package/hostapd: add upstream 2020-1 security patches

Fixes the following security vulnerabilities:

CVE-2020-12695: The Open Connectivity Foundation UPnP specification before
2020-04-17 does not forbid the acceptance of a subscription request with a
delivery URL on a different network segment than the fully qualified
event-subscription URL, aka the CallStranger issue.

For details, see the advisory:
https://w1.fi/security/2020-1/upnp-subscribe-misbehavior-wps-ap.txt

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ibm-sw-tpm2: re-fix build with uClibc-ng and older glibcs

In commit 26e37cef1627faa1f5ab8935482e2b2bc3465c33, we started using
__WORDSIZE to get the size of longs on the given architecture, in
order to support all CPU architectures.

Unfortunately, __WORDSIZE is not enabled in musl, so in
19bd08900448aa45b506320ad2ab912f789e6e5e, we switched to using
LONG_BIT instead of __WORDSIZE.

However, LONG_BIT is not readily available on glibc, you need
_XOPEN_SOURCE to be defined, which was done in
a34e7f88f67b77066f73894dc8e42bca3c076fa6.

However, in a34e7f88f67b77066f73894dc8e42bca3c076fa6, _XOPEN_SOURCE
was just defined, with no specific value. This caused the build to
break again on uClibc-ng and older glibcs, because clock_gettime() and
CLOCK_MONOTONIC were no longer defined. In both uClibc-ng and glibc,
CLOCK_MONOTONIC is only defined if __USE_POSIX199309 is defined. It
turns out that simply defining _XOPEN_SOURCE with no value does not
lead to __USE_POSIX199309 being defined in uClibc-ng and old glibcs,
while it is defined in newer glibcs.

The difference comes from the following snippet of code, which is
present in recent enough glibc's <feature.h> but not uClibc-ng's or
older glibc's <feature.h>:

/* If none of the ANSI/POSIX macros are defined, or if _DEFAULT_SOURCE
   is defined, use POSIX.1-2008 (or another version depending on
   _XOPEN_SOURCE).  */

So the fact that we are defining _DEFAULT_SOURCE makes it assume that
we're using POSIX 2008.09, which obviously includes POSIX 1993.09.

Due to the lack of this code snippet, uClibc-ng <features.h> only
enables:

     !defined _POSIX_SOURCE && !defined _POSIX_C_SOURCE)

but not:

So we need an _XOPEN_SOURCE level of at least 500 for POSIX 1993.09
definitions to be available.

This is confirmed by the feature_test_macros man page, which states:

                  _XOPEN_SOURCE < 500
                         _POSIX_C_SOURCE is defined with the value 2.

                  500 <= _XOPEN_SOURCE < 600
                         _POSIX_C_SOURCE is defined with the value 199506L.

When this is fixed, another issue arises with older glibc toolchains
(such as Sourcery ARM), where fd_set is no longer defined. Inded, with
POSIX-1.2001 being enabled, we need to include <sys/select.h> to
access the fd_set definition and friends (see man fd_set for details).

This commit was tested with two glibc toolchains (recent and old), one
uClibc-ng toolchain and one musl toolchain.

Fixes:

  http://autobuild.buildroot.net/results/e20f9474fc0217036faa6561df33fa983466ddfe/
  (uClibc-ng)

  http://autobuild.buildroot.net/results/b5d944389fc96ef2c5e0608fe4ac34149e5f9739/
  (glibc)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/netopeer2: add patch to solve issue with empty group name

When building on a host that has no name specified for the used group in
/etc/group the script in install step will fail due to missing group name.

CMake Error at CMakeLists.txt:80 (message):
  Learning server module group failed: id: cannot find name for group ID 8000

The patch was taken from upstream and modified manually because of merge
conflicts.

Fixes:
http://autobuild.buildroot.net/results/f197ca1def9dc1292e1e784757f2da9d95484431/

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ipmitool: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/b6231d601d6051c97d3c2a0ed3065df03648c40d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

legacy: drop options that are now forcibly enabled

As Thomas said:

> In this sort of situation, we generally don't add any legacy
> handling.  Indeed, since the feature is now mandatory... the
> default behavior will always be OK.

> People who could be annoyed are people who had this feature
> disabled... which is now always enabled. But the legacy handling
> will anyway not help those people.

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

docs/website/news.html: correct left/right ordering of 2020.08-rc2 entry

And drop the confusing class="timeline" tag from the 2020.08-rc1 entry.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.08-rc2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openfpgaloader: drop ftdipp

ftdipp is not needed since version 0.1 and
https://github.com/trabucayre/openFPGALoader/commit/3df577b70638c37885eef3a27b8931261b259e47

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openfpgaloader: drop udev from comment

Commit 5714f3f81fdd85640d627f9b43490c52419650ea forgot to remove udev
from comment

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.{4, 7}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ripgrep: fix debug build

There is no --debug mode for cargo resulting in the following build
failure since the addition of this package with commit
4b0d1ef6ac00c5170a3fb9d15d06b3d3172e0c97:

error: Unknown flag: '--debug'

Fixes:
 - http://autobuild.buildroot.org/results/58e74bb056ec65680ecebaa559aa14bdebbf5c85
 - http://autobuild.buildroot.org/results/28c6364a89a6044d5a036614f7a6e59815efb770

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: keep the default 'dev' mode when in debug]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openfpgaloader: bump to current master

- argp is no more used;
- UDEV dependency is now optional

Fix:
- http://autobuild.buildroot.org/results/f3f3cc216ae42bb8a8925b0df7c1a3cc79b027d7

/home/buildroot/autobuild/instance-1/output-1/build/openfpgaloader-849e5751e06d4d00f323205d5f02ee01f9f59a61/src/spiFlash.cpp:
In member function 'void SPIFlash::jtag_write_read(uint8_t, uint8_t*, uint8_t*, uint16_t)':
/home/buildroot/autobuild/instance-1/output-1/build/openfpgaloader-849e5751e06d4d00f323205d5f02ee01f9f59a61/src/spiFlash.cpp:92:43:
error: variable-sized object 'jtx' may not be initialized
  uint8_t jtx[xfer_len] = {reverseByte(cmd)};
                           ^
and

src/gowin.cpp:73:11: error: 'runtime_error' is not a member of 'std'
 throw std::runtime_error("both write-flash and write-sram can't be set");
       ^
src/gowin.cpp:81:10: error: 'runtime_error' is not a member of 'std'
  throw std::runtime_error("incompatible file format");

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[yann.morin.1998@free.fr:
  - don't add a sub-option for udev; directly rely on udev being avail
  - fix conflict after 1ca0077d9141
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

docs/manual/adding-packages-cargo.txt: drop debug profile

There is no debug profile on cargo. The available profiles are: dev
(enabled by default), release, test and bench.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/xen: add upstream security fix for XSA-327

Fixes the following security issue:

CVE-2020-15564: Missing alignment check in VCPUOP_register_vcpu_info

For further details, see the advisory:

https://xenbits.xenproject.org/xsa/advisory-327.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/tests: add runtime test for python-rpi-gpio

Modeled after similar python packages.

However, this one is picky, and throws an exception when it
detects that it is not running on a Raspberry Pi. So we just
catch that exception and check this is what we expect.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Christian Stewart <christian@paral.in>
Cc: Michael Fischer <mf@go-sys.de>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Ian Haylock <haylocki@yahoo.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-rpi-gpio: fix gcc-10 compatibility patch

Although the patch makes the package build OK, it fails at runtime
when the module is imported, because of missing symbols:

    ImportError: /usr/lib/python3.8/site-packages/RPi/_GPIO.cpython-38-aarch64-linux-gnu.so: undefined symbol: high

Fix that by making sure the symbols are declared once, but only once.

Fixes: #13166
Reported-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Michael Fischer <mf@go-sys.de>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Ian Haylock <haylocki@yahoo.co.uk>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5: needs host gcc >= 5.0 for full C++11

Building qmake requires full C++11, which boils down to gcc >= 5.0,
which is what upstream advertises as a requirement anyway:

    https://doc.qt.io/qt-5.15/supported-platforms.html

    Distribution   | Architecture     | Compiler
    Generic Linux  | x86 and x86_64   | GCC (5 or later), ICC 18.x

Fixes:
    http://autobuild.buildroot.org/results/c3e/c3ee971a72f268e72b69a647e8fd00a8cee7dc91/
    http://autobuild.buildroot.org/results/89c/89c9a88b4e1195e952528574263201d4fbc27570/
    [...]

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tpm2-abrmd: bump to version 2.3.3

Bugfix release with a single fix:

Fixed:
  - Fixed handle resource leak exhausting TPM resources.

https://github.com/tpm2-software/tpm2-abrmd/releases/tag/2.3.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libcurl: security bump to 7.72.0

This new version fixes, amongst many other things, CVE-2020-8231
(https://curl.haxx.se/docs/CVE-2020-8231.html). See the full changelog
on https://curl.haxx.se/changes.html#7_72_0 .

Also drop the 4 patches, that have all been released upstream.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openfpgaloader: C++ dependency is not inherited

openfpgaloader is written in C++, so the dependency on C++ is not
inherited from libftdipp1.

Drop the confusing comment.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/php: drop BR2_PACKAGE_PHP_EXT_HASH

hash extension can't be disabled since version 7.4.0 and
https://github.com/php/php-src/commit/bf344425812b0f6156d0a8a54ed7bc38054f7636

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/php: drop --with-libxml-dir

--with-libxml-dir has been dropped since version 7.4.0 and
https://github.com/php/php-src/commit/29d1b7fd521af288e9f04d784f59a2d15b494a30

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/php: ffi needs dynamic library

FFI support in php has been added with commit
e16f05c0f00081d446ebee56d9f3ad3cf41da1ae, it depends on dynamic library
otherwise the build will fail on:

/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/5.5.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: ext/ffi/ffi.o: in function `zim_FFI_cdef':
ffi.c:(.text+0xe78): undefined reference to `DL_LOAD'

Fixes:
 - http://autobuild.buildroot.org/results/3380b7b6777d1c5fcb53c855b003466fa3bf2079

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/bind: security bump to version 9.11.22

Fixes the following security issues:

CVE-2020-8622: A truncated TSIG response can lead to an assertion failure
https://kb.isc.org/docs/cve-2020-8622

CVE-2020-8623: A flaw in native PKCS#11 code can lead to a remotely
triggerable assertion failure in pk11.c
https://kb.isc.org/docs/cve-2020-8623

CVE-2020-8624: update-policy rules of type "subdomain" are enforced incorrectly
https://kb.isc.org/docs/cve-2020-8624

For more details, see the release notes:
https://downloads.isc.org/isc/bind9/9.11.22/RELEASE-NOTES-bind-9.11.22.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/chrony: security bump to version 3.5.1

Fixes the following security issues:

CVE-2020-14367: Insecure writing of pidfile
-------------------------------------------

When chronyd is configured to save the pidfile in a directory where the
chrony user has write permissions (e.g. /var/run/chrony - the default
since chrony-3.4), an attacker that compromised the chrony user account
could create a symbolic link at the location of the pidfile to make
chronyd starting with root privileges follow the symlink and write its
process ID to a file for which the chrony user doesn't have write
permissions, causing a denial of service, or data loss.

This issue was reported by Matthias Gerstner of SUSE.

For further details, see the oss-security posting:
https://www.openwall.com/lists/oss-security/2020/08/21/1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/qt5/qt5imageformats: fix build with jasper

Fixes:
 - http://autobuild.buildroot.org/results/ea3bc0d3110cb54421ecf433317ca79ca0ff834a
 - http://autobuild.buildroot.org/results/6831dfdd1ecaaa3812de481882040c1742a72aec

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

docs/manual: fix typo

depednencies -> dependencies

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/owfs: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/7e9c33d7a1613826f85716403a00dce03dd8daf2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mjpg-streamer: disable opencv python and cpp example

python-numpy is an optional dependency since
https://github.com/jacksonliam/mjpg-streamer/commit/545c1a1d3abf72bb7a97c870c78e85dd0845f63a

This dependency will raise the following build failure if python-numpy
is found on the host:

aarch64_be-linux-gnu-g++: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/lib/python3/dist-packages/numpy/core/include'

because mjpg-streamer uses the python executable to retrieve the include
directory:

-- Found PythonLibs: /home/peko/autobuild/instance-0/output-1/host/aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libpython3.8.so (found version "3.8.5")
-- Found PythonInterp: /usr/bin/python3.5 (found version "3.5.3")
-- Found NUMPY: /usr/lib/python3/dist-packages/numpy/core/include

So disable python filter as well as cpp example while at it

Fixes:
 - http://autobuild.buildroot.org/results/e6795fa8ed5d8514b3e10ea1135afb31eab22b7e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libubox: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/aef10cc43f6c34f106624588ae2a1131520ee066

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ncftp: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/78822bc0e0039e8f8949011a256cac022863276f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gstreamer1/gst1-plugins-bad: fix deactivation of opencv

Build can fail if opencv3 is built before gst1-plugins-bad because
-Dopencv=disabled does not work in meson (i.e. since commit
5d6c408e9535be4b5ba0c8a49215d2d03dcb5cd5)

Fixes:
 - http://autobuild.buildroot.org/results/19605057c4956d97e9e65068680485db637282db

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/collectd: fix build with luajit

Build with luajit has been enabled with commit
911a9bf5739d94545cc482c765f876a9ff73e304 however the build fails because
collectd does not find liblua

Fixes:
 - http://autobuild.buildroot.org/results/31302b47fb70eb442cd000f4b9f27a9e12432cc3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/igd2-for-linux: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/f296984c3851fc28341210e36ef1b55b2edac209

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dovecot-pigeonhole: bump version to 0.5.11

Release notes:
https://dovecot.org/pipermail/dovecot-news/2020-August/000439.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/efl: fix build without NLS

nls is enabled by default in meson_options.txt (which is available since
version 1.22.0). NLS was explicitly disabled for host-efl in commit
6deaa3d50de166ce187e8b15c70394a8eb844c03 but nothing was done for the
target resulting in the following build failure:

../src/lib/elementary/elm_priv.h:189:25: warning: implicit declaration of function '_elm_dgettext'; did you mean 'dgettext'? [-Wimplicit-function-declaration]
 #  define E_(string)    _elm_dgettext(string)
                         ^~~~~~~~~~~~~

/nvme/rc-buildroot-test/scripts/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/8.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: src/lib/elementary/libelementary.so.1.24.3.p/elc_hoversel.c.o: in function `_access_state_cb':
elc_hoversel.c:(.text+0x1210): undefined reference to `_elm_dgettext'

So enable nls dependening on BR2_SYSTEM_ENABLE_NLS and add
TARGET_NLS_DEPENDENCIES to EFL_DEPENDENCIES

Fixes:
 - http://autobuild.buildroot.org/results/5985b39b87c5c392b4f9b65c12008ec7b3a143fe

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gstreamer1/gstreamer1-editing-services: disable introspection

Disable introspection as it raises a build failure with autotools.
It could be enabled after bumping to upcoming 1.18.x and switching to
messon. We can't switch now as version 1.16.2 don't allow to disable
examples/tools through meson

Fixes:
 - http://autobuild.buildroot.org/results/36eb875fba2847b32df05f31d8f8ca9f0ecde36f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/c-periphery: fix build with kernel 4.6 and 4.7

Fixes:
 - http://autobuild.buildroot.org/results/c3b868c12baac9438b792ada105c0b0de0106311

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/elixir: fix host-erlang dependency

There is no target elixir package, so setting a value to
ELIXIR_DEPENDENCIES has no effect, HOST_ELIXIR_DEPENDENCIES must be
used instead.

Fixes:

  http://autobuild.buildroot.net/results/a3a37eb724ca5689f8e83c9b2af04d07afa80315/

Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dieharder: fix build with gcc 10

Disable -fno-common with dieharder, there is more than 100 variables to
fix and upstream seems dead.

Fixes:
 - http://autobuild.buildroot.org/results/ba70d111cd1f2029a193a88af3b44daf6ef27786

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/dump1090: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/88dc97fcaa649014edb3b54a5dd4bd8ec4715bbd

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gdbm: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/39c405096908e1d15f2462b990717215bea0750f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/testing: add openssh runtime test

This new runtime test is based on test_dropbear.py. The only required change
is to use "-oStrictHostKeyChecking=no" instead of "-y" to accept the new key.

Since the base test infra only provide a uClibc-ng toolchain, add a second
test using a glibc based internal toolchain.

For example, this allow to trigger the openssh 8.1p bug with glibc 2.31 [1].

[1] https://bugs.archlinux.org/task/65386

Signed-off-by: Romain Naour <romain.naour@smile.fr>
yann.morin.1998@free.fr:
  - deduplicate the whole test
  - don't provide any NIC, we only need and use lo
  - simplify post-build script (append with cat, don't munge with sed)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mpd: add libid3tag optional dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd: add zziplib optional dependency

zziplib is an optional dependency since version 0.15.0 and
https://github.com/MusicPlayerDaemon/MPD/commit/e216e01ab3db0d9bea179b043276401d38bfd957

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd: add libmodplug optional dependency

libmodplug is an optional dependency since version 0.15.0 and
https://github.com/MusicPlayerDaemon/MPD/commit/d838a1ad24a9eaac44367e34506373b4b71e4ff0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd: add libsidplay2 optional dependency

libsidplay2 is an optional dependency since version 0.15.0 and
https://github.com/MusicPlayerDaemon/MPD/commit/1136f6fb7a2a6a0a5bfba0dcf99410d1bbf04252

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/collectd: fix build with dpdk_telemetry

Fix typo added by 44e0b6014f7e67901af346af8f6a9452b095ddd5

Fixes:
 - http://autobuild.buildroot.org/results/770293a007d683cb6f82f1fd3bcc20967e2b4bed

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dovecot: security bump version to 2.3.11.3

Release notes:
https://dovecot.org/pipermail/dovecot-news/2020-August/000440.html

Fixes the following CVEs:

* CVE-2020-12100: Parsing mails with a large number of MIME parts could
  have resulted in excessive CPU usage or a crash due to running out of
  stack memory.
* CVE-2020-12673: Dovecot's NTLM implementation does not correctly check
  message buffer size, which leads to reading past allocation which can
  lead to crash.
* CVE-2020-10967: lmtp/submission: Issuing the RCPT command with an
  address that has the empty quoted string as local-part causes the lmtp
  service to crash.
* CVE-2020-12674: Dovecot's RPA mechanism implementation accepts
  zero-length message, which leads to assert-crash later on.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/opencv3: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/e87b566f9c7d4ebebe57313fca4751939c197c88

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/iprutils: fix build with ancient toolchains

alphasort and uint used to be guarded behind various test-macros
definitions, which are not default on ancient toolchains (glibc-2.18
era for example).

Fixes:
 - http://autobuild.buildroot.org/results/41fde4aa06f7c025bb05aa594716643b9010358f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: issue is with glibc, not gcc]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/ibm-sw-tpm2: fix glibc build errors

In order to not have to define all architecture bitness variants in
src/LibSupport.h to conditionally define RADIX_BITS, a patch was created
to depend on LONG_BIT being defined via limits.h

For glibc, LONG_BIT is behind a _XOPEN_SOURCE define guard so patch the
makefile to define this macro as well as _DEFAULT_SOURCE.

Defining _XOPEN_SOURCE requires _DEFAULT_SOURCE to be explicitly defined
for builds to succeed as it is no longer impliclty defined when
_XOPEN_SOURCE is defined.

Fixes:
http://autobuild.buildroot.net/results/bc145dd23c80a0660300766d0c114a00ed2e52b6/
http://autobuild.buildroot.net/results/1d84e70c30d4d0719274aa4f3edc01772beb24a3/

Fixes: 19bd089004 ("package/ibm-sw-tpm2: fix patch to address musl builds")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libunwind: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/dad61a90a27a97f275efd238ee22be704eab0063

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ghostscript: security bump to version 9.52

Fix a bunch of CVEs: CVE-2020-16287, CVE-2020-16288, CVE-2020-16289,
CVE-2020-16290, CVE-2020-16291, CVE-2020-16292, CVE-2020-16293,
CVE-2020-16294, CVE-2020-16295, CVE-2020-16296, CVE-2020-16297,
CVE-2020-16298, CVE-2020-16299, CVE-2020-16300, CVE-2020-16301,
CVE-2020-16302, CVE-2020-16303, CVE-2020-16304, CVE-2020-16305
CVE-2020-16308, CVE-2020-16309, CVE-2020-17538

PKGCONFIG must be passed since version 9.51 and
https://github.com/ArtifexSoftware/ghostpdl/commit/2d84ecc57837785b566ebd9d5909ba9edc9d697f

Also drop patch (already in version) and update indentation in hash file
(two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lttng-tools: fix build with musl

Fixes:
 - http://autobuild.buildroot.org/results/0c49b3e90361ced63cad4807dbe1b13c595f5f97

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ifplugd: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/63f7c6fc4a2a30c8eb0298856a2615f816d50299

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iftop: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/55a8581f11e776439782c228441ef1c8c1243386

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/collectd: add buddyinfo option

buddyinfo is available since version 5.11.0 and
https://github.com/collectd/collectd/commit/cb19ecf90d89a79836b8b5236d2b66277dd79c5f

It is currently enabled by default

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/collectd: add capabilities option

capabilities plugin is available since version 5.11.0 and
https://github.com/collectd/collectd/commit/b934f1572cdb54cf485b600546a72dbf9929ba2c

It is currently enabled by default depending on jansson and
libmicrohttpd availability

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/collectd: add InfluxDB support

InfluxDB support is available since version 5.11.0 and
https://github.com/collectd/collectd/commit/605fcdcddeefb23b945203079e5c87625ce0e336

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/collectd: add DPDK_TELEMETRY option

DPDK support is available since version 5.11.0 and
https://github.com/collectd/collectd/commit/00cbd4d2c016a676db476ae66bbc58d6bf11a6a0

It depends on jansson and is currently enabled by default raising the
following build failure on musl:

src/dpdk_telemetry.c:43:10: fatal error: sys/unistd.h: No such file or directory
 #include <sys/unistd.h>
          ^~~~~~~~~~~~~~

Fixes:
 - http://autobuild.buildroot.org/results/aafb8c72f147fefc7a988c45e4dc17de48b07a95

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libcamera: disable werror

This will fix the following build failure:

../src/gstreamer/gstlibcameraallocator.cpp: In static member function 'static GQuark FrameWrap::getQuark()':
/home/peko/autobuild/instance-1/output-1/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib/gatomic.h:128:15: error: variable 'gapg_temp_atomic' set but not used [-Werror=unused-but-set-variable]
     gpointer *gapg_temp_atomic = (gpointer *)(atomic);                       \
               ^

Fixes:
 - http://autobuild.buildroot.org/results/c28500d4cc55fbd2bac87f2c11759ddc9163bc91

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pistache: fix detection of atomic

pistache does not mandatory link with libatomic since
https://github.com/oktal/pistache/commit/4ed3f8e148dae203730139ae3c1c4c87bfc86c02
however the logic is broken because the C language is not enabled

Fixes:
 - http://autobuild.buildroot.org/results/17f05238a3479f5b0c9ef8f9bb42210f6fc14fff

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/opencv3: fix build with jasper >= 2.0.17

Fixes:
 - http://autobuild.buildroot.org/results/8da00d4b079195f45fe74d879b10db05d74d0559

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/opencv: fix build with jasper >= 2.0.17

Fixes:
 - http://autobuild.buildroot.org/results/656e2232a0566ba8f7826a87b1fab9cc2c3d8e46

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/fluidsynth: fix build with gcc 4.8

Fixes:
 - http://autobuild.buildroot.org/results/13cbba871db56ef8657a3d13c6ac8e1b4da0d244

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

Revert "package/libnss: enable parallel building"

This reverts commit 31602d8aaabaa9f55048c3db7a1b1b2fb2d27ef2 as it seems
that libnss still have parallel build issues.

Fixes:
 - http://autobuild.buildroot.org/results/521aaf8b41686865ea86688ea6410418b422fd55

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/bandwidthd: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/6308c8ee38b6017215038d47c009b238113bd36f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpv: atomic is mandatory

__sync builtins have been dropped since version 0.24.0 and
https://github.com/mpv-player/mpv/commit/c3205d294e519f994829d9355eb133670729aab4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bluez-alsa: update gcc 10 patch

Update patch by adding the missing update on src/ofono-iface.h from
https://github.com/Arkq/bluez-alsa/commit/30a23dd7ce9b00c702fa48545f6b03038f9e17c6

Fixes:
 - http://autobuild.buildroot.org/results/9200bdab254e24ecacd345c00216a3d87c014dfc

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpv: link with libatomic if needed

Fixes:
 - http://autobuild.buildroot.org/results/12f4580429427b6b546184366f74da16f83d692c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ibm-sw-tpm2: fix patch to address musl builds

Previously, __WORDSIZE was being used to define RADIX_BITS.

__WORDSIZE is not defined consistently via limits.h across all libc
variants, so use LONG_BIT instead.

Fixes:

  http://autobuild.buildroot.net/results/b5cb347a98dc64f77982633c0fc48d14030aa5b6/

Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/keepalived: ipset support only makes sense when iptables is enabled

In keepalived, ipset is only used when iptables support is
enabled. The configure.ac script is quite convoluted, but one can
clearly see:

AS_IF([test .$enable_iptables != .no],
  [
   ... testing for iptables ...
    if test $USE_IPTABLES = Yes; then
      dnl ----[Check for ipset libraries]----
      SAV_CPPFLAGS="$CPPFLAGS"
      CPPFLAGS="$CPPFLAGS $kernelinc"
      if test "${enable_libipset}" != no; then
      ... testing for libipset ...
    fi
  ]

So, the libipset library is only tested and used if iptables is
enabled. This is also visible by the code that shows at the end of the
configure script which features are enabled:

echo "Use iptables             : ${USE_IPTABLES}"
if test .$USE_IPTABLES = .Yes; then
  echo "Use libipset             : ${USE_LIBIPSET}"
fi

Once again, the libipset support only makes sense when iptables is
enabled.

However, the configure.ac script also has some logic to detect if a
--<something>-libipset option is passed while iptables is enabled:

AS_IF([test .$enable_iptables = .no],
    AS_IF([test .$enable_libipset != .], [AC_MSG_ERROR([disable-libipset requires vrrp and iptables])])
  )

The error message is quite misleading because it is in fact displayed
as soon as a --<something>-libipset is passed not just
--disable-libipset.

In the context of Buildroot, we are always passing a
--<something>-libipset, regardless of whether iptables support is
enabled or not, which makes the build error out:

configure: error: disable-libipset requires vrrp and iptables

This commit fixes that by enclosing the libipset logic inside the
iptables condition. When iptables is not available, we pass
--disable-iptables and that's it, nothing else is needed. When
iptables is available, we pass --enable-iptables *and*
--enable-libipset or --disable-libipset depending on the availability
of libipset.

This has been tested successfully with the following combinations:

 - keepalived, without iptables or libipset
 - keepalived, with iptables, but without libipset
 - keepalived, without iptables, but with libipset. In this case
   libipset is obviously not used.
 - keepalived, with iptables and with libipset. Both are used. Note
   that you will not see the keepalived binary linked with libipset.so
   in "readelf -d" because keepalived dlopen()s the libipset.so
   library by default.

Fixes:

  http://autobuild.buildroot.org/results/a1712b2cc3ad878e6876325ec7d4c434d0d9d11b/
  (case with --disable-libipset --disable-iptables)

  http://autobuild.buildroot.net/results/4567e3b0a0510e8a615781178ff5bbbd835a92c3/
  (case with --enable-libipset --disable-iptables)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

Revert "toolchain/toolchain-buildroot: enable uclibc for riscv64"

This reverts commit bd9810e176273914eca1208bcba23f0de9e446b3. Indeed,
while uClibc-ng has support for RISC-V 64-bit, this support lacks the
__riscv_flush_icache() function call, which is used by some GCC
builtins used for example in libffi.

Due to this missing __riscv_flush_icache(), anything that links
against libffi fails to build:

/home/test/autobuild/run/instance-0/output-1/host/bin/riscv64-buildroot-linux-uclibc-gcc  -o gobject/gobject-query gobject/gobject-query.p/gobject-query.c.o -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -Wl,--start-group glib/libglib-2.0.so.0.6400.4 gobject/libgobject-2.0.so.0.6400.4 -Wl,--end-group -pthread '-Wl,-rpath,$ORIGIN/../glib:$ORIGIN/' -Wl,-rpath-link,/home/test/autobuild/run/instance-0/output-1/build/libglib2-2.64.4/build/glib -Wl,-rpath-link,/home/test/autobuild/run/instance-0/output-1/build/libglib2-2.64.4/build/gobject
/home/test/autobuild/run/instance-0/output-1/host/lib/gcc/riscv64-buildroot-linux-uclibc/9.3.0/../../../../riscv64-buildroot-linux-uclibc/bin/ld: /home/test/autobuild/run/instance-0/output-1/host/riscv64-buildroot-linux-uclibc/sysroot/usr/lib64/libffi.so.7: undefined reference to `__riscv_flush_icache'
collect2: error: ld returned 1 exit status

Note that this commit means that
support/config-fragments/autobuild/br-riscv64-full-internal.config
will be back to using glibc as the C library, but that is OK, until
uClibc-ng is fixed to implemented __riscv_flush_icache().

This uClibc-ng issue has been reported upstream at
https://mailman.uclibc-ng.org/pipermail/devel/2020-August/002022.html.

Fixes:

  http://autobuild.buildroot.net/results/ec1185ad1fd8863a3990143a0af2ace987761a27/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pulseview: fix build with recent Qt versions

This commit backports an upstream commit to fix the build of pulseview
with recent Qt versions.

Note that pulseview has a 0.4.2 version (newer than our 0.4.1) but it
doesn't have the fix we need. And 0.4.2 now requires additional Qt
translation tools, so the update to 0.4.2 is anyway not
straightforward.

Fixes:

  http://autobuild.buildroot.net/results/c9e27a91905dfda0ba1ddb12c7910316d3ee82ef/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bird: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/3e01f490d76be03f21a0680eb162a0c0267fc1b9

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/drbd-utils: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/e444f46cd6e6d767592b17b83095737d0508a475

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kmsxx: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/7777cd9496e8f8cdb093c3f82c550eebedda0b5d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: drop Maxime Ripard from kmsxx maintainers

Maxime Ripard is no longer at Bootlin, his e-mail is bouncing:

<maxime.ripard@bootlin.com>: host spool.mail.gandi.net[217.70.178.1] said: 550
    5.1.1 <maxime.ripard@bootlin.com>: Recipient address rejected: User unknown
    in virtual mailbox table (in reply to RCPT TO command)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gitlab-ci: update the image version

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/misc/gitlab-ci.yml.in: use python3 for flake8

The pkg-stats script now uses Python3 only constructs (the "async"
keyword) and therefore fails to pass the Python2 flake8 test.

Let's use the Python3 flake8 instead.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/681711009

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/docker: drop Python 2.x modules

Since commit 4a40d36f131890941c1e482eb5f28ebcd81cb7a3
("support/testing: switch to Python 3 only") our runtime testing
infrastructure is Python 3.x only.

Therefore, it is no longer needed to have python-nose2 and
python-pexpect in the Docker container used to run our Gitlab CI jobs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/qemu_*: bump kernel version to 5.4.58

Bump configs/qemu_* to latest longterm kernel 5.4.42.

All defconfig using a specific kernel version (csky, risc32) are not
taken into account.

Build and runtime tested: https://gitlab.com/jugurthaB/buildroot/-/pipelines/177882458

Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/redis: bump to version 6.0.6

>From the release notes:

================================================================================
Redis 6.0.6     Released Mon Jul 20 09:31:30 IDT 2020
================================================================================

Upgrade urgency MODERATE: several bugs with moderate impact are fixed here.

The most important issues are listed here:

* Fix crash when enabling CLIENT TRACKING with prefix
* EXEC always fails with EXECABORT and multi-state is cleared
* RESTORE ABSTTL won't store expired keys into the db
* redis-cli better handling of non-pritable key names
* TLS: Ignore client cert when tls-auth-clients off
* Tracking: fix invalidation message on flush
* Notify systemd on Sentinel startup
* Fix crash on a misuse of STRALGO
* Few fixes in module API
* Fix a few rare leaks (STRALGO error misuse, Sentinel)
* Fix a possible invalid access in defrag of scripts (unlikely to cause real harm)

New features:

* LPOS command to search in a list
* Use user+pass for MIGRATE in redis-cli and redis-benchmark in cluster mode
* redis-cli support TLS for --pipe, --rdb and --replica options
* TLS: Session caching configuration support
================================================================================

Also, the reference hashes repo has moved to redis/redis-hashes
probably because the original maintainer has stepped down, see
http://antirez.com/news/133

Finally, the copyright year in the COPYING file has been updated,
and so does its sha256 checksum.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/supertux: fix build with boost 1.73.0

Fixes:
 - http://autobuild.buildroot.org/results/0f02877a665b2281266df4b23c72a7c113906c31

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd: add openal optional dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/docker: use python3-flake8

support/scripts/pkg-stats now uses some Python 3.x only constructs
("async" and related keywords), so we must use the Python 3.x flake8.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/scanpypi: use raw strings in re.compile/re.sub

Fixes the following Python 3.x flake8 warning:

W605 invalid escape sequence '\w'

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/getdeveloperlib.py: use raw strings for re.compile/re.match

Fixes the following Python 3.x flake8 warning:

W605 invalid escape sequence '\s'

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing/tests/core/test_timezone.py: fix indentation

Fixes:

support/testing/tests/core/test_timezone.py:7:9: E117 over-indented

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: consistently use raw strings for re.compile

Otherwise Python 3.x flake8 complains with:

W605 invalid escape sequence '\s'

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/{check-package, checkpackagelib}: consistently use raw strings for re.compile

Raw strings need to be used when calling re.compile() otherwise Python
3.x flake8 complains with:

W605 invalid escape sequence '\s'

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/18xx-ti-utils: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/df2d04de4b2e5003f3fc56c9e84db5054bd4d499

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cvs: fix mktime related compile failure

Use ac_cv_func_working_mktime=yes to force the use of a provided
mktime implementation instead of compiling the failing own one.

Fixes:

  http://autobuild.buildroot.net/results/5bcd8f4235002da682cc900f866116d2fe87f1c8

  mktime.c: In function 'ydhms_diff':
  mktime.c:106:52: error: size of array 'a' is negative
   #define verify(name, assertion) struct name { char a[(assertion) ? 1 : -1]; }
                                                      ^
  mktime.c:170:3: note: in expansion of macro 'verify'
     verify (long_int_year_and_yday_are_wide_enough,
     ^~~~~~

with the failure/assert comming from the lines:

  verify (long_int_year_and_yday_are_wide_enough,
          INT_MAX <= LONG_MAX / 2 || TIME_T_MAX <= UINT_MAX);

which fails since the y2038 time_t conversion from 32bit to 64bit
(musl libc).

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd: add fluidsynth optional dependency

fluidsynth is an optional dependency of mpd since version 0.18.5 and
https://github.com/MusicPlayerDaemon/MPD/commit/727c6226597fb710239b14e7985d97ec6b53f0ee

It is enabled by default

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fluidsynth: needs dynamic library

applications, such as mpd, fail to build statically with fluidsynth
because fluidsynth does not fill Libs.Private in their pkg-config file

Because fluidsynth is a cmake-package with many dependencies, it is not
easy to fix so just add a dynamic library dependency.

Here is an extract of src/CMakeLists.txt that gives the list of
fluidsynth possible dependencies:

target_link_libraries ( libfluidsynth
${GLIB_LIBRARIES}
${GMODULE_LIBRARIES}
${LASH_LIBRARIES}
${JACK_LIBRARIES}
${ALSA_LIBRARIES}
${PULSE_LIBRARIES}
${PORTAUDIO_LIBRARIES}
${LIBSNDFILE_LIBRARIES}
${SDL2_LIBRARIES}
${DBUS_LIBRARIES}
${READLINE_LIBS}
${DART_LIBS}
${COREAUDIO_LIBS}
${COREMIDI_LIBS}
${WINDOWS_LIBS}
${MidiShare_LIBS}
${OpenSLES_LIBS}
${OBOE_LIBS}
${LIBFLUID_LIBS}
${LIBINSTPATCH_LIBRARIES}
)

Fixes:
 - http://autobuild.buildroot.org/results/ec9dd2903359b9bf6b15c8cb69e732f8cb6c4d39

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rtl8821au: add patch fixing sprintf error

Fixes compile errors against certain kernels.

Signed-off-by: Christian Stewart <christian@paral.in>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/capnproto: add openssl optional dependency

openssl is an optional dependency that is enabled by default since
version 0.7.0 and
https://github.com/capnproto/capnproto/commit/23db5e3fd91104a0b2881d8f8ab3c10bf9dd8e75

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mender-artifact: use github helper for site URL

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mender-artifact: do not download modules during the build process

By default, go will attempt to download needed modules before building, which
is not desirable. This behavior also causes permission issues when cleaning,
as go downloads modules as read-only by default. Because mender-artifact
includes the modules in the vendor directory, mod=vendor prevents the package
from downloading the go modules during the build process and prevents
permission issues when cleaning.

Fixes:
http://autobuild.buildroot.net/results/d5bcaca73ae74fe8b0ebd39b6331564cd639fb66

Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>