie [Tue, 23 Jun 2015 21:36:06 +0000 (23:36 +0200)]
Makefile: Don't export VERBOSE unless V=1 (for CMake)
CMake verbose mode is based on VERBOSE environment variable.
* If VERBOSE is exported but empty, only "Dependee ... is newer than
depender ..." messages are shown.
* If VERBOSE is exported and set (whatever the value), all compilation
commands are shown.
VERBOSE is currently systematically exported by Buildroot, even if it
is empty, in the root Makefile, which implies that the "light" verbose
mode - with "Dependee ... is newer than depender ..." messages - is
always enabled.
VERBOSE should only be exported when V=1, which is the standard way to
enable verbose mode in Buildroot.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 24 Jun 2015 07:20:43 +0000 (09:20 +0200)]
gcc: bump 4.8.x version
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 23 Jun 2015 17:21:20 +0000 (20:21 +0300)]
gpsd: fix build with musl
Add a patch adding missing include.
Fixes:
http://autobuild.buildroot.net/results/493/
493ddaf63f41918d718b5c26e2db258c67dba0a6/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
projects / buildroot.git / log