psmisc: bump to version 22.16

[Peter: Don't disable stack protection if toolchain has ssp support]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

syslinux: add upstream URL

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sudo: bump to version 1.8.4p4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sqlite: bump to version 3.7.11

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tftp-hpa: bump to version 5.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

coreutils: bump to version 8.16

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gawk: bump to version 4.0.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Fix problem with undefined umode_t type in 3.3 kernel headers

The 3.3 kernel headers define the umode_t type within a __KERNEL__
preprocessor ifdef region. This results in a broken kernel header in the
buildroot toolchain.

[Peter: This is discussed upstream here:
https://bugzilla.kernel.org/show_bug.cgi?id=42986
Long term socat/syslinux should stop using this header, but this hasn't
been fixed upstream yet]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libxml-parser-perl: fix host-intltool breakage when microperl is enabled

Microperl will build host-microperl and install it into HOST_DIR/usr/bin,
where other packages will pick it up as _CONFIGURE_OPTS / _MAKE_ENV
prepends that to the path.

libxml-parser-perl didn't though, so it would still be built against
the system perl, causing host-intltool to fail when it would use
host-microperl together with libxml-parser-perl if the system perl
isn't compatible with host-microperl.

Fix it by using HOST_CONFIGURE_OPTS and ensuring it is built after
(host-)microperl if enabled.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

microperl: fix MICROPERL_INSTALL_TARGET_CMDS

The MICROPERL_INSTALL_TARGET_CMDS used the following construct in a
for loop:

[ -d $(@D)/lib/$$j ] && cp -af $(@D)/lib/$$j \
$(TARGET_DIR)/$(MICROPERL_MODS_DIR) ; \
[ -f $(@D)/lib/$$i ] && $(INSTALL) -m 0644 -D $(@D)/lib/$$i \
$(TARGET_DIR)/$(MICROPERL_MODS_DIR)/$$i; \

The problem is that when at the last iteration, the second test (-f)
fails, then the whole loop ends with a non-zero error code, and makes
aborts the build. This happens for example if the last Perl modules in
the list is Time::Local, because such modules are taken care of by the
first condition (that copies a complete directory).

By moving to full if statements, we ensure that the return code is
zero even if the condition was false.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pango: fix compilation with glib 2.30

G_CONST_RETURN is deprecated in glib 2.30, so remove occurences
to avoid build failures.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

udev: bump to 182

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New package: socketcand

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kmod: only show tools option if BUSYBOX_SHOW_OTHERS

As pointed out by Arnout.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

poco: bump to 1.4.3p1

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kmod: add option to install module utilities

And ensure optional zlib+xz dependencies gets picked up.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kmod: adjust upstream URL

kmod still doesn't have a real website, but git tree moved to
kernel.org, so update help to match.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kmod: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libconfig: bump to 1.4.8 and cleanup

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/x86: update to use kernel 3.3

Also switch documentation to use qemu-system-i386

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/x86_64: update to use kernel 3.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/sparc-ss10: update to use kernel 3.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/ppc-g3beige: update to use kernel 3.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/mips-malta: update to use kernel 3.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/mipsel-malta: update to use kernel 3.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/arm-versatile: update to use kernel 3.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/sh4-r2d: update to use kernel 3.2.12

Unfortunately kernel 3.3 doesn't seem to work properly at the moment.
So lock down headers to version 3.2.x and kernel to 3.2.12.
Tested on qemu 1.0.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libupnp: move to version 1.6.14

As pointed by Sagaert Johan in the mailing list and further testing version
1.6.15 has some issues.
So move to version 1.6.14 which is far more stable and compliant.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

apply-patches.sh: add recursivity when scanning patchdir

Recursivity is needed with some tarballs containing debian patches:
.
  debian
    changelog
    control
    patches
      02-COPYRIGHT.patch
[...]

Since we can find some files which are not patches in those directories, only
consider .patch* and .diff* files as valid patches.
Due to recursivity, strip-components option is no more necessary so it has
been removed.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux.mk: .ub-File copying after building initramfs

test should exit with Exit-Code 0 if no .ub-File present and copy the
file if Exit-Code 1, otherwise make fails

Signed-off-by: Markus Kaindl <markus.kaindl@stusta.mhn.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libupnp: bump to version 1.6.15

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

liburcu: only some architectures are supported

Make sure that liburcu (and the packages that select it) cannot be
enabled on the architectures that are not supported. At the moment,
only x86, x86-64, PowerPC and ARM are supported.

[Peter: add armeb as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

parted: make sure to select libuuid in util-linux

parted correctly depends on util-linux, but fails to select the
libuuid suboption of util-linux, causing the following build failure
if libuuid remains unselected:

checking for uuid_generate in -luuid... no
configure: error: GNU Parted requires libuuid - a part of the util-linux-ng package (but
usually distributed separately in libuuid-devel, uuid-dev or similar)
This can probably be found on your distribution's CD or FTP site or at:
    http://userweb.kernel.org/~kzak/util-linux-ng/
Note: originally, libuuid was part of the e2fsprogs package.  Later, it
moved to util-linux-ng-2.16, and that package is now the preferred source.
make: *** [/home/test/test/output/build/parted-3.1/.stamp_configured] Error 1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

apply-patches.sh: use series file to apply patches in proper order

If a series file is present use it to determine the proper order to apply
patches instead of using ls sorting order.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
add a series file with a wrong patch order into an archive containing several
patches whose correct order is the alphabetical one
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

apply-patches.sh: change archive management

The way archives were managed was incorrect because the uncompressed archives
were sent directly to the patch command. It means that alphabetical patch
order was not respected.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

apply-patches.sh: directories are no more considered as overlays

When a directory is found in patchdir, it is skipped.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

apply-patches.sh: cleanup

Add quoting and remove redundant command.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

apply-patches.sh: rename targetdir to builddir

targetdir is not the output/target directory as it can suggest.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Config.in.arch: add help and less cryptic names to architecture menu

[Peter: fixup s/big-endian/big endian/ as pointed out by Thomas]
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libsigc: bump to 2.2.10 to fix build with gcc 4.6

The build of libsigc 2.2.8 fails with gcc 4.6 with the following error
message:

In file included from signal_base.cc:20:0:
../sigc++/signal_base.h:48:11: error: 'size_t' does not name a type In file included from ../sigc++/signal.h:8:0,

The 2.2.9 version was released with a fix for this build problem, so
we directly bump to the latest version 2.2.10, which builds fine under
gcc 4.6.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libatomic_ops: make it available only on supported architectures

libatomic_ops build fails on architectures such as MIPS or SuperH that
are not supported. So we make it possible to select the libatomic_ops
package only for the architectures that are known to be supported.

[Peter: add armeb as supported arch]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.0.x and 3.2.x stable versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

uClibc: enable utmpx support in defconfigs

It adds very little size overhead as the functions are just wrappers
around utmp, and E.G. systemd needs it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

uClibc: default to 0.9.33

This is the current stable version, and E.G. systemd doesn't build with
earlier versions.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Change the /etc/mtab symlink to use an absolute path

As systemd checks if /etc/mtab is a symlink to /proc/mount or
/proc/self/mounts, we need to change it so that we can run systemd.

http://cgit.freedesktop.org/systemd/tree/src/main.c#n1082

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

glib-networking: add missing host-intltool dependency

Fixes the following problem:

checking whether NLS is requested... yes
checking for intltool >= 0.35.0... ./configure: line 12323: intltool-update: command not found
 found
configure: error: Your intltool is too old.  You need intltool 0.35.0 or later.
make: *** [/home/test/test/output/build/glib-networking-2.30.2/.stamp_configured] Error 1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

at: uses fork(), so requires MMU

Fixes the following problem:

atd.o: In function `run_file':
atd.c:(.text+0x35c): undefined reference to `fork'
atd.c:(.text+0x75c): undefined reference to `fork'
daemon.o: In function `daemon_setup':
daemon.c:(.text+0x4bc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[1]: *** [atd] Error 1
make[1]: Leaving directory `/home/test/test/output/build/at-3.1.12'
make: *** [/home/test/test/output/build/at-3.1.12/.stamp_built] Error 2

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

transmission: add missing host-intltool dependency

Fixes the following build problem:

checking for intltool >= 0.35.0... ./configure: line 17915: intltool-update: command not found
 found
configure: error: Your intltool is too old.  You need intltool 0.35.0 or later.
make: *** [/home/test/test/output/build/transmission-2.33/.stamp_configured] Error 1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

e2fsprogs: bump to version 1.42.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Added the libtpl package

[Peter: drop _INSTALL_TARGET = NO as it installs a shared lib]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: add 3.3.x stable version

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.2.x stable version and add 3.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: disallow internal/ctng toolchains for microblaze

While there's some microblaze support in mainline gcc from 4.6.x,
there still seems to be something missing with the uClibc support, so
disable these for now.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Config.in.arch: Fix microblaze-be double quote issue

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ttcp: deprecate package

Software is ancient, upstream is missing and the package hasn't seen any
significant changes since it was added in 2003.

Unless someone steps up to update it (E.G. to gentargets), it will
be removed during the 2012.05 cycle.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Microblaze: added defconfig for Avnet S6LX9 Microboard

The Avnet S6LX9 Microboard is a small USB-Stick sized module
containing a Spartan6 FPGA capable of running the Microblaze
softcore processor together with RAM and FLASH memory.

This board support pachage assumes that the Microblaze Bitfile
available from the Avnet website is programmed into the FPGA.

Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Microblaze: build kernel with device tree

This patch adds the options needed to build the SimpleImage containing
the device tree structure needed for the Microblaze architecture.

Handling Device Tree and SimpleImage will be handled in a general way
in the future.

I provide this patch to be able to build the system in the meantime.

Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Microblaze: added external toolchain from Xilinx

Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Microblaze: added architecture support for both big endian and low endian

Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Tested Microblaze LE on a clean install
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

fis: convert to gentargets

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

doom-wad: convert to gentargets

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

DOWNLOAD: change $1=DIRECTORY_URL, $2=FILE_NAME to $1=FULL_FILE_URL, $2=FILE_NAME

This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.

Same thing with the SOURCE_CHECK_WGET and SCP functions.

All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.

Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: update Config.in dependency explainations

[Peter: adjusted according to Arnout's suggestions]
Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: fix typo

Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

docs: fix busybox url

Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

docs/buildroot.html: add new manual location and warning about this page

Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

docs/buildroot.html: cleanup trailing whitespaces

Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netsnmp: add option to enable debugging code

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

elf2flt: fix after conversion of binutils to package infrastructure

When binutils was converted to the package infrastructure (commit
009407e6b), the variable that elf2flt uses to find the binutils
libraries disappeared.  So use HOST_BINUTILS_DIR instead of
BINUTILS_DIR1.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add lpc3250loader to lpc3250 configs

Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add lpc3250loader to the host tools

[Peter: use install -D for installation]
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

vsftpd: fix SSL dependency

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

boost: Add comment when C++ is missing

[Peter: move above boost option so sub options gets indented]
Signed-off-by: Stephan Thamm <thammi@chaossource.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux-firmware: add ar7010 variant (ath9k_htc driver) firmware

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux-firmware: update definition for atheros ar9271

ar9271.fw is the old convention for the firmware.
Starting with kernel 3.0 the new convention is htc_9271.fw which is a
newer version of the firmware so symlinking won't do it and there are no
guarantees that the newer firmware will work with the older driver
either.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

vsftpd: bump to 2.3.5

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pulseaudio: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

openssl: security bump to version 1.0.0h

Bump to version 1.0.0h to fix CMS and S/MIME Bleichenbacher attack (CVE-2012-0884)

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libffi: bump version to 3.0.10

Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

config: improve help text and prompt for debugging related options

The help text for the choice of different stripping levels is removed,
since it is not displayed by menuconfig. Instead, only the per-option
help text is visible, so this text is improved.

[Peter: slightly reworked text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

debug: provide an option to copy the gdbserver to the target

When an external toolchain is used, it is very likely that it contains
a pre-built version of a gdbserver that has the same version as the
cross-gdb included in the external toolchain. So, we now provide an
option that allows to copy this pre-built gdbserver to the target.

As the location of the gdbserver in the external toolchain is not
standardized, we only support the CodeSourcery and Crosstool-NG
layouts for the moment. Other locations can be added later.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

debug: do not force installation of gdbserver

The BR2_ENABLE_DEBUG option selects the compilation and installation
of gdbserver on the target. This is a bit restrictive, especially for
external toolchains, which may already contain a gdbserver on the
target.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Added lcdproc package

[Peter: fix download URL, move to 'Hardware handling' section]
Signed-off-by: Simon Dawson <spdawson at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove stray $ character from a bunch of init scripts

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

squashfs3: fix build with uClibc

The squashfs3 package uses the old get_nprocs() GNU extension which does not
exist in uClibc. This has already been fixed in newer squashfs releases
(>=4.0). The patch is similar to the one committed in
dfa2a513e1aa7f6ec47f630c5d31d98cd098f408

[Peter: add patch header]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

new package: zeromq

[Peter: fix C++/LF deps, reformat help, install into staging]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

util-linux: fix libmount build under uClibc

Patch taken from gentoo.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

nbd: fix download URL

The old URL nowadays return a 404.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dhcp: fix download URL

Tarball is in a subdir.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libfuse: fix download URL

The old URL nowadays return a 404.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ext-toolchain: Automatically set -m64 if the architecture is x86_64

Without the -m64, choosing the x86_64 architecture with a Sourcery external
toolchain will result in a 32-bit rootfs.

Also simplified the help text to reflect this change.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

apply-patches.sh: remove any rejects before applying patches

[Peter: .rej files might be in subdirs, so just do find .. | xargs rm]
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gst-plugins-bad: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gst-plugins-ugly: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gst-plugins-good: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gst-plugins-base: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gstreamer: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libxml2: ensure patches are applied in the correct order

Some of the patches depends on eachother, so rename them to ensure they
get applied in the correct order.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gcc: bump 4.4.x version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>