git.libre-soc.org Git - buildroot.git/log

vlc: explicitly disable opencv support

vlc can use opencv in video filters, but it requires a couple of
features enabled in opencv; so, simply force disabling opencv support.

Note that vlc does includes the legacy opencv/cv.h header, which pulls a
number of opencv's features (core, video, imgproc, ...).

Fixes:
http://autobuild.buildroot.org/results/39c/39c77ffb5a5599d0b09422433c747b2bac185c4f/
http://autobuild.buildroot.org/results/a79/a79b055da09e4d8ede263251df8461bc8a64569a/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beaglebone: add DT for BeagleBone Black

The devicetree data for BeagleBone Black is the am335x–boneblack.dts file
(includes "am33xx.dtsi" and "am335x-bone-common.dtsi")

BeagleBone White uses the am335x-bone.dts file.

Signed-off-by: Marcelo Gutiérrez <kuyurix@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: needs dependency on host-lua if Lua is selected

If Lua support is requested in VLC, its configure script tries to find the
luac byte compiler, which fails if host-lua is not yet built.

This can be easily reproduced by setting a minimal config with vlc and Lua
enabled, and running: 'make clean toolchain vlc'. Final output is:

checking for LUA... no
configure: WARNING: Package lua5.2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.2.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.2' found, trying lua 5.1 instead
checking for LUA... no
configure: WARNING: Package lua5.1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.1' found, trying lua >= 5.1 instead
checking for LUA... yes
checking for luac... no
configure: error: Could not find the LUA byte compiler.
make: *** [<buildroot>/output/build/vlc-2.1.2/.stamp_configured] Error 1

Fix this problem by setting host-lua as a dependency to vlc.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

opencv: always enable opencv_core module when opencv is enabled

It does not make much sense enabling opencv without its core module.

This configuration leads to build nothing (since all modules depend on
the core one), but install the configuration files (*.pc and *.cmake)
anyway.

This absurd situation may break the build-system of other packages
that would correctly find the *.pc (but does not check for the modules
they actually use), but would not build because of missing headers and
libraries.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jimtcl: don't attempt to handle ccache internally

jimtcl tries to use 'ccache' (a non-buildroot host version) which may not
exist on the host system. If ccache is enabled in buildroot, the compiler
used by jimtcl is:
ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc

If ccache is not present on the host, this results in the build error:

ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc
-D_GNU_SOURCE -Wall -I. -fpic -pipe -Os -c -o jim-subcmd.o jim-subcmd.c
make[1]: ccache: Command not found

This patch passes 'CCACHE=none' to the 'configure' script, disabling the
internal handling of ccache, so that ccache can be transparently passed
through CC.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: needs mmu

Fixes:
http://autobuild.buildroot.net/results/d2f/d2f673b71f771ab5a6435805e39338fd023f04c8/build-end.log

The complete log file says:
libMagickCore-6.Q16.so: undefined reference to `_fork'

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

feh: needs mmu

Fixes http://autobuild.buildroot.net/results/8f4/8f447412460e404aa723242dd8281b40317a017b/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

collectd: fix static linking

collectd-tg indirectly uses pthread, but forgets to link with -pthread.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

netsnmp: fix static linking with openssl

Fixes http://autobuild.buildroot.net/results/084/0845bde5d234bd00d23c7a1b7e18746882dcdde4/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: copy config file from configure iso patch step

The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:

    busybox copies its .config from the post-extract hook.
    linux copies its .config in the configure_cmds.
    uclibc copies its .config from the post-patch hook.

Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.

In a previous patch, the situation was already fixed for busybox. This patch
applies the same fix to uclibc: copy the config file from the configure
step, as linux is doing.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: copy config file from configure iso extract step

The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:

    busybox copies its .config from the post-extract hook.
    linux copies its .config in the configure_cmds.
    uclibc copies its .config from the post-patch hook.

Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.

For example, when setting a BUSYBOX_OVERRIDE_SRCDIR to a cleanly extracted
busybox tarball:

$ make busybox-dirclean busybox
rm -Rf [..]/output/build/busybox-custom
>>> busybox custom Syncing from source dir
>>> /home/tdescham/repo/contrib/busybox-1.21.1
rsync -au --exclude .svn --exclude .git --exclude .hg --exclude .bzr
            --exclude CVS /home/tdescham/repo/contrib/busybox-1.21.1/
            [..]/output/build/busybox-custom
>>> busybox custom Configuring
/bin/sed -i -e "/\\<CONFIG_NOMMU\\>/d"
                            [..]/output/build/busybox-custom/.config
/bin/sed: can't read [..]/output/build/busybox-custom/.config:
                                            No such file or directory
make: *** [[..]/output/build/busybox-custom/.stamp_configured] Error 2

This patch modifies busybox.mk to copy the config file from the configure
step instead, as linux is doing, and fixing the described scenario.

This fixes bug #5030: https://bugs.busybox.net/show_bug.cgi?id=5030

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/web: give a little bit more exposure to our Google+ page

Add a small icon that links the Buildroot home page to our Google+
page.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nut: disable parallel builds

The build system has a race condition causing build failure,
so ensure make -j1 is used.

Fixes:
http://autobuild.buildroot.net/results/0dd/0ddd856bcbec2db0500791fd428ba053d6e4fa1b/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nut: disable hal

[Peter: add to existing _CONF_OPT line as suggested by Yann]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

systemd: fix build with uClibc toolchains

Currently, the build of systemd is broken with the internal toolchain
backend, because we have uClibc patches that add support for
execvpe(), but we also have a patch for systemd that adds execvpe(),
which was added when the internal uClibc didn't support execvpe().

However, simply dropping the patch is not a solution, as it would
break the build of systemd with any other uClibc than the ones built
with Buildroot. For example, a Crosstool-NG uClibc toolchain would
fail.

Beyond this execvpe() problem, there are also other problems that
prevented systemd from being built with unpatched uClibc.

This patch does the following:

* Add sequence numbers of systemd patches.
* Regenerate them to avoid fuzz.
* Improve the uClibc compatibility patch so that it:
   - Detects whether execvpe() is available or not, and if not
     available provide an implementation.
   - Detects if dup3() is available or not, and if not available
     provide an implementation.
   - Detects if MSG_CMSG_CLOEXEC is defined or not, and if not, define
     it to the appropriate value.

This has been tested with uClibc internal toolchain, uClibc external
toolchain built with Buildroot, uClibc external toolchain built with
Crosstool-NG, and glibc external toolchain.

Fixes bug #6776.

Fixes:

  http://autobuild.buildroot.org/results/591/591c6055430da334bd1e46e7d01497add45da837/build-end.log
  http://autobuild.buildroot.org/results/e58/e5851939d2837d4e35a4c1d9ca6df3c93ed5a34b/build-end.log
  http://autobuild.buildroot.org/results/92e/92e4c40c69a3feb4046b2fe5a0d8c69d5a44a157/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trivial: update buildroot e-mail address to buildroot@buildroot.org

As the e-mail address buildroot@buildroot.org is now enabled, update the
e-mail addresses in the source tree from @uclibc.org and @busybox.net to our
own proper domain.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lxc: needs setns system call, disable on nios2

Fixes http://autobuild.buildroot.net/results/f59/f592a011321429426be81bd1ecf664ad9a2c0161/

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/elfutils: disable for avr32

Disable elfutils for avr32, because:
- elfutils uses canonicalize_file_name, which came after uClibc-0.9.31.
- avr32 uses a toolchain with uClibc-0.9.31

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boost: test module uses fork()

Fixes http://autobuild.buildroot.net/results/17dd7946631354d59336259d5f31aa899e3599b8/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

coreutils: correct next version in patch description

The patch that commit a728e2fe35 (coreutils: fix build against uclibc
snapshot) adds mentions the wrong coreutils version in its description.

Also fix the sign-of tag while at it.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: xtensa: fix __builtin_frame_address use with shared libgcc

The xtensa port uses __xtensa_libgcc_window_spill in libgcc to implement
__builtin_frame_address. This symbol is local/hidden in libgcc. This is not a
problem when linking against static libgcc. But g++ defaults to
-shared-libgcc, thus breaking link against C++ shared libraries that are using
__builtin_frame_address as follows:

ld: test: hidden symbol `__xtensa_libgcc_window_spill' in .../libgcc.a(lib2funcs.o) is referenced by DSO

Add upstream patches that make libgcc_s.so a linker script that links in
unresolved symbols from the static libgcc, similar to the ARM and PowerPC
ports.

Fixes:
http://autobuild.buildroot.net/results/e2d/e2d1a763fa86b8575e2e48e6d73c018175f43e7c/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

coreutils: fix build against uclibc snapshot

uClibc development version adds support for POSIX spawn routines. However,
unlike glibc these routines are in librt. This breaks gnulib autoconf
detection. Teach gnulib autoconf to look for POSIX spawn in librt.

Fixes:
http://autobuild.buildroot.net/results/246/246b3778a1a646afd1c8b9c17b4579fb5a27120e/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-libav: fix build for xtensa

gst1-libav needs the same fix for xtensa like ffmpeg got in commit
4ec35e76b8a3 (ffmpeg: fix build for xtensa).

Fixes:
http://autobuild.buildroot.net/results/33f/33fcbb79809719f68f3ee2cdb0fcacad82b9e0eb/

[Peter: pass the correct flags, not the ones from ffmpeg]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iozone: needs thread support in toolchain

Fixes:

http://autobuild.buildroot.org/results/2a3/2a33d2c7535a9d867d76dd5cf05e1bcc3f5cdc38//

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/news.html: add 2014.02-rc1 announcement link

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: ensure SHA passwords are supported if used

As reported on IRC, our default busybox configuration doesn't support SHA
encoded passwords, breaking login if enabled under system configuration.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2014.02-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sdl: fix autoreconf timing issue

Context:
The autobuilders were failing on the symbol _XData32 being in conflicts.
A patch had been added to SDL to add a check to the configure.in

Problem:
Sometimes, the build would fail, because of an _XData32 symbol being in
conflicts eventhrough the patch was here.

What was happening:
Following the classic buildroot workflow:
   - Extract
   - [...]
   - Apply 001 patch, which touches configure.in AND configure
   - Apply 002 patch, which touches configure.in
   - Invoke autogen.sh
   - [...]

Right before running autogen.sh, we have configure.in which is more
recent than configure, which is fine.
We then, execute autogen.sh which, basically, runs autoconf.

If your machine was lighty loaded, the time difference between
configure.in and configure was really tiny (ms order), which seems to be
neglected by autoconf.
The results was that the configure was *NOT* generated. And our second
patch was not taken into account.

If your machine was under heavy load, the time difference between the
two files would have been greater and then *maybe* picked up by
autoconf. And then the configure file was re-generated.

When the 0001 patch was introduced, SDL package did *NOT* run it's
autogen.sh, which is why it touches also the configure.
This came later, causing this behavior.

Fixes:
  http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigsegv: disable for ARC

Fixes http://autobuild.buildroot.net/results/5cd/5cd051937a9471f7fb47363e868cb4b61d788d75/build-end.log

The ARC uClibc port doesn't provide ucontext_i.sym file required to enable
context manipulation routines that libsigsegv needs.

Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpcbind: uses fork(), needs MMU

Fixes:

http://autobuild.buildroot.net/results/d7c/d7c788749b54275154cc3934a7a32385cd72be61/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile.legacy: fix recursive invocation with BUILDROOT_DL_DIR and _CONFIG

The legacy support for the old BUILDROOT_DL_DIR and BUILDROOT_CONFIG
breaks down when make is invoked recursively - which is done in a few
cases, e.g. silentoldconfig, external-defs, ... These targets always
give a legacy error.

For BUILDROOT_DL_DIR, this is fixed by making sure that the original
value of BR2_DL_DIR taken from the environment is also exported again.

For BUILDROOT_CONFIG, this is fixed with an additional comparison of
the environment variable's value with the fake value that we introduce
ourselves.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jpeg-turbo: fix "jpegtran" spelling in target-install hook

Use correct bin name so that JPEG_TURBO_REMOVE_USELESS_TOOLS fixup
actually removes it.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libjpeg: fix "jpegtran" spelling in target-install hook

Use correct bin name so that LIBJPEG_REMOVE_USELESS_TOOLS fixup
actually removes it.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/raspberrypi: remove packages not strictly required

rpi-userland and libcoffi are not strictly required to boot up the
Raspberry Pi, so remove them from the defconfig.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/raspberrypi: bump kernel version

Bump from rpi-3.10.27 to rpi-3.10.29.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cpanminus: remove it

cpanminus was marked as broken, now it becomes useless with the Perl infrastructure.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

perl: remove useless patch

The Perl infrastructure uses a host version of Module-Build
(see previous commit "host-perl-module-build: new package").
The target version is never used, so no need to patch it.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

host-perl: export and rename PERL5LIB

The official Perl documentation refers only to PERL5LIB.
PERLLIB is obsolete, we don't need to be compatible with Perl4.

PERL5LIB is used in all environment, so it is simpler to just export it.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beaglebone: change to zImage

The default U-Boot configuration is now to use a zImage instead of uImage.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beaglebone: update to latest U-Boot

Update to the default version of U-Boot, at this time 2013.10.

Tested with an old uEnv.txt (i.e. using uImage) and with the
currently prefered zImage.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

am33x-cm3: update to latest version

This goes hand-in-hand with the kernel update.
The version is taken from meta-ti.

The new kernel version, 3.12, requires a newer PM FW.

This should correspond to v05.00.00.02, though that tag
has not been pushed...

Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beaglebone: update to TI 3.12 kernel

Git repo version is taken from meta-ti.
It's a 3.12.10 kernel with TI's own patches on top.

The defconfig has been kept rather close to our old defconfig.
The kernel has been boot-tested using an NFS-root.

Apart from the kernel change, the linux headers has also been
updated from 3.8.12 to 3.12.10.

[Peter: drop UEVENT_HELPER_PATH setting]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

madplay: fixes build when toolchain has locale support

Otherwise build fails in intl/relocatable.c with:
./relocatable.c: In function 'libintl_relocate':
./relocatable.c:402:40: error: 'INSTALLPREFIX' undeclared (first use in this function)
./relocatable.c:402:40: note: each undeclared identifier is reported only once for each function it appears in

[Peter: drop redundant 'else' part]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtorrent: disable on ARC arch

Libtorrent has dependencies on atomic operations. However ARC GCC doesn't
implement those at the moment so package should be disabled. Rtorrent
depends on libtorrent.

This fixes:
http://autobuild.buildroot.net/results/51414e22c8ea47c38df20d864526a370c5a895d7/

Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

barebox: bump to version 2014.02.0

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/news.html: add report from FOSDEM meeting

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: don't automatically set uevent_helper with mdev /dev management

When mdev /dev management is chosen in the buildroot configuration, the
Linux configuration is updated automatically to set option
CONFIG_UEVENT_HELPER_PATH to "/sbin/mdev". However, the help text of this
option explicitly recommends not setting this option due to large
performance impact during boot (experienced first hand by the reporter ánd
author).

The mdev startup script S10mdev already sets the helper during userspace
boot, which will make sure mdev is working correctly.

Fixes bug #6596: https://bugs.busybox.net/show_bug.cgi?id=6596

Reported-by: Andreas Koop <andreas.koop@zf.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: replace BUILDROOT_CONFIG with BR2_CONFIG

To make the naming consistent (all user-visible options should be
prefixed with BR2_).

An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIG but not BR2_CONFIG.

Still export BUILDROOT_CONFIG but pointing to some phony value, to
make sure that scripts that still use it fail in a predictable way.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix typo when setting VLC_CONF_ENV

Fixes:
http://autobuild.buildroot.org/results/917/917c26656557d50f869639162ec7e9d0f3399824/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix glx support

glx support is provided by the mesa3d package; so, enable it only when
mesa3d is part of the package selection.

Fixes:
http://autobuild.buildroot.org/results/9b4/9b46021ea0064850ce8f1adcb5455d6da5bff459/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kexec: fix build failure

Add patch retrived from upstream and fixing undefined bzImage_support_efi_boot
build failure.

Fixes:
http://autobuild.buildroot.org/results/c35/c3525dd25a37db7a976c7019901160e449363b5d/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kexec: rename patch to add sequence number

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trace-cmd: needs mmu

Fixes:
http://autobuild.buildroot.net/results/0b7/0b73c684b3d7edcd818cb113fda534e552028d58/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trace-cmd: disable on avr32

AVR32 does not have TLS support.

Fixes:
http://autobuild.buildroot.net/results/e24/e24af3ceb125da50f0f5cbffb0e3ca091c68af33/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: replace BUILDROOT_DL_DIR with BR2_DL_DIR.

To make the naming consistent (all user-visible options should be
prefixed BR2_).

An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_DL_DIR but not BR2_DL_DIR.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kmod: really pass --disable-manpages

The line below overwrites KMOD_CONF_OPT, so move the --disable-manpages
options below.

Fixes http://autobuild.buildroot.net/results/842/842131307c171e1bc5a1e918996d53b00ddb1be3/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-autotools: fixup pkg_CONFIGURE_CMDS after DISABLE_DOCUMENTATION removal

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: remove separate definition of DISABLE_DOCUMENTATION

Since we now always disable documentation on target, there is no need to
have a separate variable DISABLE_DOCUMENTATION anymore.

Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kernel-headers: remove deprecated versions 3.1, 3.3, 3.5

The Linux kernel headers versions 3.1, 3.3, and 3.5 have been deprecated
since 2013.02 and thus can be removed in 2014.02.
For legacy handling, we automatically select versions 3.2, 3.4, and 3.6,
respectively.

Additionally, this patch removes the now unused symbol
BR2_DEPRECATED_SINCE_2013_02.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: remove deprecated versions 7.2.x and 7.3.x

Gdb versions 7.2.x and 7.3.x have been deprecated since 2013.02 and thus can
be removed in 2014.02.
For legacy handling, version 7.5.x is automatically selected.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccache: remove deprecated target package

The ccache target package has been deprecated since 2013.02 and thus can be
removed in 2014.02. This does not change anything about host ccache (used
for speeding up builds).

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

packages: remove support for documentation on target

This patch removes deprecated symbol BR2_HAVE_DOCUMENTATION and all its
usage. Additionally, it removes the now unused BR2_DEPRECATED_SINCE_2012_11.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

automake: remove deprecated target package

The automake support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host automake support.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

autoconf: remove deprecated target package

The autoconf support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host autoconf support.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xstroke: remove deprecated package

xstroke has been deprecated since 2013.02 and thus can be removed in
2014.02.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/squashfs: add selection for the host variant

If any of the post-image scripts wants to handle squashfs filesystems,
we need to expose an option for squashfs-tools to be user-selectable.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kexec: bump to 2.0.5

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: move version selection from gdb.mk to Config.in.host

This avoids duplication of the version selection between these two files.

Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

snmppp: bump to version 3.3.3

Changes snmp++v3.3.3

====================

- Fixed: [APP-30] SNMP++ cannot BER decode Oids starting with 2 and
with second sub-identifier >39 correctly.
- Fixed: [APP-31] SNMP++ does not encode Oids starting with 2 and
second sub-ID greater than 47 correctly.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysstat: bump to version 10.2.1

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs/ubi: add option to use custom ubinize config file

By default, the UBI FS target creates a ubinize configuration
file on-the-fly, for a single volume. Add an option to specify
a custom config file.

E.g., one might want to deploy a system with a volume for the
built ubifs image, a volume for a future upgrade image, and a
volume for user data.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: disable for microblaze arch

gpsd will fail on an internal compiler error for the microblaze
architecture so disabling it on that architecture.

Fixes:
http://autobuild.buildroot.org/results/42d/42da870722f24e4202d8265597771a0449e74cfd

[Peter: add comment explaining why]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dmraid: disable on ARC arch

The ARC compiler has an internal failure while compiling this package
so disable this package for this architecture.

Fixes:
http://autobuild.buildroot.net/results/ef6/ef6a0e2d382ae202bb8f0e9fc9f5e48c90119faf

[Peter: add comment explaining why]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "util-linux: add nsenter option"

This reverts commit 9f91d79601da42516752318beecfd080dc05aac9.

Not all toolchains have setns(), and the configure script automatically
enables nsenter if it does, so get rid of the explicit option.

See http://lists.busybox.net/pipermail/buildroot/2014-February/088669.html
for details.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

apply-patches.sh: make scan_patchdir work recursively

scan_patchdir is called recursively. For this to work properly, the
variable path which is set to $1 at the very beginning must be local not
global.

A test case is to set BR2_GLOBAL_PATCH_DIR to 'mypatches' and having the
following tree in the buildroot root:

$ find mypatches/
mypatches/
mypatches/busybox
mypatches/busybox/subdir.patch
mypatches/busybox/subdir.patch/busybox-0001-abc.patch
mypatches/busybox/busybox-0002-def.patch
mypatches/busybox/asubdir.patch
mypatches/busybox/asubdir.patch/busybox-0003-xyz.patch

When running 'make busybox-dirclean busybox-patch' originally, you'd get:

    Applying busybox-0003-xyz.patch using patch:

    Applying busybox-0002-def.patch using patch:
    Error: missing patch file
    mypatches/busybox/asubdir.patch/busybox-0002-def.patch

While with this fix:

    Applying busybox-0003-xyz.patch using patch:

    Applying busybox-0002-def.patch using patch:

    Applying busybox-0001-abc.patch using patch:

This fixes bug #6434 (https://bugs.busybox.net/show_bug.cgi?id=6434)

Signed-off-by: Daniel Mentz <daniel@exxm.de>
[Thomas: update commit message with test case]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: $(BR2_EXTERNAL)/{Config.in, external.mk} are mandatory

The manual is a bit vague about whether Config.in and external.mk
are mandatory or optional.

Make it explicit in the manual that they are mandatory.

Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: enable altivec support only when appropriate

All PowerPC CPUs do not support altivec instruction set; so enable its
support only when the sub-architecture support it.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix sdl support

sdl video output module includes xlib headers, so it requires
xlib_libx11 to be available.

Fixes:
http://autobuild.buildroot.org/results/d41/d41d2f36a4384289e300a3cf91d51960df9fab00/build-end.log

[Peter: check for SDL X11 backend instead]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix libgcrypt support

This patch allows to override the libgcrypt-config location instead of
using the one found in the PATH, which is usually the host system one.

Fixes:
http://autobuild.buildroot.org/results/5e4/5e42d1139bbbed2421193d8acc52df9442c43730/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix live555 support

vlc looks for a *.pc file which is not provided by the live555 package.
So, instead, we explicitly set the LIVE555_CFLAGS and LIVE555_LIBS
variables.

Fixes:
http://autobuild.buildroot.org/results/b59/b5972ecad4e5004dc23a2366066ce45346994f58/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix bonjour support

bonjour support checks for avahi-client, which requires avahi-daemon and
dbus enabled.

Fixes:
http://autobuild.buildroot.org/results/f8b/f8bed9a42f1853db8aa81161d7be5a7cb67afe8f/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix svg support

In vlc, svg support is done using librsvg, not libsvg.

Fixes:
http://autobuild.buildroot.org/results/344/344af6e756a5f2c1ee515a355ae5b288401c4c71/build-end.log
http://autobuild.buildroot.org/results/19f/19f1450ed5453aa666bc7aae2e965ad81e5f845d/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

apf27: bump kernel version to 3.13.2

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

defconfigs: zedboard add info about uboot installation

Add info about how to install a custom uboot on the zedboard.

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

joe: needs mmu

Fixes:
http://autobuild.buildroot.net/results/f92/f920c85244afffe38497459753bf005946001d0d/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: fix vorbis build failure

Forcibly disable the vorbis encoder support when the vorbis option isn't
enabled to avoid autodetection.
Said autodetection has a build bug that it won't properly set libvorbis
build options when the decoder is disabled. Fixes:
http://autobuild.buildroot.net/results/a46/a46b4c97fe126b23a96051a8bf1243a7f4935434/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "opencv: cleanup depends and comments"

This reverts commit 5f7cbb264ec21f75320ad8518d27f4c605c825f8.

Buildroot policy is to keep the dependencies / comments for sub options in
case the package in the future no longer has those dependencies.

See http://lists.busybox.net/pipermail/buildroot/2014-February/088523.html
for details.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

open2300: fix build failure

This patch fixes the open2300's build-system, which is a handwritten
Makefile, by removing the hard-coded include and library locations and
making them pointing to the systroot.

Fixes:
http://autobuild.buildroot.org/results/072/0724ffa1355f5564b1fcd9d6e3c9ff2162d20f44/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc/Config.in: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

zedboard: add Avnet Zedboard support.

[Thomas: update to recent Buildroot which had renamed several
Config.in options, lock down kernel headers version]

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/weston: un-break the rpi-compositor

The rpi-compositor was broken with the 1.4.0 release,
but we now have a fix from upstream.

Add this patch, and remove the 'depends on BROKEN'.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mmc-utils: fix linux headers issue before 3-4

With toolchains that include linux kernel headers before the 3.4 kernel,
an issue exists with linux/mmc/ioctl.h in that it doesn't include
linux/types.h.

Merged the patch with an existing patch for mmc-utils as it modifies
the same file and fixes similar issues. Also updated the patch to
conform to the buildroot patch naming standard.

Fixes:
http://autobuild.buildroot.net/results/828/828c7a686736710c4fcb152230d0fa6b5f4d6ad3

Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump to version 3.13.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{4, 10, 12, 13}.x stable versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dependencies.sh: cleanup dependencies.sh

Cleanup mixed indents and remove commented lines.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dependencies.sh: stop stray a.out being created for ia32 compiler test

If the grub package is selected it also selects
BR2_HOSTARCH_NEEDS_IA32_COMPILER.  This triggers a test in dependencies.sh
to verify the host compiler can build 32 bit executables.  Currently this
test does not set any output for the compiler which causes a stray a.out
to be create outside the output directory.  This patch sets the compiler
output to /dev/null so no a.out is created but the test is still performed.

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>