git.libre-soc.org Git - buildroot.git/log

package/libcdaudio: fix build with toolchains lacking C++ support

When the target toolchain does not support C++, the provided
libcdaudio configure script tries to run a check with the C++
pre-processor provided by the host (/lib/cpp) which may not exist on
some systems.

This issue is fixed by autoreconfiguring the package, as newly
generated configure scripts do not have this issue.

Fixes:

http://autobuild.buildroot.net/results/f725a41ef992c42ceef7514d1a8dcac99e6b9114/

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/test-pkg: clean output dir for successful builds

test-pkg will use gigabytes of space when testing all toolchains.
Nevertheless, you are normally only interested in the actual build / host
tree when there is a build failure.

Do a 'make clean' for successful builds to save disk space, unless the new
option '-k/--keep' is set.
Note that the logfile and configuration is always retained for inspection.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/test-pkg: fix long option parsing

The long option parsing of test-pkg is broken because:
- some long options are not declared
- there should be a comma between long options, the colon does not replace
it.

This change also revealed that the declaration of 'toolchains-dir' should
have been 'toolchains-csv', originally introduced in commit ed59f81a3cb4ddb.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-firmware: add options for MT7650/MT76x2e firmware

Add options to install the MT7650 bluetooth firmware and the MT76x2e
wifi firmware.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rauc: allow use of host-libp11 for crypto hardware support in host-rauc

To use a private key stored on a hardware crypto module, such as an HSM
or smart card, rauc needs OpenSSL to have support for pkcs11 modules.
OpenSSL achieves this through the libp11 library.

The libp11 engine for OpenSSL is a dynamic module, so the dependency is
at rauc's runtime, rather than openssl's or rauc's build time. However,
it still needs to be added as a dependency, so that anything that uses
host-rauc when building can be assured that host-rauc is fully
functional.

As this is a runtime dependency, there's no need for a target
dependency. And it's only used for signing updates, which isn't done on
the target anyway.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/imagemagick: add optional SVG support to host variant

SVG can be regarded as the "source code" for assets, like logos or other
graphical elements.

However, SVG needs to be rendered, which requires an XML parser and an
SVG "parser/rendered". As such, it has various runtime impacts, like
bad performance or security. As such, SVG are often pre-rendered to the
required sizes/depths/resolutions into other format, such as PNG, at
build time.

While rsvg-convert (from host-librsvg) would allow the rendering, it
does not allow more complex tasks taht ImageMagick allows for:
compositing more than one image, 2D transforamtions (rotation, skew...).

Yet, SVG support in ImageMagick relies on librsvg, which adds quite a
few dependencies, and thus has a noticeable impact on the build time.

Add an option to allow concerned users to enable/disable SVG support
in ImageMagick.

Enabling SVG support relies on librsvg, which in turns relies on a few
additional packages that ImageMagick can also optionally use. So,
automatically enable the corresponding support as well.

Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/imagemagick: add prompt for host variant

Sometimes, it is required to call imagemagick from a post-build script
or the likes, so we have to allow the user to enable the host variant
for imagemagick.

Update the linux package to select the host variant now.

Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/arcturus_ucp1020: bump Linux and U-Boot

Bump Linux and U-Boot versions.

The Linux configuration file and patches are no longer needed.

Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
[Thomas: also use a tarball for U-Boot.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libiio: bump to version 0.18

See https://github.com/analogdevicesinc/libiio/releases

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python3: drop unrecognized option

--enable-old-stdlib-cache is not recognozed since at least version
3.6.3, see:
http://autobuild.buildroot.org/results/b957f956100fc36c7d5ffab1d7df41a65ae52ded

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/util-linux: minix needs MMU

Fixes:
- http://autobuild.buildroot.org/results/87801e1a3c628e00ccb0c57afc2b46cc735c6018

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rtmpdump: bump version

Added tarball and license hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mjpg-streamer: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xapp_sessreg: bump version to 1.1.2

Removed patch which was applied upstream:
https://gitlab.freedesktop.org/xorg/app/sessreg/commit/5b403d124c32c20fddc73bc5ae3c7e1febdf1bc4

Added all hashes provided by upstream, added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xapp_xcalc: bump version to 1.1.0

Switched _SITE to https.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xlib_libX11: bump version to 1.6.8

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xfont_encodings: bump version to 1.0.5

Added all hashes provided by upstream, added license hash.

Switched _SITE to https.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xlib_libXi: bump version to 1.7.10

Added all hashes provided by upstream, added license hash.

Switched _SITE to https.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libvncserver: fix build without C++

Fixes:
- http://autobuild.buildroot.org/results/16aaa4e86a2dbf1acf95f10d5131b0f7b8a3d61a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xorgproto: enable legacy

xproxymngproto is needed by xfindproxy but it is now disabled by default
Enable it thanks to --enable-legacy

Fixes:
- http://autobuild.buildroot.org/results/4b21400c36e8ba7a8222f9da962f79e42c6146d3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/harfbuzz: fix build with cairo

harfbuzz needs svg support on cairo

Fixes:
- http://autobuild.buildroot.org/results/f6c0b85fa476e0f52cc06f0133d2e4f9920f7556

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/mv-ddr-marvell: fix build with GCC 8

Add upstream patch fixing a build warning that is considered as error.

Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/efivar: bump version to 37

Backport patches required to build with gcc-9.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/whois: bump to version 5.4.3

See changelog:
- https://github.com/rfc1036/whois/blob/master/debian/changelog

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/monit: bump to version 5.25.3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: switch to gcc 8.x as the default

Even if gcc 7 is still maintained for some time (gcc 7.5 is pending),
switch to gcc 8.x since it has been released since 2018-05-02 and
gcc 9.x is available since 2019-05-03.

We have been having toolchains in the autobuilders with gcc
8.x for a while, so the vast majority of the problems should have
already been solved.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: add gcc 9 entry

This patch allows to use an external toolchain based on gcc 9.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch: add BR2_ARCH_NEEDS_GCC_AT_LEAST_9

This new symbol will be used by architectures introduced with gcc 9 and
by external toolchains based on gcc 9.

[1] https://gcc.gnu.org/gcc-9/changes.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: add support for gcc 9.1

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Thomas: don't allow gcc 9.x for powerpc spe]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: add gcc 9 entry

In order to add gcc 9 support for internal and external toolchain in
follow-up commits, introduce BR2_TOOLCHAIN_GCC_AT_LEAST_9 symbol.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uclibc: backport patch to remove asm constraint on sparc

uClibc-ng don't build with gcc 9.1 [1] on sparc due to a new check
that "catch illegal asm constraint usage" [2]. This issue has been
fixed in upstream uclibc-ng, so we simply backport the fix.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Thomas: backport the patch that was applied to upstream uclibc-ng]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: disable Werror for powerpc kernels

>From patch [1] included in kernel >= 5.0:
"The upcoming GCC 9 release extends the -Wmissing-attributes warnings
(enabled by -Wall) to C and aliases: it warns when particular function
attributes are missing in the aliases but not in their target.

In particular, it triggers for all the init/cleanup_module
aliases in the kernel (defined by the module_init/exit macros),
ending up being very noisy.

These aliases point to the __init/__exit functions of a module,
which are defined as __cold (among other attributes). However,
the aliases themselves do not have the __cold attribute.

Since the compiler behaves differently when compiling a __cold
function as well as when compiling paths leading to calls
to __cold functions, the warning is trying to point out
the possibly-forgotten attribute in the alias."

Werror is set by default while building ppc kernel [2], but
some warning can be introduced while building current kernel with
newer compiler (for example building kernel 4.19 with gcc 9.1).

For the same reason why we remove Werror in packages's compiler
flags. Building with Werror is not bulletproof when we start
using a newer compiler that introduce new warnings.
This is the case here.

Also this option is a bit strange since it's specific to ppc kernels:
"The intention is to make it harder for people to inadvertantly
introduce warnings in the arch/powerpc code."
Other kernel developers on other arch may be interested by a
similar/more generic option.

So, It's clearly intended for kernel developers.

Instead of backporting this patch [1] to kernel 4.19, select
unconditionally the Kconfig option CONFIG_PPC_DISABLE_WERROR
that allow to disable Werror.

Fixes:
https://gitlab.com/kubu93/toolchains-builder/-/jobs/205435741

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=a6e60d84989fa0e91db7f236eda40453b0e44afa
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=ba55bd74360ea4b8b95e73ed79474d37ff482b36
[3] https://gitlab.com/bootlin/toolchains-builder

Fix-suggested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libtorrent-rasterbar: work around gcc bug 85180

On Microblaze, building libtorrent-rasterbar with gcc version < 8.x
and optimization enabled causes gcc to enter an infinite loop and
hangs the build.

This is due to gcc bug 85180
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180).

The bug shows up when building libtorrent-rasterbar with optimization
but not when building with -O0. To work around this, if
BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y we force using -O0.

Fixes:
http://autobuild.buildroot.net/results/410/410e75676abc6bbabe9029ecda969e3d909f3e18/

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5base: work around gcc bug 90620

On Microblaze, with gcc versions <= 9.x and optimization enabled, the
build fails with:

internal compiler error: in do_output_reload, at reload1.c:7978

This is due to gcc bug 90620
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90620). The bug shows up
when building qt5base (or other qt5 modules) with optimization but not
when building with -O0. To work around this bug, if
BR2_TOOLCHAIN_HAS_GCC_BUG_90620=y we force using -O0.

Fixes:
http://autobuild.buildroot.net/results/4e5/4e563f5fc38ec681a730a576c5f056bc092db74e/
http://autobuild.buildroot.net/results/348/3482bd950c7ab5608666807a7ab7ea857c767333/
http://autobuild.buildroot.net/results/835/8351e3fbd6a39d05da6a6e7a978329d718dfc109/

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: gcc bug 90620 has not been fixed in gcc 8.x

gcc bug 90620 appears with gcc 8.x so remove the version check
dependency and keep only the BR2_microblaze one.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5base: disable predefined -Og optimization

Starting from Qt5 5.9.0, -optimize-debug is enabled by default for
debug builds causing -Og flag to be appended to CFLAGS and
consequently override TARGET_CFLAGS. We don't want this so let's pass
-no-optimize-debug to QT5BASE_CONFIGURE_OPTS if QT5_VERSION_LATEST=y.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xorgproto: bump version to 2019.1

Release notes:
https://lists.x.org/archives/xorg-announce/2019-June/003000.html

Switched _SITE to https.

Removed COPYING-panoramixproto from licenses, it was removed upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: Remove Markos Chandras

Email bounces:

<markos.chandras@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)

Last mailing list postings date back to 2015.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/eudev: bump version to 3.2.8

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/harfbuzz: bump version to 2.5.2

Upstream switched tarball to .xz

Updated license hash for COPYING after upstream commit:
https://github.com/harfbuzz/harfbuzz/commit/8ed7655be89c658219ab702e34a79734ba0efb73

Removed license file src/hb-ucdn/COPYING after upstream commit
https://github.com/harfbuzz/harfbuzz/commit/65392b734e38668b870b1ffcbfb4b42ec289ef58
removed src/hb-ucdn/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freetype: bump version to 2.10.0

Changelog:
https://sourceforge.net/projects/freetype/files/freetype2/2.10.0/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libbluray: bump version to 1.1.2

Changelog:
https://code.videolan.org/videolan/libbluray/blob/master/ChangeLog

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/postgresql: security bump version to 11.4

Release notes: https://www.postgresql.org/docs/11/release-11-4.html

Fixes CVE-2019-10164.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dmalloc: re-enable package on microblaze

Building dmalloc on Microblaze with optimization enabled and gcc < 8.x
fails with:

Error: operation combines symbols in different segments

This is due to gcc bug 63261 (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63261).

To avoid this, the dmalloc package has a !BR2_microblaze
dependency. However, gcc bug 63261 only triggers when optimization is
enabled, so we can work around the issue by passing -O0, which is what
we do in other Buildroot packages to work around this bug.

So, this commit passes -O0 when BR2_TOOLCHAIN_HAS_GCC_BUG_63261, and
re-enables dmalloc on Microblaze.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fxload: re-enable package on microblaze

Building fxload on Microblaze with gcc < 8.x and optimization enabled
fails with:

Error: operation combines symbols in different segments

This is due to gcc bug 63261
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63261).

To work around this, the fxload package has a !BR2_microblaze
dependency. However, gcc bug 63261 only triggers when optimization is
enabled, so a better work around is to pass -O0, which is what we do
in other Buildroot packages to work around this bug.

So, this commit passes -O0 when BR2_TOOLCHAIN_HAS_GCC_BUG_63261, and
re-enables fxload on Microblaze.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_63261

dmalloc and fxload fail to build for the Microblaze architecture with
optimization enabled with gcc < 8.x, with the following failure:

Error: PC relative branch to label logerror which is not in the instruction space
Error: operation combines symbols in different segments

The following defconfig allows to reproduce the issue:

BR2_microblazeel=y
BR2_OPTIMIZE_2=y
BR2_KERNEL_HEADERS_5_0=y
BR2_GCC_VERSION_7_X=y
BR2_PACKAGE_FXLOAD=y

The gcc bug was reported at
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63261 and is fixed as of
gcc 8.x.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/vlc: bump version to 3.0.7.1

Fixes green-flickering bug with Windows AMD drivers:
https://forum.videolan.org/viewtopic.php?p=492405#p492405

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/samba4: security bump version to 4.9.9

Release notes: https://www.samba.org/samba/history/samba-4.9.9.html

Fixes CVE-2019-12435.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/znc: security bump version to 1.7.4

Changelog: https://wiki.znc.in/ChangeLog/1.7.4

Fixes CVE-2019-12816:
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-12816

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libvncserver: add optional systemd dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing/infra/emulator: increase memory size used by Qemu

By default, Qemu emulates a system with 128 MB of RAM. This is not
sufficient for some test cases we have, such as TestPerlDBDmysql,
where the initramfs is quite large. Therefore, this commit extends the
RAM size emulated by Qemu to 256 MB.

Fixes:

https://gitlab.com/buildroot.org/buildroot/-/jobs/237108668

Thanks to Arnout for the analysis of the issue.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-periphery: new package

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libvncserver: bump to version 0.9.12

- Remove patch (already in version)
- autotools is no more available, switch to cmake
- Disable ffmpeg (used for example)
- Add LZO dependency (to avoid using internal LZO) through the new
WITH_LZO option added by
https://github.com/LibVNC/libvncserver/commit/139da17b6ed0ccd1acd824a87972182834671f92
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libvncserver: fix homepage

libvncserver homepage is https://libvnc.github.io/, last version on
sourceforge is 0.9.9 (seven years ago)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/coreutils: simplify the [ -> test symlink

Wheter we are mutli-call or multi-binaries, test is either a symlink to
coreutils or a standalone binary.

Consequently, test always exists, and so we can simplify the [ symlink.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gptfdisk: bump to version 1.0.4

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/alsa-utils: bump to version 1.1.9

Also remove the patch that have been upstreamed

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gerbera: bump to version 1.3.2

Remove patches (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: add C-SKY qemu support

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: move patches to a per version directory

This is done in preparation to the introduction of the support for a
different Qemu version, used on the C-SKY architecture.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lmbench: install the lmbench script on the target

We want to install the lmbench script along with the other executables,
so we add it to the appropriate list.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lmbench: mark scripts/build as bash script

scripts/build makes use of the "+=" operator which is not supported by
a pure POSIX shell. We switch to /bin/bash in order to avoid errors of
the form:

../scripts/build: 21: ../scripts/build: LDLIBS+= -lm: not found

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iputils: create ping6 symlink

Upstream expect distros will do it, see
https://github.com/iputils/iputils/commit/ebad35fee3de851b809c7b72ccc654a72b6af61d

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iputils: update upstream status of patches

Patch 0002-meson.build-fix-static-build-with-gcrypt.patch replaced with
0002-build-sys-fix-static-build-gcrypt-dependency-gpg-err.patch

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iputils: re-enable traceroute6

Bump to s20190515 removed traceroute6 build (it's not built by default
since this version in upstream). Reenable it again.

Fixes: 9ffcd9279e ("package/iputils: bump to version s20190515")
This requires fix similar to one in 0003-meson.build-fix-build-with-NLS.patch [1]

traceroute6 is in /usr/sbin, so no need to handle busybox problem
(6e18892733 "package/iputils: move binaries to the location also used by
Busybox").

[1] http://autobuild.buildroot.org/results/0a8a3efe734ac7fb3a68ba505277681857dc0a3d

Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/davfs2: bump to version 1.5.5

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dnsmasq: add libidn2 support

libidn2 is preferred over libidn, see src/util.c:
#if defined(HAVE_LIBIDN2)
#include <idn2.h>
#elif defined(HAVE_IDN)
#include <idna.h>
#endif

So select libidn2 if libidn is not enabled

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/util-linux: bump to version 2.34

- Remove patches already applied upstream.
- Update file hash.
- Add an option to select the new "hardlink" command (off by default)
- hardlink uses libpcre2-8 if pcre2 is detected at config time so add a
  build dependency on pcre2, if it's selected.
- Change selections to reflect that libblkid now does not depend on
  libuuid anymore

Full release notes available at

  https://mirrors.edge.kernel.org/pub/linux/utils/util-linux/v2.34/v2.34-ReleaseNotes

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openssh: bump to version 8.0p1

Also remove upstream patches.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libressl: bump to version 2.9.2

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dnsmasq: fix build with ubus and NLS

Fixes:
- http://autobuild.buildroot.org/results/c0b27754b7ede024c095bdf0b3616e6f6be48c6d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uboot-tools: fix legal-info

Add hash for LICENSE file

Fixes:

$: make uboot-tools-legal-info
>>> uboot-tools 2019.04 Collecting legal info
ERROR: No hash found for Licenses/gpl-2.0.txt

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uboot-tools: bump to version 2019.04

- Bump to version 2019.04.
- remove the patch that have been upstreamed.
- Refresh patches for the new version.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pycairo: new package

A Python module providing bindings for the cairo graphics library.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-daemon: add hashes for license files

Fixes:

$: make python-daemon-legal-info
>>> python-daemon 2.2.3 Collecting legal info
ERROR: No hash found for LICENSE.ASF-2
ERROR: No hash found for LICENSE.GPL-3

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-daemon: bump to version 2.2.3

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package: remove non-conventional prefix/suffix from tarball-fetched packages

While most projects name their tarball <name>-<version>, where
<version> is just the version number, some other projects add some
prefix and/or suffix to their version number.

In Buildroot, we currently encode the full version (with its
prefix/suffix) in the <pkg>_VERSION variable. However, that doesn't
work well to match version numbers with the release-monitoring.org
website, which filters such prefixes/suffixes.

This commit therefore removes the prefix/suffix from tarball-fetched
packages. The name of the files being downloaded does not change.

Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/pseudo: remove package

pseudo is not used and fails to build without xattr so remove it

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-txdbus: new package

Implements a native Python implementation of DBus for Twisted.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-tinyrpc: new package

A protocol neutral RPC library that supports JSON-RPC and zmq.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-iptables: new package

This package provides Python bindings for iptables.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: add license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-colorama: new package

This package provides a simple cross-platform API for printing
colored terminal text.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/opencv: fix build due to gcc bug 68485

With Microblaze Gcc version <= 9.x the build fails due to gcc bug 68485:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485. The bug show up when
building opencv with optimization but not when building with -O0. To
work around this, if BR2_TOOLCHAIN_HAS_GCC_BUG_68458=y, we force using
-O0.

Fixes:
- http://autobuild.buildroot.org/results/17fff0f312ebd520ba3341976ba56fd8c85ee376

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xapp_mkfontdir: remove package

app_mkfontscale now includes the mkfontdir script:
https://lists.x.org/archives/xorg-announce/2019-March/002988.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xfont_font-*: remove host-xapp_mkfontdir dependency

x11r7/xapp_mkfontscale as of version 1.2.1 includes the mkfontdir
script. This patch removes the now unneeded dependency to host-xapp_
mkfontdir in preparation for the removal of the xapp_mkfontdir package.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xapp_mkfontscale: bump version to 1.2.1

Updated license hash after upstream commit
https://gitlab.freedesktop.org/xorg/app/mkfontscale/commit/8609ad731b9c9c670a815c915055ae416d2396d8

Release notes:
https://lists.x.org/archives/xorg-announce/2019-March/002988.html

This version bump "now includes the mkfontdir script previously
distributed separately for compatibility with older X11 versions."

Removing the buildroot package host-xapp_mkfontdir will be done by
subsequent patches.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xserver_xorg-server: bump version to 1.20.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/at91bootstrap3: bump to version 3.8.12

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch/Config.in.nds32: force syntax colouring to kconfig

It is too sad when an editor picks up the wrong syntax...

Like was done in e837837791 for all the other archs, force
syntax to kconfig for nds32 too.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Nylon Chen <nylon7@andestech.com>
Reviewed-by:Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/coreutils: allow building as individual binaries

We add configuration option BR2_PACKAGE_COREUTILS_INDIVIDUAL_BINARIES
so that coreutils can be built and installed as individual binaries.
It can be used if the target file system doesn't support symlinks or
symlinks are undesirable.

The approach is modelled after Busybox's similarly named configuration
option.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
[Thomas: adjust to previous preparation commits.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/coreutils: split COREUTILS_CLEANUP and use better names

The COREUTILS_CLEANUP macro naming is a bit weird. In addition, it
does two unrelated things, and the introduction of support for
building coreutils as individual binaries will require splitting it
up.

So let's do this split as a preparation commit, and use better names
for both resulting macros.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/coreutils: rename COREUTILS_CLEANUP_BIN to a more sensible name

COREUTILS_CLEANUP_BIN doesn't mean much, what it really does is fixing
the location of binaries, so let's rename to a more sensible name.

This is done in preparation to the introduction of support for
building coreutils as individual binaries.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luasyslog: new package

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cups: bump to version 2.2.11 and add gzip fix

This patch bumps cups to version 2.2.11 so that an upstream fix will
apply cleanly.

The upstream fix corrects a build failure when GZIP is set in the
build environment, as it is for buildroot's reproducible builds, as
shown below:

gzip: /bin/gzip.gz: Permission denied
gzip: /bin/gzip.gz: Permission denied
Makefile:114: recipe for target 'install-data' failed

The patch will be included upstream in version 2.2.12.

Fixes:
- http://autobuild.buildroot.net/results/c4e0f6a3c79c9cb083a08f811b7d4838efef50f9/

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/download/git: fix formatting of error message

'.' should be at the end of the sentence, not the beginning of a new
line.

Signed-off-by: John Keeping <john@metanate.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/haproxy: re-enable package on microblaze

With Microblaze ccc version < 8.x and optimization, the build fails
with;

'internal compiler error: in do_output_reload, at reload1.c:7978'

This is due to gcc bug 90620:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90620. To avoid this, the
haproxy package has a !BR2_microblaze dependency. However, this gcc
bug 90620 only triggers when optimization is enabled, so we can work
around the issue by passing -O0, which is what we do in other
Buildroot packages to work around similar Microblaze issues.

So, this commit passes -O0 when BR2_TOOLCHAIN_HAS_GCC_BUG_90620, and
re-enables haproxy on Microblaze.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_90620

GCC fails building the haproxy package for the Microblaze architecture:

http://autobuild.buildroot.org/results/64706f96db793777de9d3ec63b0a47d776cf33fd/

The gcc bug was originally reported gpsd:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90620

This gcc bug no longer appeared with gcc 8.x but reappeared in gcc
9.x, so we introduce a config symbol so that packages can work it
around by disabling optimization.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flashbench: remove old toolchain microblaze & sh2a workaround

The old binary Microblaze and Sh2a toolchains were affected by Glibc
Bug 1228: https://sourceware.org/bugzilla/show_bug.cgi?id=1228 that
has been fixed in 2005, so let's remove actual work around:
'FLASHBENCH_CFLAGS += -std=gnu99' for both BR2_microblaze and BR2_sh2a
and remove local FLASHBENCH_CFLAGS in favour of TARGET_CFLAGS.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>