git.libre-soc.org Git - buildroot.git/log

uclibc-ng-test: fix build with glibc 2.28

Since glibc 2.28
(https://savannah.gnu.org/forum/forum.php?forum_id=9205), the obsolete
functions encrypt, encrypt_r, setkey, setkey_r, cbc_crypt, ecb_crypt,
and des_setparity are no longer available to newly linked binaries, and
the headers <rpc/des_crypt.h> and <rpc/rpc_des.h> are no longer
installed. These functions encrypted and decrypted data with the DES
block cipher, which is no longer considered secure. Software that still
uses these functions should switch to a modern cryptography library,
such as libgcrypt.

So add a NO_CRYPT variable to disable test/crypt

Fixes:
- http://autobuild.buildroot.org/results/158438debb0ce313b012b871e199bed42ba38294

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: ensure we use the realpath(3) of DL_DIR

When $(TOPDIR)/dl is a symlink, checking out git submodules can fail,
as reported by Michael in #11086.

To reproduce a similarly-related mis-behaviour:

    $ mkdir -p foo/bar foo/buz
    $ cd foo/bar
    $ ln -s ../buz meh
    $ cd meh
    $ cd ../../foo

The last command should not succeed, because, relative to meh, there is
no ../../foo directory; we would expect it to be ../../../foo, instead.
But since meh is a symlink to a directory, then a relative path from that
symlink is interpreted as relative to the derefrenced directory, i.e.
from buz in this case.

But where this gets even weirder, is that, if the last command is
replaced by:

    $ cd ../../../foo

then it still works, too.

And that is the root of Michael's issue: the dl directory in Buildroot's
TOPDIR is a symlink to a similarly-named directory one directory higher,
which then confuses relative paths, which gets especially and noticeably
bad for git submodules.

Avoid this strangeness, and just use so-called "physical" path, i.e. a
path where all symlinks to directories have been dereferenced.

Fixes: #11086
Reported-by: Michael Nosthoff <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Michael Nosthoff <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libv4l: v4l2-compliance needs fork

Since bump to 1.16.2, v4l2-compliance uses fork, see:
https://git.linuxtv.org/v4l-utils.git/commit/utils/v4l2-compliance/?id=79d98edd1a27233667a6bc38d3d7f8958c2ec02c

So add a patch to disable v4l2-compliance if fork is unavailable

Fixes:
- http://autobuild.buildroot.org/results/447d792ce21c0e33a36ca9384fee46e099435ed8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

flatcc: fix debug build

flatcc is named flatcc_d if BR2_ENABLE_DEBUG is set because of the
following line in CMakeLists.txt: set(CMAKE_DEBUG_POSTFIX "_d")

So update FLATCC_TARGET_REMOVE_FLATCC_COMPILER hook to replace flatcc
by flatcc*

Fixes:
- http://autobuild.buildroot.org/results/a47f49cd2fdd809257bd7e83dca620f2e6aac85b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sconeserver: needs zlib

Since bump to 6b932d7d8dbb700b830205e7111e469cefff490c and
https://github.com/sconemad/sconeserver/commit/34b01e9d332f912da82ab1c09529a33969ff6ebb,
sconeserver needs zlib so select it

Fixes:
- http://autobuild.buildroot.org/results/b5e2b8635b37e6f2803a6031b154cf67685a4221

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

prosody: security bump to version 0.10.2

This fixes a cross-host authentication vulnerability, CVE-2018-10847.
The issue affects Prosody instances that have multiple virtual hosts
(including anonymous authenticated hosts):
https://blog.prosody.im/prosody-0-10-2-security-release

A full security advisory is available at
https://prosody.im/security/advisory_20180531

Compute hashes locally as they are no more available on
https://prosody.im/downloads/source/{MD5,SHA1,SHA256,SHA512}SUMS

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs/common.mk: Fix show-build-order

The command "make show-build-order" doesn't show dependencies of rootfs-common target.

This patch adds $(ROOTFS_COMMON_DEPENDENCIES) to PACKAGES variable.

Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

utils/genrandconfig: add missing new line when creating the configuration

When adding the custom BR2_WGET value in the configuration,
genrandconfig forgets to add a newline. Due to this, the next option
that is added is printed on the same line as BR2_WGET="", which causes
it to be ignored.

Due to this, in all builds, the line right after BR2_WGET was
ignored. It could have been BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX,
BR2_INIT_SYSTEMD, BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV,
BR2_STATIC_LIBS or BR2_PACKAGE_PYTHON_PY_ONLY depending on the
randomization.

Fix that by adding a proper newline at the end of the BR2_WGET option.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer: fix build on riscv

RISC-V supports unaligned accesses, but these might run extremely slowly
depending on the implementation so set as_cv_unaligned_access to no on
this architecture, see:
https://gitlab.freedesktop.org/gstreamer/gstreamer/commit/8a156d1725ecd03f2e8cdc8874e081dda2d3b43d

Fixes:
- http://autobuild.buildroot.org/results/dca32c929350311fca1a85e251d318b43c4a3177

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

easydbus: fix build without C++

Specify that easydbus is a C project file otherwise build will fail if
no C++ compiler is found by cmake

Fixes:
- http://autobuild.buildroot.org/results/486c3cd98124e7415dee2fd1463bd5e0fcc9ba91

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openocd: add missing host-pkgconf dependency

The configure.ac script uses PKG_CHECK_MODULES(), and we autoreconf
the package, so host-pkgconf should be listed in the dependencies.

This issue is seen either with per-package folders, or by doing a
clean build with just "make openocd":

>>> openocd 0.10.0 Configuring
>>> openocd 0.10.0 Autoreconfiguring
[...]
configure.ac:12: error: possibly undefined macro: AC_MSG_WARN
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:201: error: possibly undefined macro: AC_DEFINE
configure.ac:582: error: possibly undefined macro: AC_MSG_NOTICE

Even if the message seems unrelated, it's really the lack of pkg.m4
from host-pkgconf that causes the issue.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libassuan: fixup libassuan-config

The libassuan library installs libassuan-config, but it is not
currently fixed up by our <pkg>_CONFIG_SCRIPTS logic. While this
doesn't cause any problem today, it fails badly with per-package
folders, so let's use <pkg>_CONFIG_SCRIPTS.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libv4l: bump version to 1.16.2

- changes since 1.16.1
  0f68a3f6 configure: build without BPF support in ir-keytable
  5f8bd4e8 keytable: fix compilation warning
  f735bee7 keytable: fix BPF protocol compilation on mips
  c393c3bc Prepare for 1.16.2 release

- use new '--disable-bpf' option instead of ac_cv_prog_CLANG
  to disable BPF support, fixes [1]:

  bpf.c:48:4: error: #error __NR_bpf not defined. libbpf does not support your arch.

- remove upstream denied patch (see [2]) fixing part of the BPF support
  for older toolchains

[1] http://autobuild.buildroot.net/results/32b8f63e84616f91b645230e889eb1518972a398
[2] https://www.spinics.net/lists/linux-media/msg142729.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigsegv: add RISC-V support

This commit backports an upstream commit adding RISC-V support to
libsigsegv, and adds a patch that finalizes the RISC-V support to make
it compatible with cross-compilation.

Fixes:

http://autobuild.buildroot.net/results/bd12cb3db3b46860a4ab8fb91052319dce75202a/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dt-utils: fix hash

Hash has been reported as wrong by autobuilder since August 16th
Perhaps, it was wrong since bump to v2018.05.0 on August 9th

Fixes:
- http://autobuild.buildroot.org/results/c6c8ede30623cc20011916cc95dbdae34dcc0344

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

shadowsocks-libev: fix build on riscv

Define _REENTRANT otherwise pthread detection will fail

Fixes:
- http://autobuild.buildroot.org/results/c5406206190b46e15d35d05c5ed026ee7632f5b1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

imx-uuc: bump revision to 79e9798e to fix glibc 2.28 build

Main changes:
- fix build error with glibc 2.28
- re-factor the code
- use unique CPU ID when available
- improve UDC management

Fixes:
http://autobuild.buildroot.net/results/b39d56c1573308c4f947de23363da7c05e2aaf0d/

Also switch back the repository from codeauroraforum to NXPmicro now
that the Qualcomm/NXP merger was denied.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libsemanage: define installation location of semanage.conf for host

When /etc/selinux/semanage.conf does not exist, libsemanage tries to
overwrite it. For the target package, it works fine because $(DESTDIR)
is taken into account.

However, for the host package, $(DESTDIR) is empty, and the location
used for /etc/selinux/semanage.conf is not affected by $(PREFIX). This
causes host-libsemanage to try to install /etc/selinux/semanage.conf,
which obviously fails with:

  test -f /etc/selinux/semanage.conf || install -m 644 -D semanage.conf /etc/selinux/semanage.conf
  install: cannot create directory '/etc/selinux': Permission denied

To fix this, this commit passes DEFAULT_SEMANAGE_CONF_LOCATION in the
make options when building/installing host-libsemanage, providing a
path to semanage.conf that Buildroot can write to.

Fixes:

  http://autobuild.buildroot.net/results/cd27e3c66274622d0c3dd5a601a36efb1bc45011/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xlib_libfontenc: add missing dependency on host-pkgconf

The xlib_libfontenc configure.ac uses PKG_CHECK_MODULES(), but the
Buildroot package does not have a dependency on host-pkgconf. This
causes a build failure with per-package host/target folders, or if one
builds just with "make xlib_libfontenc", which is why it was never
detected by the autobuilders.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

elfutils: security bump to version 0.174

Fixes the following security issues:

CVE-2018-16062: dwarf_getaranges in dwarf_getaranges.c in libdw in elfutils
before 2018-08-18 allows remote attackers to cause a denial of service
(heap-based buffer over-read) via a crafted file.

CVE-2018-16402: libelf/elf_end.c in elfutils 0.173 allows remote attackers
to cause a denial of service (double free and application crash) or possibly
have unspecified other impact because it tries to decompress twice.

CVE-2018-16403: libdw in elfutils 0.173 checks the end of the attributes
list incorrectly in dwarf_getabbrev in dwarf_getabbrev.c and dwarf_hasattr
in dwarf_hasattr.c, leading to a heap-based buffer over-read and an
application crash.

For more details, see the announcement:
https://sourceware.org/ml/elfutils-devel/2018-q3/msg00116.html

0.172 and 0.173 also included fixes for crashes and hangs found by afl-fuzz
(no CVEs assigned):
https://sourceware.org/ml/elfutils-devel/2018-q2/msg00272.html
https://sourceware.org/ml/elfutils-devel/2018-q2/msg00209.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnss: security bump to version 3.39

Fixes the following security issue:

CVE-2018-12384: NSS responded to an SSLv2-compatible ClientHello with a
ServerHello that had an all-zero random.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnspr: fix nios2 and microblaze support patches

Commit c9e3d5b6c57 (libnspr: bump to version 4.20) did not refresh the
hunks touching the _linux.cfg file. As a result, these hunk were applied
to the wrong (x86 specific) place in that file, rendering them
ineffective. Refresh the patches to fix that.

Fixes:
http://autobuild.buildroot.net/results/2d1/2d1288e98a6459d84c2599c99b5617a2fde81f62/

Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs: don't use an intermediate tarball

Since 118534fe54b (fs: use a common tarball as base for the other
filesystems), the filesystem creation is split in two steps, using an
intermediate tarball to carry the generic, common finalisations to the
per-filesystem finalisation and image creation.

However, this intermediate tarball causes an issue with capabilities:
they are entirely missing in the generated filesystems.

Capabilities are stored in the extended attribute security.capability,
which tar by default will not store/restore, unless explicitly told to,
e.g. with --xattrs-include='*', which we don't pass.

Now, passing this option when creating and extracting the intermediate
tarball, both done under fakeroot, will cause fakeroot to report an
invalid filetype for files with capabilities. mksquashfs would report
such unknown files as a warning, while mkfs.ext2 would fail (with a
similar error message), e.g.:

File [...]/usr/sbin/getcap has unrecognised filetype 0, ignoring

This is due to a poor interaction between tar and fakeroot; running as
root the exact same commands we run under fakeroot, works as expected.
Unfortunately, short of fixing fakeroot (which would first require
understanding the problem in there), we don't have much options.

The intermediate tarball was made to avoid redoing the same actions over
and over again for each filesystem to build. However, most of the time,
only one or two such filesystems would be enabled [0], and those actions
are usually pretty lightweight. So, using an intermediate tarball does
not provide a big optimisation.

The main reason to introduce the intermediate tarball, however, is that
it allows to postpone per-filesystem finalisations to be applied only
for the corresponding filesystem, not for all of them.

So, we get rid of the intermediate tarball, and simply move all of the
code to run under fakeroot to the per-filesystem fakeroot script.
Instead of extracting the intermediate tarball, we just rsync the
original target/ directory, and apply the filesystem finalisations on
that copy. The only thing still done in the rootfs-common step is to
generate the intermediate files (users file, devices file) that are used
in the fakeroot script.

Fixes: https://bugs.busybox.net/show_bug.cgi?id=11216
Note: an alternate solution would have been to keep the intermediate
tarball to keep most of the common finalisations, and move only the
permissions to each filesystem, but that was getting a bit more complex
and changed the ordering of permissions and post-fakeroot scripts. Once
we bite the bullet of having some common finalisation done in each
filesystem, it's easier to just move all of them.

[0] Most probsably, users would enable the real filesystem to put on
their device, plus the 'tar' filesystem, to be able to easily inspect
the content on their development machine.

Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

gstreamer1: fix riscv64 compile

Add upstream patch [1]:

gstconfig.h.in: initial RISC-V support

Fixes [2]:

../gst/gstconfig.h:112:4: error: #error "Could not detect architecture; don't know whether it supports unaligned access! Please file a bug."

[1] https://gitlab.freedesktop.org/gstreamer/gstreamer/commit/8a156d1725ecd03f2e8cdc8874e081dda2d3b43d
[2] http://autobuild.buildroot.net/results/07efafadff75ae2fb1d2b8d420be72345906af6c

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnspr: bump to version 4.20

Support for riscv was added in this version

Fixes:
- http://autobuild.buildroot.org/results/a98db13ea105d627f2a4770969b31550926c2791

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 18}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

supertuxkart: fix build on bdver3

Retrieve upstream patch to fix build failure in
lib/graphics_utils/mipmap/cpusimd.h due to direct inclusion of
intrinsics headers:
https://github.com/supertuxkart/stk-code/issues/3091

Fixes:
- http://autobuild.buildroot.org/results/52bd5c45b0d04a863a2530d388899b3e46494ee9

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libkrb5: fix build on riscv

Define _REENTRANT otherwise pthread detection will fail

Fixes:
- http://autobuild.buildroot.org/results/39a51d0c3feab74edd8a17c9174d031ccc7ffe1d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libmicrohttpd: fix build on riscv

Define _REENTRANT like already done for ARC otherwise pthread detection
will fail

Fixes:
- https://autobuild.buildroot.org/results/910dc7164312637bf4dcd89e4cb476ae198466c8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: explicitly configure split-usr=false and split-bin=true

meson-based build of systemd runs a couple of checks on the structure
of the *host* system which will incorrectly configure systemd if build
host configuration doesn't match Buildroot target.

One can also find the following in the NEWS file:

* A new -Dsplit-bin= build configuration switch may be used to specify
  whether bin and sbin directories are merged, or if they should be
  included separately in $PATH and various listings of executable
  directories. The build configuration scripts will try to autodetect
  the proper values of -Dsplit-usr= and -Dsplit-bin= based on build
  system, but distributions are encouraged to configure this
  explicitly.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wireshark: fix static build

Don't give a path in --with-pcap option otherwise PCAP_CONFIG won't be
used (see AC_WIRESHARK_PCAP_CHECK in acinclude.m4) to retrieve pcap
static dependencies such as -lnl-3 and as a result pcap detection will
fail

Fixes:
- http://autobuild.buildroot.org/results/084354a33825cf4e723e0a9f1e9656ad2a212a15

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ncmpc: disable documentation

Fixes:
- http://autobuild.buildroot.org/results/4822b195628b3ce0d3fd6428bcba2cca158e92be

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trace-cmd: fix site

Replace $(BR2_KERNEL_MIRROR) by https://git.kernel.org/pub, which
fixes the download of this package:

>>> trace-cmd trace-cmd-v2.6.1 Downloading
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
Removing it and starting afresh.
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
This is the second time in a row; bailing out
--2018-11-11 21:08:00-- http://sources.buildroot.net/trace-cmd/trace-cmd-trace-cmd-v2.6.1.tar.gz
Resolving sources.buildroot.net (sources.buildroot.net)... 104.25.210.19, 104.25.211.19, 2606:4700:20::6819:d313, ...
Connecting to sources.buildroot.net (sources.buildroot.net)|104.25.210.19|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1859835 (1.8M) [application/x-gtar-compressed]

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qemu: disable opengl

Since version 0.15.0, qemu has an optional dependency to opengl:
https://github.com/qemu/qemu/commit/20ff075bb3340c5278a0da38ad1f4d602565aa06

Since version 2.4, libepoxy is also needed to enable opengl:
https://github.com/qemu/qemu/commit/dcf30025c3e3d43140a687240433de1920adf8b0

As a result if libepoxy is built before qemu, opengl support will be
detected (see config.log):
OpenGL support    yes
OpenGL dmabufs    yes

This will raise the failures in milkymist-tmu2:
hw/display/milkymist-tmu2.c:35:22: fatal error: X11/Xlib.h: No such file or directory

or in sdl2:
  CC      /home/peko/autobuild/instance-0/output/targetui/sdl2-2d.o
In file included from /home/peko/autobuild/instance-0/output/build/qemu-2.12.1/include/ui/egl-context.h:5:0,
                 from ui/egl-context.c:3:
/home/peko/autobuild/instance-0/output/build/qemu-2.12.1/include/ui/egl-helpers.h:45:55: error: unknown type name 'Window'; did you mean 'minor'?

or in translate-a64:
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/target/arm/translate-a64.c: In function 'handle_shri_with_rndacc':
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/target/arm/translate-a64.c:7000:28: warning: 'tcg_src_hi' may be used uninitialized in this function [-Wmaybe-uninitialized]
             tcg_gen_mov_i64(tcg_src, tcg_src_hi);
                            ^
../ui/gtk-egl.o: In function `gd_egl_init':
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/ui/gtk-egl.c:52: undefined reference to `gdk_x11_window_get_xid'

So, for the time being, disable opengl as done in xen since commit
13c6754f3c1d2a14516f641490e9dd6f4c183d7c.

Fixes:
- http://autobuild.buildroot.org/results/656e45721c72197834462eb2bd8c762e520725a4
- http://autobuild.buildroot.org/results/d4736a930144fc5e25b377bc1c0baf44fbf8718d
- http://autobuild.buildroot.org/results/50e0d7d1b4f5c2b827b50bb82d8fbc066bf31118

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libiscsi: fix build failures due to warnings

Retrieve two upstream patches to fix build failures due to warnings

Fixes:
- http://autobuild.buildroot.org/results/7ec1e1cc060bbdaaf758c0d55a053247b731e792

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website/news.html: update for 2018.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2018.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: add additional resolved issues since 2018.08

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: add recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libmpdclient: bump to version 2.16

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd-mpc: bump to version 0.31

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd: bump to version 0.20.23

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/meson: bump to version 0.47.2

Note, that there is already a patch [1] to bump the version to 0.48.1.
However, the bump to version 0.48.x has some unresolved issues.

In the meantime, until the issue with 0.48 is resolved, bump to latest
version of the 0.47 branch.

[1] http://patchwork.ozlabs.org/patch/986260/

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

valgrind: disable for mips64r6/mips64elr6

Fixes [1]:

  /tmp/ccBAUqbI.s: Assembler messages:
  /tmp/ccBAUqbI.s:622: Error: opcode not supported on this processor: mips64r6 (mips64r6) `movn $2,$4,$7'
  /tmp/ccBAUqbI.s:2607: Error: opcode not supported on this processor: mips64r6 (mips64r6) `movn $2,$4,$7'

[1] http://autobuild.buildroot.net/results/dc52088222e9fbedcebffc1c39be6d2fecfffe5d

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-mwclient: bump version to 0.9.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libffi: bump to version 3.3-rc0

- Update site to github (for the time being, as 3.3-rc0 is a release
  candidate, it is not published on the official ftp)
- Update third patch
- Remove fourth and fifth patches (already in version)
- Remove uneeded hooks, as public headers are now installed in the
  standard path since
  https://github.com/libffi/libffi/commit/982b89c01aca99c7bc229914fc1521f96930919b
- New risc-v support:
  https://github.com/libffi/libffi/commit/3840d49aaa831d649b1597518a2903dfed0d57f3

Fixes:
- http://autobuild.buildroot.org/results/3edf66362ea5a83291f19373e4b6f2e5cce98d7b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sconeserver: bump version

https://github.com/sconemad/sconeserver/commit/6b932d7d8dbb700b830205e7111e469cefff490c
adds support for OpenSSL 1.1

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-buildroot: enable glibc for all little-endian ARCs with atomic ops

Initially we had a port only for ARCv2 cores but then with a simple
change ARCompact cores got supported as well.

So we generalize from BR2_archs to BR2_arcle as we haven't tried to
get glibc working on big-endian ARCs yet.

Also we never bothered to check avaialbility of atomic instructions in
the core but in case of Glibc for ARC this is really a must, so we add
this check here.

Note in case of uClibc we may have system w/o HW atomics but:

1. Only single-core systems are allowed
2. Atomic instructions are emulated via arc_usr_cmpxchg syscall

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libgpiod: bump version to v1.2

Release notes:
https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/tree/NEWS?h=v1.2.x

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

squid: security bump to version 4.4

Fixes SQUID-2018_4:

Due to incorrect input handling, Squid is vulnerable to a Cross-Site
Scripting vulnerability when generating HTTPS response messages about TLS
errors.

For more details, see the advisory:

http://www.squid-cache.org/Advisories/SQUID-2018_4.txt

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libnfs: add patch to fix musl build issue

Add a patch to fix build issues with the musl C library.

This patch fixes an autobuild issue when linking the mpd package
against libnfs. The header file libnfs.h uses `struct timeval` which is
defined in `<sys/time.h>` for POSIX systems. Unfortunately, upstream
only includes it conditionally, based on the system. Therefore, we
remove the check in the first patch.

Reported upstream:
https://github.com/sahlberg/libnfs/issues/272

Fixes:
http://autobuild.buildroot.org/results/452/4522014698b9fe50720a71b663e47a75805bcf54
http://autobuild.buildroot.org/results/b0a/b0a0c20ad1705e9fa7ba4a12eb9c182e8077ab0c
http://autobuild.buildroot.org/results/53c/53c87361923cc177de7889523b3d16ba6b1d3d0f
.. and more.

Previous patch: Changes requested
http://patchwork.ozlabs.org/patch/973605/

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gcc: fix xtensa uclinux code generation

xtensa-uclinux uses bFLT executable file format that cannot relocate
fields representing offsets from data to code. C++ objects built as PIC
use offsets to encode FDE structures. As a result C++ exception handling
doesn't work correctly on xtensa-uclinux. Don't use PIC by default on
xtensa-uclinux.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

attr: Add a patch to fix an unconditional infinite recursion

The bump to 2.4.48 introduced a bug that, according to the author,
only happen in certain cases on glibc. But under uclibc-ng, it happens
every time.

The bug essentially cause any program calling any libattr.so function
to enter an infinite recursion, because of a symbol conflict between
uclibc-ng and libattr wrappers, that causes the libattr wrappers to
call themselves.

This infinite recursion does not consume the stack, so programs
basically behave like they enter an infinite loop.

It is easy to reproduce with qemu_arm_versatile_defconfig +
BR2_PACKAGE_ATTR: "getfattr ." never returns and takes 100% CPU.

Upstream fixed it, but the patch is not part of a release yet,
so take the patch.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nginx: security bump to 1.15.6

Fixes the following security issues:

CVE-2018-16843: Excessive memory usage in HTTP/2

CVE-2018-16844: Excessive CPU usage in HTTP/2

CVE-2018-16845: Memory disclosure in the ngx_http_mp4_module

Refreshed patch 0004 + 0007 as they no longer applied cleanly.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mosquitto: security bump to version 1.5.4

>From the announcement:

When using a TLS enabled websockets listener with require_certificate
enabled, the mosquitto broker does not correctly verify client certificates.
This is now fixed. All other security measures operate as expected, and in
particular non-websockets listeners are not affected by this.

https://mosquitto.org/blog/2018/11/version-154-released/

Drop patch 0001, now applied upstream:
https://github.com/eclipse/mosquitto/pull/933

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/testing/tests/fs/test_f2fs: fix flake8 warning

This commit fixes the following flake8 warnings:

support/testing/tests/fs/test_f2fs.py:6:1: E302 expected 2 blank lines, found 1
support/testing/tests/fs/test_f2fs.py:12:1: E302 expected 2 blank lines, found 1
support/testing/tests/fs/test_f2fs.py:38:23: E225 missing whitespace around operator

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

.gitlab-ci.yml: update after addition of TestF2FS test case

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

twolame: fix static linking with libmagic

libmagic (from file package) already provides the buffer_init function
so to avoid a build failure for applications wanting to statically link
with twolame and libmagic (for example sox), rename buffer_init into
bitbuffer_init (also rename buffer_deinit into bitbuffer_deinit and
buffer_sstell into bitbuffer_sstell for consistency)

Fixes:
- http://autobuild.buildroot.org/results/b3fc62e7f372fe595966e84091c11ccdb4cfa77c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: bump version to 7.2.12

Changelog: http://www.php.net/ChangeLog-7.php#7.2.12

Rebased patch 0004 and updated license hash after white space removal:
https://github.com/php/php-src/commit/902d39a3a79c6efe93c8879575fdd5a759cf03de

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/samba4: bump version to 4.9.2

Release notes: https://www.samba.org/samba/history/samba-4.9.2.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: disable build of user guide

--disable-guides has been added since version 2.5.0:
https://github.com/wireshark/wireshark/commit/aa04d2355effb1cf611831b0a260cf1aff199b9a

Fixes:
- http://autobuild.buildroot.org/results/5ae6d46573942713687f4e659b3eaf0b768ebc71

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ell: new package

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: fix Config.in comment dependencies, add DEVELOPERS entry.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add test for the f2fs filesystem support

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

fs/f2fs: simplify overprovision option handling

Setting overprovision to 0 and omitting this option has exactly
the same effect.

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

fs/f2fs: add option to define list of hot file extensions

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

fs/f2fs: clarify help messages

For BR2_TARGET_ROOTFS_F2FS_COLD_FILES clarify that extension list must
be a coma separated.

For BR2_TARGET_ROOTFS_F2FS_OVERPROVISION clarify that the default
overprovision ratio is autocalculated according to the partition size.

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-crossbar: bump to version 18.11.1

Adjust patch to fit the new version.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-autobahn: bump to version 18.11.1

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/v4l2loopback: bump version to 0.12.0

Add license hash for COPYING file.

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

go: bump to v1.11.2

Bumps Golang host-go compiler to 1.11.2 release.

Add hash for LICENSE.

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add Christian Stewart for go

I am now maintaining / submitting regular patches for the Go toolchain as well.

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qt: disable static build for qt-zlib

Static build of applications using qt-zlib and zlib (such as mpv) will
fail because zlib and qt-zlib defines the same functions (inflateReset,
inflatePrime ...)

So add a dependency on !BR2_STATIC_LIBS on BR2_PACKAGE_QT_QTZLIB

Fixes:
- http://autobuild.buildroot.org/results/0be6e359d46a8a701006305c32b514687854b035

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

postgresql: security bump to version 11.1

Fixes the following security issue:

CVE-2018-16850: SQL injection in pg_upgrade and pg_dump, via CREATE TRIGGER
... REFERENCING

For more details, see the advisory:

https://www.postgresql.org/about/news/1905/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-requests: bump to version 2.20.1

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/alsa-lib: update upstream status of patches

The remaining two patches have been submitted upstream for inclusion,
so let's update their upstream status.

While at it, I update @free-electrons.com to @bootlin.com in the first
patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/alsa-lib: drop patch 0002-alsa-lib-provide-dummy-definitions-of-RTLD_-if-neces.patch

The description of this patch was no longer correct: it no longer
provided dummy definitions of RTLD_* macros since commit
ccad7db515fa79d2331e4e949aafb32eca0b5214 ("alsa-lib: bump to version
1.1.6"). All it did is make two <dlfcn.h> inclusions optional.

However, this is no longer needed, since the alsa-lib code base
contains four inclusions of <dlfcn.h>, which are all properly handled:

- include/local.h, the include is guarded by #ifdef HAVE_LIBDL

- modules/mixer/simple/sbasedl.c, modules are only built if
   BUILD_MODULES is enabled, and BUILD_MODULES is only enabled if
   HAVE_LIBDL is enabled

- src/mixer/simple_abst.c, this file is only built if BUILD_MODULES
   is enabled, which itself is only enabled if HAVE_LIBDL is enabled

- src/pcm/pcm_meter.c, this file is only built if
   BUILD_PCM_PLUGIN_METER is enabled, and this is not enabled if
   HAVE_LIBDL is not enabled.

Conclusion: the patch can be dropped. The third patch is renumbered as
appropriate.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/alsa-utils: re-enable in BR2_STATIC_LIBS configuration

In commit 4707383c5d501a9ad7698579e5d0a4e2ab758c7e ("alsa-utils: needs
dynamic library support"), we added a !BR2_STATIC_LIBS dependency
because topology/topology.c was including <dlfcn.h>.

However, it turns out that this include is not needed/used at all, so
we can instead drop it, and re-enable the package in BR2_STATIC_LIBS
configuration.

This was discovered when analyzing why we have
package/alsa-lib/0003-alsa-lib-conditionally-enable-libdl-in-AM_PATH_ALSA-.patch. This
patch fixes the AM_PATH_ALSA autoconf macro, used by alsa-utils, so
that ALSA_LIBS doesn't carry the -ldl option, fixing static-linking
scenarios. This patch had become useless since alsa-utils was no
longer available in BR2_STATIC_LIBS configuration.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fwts: Enable optional efi_runtime kernel module build

Firmware test suite does provides efi_runtime kernel module required
to run UEFI tests. So optionally enable this module build.

[Peter: fix -/_ in comment as suggested by Erico]
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-posix-ipc: enable also for python3

The python-posix-ipc package can be used both with python2 and python3.

Signed-off-by: Daniel Fahlgren <daniel@fahlgren.se>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bdwgc: update bdw-gc.pc to fix link with guile

When bdw-gc is linked with libatomic_ops, bdw-gc.pc must contain the
needed libraries (such as -latomic_ops) otherwise build of applications
such as guile will fail on link stage:

.libs/libguile_2.0_la-posix.o: In function `scm_tmpnam':
posix.c:(.text+0x2080): warning: the use of `tmpnam' is dangerous, better use `mkstemp'
CCLD guile
/home/buildroot/autobuild/run/instance-2/output/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libgc.so: undefined reference to `AO_fetch_compare_and_swap_emulation'
/home/buildroot/autobuild/run/instance-2/output/host/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libgc.so: undefined reference to `AO_store_full_emulation'

So set ATOMIC_OPS_LIBS to -latomic_ops when a system atomic_ops library
is used and use ATOMIC_OPS_LIBS in bdw-gc.pc.in

Fixes:
- http://autobuild.buildroot.org/results/2b23d445e57a5e0f417f5cb9417b0a668bb7bf1c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bind: security bump to version 9.11.5

Fixes the following security issues:

- CVE-2018-5738: Some versions of BIND can improperly permit recursive query
service to unauthorized clients

- CVE-2018-5740: A flaw in the "deny-answer-aliases" feature can cause an
INSIST assertion failure in named

For more details, see the release notes:

https://ftp.isc.org/isc/bind9/9.11.5/RELEASE-NOTES-bind-9.11.5.html

Drop patch 0003-Rename-ptrsize-to-ptr_size.patch as the uClibc-ng issue was
fixed upstream in commit 931fd627f6195 (mips: fix clashing symbols), which
is included in uclibc-1.0.12 (January 2016).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: take aer-inject

Tiago is leaving the company and is unlikely to have access to the hardware
required to test the package.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mmc-utils: add patch to fix build failure

Patch taken from:
- https://patchwork.kernel.org/patch/10654531/

Fixes:
- http://autobuild.buildroot.net/results/404bfbd095a7b80273391ea36ea81ba496164b80
- http://autobuild.buildroot.net/results/233ef5c00951b5be10a59408f4a8781ecc658d74
- http://autobuild.buildroot.net/results/eba3cf4ac21095bca5af2d5d1d69aca0c9098f9b

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

traceroute: fix 'no rule to make target -lm' error

Fix the following build error:

make[3]: *** No rule to make target '-lm', needed by 'traceroute'.

Fixes:
http://autobuild.buildroot.org/results/dde63672e1de1d4ba036331ab127ccc8ff044444
http://autobuild.buildroot.org/results/4efb67e6a29c3dd784676d30a1051f9f0c2a6c80
http://autobuild.buildroot.org/results/7ac23a3959aec22297695899c0f76dbbc4e114d3
And many more...

As explained by Arnout, this happens when host-make is built (E.G.  when
glibc is built on a machine with an old make version) because the traceroute
Makefiles have a target with a dependency on -lm, and make automatically will
look in make's $prefix/lib directory for libm.so / libm.a to satisfy this
dependency.  From the make info pages:

   When a prerequisite's name has the form '-lNAME', 'make' handles it
specially by searching for the file 'libNAME.so', and, if it is not
found, for the file 'libNAME.a' in the current directory, in directories
specified by matching 'vpath' search paths and the 'VPATH' search path,
and then in the directories '/lib', '/usr/lib', and 'PREFIX/lib'
(normally '/usr/local/lib', but MS-DOS/MS-Windows versions of 'make'
behave as if PREFIX is defined to be the root of the DJGPP installation
tree).

Our host-make is configured with prefix=$(HOST_DIR), and $(HOST_DIR)/lib
does not contain libm.so / libm.a, causing make to error out.

Work around it by pointing VPATH to $(STAGING_DIR)/usr/lib, so make will
find the (target) libm.so / libm.a.

[Peter: extend description based on Arnouts investigation]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: add snappy optional dependency

- Optional dependency to snappy has been added with version 2.4.0 and
https://github.com/wireshark/wireshark/commit/47649d1c7fb6ba48b805e19268a711404eb6908b
- Specify the path to found libssh as this is done for other options

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

wireshark: add lz4 optional dependency

- Optional dependency to lz4 has been added with version 2.4.0 and
https://github.com/wireshark/wireshark/commit/47649d1c7fb6ba48b805e19268a711404eb6908b
- Specify the path to found lz4 as this is done for other options

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

wireshark: add bcg729 optional dependency

- Optional dependency to bcg729 has been added with version 2.5.0 and
https://github.com/wireshark/wireshark/commit/3e54cabf8193e6a8cd607b1671defb8b6800b53d
- Specify the path to found bcg729 as this is done for other options

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

wireshark: add nghttp2 optional dependency

- Embedded nghttp2 code has been removed and an optional dependency to
nghttp2 has been added with version 2.4.0 and
https://github.com/wireshark/wireshark/commit/b1cc056b12702435f6ebdc6ba0a8e17a41e159a0
- Specify the path to found nghttp2 as this is done for other options

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

wireshark: add libxml2 optional dependency

Optional dependency to libxml2 has been added with version 2.4.0 and
https://github.com/wireshark/wireshark/commit/cfab5ef035db7be8502623af203ab3494a9200e3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

wireshark: bump to version 2.6.4

- Remove first patch (inet_pton test removed since version 2.5.0 and
  https://github.com/wireshark/wireshark/commit/12d63c428f973b1f7e04ad58d432d778e2035a9a)
- Remove second patch (already in version, since
  https://github.com/wireshark/wireshark/commit/3761ef378537f6a9e0424f7cbded7e7403ba425c)
- Remove WIRESHARK_AUTORECONF=yes as configure.ac is not patched anymore
- gcrypt is a mandatory dependency since version 2.4.0 and
  https://github.com/wireshark/wireshark/commit/6b84ddee83e70aff944da084129624226b7a32fa
- geoip support has been replaced by maxminddb since version 2.5.0 and
  https://github.com/wireshark/wireshark/commit/a1da75c554881667dd92e11f098630f2d604872b
- Drop includedir "hack", this is not needed anymore and wireshark is
  now installing files in target. With this hack, build fails on:
  wireshark: installs files in /home/fabrice/buildroot/output/target//home/fabrice/buildroot/output
  package/pkg-generic.mk:310: recipe for target '/home/fabrice/buildroot/output/build/wireshark-2.6.4/.stamp_target_installed' failed
- Disable all new optional features

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: keep optional dependencies alphabetic on Config.in name;
         add comment of libgcrypt -> libgpg-error dependency.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Config.in: security hardening: disable FORTIFY_SOURCE for gcc < 6

As reported in the bug report [1], gcc < 6 doesn't build when
FORTIFY_SOURCE is set to 1 or 2. The issue is related to the
upstream bug report [2] but the patch fixing the issue for gcc 6
has not been backported to earlier gcc versions.

Add a dependency on gcc at least version 6 to BR2_FORTIFY_SOURCE_1
and BR2_FORTIFY_SOURCE_2.

[1] https://bugs.busybox.net/show_bug.cgi?id=11476
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61164
[3] https://github.com/gcc-mirror/gcc/commit/55f12fce4ccf77513644a247f9c401a5b1fa2402

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Peter: only limit for internal toolchain as suggested by Matthew]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ifupdown-script: send current hostname in DHCP request

For the default (BR2_SYSTEM_DHCP) /etc/network/interfaces handling.

Both the "big" and busybox ifupdown variants pass the hostname argument to
the DHCP client through the shell, so we can use $() to expand to the
current hostname value.

Notice that this may not be handled by all DHCP clients.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ngrep: fix static build

Commit 54eeb08d6498e54cc77e212e4f9873b579f76638 wrongly replaced
`$(STAGING_DIR)/usr/bin/pcap-config --static --additional-libs` by
"$(STAGING_DIR)/usr/bin/pcap-config --static --additional-libs"

Fixes:
- http://autobuild.buildroot.org/results/3dd8c768beef075494d6be7eff4cbb57b5ec8a41

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

webkitgtk: disable JIT usage on MIPS32 R6

Currently JavaScriptCore does not support JIT on MIPS32 R6, so remove
it from the list of supported architectures. Reported upstream:

https://bugs.webkit.org/show_bug.cgi?id=191258

This fixes the following autobuilder failure:

http://autobuild.buildroot.net/results/eeaf3edbf6f5bf468b10adc3d053f703c6ceba96/

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ffmpeg: bump version to 3.4.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tor: bump version to 0.3.4.9

Release notes: https://blog.torproject.org/new-release-tor-0349

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ngrep: add optional dependency on libdnet

- Enable tcpkill based on libnet availability
- Add BSD-3-Clause for tcpkill, added in version 1.46 and
https://github.com/jpr5/ngrep/commit/f2a1f8b09194a8ab87787c1fdb60b968f5957c05

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ngrep: bump to version 1.47

- Switch site from sourceforge to github as there is no new releases on
  sourceforge and http://ngrep.sourceforge.net/ is redirected to
  https://github.com/jpr5/ngrep/
- Remove first patch, not needed since version 1.46 and
  https://github.com/jpr5/ngrep/commit/997c9d81d34d3a6646e6c5e363645015e644b3de
  as this commit added the support for system pcre
- Remove second patch, not needed since version 1.46 and
  https://github.com/jpr5/ngrep/commit/2d8fd9ac7ef1ac6947f738f6005e7b533654f331
- Remove third patch and LIBS=-lpcap -lpcre, not needed since 1.46 and
  https://github.com/jpr5/ngrep/commit/cca6e3121f2d80dd32a5a33dead9495fe40eed70
- LICENSE.txt has been renamed to LICENSE since version 1.47 and
  https://github.com/jpr5/ngrep/commit/3cb4c580a9de4afe11c2c17b0f354b59b74ae974
- Add an upstream patch to fix --enable-pcre: keep pcre as a mandatory
  dependency as this is the current behavior in version 1.45. PCRE will
  made optional in an other patch
- Remove --with-pcre which is not recognized anymore
- Add two other patches to fix --disable-tcpkill
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libssh2: fix static linking scenarios involving mbedtls

curl can be statically linked with mbedtls, in this case build will fail
on:
kex.c:(.text+0x1be0): undefined reference to `mbedtls_mpi_read_binary'

This is due to the fact that CURL_LIBRARIES does not contain mbedtls
library:
CURL_LIBRARIES:INTERNAL=curl;cares;ssh2;ssh2;z;ssl;crypto;z;z;crypto;z;z;ssl;z;z;crypto;z

even if libcurl.pc is correct:
Libs.private: -lcares -lssh2 -L/home/fabrice/buildroot/output/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -lssh2 /home/fabrice/buildroot/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libmbedcrypto.a /home/fabrice/buildroot/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libmbedcrypto.a -L/home/fabrice/buildroot/output/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -L/home/fabrice/buildroot/output/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -lz -lssl -lcrypto -lssl -lz -lz -lcrypto -lz -lz

This full library path is added by patch
0002-acinclude.m4-add-mbedtls-to-LIBS.patch on libssh2 so update it to
replace $LIBMBDEDCRYPTO by -lmbedcrypto

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>