remote-notif.[h|c]:notif_debug: Change type to int.

notif_debug is installed as variable of a "signed" command:

  add_setshow_boolean_cmd ("notification", no_class, &notif_debug,
                           _("\

and:

command.h:extern void add_setshow_boolean_cmd (char *name,
command.h-                                   enum command_class class,
command.h-                                   int *var,

2013-03-07  Pedro Alves  <palves@redhat.com>

* remote-notif.c (notif_debug): Change type to int.
* remote-notif.h (notif_debug): Likewise.

ser-tcp.c:tcp_retry_limit: Change type to unsigned int.

tcp_retry_limit is installed as variable of an unsigned command:

  add_setshow_uinteger_cmd ("connect-timeout", class_obscure,
                            &tcp_retry_limit, _("\

and I found no uses of the variable treating it as signed (like < 0
checks or some such).

2013-03-07  Pedro Alves  <palves@redhat.com>

* ser-tcp.c (tcp_retry_limit): Change type to unsigned int.

hex2bin, bin2hex: move declarations to header.

Move the declarations to a header, rather than declaring them in
(multiple) .c files.

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* remote.c (hex2bin, bin2hex): Move extern declarations to ...
* remote.h (hex2bin, bin2hex): ... here.
* tracepoint.c (hex2bin, bin2hex): Remove extern declarations.

gdb/gdbserver/
* tracepoint.c (cur_action, cur_step_action): Make them unsigned.
(cmd_qtfp): Initialize cur_action and cur_step_action 0 instead
of -1.
(cmd_qtsp): Adjust condition.  Do post increment.
Set cur_action and cur_step_action back to 0.

* utils.c (initialize_utils): Improve doc strings of "set/show
width", "set/show height", and "set/show pagination".

PR gdb/15236: gdbserver write to linux memory with zero length corrupts stack

PROBLEM:

The function linux_write_memory () in linux-low.c allocates a buffer
on the stack to hold a copy of the data to be written.

  register PTRACE_XFER_TYPE *buffer = (PTRACE_XFER_TYPE *)
    alloca (count * sizeof (PTRACE_XFER_TYPE));

"count" is the number of bytes to be written, rounded up to the
nearest multiple of sizeof (PTRACE_XFER_TYPE) and allowing for not
being an aligned address. The function later uses

  buffer[0] = ptrace (PTRACE_PEEKTEXT, pid,
                      (PTRACE_ARG3_TYPE) (uintptr_t) addr, 0);

The problem is that this function can be called to write zero bytes on
an aligned address, for example when receiving an X packet of length 0
(used to test if 8-bit write is supported). Under these circumstances,
count can be zero.

Since in this case, buffer[0] may never have been allocated, the stack
is corrupted and gdbserver may crash.

SOLUTION:

Writing zero bytes should always succeed. The patch below returns
successfully early if the length is zero, so avoiding the stack
corruption.

Verified on the ARC GDB 7.5.1 port.

2013-03-07  Jeremy Bennett  <jeremy.bennett@embecosm.com>

PR server/15236

* linux-low.c (linux_write_memory): Return early success if LEN is
zero.

* testsuite/discard_locals_relocatable_test.c: Add a powerpc
relocation referencing .LC0.
* testsuite/discard_locals_test.sh: Remove FIXMEs.

* testsuite/ifunc-sel.h (ifunc_sel, ifunc_one): Mark
always_inline.  Add assembly for powerpc to avoid GOT.

* testsuite/script_test_10.sh: Don't test .bss section
header number.

* ax-gdb.c (gen_printf): Make FORMAT const.
* ax-gdb.h (gen_printf): Likewise.
* ax-general.c (ax_string): Make STR const.
* ax.h (ax_string): Likewise.

*** empty log message ***

daily update

* elfread.c (elf_symfile_read): Move debugging printf to more
logical location.

Garbage collect py-utils.c:target_string_to_unicode.

The strlen in this function looked suspicious, for the function
documents that STR is in the target's charset (what if it is utf-32,
etc.).

On closer inspection, nothing is calling the function, and it's been
that way ever since the function was added.

gdb/
2013-03-06  Pedro Alves  <palves@redhat.com>

* python/py-utils.c (target_string_to_unicode): Delete function.
* python/python-internal.h (target_string_to_unicode): Delete
declaration.

* ldfile.c (ldfile_open_command_file_1): Return after einfo
to avoid warning.

* strings.c (get_char): Dispense with buf[].  Instead shift
chars into big-endian value and byte-swap later if
little-endian.  Don't EOF check value read from object.

* powerpc.cc (class Powerpc_relobj): Move some member functions.
(Target_powerpc::symval_for_branch):  Add symtab param.  Update
all callers.  Handle folded sections.
(Target_powerpc::do_gc_add_reference): Don't cast dynamic object
to Powerpc_relobj.
(Global_symbol_visitor_opd::operator()): Likewise.

tstatus.exp: use UNSUPPORTED for optional features that are not supported

The current tstatus.exp tests shows PASSes if either the target
support or not the optional tstatus bits:

 PASS: gdb.trace/tstatus.exp: tstatus does not report trace stop reason
 PASS: gdb.trace/tstatus.exp: tstatus reports trace stop reason

The former (and any other similar case) should be UNSUPPORTED rather
than PASS.  That'd make it much easier to spot actually problems with
the test (e.g., the one Yao's previous patch addressed), along with
regressions and progressions.

The "not supported" paths in tstatus.exp explicitly check for output
you'd get if the feature wasn't supported, so real unexpected failures
will still be caught as FAILs.

So now e.g., where we wanted to check if tstatus reports the trace
stop reason, and if the target does support it, we get

 PASS: tstatus reports trace stop reason

if the target actually reports what we'd expect if the trace stop
reason isn't supported, we get:

 UNSUPPORTED: tstatus reports trace stop reason

and if the target reports something else unexpected, we get:

 FAIL: tstatus reports trace stop reason

That has the added bonus that the test string is always the same and
only the test results change (PASS/FAIL/UNSUPPORTED), which makes it
easier for testers see regressions, compared to the previous:

 -PASS: gdb.trace/tstatus.exp: tstatus reports trace stop reason
 +PASS: gdb.trace/tstatus.exp: tstatus does not report trace stop reason

which clearly easily goes by unnoticed, as evidenced by the existing
problem Yao's previous patch addressed.

Tested on x86_64 Fedora 17.

gdb/testsuite/
2013-03-06  Pedro Alves  <palves@redhat.com>

* gdb.trace/tstatus.exp (run_trace_experiment): When the target
doesn't support the tested optional feature, call "unsupported"
with the same test message as the "pass" case, instead of calling
"pass" with a different message.  Use the same text for the "fail"
cases too.

* linespec.c (get_current_search_block): ARI fix, use (void)
for empty parameter list.

gdb/testsuite/
* gdb.trace/tstatus.exp: Remove the invocation of
gdb_load_shlibs, gdb_compile, clean_restart and runto_main.
(test_tracepoints): Don't set fast tracepoint.
(top level): Don't check agent library is loaded or not.

gdb/testsuite/
* gdb.trace/tstatus.exp (run_trace_experiment): Escape
parentheses by "\\".

*** empty log message ***

daily update

* ada-lang.c (ada_lookup_symbol_list_worker): New function, contents
of old ada_lookup_symbol_list.  In !full_search case, don't
search superblocks.
(ada_lookup_symbol_list): Delete arg full_search, all callers
updated.  Call ada_lookup_symbol_list_worker.
(ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker.
* ada-lang.h (ada_lookup_symbol_list): Update.
* language.h (language_defn): Update comment for
la_iterate_over_symbols.
* linespec.c (iterate_over_file_blocks): New function.
(iterate_over_all_matching_symtabs): Call it.
(lookup_prefix_sym): Ditto.
(get_current_search_block): New function.
(get_search_block): Delete.
(find_label_symbols): Call get_current_search_block.
(add_matching_symbols_to_info): Call iterate_over_file_blocks.
* symtab.c (iterate_over_symbols): Don't search superblocks.

Add to the AArch64 GAS the missing support for hexadecimal-format
floating-point literal in the FMOV instruction.

gas/

* config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
add comment.
(aarch64_double_precision_fmovable): New function.
(parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
function; handle hexadecimal representation of IEEE754 encoding.
(parse_operands): Update the call to parse_aarch64_imm_float.

gas/testsuite/

* gas/aarch64/diagnostic.s: Add test.
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/illegal.s: Add test.
* gas/aarch64/illegal.l: Update.
* gas/aarch64/fpmov.s: New file.
* gas/aarch64/fpmov.d: New file.

Fix ChangeLog entry.

gdb/
* cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
parameter VAR's type from "unsigned int" to "int".
* command.h (var_zuinteger_unlimited): Update its comments.
(add_setshow_zuinteger_unlimited_cmd): Update the declaration.

* NEWS: Mention new target x86_64-*-cygwin*.

* configure.host: Add x86_64-*-cygwin* as host.
* configure.tgt: Add x86_64-*-cygwin* as target.
* config/i386/cygwin64.mh: New file.

* gdbserver/configure.srv: Add x86_64-*-cygwin* as target.

* configure.host: Add x86_64-*-cygwin* as valid host.
* configure.tgt: Add x86_64-*-cygwin* as valid target.
* emultempl/pep.em: Handle different requirements for Cygwin in terms
of start addresses for executables and DLLs, based on memory model in
http://cygwin.com/ml/cygwin-developers/2013-02/msg00027.html

* configure.in: Build DLL tools on x86_64-*-cygwin* as well.
* configure: Regenerate.

* config.bfd: Add x86_64-*-cygwin to list of supported targets.

PR ld/15222
ld/
* ldlang.c (lang_size_sections_1): When given an lma_region align
LMA as per VMA only if lma_region is the same as region.
ld/testsuite/
* ld-scripts/rgn-at6.s, * ld-scripts/rgn-at6.t, * ld-scripts/rgn-at6.d,
* ld-scripts/rgn-at7.t, * ld-scripts/rgn-at7.d: New tests.

*** empty log message ***

daily update

gdb/
* linespec.c (decode_line_2): Fix duplicate request off by two message.

gdb/
* linespec.c (struct linespec_canonical_name): New.
(struct linespec_state): Change canonical_names type to it.
(add_sal_to_sals): Change variable canonical_name to canonical.  Change
xrealloc element size.  Initialize the different CANONICAL fields.
(canonical_to_fullform): New.
(filter_results): Use it.  Add variables canonical, fullform and
cleanup.
(struct decode_line_2_item, decode_line_2_compare_items): New.
(decode_line_2): Remove variables iter and item_names, add variables
items and items_count.  Modify the code for these new variables.

gdb/testsuite/
* gdb.linespec/base/one/thefile.cc (twodup): New.
(m): Call it.
* gdb.linespec/base/two/thefile.cc (dupname): New.
(n): Call it.
* gdb.linespec/break-ask.exp: New file.
* gdb.linespec/lspec.cc (body_elsewhere): New comment marker.

* coff-pe-read.c (read_pe_exported_syms): Don't return without
calling do_cleanup.

* elfcomm.c (error): Flush stdout before emitting the error
message.
(warn): Likewise.

2013-03-04  Luis Machado  <lgustavo@codesourcery.com>

* tracepoint.c (build_traceframe_info): Add code for byte order.

* elf32-ppc.c (ppc_elf_relocate_section <R_PPC_PLTREL24>): Adjust
non-zero addends when relocatable, rather than addends >= 32768.
Always zero "addend" before applying relocation.

* archive64.c (bfd_elf64_archive_write_armap): Fix calculation of
file pointer offsets for thin archives.

* testsuite/Makefile.am (final_layout_script.lds): Add .sbss.
* testsuite/Makefile.in: Regenerate.

*** empty log message ***

daily update

*** empty log message ***

daily update

Revise ChangeLog comment for recently committed change.

* v850-tdep.c: (v850e2_register_name): (v850e2_reg_names):
Revise system register names to match current V850E2M
architecture specifications.

Add RegRex64 to riz

* i386-reg.tbl (riz): Add RegRex64.
* i386-tbl.h: Regenerated.

Add tests for invalid addresses and riz/eiz

* gas/i386/inval.s: Add tests for invalid addresses and eiz.

* gas/i386/x86-64-inval.s: Add tests for invalid addresses and
riz/eiz.

* gas/i386/inval.l: Updated.
* gas/i386/x86-64-inval.l: Likewise.

 gdb/
     * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading
     to END_ADDR.
     (tilegx_skip_prologue): Limit prologue analysis to section end

*** empty log message ***

Restore patch lost in last merge from GCC.

include/
* dwarf2.h (enum dwarf_sect): New enum type.

Add dwp support for v2 DWARF package file format.

gold/
* dwarf_reader.cc (Dwarf_info_reader::visit_type_unit): Add
tu_length parameter.  Adjust all callers.
* dwarf_reader.h (Dwarf_info_reader::visit_type_unit): Likewise.
* dwp.cc: Include dwarf.h.
(Section_bounds): New struct type.
(Unit_set): New struct type.
(Dwo_file::Dwo_file): Initialize new data member.
(Dwo_file::read_compunit_index, Dwo_file::read_typeunit_index):
Combine and rename to...
(Dwo_file::read_unit_index): ...this.
(Dwo_file::sized_read_compunit_index)
(Dwo_file::sized_read_typeunit_index): Combine and rename to...
(Dwo_file::sized_read_unit_index): ...this.
(Dwo_file::copy_section): Remove section_name, is_str_offsets
parameters; add section_id parameter.
(Dwo_file::add_cu_set, Dwo_file::add_tu_set): Combine and rename to...
(Dwo_file::add_unit_set): ...this.
(Dwo_file::shndx_map_): Remove.
(Dwo_file::sect_offsets_): New data member.
(Dwp_output_file::Dwp_output_file): Initialize new data members.
(Dwp_output_file::add_section): Rename to...
(Dwp_output_file::add_contribution): ...this.
(Dwp_output_file::add_cu_set): Combine parameters into a struct.
(Dwp_output_file::add_tu_set): Likewise.
(Dwp_output_file::Contribution): New type.
(Dwp_output_file::Section::contributions): New data member.
(Dwp_output_file::Cu_or_tu_set): Remove.
(Dwp_output_file::Section::Section): New ctor.
(Dwp_output_file::Dwp_index::Shndx_pool): Remove.
(Dwp_output_file::Dwp_index::Section_table): New type.
(Dwp_output_file::Dwp_index::Dwp_index): Initialize new data members.
(Dwp_output_file::Dwp_index::enter_set): Change type of "set"
parameter.
(Dwp_output_file::Dwp_index::shndx_pool): Remove.
(Dwp_output_file::Dwp_index::shndx_pool_end): Remove.
(Dwp_output_file::Dwp_index::section_table): New member function.
(Dwp_output_file::Dwp_index::section_table_end): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_size): Remove.
(Dwp_output_file::Dwp_index::section_table_rows): New member function.
(Dwp_output_file::Dwp_index::section_table_cols): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_): Remove.
(Dwp_output_file::Dwp_index::section_table_): New data member.
(Dwp_output_file::Dwp_index::section_mask_): New data member.
(Dwp_output_file::add_output_section): New member function.
(Dwp_output_file::write_new_section): New member function.
(Dwp_output_file::write_contributions): New member function.
(Dwp_output_file::section_id_map_): New data member.
(class Dwo_id_info_reader): Remove.
(class Unit_reader): New class.
(get_dwarf_section_name): New function.
(Dwo_file::read_executable): Adjust initializations of class data.
(Dwo_file::read): Add support for v2 package file format.
(Dwo_file::read_unit_index): Likewise.
(Dwo_file::sized_read_unit_index): Likewise.
(Dwo_file::copy_section): Likewise.
(Dwo_file::add_unit_set): Likewise.
(Dwp_output_file::add_output_section): Likewise.
(Dwp_output_file::add_contribution): Likewise.
(Dwp_output_file::Dwp_index::find_or_add): Use row index to check
for empty slot.
(Dwp_output_file::Dwp_index::enter_set): Add support for v2 package
file format.
(Dwp_output_file::Dwp_index::grow): Use row index to check for empty
slot.
(Dwp_output_file::initialize): Remove unused function.
(Dwp_output_file::finalize): Add support for v2 package file format.
(Dwp_output_file::write_index): Likewise.
* gdb-index.cc (Gdb_index_info_reader::visit_type_unit): Adjust
function prototype.

merge from gcc

daily update

gold/
* dwarf_reader.cc (Dwarf_info_reader::check_buffer): Move
function into class definition in header file.
(Dwarf_info_reader::warn_corrupt_debug_section): New function.
* dwarf_reader.h (Dwarf_info_reader::warn_corrupt_debug_section):
New function.
(Dwarf_info_reader::check_buffer): Move here from .cc file.

elfcpp/
* dwarf.h (enum DW_LANG): Adjust spacing for consistency.
(enum DW_SECT): New enum type.

gdb/
* dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc,
use it.

binutils/
* dwarf.c (cu_tu_indexes_read, shndx_pool, shndx_pool_size)
(shndx_pool_used): Move to top of file.
(struct cu_tu_set): New type.
(cu_count, tu_count, cu_sets, tu_sets): New file scope variables.
(fetch_indexed_string): Add "this_set" parameter.  Update all callers.
(find_cu_tu_set_v2): New function.
(read_and_display_attr_value): Add "this_set" parameter.
(read_and_display_attr): Likewise.
(process_debug_info): Track base offsets for DWARF package files.
(load_debug_info): Call load_cu_tu_indexes.
(get_DW_SECT_short_name): New function.
(process_cu_tu_index): Add support for version 2 DWARF package files.

include/
* dwarf2.h (enum dwarf_sect): New enum type.

Use gdb_byte for bytes from the program being debugged.

gdb_byte should be used for bytes from the program being debugged.  We
have many places using char or unsigned char instead all over the
existing ports, and more ends up added over time due to copy/paste as
new code is based on old code.

I've greped the tree for "char buf[", and fixed all I found.

Tested by building with --enable-targets=all.

2013-03-01  Pedro Alves  <palves@redhat.com>

Use gdb_byte for bytes from the program being debugged.

* arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
Change type of local 'buf' to gdb_byte.
* avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
(frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Likewise.
* frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
(hppa32_hpux_search_dummy_call_sequence)
(hppa_hpux_supply_save_state): Likewise.
* hppa-linux-tdep.c (insns_match_pattern)
(hppa_linux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_in_function_epilogue_p)
(skip_prologue_hard_way, hppa_frame_cache): Likewise.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
* i386fbsd-tdep.c (i386fbsd_supply_uthread)
(i386fbsd_collect_uthread): Likewise.
* ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
* ia64-tdep.c (examine_prologue, ia64_frame_cache)
(ia64_frame_prev_register, ia64_sigtramp_frame_cache)
(ia64_sigtramp_frame_prev_register, ia64_access_reg)
(ia64_access_rse_reg, ia64_libunwind_frame_this_id)
(ia64_libunwind_frame_prev_register)
(ia64_libunwind_sigtramp_frame_this_id)
(ia64_find_global_pointer_from_dynamic_section)
(find_extant_func_descr, find_func_descr, ia64_dummy_id)
(ia64_unwind_pc): Likewise.
* iq2000-tdep.c (iq2000_store_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call)
(m68hc11_extract_return_value): Likewise.
* m68klinux-nat.c (fetch_register, store_register): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
(mep_get_insn, mep_push_dummy_call): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips_linux_in_dynsym_stub): Likewise.
* mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
* ppc-linux-nat.c (fetch_register, store_register): Likewise.
* regcache.c (dump_endian_bytes): Change type of parameter 'buf'
to gdb_byte.
* remote-mips.c (mips_set_register): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* score-tdep.c (score7_fetch_inst): Change type of parameter
'memblock' and local 'buf' to gdb_byte.
(score7_malloc_and_get_memblock): Change return type to gdb_byte.
Change type of local 'buf' to gdb_byte.  Adjust.
(score7_adjust_memblock_ptr): Change type of parameter 'memblock'
to gdb_byte**.
(score7_analyze_prologue): Change type of 'memblock' and
'memblock_ptr' locals to gdb_byte*.
* sh64-tdep.c (sh64_extract_return_value)
(sh64_store_return_value): Change type of local 'buf' to gdb_byte.
* solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
* solib-pa64.c (pa64_solib_create_inferior_hook)
(pa64_open_symbol_file_object): Remove local 'buf'.
* solib-som.c (som_solib_create_inferior_hook, link_map_start)
(som_open_symbol_file_object): Likewise.
* solib-spu.c (spu_current_sos): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
(spu_store_registers): Likewise.
* target.c (debug_print_register): Likewise.
* tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
* xstormy16-tdep.c (xstormy16_store_return_value)
(xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
(xstormy16_find_jmp_table_entry): Likewise.

Revise the commit date of my ChangeLog entry.

Implement get_longjmp_target for tilegx.

  gdb/
      * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
      (tilegx_gdbarch_init): Install it.

Add missing file from the previous commit.
(forget to "cvs add" it)

*** empty log message ***

daily update

Replace have_hle with hle_prefix

* config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
(check_hle): Updated.
(md_assemble): Likewise.
(parse_insn): Likewise.

Optimize REP prefix check

gas/

* config/tc-i386.c (_i386_insn): Add rep_prefix.
(md_assemble): Check if REP prefix is OK.
(parse_insn): Remove expecting_string_instruction.  Set
i.rep_prefix.

gas/testsuite/

* gas/i386/i386.exp: Run inval-rep and x86-64-inval-rep.

* gas/i386/inval-rep.l: New file.
* gas/i386/inval-rep.s: Likewise.
* gas/i386/x86-64-inval-rep.l: Likewise.
* gas/i386/x86-64-inval-rep.s: Likewise.

* python/py-arch.c (archpy_disassemble): Use PyInt_Check and
PyLong_Check.

* python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
* python/python.c (gdbpy_find_pc_line): Ditto.

* contrib/excheck.py: New file.
* contrib/exsummary.py: New file.
* contrib/gcc-with-excheck: New file.

* python/python.c (gdbpy_print_stack): Call begin_line and
fprintf_filtered inside TRY_CATCH.

* python/python.c (gdbpy_find_pc_line): Call find_pc_line
inside TRY_CATCH.

* py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
frame_object_to_frame_info inside TRY_CATCH.

include/opcode/

* aarch64.h (AARCH64_FEATURE_CRC): New macro.

opcodes/

* aarch64-tbl.h (QL_I3SAMEW, QL_I3WWX): New macros.
(aarch64_feature_crc): New static.
(CRC): New macro.
(aarch64_opcode_table): Add entries for the crc32b, crc32h, crc32w,
crc32x, crc32cb, crc32ch, crc32cw and crc32cx instructions.
* aarch64-asm-2.c: Re-generate.
* aarch64-dis-2.c: Ditto.
* aarch64-opc-2.c: Ditto.

gas/

* config/tc-aarch64.c (aarch64_features): Add the 'crc' option.

gas/testsuite/

* gas/aarch64/crc32.s: New test.
* gas/aarch64/crc32.d: Ditto.

* py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
TRY_CATCH.

* objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.

gas/

* config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
for system registers.

gas/testsuite/

* gas/aarch64/illegal.l: Delete the error message for
msr S3_1_C13_C15_1,x7.
* gas/aarch64/sysreg.s: Add new tests.
* gas/aarch64/sysreg.d: Update.

* configure.ac: Invoke AC_SYS_LARGEFILE.
* configure, config.in: Rebuild.

bfd/
    * elf32-arm.c (elf32_arm_size_dynamic_sections): Don't call
    elf32_arm_allocate_dynrelocs for source reloc for non-dynamic link.

    ld/testsuite/
    * ld-arm/tls-local-static.s: New test.
    * ld-arm/tls-local-static.d: New.
    * ld-arm/arm-elf.exp (tls-local-static): Add test.

* win32-low.c: Throughout, fix format strings and casts of
printf-like functions to avoid type related warnings on all
platforms.
(get_child_debug_event): Print dwDebugEventCode as hex since
that's how it's usually documented.

gdb/gdbserver/

* tracepoint.c (cmd_qtbuffer): Call phex_nz instead of
pulongest.

gdb/gdbserver/
* gdb.trace/report.exp: Move some code to ...
(use_collected_data): New.
(top level): Call use_collected_data once on the live target.
Save at file of the current trace session, load it with target
tfile, and call use_collected_data again.

*** empty log message ***

* target.h (Target::plt_fde_location, do_plt_fde_location): Declare.
* target.cc (Target::do_plt_fde_location): New function.
* ehframe.h (class FDE): Add post_map field to u_.from_linker,
accessor function, and constructor param.
(struct Post_fde, Post_fdes): Declare.
(Cie::write): Add post_fdes param.
* ehframe.cc (Fde::write): Use plt_fde_location.
(struct Post_fde): Define.
(Cie::write): Stash FDEs added post merge mapping.
(Eh_frame::add_ehframe_for_plt): Assert no new CIEs after mapping.
Adjust Fde constructor call.  Bump final_data_size_ for post map FDEs.
(Eh_frame::do_sized_write): Arrange to write post map FDES after
other FDEs.
* powerpc.cc (Target_powerpc::do_plt_fde_location): New function.
(Target_powerpc::has_glink): New function.
(Target_powerpc::do_relax): Add eh_frame info for stubs.
(struct Eh_cie, eh_frame_cie, glink_eh_frame_fde_64,
glink_eh_frame_fde_32, default_fde): New data.
(Stub_table::eh_frame_added_): New var.
(Stub_table::find_long_branch_entry, stub_address, stub_offset):
Make const.
(Stub_table::add_eh_frame): New function.
(Output_data_glink::add_eh_frame): New function.
(Target_powerpc::make_glink_section): Call add_eh_frame.

daily update

* reloc.c (BFD_RELOC_RL78_CODE): Add.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
* elf32-rl78.c (rl78_elf_relocate_section): Handle weak code
references in compuated relocs.

* config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
(rl78_op): Handle %code().
(rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
(tc_gen_reloc): Likwise; convert to a computed reloc.
(md_apply_fix): Likewise.

* windows-nat.c: Throughout, fix format strings and casts of
printf-like functions to avoid type related warnings on all
platforms.
(handle_output_debug_string): Fetch context information address
from debug string using string_to_core_addr.

gdb/testsuite/
* gdb.threads/fork-thread-pending.c (main): Add alarm.

gdb/testsuite/
* gdb.base/valgrind-infcall.exp (valgrind_pid): New variable.
Add final kill of ${valgrind_pid}.

  gdb/
* regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
* regformats/reg-tilegx32.dat: New.

  gdbserver/

* Makefile.in (clean): Remove reg-tilegx.c, reg-tilegx32.c.
(reg-tilegx32.c): New rule.
* configure.srv (tilegx-*-linux*): Add reg-tilegx32.o to srv_regobj.
* linux-tile-low.c (tile_arch_setup): New function.  Invoke
different register info initializer according to elf class.
(init_registers_tilgx32): New function.  The tilegx32 register info
initializer.
(tile_fill_gregset): Use "uint_reg_t" to represent register size.
(tile_store_gregset): Likewise.

  gdb/
      * configure.tgt (tilegx-*-linux*): Enable gdbserver.

  gdb/
     * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.

gdb/gdbserver/
* server.c (process_point_options): Print debug message when
debug_threads is true.

PR binutils/15191
* readelf.c (offsetof): Define.
(CHECK_ENTSIZE_VALUES): Remove extraneous indefinite article.
(process_corefile_note_segment): Allow notes without name or
desc.  Combine out-of-range checks.  Disallow "negative"
notesz or descsz.

* scripttempl/elf32msp430.sc: Add placement of .data.* sections.
Add alignment of .bss section.
* scripttempl/elf32msp430_3.sc: Likewise.

* rl78-decode.opc (rl78_decode_opcode): Fix typo.
* rl78-decode.c: Regenerate.

gdb/
2013-02-27  Yao Qi  <yao@codesourcery.com>
    Pedro Alves  <palves@redhat.com>

* tracepoint.c (tfile_trace_find): For tfind
     pc/tp/range/outside, look for the next trace frame instead of
     always starting from frame 0.