xz: bump version to 5.2.0

-Bump version to 5.2.0
-Update hash file
-Use xz tarball instead of bz2 to save space and bandwidth

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/strongswan: add tools option deprecation notice

It's now a split option with pki and scep, with some other tools being
deprecated upstream so select both when tools was selected to get as
close as possible.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

strongswan: security bump to version 5.2.2

Fixes CVE-2014-9221 - denial-of-service vulnerability triggered by an
IKEv2 Key Exchange payload that contains the Diffie-Hellman group 1025.

Also add hash file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

msmtp: bump to version 1.6.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gzip: fix installation path

Make gzip install binaries to / rather than /usr to fix bug #7766, it's
the FHS mandated target.

This also avoids duplicating binaries with busybox when both are
installed.

Also make gzip install after busybox if both are enabled to make the
proper gzip package override any busybox version since it's usually more
lightweight in functionality and slower.

And add a hash file while at it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libmemcached: fix build failure with automake 1.15+

Adding a patch to move AC_CONFIG_AUX_DIR up a few lines so the autotools
can find it.

This patch is based on the same solution adopted by Debian:

  https://lists.debian.org/debian-release/2014/11/msg01231.html

This will prevent a build failure like this one caused by a version bump
of the automake package:

configure: error: cannot find install-sh, install.sh, or shtool in "."
"./.." "./../.."

Related:
  http://lists.busybox.net/pipermail/buildroot/2015-January/116604.html

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/p1010rdb: bump to kernel 3.18.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/mpc8315erdb: bump to the latest and greatest versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dbus: security bump to version 1.8.14

Fixes CVE-2014-8148 - If a system service installs unsafe security
policy rules that allow arbitrary method calls then this prevents memory
consumption and possible privilege escalation via
UpdateActivationEnvironment.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

poppler: security bump to version 0.24.5

Fixes CVE-2013-7296 - JBIG2Stream::readSegments()" Denial of Service
Vulnerability.

Also add hash file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sofia-sip: needs threads

Fixes:
http://autobuild.buildroot.net/results/1e8/1e8c466b7a65b8e70f3318ab1a5bad79468f5efd

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imagemagick: security bump to version 6.9.0-3

Fixes many of the reported security audit vulnerabilities:
http://www.openwall.com/lists/oss-security/2014/12/24/1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: add a patch to use -Wunused-but-set-variable only when available

Fixes:

  http://autobuild.buildroot.org/results/3f0/3f07574e6e4edda9e31fcb0de520a4dbabe6b94a/

[Thomas:
 - Improved configure.ac logic, as suggested by Yann E. Morin.
 - Added a comment in the .mk file to indicate why we're using
   AUTORECONF = YES. Suggested by Yann as well.]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/download: further silence the git helper

We expresely call printf in the git helper, calls which were not
addresed in the previous silent-build patchset.

Just redirect stdout to oblivion when being silent.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/shairport-sync: bump to version 2.1.15

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-django: be more specific about the license

The license is really a 3 clauses BSD license, so let's specify this
in python-django.mk.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-django: new package

[Thomas:
 - Bump to Django 1.7.2, the latest available version;
 - Support Python 3 in addition to Python 2.
 - Use a download location from pypi.python.org since the download
   location from djangoproject.com didn't work as is and is
   impractical to use with Buildroot: the full URL of the tarball is
   https://www.djangoproject.com/download/1.7.2/tarball/. I.e, it does
   not end with the tarball file name.]

Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dmalloc: fix parallel build

Should hopefully fix:

  http://autobuild.buildroot.net/results/2cc40ae3fc8b7a287c43528b3e4ffdbcd5033c09/

[Thomas:
 - Rename patch to the new naming convention.
 - Add SoB line from Alex inside the patch itself.
 - Adjust the commit log to contain the reference to the autobuilder
   failure.]

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dmalloc: rename patches to the new naming convention

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libwebsock: allow building without SSL

libwebsock can optionally use SL, and defaults to using it without
checking for its presence first.

Just disable SSL support if openssl is not enabled, and ensure it is
built before libwebsock if it is enabled.

Add a patch to fix SSL conditional build.

Fixes:
    http://autobuild.buildroot.org/results/2c4/2c49e45667aaf2f2a59ace94885b9d4ed98038d7/
    http://autobuild.buildroot.org/results/517/517bc814732f86dc6dd1a5c91148ce52ec9803f7/
    http://autobuild.buildroot.org/results/951/95109c7e37aa21228bc71c69e9c66a6821f3174a/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

erlang: fix comment dependencies

The comment was missing the dependency on BR2_USE_MMU, and was using
'depends on !BR2_TOOLCHAIN_HAS_THREADS && BR2_STATIC_LIBS' while it
should in fact be '!BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS',
since we want show the comment *either* when we don't have threads
*or* when we are building a purely static lib system.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/erlang: fix detection of libatomic_ops

For some platforms, hardware-assisted compare-and-swap may not be
available, so libatomic_ops will not provide it.

However, libatomic_ops can provide a purely software CAS emulation, but
must be instructed to do so. erlang just forgot to tell libatomic_ops
that it does require CAS.

Fix that by defining AO_REQUIRE_CAS before including atmoic_ops.h, like
is done in libunwind, as pointed out by Thomas.

Also, erlang has a convoluted, mind-alterating set on aclocal.m4 macros,
that just forgets to link against -latomic_ops when checking CAS is
available, so that even if CAS is available, configure chokes.

Since I would like to keep the little sanity I still have, just force
linking with -latomic_ops. This is useless when the check is natrally
sucessful (i.e. on platforms where CAS is available in HW), but we
would eventually link with -latomic_ops there, too; it's just redundant.

Overall, just consider that erlang requires libatomic_ops, so forcibly
depend on it, it is easier than trying to disable it. We can revisit
that whenever someone wants to run erlang on a platform for which there
is no libatomic_ops support.

Fixes a slew of autobuild ARM failures:
    http://autobuild.buildroot.org/results/e7b/e7bfc4893dea6b133f0794ef44d50ad89bcb6662/
    http://autobuild.buildroot.org/results/3e9/3e9c307f1ec6536482641019dcaa94677f7267a3/
    http://autobuild.buildroot.org/results/a85/a85ca414e5b67af46510abd7b610eb5ae8661de4/
    [...]

[Thomas: fix minor typos in commit log, add dependency on
BR2_PACKAGE_LIBATOMIC_ARCH_SUPPORTS to the Erlang comment about thread
and shared library dependency.]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pkg-download: do not hard-code QUIET

Do not hard-code QUIET in our download commands, since it is handled in
the backends.

Suggested by Fabio.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-download: silence downloads if make is silent

If doing a silent build (make -s -> QUIET=-q), silence all downloads,
by passing the -q flag downward to backends as well as to check-hash.

Change a printf to use the trace functions.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/download: support -q in all download backends

Add an option flag to all backends, as well as the check-hash script, so
as to silence download helpers when the user wants a silent build.

Additionaly, make the default be verbose.

Inspired by Fabio's patch on git/svn.

[Thomas: fix a typo "Environemnt" -> "Environment"

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-audioencoder-vorbis: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-pvr-addons: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: bump version to 10.4.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva-intel-driver: bump version to 1.5.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva: bump version to 1.5.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

msmtp: bump to version 1.6.0

In addition to bumping the version:

 - drop license comment from help, we have PKG_LICENSE* for that.
 - add optional dependency on libsecret
 - remove --without-gnome-keyring option

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsecret: bump to version 0.18

Also add hash file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpdecimal: bump to 2.4.1 and add hash file

Bumping mpdecimal to 2.4.1 is necessary to make the Python 3 'decimal'
module to build properly, since Python 3.4.2. Thanks to Samuel Martin
for the investigation!

Fixes:

  http://autobuild.buildroot.org/results/c9b/c9b6dd19f16a56a16ef441d5b303badab9720bd7/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upx: needs zlib

Fixes build issues like, observed on a stripped-down build system:
    compress.cpp:32:18: fatal error: zlib.h: No such file or directory
     #include <zlib.h>
                  ^
    compilation terminated.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

stunnel: bump to version 5.09

Change to usenix.org.uk mirror since nluug.nl doesn't seem to mirror
files as quickly and is down at the moment.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

file: bump to version 5.22

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openocd: disable aice programmer on non-MMU architecture

aice sources use fork function, which is only available on architecture
with MMU.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openocd: explicitly disable unselected adapters

Some adapters are automatically enabled, but may not be built because of
missing (archecture) dependencies. So, just set the options symetrically.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libselinux: needs shared library support

Even though technically libselinux could make its <dlfcn.h> include
optional, the build system isn't really suited to build and install
only the static variant of libselinux, so let's make libselinux and
its reverse dependency not available in pure-static environments.

Fixes:

  http://autobuild.buildroot.org/results/90d/90dc73980a45b9b0441be3d493b22e3afea3cd6e/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openocd: pass --disable-werror to fix build issues

Should fix:

  http://autobuild.buildroot.org/results/91d/91d2ae34f14f1978e0985e75f803055d51201a93/

and similar build problems.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python: rename patches to the new convention

Note that we don't use completely sequential numbers, because patches
below 100 are used to address cross-compilation issues in Python,
while patches above 100 are used to make more Python modules
configurable.

[Thomas: fixup commit log.]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

python: bump to 2.7.9

In addition to doing the bump, this commit also:

 - Refreshes all the patches
 - Removes python-003-properly-detect-if-python-build.patch, which has
   been applied upstream.
 - Passes the --without-ensurepip option, like is done in Python 3, to
   avoid having Python use PIP to automatically download stuff when it
   is being built.
 - PYTHON_LIBTOOL_PATH = NO is added to prevent Buildroot from trying
   to patch a version of libtool for which we don't have matching
   patches, which isn't a problem since we're anyway not using the
   part of the Python sources that uses libtool (it's the built-in
   copy of libffi, and we use the external libffi).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

python3: rename patches to the new convention

Note that we don't use completely sequential numbers, because patches
below 100 are used to address cross-compilation issues in Python 3,
while patches above 100 are used to make more Python 3 modules
configurable.

[Thomas: fixup commit log.]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

python3: bump to 3.4.2

This commit bumps python3 to Python 3.4.2. Two patches had to be
changed slightly to fix some minor conflicts.

PYTHON3_LIBTOOL_PATH = NO was added to prevent Buildroot from trying
to patch a version of libtool for which we don't have matching
patches, which isn't a problem since we're anyway not using the part
of the Python sources that uses libtool (it's the built-in copy of
libffi, and we use the external libffi).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/busybox: Add facility for DHCP hooks

The (u)dhcpc hook installed by the busybox package configures the
network and exits. If we want to do anything further with a DHCP lease,
we'd have to replace the script entirely.

This change introduces a .d directory for hooks (based on the script
filename), which are executed after the interface configuration. This
allows packages to drop a script file in the .d directory to perform
actions on DHCP events.

We'll use this in a later change to notify petitboot of DHCP boot
information.

[Thomas: update to latest Buildroot, fix indentation.]

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lightning: new package

GNU lightning is a library that generates assembly language code at
run-time.

https://www.gnu.org/software/lightning/

[Thomas:
 - Wrap list of architectures in Config.in
 - Introduce an explicit Config.in option for the disassembler
   support, since it needs both binutils and zlib, which may not be
   easy to guess.
 - Add hash file.
 - Bump to version 2.0.5.
 - Add patch to fix cross-compilation issues on ARM and x86 due to
   AC_RUN_IFELSE() tests.
 - Adjust license information: the library is actually under LGPLv3+,
   not GPLv3. There is a COPYING file with the text of the GPLv3 in
   the code base, but this license doesn't seem to be used in anything
   that is actually installed.
 - Add AUTORECONF = YES since we're now patching configure.ac.
 - Add missing dependency on zlib for the disassembler support.
 - Add a special LIBS=-lintl when enabling the disassembler support
   because binutils libraries use gettext functions, but they are not
   linked against libintl.]

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: Also install libopcodes in staging

This library will be used later in the "lightning" package.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpd-mpc: new package

[Thomas:
 - Changed hash file to use SHA256
 - Remove libiconv handling, since the iconv detection in mpc is
   broken: if it's not available in the C library, it expects to find
   iconv() in libintl (from gettext). But it's actually libiconv that
   provides iconv() for non-locale capable uClibc toolchains. But
   since anyway the package builds fine without iconv() support and
   properly detects when it's available, don't bother with this.]

Signed-off-by: Thierry Bultel <tbultel@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevent: add optional dependency on OpenSSL

libevent can optionally use OpenSSL, so add an optional dependency on
this package to explicit this possibility. This makes sure libevent
always gets built with OpenSSL support when the OpenSSL package is
enabled.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Makefile: improve detection of make "-s" flag

Because it's just checking the presence of the "s" character even a
  make --warn-undefined-variables
is detected as a silent build.

Fix that by filtering out long options.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openocd: bump to version 0.8.0

This patch adds the management of (almost) all the config options of
openocd 0.8.0. A BR config variable is added for (almost) every
adapter known to openocd and all the dependencies are automatically
calculated from the chosen adapters, so only the necessary libraries
are built.

Note that CMSIS_DAP adapter requires hidapi (not libhid) and hidapi is
not actually included in buildroot, so it has been removed.  Also
zy1000 adapters are actually broken in openocd and have been removed.

The host version of the package enables all the possible adapters and
the related libraries.

[Thomas:
 - Slightly fixup the commit log.
 - Rename the patches to the new patch naming convention.
 - Update hash file using a contribution from Vincent Stehlé.
 - Move the thread dependency from the OpenOCD option down to each
   sub-option that actually needs it (when it needs libusb,
   libusb-compat or libftdi). We keep only one comment, as we would
   otherwise have to add too many repeatitive comments.
 - Remove commented options.
 - Add missing dependency on BR2_ARCH_HAS_ATOMICS when selecting
   BR2_PACKAGE_LIBFTDI.
 - Remove trailing white spaces.
 - Pass -std=gnu99, needed to build with a basic toolchain.
 - Write the OPENOCD_DEPENDENCIES and OPENOCD_CONF_OPTS conditions in
   a more compact way.
 - Adjust indentation for HOST_OPENOCD_CONF_OPTS.
 - Reword the comment above HOST_OPENOCD_CONF_OPTS.]

Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: change Device Tree prompt

The current prompt seems to imply that we want to add Device Tree
support to the Linux kernel:

    [*] Device tree support

But what it really means is that Buildroot will build a DTB.

Change the prompt so that it is obvious that this is the intended
behaviour, and users do not get mislead as to why Device Tree support is
not automatically added to their Linux kernel.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lsof: bump to version 4.88

Rename patches to new convention and add hash file as well.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.2.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mrouted: bump to version 3.9.7

bcopy patch removed since code is upstream.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

radvd: bump to version 2.9

0003-Improve-check-of-the-sysctl-function.patch is now upstream.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dvb-apps: rename patches to follow the new name convention

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libxmlrpc: fix shared libraries build for uClibc

libxmlrpc is able to build shared libraries only for (e)glibc system
since the regexp in config.mk.in is based on "linux-gnu".

Change this regexp to match "linux-uclibc".

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/keyutils: disable static library for shared only build

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libsvgtiny: enable shared library build

[Thomas: clarify the comment explaining why we only build/install the
shared library when BR2_STATIC_SHARED_LIBS=y.]

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

memcached: bump to version 1.4.22

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsepol: change to github location

The old location doesn't seem active any more. Even though this github URL
looks a bit odd, it is linked from
https://github.com/SELinuxProject/selinux/wiki/Releases

Also add a .hash file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsemanage: change to github location

The old location doesn't seem active any more. Even though this github URL
looks a bit odd, it is linked from
https://github.com/SELinuxProject/selinux/wiki/Releases

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libselinux: change to github location

Fixes:
http://autobuild.buildroot.net/results/4a7/4a7b71f1471b889abf278882a7735475dd95451b/
http://autobuild.buildroot.net/results/bdf/bdf621c5a893bce51db95f4a8f2814c14d2f6d49/
http://autobuild.buildroot.net/results/7a8/7a8426f60a7377e3b08e6502f4e0b2c738002a79/
http://autobuild.buildroot.net/results/d90/d90e40f7fb6e1a7d429454d04b9f5f69826a842e/

And many more.

The old location doesn't seem active any more. Even though this github URL
looks a bit odd, it is linked from
https://github.com/SELinuxProject/selinux/wiki/Releases

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

defconfigs: bump sheevaplug kernel to 3.18.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

defconfigs: bump openblocks a6 kernel to 3.18.1

And move to mvebu_v5_defconfig as kirkwood has been merged with mvebu since
3.17.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

defconfigs: bump minnowboard-max kernel to 3.18.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sunxi-tools: bump version

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sunxi-mali-prop: bump version

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rpi-firmware: only install images

The rpi-firmware only installs images files, so it should use
_INSTALL_IMAGES_CMDS and not _INSTALL_TARGET_CMDS.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

szip: new package

[Thomas:
  - Add hash file.
  - Rewrap Config.in help text and remove trailing whitespace.
  - Remove unneeded empty new line at the end of the .mk file.]

Signed-off-by: Ernesto L. Williams Jr <ernesto@slac.stanford.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsemanage: add hash file

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bluez5_utils: fix O_CLOEXEC build failure

Add a patch for bluez5_utils to fix the O_CLOEXEC build failure, due
to a missing <config.h> include.

Fixes:

  http://autobuild.buildroot.org/results/c61/c6117d261d0c7f938fabddb806d0b0095fe9dfb9/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bluez5_utils: improved version of the mcaptest patch

As suggested by bluez5_utils upstream developers, use an improved
version of the mcaptest patch that only conditionally links on librt
instead of unconditionally linking against it (glibc after 2.17 have
clock_getres() in libc and not in librt).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsemanage: misc improvements

This commit should have been part of the "libsemanage: new package"
commit, but due a mistake, the former commit was pushed before those
changes were squashed into it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: document LIBFOO_INSTALL_IMAGES

Document it as are LIBFOO_INSTALL_STAGING and LIBFOO_INSTALL_TARGET.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rpi-firmware: bump version

Too many changes to list, but lots of fixes and enhancements all over
the place...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsemanage: new package

Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ustr: new package

[Thomas:
 - Fix typo in patch description.
 - Remove trailing whitespace in Config.in.
 - Fix Config.in comment to match what's specified in the Buildroot
   manual.
 - Adjust .mk logic to use BR2_STATIC_LIBS vs. BR2_SHARED_LIBS instead
   of BR2_PREFER_STATIC_LIB, and therefore support the installation of
   only the shared library.
 - Remove the libustr-debug library from the target and staging
   directories, it's the same as libustr, except that it's compiled
   with debugging symbols.
 - Always install only the shared variant of the library for
   host-ustr.]

Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libselinux: new package

[Thomas:
  - Add hash file.
  - Enable on all architectures, and enable on uClibc. The
    autobuilders will let us know if there are any problems.
  - Use "Public Domain" as the license instead of "PublicDomain"
  - Handle Python 2 vs. Python 3 for the host package. Either can be
    used by libselinux.
  - Change the trick used to get the library and programs installed in
    usr/lib/ and usr/sbin/ instead of lib/ and sbin/.]

Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libnspr: disable static library for shared only build

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imagemagick: needs thread support

The no thread support in imagemagick is broken since the last
bump. Since supporting non-threaded configurations is not that
important, let's simply make imagemagick depend on thread support.

Fixes:

  http://autobuild.buildroot.org/results/4e6/4e6d0bbe120579ab4a54960ee794e8cf64b99e80/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ortp: do not use libsrtp

ortp is not happy with the newly packaged libsrtp implementation, so
let's not use it.

Fixes:

  http://autobuild.buildroot.org/results/ba1/ba1e29c6b5cc7ff7ff4582ec2319598ff9b28bae/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lcms2: install to staging

Other packages might depend on lcms2, thus it should install its
development files.

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sane-backends: install to staging

Other packages might depend on sane, thus it should install its
development files.

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: new package

[Thomas:
  - Rename patch to the proper naming convention, and add a
    description to it.
  - Add mandatory dependency to OpenSSL.
  - Make the dependency on libwebsock optional.
  - Remove select of host-gengetopt, since this package no longer has
    a menuconfig option.
  - Add missing toolchain option dependencies inherited from selected
    packages.
  - Add proper Config.in help text.
  - Fix the .mk comment header to the proper format.
  - Use the github function and remove the unneeded SITE_METHOD
    variable.
  - Add support for optional Opus and Libogg support.
  - Remove hash file, since the package is fetched from github.]

Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gengetopt: new package

Add a host only package, which will be needed for janus-gateway.

[Thomas:
  - Improve commit log.
  - Remove target variant of the package, not needed as we don't do
    development on the target.
  - Remove Config.in.host option for the package, there is not really
    a need to select it from menuconfig, it's merely a build
    dependency for another package.
  - Fix format of hash file.
  - Fix format of comment header in .mk file.
  - Use BR2_GNU_MIRROR.
  - License is GPLv3+, not GPLv3.
  - Add 'LICENSE' to the license files, as it indicates that the
    license is GPLv3+.
  - Add an explanation about $(MAKE1) being used.]

Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sofia-sip: rename patch to the new naming convention

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sofia-sip: new package

[Thomas:
 - Add better Config.in help text.
 - Fix the hash file format.
 - Fix comment header in .mk file.
 - Remove SOURCE variable, as it had the default value.
 - Add dependency on host-pkgconf, used by the configure script.
 - Add LICENSE and LICENSE_FILES variables.
 - Do not use BR2_HAVE_DOCUMENTATION, this option has been
   removed. Instead, always disable doxygen.
 - Simplify the IPv6 test.
 - Add optional dependency on OpenSSL.
 - Fixup the handling of the --enable-ndebug.]

Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsrtp: add missing patch

This patch should have been part of the commit adding the libsrtp
package, as it fixes a number of build issues.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libwebsock: new package

[Thomas:
 - Add dependency on BR2_TOOLCHAIN_HAS_THREADS
 - Improve Config.in help text
 - Fixup comment header in .mk file.
 - Use github helper.
 - Remove hash file (we're downloading from Git)
 - Fixup LICENSE_FILES
 - Remove LIBWEBSOCK_CFLAGS, they were the default.
 - Remove LIBWEBSOCK_LIBS, and instead use a patch to switch
   libwebsock configure script to use pkg-config.]

Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpa_supplicant: fix indentation and change file permissions

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsrtp: new package

[Thomas:
 - Add better Config.in help text and fix its indentation
 - Fix comment header in .mk file
 - Uncomment useful commented lines in .mk file (SITE and AUTORECONF)
 - Add LICENSE_FILES variable.
 - Add handling of static/shared libraries build/installation.
 - Add dependency on host-pkgconf, so that libsrtp installs its own
   .pc file.
 - Add optional dependency on OpenSSL.
 - Use github helper.
 - Remove hash file, since we're downloading from Git.]

Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "svgtiny: update source url"

This reverts commit 8f9b5f657b3dbb82a5725c3bf24ed261a77111d8.

The new svgtiny version does not build at all, see:

  http://autobuild.buildroot.org/results/242/24257e9739df8f589150336cb6213812516bf465/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ding-libs: fix Config.in dependency logic

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ding-libs: new package

[Thomas:
 - Remove unneeded comment in Config.in
 - Remove select if libiconv, not needed
 - Add dependency on wchar, needed when we depend on gettext
 - Improve Config.in help text
 - Fix the format of the hash file to make it actually useful
 - Fix the comment header in the .mk file
 - Remove useless commented line in .mk file
 - Fixup license information: it's not under GPLv3, but under LGPLv3+
   (library) and GPLv3+ (test programs)
 - Add host-pkgconf to the dependencies, remove libiconv from the
   dependencies.
 - Add a comment to explain why autoreconf is needed.
 - Remove usage of $(MAKE1) that does look necessary.]

Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnice: new package

[Thomas:
 - Rename patch to the proper naming convention
 - Reduce patch to only take care of the IPv6 case
 - Add description in the patch
 - Propagate libglib2 dependencies in Config.in + added the
   corresponding comment.
 - Added a real help text, and fixed the help text indentation.
 - Fixed the comment header in the .mk file to have the right number
   of # signs.
 - Added the license informations
 - Added a dependency on host-pkgconf, used by the configure script
 - Added --without-gstreamer and --without-gstreamer-0.10 to be
   explicit about the fact that we don't support GStreamer in libnice
   for now.
 - Fixed the hash file to have the proper format.]

Signed-off-by: Gregory Dymarek <gregd72002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

svgtiny: update source url

As source url use the git repository instead of the unavaiable svn
repository.

This fix the following error:

svn: E670002: Unable to connect to a repository at URL 'svn://svn.netsurf-browser.org/trunk/libsvgtiny'
svn: E670002: Unknown hostname 'svn.netsurf-browser.org'

[Thomas: use http:// access to the Git repository, as suggested by
Baruch.]

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libvncserver: OpenSSL support needs NPTL thread support

The OpenSSL support of libvncserver already has a dependency on thread
support, but it in fact requires NPTL threading.

Fixes:

  http://autobuild.buildroot.org/results/be2/be20dec9ffe7de3adc46a834852b20353d39baff/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>