package/sdl2: fix build with kmsdrm

Build with kmsdrm is broken since bump to version 2.0.14 in commit
5e0da5c40da82d90c3f6ca037170838a6689b65b. Indeed, first patch was
already applied in this version:
https://github.com/libsdl-org/SDL/commit/9354aea19834ada7ffb90d379600a242a7aa820f
but upstream made other changes that requires EGL so add an upstream
patch to fix the build failure

Moreover, run autogen.sh instead of autoreconf as it breaks the build
and is not recommended by upstream:
https://github.com/libsdl-org/SDL/pull/4214

Fixes:
 - http://autobuild.buildroot.org/results/355c7e5092e7641d8b04ecb550e2671d70720bd2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: add dependency on host-autoconf]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/sdl2: kmsdrm needs GBM

kmsdrm needs GBM (and so mesa3d) since its addition in version 2.0.6:
https://github.com/libsdl-org/SDL/commit/56363ebf6124b345e1cfbd14fb6c0e654837910c

If libgbm is not found, kmsdrm will be silently disabled

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/lua-lunix: fix sys/sysctl.h detection

sysctl.h has been removed from glibc since version 2.32.

Fixes: http://autobuild.buildroot.net/results/749a11d5289c6fec3b2f236b9073fc1ab730d090/
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Config.in: disable Fortify Source for microblaze

As reported by Toolchain-builder project [1], the microblaze glibc
toolchain creates a system that doesn't boot when FORTIFY_SOURCE is
enabled: the init process hangs.

Also, hardening features may not be wanted or possible for such
slow soft-core cpus [2].

Note: for completeness, BR2_RELRO_PARTIAL was manually tested and it
does boot.

[1] https://gitlab.com/bootlin/toolchains-builder/-/jobs/1467624500
[2] http://lists.busybox.net/pipermail/buildroot/2021-June/312416.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libressl: always expose SSL_OP_NO_TLSv1_3

Fixes the build of vsftpd 3.0.4

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kvm-unit-tests: fix powerpc64 PHDR seg err

Upstream comment: "Let's introduce some fake PHDRs
to the linker script to get this working again."

Fixes:
(next) http://autobuild.buildroot.net/results/ae091dbcb155e63c208ce5adb289807cee83e28d/
(master) http://autobuild.buildroot.net/results/ef0/ef0b044802c54a697d8bffb28eba08cf9ce44f4c/
(2021.02.x) http://autobuild.buildroot.net/results/044/04495aa23ce51c48b9b850890453abded85dc477/
(2021.05.x) http://autobuild.buildroot.net/results/0fa/0fa94f1f930aa16cec3bc96e64bc57b460238a0a/

[Cherry-picked upstream]
5126732d73aa75a0bc84f898042bfe35640624b8

Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/polkit: install polkit.loc to HOST_DIR

Fix added by commit c20d31baf471daeeec50d62cb8baa79bac06fa51 is
incomplete as polkit.loc must also be added to
$(HOST_DIR)/share/gettext/its

Additionally, the destination path for "$(INSTALL) -D" must be a
fully-qualified filename, not just the destination directory.

Fixes:
 - http://autobuild.buildroot.org/results/170e4802b7b4e8e7dafa95ade549e8fd05e43bfd

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: dest must be a filename, not a directory]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libvirt: fix syntax error in Config.in

The typo was introduced in 6aa318d91e66731d66dca485c4c30391fe0e2423

Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/cpio: fix CVE-2021-38185

GNU cpio through 2.13 allows attackers to execute arbitrary code via a
crafted pattern file, because of a dstring.c ds_fgetstr integer overflow
that triggers an out-of-bounds heap write. NOTE: it is unclear whether
there are common cases where the pattern file, associated with the -E
option, is untrusted data.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mpv: fix build of vaapi with egl-drm

Build of vaapi with egl-drm is broken since commit
6ec47c4e59c7c8c57e972dab985c8a2ba0bf7174 because egl-drm is a part of gl
group which is only enabled if BR2_PACKAGE_HAS_LIBGL or
BR2_PACKAGE_HAS_LIBGLES are set:
https://github.com/mpv-player/mpv/blob/ec0006bfa1aaf608a7141929f2871c89ac7a15d6/wscript#L572

As a result, despite what is being displayed in the autobuilder log
message, the build failure is not related to X11 but to the fact that
we try to enable vaapi through egl-drm but at the same time, we disable
gl.

To fix it, enable gl if libegl is available as gl can be enabled for
example through wayland and egl (gl-wayland):

'deps': 'gl-cocoa || gl-x11 || egl-x11 || egl-drm || '
+ 'gl-win32 || gl-wayland || rpi || '
+ 'plain-gl',

Fixes:
 - http://autobuild.buildroot.org/results/e5c15228f42a73f8c34b26630b2074c30e5f5966

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mpv: vaapi-drm needs egl-drm

Build of vaapi-drm without egl-drm is broken since commit
6ec47c4e59c7c8c57e972dab985c8a2ba0bf7174.

egl-drm has been added with commit
031df474c24f92757ac95ade572b90995ebdc6a2 and it is only available with
mesa3d because of the gbm dependency:
https://github.com/mpv-player/mpv/blob/0b56e1c00a57fdb767674462c299a5c973a9e373/wscript#L571

Indeed, at the moment, mesa3d is the only gbm provider in buildroot.

Fixes:
 - http://autobuild.buildroot.org/results/83d6dcbb77ab8754aefcdcf90baeaff9db2a1c81

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libmcrypt: drop package

Drop libmcrypt which is a cryptographic package that is not maintained
anymore. Here is an extract of https://en.wikipedia.org/wiki/Mcrypt:
"The last update to libmcrypt was in 2007, despite years of unmerged
patches. These facts have led security experts to declare mcrypt
abandonware and discourage its use in new development.".

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mcrypt: drop package

Drop mcrypt which is a cryptographic package that is not maintained
anymore. Here is an extract of https://en.wikipedia.org/wiki/Mcrypt:
"The last update to libmcrypt was in 2007, despite years of unmerged
patches. These facts have led security experts to declare mcrypt
abandonware and discourage its use in new development."

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libvirt: fix dependency of comment

d1fc0690addd (package/libvirt: fix dependencies on kernel headers)
forgot to update the conditions for the comment after the last-minute
changes by Yann.

Fix that.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libvirt: fix dependencies on kernel headers

In ccfc90e1010e (package/libvirt: new package), last-minute changes
missed the depenecny on kernel headers; headers >= 3.12 are required for
all architectures, but AArch64, which requires 4.11 for HWCAP_CPUID:

    ../src/cpu/cpu_arm.c: In function 'virCPUarmCpuDataFromRegs':
    ../src/cpu/cpu_arm.c:562:20: error: 'HWCAP_CPUID' undeclared (first use in this function); did you mean 'HWCAP_PMULL'?
         if (!(hwcaps & HWCAP_CPUID)) {
                        ^~~~~~~~~~~
                        HWCAP_PMULL

Fixes:
 - http://autobuild.buildroot.org/results/85bf7b4dad73a748bf439e63874eb64d9a53088f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
  - move AArch64 4.11 req. from _ARCH_SUPPORTS to BR2_PACKAGE_LIBVIRT
  - add missing dependency on headers 3.12 for the rest
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rust-bin: harmonize indentation

Use an indentation of two spaces everywhere

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/heirloom-mailx: fix build failure due to gcc bug 101916

The heirloom-mailx package exhibits gcc bug 101916 when built for the
SH4 architecture with optimization enabled, which causes a build failure.

As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101916=y.
Also introduce HEIRLOOM_MAILX_CFLAGS as done for other packages and move
the already present -fPIC CFLAG to it.

Fixes:
http://autobuild.buildroot.net/results/911/911f5c024834741754102ff1bbb05c4a64c54a0b/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_101916

heirloom-mailx package fails to build for the SH4 architecture with
optimization enabled with gcc = 11.1.0:
http://autobuild.buildroot.net/results/911/911f5c024834741754102ff1bbb05c4a64c54a0b/

It's been reported upstream:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101916

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lmbench: fix build failure due to gcc bug 101915

The lmbench package exhibits gcc bug 101915 when built for the
Microblaze architecture with optimization enabled, which causes a build
failure.

As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101915=y.

Fixes:
http://autobuild.buildroot.net/results/ae1/ae1e4d61ed367c6cb64442c60d98882cc7985346/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_101915

lmbench package fails to build for the Microblaze architecture with
optimization enabled with gcc = 11.1.0:
http://autobuild.buildroot.net/results/ae1/ae1e4d61ed367c6cb64442c60d98882cc7985346/

It's been reported upstream:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101915

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump CIP RT kernel to version 4.19.198-cip54-rt21

This patch bumps Linux CIP RT to version 4.19.198-cip54-rt21

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump CIP kernel to version 4.19.198-cip54

This patch bumps Linux CIP to version 4.19.198-cip54.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gdb: fix build of gdb on riscv

Build of gdb on riscv without host-gdb is broken since commit
4ecd247ead22a6cfb87a4ffafc4be05201328aef because BR2_GDB_VERSION_10 is
never defined if BR2_PACKAGE_HOST_GDB is not selected resulting in the
following build failure:

/bin/bash: line 0: cd: /tmp/instance-0/output-1/build/gdb-10.1/gdb/gdbserver: No such file or directory

So add a BR2_PACKAGE_GDB_TOPLEVEL hidden option as suggested by Thomas
Petazzoni.

Fixes:
 - http://autobuild.buildroot.org/results/ce47d616ee79d5f735779570ebc3b4a9c0f64c6a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gdb: bump version 10.x to 10.2

Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "package/libshout: enable optional dependency for libressl"

This reverts commit 46b8fb7500ecca65a79507318fd3052208559c09 indeed if
libressl is selected as the openssl provider, the BR2_PACKAGE_OPENSSL
conditition will always be used and the BR2_PACKAGE_LIBRESSL condition
will never be triggered. Moreover, libressl provides a pkg-config file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/haproxy: security bump to version 2.4.3

Fixes the following security issues:

- CVE-2021-39240: An issue was discovered in HAProxy 2.2 before 2.2.16, 2.3
  before 2.3.13, and 2.4 before 2.4.3.  It does not ensure that the scheme
  and path portions of a URI have the expected characters.  For example, the
  authority field (as observed on a target HTTP/2 server) might differ from
  what the routing rules were intended to achieve.

- CVE-2021-39241: An issue was discovered in HAProxy 2.0 before 2.0.24, 2.2
  before 2.2.16, 2.3 before 2.3.13, and 2.4 before 2.4.3.  An HTTP method
  name may contain a space followed by the name of a protected resource.  It
  is possible that a server would interpret this as a request for that
  protected resource, such as in the "GET /admin?  HTTP/1.1 /static/images
  HTTP/1.1" example.

- CVE-2021-39242: An issue was discovered in HAProxy 2.2 before 2.2.16, 2.3
  before 2.3.13, and 2.4 before 2.4.3.  It can lead to a situation with an
  attacker-controlled HTTP Host header, because a mismatch between Host and
  authority is mishandled.

For more details, see the advisory:
https://www.mail-archive.com/haproxy@formilux.org/msg41041.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sentry-cli: remove package

This package has had build failures for a very long time, and these
issues have not been fixed, and it is now the number 1 build failure
reason in our autobuilders. It is time to acknowledge that the package
needs to be removed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openvmtools: fix time_t build failure on 32-bit platforms

Add upstream pending patch[1] to fix time_t on 32-bit platform.

[1]: https://github.com/vmware/open-vm-tools/pull/387

Fixes:
http://autobuild.buildroot.net/results/eb3dfe679536b578a0f16762312a96ada7162095/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libvirt: fix NLS build

Fix the following build failure raised since the addition of the package
in commit ccfc90e1010e42e6529afae3a5ea8bf7226dabc1:

/tmp/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i686-buildroot-linux-uclibc/9.3.0/../../../../i686-buildroot-linux-uclibc/bin/ld: src/util/libvirt_util.a(viralloc.c.o): in function `virInsertElementsN':
viralloc.c:(.text+0x167): undefined reference to `libintl_dgettext'

Fixes:
 - http://autobuild.buildroot.net/results/2349c55a4a42f08ca52700c60cda3065b0c4bd88

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/at91bootstrap3: update to final 4.0.0 version

Update to AT91Bootstrap 4.0.0 version.

This package is now released under MIT license, and a license file was
added.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bullet: fix build failure due to gcc bug 101952

The bullet package exhibits gcc bug 101952 when built for the SH4
architecture with optimization enabled, which causes a build failure.

As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101952=y like we
already do for BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y.

Fixes:
http://autobuild.buildroot.net/results/32b/32bfaf0aae57ed18c18e82a72a958af9b3e1b241/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_101952

bullet package fails to build for the SH4 architecture with optimization
enabled with gcc = 11.1.0:
http://autobuild.buildroot.net/results/32b/32bfaf0aae57ed18c18e82a72a958af9b3e1b241/

It's been reported upstream:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101952

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add myself to toolchain topics/packages

Since I've dealt and deal with toolchain bugs and their work-around
very often add myself to toolchain topic(toolchain/) as well as
package/binutils and package/gcc.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/eigen: override Fortran path

The language detection is falling back to the host system
Fortran compiler. An example of this is in RHEL7.9
(gcc4.8.5 20150623 (Red Hat 4.8.5-44)).

This patch bypasses detection and points to the location
where the compiler would be installed (if present). In the
cases where it doesn't exist, the detection falls through
and leaves Fortran disabled.

Fixes:
http://autobuild.buildroot.net/results/8354da225d1e5e337aa7ea62a7e6524fb5f1135f/

Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rustc: fix conditions related to MIPS support

For MIPS64 architecture variants supported by Rust, we need to exclude
MIPS64R6, but due to a copy/paste mistake in commit
d69d40c029dc7d8199b745eaee759d92b66c5d17 ("package/rustc: add support
for Tier 1 and Tier 2 platform"), we used BR2_MIPS_CPU_MIPS32R6 for
both MIPS 32-bit and MIPS 64-bit configurations, while
BR2_MIPS_CPU_MIPS64R6 should be used on MIPS 64-bit.

Fixes:

  http://autobuild.buildroot.net/8bab232eb98b164df300581ae019254bde7c8ca3/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/nvidia-driver: fix build without X.org drivers

Fix the following build failure without BR2_PACKAGE_NVIDIA_DRIVER_XORG
raised since commit 9cda982855315d683d4880e6bb2a129133ea7213:

ln: failed to create symbolic link '/tmp/instance-0/output-1/target/usr/lib/xorg/modules/extensions/libglx.so': No such file or directory

Fixes:
 - http://autobuild.buildroot.org/results/c2e7a826c105363309f70a3fcfe28bd53efcb94a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

Update for 2021.08-rc2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/postgresql: security bump version to 13.4

Release notes:
https://www.postgresql.org/about/news/postgresql-134-128-1113-1018-9623-and-14-beta-3-released-2277/

Fixes CVE-2021-3677:
https://www.postgresql.org/support/security/CVE-2021-3677/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/{atmel, microchip}: bump at91bootstrap3 version

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/acmesystems_*: bump at91bootstrap3 version

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

boot/at91bootstrap3: bump 3.x series to 3.10.3

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/protobuf: fix build failure due to missing -mcmodel=large

When building protobuf for or1k -mcmodel=large is needed to link, so let's
add that gcc option in case we're building for or1k.

Upstream gcc doesn't have the -mcmodel=large option for or1k, but all
released Buildroot gcc versions have the patch to add it, so that's
fine.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libgeos: fix build failure due to missing -mcmodel=large

When building libgeos for or1k -mcmodel=large is needed to link, so let's
add that gcc option in case we're building for or1k.

Upstream gcc doesn't have the -mcmodel=large option for or1k, but all
released Buildroot gcc versions have the patch to add it, so that's
fine.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gcc: add OpenRisc patches for gcc version 11.1.0

At the moment of gcc 11.1.0 release the OpenRisc patches for -mcmodel=large
were still pending. They have been upstreamed yesterday as pointed in gcc
bugzilla[1]. So they will be part of gcc 11.3.0 or maybe before on 11.2.
2. Anyway at the moment if we try to build packages libgeos and protobuf
with OpenRisc gcc 11.1.0 it fails due to missing -mcmodel=large. So let's
add OpenRisc patches for it as done for all the previous versions.

Fixes:
still not appeared on autobuilers

[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99783

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/tor: security bump version to 0.4.6.7

Fixes CVE-2021-38385: https://blog.torproject.org/node/2062

Rebased patch 0001.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-treq: depend comment on BR2_PACKAGE_PYTHON3

The user shouldn't see the comment on the python2 menu.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-service-identity: depend comment on BR2_PACKAGE_PYTHON3

The user shouldn't see the comment on the python2 menu.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-secretstorage: depend comment on BR2_PACKAGE_PYTHON3

The user shouldn't see the comment on the python2 menu.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-pyopenssl: depend comment on BR2_PACKAGE_PYTHON3

The user shouldn't see the comment on the python2 menu.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-keyring: depend comment on BR2_PACKAGE_PYTHON3

The user shouldn't view the comment on the python2 menu.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-cryptography: depend comment on BR2_PACKAGE_PYTHON3

The user shouldn't see the comment on the python2 menu.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libbpf: needs headers >= 4.13

Since its addition in commit f7b8508e4fe9c96bf679cc5423cc1500b6523e83,
libbpf unconditionally uses TCA_BPF_ID which is only available since
kernel 4.13 and
https://github.com/torvalds/linux/commit/e86283071fb0eed28136adb52997888f4beb202b:

netlink.c: In function '__get_tc_info':
netlink.c:515:11: error: 'TCA_BPF_ID' undeclared (first use in this function); did you mean 'TCA_BPF_FD'?
  515 |  if (!tbb[TCA_BPF_ID])
      |           ^~~~~~~~~~
      |           TCA_BPF_FD

Fixes:
 - http://autobuild.buildroot.org/results/14996a0b7b9b65d0d6d5717d6da8922752789749

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/fontconfig: fix build with NLS

Add TARGET_NLS_DEPENDENCIES and host-gettext dependency to avoid the
following build failure in a per-package-directorie build with
host-cairo raised because fontconfig installs its ITS files in the wrong
directory (i.e. outside of gettext-tiny symlink):

mkdir -p /tmp/instance-0/output-1/per-package/host-cairo/host
rsync -a --link-dest=/tmp/instance-0/output-1/per-package/host-fontconfig/host/ /tmp/instance-0/output-1/per-package/host-fontconfig/host/ /tmp/instance-0/output-1/per-package/host-cairo/host
rsync -a --link-dest=/tmp/instance-0/output-1/per-package/host-freetype/host/ /tmp/instance-0/output-1/per-package/host-freetype/host/ /tmp/instance-0/output-1/per-package/host-cairo/host
rsync -a --link-dest=/tmp/instance-0/output-1/per-package/host-libglib2/host/ /tmp/instance-0/output-1/per-package/host-libglib2/host/ /tmp/instance-0/output-1/per-package/host-cairo/host
cannot delete non-empty directory: share/gettext
could not make way for new symlink: share/gettext

This only happens with per-package directories because then the rsync is
done. Otherwise the fontconfig installation will simply follow the
symlink.

The error of course exists for target as well, but doesn't occur in
autobuilders since it already fails for host.

Fixes:
 - http://autobuild.buildroot.org/results/00e29958cecfffa4e994ab549637117dd8f55c30

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/fontconfig: break circular dependency

Build fails because of the following circular dependency:

fontconfig -> util-linux -> udev -> systemd -> polkit ->
gobject-introspection -> cairo -> fontconfig

which results in the following build failure:

checking for UUID... no
checking where uuid functions comes from... configure: error:
*** uuid is required. install util-linux.

To break it, apply the same ugly workaround that was applied for
libglib2 and cryptsetup until a better solution is found:
https://patchwork.ozlabs.org/project/buildroot/patch/20201101150619.1709959-1-fontaine.fabrice@gmail.com/

Fixes:
 - http://autobuild.buildroot.org/results/2c6ef073e7e98e13daa409e1ea6130e9abd32c87

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/busybox/udhcpc.script: ensure action argument is correctly passed to hook scripts

commit f79a420825479c47d (package/busybox/udhcpc.script: support RFC3442
static routes) used 'set --' clobbering the positional arguments, causing
the action argument to not be correctly forwarded to hook scripts for the
renew / bound cases if static routes are provided by the server.

As a workaround, save the action argument at the beginning of the script and
use that when calling hook scripts.

Reported-by: 王琦 <wangwangqi2011@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/harfbuzz: fix build without threads

Fix the following build failures without threads by defining HB_NO_MT as
specified in https://github.com/harfbuzz/harfbuzz/blob/main/CONFIG.md:

In file included from ../src/hb.hh:458,
                 from ../src/hb-blob.cc:28:
../src/hb-mutex.hh:88:2: error: #error "Could not find any system to define mutex macros."
   88 | #error "Could not find any system to define mutex macros."
      |  ^~~~~

This build failure is raised since bump to version 2.8.1 in commit
e9ba1c80e8ebf5f5ad9d889d2dd37f27af87e811 and
https://github.com/harfbuzz/harfbuzz/commit/711c241f6c7e18c5403602375a733af74df76f83
which removed busyloop mutex implementation.

Fixes:
 - http://autobuild.buildroot.org/results/0c03aca5e3ade735b54b0b9233896b868aec1520

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libepoxy: bump to version 1.5.9

Update to libepoxy 1.5.9, which adds a fallback to use libOpenGL.so that
fixes a couple of regressions:

  https://github.com/anholt/libepoxy/releases/tag/1.5.9

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/arm-trusted-firmware: don't force ENABLE_STACK_PROTECTOR

Commit 5f432df7e2d2 ("boot/arm-trusted-firmware: change
ENABLE_STACK_PROTECTOR value when disabled") set
ENABLE_STACK_PROTECTOR=0 when disabled. But since we pass this value as
MAKE_OPT, the internal ATF logic that sets ENABLE_STACK_PROTECTOR again
based on its initial value breaks. This leads to build failure:

make[1]: *** [/builds/buildroot.org/buildroot/output/build/arm-trusted-firmware-v2.4/build/a80x0_mcbin/release/libc/assert.o] Error 1
aarch64-buildroot-linux-uclibc-gcc.br_real: error: unrecognized command-line option ‘-fstack-protector-0’; did you mean ‘-fstack-protector’?

Move ENABLE_STACK_PROTECTOR to make environment instead to allow make to
change its value.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1497663294

Cc: Dick Olsson <hi@senzilla.io>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libargtable2: update LIBARGTABLE2_VERSION

Update LIBARGTABLE2_VERSION to reflect what is used by
https://release-monitoring.org

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/iozone: update IOZONE_VERSION

Update IOZONE_VERSION to reflect what is used by
https://release-monitoring.org

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sqlite: add SQLITE_TAR_VERSION

3.35.0 is the version used by https://release-monitoring.org as well as
NVD NIST database so add SQLITE_TAR_VERSION and drop
SQLITE_CPE_ID_VERSION

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/unbound: bump to version 1.13.2

The release contains a bugfix to fix the make install of the python
module after build changes introduced in this release RC1.

This release contains a number of bug fixes. There is a crash fix for
broken internal structures in stream reuse, that is used when many TCP
or TLS upstream connections are made. Also a number of features are added.

https://github.com/NLnetLabs/unbound/releases/tag/release-1.13.2

Signed-off-by: Kyle Harding <kyle@balena.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/go: security bump to version 1.16.7

go1.16.7 (released 2021-08-05) includes a security fix to the
net/http/httputil package, as well as bug fixes to the compiler, the
linker, the runtime, the go command, and the net/http package.

https://golang.org/doc/devel/release#go1.16

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: drop Sven Fischer

Sven has privately asked to no longer receive notifications related to
this package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/refpolicy: fix build with samba

Fix the following build failure with samba raised since commit
49f6b2f39ee23e3e53c0b001894644734b8338b6:

 Compiling targeted policy.31
 env LD_LIBRARY_PATH="/tmp/instance-5/output-1/host/lib:/tmp/instance-5/output-1/host/usr/lib" /tmp/instance-5/output-1/host/usr/bin/checkpolicy -c 31 -U deny -S -O -E policy.conf -o policy.31
 policy/modules/services/samba.te:399:ERROR 'type crack_db_t is not within scope' at token ';' on line 360232:
  allow smbd_t crack_db_t:dir { getattr search open };
 #line 399
 checkpolicy:  error(s) encountered while parsing configuration

Fixes:
 - http://autobuild.buildroot.org/results/ab7098948d1920e42fa587e07f0513f23ba7fc74

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gd: fix CVE-2021-38115

read_header_tga in gd_tga.c in the GD Graphics Library (aka LibGD)
through 2.3.2 allows remote attackers to cause a denial of service
(out-of-bounds read) via a crafted TGA file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-txtorcon: depend comment on BR2_PACKAGE_PYTHON3

The user shouldn't view the comment on the python2 menu.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/terminology: set eet path

Set eet path to avoid the following build failure raised since bump to
version 1.9.0 in commit 6ac557a54bb4613e79728ad96724e7681c9c3c18 and
https://git.enlightenment.org/apps/terminology.git/commit/?id=f15dd2881a5e87e7f3b03594983826f7480c12e7:

/home/buildroot/autobuild/instance-2/output-1/build/terminology-1.9.0/data/colorschemes/add_color_scheme.sh: 30: /home/buildroot/autobuild/instance-2/output-1/build/terminology-1.9.0/data/colorschemes/add_color_scheme.sh: /usr/bin/eet: not found

Fixes:
 - http://autobuild.buildroot.org/results/767acf73e4eade48cd3fdb43e9dd599ba7ef9661

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-matplotlib: merge dependency comments

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jszip: add JSZIP_CPE_ID_VENDOR

cpe:2.3:a:jszip_project:jszip is a valid CPE identifier for this
package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Ajszip_project%3Ajszip

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sylpheed: fix CVE-2021-37746

textview_uri_security_check in textview.c in Claws Mail before 3.18.0,
and Sylpheed through 3.7.0, does not have sufficient link checks before
accepting a click.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sylpheed: add SYLPHEED_CPE_ID_VENDOR

cpe:2.3:a:sylpheed_project:sylpheed is a valid CPE identifier for this
package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Asylpheed_project%3Asylpheed

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nginx-naxsi: fix build without x_forwarded_for

Fix the following build failure without x_forwarded_for raised since
bump to version 1.3 in commit 3335c8d8685119ebb5b2a9a6e575f3a5337c4d90:

/home/buildroot/autobuild/instance-3/output-1/build/nginx-naxsi-1.3/naxsi_src/naxsi_runtime.c: In function 'ngx_http_naxsi_data_parse':
/home/buildroot/autobuild/instance-3/output-1/build/nginx-naxsi-1.3/naxsi_src/naxsi_runtime.c:2846:20: error: 'ngx_http_headers_in_t' has no member named 'x_forwarded_for'
   if (r->headers_in.x_forwarded_for.nelts >= 1) {
                    ^

Fixes:
 - http://autobuild.buildroot.org/results/cdbc1536f6b5de3d4c836efa2f0dcaf0cdbb1462

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/poppler: fix build with gcc 11

Fix the following build failure with gcc 11:

In file included from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib/gthread.h:32,
                 from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib/gasyncqueue.h:32,
                 from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib.h:32,
                 from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/gobject/gbinding.h:28,
                 from /tmp/instance-0/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/glib-2.0/glib-object.h:22,
                 from /tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler.h:22,
                 from /tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler-action.cc:19:
/tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler-action.cc: In function 'GType poppler_dest_get_type()':
/tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler-private.h:155:13: error: argument 2 of '__atomic_load' must not be a pointer to a 'volatile' type
  155 |         if (g_once_init_enter (&g_define_type_id__volatile)) {                        \
      |             ^~~~~~~~~~~~~~~~~
/tmp/instance-0/output-1/build/poppler-0.84.0/glib/poppler-action.cc:28:1: note: in expansion of macro 'POPPLER_DEFINE_BOXED_TYPE'
   28 | POPPLER_DEFINE_BOXED_TYPE (PopplerDest, poppler_dest, poppler_dest_copy, poppler_dest_free)
      | ^~~~~~~~~~~~~~~~~~~~~~~~~

Fixes:
 - http://autobuild.buildroot.org/results/dfcaac6487aaeb10412c3fe72a23135f8a70fefe

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/postgis: bump version to 3.1.3

Release-notes: https://postgis.net/2021/07/02/postgis-3.1.3/

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pymupdf: depend on python3

According to the package documentation, python 3.6 or newer
is needed.

Fixes:
 - http://autobuild.buildroot.net/results/f857986b8c9b6d4a843f3694cae8527760540ed0/

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gobject-introspection: fix gidatadir

Since commit 521d387640d704f24caee51841388d98bcac739b gidatadir is
wrongly set to ${libdir}/../share, set it back to
${datadir}/gobject-introspection-1.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/prosody: security bump version to 0.11.10

fixes CVE-2021-37601
see https://blog.prosody.im/prosody-0.11.10-released/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jszip: fix CVE-2021-23413

This affects the package jszip before 3.7.0. Crafting a new zip file
with filenames set to Object prototype values (e.g __proto__, toString,
etc) results in a returned object with a modified prototype instance.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: add libfuse3 optional dependency

libfuse3 is an optional dependency which is enabled by default since
version 6.0.0 and
https://gitlab.com/qemu-project/qemu/-/commit/0c9b70d5900a5108e899edfdd6f3790f8cb6bdc2

So add this dependency and fix the following build failures on musl
raised since bump to version 6.0.0 in commit
6b86c9335fc3ff381878156c6243454d4b688df9:

../block/export/fuse.c: In function 'fuse_fallocate':
../block/export/fuse.c:563:23: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
  563 |     } else if (mode & FALLOC_FL_ZERO_RANGE) {
      |                       ^~~~~~~~~~~~~~~~~~~~
../block/export/fuse.c:563:23: note: each undeclared identifier is reported only once for each function it appears in
../block/export/fuse.c: In function 'fuse_lseek':
../block/export/fuse.c:639:19: error: 'SEEK_HOLE' undeclared (first use in this function)
  639 |     if (whence != SEEK_HOLE && whence != SEEK_DATA) {
      |                   ^~~~~~~~~
../block/export/fuse.c:639:42: error: 'SEEK_DATA' undeclared (first use in this function); did you mean 'SEEK_SET'?
  639 |     if (whence != SEEK_HOLE && whence != SEEK_DATA) {
      |                                          ^~~~~~~~~
      |                                          SEEK_SET

Fixes:
 - http://autobuild.buildroot.org/results/0196609043bd37543e6a0d17ffc2254302ea7ba3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tpm2-tools: fix build with gcc 4.8

Fix the following build failure with gcc 4.8 raised since bump to
version 4.3.2 in commit 91aa6efa8588bf7617cc4a640eb55052b524ceb7:

lib/tpm2_eventlog_yaml.c: In function 'yaml_uefi_var_unicodename':
lib/tpm2_eventlog_yaml.c:130:5: error: 'for' loop initial declarations are only allowed in C99 mode
     for(size_t i = 0; i < data->UnicodeNameLength; ++i, tmp += ret) {
     ^
lib/tpm2_eventlog_yaml.c:130:5: note: use option -std=c99 or -std=gnu99 to compile your code
lib/tpm2_eventlog_yaml.c: In function 'yaml_specid_algs':
lib/tpm2_eventlog_yaml.c:335:5: error: 'for' loop initial declarations are only allowed in C99 mode
     for (size_t i = 0; i < count; ++i, ++alg) {
     ^

Fixes:
 - http://autobuild.buildroot.org/results/018c75cfbb34006c0bca52dcc255ad6f9cc43b77

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mongodb: fix build with gcc 11

Fix the following build failure with gcc 11:

In file included from src/mongo/db/query/plan_cache.h:36,
                 from src/mongo/db/catalog/collection_info_cache.h:33,
                 from src/mongo/db/catalog/collection.h:42,
                 from src/mongo/db/exec/requires_collection_stage.h:32,
                 from src/mongo/db/exec/delete.h:32,
                 from src/mongo/db/query/internal_plans.h:33,
                 from src/mongo/db/query/internal_plans.cpp:32:
src/mongo/db/exec/plan_stats.h:214:10: error: 'optional' in namespace 'std' does not name a template type
  214 |     std::optional<std::string> replanReason;
      |          ^~~~~~~~

Fixes:
 - http://autobuild.buildroot.org/results/8c0875fa413923504515a83d8b679366418c2444

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gobject-introspection: fix exec_prefix

exec_prefix has been removed since version 1.66 and
https://gitlab.gnome.org/GNOME/gobject-introspection/-/commit/a88b1ac548516ab25140a2e9dea8cac894bbac93
resulting in the following build failure with rygel because libgee
installs Gee-0.8.gir in
output/host/aarch64-buildroot-linux-gnu/sysroot/share/gir-1.0/Gee-0.8.gir
instead of
output/host/aarch64-buildroot-linux-gnu/sysroot/usr/share/gir-1.0/Gee-0.8.gir:

Could not find GIR file 'Gee-0.8.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file RygelCore-2.6.gir: Failed to parse included gir Gee-0.8
If the above error message is about missing .so libraries, then setting up GIR_EXTRA_LIBS_PATH in the .mk file should help.
Typically like this: PKG_MAKE_ENV += GIR_EXTRA_LIBS_PATH="$(@D)/.libs"

So replace exec_prefix by prefix

Fixes:
 - http://autobuild.buildroot.org/results/b04b27bbb84fa6ab9a8441e7bd94aad45226dce9

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sconeserver: fix build with gcc 11

Fix the following build failure with gcc 11:

In file included from ../sconex/sconex.h:229,
                 from ../sconex/Descriptor.h:63,
                 from Descriptor.cpp:22:
Descriptor.cpp: In member function 'void scx::Descriptor::add_stream(scx::Stream*)':
Descriptor.cpp:150:22: error: ordered comparison of pointer with integer zero ('scx::Stream*' and 'int')
  150 |   DEBUG_ASSERT(stream>=0,"add_stream() Invalid stream");
      |                ~~~~~~^~~
Descriptor.cpp: In member function 'bool scx::Descriptor::remove_stream(scx::Stream*)':
Descriptor.cpp:204:22: error: ordered comparison of pointer with integer zero ('scx::Stream*' and 'int')
  204 |   DEBUG_ASSERT(stream>=0,"remove_stream() Invalid stream");
      |                ~~~~~~^~~

Fixes:
 - http://autobuild.buildroot.org/results/ccc9562e83fd2bd312d21b3124be42dfe4b7e850

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/usbguard: needs std::future

usbguard needs std::future to avoid the following build failure raised
since the addition of the package in commit
fbff7d7289cc95db991184f890f4ca1fcf8a101e:

In file included from src/Library/IPCClientPrivate.hpp:37:0,
                 from src/Library/IPCClientPrivate.cpp:24:
/home/buildroot/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/arm-none-linux-gnueabi/include/c++/4.8.3/future:122:11: error: declaration of 'class std::promise<std::unique_ptr<google::protobuf::Message> >'
     class promise;
           ^
src/Library/IPCClientPrivate.cpp: In member function 'usbguard::IPC::MessagePointer usbguard::IPCClientPrivate::qbIPCSendRecvMessage(usbguard::IPC::MessageType&)':
src/Library/IPCClientPrivate.cpp:244:26: error: invalid use of incomplete type 'class std::promise<std::unique_ptr<google::protobuf::Message> >'
     auto future = promise.get_future();
                          ^
Fixes:
 - http://autobuild.buildroot.org/results/1c4e0dab5917e5559a97f7cf7a99e30a2b561fc9

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flatbuffers: fix locale independent on musl

Fix locale indepdendent which is enabled on musl since version 1.11.0
and
https://github.com/google/flatbuffers/commit/5f32f948102e65eaeea461b44f3b43f96c7a7a5a
resulting in the following build failure on snort3 since bump to version
3.1.6 in commit e66f2fd310374779d415fa683813cc5f5ccf6be9:

In file included from /tmp/instance-0/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/flatbuffers/flexbuffers.h:24,
                 from /tmp/instance-0/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/flatbuffers/idl.h:26,
                 from /tmp/instance-0/output-1/build/snort3-3.1.6.0/src/network_inspectors/perf_monitor/fbs_formatter.cc:29:
/tmp/instance-0/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/flatbuffers/util.h: In function 'void flatbuffers::strtoval_impl(int64_t*, const char*, char**, int)':
/tmp/instance-0/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/flatbuffers/util.h:258:12: error: 'strtoll_l' was not declared in this scope; did you mean 'strcoll_l'?
  258 |     *val = __strtoll_impl(str, endptr, base);
      |            ^~~~~~~~~~~~~~

Fixes:
 - http://autobuild.buildroot.org/results/68045b83e94f8caa337b1af7ed5f493ac1a55c47

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/osm2pgsql: needs std::future

osm2pgsql needs std::future since its addition in commit
46c42042867e672eb21b386eb5e29747c30e80ca to avoid the following build
failure:

In file included from /home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/db-copy.cpp:12:0:
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/db-copy.hpp:218:24: error: field 'barrier' has incomplete type
     std::promise<void> barrier;
                        ^
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/db-copy.hpp: In constructor 'db_cmd_sync_t::db_cmd_sync_t(std::promise<void>&&)':
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/db-copy.hpp:221:37: error: class 'db_cmd_sync_t' does not have any field named 'barrier'
     : db_cmd_t(db_cmd_t::Cmd_sync), barrier(std::move(b))
                                     ^
In file included from /home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/middle.hpp:18:0,
                 from /home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/dependency-manager.cpp:11:
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/thread-pool.hpp: In member function 'void thread_pool_t::check_for_exceptions()':
/home/buildroot/autobuild/run/instance-3/output-1/build/osm2pgsql-1.4.2/src/thread-pool.hpp:49:19: error: invalid use of incomplete type 'class std::future<void>'
             result.get();
                   ^

Fixes:
 - http://autobuild.buildroot.org/results/69528232ceba128a2e60aa778bb0943fdefc2ed1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-net-ssh2: fix gcrypt build

Pass crypto_backend option to avoid the following build failure raised
since bump to version 0.72 in commit
cd1d56bcde2a571062a1943c88506a8d9d2db357 and
https://github.com/rkitover/net-ssh2/commit/86a1274534dd7e0da03d98fb88c9c7ad4b1adb9b:

/tmp/instance-7/output-1/per-package/perl-net-ssh2/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: cannot find -lssl
/tmp/instance-7/output-1/per-package/perl-net-ssh2/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: cannot find -lcrypto

Fixes:
 - http://autobuild.buildroot.org/results/25747ec239e0b92775aa883e4f531f77d45f352e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/polkit: fix install of polkit.its

Install polkit.its in $(HOST_DIR)/share/gettext/its as suggested by
https://gitlab.gnome.org/GNOME/gvfs/-/issues/508 to avoid the following
build failure with gvfs because polkit installs polkit.its in
$(STAGING_DIR)/usr/share/gettext:

FAILED: daemon/org.gtk.vfs.file-operations.policy
/tmp/instance-3/output-1/host/bin/meson --internal msgfmthelper daemon/org.gtk.vfs.file-operations.policy.in daemon/org.gtk.vfs.file-operations.policy xml /tmp/instance-3/output-1/build/gvfs-1.44.1/po
msgfmt: cannot locate ITS rules for daemon/org.gtk.vfs.file-operations.policy.in

Fixes:
 - http://autobuild.buildroot.org/results/ba9a8b31e6e275d4db1905241a9153a0513eb335

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xenomai: fix build on arc and riscv32

Fix the following build failures on arc and riscv32:

latency.c: In function 'display':
latency.c:326:21: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'time_t' {aka 'long long int'} [-Werror=format=]
  326 |         ("RTT|  %.2ld:%.2ld:%.2ld  (%s, %Ld us period, "
      |                 ~~~~^
      |                     |
      |                     long int
      |                 %.2lld
  327 |          "priority %d)\n", dt / 3600,
      |                            ~~~~~~~~~
      |                               |
      |                               time_t {aka long long int}

altency.c: In function ‘display’:
altency.c:262:21: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘time_t’ {aka ‘long long int’} [-Werror=format=]
  262 |         ("RTT|  %.2ld:%.2ld:%.2ld  (%s, %Ld us period, "
      |                 ~~~~^
      |                     |
      |                     long int
      |                 %.2lld
  263 |          "priority %d)\n", dt / 3600,
      |                            ~~~~~~~~~
      |                               |
      |                               time_t {aka long long int}

Fixes:
 - http://autobuild.buildroot.org/results/448efe22e8fe058a1b354a3c124874e30b9ce138

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/website: update for 2021.02.4

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2021.02.4

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 004a792dcf10e6c474070c9571f7504411e786cc)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2021.05.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2021.05.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d5127a4de714d6608e897b4585e5ab5d3d5bd965)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ruby: fix RUBY_VERSION_EXT

Correct RUBY_VERSION_EXT after commit be9783951d1d44 (package/ruby: security
bump to version 3.0.1):

ls output/target/usr/lib/ruby/
3.0.0  site_ruby  vendor_ruby

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rust-bin: fix armv7-unknown-linux-gnueabi

Commit d69d40c029dc7d8199b745eaee759d92b66c5d17 forgot to add hash for
armv7-unknown-linux-gnueabi resulting in the following build failure:

ERROR: No hash found for rust-std-1.54.0-armv7-unknown-linux-gnueabi.tar.xz

Fixes:
 - http://autobuild.buildroot.org/results/443f94bb9ae0addb5130f96fb363ec9651e8af3d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Partial revert "configs/olimex_a20_olinuxino: switch to extlinux.conf"

Old scripts are still used by a10_olinuxino & a20_olinuxino_micro

Fixes olimex_a20_olinuxino_micro
see https://gitlab.com/buildroot.org/buildroot/-/jobs/1478738568

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/efl: fix build with tslib

Build with tslib is broken since bump to version 1.25.0 in commit
cf57eceabcca134197fed79c043587439b3d4e39:

/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc-buildroot-linux-uclibc/9.3.0/../../../../powerpc-buildroot-linux-uclibc/bin/ld: src/lib/ecore_fb/libecore_fb.so.1.25.1.p/ecore_fb_ts.c.o: in function `_ecore_fb_ts_fd_handler':
ecore_fb_ts.c:(.text+0x4c): undefined reference to `ts_read_raw'

Fixes:
 - http://autobuild.buildroot.org/results/fa111306b95316eed54771550474dae804fa261e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ffmpeg: add -latomic to pkg-config files

-latomic was added to extralibs to fix static build of ffmpeg in commit
fc8798197b57488a852e2c14b4677b5eb0114a0b. However, extralibs is not
added to libavformat.pc resulting in the following static build failure
of motion:

/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libavformat.a(fifo.o): in function `fifo_init':
/home/buildroot/autobuild/instance-1/output-1/build/ffmpeg-4.4/libavformat/fifo.c:519: undefined reference to `__atomic_store_8'

So add a patch to add extralibs (and so -latomic) to all pkg-config
files

Fixes:
 - http://autobuild.buildroot.org/results/62ec618e40081a250b8129ec6f5a178eb06fba1d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bullet: fix musl build

Fix the following build failure on musl raised since bump to version
3.0.9 in commit 28b4947ed8f53c4edfbf8fef9304dc76480c01ca:

In file included from /tmp/instance-5/output-1/build/bullet-3.09/src/LinearMath/btScalar.h:289,
                 from /tmp/instance-5/output-1/build/bullet-3.09/src/LinearMath/btVector3.h:19,
                 from /tmp/instance-5/output-1/build/bullet-3.09/src/LinearMath/btConvexHullComputer.h:18,
                 from /tmp/instance-5/output-1/build/bullet-3.09/Extras/VHACD/src/VHACD.cpp:28:
/tmp/instance-5/output-1/build/bullet-3.09/Extras/BulletRobotics/../../Extras/VHACD/inc/vhacdMutex.h: In constructor 'VHACD::Mutex::Mutex()':
/tmp/instance-5/output-1/build/bullet-3.09/Extras/BulletRobotics/../../Extras/VHACD/inc/vhacdMutex.h:97:54: error: 'PTHREAD_MUTEX_RECURSIVE_NP' was not declared in this scope; did you mean 'PTHREAD_MUTEX_RECURSIVE'?
   97 |   VHACD_VERIFY(pthread_mutexattr_settype(&mutexAttr, PTHREAD_MUTEX_RECURSIVE_NP) == 0);
      |                                                      ^~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes:
 - http://autobuild.buildroot.org/results/79cd2024b3dfc8d3e896cdacf67fb891df81ca6e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>