winsys/amdgpu: do not iterate twice when adding fence dependencies

The perf difference is very small, 3.25->2.84% in amdgpu_cs_flush()
in the DXMD benchmark.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

winsys/amdgpu: add one likely() call in amdgpu_cs_flush()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

hud: fix compilation warnings in hud_nic_graph_install()

v2: use PRId64 instead of PRIx64

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: make st_texture_get_sampler_view() static

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: remove r600_common_context::max_db

this cleanup is based on the vulkan driver, which seems to do the same thing

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

winsys/amdgpu: fix ADDR_REGISTER_VALUE::backendDisables

This would be a fix if the value was used anywhere.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: clean up r600_query_init_backend_mask

This just needs to be done for r600g in the screen.
We don't need an IB submission for every new context created for GCN.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: precompute IA_MULTI_VGT_PARAM values into a table

The perf difference is very small: 0.99% -> 0.40% for the time spent
in si_get_ia_multi_vgt_param when si_draw_vbo is 20%. Pretty much nothing.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move VGT_VERTEX_REUSE_BLOCK_CNTL into shader states for Polaris

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: state atom IDs don't have to be off by one

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: use a bitmask for looping over dirty PM4 states

also move it to draw_vbo, because it should be 0 in most cases

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: atomize L2 prefetches

to move the big conditional statement out of draw_vbo

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: unbind disabled shader stages to prevent useless L2 prefetches

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: also prefetch compute shaders

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: update dirty_level_mask only after the first draw after FB change

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: allow VRAM-only placements again on APUs & recent amdgpu

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: don't set +fp64-denormals

it's the default and the name will change to +fp64-fp16-denormals.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: remove si_shader_context::param_tess_offchip

we don't use on-chip tess.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

etnaviv: force vertex buffers through the MMU

This fixes a vertex data corruption issue if some of the vertex streams
go through the MMU and some don't.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>

radv: Expose VK_KHR_maintenance1

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: Fix vkCmdCopyImage for 2d slices into 3d Images

Previously the z offset of the destination image was being ignored. It
should be taken into account when copying into a 3d target.

Also, img_extent_el.depth was being incorrectly clamped to 1 due to the
source image being VK_IMAGE_TYPE_2D. This would result in the blit
failing to iterate over all the 3d slices. Instead we clamp to the
destination image type.

Fixes failures in CTS tests:
dEQP-VK.api.copy_and_blit.image_to_image.3d_images.*

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: Expose transfer format features.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radv: Don't allow any operations on non-supported depth/stencil formats.

We really use the depth block for the blits.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: use new error codes for AllocateDescriptorSets

There is a new error code in Maintenance1 that is more specific to the
situation: VK_ERROR_OUT_OF_POOL_MEMORY_KHR

Fixes CTS test case:
dEQP-VK.api.descriptor_pool.out_of_pool_memory

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: vkAllocateCommandBuffers should NULL all output handles

This is part of the spec and fixes CTS tests:
dEQP-VK.api.object_management.alloc_callback_fail_multiple.command_buffer_*

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add trim command pool stub

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

i965: Support the force_glsl_version driconf option.

Gallium drivers have had this for a while.  It makes sense to support
it consistently across drivers, so expose it in i965 as well.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

i965: Fix check for negative pitch in can_do_fast_copy_blit().

At this point, the pitch is in bytes.  We haven't yet divided the pitch
by 4 for tiled surfaces, so abs(pitch) may be larger than 32K.  This
means the bit 15 trick won't work.

The caller now has signed integers anyway, so just pass those through
and do the obvious check.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radv: Handle command buffers that need scratch memory.

v2: Create the descriptor BO with CPU access.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Track scratch usage across pipelines & command buffers.

Based on code written by Dave Airlie.

Signed-off-by: Bas Nieuwenhuizen <basni@oogle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv/ac: Add compiler support for spilling.

Based on code written by Dave Airlie.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv/amdgpu: Support a preamble CS.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

i965: add assert to while_jumps_before_offset()

jip should always be negative here as its the result of
do instruction - while instruction.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: fix up asserts in brw_inst_set_jip()

We are casting from a signed 32bit int to an unsigned 16bit int
so shift 15 bits rather than 16.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

llvmpipe: Use LLVMDumpModule, not DumpModule.

Forgot the prefix ...

Fixes: 0fca80b3db64dc1d004f78e22b9de86a07e9de96
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>

various: Fix missing DumpModule with recent LLVM.

Since LLVM revision 293359 DumpModule gets only implemented when
either a debug build or LLVM_ENABLE_DUMP is set.

This patch adds a direct replacement for the function for radv and
radeonsi, However, as I don't know a good place to put common LLVM
code for all three I inlined the implementation for LLVMPipe.

v2: Use the new code for LLVM 3.4+ instead of LLVM 5+ & fixed indentation

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

r600g: use ieee variants of multiplication instructions

This matches the behavior of most other drivers, including nouveau,
radeonsi, and i965.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

r600g: add support for optionally using non-IEEE mul ops

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

vc4: Coalesce into TLB writes as well as VPM/tex.

This generally cuts an instruction when blending is enabled and we thus
have a single instruction generating the color value.

total instructions in shared programs: 91759 -> 91634 (-0.14%)
instructions in affected programs:     5338 -> 5213 (-2.34%)

vc4: Avoid an extra temporary and mov in ffloor/ffract/fceil.

shader-db results:

total instructions in shared programs: 92611 -> 91764 (-0.91%)
instructions in affected programs:     27417 -> 26570 (-3.09%)

The star is one shader in glmark2's terrain (drops 16% of its
instructions), but there are also wins in mupen64plus and glb2.7.

vc4: Flip the switch to run the GLSL compiler optimization loop once.

This has almost no effect on shader-db:

total instructions in shared programs: 92572 -> 92611 (0.04%)
instructions in affected programs:     4486 -> 4525 (0.87%)

Looking at 2 of the 7 different shaders that were hurt (all of which were
in mupen64), they all appear to be just differences in order of
instructions at the NIR level.

The advantage is that this should significantly reduce time in the compiler.

i965: Unbind deleted shaders from brw_context, fixing malloc heisenbug.

Applications may delete a shader program, create a new one, and bind it
before the next draw.  With terrible luck, malloc may randomly return a
chunk of memory for the new gl_program that happened to be the exact
same pointer as our previously bound gl_program.  In this case, our
logic to detect new programs in brw_upload_pipeline_state() would break:

      if (brw->vertex_program != ctx->VertexProgram._Current) {
         brw->vertex_program = ctx->VertexProgram._Current;
         brw->ctx.NewDriverState |= BRW_NEW_VERTEX_PROGRAM;
      }

Because the pointer is the same, we'd think it was the same program.
But it could be wildly different - a different stage altogether,
different sets of resources, and so on.  This causes utter chaos.

As unlikely as this seems, I believe I hit this when running a subset
of the CTS in a loop, in a group of tests that churns through simple
programs, deleting and rebuilding them.  Presumably malloc uses a
bucketing cache of sorts, and so freeing up a gl_program and allocating
a new one fairly quickly causes it to reuse that memory.

The result was that brw->vertex_program->info.num_ssbos claimed the
program had SSBOs, while brw->vs.base.prog_data.binding_table claimed
that there were none.  This was crazy, because the binding table is
calculated from info.num_ssbos - the shader info appeared to change
between shader compile time and draw time.  Careful use of watchpoints
revealed that it was being clobbered by rzalloc's memset when building
an entirely different program...

Fortunately, our 0xd0d0d0d0 canary for unused binding table entries
caused us to crash out of bounds when trying to upload SSBOs, or we
may have never discovered this heisenbug.

Fixes crashes in GL45-CTS.compute_shader.sso-case2 when using a hacked
cts-runner that only runs GL45-CTS.compute_shader.s* in EGL config ID 5
at 64x64 in a loop with 100 iterations.

Cc: "17.0 13.0 12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radv/ac: Use base in push constant loads.

Apparently the source is not an address but an offset, so we actually
need to use the base.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
CC: <mesa-stable@lists.freedesktop.org>

radv: drop support for VK_AMD_NEGATIVE_VIEWPORT_HEIGHT

This extension was not correctly supported, and it conflicts with the
VK_KHR_MAINTENANCE1 spec.

Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: implement VK_KHR_GET_PHYSICAL_DEVICE_PROPERTIES_2

Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: use proper maximum slice for layered view

this fixes deferred shadows with geom shaders enabled.

but I think this fix is fine by itself.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965/sync: Implement fences based on Linux sync_file

This patch implements a new type of struct brw_fence, one that is based
struct sync_file.

This completes support for EGL_ANDROID_native_fence_sync.

* Background

  Linux 4.7 added a new file type, struct sync_file. See

    commit 460bfc41fd52959311ed0328163f785e023857af
    Author:  Gustavo Padovan <gustavo.padovan@collabora.co.uk>
    Date:    Thu Apr 28 10:46:57 2016 -0300
    Subject: dma-buf/sync_file: de-stage sync_file headers

  A sync file is a cross-driver explicit synchronization primitive. In a
  sense, sync_file's relation to synchronization is similar to dma_buf's
  relation to memory: both are primitives that can be imported and
  exported across drivers (at least in theory).

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965/sync: Rename brw_fence_insert()

Rename to brw_fence_insert_locked(). This is correct because the fence's
mutex is effectively locked, as all callers are also *creators* of the
fence, and have not yet returned the new fence.

This reduces noise in the next patch, which defines and uses
brw_fence_insert(), an unlocked variant.

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965/sync: Fail sync creation when batchbuffer flush fails

Pre-patch, brw_sync.c ignored the return value of
intel_batchbuffer_flush().

When intel_batchbuffer_flush() fails during eglCreateSync
(brw_dri_create_fence), we now give up, cleanup, and return NULL.

When it fails during glFenceSync, however, we blindly continue and hope
for the best because there does not exist yet a way to tell core GL that
sync creation failed.

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965/sync: Add brw_fence::type

This a refactor patch; no expected changed in behavior.

Add `enum brw_fence_type` and brw_fence::type. There is only one type
currently, BRW_FENCE_TYPE_BO_WAIT. This patch reduces a lot of noise in
the next, which adds new type BRW_FENCE_TYPE_SYNC_FD.

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add intel_batchbuffer_flush_fence()

A variant of intel_batchbuffer_flush() with parameters for in and out
fence fds.

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add intel_screen::has_fence_fd

This bool maps to I915_PARAM_HAS_EXEC_FENCE_FD.

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

configure: Require libdrm >= 2.4.75

Required to implement EGL_ANDROID_native_fence_sync on i965.
Specifically, i965 needs drm_intel_gem_bo_exec_fence(),
I915_PARAM_HAS_EXEC_FENCE, and libsync.h.

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

configure.ac: list radeon in --with-vulkan-drivers help string

Analogous to what we do for the dri and gallium drivers.

Cc: 17.0 13.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@colllabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: automake: Don't install vk_platform.h or vulkan.h.

These files belong to the vulkan loader.

Identical to
045f38a5075 vulkan: Don't install vk_platform.h or vulkan.h.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

anv: Advertise API version 1.0.39

I'm pretty sure we've kept up with the bug fixes.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

gbm/dri: fix memory leaks in error path

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
[Emil Velikov: make sure it builds]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

docs/releasing: add a note about the relnotes template

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

mesa: remove explicit __STDC_FORMAT_MACROS define

Analogous to previous commits.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

nouveau: remove explicit __STDC_FORMAT_MACROS define

Already handled by the build.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

scons: swr: remove explicit __STDC_.*_MACROS defines

Analogous to previous commits.

Cc: George Kyriazis <george.kyriazis@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

gallium: remove explicit __STDC_.*_MACROS defines

Analogous to previous commits.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

gallivm: remove explicit __STDC_.*_MACROS defines

Correctly handled by the build systems.

Cc: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

glsl: remove explicit __STDC_FORMAT_MACROS define

Correctly handled by all the build systems.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

autoconf: set all __STDC_*_MACROS

Analogous to previous commit(s), with a minor detail - here we set the
macros when building both C and C++ sources.

Resolving that is a more challenging task that we'll sort out another
day.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

scons: always set __STDC_*_MACROS for C++ sources

Analogous to previous commit - just set the lot once throughout.

Cc: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

android: always set __STDC_*_MACROS for C++ sources

Various parts of the code depend on the macros being defined.

Just set those unconditionally, only where needed (c++ sources) so that
we can drop the workarounds through the code.

Cc: Rob Herring <robh@kernel.org>
Cc: Chih-Wei Huang <cwhuang@android-x86.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

st/xa: automake: remove duplicate -Wall

Already handled by configure.ac

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

mesa: move variable declaration to where its used

The variable replacement was unused when building w/o
ENABLE_SHADER_CACHE. Since we can mix variable declarations and code,
move it to where its used.

Fixes: 9f8dc3bf03e "utils: build sha1/disk cache only with
Android/Autoconf"
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: use correct return statement for a void function

Analogous to previous commit.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

mesa: use correct return statement for a void function

Using return foo() is incorrect even if foo itself returns void.
Spotted by AppVeyor, as below:

teximage.c(3653) : warning C4098: 'copyteximage' : 'void' function returning a value

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

svga: remove const qualifier from SVGA3D_vgpu10_GenMips() prototype

Does not match the function definition or how it's used. Triggers the
following warning in AppVeyor

svga_cmd_vgpu10.c(1301) : warning C4028: formal parameter 2 different from declaration

Cc: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

nir: add extra const notation in compare_blocks()

MSVC warns about different const qualifiers. Add the extra const to
silence it.

nir_phi_builder.c(244) : warning C4090: 'initializing' : different 'const' qualifiers
nir_phi_builder.c(245) : warning C4090: 'initializing' : different 'const' qualifiers

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

nir: silence implicit conversion to 64bit

MSVC warns about implicit conversion as below. Annotate the literal
appropriately to silence the warning.

nir_gather_info.c(249) : warning C4334: '<<' : result of 32-bit shift
implicitly converted to 64 bits (was 64-bit shift intended?)

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i915, i965: automake: remove NA include directive

The path in question (... dri/intel/server) was removed years ago.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

mesa/tests: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

dri/osmesa: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

dri/swrast: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

radeon, r200: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

mapi: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

loader: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

glx/windows: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Jon Turney <jon.turney@dronecode.org.uk>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

glx/apple: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jeremy Sequoia <jeremyhu@apple.com>

glx: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

d3dadapter9: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

st/dri: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

clover: automake: remove -I$(srcdir)

Already implicitly handled by the build system.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Aaron Watry <awatry@gmail.com>

clover: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Aaron Watry <awatry@gmail.com>
Cc: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

egl: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

i915: automake: include builddir prior to srcdir

Analogous to previous commit.

Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

i965: automake: include builddir prior to srcdir

The latter can contain stale generated file, which, as-is, we'll end up
using.

Fixes: bfd17c76c12 "i965: Port INTEL_PRECISE_TRIG=1 to NIR."
Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

freedreno: automake: correctly set MKDIR_GEN

Analogous to previous commit.

Fixes: 4610e5ef28e "freedreno/ir3: fix sin/cos"
Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>

i965: automake: correctly set MKDIR_GEN

Otherwise we might end up w/o the respective folder (depending on
autotools version) and fail at build time.

Fixes: bfd17c76c12 "i965: Port INTEL_PRECISE_TRIG=1 to NIR."
Cc: "12.0 13.0" <mesa-dev@lists.freedesktop.org>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

anv: add missing extension errors in vk_errorf()

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: add missing core errors in vk_errorf()

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: don't assert on out of memory descriptor pool in debug mode

Fixes:
   dEQP-VK.api.descriptor_pool.out_of_pool_memory

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

docs/repository: fix name of main branch

This is git, not svn :P

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

egl: EGL_PLATFORM_SURFACELESS_MESA is now upstream

EGL_PLATFORM_SURFACELESS_MESA is in eglext.h as of last commit.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

egl: update headers from registry

Khronos introduced a new macro (suggested by Google) to avoid using
C-style casts in C++ code, as those generate warnings.

Khronos Bugzilla: https://cvs.khronos.org/bugzilla/show_bug.cgi?id=16113
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

radv: add missing extension errors in vk_errorf()

v2(Bas): Remove the extra VK_ERROR_FRAGMENTED_POOL cases.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>