Eric Le Bihan [Sun, 29 Oct 2017 13:10:52 +0000 (14:10 +0100)]
docs/manual: document meson-based packages
Add instructions for adding a package which uses the Meson build system.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Eric Le Bihan [Sun, 29 Oct 2017 13:10:51 +0000 (14:10 +0100)]
meson: new package
This new package provides the host variant of the Meson Build System, an
open source build system meant to be both extremely fast, and as user
friendly as possible.
More precisely, Meson creates configuration files for the Ninja build
system.
Besides building Meson, it generates a configuration file
("$(HOST_DIR)/etc/meson/cross-compilation.conf") to be used when
cross-compiling a Meson-based project.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Marcus Folkesson [Thu, 21 Dec 2017 23:19:59 +0000 (00:19 +0100)]
libostree: add patch to fix compilation error
Fix the following compilation error:
src/libostree/ostree-repo-pull.c:1493:1: error: no previous prototype
for '_ostree_repo_verify_bindings' [-Werror=missing-prototypes]
The patch is submitted upstreams (
8d3d14503b3105f93db635022e881e02688f2db4)
and should be removed in the next version bump.
Fixes:
http://autobuild.buildroot.net/results/
3fc91565cb2d0fabe566c109257a616bd57cb08c
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Marcus Folkesson [Thu, 21 Dec 2017 23:19:32 +0000 (00:19 +0100)]
libostree: make sure libavahi-client is built
Avahi support also needs libavahi-client, which is built by avahi if avahi-daemon
and dbus is selected.
Fixes:
http://autobuild.buildroot.net/results/
1edfb60add17945eabc557e1dbfb08a0ba466df9/
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: drop dependency on dbus, since libostree only needs avahi.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Thu, 28 Dec 2017 13:43:18 +0000 (14:43 +0100)]
package/nut: don't build in parallel
The conditions are not trivial to reproduce, but it can happen that the
headers are not fully regenerated by the time they are included.
This only happens when a python and/or perl interpreter are available,
with a high number of jobs and a high load.
Fixes:
http://autobuild.buildroot.org/results/523/
5231ff39a0839ec5e1962662004214d4b0773068/
http://autobuild.buildroot.org/results/5a7/
5a75d44c028e77b58f0fd9ab794952f2b477dd84/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Tue, 26 Dec 2017 23:39:04 +0000 (00:39 +0100)]
Config.in.legacy: update comment that old entries have been removed
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Tue, 26 Dec 2017 23:39:03 +0000 (00:39 +0100)]
Config.in.legacy: drop 2013.02 entries
When we release 2018.02 at the end of this cycle, those entries will
have been removed for more than five years, so we can drop them now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Tue, 26 Dec 2017 23:39:02 +0000 (00:39 +0100)]
Config.in.legacy: drop 2012.11 entries
Those entries are older than 5 years, we can drop them now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Tue, 26 Dec 2017 23:39:01 +0000 (00:39 +0100)]
Config.in.legacy: drop 2012.08 entries
Those entries are older than 5 years, we can drop them now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Seiderer [Wed, 27 Dec 2017 22:36:41 +0000 (23:36 +0100)]
package/qt5/qt5scxml: fix qt5declarative dependency
This commit makes additional improvements after commit
187d24701ded6bec598e4aec272033f33f158de7 ("package/qt5/qt5scxml: needs
qt5declarative package") :
- add qt5declarative depends comment
- add missing qt5declarative dependency
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Tue, 26 Dec 2017 23:20:45 +0000 (00:20 +0100)]
fs/ubifs: split long line, use simple asignment
This line has been sitting there unchanged for years now, but it does
not follow current best pratices, that is:
- do not use imediate assignment,
- split lines longer than ~80 chars.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bartosz Bilas [Wed, 27 Dec 2017 12:54:20 +0000 (13:54 +0100)]
package/qt5/qt5scxml: needs qt5declarative package
qt5scxml package needs qml-private module which is delivered by
qt5declarative.
Fixes:
http://autobuild.buildroot.net/results/
9e650f6147f7858be74782806f4b8d2aac4c689a/
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[Thomas: add missing dependency on BR2_PACKAGE_QT5_JSCORE_AVAILABLE,
adjust commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Wed, 27 Dec 2017 18:08:10 +0000 (13:08 -0500)]
libpqxx: bump to 6.0.0
Other changes:
- Add a hash for the license file.
- Change the URL from pqxx.org to the official GitHub repository, as releases
are no longer being posted to the old download mirror.
- Remove the patch, this has been fixed in the upstream code for some time.
- Remove AUTORECONF, as it is no longer necessary because the patch has been
removed.
- Require gcc >= 4.7, as C++11 is now mandatory:
http://pqxx.org/development/libpqxx/
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Wed, 27 Dec 2017 17:41:27 +0000 (12:41 -0500)]
janus-gateway: bump to v0.2.6
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Wed, 27 Dec 2017 05:54:52 +0000 (07:54 +0200)]
libv4l: restore LFS mismatch fix patch
Restore the patch that commit
9345b85b47 (libv4l: bump to version
1.12.6) has wrongly removed. This is needed for LFS builds for 32bit
targets.
Fixes:
http://autobuild.buildroot.net/results/461/
46100c008c894e3f998227b2a9c9a79bfcbbda7c/
http://autobuild.buildroot.net/results/63b/
63babd09b8a64fd4da80d99c4c2aed25e5532aec/
http://autobuild.buildroot.net/results/92b/
92bd49d881ed11b2540e434af57ae7347ac186d2/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Sat, 23 Dec 2017 19:29:43 +0000 (21:29 +0200)]
json-c: bump to version 0.13
Use upstream provided tarball; drop autoreconf.
Drop -Werror removal patch; json-c builds fine with gcc 7 without this
patch.
Drop upstream libm patch.
Drop --disable-oldname-compat; removed upstream.
Add license file hash.
Enable parallel build. The commit introducing MAKE1,
ecd0f65af92
(json-c: bump to version 0.11) does not explain the reason for that. A
sequence of a few builds on a multi-core system never faild.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Sat, 23 Dec 2017 17:43:03 +0000 (19:43 +0200)]
cryptsetup: add json-c dependency to host build
Fixes:
http://autobuild.buildroot.net/results/ecf/
ecf5d87791e0255c3fce117447105db88749f796/
http://autobuild.buildroot.net/results/384/
38462d222f2a893d44de894c30dc1e53d09c377d/
http://autobuild.buildroot.net/results/c29/
c2901415345d94ef2135e460f4c78c21ae7ad09a/
... and many more.
Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Sat, 23 Dec 2017 17:43:02 +0000 (19:43 +0200)]
json-c: build for host
This is needed for the recent cryptsetup version host build.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Tue, 26 Dec 2017 17:46:31 +0000 (15:46 -0200)]
linux-headers: bump 4.{1, 4, 9, 14}.x series
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Tue, 26 Dec 2017 17:46:30 +0000 (15:46 -0200)]
linux: bump default to version 4.14.9
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adam Duskett [Tue, 26 Dec 2017 17:36:22 +0000 (12:36 -0500)]
libressl: bump to 2.6.4
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Tue, 26 Dec 2017 13:14:25 +0000 (14:14 +0100)]
package/libpqxx: fix broken sed call
Backport 2 upstream fix.
Fixes:
http://autobuild.buildroot.net/results/0d1/
0d131f9fa5cce259d999f7d57f9092675bfc24c7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Tue, 26 Dec 2017 13:19:21 +0000 (14:19 +0100)]
package/mfgtools: bump to 0.02
Bump mfgtools to include the fix [1] for the C++ build issue reported
by the autobuilders.
This bump include only 4 small commits fixing memory leak and this
build issue.
Remove CPOL.htm (removed upstream) from MFGTOOLS_LICENSE_FILES but CPOL
license is still valid.
Add the README.txt file to MFGTOOLS_LICENSE_FILES since it contains
licensing informations:
Licenses:
- CPOL: MfgToolLib/XmlLite.CPP and XmlLite.h
- BSD: Others.
Add license file hash.
[1] https://github.com/codeauroraforum/mfgtools/commit/
b370a43e548440025d274ff2abbb25342bbaa78c
Fixes:
http://autobuild.buildroot.net/results/
7c2bbbe13ab315684f3502afd96958a76879b1d5
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Mon, 25 Dec 2017 20:20:52 +0000 (22:20 +0200)]
libv4l: bump to version 1.12.6
Use https URL to avoid redirect.
Drop non-LFS compatibility patch; we do not support non-LFS build
anymore.
Add license files hashes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Sun, 24 Dec 2017 20:00:35 +0000 (22:00 +0200)]
libassuan: bump to version 2.5.1
Add cryptographically secure sha256 hash and a reference to upstream
signature.
Add license files hashes.
Cc: Philipp Claves <claves@budelmann-elektronik.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Sun, 24 Dec 2017 19:49:12 +0000 (21:49 +0200)]
faad2: bump to version 2.8.8
Drop patch; issue fixed upstream.
Add license file hash.
Revert back to .tar.gz since that is what upstream provides.
Remove autoreconf; tarball has configure script.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Sun, 24 Dec 2017 18:41:59 +0000 (20:41 +0200)]
nettle: bump to version 3.4
Add link to upstream signature.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Fri, 22 Dec 2017 12:03:22 +0000 (14:03 +0200)]
luksmeta: enabled build with musl
cryptsetup is available under musl since commit
f71507d41bcb00 (lvm2:
make basic package available under musl). Enable luksmeta as well.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Fri, 22 Dec 2017 12:03:21 +0000 (14:03 +0200)]
cryptsetup: bump to version 2.0.0
Add the now mandatory json-c depencecy. Propagate to reverse
dependencies.
Drop the no longer needed patch.
Add license files hashes.
[Peter: propagate _HAS_SYNC_4 dependency to comments as pointed out by
Thomas]
Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Fri, 22 Dec 2017 11:37:22 +0000 (12:37 +0100)]
DEVELOPERS: add myself to mesa3d
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Fri, 22 Dec 2017 11:37:21 +0000 (12:37 +0100)]
package/{mesa3d, mesa3d-headers}: bump version to 17.3.1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Fri, 22 Dec 2017 10:27:38 +0000 (12:27 +0200)]
alsa-utils: bump to version 1.1.5
Add license hash.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Fri, 22 Dec 2017 10:27:37 +0000 (12:27 +0200)]
alsa-lib: bump to version 1.1.5
Drop upstream patches; renumber the rest.
Add license files hashes.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Fri, 22 Dec 2017 11:15:27 +0000 (13:15 +0200)]
xfsprogs: update homepage link
The old SGI site is not accessible anymore. Use the link from the README
file.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Fri, 22 Dec 2017 11:15:26 +0000 (13:15 +0200)]
xfsprogs: bump to version 4.14.0
Add licenses and hashes for these licenses.
Enabled build with musl; the non standard types have been removed
upstream. Fixes bug #10581.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 21 Dec 2017 21:46:58 +0000 (22:46 +0100)]
wireguard: bump to version 0.0.
20171221
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Thu, 21 Dec 2017 16:48:17 +0000 (17:48 +0100)]
package/libcue: is not parallel-safe
The last commit before the 1.4.0 release was to disable parallel build [1]
[1] https://github.com/lipnitsk/libcue/commit/
bebbc18a8c00a0b8c26bc6191af68c6a83629b40
Fixes:
http://autobuild.buildroot.net/results/f25/
f256037ca3d49f96add8ca2e2f9c980f5f9d764e
http://autobuild.buildroot.net/results/d84/
d84c7d0cb9cf5fa9996c42149eda5295700516f5
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Fri, 22 Dec 2017 05:54:20 +0000 (07:54 +0200)]
strace: bump to version 4.20
Drop upstream patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mario Lang [Tue, 19 Dec 2017 21:14:31 +0000 (22:14 +0100)]
package/brltty: disable X11 support for now
This stops xbrlapi from building/installing, which is really not essential
to almost all users.
Fixes:
http://autobuild.buildroot.net/results/
3fe2d053dcfdf5af791e9127f3e9f1dceaabfdc0
http://autobuild.buildroot.net/results/
6cfa5e9d37ac1571dc58df538232bb9e1749e62a
Signed-off-by: Mario Lang <mlang@blind.guru>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adrian Perez de Castro [Thu, 21 Dec 2017 13:36:30 +0000 (15:36 +0200)]
webkitgtk: security bimp to version 2.18.4
This is a maintenance release of the current stable WebKitGTK+ version,
which contains fixes for CVE-2017-13866, CVE-2017-13870, CVE-2017-7156, and
CVE-2017-13856. Additionally, this release brings improvements in the
WebDriver spec-compliance, plugs several memory leaks in its GStreamer based
multimedia backend, and fixes a bug when handling cookie removal.
Release notes can be found in the announcement:
https://webkitgtk.org/2017/12/19/webkitgtk2.18.4-released.html
More details about the security fixes are provided in the following
WebKitGTK+ Security Advisory report:
https://webkitgtk.org/security/WSA-2017-0010.html
Last but not least, this new release includes the fix for honoring the
CMAKE_BUILD_TYPE value from CMake toolchain files and the corresponding
patch is removed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Wed, 20 Dec 2017 16:02:51 +0000 (18:02 +0200)]
pulseaudio: fix libsamplerate dependency
The (deprecated) libsamplerate support is not enabled unless
--enable-samplerate is passed to configure. Fix this.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Wed, 20 Dec 2017 16:02:50 +0000 (18:02 +0200)]
pulseaudio: normalize alsa-lib optional dependency
Put together alsa-lib dependency and configure option code. As a side
effect we now avoid alsa-lib dependency when the required support in
alsa is missing.
Use positive logic.
Explicitly enable alsa support when available.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Tue, 19 Dec 2017 21:56:29 +0000 (22:56 +0100)]
nasm: bump to version 2.13.02
And add a hash for the license file.
Release notes:
http://www.nasm.us/doc/nasmdocc.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 20 Dec 2017 11:26:01 +0000 (12:26 +0100)]
qemu: security bump to version 2.10.2
Fixes the following security issues:
CVE-2017-13672: QEMU (aka Quick Emulator), when built with the VGA display
emulator support, allows local guest OS privileged users to cause a denial
of service (out-of-bounds read and QEMU process crash) via vectors involving
display update.
CVE-2017-15118: Stack buffer overflow in NBD server triggered via long
export name
CVE-2017-15119: DoS via large option request
CVE-2017-15268: Qemu through 2.10.0 allows remote attackers to cause a
memory leak by triggering slow data-channel read operations, related to
io/channel-websock.c.
For more details, see the release announcement:
https://lists.nongnu.org/archive/html/qemu-devel/2017-12/msg03618.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Marcus Folkesson [Wed, 20 Dec 2017 10:01:30 +0000 (11:01 +0100)]
libostree: bump to version 2017.15
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:39 +0000 (10:53 +0100)]
board: Add Orangepi PC2 support
Add initial support for Orangepi PC2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:38 +0000 (10:53 +0100)]
board: Add Orangepi Zero Plus2 support
Add initial support for Orangepi Zero Plus2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:37 +0000 (10:53 +0100)]
board: Add Orangepi Prime support
Add initial support for Orangepi Prime
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:36 +0000 (10:53 +0100)]
board: Add Orangepi Win/Win Plus support
Add initial support for Orangepi Win/Win Plus
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:35 +0000 (10:53 +0100)]
board: Add Olimex A64-OLinuXino support
Add initial support for Olimex A64-OLinuXino
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Tsvetan Usunov <usunov@olimex.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:34 +0000 (10:53 +0100)]
board: Add FriendlyARM Nanopi NEO2 support
Add initial support for FriendlyARM Nanopi NEO2 board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:33 +0000 (10:53 +0100)]
board: Add FriendlyARM Nanopi A64 support
Add initial support for FriendlyARM Nanopi A64
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:32 +0000 (10:53 +0100)]
board: Add SoPine support
Add initial support for SoPine board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:31 +0000 (10:53 +0100)]
board: Add Pine64 support
Add initial support for Pine64 board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jagan Teki [Wed, 20 Dec 2017 09:53:30 +0000 (10:53 +0100)]
board: Add Bananapi M64 support
Add initial support for bananapi M64 board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Wed, 20 Dec 2017 15:16:27 +0000 (17:16 +0200)]
libsoxr: remove unicode dash from help text
This would make the unicode challenged menuconfig show something
sensible.
Split the sentence for the text to make sense.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Wed, 20 Dec 2017 12:36:02 +0000 (10:36 -0200)]
linux-headers: bump 4.{4, 9, 14}.x series
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Wed, 20 Dec 2017 12:36:01 +0000 (10:36 -0200)]
linux: bump default to version 4.14.8
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Tue, 19 Dec 2017 20:01:19 +0000 (21:01 +0100)]
webp: bump to version 0.6.1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Tue, 19 Dec 2017 11:56:28 +0000 (12:56 +0100)]
rsync: add upstream security fix for CVE-2017-16548
The receive_xattr function in xattrs.c in rsync 3.1.2 and 3.1.3-development
does not check for a trailing '\0' character in an xattr name, which allows
remote attackers to cause a denial of service (heap-based buffer over-read
and application crash) or possibly have unspecified other impact by sending
crafted data to the daemon.
For more details, see:
https://bugzilla.samba.org/show_bug.cgi?id=13112
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sam Voss [Tue, 19 Dec 2017 14:47:31 +0000 (08:47 -0600)]
package/linux-firmware: Add Atheros 10k (QCA998X)
Add drivers for Atheros 10k (QCA998X) chipset.
Both firmware versions are imported, and unused should be pruned as
required.
[Peter: use upper case 'K' in symbol name]
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 19 Dec 2017 15:12:32 +0000 (17:12 +0200)]
pulseaudio: remove the ConsoleKit module
The ConsoleKit module is loaded by default from the default.pa
configuration file, but its initialization fails because Buildroot has
no ConsoleKit package yet. This breaks per-user pulseaudio daemon.
The default.pa configuration load module-console-kit only when it
exists. Remove module-console-kit to fix pulseaudio per-user startup.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Damien Riegel [Mon, 18 Dec 2017 21:19:35 +0000 (16:19 -0500)]
lldpd: remove check on CXX compiler
lldpd currently depends on a C++ compiler to configure properly, but
the package doesn't select that option, so builds fail if
BR2_TOOLCHAIN_BUILDROOT_CXX is not selected with following errors:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: in `/home/dkc/src/buildroot/build-zii/build/lldpd-0.9.4':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
This package actually builds fine without C++, so drop this check in
configure.ac. Attached patch has already been accepted upstream [1].
[1] https://github.com/vincentbernat/lldpd/pull/261
[Peter: adjust autoreconf comment]
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Reviewed-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Mon, 18 Dec 2017 21:52:06 +0000 (22:52 +0100)]
vlc: set back upnp support
Commit
cb7aa25df8c3c4531354fd0f7d69208f89360c7b has disabled upnp support
as --disable-upnp and --enable-upnp are both set if libupnp or libupnp18
is enabled
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sun, 17 Dec 2017 08:55:53 +0000 (09:55 +0100)]
boot/arm-trusted-firmware: build fiptool separately with dependency on host-openssl
ATF >= 1.3 builds a host program called fiptool which uses
OpenSSL, so we need to build host-openssl. We could have made it an
optional dependency like U-Boot does, but since most ATF versions are
going to be >= 1.3 in the near future, we simply make host-openssl a
mandatory dependency.
However, the ATF build system is not very good, and you can't easily
pass flags that will affect the build of host programs. Therefore, we
take the approach of building fiptool separately before triggering the
real build process.
It would obviously be better to fix ATF itself, but as usual with
those bootloader packages, we fetch different versions depending on
the platform/configuration, making it difficult to use patches.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/
44868961
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Martin Bark [Mon, 18 Dec 2017 18:17:34 +0000 (18:17 +0000)]
package/nodejs: security bump to version 8.9.3
See https://nodejs.org/en/blog/release/v8.9.3/
[Peter: mention that this fixes security issues]
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mario Lang [Mon, 18 Dec 2017 09:51:43 +0000 (10:51 +0100)]
package/brltty: disable features and add optional dependencies
* --without-midi-package should fix a number of autobuild failures.
* Disable a number of speech drivers to avoid build failures
if they are installed on the host.
* Optional dependency on espeak and flite fixes builds where
espeak or flite are installed on the host.
Fixes:
http://autobuild.buildroot.net/results/
0c4f557c2ad276b1ed065119532af37c0af5f014
http://autobuild.buildroot.net/results/
ea82b7c7732821368746ddddb5d529e97c9b6c16
Signed-off-by: Mario Lang <mlang@blind.guru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexey Roslyakov [Mon, 18 Dec 2017 14:00:16 +0000 (21:00 +0700)]
utils/scanpypi: increase error message verbosity
When package installation fails it is good to know what happened.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mario Lang [Mon, 18 Dec 2017 10:18:09 +0000 (11:18 +0100)]
DEVELOPERS: merge duplicated entry for Mario Lang
Signed-off-by: Mario Lang <mlang@blind.guru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Sat, 16 Dec 2017 20:42:41 +0000 (22:42 +0200)]
libgpgme: fix build on MIPS with older kernel headers
MIPS N64 ABI has been missing getdents64 wire up until kernel version
3.10. Disable use of getdents on older kernels.
Fixes:
http://autobuild.buildroot.net/results/961/
9619062ce6642ae4121d7debb3b4c632c88723d5/
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Philipp Claves <claves@budelmann-elektronik.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Mon, 18 Dec 2017 08:07:05 +0000 (09:07 +0100)]
python-keyring: bump to version 10.5.0
Fix licence information and add licence checksum.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Mon, 18 Dec 2017 08:07:04 +0000 (09:07 +0100)]
python-cffi: add missing runtime dependency
python-pycparser is mentioned in setup.py as install_requires, so
select it in Config.in.
As python-cffi will be installed with python-crossbar's dependencies,
remove it from python-crossbar's Config.in.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Mon, 18 Dec 2017 06:32:17 +0000 (07:32 +0100)]
package/live555: bump version to 2017.10.28
Added license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Mon, 18 Dec 2017 06:30:36 +0000 (07:30 +0100)]
package/libdrm: bump version to 2.4.89
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Mon, 18 Dec 2017 06:29:11 +0000 (07:29 +0100)]
package/ffmpeg: add optional support for openjpeg
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Mon, 18 Dec 2017 06:29:10 +0000 (07:29 +0100)]
package/ffmpeg: bump version to 3.4.1
Configure options for libnut & libschroedinger were removed:
http://git.videolan.org/?p=ffmpeg.git;a=commit;h=
a3deeaade32db5a1b736b8d3365e52254f3fa6ac
http://git.videolan.org/?p=ffmpeg.git;a=commit;h=
220b24c7c97dc033ceab1510549f66d0e7b52ef1
Upstream now prefers NASM assembler over YASM:
http://git.videolan.org/?p=ffmpeg.git;a=commit;h=
4f9297ac3b39098547863d28fbc8d2a906d5be49
Added configure options for alsa support:
http://git.videolan.org/?p=ffmpeg.git;a=commitdiff;h=
b447629093d75f18d0a8fc44ec768022322b2182
Added configure options for libiconv:
http://git.videolan.org/?p=ffmpeg.git;a=commitdiff;h=
fe9c85e4e2650dc9537b54b1eabb4f9be7b628ed
Added license hashes.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Sun, 17 Dec 2017 21:48:24 +0000 (23:48 +0200)]
iproute2: fix configure output file name
iproute2 renamed the configure script output file to config.mk. Update
the config tweaking code accordingly.
The configure script now detects xtables correctly, drop this part.
Add a comment to explain the TC_CONFIG_XT disable tweak.
Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Sun, 17 Dec 2017 21:48:23 +0000 (23:48 +0200)]
iproute2: fix build with threads support disabled
iproute2 renamed the configure script generated file to config.mk.
Update the berkeleydb disable code.
Fixes:
http://autobuild.buildroot.net/results/46d/
46da1142806fb524326994585cec6de9f7f3f480/
http://autobuild.buildroot.net/results/3aa/
3aa028fe9e730335d2af00d5969b674a3d9f640b/
Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 17 Dec 2017 13:53:46 +0000 (14:53 +0100)]
package/linphone: remove ffmpeg-related patches
The linphone package never provided video support.
While this commit
https://git.buildroot.net/buildroot/commit/package/linphone?id=
dec04466549cd40e2696ae7725e90d6559bee640
added support for ffmpeg 3.0+ the next commit, which fixed the build of
the bundled mediastreamer2 library, added --disable-video:
https://git.buildroot.net/buildroot/commit/package/linphone?id=
f3492b28d89c1f2448c9662a6f755cb48e8c0f0b
At this point the ffmpeg 3.0 patches could have been removed because
ffmpeg is only used if video support is enabled:
https://github.com/BelledonneCommunications/mediastreamer2/blob/
6c2a608800a221942f2a827e0abb60346e7d065f/acinclude.m4#L80
https://github.com/BelledonneCommunications/mediastreamer2/blob/
6c2a608800a221942f2a827e0abb60346e7d065f/acinclude.m4#L107
This patch catches up on that to avoid changing the upstream URL for
the patches which is broken.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Estevam [Sun, 17 Dec 2017 15:24:26 +0000 (13:24 -0200)]
linux-headers: bump 4.14.x series
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Estevam [Sun, 17 Dec 2017 15:24:25 +0000 (13:24 -0200)]
linux: bump default to version 4.14.7
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 17 Dec 2017 12:18:45 +0000 (13:18 +0100)]
package/vlc: add optional dependency to libupnp18
Upstream added support for libupnp-1.8:
http://git.videolan.org/?p=vlc/vlc-2.2.git;a=commit;h=
825dca78be3a81e2a1c5d04137aa01b1cb32dfd3
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabrice Fontaine [Sun, 17 Dec 2017 11:59:32 +0000 (12:59 +0100)]
vlc: fix build with libupnp above 1.6.23
Backport patch already available upstream
Fixes:
- http://autobuild.buildroot.net/results/
d98bdcc745a2480d4664db2427f0ae1c9c5ea71e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 18 Dec 2017 08:52:00 +0000 (09:52 +0100)]
shapelib: fix legal information
Following the bump of shapelib in commit
333f5605958283c58f21a990bb5e36067489b72b, the licensing information
got broken, as the LICENSE.LGPL file is now named COPYING.
While at it, let's add the hashes for the license files.
Fixes:
http://autobuild.buildroot.net/results/
978db9ea9f04ad465252316e2f31085516a123bb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 18 Dec 2017 08:25:24 +0000 (09:25 +0100)]
package/*/Config.in: fix consecutive lines check-package warnings
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 18 Dec 2017 08:24:38 +0000 (09:24 +0100)]
package/*/Config.in: fix property order warning of check-package
This commit fixes the ordering of the Config.in option properties, as
reported by check-package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 18 Dec 2017 08:21:05 +0000 (09:21 +0100)]
package/*/Config.in: fix help text check-package warnings
This commit fixes the warnings reported by check-package on the help
text of all package Config.in files, related to the formatting of the
help text: should start with a tab, then 2 spaces, then at most 62
characters.
The vast majority of warnings fixed were caused by too long lines. A
few warnings were related to spaces being used instead of a tab to
indent the help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jerzy Grzegorek [Sun, 17 Dec 2017 10:24:52 +0000 (11:24 +0100)]
package: remove the default value of the $(PKG)_SOURCE variable
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jerzy Grzegorek [Sun, 17 Dec 2017 10:13:50 +0000 (11:13 +0100)]
package: remove the empty trailing whitespaces
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mario Lang [Mon, 27 Nov 2017 22:56:45 +0000 (23:56 +0100)]
brltty: new package
Signed-off-by: Mario Lang <mlang@blind.guru>
[Thomas:
- wrap too long CONF_OPTS line that disables all the language
bindings
- use an intermediate BRLTTY_TEXT_TABLE variable to store the
qstripped version of BR2_PACKAGE_BRLTTY_TEXT_TABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Zoltan Gyarmati [Sat, 16 Dec 2017 23:53:01 +0000 (00:53 +0100)]
package/shapelib: bump to version 1.4.1
This new version needs proj as a dependency, and provides an
autotools-based build system.
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Zoltan Gyarmati [Sat, 16 Dec 2017 23:52:59 +0000 (00:52 +0100)]
proj: new package
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- switch to the autotools build system, which supports static linking
properly
- add <pkg>_LICENSE_FILES
- add sha256 hash for the tarball, in addition to the md5 one
- add license file hash
- squash DEVELOPERS file addition]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Seiderer [Fri, 8 Dec 2017 21:29:52 +0000 (22:29 +0100)]
gdb: prevent installation of libbfd.so and libopcode.so
The gdb install target installs dynamic versions of libbfd and
libopcode, accidentally overwriting the binutils provided versions
(gdb itself links against the bundled static ones to avoid
version problems, so the dynamic ones are un-needed).
Prevent the installation by using the '--disable-install-libbfd'
configure option.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sun, 17 Dec 2017 08:56:04 +0000 (09:56 +0100)]
traceroute: pass INSTALL=$(INSTALL) as install time
As reported by Peter, using cp during the installation isn't correct,
as it follows symbolic links, potentially over-writing the busybox
binary through its traceroute symbolic link. To avoid that, we pass
INSTALL=$(INSTALL) during the installation step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Estevam [Sat, 16 Dec 2017 19:38:07 +0000 (17:38 -0200)]
linux-headers: bump 4.{4, 9}.x series
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yegor Yefremov [Wed, 13 Dec 2017 09:04:23 +0000 (10:04 +0100)]
python-secretstorage: new package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Wed, 13 Dec 2017 09:04:21 +0000 (10:04 +0100)]
python-more-itertools: new package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sergio Prado [Mon, 11 Dec 2017 22:17:41 +0000 (20:17 -0200)]
pimd: new package
pimd is a lightweight stand-alone PIM-SM v2 multicast routing daemon.
Tested on Beaglebone Black.
Build-tested with test-pkg script.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sergio Prado [Sat, 16 Dec 2017 13:01:49 +0000 (11:01 -0200)]
traceroute: new package
Tested on Beaglebone Black.
Build-tested with test-pkg.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas:
- remove file removal in install command
- use DESTDIR and prefix instead of just prefix in install command.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Sat, 16 Dec 2017 08:25:27 +0000 (09:25 +0100)]
shairport-sync: bump to version 3.1.6
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
projects / buildroot.git / log