Vicente Olivert Riera [Sat, 2 Jul 2016 13:32:15 +0000 (15:32 +0200)]
package/ffmpeg: cosmetic change for the mips fpu option
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Sat, 2 Jul 2016 13:32:13 +0000 (15:32 +0200)]
package/freerdp: add support for ffmpeg 3.0
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Waldemar Brodkorb [Mon, 13 Jun 2016 06:07:17 +0000 (08:07 +0200)]
dmalloc: fix static build
For example coldfire uses FLAT binaries, which are statically
build. Fixes following autobuild failure:
http://autobuild.buildroot.net/results/
cc4233a4c3f92275a4071c172330c920c35219ca/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: use an intermediate variable rather than duplicating code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
André Hentschel [Wed, 22 Jun 2016 17:00:16 +0000 (19:00 +0200)]
fftw: Disable combined threads when building with OpenMP support
Otherwise fftw fails to configure:
configure: error: --with-combined-threads incompatible with --enable-openmp
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sat, 25 Jun 2016 07:49:13 +0000 (09:49 +0200)]
package/libdvdread: fix static compile by adding libdvdcss as dependency
If libdvdcss support was not found during configure libdvdread tries
to open libdvdcss.so nonetheless:
https://code.videolan.org/videolan/libdvdread/blob/master/src/dvd_input.c#L275
This will obviously fail in a static-only configuration. To fix the
problem add libdvdcss as hard dependency to this package.
Fixes
http://autobuild.buildroot.net/results/415/
41534b70a66c6297652f0944f9ecc7e780b26c45/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: replace += by =.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sat, 2 Jul 2016 11:07:15 +0000 (13:07 +0200)]
package/libiio: libiio network backend needs threads
When libiio network backend is enabled, NEED_THREADS is set in the
build system and require a toolchain with treads support.
Fixes:
http://autobuild.buildroot.net/results/cfc/
cfc70094d8f4008f4e660250b1b90a35a2ab384d
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maxime Hadjinlian [Fri, 1 Jul 2016 22:06:11 +0000 (00:06 +0200)]
babeld: New package
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas: use $(INSTALL) instead of install.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 2 Jul 2016 11:50:23 +0000 (08:50 -0300)]
memcached: bump to version 1.4.28
Removes the 64-bit atomic intrinsics constraint previously introduced.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 2 Jul 2016 11:46:20 +0000 (08:46 -0300)]
liboping: bump to version 1.9.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 2 Jul 2016 11:45:37 +0000 (08:45 -0300)]
configs/qemu: update aarch64 to linux 4.6.3
The console problem goes away with qemu 2.6.0 so it seems it's now a
requirement, update readme.txt accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 2 Jul 2016 11:45:36 +0000 (08:45 -0300)]
configs/pc_x86_64_{bios, efi}_defconfig: bump to linux 4.6.3
To match it's friendly qemu counterpart.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 2 Jul 2016 11:45:35 +0000 (08:45 -0300)]
configs/qemu: bump to linux 4.6.3
In order to keep them in sync with the new configs, and avoid shipping a
vulnerable kernel.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sat, 2 Jul 2016 09:00:08 +0000 (11:00 +0200)]
package/libuio: fix build with musl
limits.h header is missing in attr.c, base.c and helper.c to provide
PATH_MAX.
Fixes:
http://autobuild.buildroot.net/results/702/
7023104e6018ea46c54073ddbe5119d0f66ae5a3
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Sat, 2 Jul 2016 09:00:07 +0000 (11:00 +0200)]
package/libuio: disable Werror
Disable -Werror to avoid build issues caused by warnings.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Sat, 2 Jul 2016 09:00:06 +0000 (11:00 +0200)]
package/libuio: fix build with external intl library
When intl library is not provided by the libc, libuio forgets to link
with -lintl.
Fixes:
http://autobuild.buildroot.net/results/8f7/
8f715b4e9b826dac13f3d49da25576e6e1d79449
[Peter: simplify using LIBUIO_LIBS as suggested by Yann]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sat, 2 Jul 2016 11:18:18 +0000 (13:18 +0200)]
a20_ollinuxino: Accommodate U-Boot environment on SD-card
As described by http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout
The space betweem 544KB..1MB is reserved / used for the u-boot environment,
so mark it as such to make sure genimage doesn't put other partitions here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sat, 2 Jul 2016 11:17:07 +0000 (13:17 +0200)]
pcduino: Accommodate U-Boot environment on SD-card
As described by http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout
The space betweem 544KB..1MB is reserved / used for the u-boot environment,
so mark it as such to make sure genimage doesn't put other partitions here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sat, 2 Jul 2016 11:09:59 +0000 (13:09 +0200)]
orangepipc: Accommodate U-Boot environment on SD-card
As described by http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout
The space betweem 544KB..1MB is reserved / used for the u-boot environment,
so mark it as such to make sure genimage doesn't put other partitions here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Alexey Brodkin [Fri, 1 Jul 2016 20:01:57 +0000 (23:01 +0300)]
cubieboard2: Accommodate U-Boot environment on SD-card
According to current "include/configs/sunxi-common.h"
U-Boot environment is stored on SD-card with offset 544 kB
and its size is limited as 128 kB.
Given memory layout of sunxi boards:
1. SPL
2. U-Boot
3. U-Boot environment
4. Partitions
(see http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout for details)
we need to make sure the first real partition starts at least
with 544+128 kB offset. Adding a small safety gap let's put
the first partition with offset 1MB from the beginning of SD-card.
Otherwise current setup gets broken as soon as one saves U-Boot
environment with "saveenv" which basically overwrites FAT partition with
zImage and board no longer boots into Linux kernel.
[Peter: extend description, add padding to u-boot partition instead]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Carlos Quijano <carlos@crqgestion.es>
Cc: Andi Shyti <andi@etezian.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Andy Shevchenko [Fri, 1 Jul 2016 18:56:19 +0000 (21:56 +0300)]
package/busybox: support spaces in module aliases in mdev
The new change which enabled automatic module loading on boot does not handle
the cases when module alias includes spaces. It prevents modules to be loaded
since script fails:
% find /sys/ -name modalias | xargs sort -u
sort: /sys/devices/platform/Fixed: No such file or directory
First alias in question is "platform:Fixed MDIO bus".
Amend the script to support above like cases.
Fixes: 07f46c2b6dae ("package/busybox: support automatic module loading with mdev")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Hadjinlian [Fri, 1 Jul 2016 21:51:28 +0000 (23:51 +0200)]
package/systemd: Force enable blkid
Since systemd select BR2_PACKAGE_UTIL_LINUX_LIBBLKID, we can safely
force this option.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Hadjinlian [Fri, 1 Jul 2016 21:51:27 +0000 (23:51 +0200)]
package/systemd: Add optional libxkbcommon support
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Hadjinlian [Fri, 1 Jul 2016 21:51:24 +0000 (23:51 +0200)]
package/systemd: add optional support for qrencode
The support of qrencode depends of the journal gateway feature as it is
used to display the key used to seal the journal.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Hadjinlian [Fri, 1 Jul 2016 21:51:23 +0000 (23:51 +0200)]
package/systemd: add optional support for libidn
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Hadjinlian [Fri, 1 Jul 2016 21:51:22 +0000 (23:51 +0200)]
package/systemd: Disable IMA support
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Hadjinlian [Fri, 1 Jul 2016 21:51:21 +0000 (23:51 +0200)]
package/systemd: Disable the test coverage
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Hadjinlian [Fri, 1 Jul 2016 21:51:20 +0000 (23:51 +0200)]
package/systemd: add optional support for audit
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:18 +0000 (23:51 +0200)]
package/systemd: remove unnecessary make opts
These flags were originally needed to support uClibc in earlier releases.
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:17 +0000 (23:51 +0200)]
package/systemd: only create 'systemd-journal' group
systemd-journal is a group used for controlling user access to the
journal when used with tools like journalctl.
While we're at it, sort the users list to improve readability.
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:16 +0000 (23:51 +0200)]
package/systemd: use 'menuconfig'
systemd has a bunch of options now, so use 'menuconfig' to the group the
options in a submenu.
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:15 +0000 (23:51 +0200)]
package/systemd: add optional support for hibernation
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:14 +0000 (23:51 +0200)]
package/systemd: add optional support for polkit
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:13 +0000 (23:51 +0200)]
package/systemd: add optional support for coredump
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:12 +0000 (23:51 +0200)]
package/systemd: add optional support for localed
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:11 +0000 (23:51 +0200)]
package/systemd: add optional support for timedated
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
[Maxime: Add default y]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:10 +0000 (23:51 +0200)]
package/systemd: add optional support for hostnamed
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
[Maxime: add default y]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:09 +0000 (23:51 +0200)]
package/systemd: add optional support for importd
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:08 +0000 (23:51 +0200)]
package/systemd: add optional support for machined
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:07 +0000 (23:51 +0200)]
package/systemd: add optional support for logind
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:06 +0000 (23:51 +0200)]
package/systemd: add optional support for rfkill
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:05 +0000 (23:51 +0200)]
package/systemd: add optional support for backlight
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:04 +0000 (23:51 +0200)]
package/systemd: add optional support for random-seed
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:03 +0000 (23:51 +0200)]
package/systemd: add optional support for firstboot
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
[Maxime: Add default y]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:02 +0000 (23:51 +0200)]
package/systemd: add optional support for sysusers
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gabe Evans [Fri, 1 Jul 2016 21:51:01 +0000 (23:51 +0200)]
package/systemd: add optional support for tmpfiles
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
[Maxime: Add default y]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jerzy Grzegorek [Sat, 2 Jul 2016 05:06:27 +0000 (07:06 +0200)]
package/valijson: indentation cleanup
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jerzy Grzegorek [Sat, 2 Jul 2016 05:06:26 +0000 (07:06 +0200)]
package/libcoap: indentation cleanup
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Julien Floret [Sat, 2 Jul 2016 09:35:38 +0000 (11:35 +0200)]
jsmin: add menuconfig entry for host variant
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gilles Chanteperdrix [Tue, 14 Jun 2016 15:31:10 +0000 (17:31 +0200)]
reproducibility: override locale and timezone
And export BR2_REPRODUCIBLE for post-build / post-image scripts.
[Peter: Extend commit message,
move export together with our other exports,
add comment explaining why we override local/timezone]
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gilles Chanteperdrix [Tue, 14 Jun 2016 15:31:09 +0000 (17:31 +0200)]
reproducibility: introduce config knob
Making the builds reproducible involves turning off build timestamps,
which some users may find annoying. So make the reproducible builds
optional.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 2 Jul 2016 09:28:10 +0000 (11:28 +0200)]
audit: bump to version 2.6.2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 2 Jul 2016 07:47:15 +0000 (09:47 +0200)]
package/{libsepol,libselinux}: fix build on ancient distros
Ancient distros (especially enterprise-grade still in use) do not accept
ln --relative.
Revert the upstream commit, since the problem it was trying to fix is
not applicable in the context of Buildroot (even with a merged /usr).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Adam Duskett <Aduskett@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 2 Jul 2016 08:37:01 +0000 (10:37 +0200)]
audit: add patch to fix EHWPOISON build issue
Fixes:
http://autobuild.buildroot.net/results/
2e147b60481cfb8960749a8e012ff8fa05568a2c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Fri, 1 Jul 2016 22:24:55 +0000 (00:24 +0200)]
libsepol: add missing dependency on host-flex
Fixes:
http://autobuild.buildroot.net/results/
580037bd376188e18a4a58927c929d21e9b2b03c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Wed, 22 Jun 2016 13:49:04 +0000 (15:49 +0200)]
python-scapy3k: new package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Charles Hardin [Sat, 21 May 2016 20:08:34 +0000 (13:08 -0700)]
package/cmake: with BR2_ENABLE_DEBUG use RelWithDebInfo
>From the documentation on BR2_ENABLE_DEBUG, the intention is to get
a build with debug symbols and not a "debug build" since that can have
the unintended consequence of being a different code path then a
release build type definition.
Switch the "Debug" to "RelWithDebInfo" in the cmake package support
to accomodate getting the debug symbols and still be a release
build.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Fri, 1 Jul 2016 16:29:09 +0000 (18:29 +0200)]
package/Makefile.in: set variables for legacy f77 checks
For fortran detection, some projects check for fortran availability
using the FC/FCFLAGS variables, and others for the legacy F77/FFLAGS
ones.
So, make sure the legacy fortran F77 and FFLAGS variables are set in
TARGET_CONFIGURE_OPTS.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Benjamin Kamath [Fri, 1 Jul 2016 16:29:08 +0000 (18:29 +0200)]
package/Makefile.in: set TARGET_FCFLAGS variables
TARGET_FCFLAGS is already added to TARGET_CONFIGURE_OPTS, but was not
defined so far. This change fixes this.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Benjamin Kamath <bkamath@spaceflight.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Fri, 1 Jul 2016 16:29:07 +0000 (18:29 +0200)]
package/gcc: wrap gfortran
gfortran supports all options supported by gcc, so it can and should be called
via the toolchain wrapper.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Andy Shevchenko [Fri, 1 Jul 2016 18:57:30 +0000 (21:57 +0300)]
package/busybox: enable ttyUSB[0-9] when using mdev
Some of our systems are using ttyUSB0 devices as a serial console.
Add them to mdev.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Joris Lijssens [Fri, 1 Jul 2016 16:32:22 +0000 (18:32 +0200)]
package/libuio: new package
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
[Romain:
- fix autoreconf issue by using GETTEXTIZE and AUTORECONF
- fix issue with missing makeinfo
- move version number comment in .mk]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Thomas: add GPLv2 license, used for the programs.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Fri, 1 Jul 2016 16:03:33 +0000 (18:03 +0200)]
package/linux-headers: do not default to any version for custom headers
Currently, for a custom headers version, or for the same headers as the
kernel, wedefault to a "very old" version (i.e. 2.6.x in practice).
However, as Vivien explained, when using the same headers as the kernel,
and the kernel is set to use the default version (aka latest version
known to Buildroot) of the kernel, one would expect the headers are
automatically tracking the latest version. Off course, that expectation
is broken because of the above.
However, whatever version we default to, it will probably not be
correct, whether we default to the latest version or to the "very old"
version.
So, simply drop the specific default version, so the default is now the
latest version.
Note: that has the potential to break existing defconfig files that
relied on the "very old" version to be the default. Well, whatever,
they'll get a build failre quite early, and it is easy to fix.
Reported-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Wed, 29 Jun 2016 06:27:05 +0000 (08:27 +0200)]
python-xlutils: new package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Wed, 29 Jun 2016 06:27:04 +0000 (08:27 +0200)]
python-xlwt: new package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Mon, 27 Jun 2016 15:11:15 +0000 (16:11 +0100)]
package/gcc: use BR2_USE_WCHAR to set gcc libquadmath option
BR2_TOOLCHAIN_BUILDROOT_WCHAR is only defined when uclibc is selected,
whereas BR2_USE_WCHAR is always defined. Due to this, we were disabling
quadmath support even with glibc or musl.
So, use BR2_USE_WCHAR to drive the gcc libquadmath option.
In addition, invert the logic of the condition to use positive logic,
and rework the comment to no longer mention gcc 4.6: libquadmath still
exists, and it still requires wchar support.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Fri, 1 Jul 2016 15:14:39 +0000 (17:14 +0200)]
package/linux-headers: improve help text and prompt
The way the help text and prompt for the kernel header version choice is
written can be misleading to some users.
Rewite them so it is more explicit.
Reported-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jaap Crezee [Sat, 25 Jun 2016 11:20:03 +0000 (13:20 +0200)]
lzop: fix build of host variant with gcc6
Signed-off-by: Jaap Crezee <jaap@jcz.nl>
[Thomas: minor tweaks in commit log and patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Erico Nunes [Sun, 26 Jun 2016 21:36:27 +0000 (23:36 +0200)]
efivar: depends on target gcc >= 4.7
The efivar internal build system uses flags such as -std=gnu11 ,
-Wmaybe-uninitialized , -flto which are available in gcc >= 4.7 only.
These flags are passed both to target build and to build a host tool.
For the host part, this has been worked around by overriding
'gcc_flags', but doing that for the target would remove all flags that
upstream intended for the target build.
Buildroot doesn't support building gcc 4.6 in its own toolchain anymore
but it's possible to use an external toolchain with gcc 4.6 which would
be unable to build this package.
This patch adds a limitation on toolchains with target gcc >= 4.7 to
make sure that the flags are available in the chosen toolchain.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 27 Jun 2016 08:44:50 +0000 (09:44 +0100)]
openblas: new package
OpenBLAS is optimised for specific CPU models, which don't fully match
with the GCC code generation options. Therefore, we can't automatically
select BR2_PACKAGE_OPENBLAS_TARGET based on the CPU choice. Instead, let
the user select the TARGET name, but offer a sensible default. Other
possible solutions were deemed too complicated: adding choice options in
the ambiguous cases, or only making the option user-visible when there
is ambiguity.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Erico Nunes [Tue, 28 Jun 2016 19:25:20 +0000 (21:25 +0200)]
efivar: force shared libgcc for Nios II
efivar for Nios II also has to be linked with shared libgcc to avoid an
error due to FDE encoding in static libgcc when linking libefiboot.so.
Fixes:
http://autobuild.buildroot.net/results/0c9/
0c90e3e7ad41d21dd832f6f266af35fc19185170/
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Martin Bark [Thu, 16 Jun 2016 16:05:54 +0000 (17:05 +0100)]
package/upx: fix build with host gcc 6.x
Disable the -Werror gcc option because is causes the following error
when using gcc 6.x on the host.
p_vmlinx.cpp:100:5: error: this ‘if’ clause does not guard...
[-Werror=misleading-indentation] if (a->p_paddr > b->p_paddr) return 1;
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Martin Bark [Thu, 16 Jun 2016 16:00:49 +0000 (17:00 +0100)]
package/ucl: fix build with host gcc 6.x
ucl fails with the following error when using gcc 6.x on the host:
checking whether your compiler passes the ACC conformance test... FAILED
configure:
configure: Your compiler failed the ACC conformance test - for details see
configure: `config.log'. Please check that log file and consider sending
configure: a patch or bug-report to <markus@oberhumer.com>.
configure: Thanks for your support.
configure:
configure: error: ACC conformance test failed. Stop.
Fix the issue by using the ISO C90 standard.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Thu, 30 Jun 2016 07:55:04 +0000 (09:55 +0200)]
python-tomako: new package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Wed, 29 Jun 2016 08:01:24 +0000 (10:01 +0200)]
python-tornado: fix runtime dependencies
According to setup.py tornado requires backports.ssl_match_hostname
for Python < 3.2 and certifi for Python < 3.4.
Actually both requirements are optional and tornado alone can work
without them, but Python packages like python-circus check requirements
at runtime and though they don't use this funtionality, they insist on
having these packages installed.
An upstream patch fixes backports.ssl_match_hostname dependency and
selecting python-certifi for Python 2 fixes certifi dependency till
this is fixed upstream.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Fri, 1 Jul 2016 10:06:19 +0000 (12:06 +0200)]
python-socketio: new package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Fri, 1 Jul 2016 10:06:18 +0000 (12:06 +0200)]
python-engineio: new package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Fri, 1 Jul 2016 09:27:25 +0000 (10:27 +0100)]
configs/qemu_mips64r6el_malta_defconfig: new configuration
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Fri, 1 Jul 2016 09:27:24 +0000 (10:27 +0100)]
configs/qemu_mips64r6_malta_defconfig: new configuration
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Fri, 1 Jul 2016 09:27:23 +0000 (10:27 +0100)]
configs/qemu_mips32r6el_malta_defconfig: new configuration
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Fri, 1 Jul 2016 09:27:22 +0000 (10:27 +0100)]
configs/qemu_mips32r6_malta_defconfig: new configuration
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Fri, 1 Jul 2016 09:27:21 +0000 (10:27 +0100)]
configs/qemu_mipsel_malta_defconfig: rename to qemu_mips32r2el_malta_defconfig
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Fri, 1 Jul 2016 09:27:20 +0000 (10:27 +0100)]
configs/qemu_mips_malta_defconfig: rename to qemu_mips32r2_malta_defconfig
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
universe II [Thu, 25 Feb 2016 21:24:44 +0000 (22:24 +0100)]
netsnmp: add OK/FAIL output in init script
This commit reworks the output of the start(), stop() and reload()
functions. The return values of start-stop-daemon are now checked and a
OK or FAIL message is printed out.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
universe II [Thu, 25 Feb 2016 21:24:43 +0000 (22:24 +0100)]
netsnmp: add missing reload of snmptrapd in init script
In case of a reload command the snmpdtrapd wasn't restarted.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
universe II [Thu, 25 Feb 2016 21:24:42 +0000 (22:24 +0100)]
netsnmp: remove 'set -e' from init script
This patch removes 'set -e' from the netsnmp init script since it causes
the init script to terminate if an error occurs. This prevents the
script to create an "FAIL" printout in case of an error.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
universe II [Thu, 25 Feb 2016 21:24:41 +0000 (22:24 +0100)]
netsnmp: adjust init script by creating start(), stop(), reload()
Change the init script to get rid of double code. Start, stop and reload
code has been put into separate functions and 'restart' will just call
stop() and start() with a delay in between.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ricardo Martincoski [Mon, 20 Jun 2016 04:46:11 +0000 (01:46 -0300)]
tmux: bump to version 2.2
- remove patch already upstream 0001-remove-use-of-sys-cdefs.h.patch
https://github.com/tmux/tmux/commit/
7b085136a7291cbcdfcc53182fbd13aaca70306e
- add new dependency on BR2_USE_WCHAR (version 2.2 uses mbtowc())
- add new dependency on locale support
- add note to help text about the need of a working UTF-8 locale
- also rewrap help text to 72 characters
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Sun, 26 Jun 2016 22:39:13 +0000 (18:39 -0400)]
setools: fix build with latest selinux libraries
Setools 3.3.8 won't cleanly compile against newer versions
of the new selinux libraries. This patch fixes these errors.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Sun, 26 Jun 2016 22:39:12 +0000 (18:39 -0400)]
libsepol: bump to version 2.5
An additional patch is needed to fix the build with uClibc.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas: add patch to fix build with uClibc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Sun, 26 Jun 2016 22:39:10 +0000 (18:39 -0400)]
checkpolicy: bump to version 2.5
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Sun, 26 Jun 2016 22:39:09 +0000 (18:39 -0400)]
libsemanage: bump to version 2.5
The 0001-execption-lib-path-fix.patch is also no longer needed, as the
new version of libsemanage includes the fix provided by the patch.
As such, the patch was removed, and 0002 was renamed to 0001.
Audit was added as a dependency as the new version of libsemanage
will fail to compile searching for audit.h
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add the select on audit + propagate the dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Sun, 26 Jun 2016 22:39:11 +0000 (18:39 -0400)]
libselinux: bump to version 2.5
In addition, if a user is using glibc 2.22, the default CFLAG
D_FILE_OFFSET_BITS=64 will cause a compile error. This flag is now
removed from the CFLAGS in the make file to ensure that toolchains
compiled against glibc 2.22 will build the new version of the package
properly.
In addition, libselinux now uses fts(), which is not available on musl,
and not provided by our default uClibc configuration. Therefore,
libselinux now depends on glibc, as well as all its reverse
dependencies.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add glibc dependency for fts().]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Sun, 26 Jun 2016 22:39:08 +0000 (18:39 -0400)]
audit: bump to version 2.6
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Frank Hunleth [Tue, 21 Jun 2016 16:46:53 +0000 (12:46 -0400)]
erlang: enable compilation on mipsel
Erlang works fine on mipsel platforms so add it to the supported list.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Zoltan Gyarmati [Wed, 29 Jun 2016 12:33:40 +0000 (14:33 +0200)]
package/grantlee: upgrade to 5.1.0, remove obsolete Qt4 build option
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 27 Jun 2016 08:51:17 +0000 (09:51 +0100)]
go: disable for MIPS R6
MIPS R6 support in Go has not yet been developed.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jerzy Grzegorek [Thu, 30 Jun 2016 06:37:40 +0000 (08:37 +0200)]
package/domoticz: indentation cleanup
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Thu, 30 Jun 2016 07:25:04 +0000 (09:25 +0200)]
scanpypi: rework runtime dependency handling
In most cases Python's package dependencies found in setup.py are
runtime dependencies and hence don't need to be mentioned in *.mk
file.
Also add '# runtime' tag to select statements in Config.in.
__create_mk_requirements() itself is left for future uses (cffi backend
handling etc.).
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Thu, 30 Jun 2016 13:42:57 +0000 (15:42 +0200)]
python-psutil: bump to version 4.3.0
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Thu, 30 Jun 2016 13:42:56 +0000 (15:42 +0200)]
python-pysocks: bump to version 1.5.7
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
projects / buildroot.git / log