git.libre-soc.org Git - buildroot.git/log

conntrack-tools: adjust comment to match conditional

Commit 3afbc4f3 (conntrack-tools: uses dlopen(), not available on static
builds) adjusted the dependencies for the comment, but forgot to update the
comment itself.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc/gcc-final: pass TARGET_ABI flags to configure with --enable-cxx-flags

libstdc++ is in all regards a normal library, it needs to be built with
TARGET_ABI flags, otherwise linking it with other C++ code may fail.

Pass TARGET_ABI flags to gcc-final configure script in the
--enable-cxx-flags parameter.

Fixes:
http://autobuild.buildroot.net/results/81a3bca5cbcf789c7ce1aa221a6a4154dd7c3917/
http://autobuild.buildroot.net/results/4943b214c29951ecc7af0a1f360b6454485c0b9b/

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ncurses: Fix GCC 5.x preprocessor failure

Building ncurses 5.9 with GCC 5.x fails with a syntax error, caused by
earlier preprocessing. This failure is more likely when building for
host (e.g. host-ncurses) that recently updated to GCC 5.x.

This patch is taken from the following link (more information is also
available here):
https://groups.google.com/forum/#!topic/sage-trac/U31shviuqzk

Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Acked-by: Jaap Crezee <jaap@jcz.nl>
Tested-by: Jaap Crezee <jaap@jcz.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python3: add patch to fix logic to get gcc paths

The Python setup.py has a function called add_gcc_paths(), which
executes gcc -E -v to get the list of header paths searched by
gcc. However, the logic of setup.py is only valid with the normal
english output of gcc: it doesn't work if a non-english locale is
set. This causes setup.py to not find certain headers (such as zlib.h)
and therefore disabling the build of such extensions.

Reported-by: Bruno Coudoin <bruno.coudoin@gcompris.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python: add patch to fix logic to get gcc paths

The Python setup.py has a function called add_gcc_paths(), which
executes gcc -E -v to get the list of header paths searched by
gcc. However, the logic of setup.py is only valid with the normal
english output of gcc: it doesn't work if a non-english locale is
set. This causes setup.py to not find certain headers (such as zlib.h)
and therefore disabling the build of such extensions.

Reported-by: Bruno Coudoin <bruno.coudoin@gcompris.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

upmpdcli: fix static linking issue

Fixes:
http://autobuild.buildroot.net/results/7ed/7ed85071bc06b4806e90b278a0736ea70c01b456/

Upmpdcli forgets to take the dependencies of libupnpp into consideration,
breaking static linking, so help it.

Libupnpp unfortunately doesn't provide a .pc file, so manually handle its
dependencies here.

The build system doesn't expand LIBS from the configure step, so manually
pass it to make.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

conntrack-tools: uses dlopen(), not available on static builds

Fixes:
http://autobuild.buildroot.net/results/fff/fff4865c9bb8ca42d3cece903d0fc3daea504f67/
http://autobuild.buildroot.net/results/742/74222a44ad168148c18af479878d8f848d3d6a73/
http://autobuild.buildroot.net/results/470/470197fad2402be9222b8abf96dd45c341a850e9/
http://autobuild.buildroot.net/results/ab1/ab1ae40f1862300cd7667b7bd03cc59d7455a769/

And many more.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: Fix static linking by reworking static libs handling

Fixes
http://autobuild.buildroot.net/results/157/157749f8b44bc02fbed0232a2b33137aba495134/
http://autobuild.buildroot.net/results/df4/df4e2ea098b0126867455af1891837c6d7d99a92/
http://autobuild.buildroot.net/results/e69/e6993d66aeebbe994063a60871412b2235ce5455/

[Peter: unixodbc only needs -lpthread if toolchain has threads support]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nmap: Fix static linking

Fixes
http://autobuild.buildroot.net/results/040/040129539257d88d9437d113752bc8634fd9b2b2/
http://autobuild.buildroot.net/results/73a/73a562a3a1f356c1a39b2fb57f0848c4b99fe8b1/
http://autobuild.buildroot.net/results/767/767b8eafe7a204327eaa182c065ca5cfff18096f/
http://autobuild.buildroot.net/results/0f7/0f7f3a56815dc6422a466fe9b4357ace98f78e11/

[Peter: add host-pkgconf to _DEPENDENCIES]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

keyutils: uses dl*, disable for static build

And drop the unused static handling from the .mk file.

Fixes:
http://autobuild.buildroot.net/results/8a2/8a2ff0af4faeda4d2d224dcaf543a574d7eba30c/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/download: relocate the git clone comment

Following commit 95a572282e87 (pkg-infra: move the git download helper to a
script, 2014-07-02), move the comment describing the shallow clone trickery as
well. Merge this comment with the existing helper comment that was added in
7e40a1103a91 (support/download: convert git to use the wrapper, 2014-08-03).

Rename $($(PKG)_DL_VERSION) to ${cset} to match the helper code context.

Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sconeserver: fix static link with openssl

When linking statically, the order of libraries on the linker command
line is important, and sconeserver got it wrong.

Also, sconeserver does not use pkg-config, so it misses the private
libs of -lcrypto, which is linking with -lz.

Fix that:
  - add a patch to configure.in to fix the order of libraries;
  - forcibly pass -lz when linking statically with openssl.

Note: we were already reconfiguring sconeserver, because it comes from
the github repository.

Fixes:
    http://autobuild.buildroot.org/results/403/403eac974ecdaacdb66b8241fbdcf19ec5e07480

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/php: Disable jit in bundled pcre library

Quote from ext/pcre/pcrelib/doc/pcre.txt
"This support is available only for certain hardware architectures. If
this option is set for an unsupported architecture, a compile time
error occurs."

Disable jit support on unsupported archs by updating ext/pcre/pcrelib/config.h

Fixes
http://autobuild.buildroot.net/results/966/966d6c47d1ed13a90c2846d96fb3d193df4b2aaa/ (bfin)
http://autobuild.buildroot.net/results/3f5/3f53751b192078714860e64d3f6d8d7398433d5a/ (xtensa)
http://autobuild.buildroot.net/results/de1/de12474d2b5cce251b1ab10f7d7e28c90545a1f0/ (arcle)
http://autobuild.buildroot.net/results/358/358b54245bb48f653ce209be070bd5fe6b17afc4/ (microblazeel)
http://autobuild.buildroot.net/results/a7c/a7c161ca0b424ae35634c9f2d8a8111cedec8181/ (nios2)
http://autobuild.buildroot.net/results/dad/dad1128f58fc601bf96da5fa0635b9b9c6c8f0b8/ (sh)

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgcrypt: allow optimization

Drop the --disable-optimization option, which makes the libgcrypt configure
remove buildroot's optimization setting passed in from CFLAGS.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lttng-libust: requires dynamic library support

Fixes:
http://autobuild.buildroot.net/results/e89/e8974516173ea74c830b71e400fcbafdd69dea60/
http://autobuild.buildroot.net/results/cac/cac7015c3be7e34dbeaa6accb59aebebe68eb6d2/
http://autobuild.buildroot.net/results/4ce/4ce0a35316cd25536b58b50f096b6f75f6e3c1c9/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gptfdisk: propagate ncurses reverse dependency

gptfdisk cgdisk select nucurses wchar support which is disabled
on bfin with FLAT binary format.

Add the ncurses's reverse dependency to gptfdisk.

Fixes:
http://autobuild.buildroot.net/results/ce3/ce35c072f0b7c3a7a1918cb865a2eecbba8a1b23/

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nbd: security bump to version 3.11

Fixes:
CVE-2015-0847 nbd-server denial of service due to unsafe signal handlers

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libstrophe: install into target

Since a7134ce6745 (libstrophe: bump version), the package does in fact build
and install a shared library, so ensure it also ends up in target so it can
be found at runtime.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

janus-gateway: disable for static build

janus-gateway requires dlopen().

Fixes:
http://autobuild.buildroot.net/results/092/092aac2b8abe0edd868a7e0cc59cdaaf28ca4ad5/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fio: disable for static build

Fixes:
http://autobuild.buildroot.net/results/275/275dc359d72513fd567b7ccbbd4061dffd8a5266/
http://autobuild.buildroot.net/results/5e8/5e8cc28da6a17dcb142eb6d8a8cada735b211e2e/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{12,18}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

postgresql: security bump to version 9.4.2

Fixes:
CVE-2015-3165 (denial of service)
CVE-2015-3166 (information disclosure)
CVE-2015-3167 (side-channel key exposure)

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual/br2-external: use proper .Note sections

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual/br2-external: remove superfluous leading space in code blocks

They are not needed, and other code blocks in the same file are not
indented either.

Remove those leading spaces, so all our code blocks look the same.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iproute2: drop unneeded Werror handling

Upstream has dropped -Werror since the 3.12 release, so there's no point in
us sed'ing it away:

https://git.kernel.org/cgit/linux/kernel/git/shemminger/iproute2.git/commit/?id=3140e9a3a343d37a8d828ee27e16ad9f3f9ab389

Reported-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

packages/flite: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libjpeg: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/directfb: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/knock: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/udpcast: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/efl/libelementary: disable on static lib only build

libelementary sources include dlfcn.h header when HAVE_FORK symbol is defined;
this is always the case because efl already depends on BR2_USE_MMU.

Fixes:
http://autobuild.buildroot.org/results/07c/07c97918dab24215f5c5130a9cd2788adca0a27d/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: fix build without threads and pcre

The pcre library bundled in php is not configurable through the usual
--enable/disable options, but wants to be thread-safe by default, so it
wants to use pthreads (uncludes pthread.h and uses pthread_* functions).

So, just override the default configuration to explicitly require the
bundled pcre library be single-threaded when we have no thread and are
not using the external pcre library.

Fixes:
http://autobuild.buildroot.org/results/f50/f50f4e569466ad74e49a3eac9ea2e6cfc4dd30e3/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gptfdisk: ensure correct libintl/libiconv build order

Fixes:
http://autobuild.buildroot.net/results/c7d/c7d48554d76e39cbdf715721ae51e3516a99f97e/

We're explicitly linking against libintl/libiconv if enabled when linking
statically, but weren't ensuring that those libraries had already been built
before gptfdisk leading to linker issues.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ipmiutil: really disable lanplus

Fixes:
http://autobuild.buildroot.org/results/04a/04a1c48d484debd7894fd32997ed50d3a0110b93/

Due to weird constructs in the Makefiles, lanplus is always built, even
when explicitly disabled with --disable-lanplus .

So, add a patch to enforce disabling lanplus. We're doing an at-minima
patch just for the upcoming Buildroot release, and to avoid diverging
too far from upstream...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ipmiutil: disable parallel build

ipmiutil has a race when generating the object files and the executable,
because it uses very odd (to say the least) constructs in its
Makefile.am, leading to improper dependency-tracking.

Since impmiutil is pretty small, and because it is just mindbloggingly
complex to fix its Makefile.am, just disable parallel build.

Fixes:
    http://autobuild.buildroot.org/results/661/661373306d0440aaea67e394fbbfc47fd4481589/
    http://autobuild.buildroot.org/results/a6c/a6c5f9d8e0e0bad27b8ca1fa217bfda4216f2cd8/
    http://autobuild.buildroot.org/results/f0b/f0bbbd54349b5239872d6de185e16c1d90b3f779/
    http://autobuild.buildroot.org/results/20c/20c09695481c3d1030852330c1d1f1f9489f1f41/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libgsasl: fix typo in variable name

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gptfdisk: fix static linking issue with iconv

Fixes:
http://autobuild.buildroot.net/results/e89/e891a5bab72690a530781ad87d5804a53a209b5c/

Similar to libintl, some of the gptfdisk dependencies may link against
libiconv, so we need to do so as well when linking statically.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2015.05-rc3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs/jffs2: Fix mkfs.jffs2 --pagesize parameter usage

Fixes #8186

Mkfs.jffs2 accepts a --pagesize parameter, which allows specifying the size
of the virtual memory page size of the target machine, where the image will
be used.  (This is the value of the PAGE_SIZE macro in Linux.) In most cases
the parameter doesn't need to be set as the default value of 4 kB is usually
correct.

The parameter was used incorrectly in Buildroot -- it was set to the page
size of flash memory chip -- this commit fixes this problem.  Now the
--pagesize parameter is not used at all (unless the user explicitly chooses
to use a custom value during configuration).  All existing defconfigs were
corrected to match the new configuration variable names.

[Peter: reword, add Config.in.legacy handling]
Signed-off-by: Michał Leśniewski <mlesniew@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tiff: add hash

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdk-pixbuf: fix static build with libtiff

Fixes:
http://autobuild.buildroot.net/results/ce6/ce61d5aaf5dfdda92fcecb08a30b6093926d6f01/
http://autobuild.buildroot.net/results/76b/76b550da06fe547716f089e46d96a1406043268a/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/protobuf: autoreconf is now needed

Since its update, the *_SITE points to the git repository, so configure
script is not generated in this tarball.

Fixes:
  http://autobuild.buildroot.org/results/ccb/ccba6d8c73b5e826b86065b77b3fe5077db7b99c/
  http://autobuild.buildroot.org/results/57e/57ea34e9b48293075e10f0dd2331de2785730827/
  and many more...

[Peter: drop redundant HOST_*_AUTORECONF]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

newt: not available for static only builds

Fixes:
http://autobuild.buildroot.net/results/a40/a400e1fe7291d3bd3171ad04ce5fd7ba235d39af/
http://autobuild.buildroot.net/results/ec3/ec38d0f1d1faa2a87321bab10f87772eb819adc9/
http://autobuild.buildroot.net/results/7cb/7cbc8cd265d527c7b56d57e511903b23a4a84489/

newt uses autoconf but not automake, and unconditionally tries to build a
.so file - So it doesn't work in static only builds.

The only reverse dependency is network-manager, which already depends on
glibc.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpi-userland: not available for static only builds

Fixes:
http://autobuild.buildroot.net/results/e9e/e9ea569b5fe6fd875b3fa8f4eee82e3fddd95e90/
http://autobuild.buildroot.net/results/c97/c97f7df043469bc51ebbb41ddf30f8e82d4e6bb5/
http://autobuild.buildroot.net/results/ba8/ba82769109f205123834627bbf782bd1811ea43e/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

neardal: properly quote output of pkg-config

Commit 5504039c4e (neardal: fix readline/libedit detection with static
linking) added the output of pkg-config to the LIBS shell variable without
adding quotes around it, breaking the logic if the output would ever consist
of more than 1 word.

Now, pkg-config --libs ncurses currently only outputs '-lncurses', so
nothing is really broken (for now atleast), but lets add the quotes before
it does or the syntax gets copied somewhere else where it does.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

portaudio: fix static linking issue with portaudio

Fixes:
http://autobuild.buildroot.net/results/25f/25f8088ecb276ff4559a56fcc4f1b92d11f7deac/

As opposed to the other audio backends, the configure script does NOT use
pkg-config to figure out how to link with portaudio, breaking static linking
as portaudio uses pthreads.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jack2: not available for static only builds

Fixes:
http://autobuild.buildroot.net/results/e53/e537a500852ddb8aa0b1155ea9bc8a17636dd50d/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

exim: enable plaintext and cram-md5 authenticators

Fixes #8126

Signed-off-by: Mirko Langisch <pud@nerdpunx.net>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iproute2: ensure TARGET_LDFLAGS are used

Otherwise we can end up with various linker issues (E.G. linking shared
against libc for a static build, ..).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iproute2: needs host-pkgconf

The (handwritten) configure script uses pkg-config, so ensure it is
available.

With this in place XT and IPT_LIB_DIR detection works correctly, so drop the
overrides.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iproute2: disable xtables on static build

iproute2 always builds m_xt.so as a shared library.

Fixes:
http://autobuild.buildroot.net/results/f42/f42bbbf5be4594a8806d0e571586ce2bf119582d/
http://autobuild.buildroot.net/results/3b3/3b37871bdf5766677fc20dca22c13177091d104f/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/protobuf: Update site url

Package moved to github:
https://developers.google.com/protocol-buffers/docs/downloads
"Our old Google Code repositiory is: https://code.google.com/p/protobuf/.
We moved to github on Aug 26, 2014 [...]"

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qemu: Compare host/target Linux version only during build phase

This patch fixes an error during source-check.

Thanks to Thomas for the hint:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/116183

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/apr: Add libuuid as optional dependency

libuuid is picked up by apr when present:

Checking for OS UUID Support...
checking uuid/uuid.h usability... yes
checking uuid/uuid.h presence... yes
checking for uuid/uuid.h... yes
checking for library containing uuid_generate... -luuid
checking for uuid_generate... yes
checking for os uuid usability... yes

$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a output/target/usr/lib/libapr-1.so | grep libuuid
0x00000001 (NEEDED) Shared library: [libuuid.so.1]

[Thomas: move the added chunk a bit further down, and use += instead
of =.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/leafnode2: Update upstream URL

Upstream URL has changed:
http://article.gmane.org/gmane.network.leafnode/4773

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sqlite: fix parallel build failures

Fixes:
http://autobuild.buildroot.org/results/aed/aed3690689b60844e3278626da3c3eb75f2a2586/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/snmppp: Update site url

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/unionfs: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/usbredir: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ushare: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ux500-firmware: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/vpnc: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/wsapi: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/wavpack: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5base: remove never set QT5BASE_CONFIGURE_ENV

Since 1b54fbc925f4 (qt5base: fix postgresql plugin compile, 2015-02-19)
QT5BASE_CONFIGURE_ENV is never set. Remove it.

Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: fix PR 65730 (ICE on xtensa cores w/o hardware multiplication)

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libsigrok: blacklist CS powerpc toolchains

Even though BR2_PACKAGE_LIBSIGROKCXX is selected, the C++
binding is disabled due to lack of C++11 support in the toolchain.

Configure output:
Enabled language bindings:
- C++............................. no (C++11 compiler required)

So disable libsigrok C++ binding and pulseview for CS powerpc toolchains.

Fixes:
http://autobuild.buildroot.net/results/737/737453011ac0d13ab197258171ffa0f81bc4c368/

[Thomas: use 'depends on !foo && !bar' instead of 'depends on !(foo ||
bar)', seems it looks more logical in this situation.]

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freerdp: fix build with gstreamer support

FreeRDP with gstreamer support enabled needs gstreamer and gst-plugins-base
with gstapp.

Fixes:
http://autobuild.buildroot.net/results/937/9373d4238bc3f027e571581bd3531018c4faed91/
http://autobuild.buildroot.org/results/f77/f77a2c9eea7973b54a22e12ab33ee8964adaddfd/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: bump version to 5.6.9

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: add PHP_VERSION_MAJOR variable

Add PHP_VERSION_MAJOR variable to php.mk for use by other packages.
E.g. to install the Ioncube loader binary, it is necessary to
know the PHP major version.

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.0.4

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.10.x / 3.14.x / 4.0.x stable versions

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: fpm: remove sample status page

php-fpm installs a sample status page to $datadir/fpm/status.html
It is not of any use in that directory, so remove it from target.
If someone wants to use it, he can copy it to webroot manually.

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: enable opcache extension in php.ini if selected

Add a line to load the opcache extension in php.ini, at the
bottom of the "dynamic extensions" section.

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: patch acinclude.m4 instead of aclocal.m4

aclocal.m4 gets regenerated from acinclude.m4, so patch the last.

Fixes "Extensions are not supported on this platform" error when
loading any external (zend) extension in php.ini.
Was caused by 0001-ditch-unset.patch not being applied to the
correct file, and our ac_cv_func_dlopen=yes env setting being unset.

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: delete /usr/lib/php/build instead of /usr/lib/php

Fixes #8121

External PHP modules like the OPcache may live in
/usr/lib/php/extensions, so only delete /usr/lib/php/build

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jasper: Disable debugging when building for xtensa

xtensa gcc is not able to generate correct code when compiling with -O0
enabled by --enable-debug. Instead of disabling package build it with
--disable-debug.

Fixes:
http://autobuild.buildroot.net/results/5d17055027055ffd33fcd28b208130afb26343c9/

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jasper: Don't overwrite CFLAGS when configured with --enable-debug

This drops architecture-specific ABI flags, which may be important.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ntp: install after busybox

Make sure that ntp installs after busybox so that it overrides the busybox
provided ntpd applet.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

hwloc: fix condition to display comment message in menuconfig

The comment message shows up if the toolchain has threads instead
of not having threads.

Signed-off-by: Florent Valette <florent.valette@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: requires shared library support

gpsd always tries to build a shared library, so make it 'depends on
!BR2_STATIC_LIBS'. We also propagate this to the only gpsd reverse
dependency, the location support of sconeserver. While we're at it, we
add a comment indicating the dependencies of this location support,
which was missing.

Fixes:

http://autobuild.buildroot.org/results/f52/f5261a0933f9b5449d1f4e5cab1bb02e7154e683/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/wireless_tools: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libxml-parser-perl: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wvstreams: not available for static only builds

Also propagated to wvdial as it selects wvstreams.

Fixes:
http://autobuild.buildroot.org/results/0cd/0cd5e0263b42e6845504d97688632e16206bd000/
http://autobuild.buildroot.org/results/4e0/4e0ab461ea7ed7a288303741eec89156abd49864/

Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libuv: not available for static only builds

Fixes:
http://autobuild.buildroot.net/results/031/031c2c005f4946af5012be7432b55d11ca891d60/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/enlightenment: disable ptrace with xtensa and uClibc-ng

uCLibc-ng needs to backport the uClibc commit
de6561f6669308e5d2297589b39a217d4c14df1c to add
PT_GETSIGINFO definition.

This commit is already merged in uClibc-snapshot used by
Buildroot's toolchains for xtensa.

For now, disable ptrace with xtensa uClibc-ng toolchains.

Thanks to Gergely Imreh for the initial investigation and
patch:
http://patchwork.ozlabs.org/patch/470073/

Fixes:
http://autobuild.buildroot.net/results/77b/77b82e5b437d0778b3f6a3813f2c0a5c39b52db9

Reported-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lirc-tools: fix static library build caused by 'loglevel' redefinition

This commit adds a patch to lirc-tools to fix static library builds
caused by the redefinition of the loglevel variable.

Fixes:

http://autobuild.buildroot.org/results/2ac/2ac6a4f946d48cacff85d44d662e1c103f7443f8/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

duma: not available for static only builds

Fixes:

http://autobuild.buildroot.net/results/ccfc79586516a6ebb05badfad258aad0b6b9d2a2/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt: do not allow webkit with SuperH Sourcery toolchain

Building webkit with the SuperH Sourcery toolchain fails with an
assertion in binutils, so let's not allow to select webkit with this
toolchain. We do not need to worry about reverse dependencies, since
we use the existing BR2_PACKAGE_QT_ARCH_SUPPORTS_WEBKIT symbol to add
this new dependency.

Fixes:

http://autobuild.buildroot.net/results/508cdeb67f272b61209f331ab7b990cb56f30817/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/opencv: fix opencv.pc generation

This change fixes build of packages depending on opencv and using
pkg-config to get the opencv LDFLAGS, which were wrongly ordered for
static build and included absolute path pointing to the host system
libraries instead of the sysroot ones.

This patch fixes build issues with gst1-plugins-bad and vlc.

This change introduce and new patch to opencv, which is already merged
upstream [1].

Fixes:
http://autobuild.buildroot.net/results/c70/c70f793c7c3b380428d6e2e622a90805cffc4dd1/
... and many others

[1] https://github.com/Itseez/opencv/commit/eceada586bbf18fc267e437522ec4f1f23ddc656

Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ipmiutil: openssl support needs shared library

Fixes:
http://autobuild.buildroot.net/results/0d4/0d4e0ea8fdb233ea8e86f86b6fa406311a0279e2/
http://autobuild.buildroot.net/results/907/907ae0feb9ad2e4a0da4b38290a2b617cb4360a0/

The ipmiutil buildsystem doesn't take dependencies of libcrypto (E.G. zlib)
into consideration, causing link issues when linking statically.

The build system doesn't handle LIBS, so there is no simple way to fix this
outside patching the buildsystem. As we are very close to the release, lets
just mark it as !static for now.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ipmiutil: openssl is an optional dependency

So handle it as such (it is only needed for the lanplus functionality).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pulseaudio: needs dynamic library support

Fixes:
http://autobuild.buildroot.net/results/75a/75a3380fdcce88f1f9f2a77c4f059787623919d7/
http://autobuild.buildroot.net/results/f4a/f4a22344bd5c8f59e6f8cacb6a549f8d8fe99af2/

Pulseaudio uses dlfcn.h, so it cannot work in a pure static environment.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt: fix webkit dependencies

fix:
http://autobuild.buildroot.net/results/ce8/ce89ad1ca6aec9f7bb5549301bf4c0dcba9e0e37/

qtwebkit includes qscript headers.
For packages like python-pyqt if webkit is available but not qscript, the
compilation fails with :
buildroot/output/build/python-pyqt-4.11.3/sip/QtWebKit/qwebframe.sip:79:0:
../../../host/usr/i686-buildroot-linux-gnu/sysroot/usr/include/QtWebKit/qwebframe.h:28:36:
fatal error: QtScript/qscriptengine.h: No such file or directory

This problem is not seen with Qt compilation because some relative include
directly from sources are added.

[Peter: also adjust comment]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pyqt: fix install

PyQt4 provides two version for some py files: one for python2.x and one for
python3.x. This two versions are installed in TARGET_DIR.
After installing files, python is used to generate all .pyc files, but fails
like :
class ProxyBase(metaclass=ProxyMetaclass):
^
SyntaxError: invalid syntax

This is not a package build failure and this fix is only cosmetic.
This patch suppress directory for not targeted python version.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/heirloom-mailx: fix link issue with getopt

With NIOS2 toolchain, heirloom-mailx fail to build
due to missing -fPIC when linking with its own getopt.

Since static build for heirloom-mailx is disabled,
always pass -fPIC in CFLAGS.

Fixes:
http://autobuild.buildroot.net/results/333/33346f4555ed403bab7b739dd5d47814efa8eb4c

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mono: fix install with parallel builds

Due to a race in the 'install' utility, installing the same file twice
in parallel often results in one of the install calls to fail.

Ensure proper ordering of conflicting rules.

Fixes:
    http://autobuild.buildroot.org/results/c32/c3288c5d1fb94474f14a4a889e76135878d403bc/
    http://autobuild.buildroot.org/results/f70/f708e89f613ec0b42cdf49ccbef39b02f4a271fb/
    http://autobuild.buildroot.org/results/3cb/3cb99e5c5672cbaa2a86020129a05dfde47cdb8f/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>