Alan Hayward [Fri, 17 May 2019 15:48:36 +0000 (16:48 +0100)]
testsuite: Remove TRANSCRIPT support
TRANSCRIPT is superseeded by the .in, .cmd and .debug files, and
can be removed.
gdb/testsuite/ChangeLog
* README (Running the Testsuite): Change example.
(Testsuite Parameters): Remove TRANSCRIPT.
* lib/gdb.exp: Remove TRANSCRIPT check.
Alan Hayward [Tue, 30 Apr 2019 15:00:29 +0000 (16:00 +0100)]
testsuite: Add replay logging to GDBSERVER_DEBUG
Add "replay" to the list of GDBSERVER_DEBUG options. This will
cause a gdbserver.replay file to be written to the test output
directory.
At the same time switch this to a comma separated list in order
to easily handle all possible options.
The replay log is created by GDB, but has been added to
GDBSERVER_DEBUG as it is only required for gdbserver tests. To
enable it, the gdb_debug_init is overridden to allow the additional
checking, before calling the original function.
gdb/testsuite/ChangeLog:
* README (Testsuite Parameters): Add replay logging to
GDBSERVER_DEBUG.
(gdbserver,debug): Refer to GDBSERVER_DEBUG.
* lib/gdbserver-support.exp (gdbserver_start): Treat gdbserverdebug
as a comma separated list.
(gdb_debug_init): Override procedure.
Alan Hayward [Fri, 17 May 2019 15:38:02 +0000 (16:38 +0100)]
testsuite: Create .cmd files for gdb and gdbserver
When spawning gdb or gdbserver create a .cmd file in the test output
directory containing the full command line, ensuring the current gdb
instance is appended to the files so that they can be quickly matched
to the corresponding gdb.in file.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (default_gdb_spawn): Call gdb_write_cmd_file.
(gdb_write_cmd_file): New procedure.
* lib/gdbserver-support.exp (gdbserver_start): Call
gdbserver_write_cmd_file.
(gdbserver_write_cmd_file): New proedure.
Alan Hayward [Fri, 17 May 2019 15:30:09 +0000 (16:30 +0100)]
testsuite: Record all gdb input to gdb.in
When debugging testsuite failures, it can be awkward parsing gdb.log to
obtain all the commands run in order to manually re-run the test.
This patch adds the functionality to save all gdb commands to the file gdb.in
when the testsuite is run. The file is saved in the directory for the test and
if gdb is restarted then .1, .2, .3 etc is added to the filename.
Once a test has been run, the .in file can be used to re-run the test in the
following way:
gdb -x outputs/gdb.store/gdb.in outputs/gdb.store/store
The code works by intercepting send_gdb. I've added a TYPE to ensure that any
commands that would destroy the playback are kept from the log (for example the
Y from an answer to a y/n question).
Adds library function standard_output_file_with_gdb_instance to open a file
postfixed with count of the gdb instance. Ensure this count is reset when a new
.exp script is run.
I've re-run a random selection of .in files to check they do not error. Logs with
commands such as "attach <pid>" will not directly work when re-run.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_unload): Mark Y as an answer.
(delete_breakpoints): Likewise.
(gdb_run_cmd): Likewise.
(gdb_start_cmd): Likewise.
(gdb_starti_cmd): Likewise.
(gdb_internal_error_resync): Likewise.
(gdb_test_multiple): Likewise.
(gdb_reinitialize_dir): Likewise.
(default_gdb_exit): Likewise.
(gdb_file_cmd): Mark kill as optional.
(default_gdb_start): Call gdb_stdin_log_init.
(send_gdb): Call gdb_stdin_log_write.
(rerun_to_main): Mark Y as an answer.
(gdb_stdin_log_init): New function.
(gdb_stdin_log_write): Likewise.
Alan Hayward [Fri, 17 May 2019 14:35:08 +0000 (15:35 +0100)]
testsuite: Disable some tests when logging
Fix up all failures encountered when running the testsuite with
GDB_DEBUG="infrun".
Some tests rely on enabling debugging for various components. With
debugging on, this will be lost to the debug file.
Disable separate tty for mi tests when debugging. This currently
does not work.
disasm.c should send errors to the stderr instead of the logfile.
Note that enabling debug for other components might still cause
additional errors above what has been fixed here.
gdb/ChangeLog:
* disasm.c (set_disassembler_options): Send errors to stderr.
gdb/testsuite/ChangeLog:
* gdb.base/breakpoint-in-ro-region.exp: Disable when debugging.
* gdb.base/debug-expr.exp: Likewise.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/fork-print-inferior-events.exp: Likewise.
* gdb.base/gdb-sigterm.exp: Likewise.
* gdb.base/gdbinit-history.exp: Likewise.
* gdb.base/osabi.exp: Likewise.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
* gdb.base/ui-redirect.exp: Likewise.
* gdb.gdb/unittest.exp: Likewise.
* gdb.mi/mi-break.exp: Disable separate-mi-tty when debugging.
* gdb.mi/mi-watch.exp: Likewise.
* gdb.mi/new-ui-mi-sync.exp: Likewise.
* gdb.mi/user-selected-context-sync.exp: Likewise.
* gdb.python/python.exp: Disable debug test when debugging.
* gdb.threads/check-libthread-db.exp: Disable when debugging.
* gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
Likewise.
* gdb.threads/stepi-random-signal.exp: Likewise.
Alan Hayward [Fri, 17 May 2019 13:35:23 +0000 (14:35 +0100)]
testsuite: Add option to capture GDB debug
Add both board option and environment variable which enables gdb
debug via a comma separated list and sends it to the file gdb.debug,
located in the output directory for the current test. Document this.
Add support for the environment variable in the Makefile.
The testsuite can be run with gdb debug enabled in the following way:
make check GDB_DEBUG="infrun,target,remote"
A Test with multiple invocations of GDB will all append debug to the
same log file.
gdb/testsuite/ChangeLog:
* Makefile.in: Pass through GDB_DEBUG.
* README (Testsuite Parameters): Add GDB_DEBUG.
(gdb,debug): Add board setting.
* lib/gdb.exp (default_gdb_start): Start debugging.
(gdb_debug_enabled): New procedure.
(gdb_debug_init): Likewise.
Alan Hayward [Fri, 17 May 2019 13:15:01 +0000 (14:15 +0100)]
Add debug redirect option
Currently, when logging is enabled, output will be sent to both a
logfile and standard terminal output. The redirect option sends output
only to the logfile. This includes all debug output.
Add the option to redirect debug output seperately to normal
output, using the cli command:
set logging debugredirect on
By setting this and enabling logging, all output and debug will
be sent to the logfile. The user will still see all output but
no debug output.
This causes a change in behaviour for anyone currently using
logging redirect, as now only output will be redirected. Users
will have to issue the additional command above to also redirect
debug.
Expand ui-redirect.exp cover the changes.
gdb/ChangeLog:
* cli/cli-interp.c (struct saved_output_files): Add saved entry.
(cli_interp_base::set_logging): Check debug_redirect.
* cli/cli-interp.h (set_logging): Add debug_redirect parameter.
* cli/cli-logging.c (debug_redirect): Add static variable.
(pop_output_files): Add default param.
(handle_redirections): Print debug setting.
(show_logging_command): Likewise.
(_initialize_cli_logging): Add debugredirect command.
* interps.c (current_interp_set_logging): Add debug_redirect
parameter.
* interps.h (set_logging): Add debug_redirect parameter.
(current_interp_set_logging): Likewise.
* mi/mi-common.h: Likewise.
* mi/mi-interp.c (mi_interp::set_logging): Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/ui-redirect.exp: Add debug redirect tests.
John Darrington [Fri, 17 May 2019 13:05:44 +0000 (15:05 +0200)]
GAS (documentation): Remove trademark acknowledgements.
GNU policy is not to include trademark acknowlegements in
documentation [1]
[1] https://www.gnu.org/prep/standards/html_node/Trademarks.html
Committing as obvious.
gas/
* doc/c-arm.texi (ARM Options): Remove "(r)" and "(tm)"
* doc/c-bfin.texi (Blackfin Syntax): Remove "(r)"
Alan Hayward [Fri, 17 May 2019 13:07:04 +0000 (14:07 +0100)]
Change file close behavior for tee_file
Instead of using two bools to decide if the files should close when tee_file
is closed, make file one stay open and file two close. This simplifies the
use cases for it.
Inline the make_logging_output into the calling functions (the logic here
looks ugly in order to simplify a later change).
Expand ui-redirect.exp to cover the changes, similar to mi-logging.exp.
gdb/ChangeLog:
* cli/cli-interp.c (cli_interp_base::set_logging): Create tee_file
directly.
* cli/cli-interp.h (make_logging_output): Remove declaration.
* cli/cli-logging.c (make_logging_output): Remove function.
* mi/mi-interp.c (mi_interp::set_logging): Create tee_file
directly.
* ui-file.c (tee_file::tee_file): Remove bools.
(tee_file::~tee_file): Remove deletes.
* ui-file.h (tee_file): Remove bools.
gdb/testsuite/ChangeLog:
* gdb.base/ui-redirect.exp: Test redirection.
Alan Modra [Fri, 17 May 2019 09:39:42 +0000 (19:09 +0930)]
PR24567, assertion failure in ldlang.c:6868 when compiling with -flto
As the existing comment said: "a common ought to be overridden by a
def in a -flto object". This patch makes the code actually do that,
rather than allowing a normal object file common to override a -flto
defined symbol.
PR 24567
* plugin.c (plugin_notice): Do not let a common symbol override
a non-common definition in IR.
Jan Vrany [Fri, 17 May 2019 09:58:23 +0000 (10:58 +0100)]
MI: Add new command -complete
There is a CLI command 'complete' intended to use with emacs. Such a command
would also be useful for MI frontends, when separate CLI and MI channels cannot
be used. For example, on Windows (because of lack of PTYs) or when GDB is used
through SSH session.
This commit adds a new '-complete' MI command.
gdb/Changelog:
2019-01-28 Jan Vrany <jan.vrany@fit.cvut.cz>
* mi/mi-cmds.h (mi_cmd_complete): New function.
* mi/mi-main.c (mi_cmd_complete): Likewise.
* mi/mi-cmds.c: Define new MI command -complete.
* NEWS: Mention new -complete command.
gdb/doc/ChangeLog:
2019-01-28 Jan Vrany <jan.vrany@fit.cvut.cz>
* gdb.texinfo (Miscellaneous GDB/MI Commands): Document new
MI command -complete.
gdb/testsuite/ChangeLog:
2019-01-28 Jan Vrany <jan.vrany@fit.cvut.cz>
* gdb.mi/mi-complete.exp: New file.
* gdb.mi/mi-complete.cc: Likewise.
Jan Vrany [Fri, 17 May 2019 09:58:23 +0000 (10:58 +0100)]
MI: extract command completion logic from complete_command()
Extract completion logic from CLI complete_command() into a new
helper function complete().
gdb/Changelog:
* completer.h (complete): New function.
* completer.c (complete): Likewise.
* cli/cli-cmds.c: (complete_command): Update to use new complete()
function defined in completer.h.
Jan Vrany [Fri, 17 May 2019 09:48:12 +0000 (10:48 +0100)]
Add myself to gdb/MAINTAINERS
gdb/Changelog:
* MAINTAINERS (Write After Approval): Add myself.
Tom de Vries [Fri, 17 May 2019 07:35:19 +0000 (09:35 +0200)]
[gdb] Fix heap-use-after-free in typename_concat
When running gdb using AddressSanitizer, and loading a cc1plus binary built
with profiledbootstrap and -flto, we run into a heap-use-after-free error:
...
$ LD_PRELOAD=/usr/lib64/libasan.so.3 ./gdb -batch cc1plus
==26855==ERROR: AddressSanitizer: heap-use-after-free on address \
0x62100ad8a8b0 at pc 0x7f13803cc9e3 bp 0x7ffe55b0d090 sp 0x7ffe55b0c840
READ of size 47 at 0x62100ad8a8b0 thread T0
#0 0x7f13803cc9e2 (/usr/lib64/libasan.so.3+0x3e9e2)
#1 0x5e7a0d in typename_concat gdb/dwarf2read.c:22661
#2 0x5c6437 in partial_die_full_name gdb/dwarf2read.c:8876
#3 0x5c6555 in add_partial_symbol gdb/dwarf2read.c:8893
#4 0x5c6ecf in add_partial_subprogram gdb/dwarf2read.c:9156
#5 0x5c5e90 in scan_partial_symbols gdb/dwarf2read.c:8668
#6 0x5c6c0a in add_partial_namespace gdb/dwarf2read.c:9081
#7 0x5c5f99 in scan_partial_symbols gdb/dwarf2read.c:8702
#8 0x5c48b6 in process_psymtab_comp_unit_reader gdb/dwarf2read.c:8056
#9 0x5c3c1f in init_cutu_and_read_dies gdb/dwarf2read.c:7689
#10 0x5c4c03 in process_psymtab_comp_unit gdb/dwarf2read.c:8140
#11 0x5c58a2 in dwarf2_build_psymtabs_hard gdb/dwarf2read.c:8500
#12 0x5c0d03 in dwarf2_build_psymtabs(objfile*) gdb/dwarf2read.c:6337
#13 0x612359 in read_psyms gdb/elfread.c:1311
#14 0x798a64 in require_partial_symbols(objfile*, int) gdb/psymtab.c:115
#15 0x867d7b in read_symbols gdb/symfile.c:821
#16 0x8683d9 in syms_from_objfile_1 gdb/symfile.c:1000
#17 0x8684a1 in syms_from_objfile gdb/symfile.c:1017
#18 0x868873 in symbol_file_add_with_addrs gdb/symfile.c:1124
#19 0x868b0a in symbol_file_add_from_bfd(bfd*, char const*, \
enum_flags<symfile_add_flag>, std::vector<other_sections, \
std::allocator<other_sections> >*, \
enum_flags<objfile_flag>, objfile*) gdb/symfile.c:1204
#20 0x868b64 in symbol_file_add(char const*, \
enum_flags<symfile_add_flag>, \
std::vector<other_sections, \
std::allocator<other_sections> >*, \
enum_flags<objfile_flag>) gdb/symfile.c:1217
#21 0x868c39 in symbol_file_add_main_1 gdb/symfile.c:1240
#22 0x868bd0 in symbol_file_add_main(char const*, \
enum_flags<symfile_add_flag>) gdb/symfile.c:1231
#23 0x71f1b2 in symbol_file_add_main_adapter gdb/main.c:395
#24 0x71f10e in catch_command_errors gdb/main.c:372
#25 0x71ff5f in captured_main_1 gdb/main.c:1043
#26 0x72045d in captured_main gdb/main.c:1163
#27 0x7204c8 in gdb_main(captured_main_args*) gdb/main.c:1188
#28 0x40fd7d in main gdb/gdb.c:32
#29 0x7f137e300f49 in __libc_start_main (/lib64/libc.so.6+0x20f49)
#30 0x40fc89 in _start (/data/gdb_versions/devel/build/gdb/gdb+0x40fc89)
0x62100ad8a8b0 is located 944 bytes inside of 4064-byte region \
[0x62100ad8a500,0x62100ad8b4e0)
freed by thread T0 here:
#0 0x7f13804523a0 in __interceptor_free (/usr/lib64/libasan.so.3+0xc43a0)
#1 0x435e44 in xfree<void> gdb/common/common-utils.h:60
#2 0xa82c25 in call_freefun libiberty/obstack.c:103
#3 0xa83098 in _obstack_free libiberty/obstack.c:280
#4 0x4367da in auto_obstack::~auto_obstack() gdb/gdb_obstack.h:101
#5 0x5ed72c in dwarf2_cu::~dwarf2_cu() gdb/dwarf2read.c:25341
#6 0x5fb5bb in std::default_delete<dwarf2_cu>::operator()(dwarf2_cu*) const \
/usr/include/c++/7/bits/unique_ptr.h:78
#7 0x5f7334 in std::unique_ptr<dwarf2_cu, \
std::default_delete<dwarf2_cu> >::~unique_ptr() \
/usr/include/c++/7/bits/unique_ptr.h:268
#8 0x5c3ce5 in init_cutu_and_read_dies gdb/dwarf2read.c:7624
#9 0x5c4c03 in process_psymtab_comp_unit gdb/dwarf2read.c:8140
#10 0x5c58a2 in dwarf2_build_psymtabs_hard gdb/dwarf2read.c:8500
#11 0x5c0d03 in dwarf2_build_psymtabs(objfile*) gdb/dwarf2read.c:6337
#12 0x612359 in read_psyms gdb/elfread.c:1311
#13 0x798a64 in require_partial_symbols(objfile*, int) gdb/psymtab.c:115
#14 0x867d7b in read_symbols gdb/symfile.c:821
#15 0x8683d9 in syms_from_objfile_1 gdb/symfile.c:1000
#16 0x8684a1 in syms_from_objfile gdb/symfile.c:1017
#17 0x868873 in symbol_file_add_with_addrs gdb/symfile.c:1124
#18 0x868b0a in symbol_file_add_from_bfd(bfd*, char const*, \
enum_flags<symfile_add_flag>, std::vector<other_sections, \
std::allocator<other_sections> >*, \
enum_flags<objfile_flag>, objfile*) gdb/symfile.c:1204
#19 0x868b64 in symbol_file_add(char const*, \
enum_flags<symfile_add_flag>, std::vector<other_sections, \
std::allocator<other_sections> >*, \
enum_flags<objfile_flag>) gdb/symfile.c:1217
#20 0x868c39 in symbol_file_add_main_1 gdb/symfile.c:1240
#21 0x868bd0 in symbol_file_add_main(char const*, \
enum_flags<symfile_add_flag>) gdb/symfile.c:1231
#22 0x71f1b2 in symbol_file_add_main_adapter gdb/main.c:395
#23 0x71f10e in catch_command_errors gdb/main.c:372
#24 0x71ff5f in captured_main_1 gdb/main.c:1043
#25 0x72045d in captured_main gdb/main.c:1163
#26 0x7204c8 in gdb_main(captured_main_args*) gdb/main.c:1188
#27 0x40fd7d in main gdb/gdb.c:32
#28 0x7f137e300f49 in __libc_start_main (/lib64/libc.so.6+0x20f49)
previously allocated by thread T0 here:
#0 0x7f13804526b8 in __interceptor_malloc (/usr/lib64/libasan.so.3+0xc46b8)
#1 0x5114b5 in xmalloc gdb/common/common-utils.c:44
#2 0xa82bd5 in call_chunkfun libiberty/obstack.c:94
#3 0xa82eda in _obstack_newchunk libiberty/obstack.c:206
#4 0x477310 in allocate_on_obstack::operator new(unsigned long, obstack*) \
gdb/gdb_obstack.h:117
#5 0x5dea8c in load_partial_dies gdb/dwarf2read.c:18571
#6 0x5c487f in process_psymtab_comp_unit_reader gdb/dwarf2read.c:8054
#7 0x5c3c1f in init_cutu_and_read_dies gdb/dwarf2read.c:7689
#8 0x5c4c03 in process_psymtab_comp_unit gdb/dwarf2read.c:8140
#9 0x5c58a2 in dwarf2_build_psymtabs_hard gdb/dwarf2read.c:8500
#10 0x5c0d03 in dwarf2_build_psymtabs(objfile*) gdb/dwarf2read.c:6337
#11 0x612359 in read_psyms gdb/elfread.c:1311
#12 0x798a64 in require_partial_symbols(objfile*, int) gdb/psymtab.c:115
#13 0x867d7b in read_symbols gdb/symfile.c:821
#14 0x8683d9 in syms_from_objfile_1 gdb/symfile.c:1000
#15 0x8684a1 in syms_from_objfile gdb/symfile.c:1017
#16 0x868873 in symbol_file_add_with_addrs gdb/symfile.c:1124
#17 0x868b0a in symbol_file_add_from_bfd(bfd*, char const*, \
enum_flags<symfile_add_flag>, \
std::vector<other_sections, \
std::allocator<other_sections> >*, \
enum_flags<objfile_flag>, objfile*) gdb/symfile.c:1204
#18 0x868b64 in symbol_file_add(char const*, enum_flags<symfile_add_flag>, \
std::vector<other_sections, \
std::allocator<other_sections> >*, \
enum_flags<objfile_flag>) gdb/symfile.c:1217
#19 0x868c39 in symbol_file_add_main_1 gdb/symfile.c:1240
#20 0x868bd0 in symbol_file_add_main(char const*, \
enum_flags<symfile_add_flag>) gdb/symfile.c:1231
#21 0x71f1b2 in symbol_file_add_main_adapter gdb/main.c:395
#22 0x71f10e in catch_command_errors gdb/main.c:372
#23 0x71ff5f in captured_main_1 gdb/main.c:1043
#24 0x72045d in captured_main gdb/main.c:1163
#25 0x7204c8 in gdb_main(captured_main_args*) gdb/main.c:1188
#26 0x40fd7d in main gdb/gdb.c:32
#27 0x7f137e300f49 in __libc_start_main (/lib64/libc.so.6+0x20f49)
...
This error happens as follows.
The function find_partial_die has a cu argument, but returns a pdi which may
or may not be from that cu:
...
/* Find a partial DIE at OFFSET, which may or may not be in CU,
except in the case of .debug_types DIEs which do not reference
outside their CU (they do however referencing other types via
DW_FORM_ref_sig8). */
static struct partial_die_info *
find_partial_die (sect_offset sect_off, int offset_in_dwz, struct dwarf2_cu *cu)
...
So the pdi returned by find_partial_die here in partial_die_parent_scope may
be from another cu:
...
partial_die_parent_scope (struct partial_die_info *pdi,
struct dwarf2_cu *cu)
{
const char *grandparent_scope;
struct partial_die_info *parent, *real_pdi;
/* We need to look at our parent DIE; if we have a DW_AT_specification,
then this means the parent of the specification DIE. */
real_pdi = pdi;
while (real_pdi->has_specification)
real_pdi = find_partial_die (real_pdi->spec_offset,
real_pdi->spec_is_dwz, cu);
parent = real_pdi->die_parent;
...
in which case both real_pdi and parent will be not from cu, but from another
one, say cu2.
Subsequently, cu's comp_unit_obstack is used to set parent->scope:
...
parent->scope = typename_concat (&cu->comp_unit_obstack,
grandparent_scope,
parent->name, 0, cu);
...
So, we use cu->comp_unit_obstack to assign a value to the scope field of
a pdi belonging to cu2, and when cu is deleted, the scope field points to a
freed value.
Fix this by making find_partial_die return the cu corresponding to the
returned pdi, and handling this at the call sites.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-05-17 Tom de Vries <tdevries@suse.de>
PR gdb/24094
* dwarf2read.c (struct cu_partial_die_info): New struct.
(find_partial_die): Return cu_partial_die_info.
(partial_die_parent_scope, guess_partial_die_structure_name)
(partial_die_info::fixup): Handle new return type of find_partial_die.
GDB Administrator [Fri, 17 May 2019 00:00:14 +0000 (00:00 +0000)]
Automatic date update in version.in
Sergio Durigan Junior [Thu, 16 May 2019 20:23:24 +0000 (16:23 -0400)]
Make stap-probe.c:stap_parse_register_operand's "regname" an std::string
This patch simplifies the code of
stap-probe.c:stap_parse_register_operand by making "regname" an
std::string. No functionality change.
I'm this code's maintainer, so I'm pushing this as it's a fairly
trivial patch.
gdb/ChangeLog:
2019-05-16 Sergio Durigan Junior <sergiodj@redhat.com>
* stap-probe.c (stap_parse_register_operand): Make "regname" an
"std::string", simplifying the algorithm.
Sergio Durigan Junior [Thu, 16 May 2019 20:20:39 +0000 (16:20 -0400)]
Fix complaint string formatting on stap-probe.c
I think the string formatting for complaints was messed up by Tom's
patch to simplify the complaint mechanism. This small and trivial
patch fixes them.
Pushed as obvious.
gdb/ChangeLog:
2019-05-16 Sergio Durigan Junior <sergiodj@redhat.com>
* stap-probe.c (handle_stap_probe): Fix complaint formatting.
(stap_static_probe_ops::get_probes): Likewise.
Sergio Durigan Junior [Thu, 16 May 2019 20:17:30 +0000 (16:17 -0400)]
Slightly improve logic of some operations on stap-probe.c
This patch contains three very small improvement on the logic of some
operations we do on stap-probe.c. They don't change what the code
does.
Pushed as obvious.
gdb/ChangeLog:
2019-05-16 Sergio Durigan Junior <sergiodj@redhat.com>
* stap-probe.c (stap_parse_register_operand): Make "if (*p->arg ==
'-')" and "else if".
(stap_parse_single_operand): Join checks for
"gdbarch_stap_parse_special_token_p" and
"gdbarch_stap_parse_special_token" in the same "if" statement.
Invert check when verifying for operation on register
displacement.
Sergio Durigan Junior [Thu, 16 May 2019 20:11:20 +0000 (16:11 -0400)]
Update some comments on stap-probe.c
Some functions's comments were not entirely correct on stap-probe.c,
so this patch updates them.
Pushed as obvious.
gdb/ChangeLog:
2019-05-16 Sergio Durigan Junior <sergiodj@redhat.com>
* stap-probe.c (stap_get_opcode): Update comment.
(stap_get_expected_argument_type): Likewise.
(handle_stap_probe): Likewise.
Sergio Durigan Junior [Thu, 16 May 2019 19:58:55 +0000 (15:58 -0400)]
Bool-ify stap-probe.c and stap-related code on i386-tdep.c
This simple patch converts a bunch of "int"s to "bool" on stap-probe.c
and on the stap-related code present on i386-tdep.c.
Pushed as obvious (+ I'm the maintainer of this code).
gdb/ChangeLog:
2019-05-16 Sergio Durigan Junior <sergiodj@redhat.com>
* i386-tdep.c (i386_stap_parse_special_token_triplet): Change
return type to 'bool'. Adjust comment. Use 'bool' when
appropriate.
(i386_stap_parse_special_token_three_arg_disp): Likewise.
* stap-probe.c (stap_parse_argument_1): Likewise.
(stap_is_operator): Likewise.
(stap_is_generic_prefix): Likewise.
(stap_is_register_prefix): Likewise.
(stap_is_register_indirection_prefix): Likewise.
(stap_is_integer_prefix): Likewise.
(stap_generic_check_suffix): Likewise.
(stap_check_integer_suffix): Likewise.
(stap_check_register_suffix): Likewise.
(stap_check_register_indirection_suffix): Likewise.
(stap_parse_register_operand): Likewise.
(stap_parse_single_operand): Likewise.
(stap_parse_argument_1): Likewise.
(stap_probe::get_argument_count): Likewise.
(stap_is_operator): Likewise.
Tom Tromey [Thu, 16 May 2019 16:45:57 +0000 (10:45 -0600)]
Fix darwin-nat.c build
John Marshall pointed out that darwin-nat.c fails to build:
CXX darwin-nat.o
../../../binutils-gdb/gdb/darwin-nat.c:1709:8: error: must use 'class' tag to refer to type 'thread_info' in this scope
for (thread_info *it : all_threads ())
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.14.sdk/usr/include/mach/thread_act.h:240:15: note:
class 'thread_info' is hidden by a non-type declaration of 'thread_info' here
kern_return_t thread_info
Mach has a thread_info() function declared in that header, which darwin-nat.c #includes.
This patch fixes the problem by reintroducing the struct keyword.
gdb/ChangeLog
2019-05-16 Tom Tromey <tromey@adacore.com>
* darwin-nat.c (thread_info_from_private_thread_info): Add struct
keyword to foreach.
Andre Vieira [Thu, 16 May 2019 15:10:22 +0000 (16:10 +0100)]
[PATCH, GAS, Arm] Refactor check_simd_pred_availability
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (check_simd_pred_availability): Refactor.
(do_neon_dyadic_i_su): Refactor use of check_simd_pred_availability.
(do_neon_dyadic_i64_su): Likewise.
(do_neon_shl): Likewise.
(do_neon_qshl): Likewise.
(do_neon_rshl): Likewise.
(do_neon_logic): Likewise.
(do_neon_dyadic_if_su): Likewise.
(do_neon_addsub_if_i): Likewise.
(do_neon_mac_maybe_scalar): Likewise.
(do_neon_fmac): Likewise.
(do_neon_mul): Likewise.
(do_neon_qdmulh): Likewise.
(do_neon_qrdmlah): Likewise.
(do_neon_abs_neg): Likewise.
(do_neon_sli): Likewise.
(do_neon_sri): Likewise.
(do_neon_qshlu_imm): Likewise.
(do_neon_cvt_1): Likewise.
(do_neon_cvttb_1): Likewise.
(do_neon_mvn): Likewise.
(do_neon_rev): Likewise.
(do_neon_dup): Likewise.
(do_neon_mov): Likewise.
(do_neon_rshift_round_imm): Likewise.
(do_neon_sat_abs_neg): Likewise.
(do_neon_cls): Likewise.
(do_neon_clz): Likewise.
(do_vmaxnm): Likewise.
(do_vrint_1): Likewise.
(do_vcmla): Likewise.
(do_vcadd): Likewise.
Andre Vieira [Thu, 16 May 2019 15:08:36 +0000 (16:08 +0100)]
[PATCH, binutils, Arm] Add Armv8.1-M Mainline and MVE enablement to NEWS
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* NEWS: Mention Armv8.1-M Mainline and MVE.
binutils/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* NEWS: Mention Armv8.1-M Mainline and MVE.
Andre Vieira [Thu, 16 May 2019 15:06:29 +0000 (16:06 +0100)]
[PATCH 57/57][Arm][GAS] MVE Tests
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* testsuite/gas/arm/mve-tailpredloop.d: New test.
* testsuite/gas/arm/mve-tailpredloop.s: New test.
* testsuite/gas/arm/mve-vabav.d: New test.
* testsuite/gas/arm/mve-vabav.s: New test.
* testsuite/gas/arm/mve-vabd.d: New test.
* testsuite/gas/arm/mve-vabd.s: New test.
* testsuite/gas/arm/mve-vabsneg.d: New test.
* testsuite/gas/arm/mve-vabsneg.s: New test.
* testsuite/gas/arm/mve-vadc.d: New test.
* testsuite/gas/arm/mve-vadc.s: New test.
* testsuite/gas/arm/mve-vaddlv.d: New test.
* testsuite/gas/arm/mve-vaddlv.s: New test.
* testsuite/gas/arm/mve-vaddsub.d: New test.
* testsuite/gas/arm/mve-vaddsub.s: New test.
* testsuite/gas/arm/mve-vaddv.d: New test.
* testsuite/gas/arm/mve-vaddv.s: New test.
* testsuite/gas/arm/mve-vand.d: New test.
* testsuite/gas/arm/mve-vand.s: New test.
* testsuite/gas/arm/mve-vbic.d: New test.
* testsuite/gas/arm/mve-vbic.s: New test.
* testsuite/gas/arm/mve-vbrsr.d: New test.
* testsuite/gas/arm/mve-vbrsr.s: New test.
* testsuite/gas/arm/mve-vcadd.d: New test.
* testsuite/gas/arm/mve-vcadd.s: New test.
* testsuite/gas/arm/mve-vcls.d: New test.
* testsuite/gas/arm/mve-vcls.s: New test.
* testsuite/gas/arm/mve-vclz.d: New test.
* testsuite/gas/arm/mve-vclz.s: New test.
* testsuite/gas/arm/mve-vcmla.d: New test.
* testsuite/gas/arm/mve-vcmla.s: New test.
* testsuite/gas/arm/mve-vcmp.d: New test.
* testsuite/gas/arm/mve-vcmp.s: New test.
* testsuite/gas/arm/mve-vcmul.d: New test.
* testsuite/gas/arm/mve-vcmul.s: New test.
* testsuite/gas/arm/mve-vcvt-1.d: New test.
* testsuite/gas/arm/mve-vcvt-1.s: New test.
* testsuite/gas/arm/mve-vcvt-2.d: New test.
* testsuite/gas/arm/mve-vcvt-2.s: New test.
* testsuite/gas/arm/mve-vcvt-3.d: New test.
* testsuite/gas/arm/mve-vcvt-3.s: New test.
* testsuite/gas/arm/mve-vcvt-4.d: New test.
* testsuite/gas/arm/mve-vcvt-4.s: New test.
* testsuite/gas/arm/mve-vddup.d: New test.
* testsuite/gas/arm/mve-vddup.s: New test.
* testsuite/gas/arm/mve-vdup.d: New test.
* testsuite/gas/arm/mve-vdup.s: New test.
* testsuite/gas/arm/mve-veor.d: New test.
* testsuite/gas/arm/mve-veor.s: New test.
* testsuite/gas/arm/mve-vfma-vfms.d: New test.
* testsuite/gas/arm/mve-vfma-vfms.s: New test.
* testsuite/gas/arm/mve-vfmas.d: New test.
* testsuite/gas/arm/mve-vfmas.s: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.d: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.s: New test.
* testsuite/gas/arm/mve-vhcadd.d: New test.
* testsuite/gas/arm/mve-vhcadd.s: New test.
* testsuite/gas/arm/mve-vmax-vmin.d: New test.
* testsuite/gas/arm/mve-vmax-vmin.s: New test.
* testsuite/gas/arm/mve-vmaxa-vmina.d: New test.
* testsuite/gas/arm/mve-vmaxa-vmina.s: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm.d: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm.s: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma.s: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv.d: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv.s: New test.
* testsuite/gas/arm/mve-vmaxv-vminv.d: New test.
* testsuite/gas/arm/mve-vmaxv-vminv.s: New test.
* testsuite/gas/arm/mve-vmla.d: New test.
* testsuite/gas/arm/mve-vmla.s: New test.
* testsuite/gas/arm/mve-vmladav.d: New test.
* testsuite/gas/arm/mve-vmladav.s: New test.
* testsuite/gas/arm/mve-vmlaldav.d: New test.
* testsuite/gas/arm/mve-vmlaldav.s: New test.
* testsuite/gas/arm/mve-vmlalv.d: New test.
* testsuite/gas/arm/mve-vmlalv.s: New test.
* testsuite/gas/arm/mve-vmlas.d: New test.
* testsuite/gas/arm/mve-vmlas.s: New test.
* testsuite/gas/arm/mve-vmlav.d: New test.
* testsuite/gas/arm/mve-vmlav.s: New test.
* testsuite/gas/arm/mve-vmlsdav.d: New test.
* testsuite/gas/arm/mve-vmlsdav.s: New test.
* testsuite/gas/arm/mve-vmlsldav.d: New test.
* testsuite/gas/arm/mve-vmlsldav.s: New test.
* testsuite/gas/arm/mve-vmov-1.d: New test.
* testsuite/gas/arm/mve-vmov-1.s: New test.
* testsuite/gas/arm/mve-vmov-2.d: New test.
* testsuite/gas/arm/mve-vmov-2.s: New test.
* testsuite/gas/arm/mve-vmul.d: New test.
* testsuite/gas/arm/mve-vmul.s: New test.
* testsuite/gas/arm/mve-vmulh.d: New test.
* testsuite/gas/arm/mve-vmulh.s: New test.
* testsuite/gas/arm/mve-vmullbt.d: New test.
* testsuite/gas/arm/mve-vmullbt.s: New test.
* testsuite/gas/arm/mve-vmvn.d: New test.
* testsuite/gas/arm/mve-vmvn.s: New test.
* testsuite/gas/arm/mve-vorn.d: New test.
* testsuite/gas/arm/mve-vorn.s: New test.
* testsuite/gas/arm/mve-vorr.d: New test.
* testsuite/gas/arm/mve-vorr.s: New test.
* testsuite/gas/arm/mve-vpnot.d: New test.
* testsuite/gas/arm/mve-vpnot.s: New test.
* testsuite/gas/arm/mve-vpsel.d: New test.
* testsuite/gas/arm/mve-vpsel.s: New test.
* testsuite/gas/arm/mve-vpt.d: New test.
* testsuite/gas/arm/mve-vpt.s: New test.
* testsuite/gas/arm/mve-vqabsneg.s: New test.
* testsuite/gas/arm/mve-vqaddsub.d: New test.
* testsuite/gas/arm/mve-vqaddsub.s: New test.
* testsuite/gas/arm/mve-vqdmladh.d: New test.
* testsuite/gas/arm/mve-vqdmladh.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: New test.
* testsuite/gas/arm/mve-vqdmlah.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: New test.
* testsuite/gas/arm/mve-vqdmlash.s: New test.
* testsuite/gas/arm/mve-vqdmlsdh.d: New test.
* testsuite/gas/arm/mve-vqdmlsdh.s: New test.
* testsuite/gas/arm/mve-vqdmulh.d: New test.
* testsuite/gas/arm/mve-vqdmulh.s: New test.
* testsuite/gas/arm/mve-vqdmull.d: New test.
* testsuite/gas/arm/mve-vqdmull.s: New test.
* testsuite/gas/arm/mve-vqmovn.d: New test.
* testsuite/gas/arm/mve-vqmovn.s: New test.
* testsuite/gas/arm/mve-vqrshl.d: New test.
* testsuite/gas/arm/mve-vqrshl.s: New test.
* testsuite/gas/arm/mve-vqrshrn.d: New test.
* testsuite/gas/arm/mve-vqrshrn.s: New test.
* testsuite/gas/arm/mve-vqshl.d: New test.
* testsuite/gas/arm/mve-vqshl.s: New test.
* testsuite/gas/arm/mve-vrev.d: New test.
* testsuite/gas/arm/mve-vrev.s: New test.
* testsuite/gas/arm/mve-vrint.d: New test.
* testsuite/gas/arm/mve-vrint.s: New test.
* testsuite/gas/arm/mve-vrmlaldavh.d: New test.
* testsuite/gas/arm/mve-vrmlaldavh.s: New test.
* testsuite/gas/arm/mve-vrshl.d: New test.
* testsuite/gas/arm/mve-vrshl.s: New test.
* testsuite/gas/arm/mve-vsbc.d: New test.
* testsuite/gas/arm/mve-vsbc.s: New test.
* testsuite/gas/arm/mve-vshl.d: New test.
* testsuite/gas/arm/mve-vshl.s: New test.
* testsuite/gas/arm/mve-vshlc.d: New test.
* testsuite/gas/arm/mve-vshlc.s: New test.
* testsuite/gas/arm/mve-vshll.d: New test.
* testsuite/gas/arm/mve-vshll.s: New test.
* testsuite/gas/arm/mve-vshr.d: New test.
* testsuite/gas/arm/mve-vshr.s: New test.
* testsuite/gas/arm/mve-vshrn.d: New test.
* testsuite/gas/arm/mve-vshrn.s: New test.
* testsuite/gas/arm/mve-vsli.d: New test.
* testsuite/gas/arm/mve-vsli.s: New test.
* testsuite/gas/arm/mve-vsri.d: New test.
* testsuite/gas/arm/mve-vsri.s: New test.
* testsuite/gas/arm/mve-vstld.d: New test.
* testsuite/gas/arm/mve-vstld.s: New test.
* testsuite/gas/arm/mve-vstrldr-1.d: New test.
* testsuite/gas/arm/mve-vstrldr-1.s: New test.
* testsuite/gas/arm/mve-vstrldr-2.d: New test.
* testsuite/gas/arm/mve-vstrldr-2.s: New test.
* testsuite/gas/arm/mve-vstrldr-3.d: New test.
* testsuite/gas/arm/mve-vstrldr-3.s: New test.
Andre Vieira [Thu, 16 May 2019 13:48:34 +0000 (14:48 +0100)]
[PATCH 56/57][Arm][OBJDUMP] Add support for MVE instructions: vpnot, vpsel, vqabs, vqadd, vqsub, vqneg and vrev
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(enum mve_undefined): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_size): Likewise.
Andre Vieira [Thu, 16 May 2019 13:47:12 +0000 (14:47 +0100)]
[PATCH 55/57][Arm][OBJDUMP] Add support for MVE instructions: vmul, vmulh, vrmulh and vneg
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
Andre Vieira [Thu, 16 May 2019 13:45:17 +0000 (14:45 +0100)]
[PATCH 54/57][Arm][OBJDUMP] Add support for MVE instructions: vmax(a), vmax(a)v, vmaxnm(a), vmaxnm(a)v, vmin(a), vmin(a)v, vminnm(a), vminnm(a)v and vmla
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(is_mve_encoding_conflict): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
Andre Vieira [Thu, 16 May 2019 13:44:19 +0000 (14:44 +0100)]
[PATCH 53/57][Arm][OBJDUMP] Add support for MVE instructions: vand, vbrsr, vcls, vclz and vctp
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
Andre Vieira [Thu, 16 May 2019 13:42:53 +0000 (14:42 +0100)]
[PATCH 52/57][Arm][OBJDUMP] Add support for MVE instructions: vadc, vabav, vabd, vabs, vadd, vsbc and vsub
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:41:41 +0000 (14:41 +0100)]
[PATCH 51/57][Arm][OBJDUMP] Add support for MVE instructions: lctp, letp, wlstp and dlstp
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(print_insn_thumb32): Handle new instructions.
Andre Vieira [Thu, 16 May 2019 13:39:12 +0000 (14:39 +0100)]
[PATCH 50/57][Arm][OBJDUMP] Add support for MVE shift instructions
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_undefined): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_size): Likewise.
(print_mve_shift_n): Likewise.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:34:44 +0000 (14:34 +0100)]
[PATCH 49/57][Arm][OBJDUMP] Add support for MVE complex number instructions
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_rotate): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:33:36 +0000 (14:33 +0100)]
[PATCH 48/57][Arm][OBJDUMP] Add support for MVE instructions: vddup, vdwdup, vidup and viwdup
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:32:01 +0000 (14:32 +0100)]
[PATCH 47/57][Arm][OBJDUMP] Add support for MVE instructions: vaddv, vmlaldav, vmladav, vmlas, vrmlsldavh, vmlsldav, vmlsdav, vrmlaldavh, vqdmlah, vqrdmlash, vqrdmlash, vqdmlsdh, vqrdmlsdh, vqdmulh and vqrdmulh
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_undefined): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:30:38 +0000 (14:30 +0100)]
[PATCH 46/57][Arm][OBJDUMP] Add support for MVE instructions: vmovl, vmull, vqdmull, vqmovn, vqmovun and vmovn
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:29:36 +0000 (14:29 +0100)]
[PATCH 45/57][Arm][OBJDUMP] Add support for MVE instructions: vmov, vmvn, vorr, vorn, vmovx and vbic
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(enum mve_undefined): Likewise.
(is_mve_okay_in_it): Handle new isntructions.
(is_mve_encoding_conflict): Likewise.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_vmov_index): Likewise.
(print_simd_imm8): Likewise.
(print_mve_undefined): Likewise.
(print_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:08:17 +0000 (14:08 +0100)]
[PATCH 44/57][Arm][OBJDUMP] Add support for MVE instructions: vcvt and vrint
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(enum mve_undefined): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_unpredictable): Likewise.
(print_mve_rounding_mode): Likewise.
(print_mve_vcvt_size): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:06:46 +0000 (14:06 +0100)]
[PATCH 43/57][Arm][OBJDUMP] Add support for MVE instructions: scatter stores and gather loads
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(enum mve_undefined): Likewise.
(is_mve_undefined): Handle new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:05:38 +0000 (14:05 +0100)]
[PATCH 42/57][Arm][OBJDUMP] Add support for MVE instructions: vldr[bhw] and vstr[bhw]
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_undefined): Add new reasons.
(insns): Add new instructions.
(is_mve_encoding_conflict):
(print_mve_vld_str_addr): New print function.
(is_mve_undefined): Handle new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_size): Likewise.
(print_insn_coprocessor_1): Handle MVE VLDR, VSTR instructions.
(print_insn_mve): Handle new operands.
Andre Vieira [Thu, 16 May 2019 13:04:35 +0000 (14:04 +0100)]
[PATCH 41/57][Arm][OBJDUMP] Add support for MVE instructions: vld[24] and vst[24]
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_unpredictable): Likewise.
(mve_opcodes): Add new instructions.
(print_mve_unpredictable): Handle new reasons.
(print_mve_register_blocks): New print function.
(print_mve_size): Handle new instructions.
(print_insn_mve): Likewise.
Andre Vieira [Thu, 16 May 2019 13:02:05 +0000 (14:02 +0100)]
[PATCH 40/57][Arm][OBJDUMP] Add support for MVE instructions: vdup, veor, vfma, vfms, vhadd, vhsub and vrhadd
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(enum mve_undefined): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(coprocessor_opcodes): Move NEON VDUP from here...
(neon_opcodes): ... to here.
(mve_opcodes): Add new instructions.
(print_mve_undefined): Handle new reasons.
(print_mve_unpredictable): Likewise.
(print_mve_size): Handle new instructions.
(print_insn_neon): Handle vdup.
(print_insn_mve): Handle new operands.
Andre Vieira [Thu, 16 May 2019 12:57:57 +0000 (13:57 +0100)]
[PATCH 39/57][Arm][OBJDUMP] Add support for MVE instructions: vpt, vpst and vcmp
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new values.
(mve_opcodes): Add new instructions.
(vec_condnames): New array with vector conditions.
(mve_predicatenames): New array with predicate suffixes.
(mve_vec_sizename): New array with vector sizes.
(enum vpt_pred_state): New enum with vector predication states.
(struct vpt_block): New struct type for vpt blocks.
(vpt_block_state): Global struct to keep track of state.
(mve_extract_pred_mask): New helper function.
(num_instructions_vpt_block): Likewise.
(mark_outside_vpt_block): Likewise.
(mark_inside_vpt_block): Likewise.
(invert_next_predicate_state): Likewise.
(update_next_predicate_state): Likewise.
(update_vpt_block_state): Likewise.
(is_vpt_instruction): Likewise.
(is_mve_encoding_conflict): Add entries for new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_unpredictable): Handle new cases.
(print_instruction_predicate): Likewise.
(print_mve_size): New function.
(print_vec_condition): New function.
(print_insn_mve): Handle vpt blocks and new print operands.
Andre Vieira [Thu, 16 May 2019 12:55:20 +0000 (13:55 +0100)]
[PATCH 38/57][Arm][OBJDUMP] Disable the use of MVE reserved coproc numbers in coprocessor instructions
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm-dis.c (print_insn_coprocessor_1): Disable the use of coprocessors
8, 14 and 15 for Armv8.1-M Mainline.
Andre Vieira [Thu, 16 May 2019 12:54:24 +0000 (13:54 +0100)]
[PATCH 37/57][Arm][OBJDUMP] Add framework for MVE instructions
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): New enum.
(enum mve_unpredictable): Likewise.
(enum mve_undefined): Likewise.
(struct mopcode32): New struct.
(is_mve_okay_in_it): New function.
(is_mve_architecture): Likewise.
(arm_decode_field): Likewise.
(arm_decode_field_multiple): Likewise.
(is_mve_encoding_conflict): Likewise.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_unpredictable): Likewise.
(print_insn_coprocessor_1): Use arm_decode_field_multiple.
(print_insn_mve): New function.
(print_insn_thumb32): Handle MVE architecture.
(select_arm_features): Force thumb for Armv8.1-m Mainline.
Andre Vieira [Thu, 16 May 2019 12:52:51 +0000 (13:52 +0100)]
[PATCH 36/57][Arm][GAS] Add support for MVE instructions: wlstp, dlstp, letp and lctp
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): Add new instructions.
(do_t_loloop): Changed to handle tail predication variants.
(md_apply_fix): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-tailpredloop-bad.d: New test.
* testsuite/gas/arm/mve-tailpredloop-bad.l: New test.
* testsuite/gas/arm/mve-tailpredloop-bad.s: New test.
* testsuite/gas/arm/mve-tailpredloop.d: New test.
Andre Vieira [Thu, 16 May 2019 12:44:14 +0000 (13:44 +0100)]
[PATCH 35/57][Arm][GAS] Add support for MVE instructions: vshlc and vshll
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vshll): New encoding function.
(do_mve_vshlc): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vshlc-bad.d: New test.
* testsuite/gas/arm/mve-vshlc-bad.l: New test.
* testsuite/gas/arm/mve-vshlc-bad.s: New test.
* testsuite/gas/arm/mve-vshll-bad.d: New test.
* testsuite/gas/arm/mve-vshll-bad.l: New test.
* testsuite/gas/arm/mve-vshll-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 11:17:44 +0000 (12:17 +0100)]
[PATCH 34/57][Arm][GAS] Add support for MVE instructions: vshl and vqshl
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(do_neon_shl_imm): Accept MVE variants.
(do_neon_shl): Likewise.
(do_neon_qshl_imm): Likewise.
(do_neon_qshl): Likewise.
(do_neon_qshlu_imm): Likewise.
(insns): Likewise.
* testsuite/gas/arm/mve-vqshl-bad.d: New test.
* testsuite/gas/arm/mve-vqshl-bad.l: New test.
* testsuite/gas/arm/mve-vqshl-bad.s: New test.
* testsuite/gas/arm/mve-vshl-bad.d: New test.
* testsuite/gas/arm/mve-vshl-bad.l: New test.
* testsuite/gas/arm/mve-vshl-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 11:08:38 +0000 (12:08 +0100)]
[PATCH 33/57][Arm][GAS] Add support for MVE instructions: vshr, vrshr, vsli, vsri, vrev16, vrev32 and vrev64
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_sli): Accept MVE variants.
(do_neon_sri): Likewise.
(do_neon_rev): Likewise.
(do_neon_rshift_round_imm): Likewise.
(insns): Likewise.
* testsuite/gas/arm/mve-vrev-bad.d: New test.
* testsuite/gas/arm/mve-vrev-bad.l: New test.
* testsuite/gas/arm/mve-vrev-bad.s: New test.
* testsuite/gas/arm/mve-vshr-bad.d: New test.
* testsuite/gas/arm/mve-vshr-bad.l: New test.
* testsuite/gas/arm/mve-vshr-bad.s: New test.
* testsuite/gas/arm/mve-vsli-bad.d: New test.
* testsuite/gas/arm/mve-vsli-bad.l: New test.
* testsuite/gas/arm/mve-vsli-bad.s: New test.
* testsuite/gas/arm/mve-vsri-bad.d: New test.
* testsuite/gas/arm/mve-vsri-bad.l: New test.
* testsuite/gas/arm/mve-vsri-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 11:07:22 +0000 (12:07 +0100)]
[PATCH 32/57][Arm][GAS] Add support for MVE instructions: vrintn, vrintx, vrinta, vrintz, vrintm and vrintp
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_vrint_1): Accept MVE variants.
(insns): Change entries to accept MVE variants.
* testsuite/gas/arm/mve-vrint-bad.d: New test.
* testsuite/gas/arm/mve-vrint-bad.l: New test.
* testsuite/gas/arm/mve-vrint-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 11:05:34 +0000 (12:05 +0100)]
[PATCH 31/57][Arm][GAS] Add support for MVE instructions: vshrn[tb], vrshrn[tb], vqshrn[tb], vqshrun[tb], vqrshrn[tb] and vqrshrun[tb]
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vshrnt, M_MNEM_vshrnb, M_MNEM_vrshrnt,
M_MNEM_vqshrnt, M_MNEM_vqshrnb, M_MNEM_vqshrunt, M_MNEM_vqshrunb,
M_MNEM_vrshrnb, M_MNEM_vqrshrnt, M_MNEM_vqrshrnb, M_MNEM_vqrshrunt,
M_MNEM_vqrshrunb): New instruction encodings.
(do_mve_vshrn): New encoding function.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vqrshrn-bad.d: New test.
* testsuite/gas/arm/mve-vqrshrn-bad.l: New test.
* testsuite/gas/arm/mve-vqrshrn-bad.s: New test.
* testsuite/gas/arm/mve-vshrn-bad.d: New test.
* testsuite/gas/arm/mve-vshrn-bad.l: New test.
* testsuite/gas/arm/mve-vshrn-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 11:04:35 +0000 (12:04 +0100)]
[PATCH 30/57][Arm][GAS] Add support for MVE instructions: vqmovnt, vqmovnb, vqmovunt, vqmovunb, vqrshl and vrshl
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vqmovnt, M_MNEM_vqmovnb,
M_MNEM_vqmovunt, M_MNEM_vqmovunb): New instruction encodings.
(do_mve_vqmovn): New encoding function.
(do_neon_rshl): Change to accepte MVE variants.
(insns): Change entries and add new for MVE mnemonics.
* testsuite/gas/arm/mve-vqmovn-bad.d: New test.
* testsuite/gas/arm/mve-vqmovn-bad.l: New test.
* testsuite/gas/arm/mve-vqmovn-bad.s: New test.
* testsuite/gas/arm/mve-vqrshl-bad.d: New test.
* testsuite/gas/arm/mve-vqrshl-bad.l: New test.
* testsuite/gas/arm/mve-vqrshl-bad.s: New test.
* testsuite/gas/arm/mve-vrshl-bad.d: New test.
* testsuite/gas/arm/mve-vrshl-bad.l: New test.
* testsuite/gas/arm/mve-vrshl-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 11:03:30 +0000 (12:03 +0100)]
[PATCH 29/57][Arm][GAS] Add support for MVE instructions: vqdmullt and vqdmullb
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(do_mve_vqdmull): New encoding function.
(insns): Add entry for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmull-bad.d: New test.
* testsuite/gas/arm/mve-vqdmull-bad.l: New test.
* testsuite/gas/arm/mve-vqdmull-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 11:00:54 +0000 (12:00 +0100)]
[PATCH 28/57][Arm][GAS] Add support for MVE instructions: vqdmlah, vqrdmlah, vqdmlash, vqrdmlash, vqdmulh and vqrdmulh
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Handle new instructions.
(do_neon_qdmulh): Add support for MVE variants.
(do_neon_qrdmlah): Likewise.
(do_mve_vqdmlah): New encoding function.
(insns): Change entries and add new entries for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmulh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmulh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmulh-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:59:36 +0000 (11:59 +0100)]
[PATCH 27/57][Arm][GAS] Add support for MVE instructions: vqdmladh, vqrdmladh, vqdmlsdh and vqrdmlsdh
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vqdmladh): New encoding function.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmladh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmladh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmladh-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:57:44 +0000 (11:57 +0100)]
[PATCH 26/57][Arm][GAS] Add support for MVE instructions: vpnot and vpsel
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vpsel): New encoding function.
(do_mve_vpnot): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vpnot-bad.d: New test.
* testsuite/gas/arm/mve-vpnot-bad.l: New test.
* testsuite/gas/arm/mve-vpnot-bad.s: New test.
* testsuite/gas/arm/mve-vpsel-bad.d: New test.
* testsuite/gas/arm/mve-vpsel-bad.l: New test.
* testsuite/gas/arm/mve-vpsel-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:52:29 +0000 (11:52 +0100)]
[PATCH 25/57][Arm][GAS] Add support for MVE instruction: vmvn, vqabs and vqneg
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_mvn): Change to accept MVE variants.
(do_neon_sat_abs_neg): Likewise.
(insns): Likewise.
* testsuite/gas/arm/mve-vmvn-bad.d: New test.
* testsuite/gas/arm/mve-vmvn-bad.l: New test.
* testsuite/gas/arm/mve-vmvn-bad.s: New test.
* testsuite/gas/arm/mve-vqabsneg-bad.d: New test.
* testsuite/gas/arm/mve-vqabsneg-bad.l: New test.
* testsuite/gas/arm/mve-vqabsneg-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:49:02 +0000 (11:49 +0100)]
[PATCH 24/57][Arm][GAS] Add support for MVE instructions: vmlas, vmulh and vrmulh
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmlas): New encoding function.
(do_mve_vmulh): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vmlas-bad.d: New test.
* testsuite/gas/arm/mve-vmlas-bad.l: New test.
* testsuite/gas/arm/mve-vmlas-bad.s: New test.
* testsuite/gas/arm/mve-vmulh-bad.d: New test.
* testsuite/gas/arm/mve-vmulh-bad.l: New test.
* testsuite/gas/arm/mve-vmulh-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:46:48 +0000 (11:46 +0100)]
[PATCH 23/57][Arm][GAS] Add support for MVE instructions: vmla, vmul, vqadd and vqsub
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Handle new instructions.
(do_neon_dyadic_i64_su): Accept MVE variants.
(neon_dyadic_misc): Likewise.
(do_neon_mac_maybe_scalar): Likewise.
(do_neon_mul): Likewise.
(insns): Change to accept MVE variants.
* testsuite/gas/arm/mve-vmla-bad.d: New test.
* testsuite/gas/arm/mve-vmla-bad.l: New test.
* testsuite/gas/arm/mve-vmla-bad.s: New test.
* testsuite/gas/arm/mve-vmul-bad-1.d: New test.
* testsuite/gas/arm/mve-vmul-bad-1.l: New test.
* testsuite/gas/arm/mve-vmul-bad-1.s: New test.
* testsuite/gas/arm/mve-vmul-bad-2.d: New test.
* testsuite/gas/arm/mve-vmul-bad-2.l: New test.
* testsuite/gas/arm/mve-vmul-bad-2.s: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.d: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.l: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:45:46 +0000 (11:45 +0100)]
[PATCH 22/57][Arm][GAS] Add support for MVE instructions: vmlaldav, vmlalv, vmlsldav, vrmlaldavh, vrmlalvh and vrmlsldavh
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vmlaldav, M_MNEM_vmlaldava,
M_MNEM_vmlaldavx, M_MNEM_vmlaldavax, M_MNEM_vmlsldav,
M_MNEM_vmlsldava, M_MNEM_vmlsldavx, M_MNEM_vmlsldavax,
M_MNEM_vrmlaldavhx, M_MNEM_vrmlaldavhax, M_MNEM_vrmlsldavh,
M_MNEM_vrmlsldavha, M_MNEM_vrmlsldavhx, M_MNEM_vrmlsldavhax): New
instruction encodings.
(NEON_SHAPE_DEF): New shape
(mve_encode_rrqq): New encoding helper function.
(do_mve_vmlaldav): New encoding function.
(do_mve_vrmlaldavh): New encoding function.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vmlaldav-bad.d: New test.
* testsuite/gas/arm/mve-vmlaldav-bad.l: New test.
* testsuite/gas/arm/mve-vmlaldav-bad.s: New test.
* testsuite/gas/arm/mve-vmlalv-bad.d: New test.
* testsuite/gas/arm/mve-vmlalv-bad.l: New test.
* testsuite/gas/arm/mve-vmlalv-bad.s: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.d: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.l: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.s: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.d: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.l: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:44:19 +0000 (11:44 +0100)]
[PATCH 21/57][Arm][GAS] Add support for MVE instructions: vmaxv, vmaxav, vminv and vminav
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vmaxv, M_MNEM_vmaxav, M_MNEM_vminv,
M_MNEM_vminav): New instruction encodings.
(do_mve_vmaxv): New encoding function.
(insns): Add entries for new MVE mnemonics.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.d: New test.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.l: New test.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:42:52 +0000 (11:42 +0100)]
[PATCH 20/57][Arm][GAS] Add support for MVE instructions: vmaxnmv, vmaxnmav, vminnmv and vminnmav
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmaxnmv): New encoding function.
(insns): Add entries for new mnemonics.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:41:52 +0000 (11:41 +0100)]
[PATCH 19/57][Arm][GAS] Add support for MVE instructions: vmax[nm][a] and vmin[nm][a]
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmaxa_vmina): New encoding function.
(do_mve_vmaxnma_vminnma): Likewise.
(do_neon_dyadic_if_su): Change to support MVE variants.
(do_vmaxnm): Likewise.
(insns): Change to accept MVE variants and add new.
* testsuite/gas/arm/mve-vmax-vmin-bad.d: New test.
* testsuite/gas/arm/mve-vmax-vmin-bad.l: New test.
* testsuite/gas/arm/mve-vmax-vmin-bad.s: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.d: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.l: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.s: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.s: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:40:26 +0000 (11:40 +0100)]
[PATCH 18/57][Arm][GAS] Add support for MVE instructions: vhcadd, vhadd, vhsub and vrhadd
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Change to support new instructions.
(enum vfp_or_neon_is_neon_bits): Moved.
(vfp_or_neon_is_neon): Moved.
(check_simd_pred_availability): Moved.
(do_neon_dyadic_i_su): Changed to support MVE variants.
(neon_dyadic_misc): Changed mve_encode_qqr call.
(do_mve_vbrsr): Likewise.
(do_mve_vhcadd): New encoding function.
(insns): Change existing to accept MVE variants and add new.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.d: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.l: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.s: New test.
* testsuite/gas/arm/mve-vhcadd-bad.d: New test.
* testsuite/gas/arm/mve-vhcadd-bad.l: New test.
* testsuite/gas/arm/mve-vhcadd-bad.s: New test.
Andre Vieira [Thu, 16 May 2019 10:39:24 +0000 (11:39 +0100)]
[PATCH 17/57][Arm][GAS] Add support for MVE instructions: vfma and vfms
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_fmac): Change to support MVE variants.
(insns): Change to accept MVE variants.
* testsuite/gas/arm/mve-vfma-vfms-bad.d: New test.
* testsuite/gas/arm/mve-vfma-vfms-bad.l: New test.
* testsuite/gas/arm/mve-vfma-vfms-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 17:36:48 +0000 (18:36 +0100)]
[PATCH 16/57][Arm][GAS] Add support for MVE instructions: vdup, vddup, vdwdup, vidup and viwdup
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vddup, M_MNEM_vdwdup, M_MNEM_vidup,
M_MNEM_viwdup): New instruction encodings.
(NEON_SHAPE_DEF): New shapes.
(do_mve_viddup): New encoding function.
(do_neon_dup): Change to support new MVE variants.
(insns): Change existing to accept MVE variants and add new.
* testsuite/gas/arm/mve-vddup-bad.d: New test.
* testsuite/gas/arm/mve-vddup-bad.l: New test.
* testsuite/gas/arm/mve-vddup-bad.s: New test.
* testsuite/gas/arm/mve-vdup-bad.d: New test.
* testsuite/gas/arm/mve-vdup-bad.l: New test.
* testsuite/gas/arm/mve-vdup-bad.s: New test.
* testsuite/gas/arm/mve-vidup-bad.d: New test.
* testsuite/gas/arm/mve-vidup-bad.l: New test.
* testsuite/gas/arm/mve-vidup-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 17:31:38 +0000 (18:31 +0100)]
[PATCH 15/57][Arm][GAS] Add support for MVE instructions: vcls, vclz and vfmas
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vfmas): New encoding function.
(do_neon_cls): Change to support MVE variants.
(do_neon_clz): Change to support MVE variants.
(insns): Change to support MVE variants and add new.
* testsuite/gas/arm/mve-vcls-bad.d: New test.
* testsuite/gas/arm/mve-vcls-bad.l: New test.
* testsuite/gas/arm/mve-vcls-bad.s: New test.
* testsuite/gas/arm/mve-vclz-bad.d: New test.
* testsuite/gas/arm/mve-vclz-bad.l: New test.
* testsuite/gas/arm/mve-vclz-bad.s: New test.
* testsuite/gas/arm/mve-vfmas-bad.d: New test.
* testsuite/gas/arm/mve-vfmas-bad.l: New test.
* testsuite/gas/arm/mve-vfmas-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 17:21:32 +0000 (18:21 +0100)]
[PATCH 14/57][Arm][GAS] Add support for MVE instructions: vcadd, vcmla and vcmul
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operands.
(parse_operands): Handle new operands.
(do_mve_vcmul): New encoding function.
(do_vcmla): Change to support MVE variants.
(do_vcadd): Change to support MVE variants.
(insns): Change existing to support MVE variants and add new.
* testsuite/gas/arm/mve-vcadd-bad-1.d: New test.
* testsuite/gas/arm/mve-vcadd-bad-1.l: New test.
* testsuite/gas/arm/mve-vcadd-bad-1.s: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.d: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.l: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.s: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.s: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.s: New test.
Andre Vieira [Wed, 15 May 2019 16:40:06 +0000 (17:40 +0100)]
[PATCH 13/57][Arm][GAS] Add support for MVE instructions: vand, vbic, vorr, vorn and veor
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operands.
(parse_operands): Handle new operands.
(enum vfp_or_neon_is_neon_bits): Moved
(vfp_or_neon_is_neon): Moved
(check_simd_pred_availability): Moved.
(do_neon_logic): Change to accept MVE variants.
(insns): Changed to accept MVE variants.
* testsuite/gas/arm/mve-vand-bad.d: New test.
* testsuite/gas/arm/mve-vand-bad.l: New test.
* testsuite/gas/arm/mve-vand-bad.s: New test.
* testsuite/gas/arm/mve-vbic-bad.d: New test.
* testsuite/gas/arm/mve-vbic-bad.l: New test.
* testsuite/gas/arm/mve-vbic-bad.s: New test.
* testsuite/gas/arm/mve-veor-bad.d: New test.
* testsuite/gas/arm/mve-veor-bad.l: New test.
* testsuite/gas/arm/mve-veor-bad.s: New test.
* testsuite/gas/arm/mve-vorn-bad.d: New test.
* testsuite/gas/arm/mve-vorn-bad.l: New test.
* testsuite/gas/arm/mve-vorn-bad.s: New test.
* testsuite/gas/arm/mve-vorr-bad.d: New test.
* testsuite/gas/arm/mve-vorr-bad.l: New test.
* testsuite/gas/arm/mve-vorr-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 16:38:12 +0000 (17:38 +0100)]
[PATCH 12/57][Arm][GAS] Add support for MVE instructions: vaddlv and vaddv
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vaddlv, M_MNEM_vaddlva, M_MNEM_vaddv,
M_MNEM_vaddva): New instruction encodings.
(mve_encode_rq): New encoding helper function.
(do_mve_vaddlv): New encoding function.
(do_mve_vaddv): New encoding function.
* testsuite/gas/arm/mve-vaddlv-bad.d: New test.
* testsuite/gas/arm/mve-vaddlv-bad.l: New test.
* testsuite/gas/arm/mve-vaddlv-bad.s: New test.
* testsuite/gas/arm/mve-vaddv-bad.d: New test.
* testsuite/gas/arm/mve-vaddv-bad.l: New test.
* testsuite/gas/arm/mve-vaddv-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 16:37:07 +0000 (17:37 +0100)]
[PATCH 11/57][Arm][GAS] Add support for MVE instructions: vadc, vsbc and vbrsr
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vadc, M_MNEM_vadci, M_MNEM_vbrsr):
New instruction encodings.
(do_mve_vadc): New encoding instruction.
(do_mve_vbrsr): Likewise.
(do_mve_vsbc): Likewise.
* testsuite/gas/arm/mve-vadc-bad.d: New test.
* testsuite/gas/arm/mve-vadc-bad.l: New test.
* testsuite/gas/arm/mve-vadc-bad.s: New test.
* testsuite/gas/arm/mve-vbrsr-bad.d: New test.
* testsuite/gas/arm/mve-vbrsr-bad.l: New test.
* testsuite/gas/arm/mve-vbrsr-bad.s: New test.
* testsuite/gas/arm/mve-vsbc-bad.d: New test.
* testsuite/gas/arm/mve-vsbc-bad.l: New test.
* testsuite/gas/arm/mve-vsbc-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 16:35:43 +0000 (17:35 +0100)]
[PATCH 10/57][Arm][GAS] Add support for MVE instructions: vcmp and vpt
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (MVE_BAD_QREG): New error message.
(enum operand_parse_code): Define new operand.
(parse_operands): Handle new operand.
(do_mve_vpt): Change for VPT blocks.
(NEON_SHAPE_DEF): New shape.
(neon_logbits): Moved.
(LOW4): Moved
(HI1): Moved
(mve_get_vcmp_vpt_cond): New function to translate vpt conditions.
(do_mve_vcmp): New encoding function.
(do_vfp_nsyn_cmp): Changed to support MVE variants.
(insns): Change to support MVE variants of vcmp and add vpt.
* testsuite/gas/arm/mve-vcmp-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmp-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmp-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmp-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmp-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmp-bad-2.s: New test.
* testsuite/gas/arm/mve-vpt-bad-1.d: New test.
* testsuite/gas/arm/mve-vpt-bad-1.l: New test.
* testsuite/gas/arm/mve-vpt-bad-1.s: New test.
* testsuite/gas/arm/mve-vpt-bad-2.d: New test.
* testsuite/gas/arm/mve-vpt-bad-2.l: New test.
* testsuite/gas/arm/mve-vpt-bad-2.s: New test.
Andre Vieira [Wed, 15 May 2019 16:31:25 +0000 (17:31 +0100)]
[PATCH 9/57][Arm][GAS] Add support for MVE instructions: vmov
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (struct arm_it): Expand isscalar field to be able to
distinguish between types of scalar.
(parse_typed_reg_or_scalar): Change to accept MVE scalar variants.
(parse_scalar): Likewise.
(parse_neon_mov): Accept MVE variant.
(po_scalar_or_goto): Make use reg_type.
(parse_operands): Change uses of po_scalar_or_goto.
(do_vfp_sp_monadic): Change to accept MVE variants.
(do_vfp_reg_from_sp): Likewise.
(do_vfp_sp_from_reg): Likewise.
(do_vfp_dp_rd_rm): Likewise.
(do_vfp_dp_rd_rn_rm): Likewise.
(do_vfp_dp_rm_rd_rn): Likewise.
(M_MNEM_vmovlt, M_MNEM_vmovlb, M_MNEM_vmovnt, M_MNEM_vmovnb): New
instruction encodings.
(NEON_SHAPE_DEF): New shape.
(do_mve_mov): New encoding fuction.
(do_mve_movn): Likewise.
(do_mve_movl): Likewise.
(do_neon_mov): Change to accept MVE variants.
(mcCE): New MACRO.
(insns): Accept new MVE variants and instructions.
* testsuite/gas/arm/mve-vmov-bad-1.d: New test.
* testsuite/gas/arm/mve-vmov-bad-1.l: New test.
* testsuite/gas/arm/mve-vmov-bad-1.s: New test.
* testsuite/gas/arm/mve-vmov-bad-2.d: New test.
* testsuite/gas/arm/mve-vmov-bad-2.l: New test.
* testsuite/gas/arm/mve-vmov-bad-2.s: New test.
Andre Vieira [Wed, 15 May 2019 16:21:53 +0000 (17:21 +0100)]
[PATCH 8/57][Arm][GAS] Add support for MVE instructions: vcvt
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(do_neon_cvt_1): Handle MVE variants.
(do_neon_cvttb_1): Likewise.
(insns): Accept MVE variants.
* testsuite/gas/arm/mve-vcvt-bad-1.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-1.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-1.s: New test.
* testsuite/gas/arm/mve-vcvt-bad-2.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-2.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-2.s: New test.
* testsuite/gas/arm/mve-vcvt-bad-3.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-3.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-3.s: New test.
* testsuite/gas/arm/mve-vcvt-bad-4.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-4.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-4.s: New test.
* testsuite/gas/arm/mve-vcvt-bad.d: New test.
* testsuite/gas/arm/mve-vcvt-bad.l: New test.
* testsuite/gas/arm/mve-vcvt-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 16:20:46 +0000 (17:20 +0100)]
[PATCH 7/57][Arm][GAS] Add support for MVE instructions: vstr/vldr
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (struct arm_it): Make immisreg field larger to hold
type of register.
(enum shift_kind): Add SHIFT_UXTW shift kind.
(enum parse_shift_mode): Add SHIFT_UXTW_IMMEDIATE shift mode.
(parse_shift): Handle new shift type.
(parse_address_main): Accept new addressing modes.
(M_MNEM_vstrb, M_MNEM_vstrh, M_MNEM_vstrw, M_MNEM_vstrd,
M_MNEM_vldrb, M_MNEM_vldrh, M_MNEM_vldrw, M_MNEM_vldrd): New
instruction encodings.
(do_mve_vstr_vldr_QI): New encoding functions.
(do_mve_vstr_vldr_RQ): Likewise.
(do_mve_vstr_vldr_RI): Likewise.
(do_mve_vstr_vldr): Likewise.
* testsuite/gas/arm/mve-vldr-bad-1.d: New test.
* testsuite/gas/arm/mve-vldr-bad-1.l: New test.
* testsuite/gas/arm/mve-vldr-bad-1.s: New test.
* testsuite/gas/arm/mve-vldr-bad-2.d: New test.
* testsuite/gas/arm/mve-vldr-bad-2.l: New test.
* testsuite/gas/arm/mve-vldr-bad-2.s: New test.
* testsuite/gas/arm/mve-vldr-bad-3.d: New test.
* testsuite/gas/arm/mve-vldr-bad-3.l: New test.
* testsuite/gas/arm/mve-vldr-bad-3.s: New test.
* testsuite/gas/arm/mve-vstr-bad-1.d: New test.
* testsuite/gas/arm/mve-vstr-bad-1.l: New test.
* testsuite/gas/arm/mve-vstr-bad-1.s: New test.
* testsuite/gas/arm/mve-vstr-bad-2.d: New test.
* testsuite/gas/arm/mve-vstr-bad-2.l: New test.
* testsuite/gas/arm/mve-vstr-bad-2.s: New test.
* testsuite/gas/arm/mve-vstr-bad-3.d: New test.
* testsuite/gas/arm/mve-vstr-bad-3.l: New test.
* testsuite/gas/arm/mve-vstr-bad-3.s: New test.
Andre Vieira [Wed, 15 May 2019 16:05:58 +0000 (17:05 +0100)]
[PATCH 6/57][Arm][GAS] Add support for MVE instructions: vst/vld{2,4}
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum it_instruction_type): Add MVE_UNPREDICABLE_INSN.
(BAD_EL_TYPE): New error message.
(parse_neon_el_struct_list): Adapt to be able to accept MVE variant.
(parse_address_main): Likewise.
(group_reloc_type): Add GROUP_MVE.
(enum operand_parse_code): Add new operands.
(parse_operands): Handle new operands.
(M_MNEM_vst20, M_MNEM_vst21, M_MNEM_vst40, M_MNEM_vst41, M_MNEM_vst42,
M_MNEM_vst43, M_MNEM_vld20, M_MNEM_vld21, M_MNEM_vld40, M_MNEM_vld41,
M_MNEM_vld42, M_MNEM_vld43): New encodings.
(do_mve_vst_vld): New encoding function.
(do_neon_ld_st_interleave): Use BAD_EL_TYPE.
(it_fsm_pre_encode): Handle new it_instruction_type
(handle_pred_state): Likewise.
* testsuite/gas/arm/mve-vstld-bad.d: New test.
* testsuite/gas/arm/mve-vstld-bad.l: New test.
* testsuite/gas/arm/mve-vstld-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 15:56:30 +0000 (16:56 +0100)]
[PATCH 5/57][Arm][GAS] Add support for MVE instructions: vmull{b,t}
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (BAD_MVE_AUTO): New error message.
(BAD_MVE_SRCDEST): Likewise.
(mark_feature_used): Diagnose MVE only instructions when in
auto-detection mode or -march=all.
(enum operand_parse_code): Define new operand.
(parse_operands): Handle new operand.
(M_MNEM_vmullt, M_MNEM_vmullb): New encodings.
(mve_encode_qqq): New encoding helper function.
(do_mve_vmull): New encoding function.
(insns): Handle new instructions.
* testsuite/gas/arm/mve-vmullbt-bad.d: New test.
* testsuite/gas/arm/mve-vmullbt-bad.l: New test.
* testsuite/gas/arm/mve-vmullbt-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 15:54:23 +0000 (16:54 +0100)]
[PATCH 4/57][Arm][GAS] Add support for MVE instructions: vabav, vmladav and vmlsdav
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (struct asm_opcode): Make avalue a full int.
(BAD_ODD, BAD_EVEN, BAD_SIMD_TYPE): New errors.
(enum operand_parse_code): Handle new operands.
(parse_operands): Likewise.
(M_MNEM_vabav, M_MNEM_vmladav, M_MNEM_vmladava, M_MNEM_vmladavx,
M_MNEM_vmladavax, M_MNEM_vmlsdav, M_MNEM_vmlsdava, M_MNEM_vmlsdavx,
M_MNEM_vmlsdavax): Define new encodings.
(NEON_SHAPE_DEF): Add new shape.
(neon_check_type): Use BAD_SIMD_TYPE.
(mve_encode_rqq): New encoding helper function.
(do_mve_vabav, do_mve_vmladav): New encoding functions.
(mCEF): New MACRO.
* testsuite/gas/arm/mve-vabav-bad.d: New test.
* testsuite/gas/arm/mve-vabav-bad.l: New test.
* testsuite/gas/arm/mve-vabav-bad.s: New test.
* testsuite/gas/arm/mve-vmladav-bad.d: New test.
* testsuite/gas/arm/mve-vmladav-bad.l: New test.
* testsuite/gas/arm/mve-vmladav-bad.s: New test.
* testsuite/gas/arm/mve-vmlav-bad.d: New test.
* testsuite/gas/arm/mve-vmlav-bad.l: New test.
* testsuite/gas/arm/mve-vmlav-bad.s: New test.
* testsuite/gas/arm/mve-vmlsdav-bad.d: New test.
* testsuite/gas/arm/mve-vmlsdav-bad.l: New test.
* testsuite/gas/arm/mve-vmlsdav-bad.s: New test.
Andre Vieira [Wed, 15 May 2019 15:52:50 +0000 (16:52 +0100)]
[PATCH 3/57][Arm][GAS] Add support for MVE instructions: vabs and vneg
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_abs_neg): Make it accept MVE variant.
(insns): Change vabs and vneg entries to accept MVE variants.
* testsuite/gas/arm/mve-vabsneg-bad-1.d: New test.
* testsuite/gas/arm/mve-vabsneg-bad-1.l: New test.
* testsuite/gas/arm/mve-vabsneg-bad-1.s: New test.
* testsuite/gas/arm/mve-vabsneg-bad-2.d: New test.
* testsuite/gas/arm/mve-vabsneg-bad-2.l: New test.
* testsuite/gas/arm/mve-vabsneg-bad-2.s: New test.
Andre Vieira [Wed, 15 May 2019 15:50:58 +0000 (16:50 +0100)]
[PATCH 2/57][Arm][GAS] Add support for MVE instructions: vpst, vadd, vsub and vabd
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum it_instruction_type): Rename to...
(enum pred_instruction_type): ... this. Include VPT types.
(it_insn_type): Rename to ...
(pred_insn_type): .. this.
(arm_it): Change comment.
(enum arm_reg_type): Add new value.
(reg_expected_msgs): New entry.
(asm_opcode): Add mayBeVecPred member.
(BAD_SYNTAX, BAD_NOT_VPT, BAD_OUT_VPT, BAD_VPT_COND, MVE_NOT_IT,
MVE_NOT_VPT, MVE_BAD_PC, MVE_BAD_SP): New diagnostic MACROS.
(arm_vcond_hsh): New table for vector condition codes.
(now_it): Rename to ...
(now_pred): ... this.
(now_it_compatible): Rename to ...
(now_pred_compatible): ... this.
(in_it_block): Rename to ...
(in_pred_block): ... this.
(handle_it_state): Rename to ...
(handle_pred_state): ... this. And change it to accept VPT blocks.
(set_it_insn_type): Rename to ...
(set_pred_insn_type): ... this.
(set_it_insn_type_nonvoid): Rename to ...
(set_pred_insn_type_nonvoid): ... this.
(set_it_insn_type_last): Rename to ...
(set_pred_insn_type_last): ... this.
(record_feature_use): Moved.
(mark_feature_used): Likewise.
(parse_typed_reg_or_scalar): Add new case for REG_TYPE_MQ.
(emit_insn): Use renamed functions and variables.
(enum operand_parse_code): Add new operands.
(parse_operands): Handle new operands.
(do_scalar_fp16_v82_encode): Change predication detection.
(do_it): Use renamed functions and variables.
(do_t_add_sub): Likewise.
(do_t_arit3): Likewise.
(do_t_arit3c): Likewise.
(do_t_blx): Likewise.
(do_t_branch): Likewise.
(do_t_bkpt_hlt1): Likewise.
(do_t_branch23): Likewise.
(do_t_bx): Likewise.
(do_t_bxj): Likewise.
(do_t_cond): Likewise.
(do_t_csdb): Likewise.
(do_t_cps): Likewise.
(do_t_cpsi): Likewise.
(do_t_cbz): Likewise.
(do_t_it): Likewise.
(do_mve_vpt): New function to handle VPT blocks.
(encode_thumb2_multi): Use renamed functions and variables.
(do_t_ldst): Use renamed functions and variables.
(do_t_mov_cmp): Likewise.
(do_t_mvn_tst): Likewise.
(do_t_mul): Likewise.
(do_t_nop): Likewise.
(do_t_neg): Likewise.
(do_t_rsb): Likewise.
(do_t_setend): Likewise.
(do_t_shift): Likewise.
(do_t_smc): Likewise.
(do_t_tb): Likewise.
(do_t_udf): Likewise.
(do_t_loloop): Likewise.
(do_neon_cvt_1): Likewise.
(do_vfp_nsyn_cvt_fpv8): Likewise.
(do_vsel): Likewise.
(do_vmaxnm): Likewise.
(do_vrint_1): Likewise.
(do_crypto_2op_1): Likewise.
(do_crypto_3op_1): Likewise.
(do_crc32_1): Likewise.
(it_fsm_pre_encode): Likewise.
(it_fsm_post_encode): Likewise.
(force_automatic_it_block_close): Likewise.
(check_it_blocks_finished): Likewise.
(check_pred_blocks_finished): Likewise.
(arm_cleanup): Likewise.
(now_it_add_mask): Rename to ...
(now_pred_add_mask): ... this. And use new variables and functions.
(NEON_ENC_TAB): Add entries for vabdl, vaddl and vsubl.
(N_I_MVE, N_F_MVE, N_SU_MVE): New MACROs.
(neon_check_type): Generalize error message.
(mve_encode_qqr): New MVE generic encoding function.
(neon_dyadic_misc): Change to accept MVE variants.
(do_neon_dyadic_if_su): Likewise.
(do_neon_addsub_if_i): Likewise.
(do_neon_dyadic_long): Likewise.
(vfp_or_neon_is_neon): Add extra checks.
(check_simd_pred_availability): Helper function to check SIMD
instruction availability with respect to predication.
(enum opcode_tag): New suffix value.
(opcode_lookup): Change to handle VPT blocks.
(new_automatic_it_block): Rename to ...
(close_automatic_it_block): ...this.
(TxCE, TxC3, TxC3w, TUE, TUEc, TUF, CE, C3, ToC, ToU,
toC, toU, CL, cCE, cCL, C3E, xCM_, UE, UF, NUF, nUF,
NCE_tag, NCE, NCEF, nCE_tag, nCE, nCEF): Add default value for new
field.
(mCEF, mnCEF, mnCE, MNUF, mnUF, mToC, MNCE, MNCEF): New MACROs.
(insns): Redefine vadd, vsub, cabd, vabdl, vaddl, vsubl to accept MVE
variants. Add entries for vscclrm, and vpst.
(md_begin): Add arm_vcond_hsh initialization.
* config/tc-arm.h (enum it_state): Rename to...
(enum pred_state): ...this.
(struct current_it): Rename to...
(struct current_pred): ...this.
(enum pred_type): New enum.
(struct arm_segment_info_type): Use current_pred.
* testsuite/gas/arm/armv8_3-a-fp-bad.l: Update error message.
* testsuite/gas/arm/armv8_3-a-simd-bad.l: Update error message.
* testsuite/gas/arm/dotprod-illegal.l: Update error message.
* testsuite/gas/arm/mve-vaddsubabd-bad-1.d: New test.
* testsuite/gas/arm/mve-vaddsubabd-bad-1.l: New test.
* testsuite/gas/arm/mve-vaddsubabd-bad-1.s: New test.
* testsuite/gas/arm/mve-vaddsubabd-bad-2.d: New test.
* testsuite/gas/arm/mve-vaddsubabd-bad-2.l: New test.
* testsuite/gas/arm/mve-vaddsubabd-bad-2.s: New test.
* testsuite/gas/arm/mve-vpst-bad.d: New test.
* testsuite/gas/arm/mve-vpst-bad.l: New test.
* testsuite/gas/arm/mve-vpst-bad.s: New test.
* testsuite/gas/arm/neon-ldst-es-bad.l: Updated error message.
Andre Vieira [Wed, 15 May 2019 15:44:57 +0000 (16:44 +0100)]
[PATCH 1/57][Arm][GAS]: Add support for +mve and +mve.fp
bfd/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch.
binutils/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
(arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
elfcpp/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm.h (Tag_MVE_arch): Define new enum value.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (mve_ext, mve_fp_ext): New features.
(armv8_1m_main_ext_table): Add new extensions.
(aeabi_set_public_attributes): Translate new features to new build attributes.
(arm_convert_symbolic_attribute): Add Tag_MVE_arch.
* doc/c-arm.texi: Document new extensions and new build attribute.
include/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf/arm.h (Tag_MVE_arch): Define new enum value.
* opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
Alan Modra [Thu, 16 May 2019 13:05:25 +0000 (22:35 +0930)]
Revert "ARM STM32L4XX erratum test failure"
This reverts commit
3a1bb98c3c4f983b950fbaf2797ddcd21fcb5211.
GDB Administrator [Thu, 16 May 2019 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Fri, 1 Mar 2019 11:19:22 +0000 (11:19 +0000)]
gdb/fortran: Add sizeof tests for indexed and sliced arrays
Add tests for calling sizeof on indexed and sliced arrays, and on
pointers to arrays. These are all things that currently work, but
were previously untested.
gdb/testsuite/ChangeLog:
* gdb.fortran/vla-sizeof.exp: Add tests of sizeof applied to
indexed and sliced arrays, and pointers to arrays.
Simon Marchi [Wed, 15 May 2019 15:20:16 +0000 (11:20 -0400)]
linux-thread-db.c: use bool where possible in thread_db code
I happened to be looking at this code and noticed we could replace ints
by bools at a few places.
gdb/ChangeLog:
* linux-thread-db.c (try_thread_db_load_1): Change return type
to bool.
(try_thread_db_load): Likewise.
(try_thread_db_load_from_pdir_1): Likewise.
(try_thread_db_load_from_pdir): Likewise.
(try_thread_db_load_from_sdir): Likewise.
(try_thread_db_load_from_dir): Likewise.
(thread_db_load_search): Likewise.
(has_libpthread): Likewise.
(thread_db_load): Likewise.
John Darrington [Wed, 15 May 2019 12:16:33 +0000 (14:16 +0200)]
S12Z: New option -mreg-prefix
Add a new machine dependent option to set a prefix for register names.
gas/
* config/tc-s12z.c (register_prefix): New variable. (md_show_usage,
md_parse_option): parse the new option.
(lex_reg_name): Scan the prefix if one is set.
* doc/c-s12z.texi (S12Z-Opts): Document the new option.
* testsuite/gas/s12z/reg-prefix.d: New file.
* testsuite/gas/s12z/reg-prefix.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
Sergio Durigan Junior [Fri, 10 May 2019 20:57:26 +0000 (16:57 -0400)]
Don't crash if dwarf_decode_macro_bytes's 'body' is NULL
Hi,
Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=
1708192
https://bugzilla.redhat.com/show_bug.cgi?id=
1708786
During the Fedora RPM build process, gdb-add-index is invoked to
extract the DWARF index from the binary, and GDB will segfault because
dwarf2read.c:parse_definition_macro's 'body' variable is NULL.
The underlying problem is that Fedora's rpm-build's "debugedit"
program will silently corrupt .debug_macro strings when a binary is
compiled with -g3. This is being taken care of by Mark Wielaard,
here:
https://bugzilla.redhat.com/show_bug.cgi?id=
1708786
However, I still feel it's important to make GDB more resilient
against invalid DWARF input, so I'm proposing this rather simple patch
to catch the situation when "body == NULL" (i.e., it's probably been
corrupted) and issue a complaint. This is not a real fix to the
problem, of course, but at least GDB is able to finish without
segfaulting.
OK for master?
gdb/ChangeLog:
2019-05-15 Sergio Durigan Junior <sergiodj@redhat.com>
Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=
1708192
* dwarf2read.c (dwarf_decode_macro_bytes): Check whether 'body' is
NULL, and complain if that's the case.
John Darrington [Wed, 15 May 2019 12:15:02 +0000 (14:15 +0200)]
GAS (doc): Fix misaligned menu entry.
gas/
* doc/as.texi (Machine Dependencies): Fix misaligned menu entry.
Alan Modra [Wed, 15 May 2019 07:07:18 +0000 (16:37 +0930)]
C-SKY FAIL: jbt - csky
Another failure seen with MALLOC_PERTURB_=1.
* config/tc-csky.c (md_convert_frag): Initialise trailing
padding for COND_JUMP_PIC.
Alan Modra [Wed, 15 May 2019 07:01:28 +0000 (16:31 +0930)]
ARM STM32L4XX erratum test failure
Fixes a failure seen with MALLOC_PERTURB_=1.
* elf32-arm.c (elf32_arm_write_section): Don't leave
error case of STM32L4XX_ERRATUM_BRANCH_TO_VENEER with
unitialised section contents.
Alan Modra [Wed, 15 May 2019 01:54:09 +0000 (11:24 +0930)]
.file file number checking
This adds another test for file numbers given in .file directives,
checking that the value can be represented as an unsigned int and that
a memory allocation expression doesn't overflow. I removed a test
added recently since an earlier test (num < 1) already covers the
(num < 0) case.
* dwarf2dbg.c: Whitespace fixes.
(get_filenum): Don't strdup "file". Adjust error message.
(dwarf2_directive_filename): Use an unsigned type for "num".
Catch truncation of file number and overflow of get_filenum
XRESIZEVEC multiplication. Delete dead code.
Alan Modra [Wed, 15 May 2019 01:45:17 +0000 (11:15 +0930)]
tic54x_start_line_hook
git commit
3076e59490 caused
tic54x-coff +FAIL: c54x subsym assignment/use
PR 24538
* config/tc-tic54x.c (tic54x_start_line_hook): Do skip end of line
chars in setting endp.
John Darrington [Wed, 15 May 2019 04:47:16 +0000 (06:47 +0200)]
GDB (s12z): Improve reliability of the stack unwinder.
Previously, the stack unwinder searched through consecutive bytes for values
which it thought might be the start of a stack mutating operation.
This was error prone, because such bytes could also be the operands of other
instructions. This change uses the opcodes api to interpret the code in each
frame.
gdb/ChangeLog:
* s12z-tdep.c (push_pull_get_stack_adjustment): New function.
(advance, posn, abstract_read_memory): New functions.
[struct mem_read_abstraction]: New struct.
(s12z_frame_cache): Use opcodes API to interpret stack frame code.
GDB Administrator [Wed, 15 May 2019 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Fri, 10 May 2019 16:40:15 +0000 (10:40 -0600)]
Fix assertion failure in coerce_unspec_val_to_type
coerce_unspec_val_to_type does:
set_value_address (result, value_address (val));
However, this is only valid for lval_memory. This patch changes this
code to only set the address for lval_memory values.
This seems like an ordinary oversight in coerce_unspec_val_to_type,
and a test case would be difficult to write, so I'm submitting it
without a test case.
Tested on x86-64 Fedora 29; plus using an Ada program that exhibits
the bug (but which cannot be shared).
gdb/ChangeLog
2019-05-14 Tom Tromey <tromey@adacore.com>
* ada-lang.c (coerce_unspec_val_to_type): Only set address when
value is not lval_memory.
Tom de Vries [Tue, 14 May 2019 15:45:51 +0000 (17:45 +0200)]
[gdb/doc] Mention index cache in concept and command index
The "automatic symbol index cache" entry in the docs is missing entries in the
concept and command indices. Add them.
gdb/doc/ChangeLog:
2019-05-14 Tom de Vries <tdevries@suse.de>
* gdb.texinfo (Automatic symbol index cache): Add concept and command
index entries.
Nick Clifton [Tue, 14 May 2019 15:16:56 +0000 (16:16 +0100)]
Add missing verilogtest.s file.
Tom Tromey [Mon, 13 May 2019 15:35:19 +0000 (09:35 -0600)]
Add file name styling to "info sharedlibrary"
This changes "info sharedlibrary" to add styling to the file name.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-05-14 Tom Tromey <tromey@adacore.com>
* solib.c (info_sharedlibrary_command): Style the file name.
gdb/testsuite/ChangeLog
2019-05-14 Tom Tromey <tromey@adacore.com>
* gdb.base/info-shared.exp (check_info_shared): Add "info shared"
styling test.
Nick Clifton [Tue, 14 May 2019 11:42:02 +0000 (12:42 +0100)]
Fix illegal memory access triggered when attempting to assemble a bogus i386 source file.
PR 24538
* config/tc-i386-intel.c (i386_intel_simplify_register): Reject
illegal register numbers.
Jamey Hicks [Tue, 14 May 2019 09:40:04 +0000 (10:40 +0100)]
Add new option to objcopy: --verilog-data-width. Use this option to set the size of byte bundles generated in verilog format files.
PR 19921
binutils* objcopy.c: Add new option --verilog-data-width. Use it to set
the value of VerilogDataWidth.
* doc/binutils.texi: Document the new option.
* testsuite/binutils-all/objcopy.exp: Run tests of new option.
* testsuite/binutils-all/verilog-1.hex: New file.
* testsuite/binutils-all/verilog-2.hex: New file.
* testsuite/binutils-all/verilog-4.hex: New file.
* testsuite/binutils-all/verilog-8.hex: New file.
* NEWS: Mention the new feature.
bfd * verilog.c: (VerilogDataWidth): New variable.
(verilog_write_record): Emit bytes in VerilogDataWidth bundles.
Nick Clifton [Fri, 10 May 2019 15:57:31 +0000 (16:57 +0100)]
A series of fixes to addres problems detected by compiling the assembler with address sanitization enabled.
PR 24538
gas * macro.c (get_any_string): Increase size of buffer used to hold
decimal value of expression result.
* dw2gencfi.c (get_debugseg_name): Handle an empty name.
* dwarf2dbg.c (get_filenum): Catch integer wraparound when
extending allocate file array.
(dwarf2_directive_filename): Add extra checks of the computed file
number.
* config/tc-arm.c (arm_tc_equal_in_insn): Insert copy of name into
warning hash table.
(s_arm_eabi_attribute): Check for obj_elf_vendor_attribute
returning -1.
* config/tc-i386.c (i386_output_nops): Catch an attempt to
generate nops of negative lengths.
* as.h (MAX_LITTLENUMS): Move definition to here from...
* config/atof-ieee.c: ...here.
* config/tc-aarch64.c: ...here.
* config/tc-arc.c: ...here.
* config/tc-arm.c: ...here.
* config/tc-epiphany.c: ...here.
* config/tc-i386.c: ...here.
* config/tc-ia64.c: ...here. (And correct the value).
* config/tc-m32c.c: ...here.
* config/tc-m32r.c: ...here.
* config/tc-metag.c: ...here.
* config/tc-microblaze.c: ...here.
* config/tc-nds32.c: ...here.
* config/tc-or1k.c: ...here.
* config/tc-score.c: ...here.
* config/tc-score7.c: ...here.
* config/tc-tic4x.c: ...here.
* config/tc-tilegx.c: ...here.
* config/tc-tilepro.c: ...here.
* config/tc-visium.c: ...here.
* config/tc-sh.c (md_assemble): Add check for an instruction with
no opcodes.
* config/tc-mips.c (mips_lookup_insn): Add check for very short
instruction name.
* config/tc-tic54x.c: Use unsigned chars to access is_end_of_line
array.
(tic54x_start_line_hook): Check for an empty line.
(next_line_shows_parallel): Do not walk off the end of the string.
(tic54x_macro_start): Check for too much macro nesting.
(tic54x_start_label): Add label_start parameter. Use this
parameter to check the first character of the label.
* config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Pass
line_start variable to tic54x_start_label.
PR 24538
opcodes * ia64-opc.c (ia64_find_matching_opcode): Check for reaching the
end of the table prematurely.
projects / binutils-gdb.git / log