git.libre-soc.org Git - buildroot.git/log

bluez5_utils: correct the experimental option text

In BlueZ 5.44 the --enable-experimental configure option only controls the
build of the Nokia OBEX PC Suite plugin. Correct the option prompt and help
text.

Cc: Marcin Bis <marcin@bis.org.pl>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bluez5_utils: allow install of deprecated tools

Since BlueZ 5.44 many command line tools are deprecated, among them
gatttool. Add an option to install these tools.

Remove the gatttool specific option, since it is redundant now.

Fixes:
http://autobuild.buildroot.net/results/ddb/ddb975c9e1475fee1da63cb21240d8d59b161076/
http://autobuild.buildroot.net/results/19a/19adc0aa5a7e48119ef4ba25ba0403867f74f678/
http://autobuild.buildroot.net/results/9bd/9bd8e13ddffdd0631ddca30ec40cc4664729b0cb/

Cc: Marcin Bis <marcin@bis.org.pl>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lttng-tools: disable on uClibc/musl

lttng-tools has been broken on uClibc/musl since a long time due to
dlmopen() and LM_ID_BASE not being implemented. The issue has been
reported to the upstream lttng developers more than two months ago [1],
and no fix has been provided. Therefore, it's time to disable it on
uClibc and musl.

Fixes:

  http://autobuild.buildroot.net/results/f9e82a87618bcdcd46d670697b5ac75836f7250d/
  (uclibc)

  http://autobuild.buildroot.net/results/cb0952483b580b053a585760e59d78d11f46fc60/
  (musl)

[1] https://lists.lttng.org/pipermail/lttng-dev/2017-February/026921.html

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: disallow selection of 2.27 on ARM/noMMU

binutils 2.27 triggers a segfault in elf2flt on ARM/noMMU. While Arnout
has identified a binutils 2.28 commit that can be backported on 2.27,
this commit is huge and we don't clearly understand the impact.

Since both binutils 2.26 and 2.28 are unaffected by this issue, we
simply disallow the selection of binutils 2.27 on ARM/noMMU, and default
to binutils 2.28.

Fixes:

http://autobuild.buildroot.net/results/e14cadb290b0b86cac12c4bfb681eb6eee9e6dea/
and lots of other similar ARM/Cortex-M4 failures

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-resty-http: correct license file path

LICENSE file is present in subdirectory.

Fixes:
http://autobuild.buildroot.net/results/d33/d33a322b4d2618b55849b5637082100702a91eea

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu: fix user mode emulation build on ARM

This commit adds a patch that adjusts how the mcontext structure is used
on ARM with a uClibc C library.

Fixes:

http://autobuild.buildroot.net/results/79900b22c190e883b6d9a3075e1286ec95840ae1/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libunwind: disable for x86 with musl

libunwind use sigreturn() and setcontext() while building for x86 [1]
but this function is not available with musl [2].

This throw a warning during libunwind build:
In file included from x86/Los-linux.c:4:0:
x86/Gos-linux.c: In function ‘_ULx86_local_resume’:
x86/Gos-linux.c:298:7: warning: implicit declaration of function ‘sigreturn’ [-Wimplicit-function-declaration]
sigreturn (sc);
^
But any program trying to link against libunwind-generic.so or
libunwind.so fail to build:
[...]/usr/lib/libunwind-generic.so: undefined reference to `sigreturn'
[...]/usr/lib/libunwind-generic.so: undefined reference to `setcontext'
collect2: error: ld returned 1 exit status

Disable libunwind for x86 target when musl is used.

Reported upstream by Waldemar [3]

[1] http://git.savannah.gnu.org/gitweb/?p=libunwind.git;a=blob;f=src/x86/Gos-linux.c;h=17aebc2974af50eb0bf8292689b2ed22a4c97866;hb=HEAD#l299
[2] http://openwall.com/lists/musl/2016/02/04/3
[3] http://lists.nongnu.org/archive/html/libunwind-devel/2017-04/msg00030.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/aubio: bump to version 0.4.5

Since aubio 0.4.4, the libsamplerate support require fftw
single precision mode [1].

[1] https://github.com/aubio/aubio/commit/8be88e77f5c275fdf4efc99ae182d14940948786

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libunwind: simplify architecture dependencies

BR2_ARM_CPU_HAS_ARM already embeddeds the fact that this is an ARM chip,
so (BR2_arm || BR2_armeb) is forcibly true when BR2_ARM_CPU_HAS_ARM is.

In other words, BR2_ARM_CPU_HAS_ARM can't be true unless either BR2_arm
or BR2_armeb itslef is true.

Simplify the logic accordingly.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nvidia-driver: bump version to 381.09

libnvidia-egl-wayland.so was renamed in upstream archive.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nvidia-driver: use http:// instead of ftp://

Fixes the download, which currently times out on http://.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: arc: Disable usage of atomic ops if hardware has no LLSC

Since uClibc-ng v1.0.20 we can force libc to either use llock/scond
instructions for atomic ops or if those are missing use kernel-assisted
emulation. By default atomics are used so we disable that feature in
libc if we build for a target without LLSC.

This allows us to build and use NPTL on ARC750 for example which was not
possible before.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

spidev_test: bump to version in Linux 4.10

spidev_test has further evolved after kernel version 3.15, which
is the most recent version that could be built in this package.
This change allows to build the latest version of spidev_test if
the toolchain's kernel header version allows it. In this way, when
building with a newer toolchain, we are able to benefit from the
added functionality offered by the newest version of the tool.

Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luvi: fix build with LuaJIT 2.0.5

Luvi got broken by the bump of LuaJIT from 2.0.4 to 2.0.5 due to a
hardcoded path.

Fixes:

http://autobuild.buildroot.net/results/3eef12dbe07fb375e87b2b2898dcc5ef0c11e7a5/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: add empty lines to .mk file

We usually have empty lines around multi-line variable definitions.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: only add -lintl for static builds

For dynamic library builds, it's not needed to pass it explicitly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: avoid conflict with util-linux fsck wrapper

The fsck wrapper from util-linux is better maintained, so it should be
preferred. In particular, systemd relies on features in the util-linux
fsck wrapper that don't exist in the e2fsprogs one. However, since
e2fsprogs depends on util-linux, the one from e2fsprogs currently has
precedence. So in order to have e2fsck from e2fsprogs and the fsck
wrapper from util-linux, we disable e2fsprogs' fsck if the one from
util-linux is selected.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
CC: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Arnout: don't add comment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: add explicit --enable/--disable configure options

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: don't split up the fuse2fs CONF_OPTS and DEPENDENCIES
handling]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: disable unneeded features for host

We don't need e2initrd_helper or the test I/O manager for the host, just
like we don't need it for the target.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: don't add --disable-rpath, since we *do* need rpath for the
host; otherwise we have to explicitly pass LD_LIBRARY_PATH to be able
to run tools linked with util-linux' libuuid/libblkid]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: add help text for all config options

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: refactor to fix conflicts with busybox and util-linux

So far we attempted to solve the conflicts between busybox and e2fsprogs
by removing busybox programs from /bin and /sbin, leaving the e2fsprogs
ones at /usr/bin and /usr/sbin. This fails with BR2_ROOTFS_MERGED_USR=y,
leading to situations like the one described in bug 9436.

We could provide a better solution by means of a fine-grained selection
of programs, like util-linux does, but this would require big changes in
e2fsprogs. So instead of resorting to dirty tricks we switch to a more
pragmatic approach:

- Drop all configs to select/deselect utilities without corresponding
  enable/disable options to the configure script. In other words, we
  always install the basic set of utilities.

- fsck has a configure option, so use it. Note that --enable-fsck is
  only about the wrapper, not about e2fsck.

- Install e2fsprogs utilities at /bin and /sbin, overriding the ones
  eventually installed by busybox.

- Let the e2fsprogs build system create the symlinks mkfs.ext2 -> mke2fs
  etc.  fsck.ext4dev and mkfs.ext4dev were dropped in version 1.43.4.

Notice that these changes do exactly the opposite of what is requested
in bug 9436. On the other hand the policy for e2fsprogs becomes coherent
with the one for util-linux: busybox never wins.

Fixes:
  https://bugs.busybox.net/show_bug.cgi?id=9436 (no fix, in fact)

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout:
- don't add 'default y' to resize2fs;
- don't install the host package in /bin instead of /usr/bin - we
   install everything under /usr (until /usr will be removed, soon)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-resty-http: new package

Signed-off-by: Semyon Kolganov <semenak94@mail.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: fix bfin compile error

Newer gcc requires even lower optimization, only with -O0 we
can successfully compile binutils for the target.

Fixes:
http://autobuild.buildroot.net/results/fb95cd7f7fcc532d036ed8f13853bc6f9a64d1b3

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-ipython: Reformat help text to avoid warnings

Reformat help text in Config.in to avoid warnings from
check-package. No content change intended.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-simplegeneric: fix description

Use the description from https://pypi.python.org/pypi/simplegeneric.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-simplegeneric: New package

Add 'simplegeneric'[1] package to Buildroot. Needed by IPython.

[1] https://pypi.python.org/pypi/simplegeneric

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: add entry in DEVELOPERS file, fix license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-decorator: new package

Add 'decorator'[1] package to Buildroot. Needed by 'traitlets'
package, which is added in the next patch.

[1] https://pypi.python.org/pypi/decorator

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: download from PyPi, add hash file, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rapidjson: needs C++ support

Fixes:

http://autobuild.buildroot.net/results/ac989c119e4ea90b8318795fe9cf8c3e9395a354/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libqmi: fix patch for canonicalize_file_name() issue

The patch added in commit c78b65c4f161ec101ff02880788ef22eb7c87d76 was
bogus: it adds some code conditionally on HAVE_CANONICALIZE_FILE_NAME
being undefined, but there is nothing that defines
HAVE_CANONICALIZE_FILE_NAME if canonicalize_file_name() is already
provided by the C library.

This commit fixes that by adding the appropriate autoconf check.

Fixes:

http://autobuild.buildroot.net/results/4f0eb2af09c92ff4cd7448211ffda432754d4e60/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-skin-confluence: new package

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- use SPDX license code
- license is GPL-2.0, not GPL-2.0+
- remove unused _CONF_OPTS variable]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ext2: add help text for BR2_TARGET_ROOTFS_EXT2_BLOCKS

Signed-off-by: J Evans <g4@novadsp.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libqmi: musl compat canonicalize_file_name

Adds an inline equivalent of canonicalize_file_name
using realpath().

Bug report (origin of this patch):
https://bugs.freedesktop.org/show_bug.cgi?id=99944

Resolves:
http://autobuild.buildroot.net/results/afa/afa4b97e012586585b11be1e70ed3c63a7c48a4d/

  CCLD     test-generated
  CCLD     test-utils
  CCLD     test-message
../../../src/libqmi-glib/.libs/libqmi-glib.so: undefined reference to `canonicalize_file_name'
collect2: error: ld returned 1 exit status
Makefile:440: recipe for target 'test-generated' failed

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: disable libfdt swig wrapper

The current tools build assumes the host system when trying to detect if
swig/python are present. It then uses those tools from the path.

The upstream RFC included this commit set's patch but offered up
discussion on how to cleanly introduce a better method for detecting
swig and using the tools. The tools build really needs to be sysroot
and prefix/host dir tools aware.

Upsteam submission for RFC:
https://lists.denx.de/pipermail/u-boot/2017-May/289520.html

Workaround for:
http://autobuild.buildroot.net/results/6d52ac8bb71012aea6fc4c679691b31a3366728b

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tinyxml2: fix build in static libs configuration

tinyxml2 can build both static and shared libraries. By default, only
shared library is built. Shared/static builds are controlled using
separate cmake flags BUILD_SHARED_LIBS and BUILD_STATIC_LIBS.

In static libs configuration, we internally pass -DBUILD_SHARED_LIBS=OFF
cmake flag to build system which disables both shared and static builds
of library, resulting in failures while linking executable with library.

So pass -DBUILD_STATIC_LIBS=ON cmake flag in case of static libs
configuration.

fixes:
http://autobuild.buildroot.net/results/d30/d301bcbe5db26068b35eaa94bd816ae8cf8ef2e1

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4,9,10}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: add raspberrypi3 64bits defconfig

This configuration builds a 64bit image for RaspberryPi 3.

The size of the ext4 filesystem has to be extended to fit the large amount
(~60MB) of kernel modules enabled in the defconfig.

[Peter: drop gcc version selection / glibc, explain ext4 size requirement]
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssh: add support for HW SSL engines

Enable support for OpenSSH to use a hardware SSL engine if
cryptodev-linux is included. Without this, OpenSSH uses only
OpenSSL software crypto implementation.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
CC: Baruch Siach <baruch@tkos.co.il>
CC: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpi-bt-firmware: new package

Add firmware file for the Raspberry Pi 3 and Zero W Bluetooth module.

Note that to successfully download the firmware bluez5_utils needs a patch[1].

Even though the firmware file name (BCM43430A1.hcd) only mentions the
Bluetooth module, it is most likely tailored for the Raspberry Pi boards.
Firmware for the same BT module on other boards look different. For this
reason the name of the package is rpi-bt-firmware.

[1] http://www.spinics.net/lists/linux-bluetooth/msg69470.html

[Peter: correct Config.in ordering]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

picocom: force target LDFLAGS

This allows a static build of picocom when BR2_STATIC_LIBS=y but the toolchain
provides static and shared libraries.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

picocom: bump to version 2.2

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dtc: bump version to 1.4.4

Adds overlay support.

Drop the non-upstreamed 0002-extra-cflags.patch and instead simply pass the
needed CFLAGS as make arguments. Passing the full upstream warning flags
are not important in the Buildroot context, so this is simpler than
maintaining a patch.

Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

empty: bump to version 0.6.20b

Drop upstream patch.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

moarvm: bump version to 2017.04

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rapidjson: switch to CMake

Upcoming Kodi v18 depends on RapidJSON and detects it by using pkg-conf:
https://github.com/xbmc/xbmc/blob/master/cmake/modules/FindRapidJSON.cmake#L13

Currently our package installs only the header files, but RapidJSON.pc
is also needed. Luckily this can be fixed by switching to CMake which
does the job, also add configure options to disable the CMake build of
executables.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: bump version to 2.4.13.2

Removed patch applied upstream:
https://github.com/opencv/opencv/commit/c7045184ce220a04796d8e9072ac42d2d362dc71

Renumbered remaining patches.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

daemon: new package

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/raspberrypi3: use correct CPU

We so far were using a Cortex-A7 as the CPU for the rpi3, as this was
the closest we had available, in 32-bit mode, to the real CPU used in
the rpi3.

But now we can also use the Cortex-A53 in 32-bit mode, so we use that,
which makes for an optimised build (A53 has an improved instruction set,
as compared to the A7).

Also drop the DTB overlay option, it defaults to 'y'.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcsv: new package

libcsv is a small, simple and fast CSV library written in pure
ANSI C89 that can read and write CSV data.

Signed-off-by: David Graziano <david.graziano@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-netaddr: change setup type to setuptools

The latest netaddr version switched to setuptools.

Fixes:

http://autobuild.buildroot.net/results/e9b/e9b0013abe7e866fd224593f90ec30bdc809151f

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luajit: bump to version 2.0.5

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/y*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter y in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter x in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/website: update for 2017.02.2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2017.02.2

[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 799aed7a181e82a6446403b7abe77119622a6779)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/w*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter w in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/v*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter v in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/u*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter u in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/t*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter t in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/s*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter s in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/r*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter r in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/q*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter q in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.4.x series to 4.4.65

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-header: bump to 4.11 kernel version

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: add 4.11.x choice for headers

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board: add stm32f429-disc1 config

This change renders the stm32f429discovery a bit more generic and reuse most
of its settings for the stm32f429-disc1 board.

Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fdk-aac: bump to version 0.1.5

Also, remove the compile flags to make it build
with GCC6 as it was added upstream

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/p*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter p in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/o*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter o in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/n*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter n in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/m*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter m in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/l*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter l in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/k*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter k in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/j*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter j in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/i*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter i in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

packages/g*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter g in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nanomsg: new package

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpir: fix build failure on MIPS

Fixes:

http://autobuild.buildroot.net/results/3de0ef545a7303ec6564ecf1a1da3dd539957ed4/

Signed-off-by: Semyon Kolganov <semenak94@mail.ru>
[Thomas: remove bogus PowerPC stuff, fix n64 specification, rework
commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: re-install prompt for optical drives

In 81c438aa (package/kodi: Rework audio encoder support), the prompt for
the optical drive support was dropped, on the assumption that such
support was only needed when an audio encoder was enabled.

However, support for optical drives is also required when, surprisingly,
one wants to read a DVD (and probably a BD as well, but this was not
tested by lack of hardware).

Re-instate the prompt, so one can enable optical drive support even when
no audio encoder enabled.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 4.11

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libpng: bump version to 1.6.29

Refactored patch 0002, added support for Intel SSE2.

Changelog:
https://sourceforge.net/p/libpng/code/ci/b363e01e6b5e865e536db62ca4480f3a2d4690bd/#diff-2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libpng: cleanup NEON support options

Suggested by Thomas:
http://lists.busybox.net/pipermail/buildroot/2017-April/189086.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ifupdown: wordexp is enabled in uClibc now

Package can now be used for uClibc toolchains.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

atest: wordexp is enabled in uClibc now

Package can now be used for uClibc toolchains.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "lvm2: disable build with uClibc-ng"

This reverts commit 66f136a9f64b880eefa769c1261916773d8f28c0.

Issue fixed with uClibc-ng update to 1.0.24.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

opencv3: bump version to 3.2.0

Also switch to the official GitHub.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

supertux: select BR2_PACKAGE_LIBCURL

libcurl is unconditionally added to the dependencies list in
supertux.mk. However libcurl is not selected in Config.in.

This patch fixes that.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: CodeSourcery MIPS update upstream URL

The current URL returns error 403: Forbidden, so switch to https.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: CodeSourcery ARM update upstream URL

The current URL returns error 403: Forbidden, so switch to https.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: CodeSourcery aarch64 update upstream URL

The current URL returns error 403: Forbidden, so switch to https.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump CodeSourcery NIOSII to 2017.05

Tested with qemu_nios2_10m50_defconfig and Qemu 2.9.0 release.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: CodeSourcery NIOSII update upstream URL

The current URL returns error 403: Forbidden, so switch to https.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tinyxml2: bump version to 4.0.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freetype: add upstream security fixes for CVE-2017-8105 and CVE-2017-8287

Add upstream post-2.7.1 commits (except for ChangeLog modifications) fixing
the following security issues:

CVE-2017-8105 - FreeType 2 before 2017-03-24 has an out-of-bounds write
caused by a heap-based buffer overflow related to the
t1_decoder_parse_charstrings function in psaux/t1decode.c.

CVE-2017-8287 - FreeType 2 before 2017-03-26 has an out-of-bounds write
caused by a heap-based buffer overflow related to the
t1_builder_close_contour function in psaux/psobjs.c.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: fix typos for libva/libvdpau dependencies

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11vnc: add dependency on libvncserver

x11vnc needs libvncserver, so select it explicitely.

Fixes:

http://autobuild.buildroot.net/results/34f8045e772b96293cc7d25bd61ac0aa5842824f/

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/expedite: fix build issue with gcc < 5

The code use for loop initial declarations which are only allowed in
C99 mode which is not the default C standard with gcc < 5.

This way of writing for loop was added by the latest commit and it is
not consistent with the rest of the code.
So revert to the C89 for loop syntax.

Reported upstream:
https://phab.enlightenment.org/T5440

Fixes:
http://autobuild.buildroot.net/results/ed8/ed840755e8e486e48eab8c13a8bb5e9a448199ce

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xenomai: update udev rules search path

The udev rules has been moved to kernel/cobalt/udev.

Fixes:
http://autobuild.buildroot.net/results/8eb/8eb4643faed523ffccd421f20c2955adfde634a6

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

aircrack-ng: requires C++

Fixes:
http://autobuild.buildroot.net/results/9b1/9b1cba480102746389e80b58c0e327b68a235a29/
http://autobuild.buildroot.net/results/f65/f65de186324e6c3cd689540a22fa46ae89afc8c8/
http://autobuild.buildroot.net/results/e02/e02e832a49972ba464f7749cb89d2b20b8df4484/

Cc: Laurent Cans <laurent.cans@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>