git.libre-soc.org Git - buildroot.git/log

package/cups-filters: fix broken symlink in installation

The patch used previously to support versions of ln lacking the '-r'
option generated broken links:

    $ file target/usr/lib/cups/backend/driverless
    target/usr/lib/cups/backend/driverless: broken symbolic link to ../../usr/lib/cups/driver/driverless

Add a squashing of two patches already applied upstream that provide a
better solution:

    https://github.com/OpenPrinting/cups-filters/pull/154
    https://github.com/OpenPrinting/cups-filters/pull/157

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/cups-filters: fix build without NLS

texttotext must be linked to libiconv if !BR2_ENABLE_LOCALE so pull a
patch applied upstream that adds libiconv discovery via autoconf.

With this change, autoreconf requires the config.rpath and ABOUT-NLS
files which are not in v1.25.4. Add a pre-configure hook to fake them.

Fixes: https://bugs.busybox.net/show_bug.cgi?id=12031
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/protobuf: work around gcc bug 85180

With Microblaze Gcc version < 8.x the build hangs due to gcc bug
85180: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180. The bug
shows up when building protobuf with optimization but not when building
with -O0. To work around this, if BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y we
force using -O0.

Fixes:
http://autobuild.buildroot.net/results/73dc9610a13d6e14eec58d529617210d93d5dec4/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: fix variable name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python-flask-login: add hash for the license file

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/fakeroot: remove 1/1 numbering from patch

check-package warns with:
0002-communicate-check-return-status-of-msgrcv.patch
generate your patches with 'git format-patch -N'

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/fakeroot: test for SYSV IPC support

fakeroot can be built to either use SYSV IPC or TCP for message passing.

A bug was discovered where Microsoft Windows 10 Services for Linux
doesn't include support for SYSV IPC MsgQ. This patch adds support to
detect this case and automatically build fakeroot to use the TCP
transport instead (It is assumed a TCP transport would definitely have
more overhead then MsgQs so the default wasn't changed to TCP).

Fixes
https://bugs.busybox.net/show_bug.cgi?id=11366

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Jean-Francois Doyon <jfdoyon@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: use a post-patch hook and AUTORECONF=YES]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Revert "package/python-sip: bump to version 4.19.13"

This reverts commit 9135ab7a7c76b38b50dadbc381c55e77c86e9e0d. This
version bump causes a major issue: the entire root filesystem of the
build machine is being copied into $(STAGING_DIR)/usr/lib/python2.7/,
causing the build to consume the entire disk space of the machine.

>>> python-sip 4.19.13 Installing to target
[...]
make[2]: Leaving directory `/home/test/buildroot/output/build/python-sip-4.19.13/siplib'
Traceback (most recent call last):
File "/home/test/buildroot/output/build/python-sip-4.19.13/mk_distinfo.py", line 108, in <module>
fn_f = open(fn, 'rb')
FileNotFoundError: [Errno 2] No such file or directory: '/home/test/buildroot/output/target/usr/lib/python3.7/site-packages/sip.pyi'
make[1]: *** [install_distinfo] Error 1
make[1]: *** Waiting for unfinished jobs....
cp: cannot open `/proc/fs/aufs/plink_maint' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_fifos' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_hardlinks' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_regular' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_symlinks' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/cad_pid' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/unprivileged_userns_apparmor_policy' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/usermodehelper/bset' for reading: Permission denied
...

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mariadb: bump to version 10.3.18

Release notes:
https://mariadb.com/kb/en/library/mariadb-10318-release-notes/

Changelog:
https://mariadb.com/kb/en/mariadb-10318-changelog/

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mariadb: bump to version 10.3.17

Release notes:
https://mariadb.com/kb/en/library/mariadb-10317-release-notes/

Changelog:
https://mariadb.com/kb/en/mariadb-10317-changelog/

Fixes the following security vulnerabilities:
CVE-2019-2805
CVE-2019-2740
CVE-2019-2739
CVE-2019-2737
CVE-2019-2758

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mariadb: add bug tracker link to existing patch

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mariadb: fix build error with newer cmake

When using a newer host system cmake to build MariaDB, the following build
error occurs:

    CMake Error at cmake/os/Linux.cmake:29 (STRING):
    STRING sub-command REPLACE requires at least four arguments.
    Call Stack (most recent call first):
    CMakeLists.txt:101 (INCLUDE)

    CMake Error at cmake/os/Linux.cmake:29 (STRING):
    STRING sub-command REPLACE requires at least four arguments.
    Call Stack (most recent call first):
    CMakeLists.txt:101 (INCLUDE)

Fixes: https://bugs.busybox.net/show_bug.cgi?id=11781
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mariadb: use host-openssl from buildroot-system

mariadb no longer allows the WITH_SSL=OFF configure option. It will
instead search for openssl or gnutls headers, and if missing error out
with:

  CMake Error at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
    Could NOT find GnuTLS (missing: GNUTLS_LIBRARY GNUTLS_INCLUDE_DIR)
    (Required is at least version "3.3.24")
  Call Stack (most recent call first):
    /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:378 (_FPHSA_FAILURE_MESSAGE)
    /usr/share/cmake/Modules/FindGnuTLS.cmake:54 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
    libmariadb/CMakeLists.txt:298 (FIND_PACKAGE)

Therefore, make host-mariadb depend on host-openssl, and tell mariadb
to use the system openssl.

This was not found by autobuilders because mariadb isn't built in the
autobuilders (it's part of a choice).

Note that the target mariadb already has an unconditional dependency
on openssl.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/util-linux: revert logic regarding pam_selinux module

Leave pam_selinux enabled by default in su.pam and remove it from the
/etc/pam.d/su and /etc/pam.d/su-l files if libselinux is not selected.

This cosmetic change prevents leaving a misleading commented-out line
that references a PAM module that does not exist.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gnutls: use __get_cpuid_count() only when available

Fixes:
- http://autobuild.buildroot.org/results/4e874ed2fcc1f969f2f8ece88985ccd625f2c55b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/fltk: bump to version 1.3.5

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libgsm: bump to version 1.0.18

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bcm2835: bump to version 1.60

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tor: bump version to 0.4.1.6

Release notes: https://blog.torproject.org/new-release-tor-0416

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bdwgc: bump to version 8.0.4

Remove patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bash-completion: bump to version 2.9

Remove patch (already on version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-kiwisolver: new package

Signed-off-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: add missing external toolchain *.mk inclusion in sample

If follow through the customize-outside-br.txt with how to add external
toolchain in br-ext tree then one thing is missing - inclusion of
*.mk file with external toolchain package description.

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-simplelogging: new package

Simplelogging is easier implementation of logging.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-colorlog: new package

Colorlog is a formatter for the python logging module.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/collectl: new package

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libglib2: fix building on older distributions

When updating to libglib2 2.62.0, the file 0002-add-option-to-build-tests.patch
had to be refactored to work with the new build_tests checks. In the process of
refactoring, a missing check was overlooked in glib/meson.build causing
distributions with older versions of objcopy to fail because the older version
does not contain the --add-symbol argument.

Adding the check for the build_tests argument fixes the issue.

Fixes:
http://autobuild.buildroot.net/results/dcc2352a036aba9650eae8abaaa23819fc67332d

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libevdev: bump version to 1.8.0

For details see [1].

[1] https://lists.freedesktop.org/archives/input-tools/2019-August/001521.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ytree: needs glibc/uclibc toolchain (re_comp/re_exec)

Fixes:

  match.o: In function `SetMatchSpec':
  match.c:(.text+0x9c): undefined reference to `re_comp'
  match.o: In function `Match':
  match.c:(.text+0xca): undefined reference to `re_exec'

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ytree: uses fork(), needs MMU

Fixes [1]:

login.c:(.text+0x546): undefined reference to `fork'

[1] http://autobuild.buildroot.net/results/bcbd0b826d5af1d429c23255d63dce6c7080085e

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/acpid: bump to version 2.0.32

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mbedtls: security bump to version 2.16.3

- Remove second patch (already in version)
- Fix a missing error detection in ECJPAKE. This could have caused a
  predictable shared secret if a hardware accelerator failed and the
  other side of the key exchange had a similar bug.
- When writing a private EC key, use a constant size for the private
  value, as specified in RFC 5915. Previously, the value was written as
  an ASN.1 INTEGER, which caused the size of the key to leak about 1 bit
  of information on average and could cause the value to be 1 byte too
  large for the output buffer.
- The deterministic ECDSA calculation reused the scheme's HMAC-DRBG to
  implement blinding. Because of this for the same key and message the
  same blinding value was generated. This reduced the effectiveness of
  the countermeasure and leaked information about the private key
  through side channels. Reported by Jack Lloyd.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nilfs-utils: bump to version 2.2.8

- Change NILFS_UTILS_SITE to https://nilfs.sourceforge.io as this is the
official site with the official tarballs
- Remove first and third patch (already in version)
- Drop fourth patch and host-pkgconf from dependencies, not needed since
https://github.com/nilfs-dev/nilfs-utils/commit/d5ce780856db5200917b69cd1049bd7b839ac6bb

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bind: security bump to version 9.11.10

- Remove all patches except first one (already in version)
- Update first patch
- Fix CVE-2019-6471: A race condition when discarding malformed packets
can cause BIND to exit with an assertion failure

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libcamera: bump to version 448393f77ec9e37cb807e8e8d35c1a4877d253d4

Update to the latest version of libcamera, including a fix for toolchains
which require libatomic to be linked manually.

The patch which handles this locally is therefore removed.

Since the last version update, the option to disable building of the
unit tests has been renamed from '-Dtests=' to '-Dtest='

This is updated accordingly.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/webkitgtk: bump to version 2.26.0

This is a new major release which brings in many improvements and new
features. For a complete list, please refer to the release notes:

https://webkitgtk.org/2019/09/09/webkitgtk2.26.0-released.html

A small patch is added which fixes a build failure when X11 headers
are not available (for example, when building a Wayland-only system)

The new support for the WPE renderer on Wayland and the new Bubblewrap
sandbox need additional dependencies and therefore are explicitly
disabled at the moment.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch/riscv: set the default float ABI based on ISA extensions

This patch sets the default floating point ABI based on the ISA
extensions that have been selected rather than defaulting to soft
float.

For 64-bit:

ISA 'D' selects  lp64d
ISA 'F' selects  lp64f
Otherwise select lp64

For 32-bit:

ISA 'D' selects  ilp32d
ISA 'F' selects  ilp32f
Otherwise select ilp32

This change was proposed by Palmer Dabbelt at SiFive.

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: change Vivien Didelot e-mail address

I am exclusively using my Gmail address for now on. Reflect this in
the DEVELOPERS file.

Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: change Mathieu Audat's email address

Mathieu is no longer working at Savoir-faire Linux, update his email
address in the DEVELOPERS file.

Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libglib2: remove empty consecutive lines

Fixes the following check-package warning:

package/libglib2/libglib2.mk:90: consecutive empty lines

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bc: remove default value of _SOURCE var

check-package output:
package/bc/bc.mk:8: remove default value of _SOURCE variable

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/295683825

Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openvmtools: base sysv script on current template

Signed-off-by: Simon Rowe <simon.rowe@citrix.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lsof: bump to version 4.93.2

New upstream at github. Update homepage link and download site.

Drop the custom extract command; we now get the source tree from github.

Drop patch #2; the code detects rpc support.

Add optional dependency on libtirpc.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mosquitto: security bump to version 1.6.6

Fixes a security issue. From the annoncement:

A vulnerability exists in Mosquitto versions 1.5 to 1.6.5 inclusive.

If a client sends a SUBSCRIBE packet containing a topic that consists of
approximately 65400 or more '/' characters, i.e.  the topic hierarchy
separator, then a stack overflow will occur.

The issue is fixed in Mosquitto 1.6.6 and 1.5.9.  Patches for older versions
are available at https://mosquitto.org/files/cve/2019-hier

The fix addresses the problem by restricting the allowed number of topic
hierarchy levels to 200.  An alternative fix is to increase the size of the
stack by a small amount.

https://mosquitto.org/blog/2019/09/version-1-6-6-released/

Also notice that 1.6.5 silently fixed a security issue:

CVE-2019-11778

A vulnerability exists in Mosquitto version 1.6 to 1.6.4 inclusive, known as CVE-2019-11778

If an MQTT v5 client connects to Mosquitto, sets a last will and testament,
sets a will delay interval, sets a session expiry interval, and the will
delay interval is set longer than the session expiry interval, then a use
after free error occurs, which has the potential to cause a crash in some
situations.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd-bootchart: enable systemd-bootchart.service

This would normally be enabled by systemctl preset-all however since we
don't have a host systemctl we need to enable the service manually.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpcbind: bump to version 1.2.5

- Remove all patches except first one (already in version)
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/chocolate-doom: bump to version 3.0.0

- Remove patch (already in version)
- Switch to sdl2
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: trim runtime tests for Ricardo Martincoski

Keep listing the test infra so the developer is included in reviews, but
trim the list of tests to those the developer are most interested in.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/scancpan: improve license file detection

MANIFEST may contains line like this:
"LICENSE LICENSE file (added by Distar)"
so, retains only the first word.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luksmeta: do not build man pages

Fixes:
http://autobuild.buildroot.net/results/a6247b95f1578fe1daec485589582310c75b5d84/

luksmeta-v9 generates man pages at build if a2x is available since:

commit 3fa51bb22350fee101fc52044949f6eb394114ae
Author: Daniel Kopeček <dkopecek@redhat.com>
Date:   Fri Jul 13 01:52:45 2018 +0200

   Generate manual page from source during build time

   If a2x (asciidoc) is not available during configure time,
   a warning will be generated and the manual page wont be
   generated nor installed.

Man pages are not needed on target and the build step fails in certain
setups, so disable it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bwm-ng: bump version to 0.6.2

Add hash for license file, and drop 'v' from version for compatibility with
release-monitoring.org.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-periphery: bump to version 1.1.2

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-validators: bump version to 0.12.6

Includes a number of post-0.12.2 fixes, including a python 3.7 compatibility
fix:

https://github.com/kvesteri/validators/blob/master/CHANGES.rst

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/dependencies/dependencies.sh: check for JSON:PP Perl module

The JSON::PP Perl module is used at build time by the webkitgtk and
wpewebkit packages.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-role-tiny: bump to version 2.000008

The project now ships a proper LICENSE file, with the complete license
text, so we use it instead of the README file. The license remains the
same as Perl, i.e Artistic license or GPL-1.0+.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-net-dns: bump to version 0.56

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-mailtools: bump to version 2.21

The license file hash has changed, due to changes in the installation
instructions.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-file-slurp: bump to version 9999.28

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-devel-stacktrace: bump to version 2.04

The copyright year in the LICENSE file was changed, which explains why
the hash is modified:

-This software is Copyright (c) 2000 - 2017 by David Rolsky.
+This software is Copyright (c) 2000 - 2019 by David Rolsky.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-date-manip: bump to version 6.78

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-class-method-modifiers: bump to version 2.13

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fio: bump to version 3.15

- Remove patch (already in version)
- Change FIO_SITE to http://brick.kernel.dk/snaps to remove 'fio-'
prefix from FIO_VERSION to match what is given by
release-monitoring.org

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fio: fix build with glibc 2.30

Fixes:
- http://autobuild.buildroot.org/results/ec93c8e7f046b081aaa9e0a76708d61ba1ab921c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pip: bump to version 19.2.3

Also:
Select PYTHON_SSL or PYTHON3_SSL as pip connects to https://pypi.org
making SSL mandatory for runtime.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/grpc: fix build with glibc 2.30

Fixes:
- http://autobuild.buildroot.org/results/42eb63a89228d340cab05c7ab65fab9b02814689

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/haproxy: depends on BR2_TOOLCHAIN_HAS_SYNC_1

Fixes:
- http://autobuild.buildroot.org/results/512904ace780508de5e3a56b0094bbe6287d751e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/afboot-stm32: bump to version 0.2

Remove patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libglib2: make util-linux an optional dependency

libglib2 needs util-linux only for libmount, which is a configuration option.
Instead, check if util-linux-libmount is selected, and if so, set the option
to true.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libglib2: bump to version 2.62.0

Other changes:
- Refactor 0002-add-option-to-build-tests.patch to work with the new version.
- Add the new option oss_fuzz=disabled to HOST_LIBGLIB2_CONF_OPTS and
LIBGLIB2_CONF_OPTS.
- Change -Diconv=gnu to -Diconv=external as the option has changed.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: adjust e-mail address for Giulio Benetti

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add Pierre-Jean Texier for mxml

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mxml: bump to version 3.1

See https://github.com/michaelrsweet/mxml/releases/tag/v3.1

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/syslog-ng: version bump to 3.23.1

Update to latest syslog-ng version.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wireguard: bump version to 0.0.20190913

For details of the changes, see the announcement:
https://lists.zx2c4.com/pipermail/wireguard/2019-September/004539.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libopenssl: security bump to version 1.1.1d

Fixes the following security vulnerabilities:

- ECDSA remote timing attack (CVE-2019-1547)
  Severity: Low

- Fork Protection (CVE-2019-1549)
  Severity: Low

- Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
  Severity: Low

For more details, see the advisory:
https://www.openssl.org/news/secadv/20190910.txt

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openvmtools: source default file

In the SYSV init script allow /etc/default/vmtoolsd to override $ARGS
(if it present)

Signed-off-by: Simon Rowe <simon.rowe@citrix.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libcroco: bump version to 0.6.13

Removed patches applied upstream:
https://github.com/GNOME/libcroco/commit/898e3a8c8c0314d2e6b106809a8e3e93cf9d4394
https://github.com/GNOME/libcroco/commit/9ad72875e9f08e4c519ef63d44cdbd94aa9504f7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mosquitto: bump version to 1.6.5

Bugfix release, fixing a number of issues:

- Fix v5 DISCONNECT packets with remaining length == 2 being treated as a
  protocol error.  Closes #1367.
- Fix support for libwebsockets 3.x (excluding 3.2.0)
- Fix slow websockets performance when sending large messages.  Closes
  #1390.
- Fix bridges potentially not connecting on Windows.  Closes #478.
- Fix clients authorised using use_identity_as_username or
  use_subject_as_username being disconnected on SIGHUP.  Closes #1402.
- Improve error messages in some situations when clients disconnect.
  Reduces the number of "Socket error on client X, disconnecting" messages.
- Fix Will for v5 clients not being sent if will delay interval was greater
  than the session expiry interval.  Closes #1401.
- Fix CRL file not being reloaded on HUP.  Closes #35.
- Fix repeated "Error in poll" messages on Windows when only websockets
  listeners are defined.  Closes #1391.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-flask-login: bump to version 0.4.1

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ytree: new package

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/vnstat: bump version to 2.4

Added license hash.

vnstat as of version 2.0 requires sqlite:
https://github.com/vergoh/vnstat/commit/bb24d7bd0f5e9051872f88a98f8b7906b4959aa7

Added --disable-extra-paths to _CONF_OPTS to prevent build error:
https://github.com/vergoh/vnstat/commit/fffc15d877edf37ff42ab057e1f30c70e6e99314

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libite: bump version to 2.1.0

Added md5 hash provided by upstream.
Switched _SOURCE to .xz tarball provided by upstream.
This tarball contains a configure script so we do not need to
autoreconf anymore.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/apr: fix non-portable atomics

apr-1.7.0 added support for 8 bytes atomics for 32 bit archs
https://github.com/apache/apr/commit/2f61f960c81e4a45f3849baa7563812e7e526436

We need to adjust our _CONF_OPTS which fixes an apache build error.

Fixes:
http://autobuild.buildroot.net/results/f24/f2461c1ed542e050afd761db5faeaaff1f51775b/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jsoncpp: bump version to 1.9.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jsoncpp: switch build system to meson

Bumping jsoncpp to 1.9.1 will cause a CMake-related build error:
https://github.com/open-source-parsers/jsoncpp/issues/970

To fix the bug upstream suggests to switch to meson:
"Our official policy has been only supporting the meson build, and
having users submit fixes for the CMake build."
https://github.com/open-source-parsers/jsoncpp/issues/970#issuecomment-509794015

Remove all _CONF_OPTS as they are not supported by meson.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libpjsip: bump to 2.9

Updates:
- remove patch now upstream
- remove --disable-oss, not supported anymore
- 2.9 supports gnutls, add optional dependency
- bonus: switch to https for downloading

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lrzip: new package

lrzip is a compression utility that excels at compressing
large files (usually > 10-50 MB)

Signed-off-by: Sam Lancia <sam@gpsm.co.uk>
[Thomas: license is GPL-2.0+, not GPL-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/expat: security bump to version 2.2.8

Fixes the following security vulnerability:

CVE-2019-15903: In libexpat before 2.2.8, crafted XML input could fool the
parser into changing from DTD parsing to document parsing too early; a
consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber)
then resulted in a heap-based buffer over-read.

While we're at it, also change to use .tar.xz rather than the bigger
.tar.bz2.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ltp-testsuite: fix build with glibc 2.30

Fixes:
- http://autobuild.buildroot.org/results/e8b72f5d93d3565d41364a52c0024a0292a06b41

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luv: install libluv.pc.in

Archive 1.30.1-0 doesn't contain libluv.pc.in which will break the build

Fixes:
- http://autobuild.buildroot.org/results/5ec6b5a3622c343f7e401b7da7d4a1da15be2733

This issue has been fixed upstream in
https://github.com/luvit/luv/commit/946784fba047bcd275554b5040949e3d70994b30,
which should be in the next release.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libcamera: link with atomic when needed

Fixes:
- http://autobuild.buildroot.org/results/1f0b8338f5f39aa86b9d432598dae2f53c5f7c84

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uclibc: fix termios redefinition issue for PowerPC

Fix redefinition of 'struct termios' by syncing termios powerpc headers
from glibc, the commit which fixed the same issue in glibc:

    d4795e4a43e6f0c221bc5dc64c612206a21a177b PowerPC: Fix termios definitions

    https://sourceware.org/git/?p=glibc.git;a=commit;h=d4795e4a43e6f0c221bc5dc64c612206a21a177b

it fixed the following bug request:

    https://bugzilla.redhat.com/show_bug.cgi?id=1122714

In case of Buildroot it fixes flashrom build for PowerPC.

Fixes:
http://autobuild.buildroot.net/results/797dde5cbf0e94162c7cc7b557841605c78ac2f3/

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xlib_libXpm: add license file, add hashes

Add COPYRIGHT to LICENSE_FILES, and add hashes for both license files.

Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xlib_libXt: add license file hash

Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xlib_libXaw: add license file hash

Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/zsh: bump to version 5.7.1

Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xxhash: bump to version 0.7.1

update hash for xxhsum.c, only code changes, not license.

Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xterm: bump to version 348

Replace version.c by COPYING in LICENSE_FILES, and add a hash for the
license file.

Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
[Thomas: drop version.c in the license files, the newly introduced
COPYING file is much better]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xtables-addons: bump to version 3.4

Add hash for LICENSE.

This version works with linux kernel 5.0 and newer. It requires
CONFIG_NF_NAT enabled in the kernel configuration, otherwise it fails
to build:

ERROR: "nf_nat_setup_info" [/home/thomas/projets/buildroot/output/build/xtables-addons-3.4/extensions/xt_DNETMAP.ko] undefined!

Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
[Thomas: enable CONFIG_NF_NAT in the kernel configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>