Tapani Pälli [Tue, 10 Mar 2020 07:21:09 +0000 (09:21 +0200)]
iris: toggle on PIPE_CAP_MIXED_COLOR_DEPTH_BITS
This enables additional EGL configs where we have depth/stencil buffer
with different number of bits per pixel than color buffer has. This
enables some Android games to work that require such config.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4127>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4127>
Hyunjun Ko [Thu, 5 Mar 2020 06:59:55 +0000 (06:59 +0000)]
turnip: Add tu6_control struct.
Follow the way that freedreno is doing so that we could see the whole
layout of the scratch buffer.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>
Hyunjun Ko [Thu, 20 Feb 2020 05:41:55 +0000 (14:41 +0900)]
turnip: Enable VK_EXT_transform_feedback
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>
Hyunjun Ko [Thu, 20 Feb 2020 06:46:57 +0000 (15:46 +0900)]
turnip: Implement an empty function vkCmdDrawIndirectByteCountEXT
TODO. We should implement this since indirect draw is enabled.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>
Hyunjun Ko [Tue, 25 Feb 2020 01:08:25 +0000 (10:08 +0900)]
turnip: Implement stream-out emit and vkApis for transform feedback
1. Implement vkCmdBindTransformFeedbackBuffersEXT,
vkCmdBeginTransformFeedbackEXT and vkCmdEndTransformFeedbackEXT.
- Not handling counter buffers yet.
2. Implement streamout emit function, mostly taken from fd6_emit.c
v2. Replace emit_pkt4 funcs with emit_regs.
v3. Don't copy the state of stream-output from tu_pipeline.
v4. Set zero to VPC_SO_CNTL/VPC_SO_BUF_CNTL in tu6_init_hw.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>
Hyunjun Ko [Tue, 25 Feb 2020 01:07:25 +0000 (10:07 +0900)]
turnip: Setup stream-output when linking program
Mostly taken from fd6_program.c.
v2. Note that it forces to use full VS instead of binning pass VS if
there's stream output as the binning pass VS will have outputs on
other than position/psize stripped out, which is the same as freedreno.
v3. fix indentation.
v4. Use register index instead of location when setup streamout.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>
Hyunjun Ko [Thu, 20 Feb 2020 05:54:35 +0000 (14:54 +0900)]
turnip: Define structs for transform feedback
Define new structures for streamout buffers and state.
Most members of the state struct are taken from freedreno driver.
v2. Use IR3_MAX_SO_* and avoid using magic values.
v3. Remove the state of stream-output in tu_cmd_state and use one in
tu_pipeline and split out reset and enabled fields.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>
Hyunjun Ko [Thu, 20 Feb 2020 05:48:28 +0000 (14:48 +0900)]
turnip: Gather information for transform feedback
- Add one member to the existed ir3_stream_output so that we could
assign location information from nir_xfb_info, rather than defining
new struct.
- Redefine maximum of so buffers, streams and outputs, which will be
used for turnip.
- Also enable caps for transform feedback for spirv_to_nir.
v2. Remove redefined maximums and use IR3_MAX_SO_* and add
IR3_MAX_SO_STREAMS.
v3. Remove the newly added location field so that we could keep aligned
with 32 bytes. Instead we create an array mapping between the location
and consecutive index, which is GL driver is doing.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>
David Stevens [Thu, 5 Mar 2020 03:52:38 +0000 (12:52 +0900)]
egl/android: set window usage flags
When creating an egl surface from an ANativeWindow, the window's usage
flags need to be set so that buffers are allocated properly.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lepton Wu <lepton@chromium.org>
Eric Anholt [Tue, 3 Mar 2020 22:38:09 +0000 (14:38 -0800)]
ci: Make a simple little bare-metal fastboot mode for db410c.
This supports powering up the device (using an external tool you
provide based on your particular lab), talking over serial to wait for
the fastboot prompt, and then booting a fastboot image on a target
device.
I was previously relying on LAVA for this, but that ran afoul of
corporate policies related to the AGPL. However, LAVA wasn't doing
too much for us, given that gitlab already has a job scheduler and
tagging and runners. We were spending a lot of engineering on making
the two systems match up, when we can just have gitlab do it directly.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Eric Anholt [Thu, 5 Mar 2020 23:26:28 +0000 (15:26 -0800)]
ci: Fix installation of firmware for db410c's nic.
The debian firmware package doesn't actually contain it, costing us a
minute of boot time waiting for it to show up.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Eric Anholt [Thu, 5 Mar 2020 22:35:55 +0000 (14:35 -0800)]
ci: Print the renderer/version that our dEQP invocation is using.
This is useful for sanity checking how the driver loads.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Yevhenii Kolesnikov [Fri, 3 Jan 2020 14:37:00 +0000 (16:37 +0200)]
intel/compiler: fix cmod propagation optimisations
Knowing following:
- CMP writes to flag register the result of
applying cmod to the `src0 - src1`.
After that it stores the same value to dst.
Other instructions first store their result to
dst, and then store cmod(dst) to the flag
register.
- inst is either CMP or MOV
- inst->dst is null
- inst->src[0] overlaps with scan_inst->dst
- inst->src[1] is zero
- scan_inst wrote to a flag register
There can be three possible paths:
- scan_inst is CMP:
Considering that src0 is either 0x0 (false),
or 0xffffffff (true), and src1 is 0x0:
- If inst's cmod is NZ, we can always remove
scan_inst: NZ is invariant for false and true. This
holds even if src0 is NaN: .nz is the only cmod,
that returns true for NaN.
- .g is invariant if src0 has a UD type
- .l is invariant if src0 has a D type
- scan_inst and inst have the same cmod:
If scan_inst is anything than CMP, it already
wrote the appropriate value to the flag register.
- else:
We can change cmod of scan_inst to that of inst,
and remove inst. It is valid as long as we make
sure that no instruction uses the flag register
between scan_inst and inst.
Nine new cmod_propagation unit tests:
- cmp_cmpnz
- cmp_cmpg
- plnnz_cmpnz
- plnnz_cmpz (*)
- plnnz_sel_cmpz
- cmp_cmpg_D
- cmp_cmpg_UD (*)
- cmp_cmpl_D (*)
- cmp_cmpl_UD
(*) this would fail without changes to brw_fs_cmod_propagation.
This fixes optimisation that used to be illegal (see issue #2154)
= Before =
0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
1: cmp.nz.f0.0(8) null:F, vgrf0:F, 0f
= After =
0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
Now it is optimised as such (note change of cmod in line 0):
= Before =
0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
1: cmp.nz.f0.0(8) null:F, vgrf0:F, 0f
= After =
0: linterp.nz.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
No shaderdb changes
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2154
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3348>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3348>
Alyssa Rosenzweig [Wed, 11 Mar 2020 19:17:25 +0000 (15:17 -0400)]
pan/bi: Fix swizzle for second argument to ST_VARY
Off-by-one.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 19:15:41 +0000 (15:15 -0400)]
pan/bi: Implement nir_op_ffma
We have native FMA which works for graphics usage (unlike Midgard where
it's really reserved for compute for various reasons), let's use it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 19:10:32 +0000 (15:10 -0400)]
pan/bi: Add dead code elimination pass
Now that we have liveness analysis, we can cleanup the IR considerably.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 18:54:49 +0000 (14:54 -0400)]
pan/bi: Add liveness analysis pass
Now that all the guts are shared with Midgard, it's just a matter of
wiring it in.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 18:51:57 +0000 (14:51 -0400)]
pan/bi: Add bi_max_temp helper
Instead of trying to reindex all the times, just be okay with consistent
but sparse indices, then figuring out the max index is easy enough.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 18:48:55 +0000 (14:48 -0400)]
pan/bi: Add bi_next/prev_op helpers
From Midgard. These are surprisingly helpful.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 18:46:01 +0000 (14:46 -0400)]
pan/bi: Add bi_bytemask_of_read_components helpers
Same purpose as the Midgard version, but the implementation is
*dramatically* simpler thanks to our more regular IR.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 18:40:01 +0000 (14:40 -0400)]
pan/bi: Paste over bi_has_arg
While we're at it, cleanup the Midgard one.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 18:35:38 +0000 (14:35 -0400)]
panfrost: Sync Midgard/Bifrost control flow
We can move e v e n more code to be shared and let bi_block inherit from
pan_block, which will allow us to use the shared data flow analysis.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 17:58:10 +0000 (13:58 -0400)]
panfrost: Move liveness analysis to root panfrost/
This way we can share the code with Bifrost.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 12:36:31 +0000 (08:36 -0400)]
pan/midgard: Subclass midgard_block from pan_block
Promote as much as we feasibly can while keeping it Midgard/Bifrost
agnostic.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 12:22:08 +0000 (08:22 -0400)]
pan/midgard: Sync midgard_block field names with Bifrost
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 12:09:29 +0000 (08:09 -0400)]
pan/midgard: Decontextualize liveness analysis core
We mostly just need the temp_count from it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 12:03:28 +0000 (08:03 -0400)]
pan/midgard: Localize `visited` tracking
Instead of a property on the block, just track it within the function to
minimize IR dependencies.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Tue, 10 Mar 2020 20:20:18 +0000 (16:20 -0400)]
pan/bi: Implement sysvals
Now that it's all abstracted nicely with an implementation shared with
Midgard, this is pretty easy to get.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Tue, 10 Mar 2020 20:09:44 +0000 (16:09 -0400)]
pan/bi: Switch to panfrost_program
...now that it's shared.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Tue, 10 Mar 2020 20:06:30 +0000 (16:06 -0400)]
panfrost: Move Midgard sysval code to common Panfrost
We'll use this all as-is in Bifrost.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Tue, 10 Mar 2020 20:19:33 +0000 (16:19 -0400)]
pan/midgard: Remove dest_override sysval argument
Unused, noticed while working on porting over to Bifrost.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Tue, 10 Mar 2020 20:00:56 +0000 (16:00 -0400)]
pan/midgard: Decontextualize midgard_nir_assign_sysval_body
Now all sysval code should be fairly generic.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Tue, 10 Mar 2020 19:54:17 +0000 (15:54 -0400)]
pan/midgard: Remove indexing dependency of sysvals
Ideally we would sync the compilers to use the same indexing scheme but
that's a lot more Midgard refactoring than I have time for right now.
This is good enough honestly.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Tue, 10 Mar 2020 19:48:52 +0000 (15:48 -0400)]
pan/midgard: Adjust sysval-related prototypes
We'd like to share this big chunk of code with Bifrost but that requires
removing the compiler_context parameter... which is totally unused in
fact!
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Wed, 11 Mar 2020 12:37:58 +0000 (08:37 -0400)]
pan/midgard: Remove unused iterators
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Alyssa Rosenzweig [Tue, 10 Mar 2020 19:41:56 +0000 (15:41 -0400)]
panfrost: Promote midgard_program to panfrost/util
We'll want Bifrost to reuse the same linking mechanisms for the most
part.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Samuel Pitoiset [Wed, 4 Mar 2020 08:37:46 +0000 (09:37 +0100)]
gitlab-ci: build RADV in meson-i386 to avoid 32-bit build failures
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4044>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4044>
Samuel Pitoiset [Wed, 11 Mar 2020 15:07:18 +0000 (16:07 +0100)]
radv: fix 32-bits build (again)
Fixes: dcfc08f5b8a ("radv/sqtt: describe begin/end command buffers with user markers")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4044>
Marek Olšák [Wed, 12 Feb 2020 22:49:45 +0000 (17:49 -0500)]
mesa: don't unroll glMultiDrawElements with user indices for gallium
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>
Marek Olšák [Fri, 14 Feb 2020 21:01:50 +0000 (16:01 -0500)]
gallium: add PIPE_CAP_DRAW_INFO_START_WITH_USER_INDICES
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>
Marek Olšák [Sun, 8 Mar 2020 21:58:49 +0000 (17:58 -0400)]
vbo: fix vbo_copy_vertices for GL_PATCHES and adjacency primitive types
Fixes: 4c6323c49f1 - vbo: handle GS and tess primitive types when splitting Begin/End
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>
Marek Olšák [Thu, 27 Feb 2020 21:04:00 +0000 (16:04 -0500)]
vbo: fix transitions from glVertexN to glVertexM where M < N
Fixes: 1f6e53e2 "vbo: don't store glVertex values temporarily into exec"
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>
Marek Olšák [Thu, 27 Feb 2020 20:46:11 +0000 (15:46 -0500)]
vbo: use vbo_exec_wrap_upgrade_vertex for glVertex in ATTR_UNION
We can't decrease the size for glVertex before a flush,
so use vbo_exec_wrap_upgrade_vertex directly.
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>
Marek Olšák [Sat, 2 Nov 2019 03:55:58 +0000 (23:55 -0400)]
st/mesa: keep serialized NIR instead of nir_shader in st_program
This decreases memory usage, because serialized NIR is more compact.
The first variant is created from nir_shader for uncached shaders.
All other variants are created from serialized NIR.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2909>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2909>
Michel Dänzer [Tue, 10 Mar 2020 09:16:47 +0000 (10:16 +0100)]
gitlab-ci: Don't restrict ppc64el/s390x build jobs to gstreamer runners
The packet runners have beefier CPUs now and don't seem to run into
test timeouts anymore.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4128>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4128>
Andres Gomez [Sat, 7 Mar 2020 23:32:17 +0000 (01:32 +0200)]
gitlab-ci: Sort packages to install alphabetically
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Andres Gomez [Sat, 7 Mar 2020 23:30:45 +0000 (01:30 +0200)]
gitlab-ci: Remove unneeded python3-pilkit dependency
It was added with tracie, but it doesn't depend on it.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Andres Gomez [Sat, 7 Mar 2020 23:29:02 +0000 (01:29 +0200)]
gitlab-ci: Fix indentation and dangerous "\" in the last multiline line
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Chris Lord [Thu, 5 Mar 2020 16:37:53 +0000 (16:37 +0000)]
vc4: Fix query_dmabuf_modifiers mis-reporting external_only property
vc4_screen_query_dmabuf_modifiers doesn't consider that the given format
may only be supported by lowering, which only happens for external
textures.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4063>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4063>
Timur Kristóf [Mon, 9 Mar 2020 15:27:54 +0000 (16:27 +0100)]
aco: Don't store TCS outputs to LDS when we're sure that none are read.
This allows us not to write an output to LDS, even if it has
an indirect offset.
No pipeline DB changes.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Sat, 7 Mar 2020 00:51:39 +0000 (01:51 +0100)]
aco: Only write TCS outputs to LDS when they are read by the TCS.
Note that tess factors are always read at the end of the shader,
so those are still always saved to LDS.
Totals from affected shaders:
VGPRS: 25244 -> 25164 (-0.32 %)
Code Size:
1768268 ->
1690804 (-4.38 %) bytes
Max Waves: 4947 -> 4953 (0.12 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 6 Mar 2020 19:24:55 +0000 (21:24 +0200)]
aco: Store tess factors in VMEM only at the end of the shader.
This optimizes out several superfluous stores of the tess factors,
especially if the shader wrote those outputs multiple times.
Pipeline DB changes on GFX10:
Totals from affected shaders:
SGPRS: 30384 -> 29536 (-2.79 %)
Code Size:
2260720 ->
2214484 (-2.05 %) bytes
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Mon, 24 Feb 2020 14:27:43 +0000 (15:27 +0100)]
aco: Don't generate an if when the first part of a merged HS or GS is empty.
In some cases (eg. in a few tessellation CTS tests) the VS part of
a merged HS is completely empty. Let's not generate a divergent if
in these cases. (LLVM also doesn't do it.)
No pipeline DB changes, only affects the CTS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Sat, 29 Feb 2020 10:59:58 +0000 (11:59 +0100)]
radv: Enable ACO on all stages.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Sat, 29 Feb 2020 10:57:58 +0000 (11:57 +0100)]
aco: Enable running TES as ES, including merged TES+GS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Thu, 27 Feb 2020 19:05:16 +0000 (20:05 +0100)]
radv: Enable ACO for TES when there is no GS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 28 Feb 2020 14:27:41 +0000 (15:27 +0100)]
aco: Implement loading TES inputs.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 6 Mar 2020 11:52:35 +0000 (13:52 +0200)]
aco: Enable streamout when TES runs on the HW VS stage.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 6 Mar 2020 11:51:17 +0000 (13:51 +0200)]
aco: Store TES outputs when TES runs on the HW VS stage.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Thu, 27 Feb 2020 18:59:37 +0000 (19:59 +0100)]
aco: Use TES output info when TES runs on the VS stage.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Thu, 27 Feb 2020 18:56:35 +0000 (19:56 +0100)]
aco: Setup tessellation evaluation shader variables.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Wed, 26 Feb 2020 17:31:34 +0000 (18:31 +0100)]
radv: Enable ACO for tessellation control shaders.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Mon, 9 Mar 2020 11:44:03 +0000 (12:44 +0100)]
aco: Fix LS VGPR init bug on affected hardware.
Vega 10 and Raven have a HW bug: when the HS thread count is zero,
the LS input arguments are loaded in the wrong registers. This commit
works around this by using the registers where the data actually is,
for the affected arguments.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Tue, 18 Feb 2020 16:51:05 +0000 (17:51 +0100)]
aco: Store VS outputs correctly when tessellation is used.
When tessellation is used, the VS runs on the HW LS stage (merged
into HS on GFX9-10). This commit enables such VS to store its
outputs properly in LDS so that the TCS can load them as its
per-vertex inputs.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 21 Feb 2020 16:46:15 +0000 (17:46 +0100)]
aco: Implement tessellation control shader input/output.
Tessellation control shaders can have per-vertex inputs,
and both per-vertex and per-patch outputs. TCS can not only store,
but also load their outputs.
The TCS outputs are stored in RING_HS_TESS_OFFCHIP in VMEM, which
is where the TES reads them from. Additionally, the are also stored
in LDS to make sure they can be loaded fast when read by the TCS.
Tessellation factors are always just stored in LDS.
At the end of the shader, the first shader invocation reads these
from LDS and writes them to RING_HS_TESS_FACTOR in VMEM, and
additionally to RING_HS_TESS_OFFCHIP when they are read by
the Tessellation Evaluation Shader.
This implementation matches the memory layouts used by radv_nir_to_llvm.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Mon, 9 Mar 2020 16:07:41 +0000 (17:07 +0100)]
aco: Fix combining DS additions in the optimizer.
Previously, it was calculated incorrectly for 64-bit writes and reads.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Wed, 26 Feb 2020 17:24:42 +0000 (18:24 +0100)]
aco: Slight fix to lds_store and lds_load.
This commit fixes lds_store and lds_load so that they can
properly support 32 and 64-bit loads and stores; and makes
them a little more reusable so they can be used by
tessellation control shaders.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 28 Feb 2020 15:20:01 +0000 (16:20 +0100)]
aco: Refactor VS output stores in preparation for tessellation.
This commit takes the new helpers into use by the VS output
store function. This function is also where the VS outputs will
be handled when the VS runs on the HW LS stage.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 28 Feb 2020 15:06:19 +0000 (16:06 +0100)]
aco: Refactor load_per_vertex_input in preparation for tessellation.
This commit carves out the GS per-vertex input load, and takes the
new helper functions into use.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 28 Feb 2020 14:50:54 +0000 (15:50 +0100)]
aco: Introduce new helpers for calculating address offsets.
These helpers are going to make it unnecessary to reimplement the
(almost) same address offset calculation in mulitple places.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 28 Feb 2020 14:48:01 +0000 (15:48 +0100)]
aco: Introduce new VMEM load/store helpers.
These are going to be used for loading and storing inputs
and outputs in various stages, such as GS, TCS and TES.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Tue, 18 Feb 2020 19:21:20 +0000 (20:21 +0100)]
aco: Remove esgs_itemsize from LDS alignment calculation.
It was problematic to have it, because some shader stages might
not even know about the esgs_itemsize, for example TCS and
the merged VS+TCS stages.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Tue, 18 Feb 2020 15:54:44 +0000 (16:54 +0100)]
aco: Extract LDS alignment calculation to a separate function.
This function is going to be reused in multiple functions when
storing or loading something in the LDS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Wed, 12 Feb 2020 13:27:05 +0000 (14:27 +0100)]
aco: Remove vertex_geometry_gs assertion from merged shaders.
We are going to support more kinds of merged shaders, such
as vertex_tess_control_hs and tess_eval_geometry_gs.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Tue, 18 Feb 2020 14:55:54 +0000 (15:55 +0100)]
aco: Use mesa shader stage when loading inputs.
This makes it more clear which stages should load these inputs.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Wed, 12 Feb 2020 14:33:02 +0000 (15:33 +0100)]
aco: Setup correct HW stages when tessellation is used.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Sat, 7 Mar 2020 17:26:52 +0000 (18:26 +0100)]
aco: Implement load_view_index for TCS and TES.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Fri, 6 Mar 2020 12:02:03 +0000 (14:02 +0200)]
aco: Implement memory_barrier_tcs_patch.
TCS outputs are going to be written to LDS, so it
has to use memory_barrier_shared in order to ensure
that it waits for LDS writes.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Wed, 26 Feb 2020 16:41:04 +0000 (17:41 +0100)]
aco: Implement control_barrier for tessellation control shaders.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Wed, 12 Feb 2020 13:28:29 +0000 (14:28 +0100)]
aco: Implement load_invocation_id for tessellation control shaders.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Tue, 25 Feb 2020 12:20:36 +0000 (13:20 +0100)]
aco: Implement load_patch_vertices_in.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Mon, 24 Feb 2020 16:10:13 +0000 (17:10 +0100)]
aco: Implement load_primitive_id for tessellation shaders.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Mon, 17 Feb 2020 15:56:39 +0000 (16:56 +0100)]
aco: Implement load_tess_coord.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Wed, 12 Feb 2020 14:22:17 +0000 (15:22 +0100)]
aco: Setup tessellation control shader variables.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Wed, 12 Feb 2020 13:23:17 +0000 (14:23 +0100)]
aco: Extract setup_gs_variables into a separate function.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Timur Kristóf [Mon, 24 Feb 2020 14:44:48 +0000 (15:44 +0100)]
radv: Move some helper functions to the radv_shader.h header file.
Move calculate_tess_lds_size and get_tcs_num_patches to radv_shader.h
ACO will need to call these functions too.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Pierre-Eric Pelloux-Prayer [Sun, 8 Mar 2020 08:01:42 +0000 (09:01 +0100)]
vdpau: remove bogus assert
The assert introduced by
24f2b0a8560 triggers when an application
requests a chroma_type that's different to the one from the
PIPE_VIDEO_CAP_PREFERED_FORMAT (before this change the chroma_type
was set but ignored).
So restore this behavior and ignore the chroma_type.
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Fixes: 24f2b0a8560 ("gallium/video: remove pipe_video_buffer.chroma_format")
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4104>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4104>
Samuel Pitoiset [Tue, 10 Mar 2020 17:35:15 +0000 (18:35 +0100)]
radv: do not recursively begin/end render pass for meta operations
To avoid breaking SQTT user markers that are emitted to report
barriers and layout transitions to RGP.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4136>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4136>
Vasily Khoruzhick [Tue, 10 Mar 2020 08:11:11 +0000 (01:11 -0700)]
lima/gpir: print acc ops even if we have only one source
floor and sign have only one source, so we need to print acc ops
even if src1 is unused.
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4110>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4110>
Vasily Khoruzhick [Sun, 8 Mar 2020 23:38:21 +0000 (16:38 -0700)]
lima/gpir: improve disassembler output
Print each op at new line and add unit name suffix for each op.
It improves readability a bit and gives us a hint what unit
was used for particular op.
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4110>
Vasily Khoruzhick [Sun, 8 Mar 2020 18:05:12 +0000 (11:05 -0700)]
lima: print gp uniforms if gp debug is enabled
Since we keep other constants there as well it's useful for reading disassembly.
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4110>
Samuel Pitoiset [Mon, 9 Mar 2020 16:53:51 +0000 (17:53 +0100)]
gitlab-ci: add rules:changes for RADV
Including mesa_core_file_list is probably not the best but it's
better than nothing.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4117>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4117>
John Stultz [Tue, 10 Mar 2020 03:27:35 +0000 (03:27 +0000)]
gallium: hud_context: Fix scalar initializer warning.
When trying to build mesa/master under AOSP, I've run into the
following error:
external/mesa3d/src/gallium/auxiliary/hud/hud_context.c:1821:31: error: braces around scalar initializer [-Werror,-Wbraced-scalar-init]
struct sigaction action = {{0}};
^~~
1 error generated.
This patch addresses this by switching to using memset instead of
using an initializer.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4141>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4141>
John Stultz [Tue, 10 Mar 2020 03:37:44 +0000 (03:37 +0000)]
panfrost: Move pan_afbc.c file to the the right Makefile.source file
It seems pan_afbc.c was added to the wrong Makefile.sources file.
So fix this, so we don't run into build issues with mesa/master
trying to build under AOSP.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4141>
John Stultz [Tue, 10 Mar 2020 03:14:34 +0000 (03:14 +0000)]
freedreno: Add ir3_cf.c and ir3_delay.c to Makefile.sources
This patch adds missing ir3_cf.c and ir3_delay.c files to
the Makefile.sources file to address build issues seen
when trying to build mesa/master on AOSP
Signed-off-by: John Stultz <john.stultz@linaro.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4141>
Marek Olšák [Thu, 5 Mar 2020 20:09:28 +0000 (15:09 -0500)]
gallium/cso_context: remove cso_delete_xxx_shader helpers to fix the live cache
With the live shader cache, equivalent shaders can be backed by the same
CSO. This breaks the logic that identifies whether the shader being deleted
is bound.
For example, having shaders A and B, you can bind shader A and delete
shader B. Deleting shader B will unbind shader A if they are equivalent.
Pierre-Eric figured out the root cause for this issue.
Fixes: 0db74f479b9 - radeonsi: use the live shader cache
Closes: #2596
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4078>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4078>
Eric Engestrom [Tue, 10 Mar 2020 17:54:41 +0000 (18:54 +0100)]
vulkan/wsi: fix cleanup when dup() fails
Fixes: f5433e4d6ce247b86dae ("vulkan/wsi: Add modifiers support to wsi_create_native_image")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4137>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4137>
Karol Herbst [Tue, 10 Mar 2020 22:41:26 +0000 (22:41 +0000)]
Revert "gallium: make handles of set_global_binding 64 bit"
This reverts commit
e1ffb72a05f9b50ee47767aaadbab3e47896ee14
Karol Herbst [Fri, 28 Feb 2020 14:54:08 +0000 (15:54 +0100)]
gallium: make handles of set_global_binding 64 bit
needed by CL
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4072>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4072>
Alyssa Rosenzweig [Tue, 10 Mar 2020 12:21:35 +0000 (08:21 -0400)]
pan/bi: Implement comparison opcodes via BI_CMP
Pretty straightforward for the moment. Ideally these would be fused into
csel/branches but that will come a bit later.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4139>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4139>
projects / mesa.git / log