2011-05-26  Pedro Alves  <pedro@codesourcery.com>

gdb/
* infcmd.c (finish_backward): Set a step-resume breakpoint at the
function's entry point instead of a manually managed momentary
breakpoint, and only ever issue one proceed call.
* infrun.c (handle_inferior_event) <BPSTAT_WHAT_STEP_RESUME>: If
doing a reverse-finish, switch to stepi mode, to do another step.
(insert_step_resume_breakpoint_at_sal): Make public.
(normal_stop): No need to save function value return registers if
going reverse.
* inferior.h (insert_step_resume_breakpoint_at_sal): Declare.

gdb/testsuite/
* gdb.reverse/finish-reverse-bkpt.exp: New test.

2011-05-26  Pedro Alves  <pedro@codesourcery.com>

gdb/
* breakpoint.h (enum bptype) <bp_hp_step_resume>: New.
(enum bpstat_what_main_action): Move BPSTAT_WHAT_STEP_RESUME
before BPSTAT_WHAT_STOP_SILENT.  Add BPSTAT_WHAT_HP_STEP_RESUME
at the end.
* breakpoint.c (update_breakpoints_after_exec): Also delete hp
step-resume breakpoints.
(print_it_typical): Handle bp_hp_step_resume.
(bpstat_what): Ditto.
(bptype_string): Ditto.
(print_one_breakpoint_location): Ditto.
(allocate_bp_location): Ditto.
(mention): Ditto.
(breakpoint_re_set_one): Ditto.
* infrun.c (handle_inferior_event): Adjust.  Split
BPSTAT_WHAT_STEP_RESUME handling in BPSTAT_WHAT_STEP_RESUME and
BPSTAT_WHAT_HP_STEP_RESUME.
(insert_step_resume_breakpoint_at_sal): Rename to ...
(insert_step_resume_breakpoint_at_sal_1): ... this.  Add bptype
parameter.  Handle it.
(insert_step_resume_breakpoint_at_sal): Reimplement on top of
insert_step_resume_breakpoint_at_sal_1.
(insert_step_resume_breakpoint_at_frame): Rename to ...
(insert_hp_step_resume_breakpoint_at_frame): ... this.  Adjust to
set a high-priority step-resume breakpoint.
(insert_step_resume_breakpoint_at_frame): Adjust comment.
(insert_step_resume_breakpoint_at_caller): Ditto.

gdb/testsuite/
* gdb.reverse/next-reverse-bkpt-over-sr.exp: New test.

2011-05-26  Pedro Alves  <pedro@codesourcery.com>

gdb/
* breakpoint.c (iterate_over_related_breakpoints): New.
(do_map_delete_breakpoint): New.
(delete_command): Pass do_map_delete_breakpoint to
map_breakpoint_numbers.
(do_disable_breakpoint): New.
(do_map_disable_breakpoint): Iterate over the breakpoint's related
breakpoints.
(do_enable_breakpoint): Rename to ...
(enable_breakpoint_disp): ... this.
(enable_breakpoint): Adjust.
(do_enable_breakpoint): New.
(enable_once_breakpoint): Delete.
(do_map_enable_breakpoint): New.
(do_map_enable_once_breakpoint): New.
(enable_once_command, enable_delete_command)
(delete_trace_command): Iterate over the breakpoint's related
breakpoints.

* alpha-tdep.c (alpha_cannot_fetch_register): Don't return true
for ALPHA_ZERO_REGNUM.
(alpha_supply_int_regs): Explicitly supply zero as the value for
ALPHA_ZERO_REGNUM in the register cache.
* alpha-nat.c (fetch_osf_core_registers): Ditto.

Handle R_X86_64_TPOFF64 in executable.

bfd/

2011-05-26  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/12809
* elf64-x86-64.c (elf_x86_64_relocate_section): Handle
R_X86_64_TPOFF64 in executable.

ld/testsuite/

2011-05-26  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/12809
* ld-x86-64/tlsbin.s: Add a test for LE with large model.

* ld-x86-64/tlsbin.dd: Updated.
* ld-x86-64/tlsbin.rd: Likewise.
* ld-x86-64/tlsbin.sd: Likewise.
* ld-x86-64/tlsbin.td: Likewise.
* ld-x86-64/tlsbindesc.dd: Likewise.
* ld-x86-64/tlsbindesc.rd: Likewise.
* ld-x86-64/tlsbindesc.sd: Likewise.
* ld-x86-64/tlsbindesc.td: Likewise.

2011-05-26  Yao Qi  <yao@codesourcery.com>

* gdb/gdb_thread_db.h: Remove HAVE_UINTPTR_T.

2011-05-26  Tristan Gingold  <gingold@adacore.com>

* symfile.h (struct dwarf2_section_names): New type.
(struct dwarf2_debug_sections): New type.
(dwarf2_has_info): Add parameter.
* dwarf2read.c (dwarf2_elf_names): New variable.
(INFO_SECTION, ABBREV_SECTION, LINE_SECTION, LOC_SECTION)
(MACINFO_SECTION, STR_SECTION, RANGES_SECTION, TYPES_SECTION)
(FRAME_SECTION, EH_FRAME_SECTION, GDB_INDEX_SECTION): Remove.
(dwarf2_has_info): Add names parameter.  Pass names
to dwarf2_locate_sections.
(section_is_p): Rewrite using the names parameter.
(dwarf2_locate_sections): Use section names from the names parameter.
* coffread.c (coff_symfile_read): Adjust call to dwarf2_has_info.
* elfread.c (read_psyms): Ditto.
* machoread.c (macho_symfile_read): Ditto.

* elf-bfd.h (SYMBOL_REFERENCES_LOCAL): Remove most of comment.
* elflink.c (_bfd_elf_symbol_refs_local_p): Expand
local_protected comment.

sim: bfin: switch to new syscall trace level

Now that the common code supports the syscall trace level, change the
Blackfin code from using the event level to the syscall level.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: add syscall tracing level

It's useful to be able to trace just the system calls the simulated
program is calling, so add a new --trace-syscall option for ports to
leverage if they choose.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

*** empty log message ***

daily update

* dwarf.c (loc_offsets): New variable.
(loc_offsets_compar): New routine.
(display_debug_loc): Handle loc_offsets not being in ascending order
and also a single .debug_loc entry being used multiple times.

sim: bfin: move model data into machs.h

Pull the model data (register addresses/sizes) out of the different model
files and into the machs.h header.  The models themselves don't care about
where they're mapped, only the mach code does.  This allows us to keep the
model headers from being included in the mach code which can cause issues
with model-specific names colliding.  Such as when a newer device model is
created, but with incompatible register names/layouts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: bfin: add a performance monitor stub

No counters get updated, but there is enough here for software to
poke things and work.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: bfin: add bf526-0.2/bf54x-0.4 rom regions

Add regions for the on-chip roms on some newer Blackfin parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2011-05-25  Tristan Gingold  <gingold@adacore.com>

* configure.in (bfd_elf32_ia64_big_vec, bfd_elf32_ia64_hpux_big_vec)
(bfd_elf64_ia64_big_vec, bfd_elf64_ia64_hpux_big_vec)
(bfd_elf64_ia64_little_vec, bfd_elf64_ia64_vms_vec): Add elfxx-ia64.lo
* Makefile.am (BFD64_BACKENDS): Add elfxx-ia64.lo
(BFD64_BACKENDS_CFILES): Add elfxx-ia64.c
(elf32-ia64.c): Created from elfnn-ia64.c
(elf64-ia64.c): Likewise.
* elfxx-ia64.h: New file.
* elfxx-ia64.c: Split with elfnn-ia64.c.  Keep only the following
functions.Includes elfxx-ia64.h.
(elfNN_ia64_reloc): Renames to ia64_elf_reloc.  Adjust error message.
(IA64_HOWTO): Adjust.
(lookup_howto): Renames to ia64_elf_lookup_howto.  Make it public.
(elfNN_ia64_reloc_type_lookup): Renames to
ia64_elf_reloc_type_lookup. Make it public. Adjust calls.
(elfNN_ia64_reloc_name_lookup): Renames to
ia64_elf_reloc_name_lookup. Make it public.
(elfNN_ia64_relax_br): Renames to ia64_elf_relax_br.  Make it public.
(elfNN_ia64_relax_brl): Renames to ia64_elf_relax_brl. Make it
public.
(elfNN_ia64_relax_ldxmov): Renames to ia64_elf_relax_ldxmov.
Move it and make it public.  Move prototype to elfxx-ia64.h
(elfNN_ia64_install_value): Renames to ia64_elf_install_value.
Move prototype to elfxx-ia64.h
* elfnn-ia64.c: New file, split from elfxx-ia64.c.
(elfNN_ia64_info_to_howto): Adjust calls.
(elfNN_ia64_relax_section): Adjust calls.
(count_dyn_reloc): Fix typo.
(elfNN_ia64_relocate_section): Adjust calls.
(elfNN_ia64_finish_dynamic_symbol): Likewise.
(bfd_elfNN_bfd_reloc_type_lookup)
(bfd_elfNN_bfd_reloc_name_lookup): Adjust macros.

PR gdb/8677
* event-loop.c (handle_file_event): Don't handle POLLHUP as error.

* dirsearch.cc (Dirsearch::find): Replace n1 and n2 parameters
with name parameter.  Add found_name parameter.
* fileread.cc (Input_file::find_file): Adjust code accordingly.
* dirsearch.h (class Dirsearch): Update declaration.

* archive.cc (Library_base::should_include_member): Pull in object
from archive if it defines the entry symbol.
* parameters.cc (Parameters::entry): New function.
* parameters.h (class Parameters): Declare entry.
* output.h (class Output_file_header): Remove entry_ field.
* output.cc (Output_file_header::Output_file_header): Remove entry
parameter.  Change all callers.
(Output_file_header::entry): Use parameters->entry.
* gold.cc (queue_middle_tasks): Likewise.
* plugin.cc (Plugin_hook::run): Likewise.

*** empty log message ***

daily update

* gold.cc (queue_initial_tasks): Pass incremental base filename
to Output_file::open_base_file; don't print error message.
* incremental-dump.cc (main): Adjust call to
Output_file::open_for_modification.
* incremental-dump.cc (main): Likewise.
* incremental.cc (Incremental_inputs::report_command_line):
Ignore --incremental-base option when comparing command lines.
Ignore parameter when given as separate argument.
* options.h (class General_options): Add --incremental-base.
* output.cc (Output_file::Output_file):
(Output_file::open_base_file): Add base_name and writable parameters;
read base file into new file; print error message here.
(Output_file::map_no_anonymous): Add writable parameter; adjust all
callers.
* output.h (Output_file::open_for_modification): Rename to...
(Output_file::open_base_file): ...this; add base_name and
writable parameters; adjust all callers.
(Output_file::map_no_anonymous): Add writable parameter; adjust all
callers.
* testsuite/Makefile.am (incremental_test_4): Test
--incremental-base.
* testsuite/Makefile.in: Regenerate.

* testsuite/Makefile.am: Add incremental_test_2, incremental_test_3,
incremental_test_4.
* testsuite/Makefile.in: Regenerate.
* testsuite/two_file_test_1_v1.cc: New test source file.
* testsuite/two_file_test_1b_v1.cc: New test source file.
* testsuite/two_file_test_2_v1.cc: New test source file.

* dynobj.h (Dynobj::do_dynobj): New function.
* incremental-dump.cc (dump_incremental_inputs): Print as_needed
flag and soname for shared objects.
* incremental.cc (Incremental_inputs::report_object): Make
either Incremental_object_entry or Incremental_dynobj_entry; add
soname to string table.
(Incremental_inputs::report_input_section): Add assertion.
(Output_section_incremental_inputs::set_final_data_size): Adjust
type of input file entry for shared libraries; adjust size of
shared library info entry.
(Output_section_incremental_inputs::write_input_files): Write
as_needed flag for shared libraries.
(Output_section_incremental_inputs::write_info_blocks): Adjust type
of input file entry for shared libraries; write soname.
(Sized_incr_dynobj::Sized_incr_dynobj): Read as_needed flag and
soname from incremental info.
* incremental.h (enum Incremental_input_flags): Add
INCREMENTAL_INPUT_AS_NEEDED.
(Incremental_input_entry::Incremental_input_entry): Initialize new
data member.
(Incremental_input_entry::set_as_needed): New function.
(Incremental_input_entry::as_needed): New function.
(Incremental_input_entry::do_dynobj_entry): New function.
(Incremental_input_entry::as_needed_): New data member.
(Incremental_object_entry::Incremental_object_entry): Don't check
for shared library.
(Incremental_object_entry::do_type): Likewise.
(class Incremental_dynobj_entry): New class.
(Incremental_input_entry_reader::as_needed): New function.
(Incremental_input_entry_reader::get_soname): New function.
(Incremental_input_entry_reader::get_global_symbol_count): Rewrite.
(Incremental_input_entry_reader::get_output_symbol_index): Adjust
size of shared library info entry.
* layout.cc (Layout::finish_dynamic_section): Don't test for
incremental link when adding DT_NEEDED entries.
* object.h (Object::Object): Initialize new data member.
(Object::dynobj): New function.
(Object::set_as_needed): New function.
(Object::as_needed): New function.
(Object::do_dynobj): New function.
(Object::as_needed_): New data member.

* incremental-dump.cc (dump_incremental_inputs): Print dynamic reloc
info; adjust display of GOT entries.
* incremental.cc (Sized_incremental_binary::setup_readers): Allocate
vector of input objects; remove file_status_.
(Sized_incremental_binary::do_reserve_layout): Remove file_status_.
(Sized_incremental_binary::do_process_got_plt): Adjust calls to
got_plt reader; call target hooks to reserve GOT entries.
(Output_section_incremental_inputs::set_final_data_size): Adjust size
of input file info header and GOT info entry.
(Output_section_incremental_inputs::write_info_blocks): Write dynamic
relocation info.
(Got_plt_view_info::got_descriptor): Remove.
(Got_plt_view_info::sym_index): New data member.
(Got_plt_view_info::input_index): New data member.
(Local_got_offset_visitor::visit): Write input file index.
(Global_got_offset_visitor::visit): Write 0 for input file index.
(Global_symbol_visitor_got_plt::operator()): Replace got_descriptor
with sym_index and input_index.
(Output_section_incremental_inputs::write_got_plt): Adjust size of
incremental info GOT entry; replace got_descriptor with input_index.
(Sized_relobj_incr::Sized_relobj_incr): Adjust initializers; record
map from input file index to object.
(Sized_relobj_incr::do_layout): Replace direct data member reference
with accessor function.
(Sized_relobj_incr::do_for_all_local_got_entries): Move to base class.
* incremental.h (Incremental_input_entry_reader::get_symbol_offset):
Adjust size of input file info header.
(Incremental_input_entry_reader::get_first_dyn_reloc): New function.
(Incremental_input_entry_reader::get_dyn_reloc_count): New function.
(Incremental_input_entry_reader::get_input_section): Adjust size of
input file info header.
(Incremental_got_plt_reader::Incremental_got_plt_reader): Adjust size
of incremental info GOT entry.
(Incremental_got_plt_reader::get_got_desc): Remove.
(Incremental_got_plt_reader::get_got_symndx): New function.
(Incremental_got_plt_reader::get_got_input_index): New function.
(Sized_incremental_binary::Sized_incremental_binary): Remove
file_status_; add input_objects_.
(Sized_incremental_binary::~Sized_incremental_binary): Remove.
(Sized_incremental_binary::set_file_is_unchanged): Remove.
(Sized_incremental_binary::file_is_unchanged): Remove.
(Sized_incremental_binary::set_input_object): New function.
(Sized_incremental_binary::input_object): New function.
(Sized_incremental_binary::file_status_): Remove.
(Sized_incremental_binary::input_objects_): New data member.
(Sized_relobj_incr): Rename Sized_incr_relobj to this; adjust all
references.
(Sized_relobj_incr::invalid_address): Move to base class.
(Sized_relobj_incr::is_output_section_offset_invalid): Move to base
class.
(Sized_relobj_incr::do_output_section_offset): Likewise.
(Sized_relobj_incr::do_for_all_local_got_entries): Likewise.
(Sized_relobj_incr::section_offsets_): Likewise.
* object.cc (Sized_relobj::do_for_all_local_got_entries): New
function.
(Sized_relobj_file::Sized_relobj_file): Remove local_got_offsets_.
(Sized_relobj_file::layout_section): Replace refs to section_offsets_
with accessor function.
(Sized_relobj_file::do_layout): Likewise.
(Sized_relobj_file::do_layout_deferred_sections): Likewise.
(Sized_relobj_file::do_for_all_local_got_entries): Move to base class.
(Sized_relobj_file::compute_final_local_value): Replace refs to
section_offsets_ with accessor function.
(Sized_relobj_file::do_finalize_local_symbols): Likewise.
* object.h (Relobj::Relobj): Initialize new data members.
(Relobj::add_dyn_reloc): New function.
(Relobj::first_dyn_reloc): New function.
(Relobj::dyn_reloc_count): New function.
(Relobj::first_dyn_reloc_): New data member.
(Relobj::dyn_reloc_count_): New data member.
(Sized_relobj): Rename Sized_relobj_base to this; adjust all
references.
(Sized_relobj::Address): New typedef.
(Sized_relobj::invalid_address): Move here from child class.
(Sized_relobj::Sized_relobj): Initialize new data members.
(Sized_relobj::sized_relobj): New function.
(Sized_relobj::is_output_section_offset_invalid): Move here from
child class.
(Sized_relobj::get_output_section_offset): Likewise.
(Sized_relobj::local_has_got_offset): Likewise.
(Sized_relobj::local_got_offset): Likewise.
(Sized_relobj::set_local_got_offset): Likewise.
(Sized_relobj::do_for_all_local_got_entries): Likewise.
(Sized_relobj::clear_got_offsets): New function.
(Sized_relobj::section_offsets): Move here from child class.
(Sized_relobj::do_output_section_offset): Likewise.
(Sized_relobj::do_set_section_offset): Likewise.
(Sized_relobj::Local_got_offsets): Likewise.
(Sized_relobj::local_got_offsets_): Likewise.
(Sized_relobj::section_offsets_): Likewise.
(Sized_relobj_file): Rename Sized_relobj to this; adjust all
references.
(Sized_relobj_file::is_output_section_offset_invalid): Move to base
class.
(Sized_relobj_file::sized_relobj): New function
(Sized_relobj_file::local_has_got_offset): Move to base class.
(Sized_relobj_file::local_got_offset): Likewise.
(Sized_relobj_file::set_local_got_offset): Likewise.
(Sized_relobj_file::get_output_section_offset): Likewise.
(Sized_relobj_file::do_for_all_local_got_entries): Likewise.
(Sized_relobj_file::do_output_section_offset): Likewise.
(Sized_relobj_file::do_set_section_offset): Likewise.
(Sized_relobj_file::Local_got_offsets): Likewise.
(Sized_relobj_file::local_got_offsets_): Likewise.
(Sized_relobj_file::section_offsets_): Likewise.
* output.cc (Output_reloc::Output_reloc): Adjust type of relobj
(all constructors).
(set_needs_dynsym_index): Convert relobj to derived class pointer.
(Output_reloc::get_symbol_index): Likewise.
(Output_reloc::local_section_offset): Likewise.
(Output_reloc::get_address): Likewise.
(Output_reloc::symbol_value): Likewise.
(Output_data_got::reserve_slot): Move to class definition.
(Output_data_got::reserve_local): New function.
(Output_data_got::reserve_slot_for_global): Remove.
(Output_data_got::reserve_global): New function.
* output.h (Output_reloc::Output_reloc): Adjust type of relobj
(all constructors, two instantiations).
(Output_reloc::get_relobj): New function (two instantiations).
(Output_reloc::u1_.relobj, Output_reloc::u2_.relobj): Adjust type.
(Output_data_reloc_base::add): Convert relobj to derived class pointer.
(Output_data_reloc::add_global): Adjust type of relobj.
(Output_data_reloc::add_global_relative): Likewise.
(Output_data_reloc::add_symbolless_global_addend): Likewise.
(Output_data_reloc::add_local): Likewise.
(Output_data_reloc::add_local_relative): Likewise.
(Output_data_reloc::add_symbolless_local_addend): Likewise.
(Output_data_reloc::add_local_section): Likewise.
(Output_data_reloc::add_output_section): Likewise.
(Output_data_reloc::add_absolute): Likewise.
(Output_data_reloc::add_target_specific): Likewise.
(Output_data_got::reserve_slot): Move definition here.
(Output_data_got::reserve_local): New function.
(Output_data_got::reserve_global): New function.
* reloc.cc (Sized_relobj_file::do_read_relocs): Replace refs to
section_offsets_ with accessor function.
(Sized_relobj_file::write_sections): Likewise.
(Sized_relobj_file::do_relocate_sections): Likewise.
* target.h (Sized_target::reserve_local_got_entry): New function.
(Sized_target::reserve_global_got_entry): New function.
* x86_64.cc (Target_x86_64::reserve_local_got_entry): New function.
(Target_x86_64::reserve_global_got_entry): New function.
(Target_x86_64::init_got_plt_for_update): Create rela_dyn section.

PR breakpoint/12803
* gdb.cp/cmpd-minsyms.cc (a): New method.
(b): New method.
(c): New method.
* gdb.cp/cmpd-minsyms.exp: Add tests for new methods.

PR breakpoint/12803
* linespec.c (keep_name_info): Add handling for "volatile" keyword.
(decode_compound): Unconditionally call keep_name_info.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

    * config/tc-s390.c (md_gather_operands): Fix check for floating
    register pair operands.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

    * opcode/s390.h: Replace S390_OPERAND_REG_EVEN with
    S390_OPERAND_REG_PAIR.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

    * s390-opc.c: Replace S390_OPERAND_REG_EVEN with
    S390_OPERAND_REG_PAIR.  Fix INSTR_RRF_0UFEF instruction type.
    * s390-opc.txt: Fix cxr instruction type.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

    * gas/s390/esa-g5.d: Fix fp register pair operands.
    * gas/s390/esa-g5.s: Likewise.
    * gas/s390/zarch-z196.d: Likewise.
    * gas/s390/zarch-z196.s: Likewise.
    * gas/s390/zarch-z9-109.d: Likewise.
    * gas/s390/zarch-z9-109.s: Likewise.
    * gas/s390/zarch-z9-ec.d: Likewise.
    * gas/s390/zarch-z9-ec.s: Likewise.

2011-05-24  Pedro Alves  <pedro@codesourcery.com>

gdb/
* breakpoint.c (watchpoint_check): If the watchpoint went out of
scope, clear its command list.
(map_breakpoint_numbers): Don't walk the related breakpoints list
of each breakpoint.

gdb/testsuite/
* gdb.base/commands.exp (watchpoint_command_test): Check that the
watchpoint's command list didn't execute when the watchpoint went
out of scope.

* MAINTAINERS: Move Jim Blandy to past maintainers.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* config/tc-s390.c (md_gather_operands): Emit an error for odd
numbered registers used as register pair operand.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* opcode/s390.h: Add S390_OPCODE_REG_EVEN flag.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* s390-opc.c: Add new instruction types marking register pair
operands.
* s390-opc.txt: Match instructions having register pair operands
to the new instruction types.

2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* gas/s390/esa-g5.d: Fix register pair operands.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z196.d: Likewise.
* gas/s390/zarch-z196.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z900.d: Likewise.
* gas/s390/zarch-z900.s: Likewise.
* gas/s390/zarch-z990.d: Likewise.
* gas/s390/zarch-z990.s: Likewise.

2011-05-24  Tristan Gingold  <gingold@adacore.com>

* symfile.h (enum dwarf2_section_enum): New type.
(dwarf2_get_section_info): New prototype.
* dwarf2read.c (dwarf2_get_section_info): Replace parameter
section_name by sect.  Use a switch to select the info.
* dwarf2-frame.c (warf2_get_section_info): Remove prototype.
(dwarf2_build_frame_info): Adjust calls to dwarf2_get_section_info.

../commit.txt~

2011-05-24  Pedro Alves  <pedro@codesourcery.com>

gdb/
* solib-svr4.c (svr4_solib_create_inferior_hook): Skip setting
shared library event breakpoint if there's no execution.

gdb/testsuite/
* gdb.trace/tfile.exp: Add test that opening the basic.tf trace
file doesn't error, using MI.

* breakpont.c (remove_hw_watchpoints): Remove unused function.
* breakpoint.h remove_hw_watchpoints(): Remove prototype.

* ld-cris/tls-e-tpoffcomm1.d: Adjust for second PR12763 change,
setting TLS file offset.

daily update

*** empty log message ***

* gold.cc (queue_middle_tasks): Process existing GOT/PLT entries.
* incremental-dump.cc (dump_incremental_inputs): Mask high-order
bit when checking got_type.
* incremental.cc (Sized_incremental_binary::setup_readers):
Store symbol table and string table locations; initialize bit vector
of file status flags.
(Sized_incremental_binary::do_reserve_layout): Set bit flag for
unchanged files.
(Sized_incremental_binary::do_process_got_plt): New function.
(Sized_incremental_binary::get_symtab_view): Use stored locations.
(Output_section_incremental_inputs::set_final_data_size): Record
file index for each input file.
(Output_section_incremental_inputs::write_got_plt): Store file index
instead of input entry offset for each GOT entry.
* incremental.h
(Incremental_input_entry::Incremental_input_entry): Initialize new
data member.
(Incremental_input_entry::set_offset): Store file index.
(Incremental_input_entry::get_file_index): New function.
(Incremental_input_entry::file_index_): New data member.
(Incremental_binary::process_got_plt): New function.
(Incremental_binary::do_process_got_plt): New function.
(Sized_incremental_binary::Sized_incremental_binary): Initialize new
data members.
(Sized_incremental_binary::~Sized_incremental_binary): New destructor.
(Sized_incremental_binary::set_file_is_unchanged): New function.
(Sized_incremental_binary::file_is_unchanged): New function.
(Sized_incremental_binary::do_process_got_plt): New function.
(Sized_incremental_binary::file_status_): New data member.
(Sized_incremental_binary::main_symtab_loc_): New data member.
(Sized_incremental_binary::main_strtab_loc_): New data member.
* output.cc (Output_data_got::Got_entry::write): Add case
RESERVED_CODE.
(Output_data_got::add_global): Call add_got_entry.
(Output_data_got::add_global_plt): Likewise.
(Output_data_got::add_global_with_rel): Likewise.
(Output_data_got::add_global_with_rela): Likewise.
(Output_data_got::add_global_pair_with_rel): Call add_got_entry_pair.
(Output_data_got::add_global_pair_with_rela): Likewise.
(Output_data_got::add_local): Call add_got_entry.
(Output_data_got::add_local_plt): Likewise.
(Output_data_got::add_local_with_rel): Likewise.
(Output_data_got::add_local_with_rela): Likewise.
(Output_data_got::add_local_pair_with_rel): Call add_got_entry_pair.
(Output_data_got::add_local_pair_with_rela): Likewise.
(Output_data_got::reserve_slot): New function.
(Output_data_got::reserve_slot_for_global): New function.
(Output_data_got::add_got_entry): New function.
(Output_data_got::add_got_entry_pair): New function.
(Output_section::add_output_section_data): Edit FIXME.
* output.h
(Output_section_data_build::Output_section_data_build): New
constructor with size parameter.
(Output_data_space::Output_data_space): Likewise.
(Output_data_got::Output_data_got): Initialize new data member; new
constructor with size parameter.
(Output_data_got::add_constant): Call add_got_entry.
(Output_data_got::reserve_slot): New function.
(Output_data_got::reserve_slot_for_global): New function.
(class Output_data_got::Got_entry): Add RESERVED_CODE.
(Output_data_got::add_got_entry): New function.
(Output_data_got::add_got_entry_pair): New function.
(Output_data_got::free_list_): New data member.
* target.h (Sized_target::init_got_plt_for_update): New function.
(Sized_target::register_global_plt_entry): New function.
* x86_64.cc (Output_data_plt_x86_64::Output_data_plt_x86_64):
Initialize new data member; call init; add constructor with PLT count.
(Output_data_plt_x86_64::init): New function.
(Output_data_plt_x86_64::add_relocation): New function.
(Output_data_plt_x86_64::reserve_slot): New function.
(Output_data_plt_x86_64::free_list_): New data member.
(Target_x86_64::init_got_plt_for_update): New function.
(Target_x86_64::register_global_plt_entry): New function.
(Output_data_plt_x86_64::add_entry): Allocate from free list for
incremental updates.
(Output_data_plt_x86_64::add_relocation): New function.
* testsuite/object_unittest.cc (Object_test): Set default options.

sim: glue: allow bitwise devices to only glue ints

Some Blackfin parts tie a bunch of interrupt lines into a single OR
gate before feeding the result into the SIC.  The glue-or device in
the sim provides a nice way of modeling this exact behavior.  At the
moment though, it requires the device to be mapped into the address
space so that things could write to it directly.  This is not needed
for the Blackfin usage, so make it optional.  Now the glue devices
can be used to simply tie interrupt lines together.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: glue: implement or/xor funcs

The glue device has a bunch of "todos" for the misc bitwise devices.
So implement two for fun -- the glue-or and glue-xor.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

gdb
* c-lang.c (evaluate_subexp_c): Use expect_type if it is not
NULL.
gdb/testsuite
* gdb.base/charset.exp (string_display): Add tests to assign to
arrays.
* gdb.base/charset.c (short_array, int_array, long_array): New.

* elf32-rx.c (rx_elf_object_p): When reading an RX object in, undo
the vma/lma swapping done in elf32_rx_modify_program_headers.

* python/lib/gdb/printing.py (register_pretty_printer): Add missing
entry for RuntimeError to doc string.

* sparc-tdep.c (sparc_skip_stack_check): Recognize a new instruction
sequence for probing loops.

2011-05-23  Pedro Alves  <pedro@codesourcery.com>

* infrun.c (user_visible_resume_ptid): Fix typos in describing
comment.

* elf-m10300.c (mn10300_elf_mkobject): New function.
(bfd_elf32_mkobject): Define.

* config/tc-v850.h (TC_FX_SIZE_SLACK): Define.

* ld-elf/shared.exp: Revert previous delta.  Do not build
libraries in a non-native environment.

* elf-bfd.h: Comment typo fix.
* elf32-ppc.c (struct ppc_elf_dyn_relocs): Delete.  Replace with
struct elf_dyn_relocs throughout.
* elf64-ppc.c (struct ppc_dyn_relocs): Likewise.

* elf32-frv.c: Use info->callbacks->einfo throughout file in linker
functions rather than warning callback or _bfd_error_handler.
* elf32-ppc.c: Likewise.
* elf64-ppc.c: Likewise.
* elf32-ppc.c (ppc_elf_tls_optimize): Use %H in __tls_get_addr lost
arg error.
* elf64-ppc.c (ppc64_elf_tls_optimize): Likewise.

* ldmisc.c (vfinfo): Add %H.
* ldmain.c (reloc_overflow): Use %H rather than %C.
(reloc_dangerous, unattached_reloc): Likewise.

PR 12763
bfd/
* elf.c (assign_file_positions_for_load_sections): Set sh_offset for
.tbss, and page align same for all SHT_NOBITS sections.
ld/
* ldlang.c (lang_output_section_find_by_flags): Match orphan .sdata2
like sections to existing .sdata2, and similarly for orphan TLS
sections.
* emultempl/elf32.em (place_orphan): Exclude .tbss from orphan_bss.

PR 12763
* ld-elf/binutils.exp: Don't run tdata3 for hppa64.

*** empty log message ***

daily update

daily update

*** empty log message ***

* sparc-nat.c (sparc_fetch_inferior_registers): Explicitly supply
zero as the value for %g0 in the register cache.
* sparc-tdep.c (sparc32_supply_gregset): Likewise.
* sparc64-tdep.c (sparc64_supply_gregset): Likewise.

* ld-cris/tls-e-tpoffcomm1.d: Adjust for PR12763 change removing
empty program header.

daily update

*** empty log message ***

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

* infrun.c (proceed): Set previous_inferior_ptid here.
(init_wait_for_inferior): Initialize previous_inferior_ptid from
inferior_ptid, not null_ptid.
(wait_for_inferior): Don't initialize previous_inferior_ptid here.
(fetch_inferior_event): Nor here.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* inf-loop.c (inferior_event_handler): Only output a message if
verbose.

* MAINTAINERS: Update my e-mail address.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

Cope with async mode.

gdb/testsuite/
* gdb.mi/mi-break.exp (test_breakpoint_commands): Split gdb_test
into gdb_test + mi_expect_stop.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/testsuite/
* gdb.mi/basics.c: Don't include stdio.h or unistd.h.
(callme): Remove printf call.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

* infrun.c (proceed): Switch the inferior event loop to
INF_EXEC_COMPLETE if the target refused to resume from a
vfork/fork.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* infcmd.c: Include "inf-loop.h".
(step_once): When stepping into an inline subroutine, pretend the
target has run.  If the target can async, switch the inferior
event loop to INF_EXEC_COMPLETE.
* inferior.h (user_visible_resume_ptid): Declare.
* infrun.c (user_visible_resume_ptid): New function, factored out
from `resume'.
(resume): Use it.
* mi/mi-main.c (mi_execute_async_cli_command): Remove assertion
that the current thread is running.  Merge async and sync
branches.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* infcmd.c (step_1): Simplify synchronous case.

PR 12763
* ld-elf/tdata3.s: New test.
* ld-elf/tbss3.s: New test.
* ld-elf/binutils.exp: Consolidate tbss and tdata tests.

PR 12763
* elf.c (_bfd_elf_make_section_from_shdr): Set up TLS section LMAs
from PT_TLS header.
(_bfd_elf_map_sections_to_segments): Don't create a final PT_LOAD
segment if just for .tbss.
(assign_file_positions_for_load_sections): Don't report "can't
allocate in segment" errors for .tbss.
(assign_file_positions_for_non_load_sections): Don't set p_filesz
from SHT_NOBITS section filepos.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* tracepoint.c: Include exceptions.h.
(TFILE_PID): Move higher in file.
(tfile_open): Delay pushing the tfile target until we're assured
the tfile header is present in the file.  Wrap reading the initial
newline-terminated lines in TRY_CATCH.  Pop the target if the
initial setup failed.  Add the tfile's thread immediately
aftwards, before any non-essential setup.  Don't skip
post_create_inferior if there are no traceframes present in the
file.
(tfile_close): Remove redundant check for null before xfree call.
(tfile_thread_alive): New function.
(init_tfile_ops): Register it as to_thread_alive callback.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* tracepoint.c (tfile_open): Delete #if 0'd code.

* lib/gdb.exp (gdb_test_list_exact): Suggest use of double
quote pattern to avoid problems with Cygwin/mingw expect versions.
* gdb.base/default.exp (show convenience): Use double
quote pattern for regular expressions.

ld/testsuite/
* ld-tic6x/pcr-reloc.d: New test.
* ld-tic6x/pcr-reloc.s: New test.

gas/testsuite/
* gas/tic6x/pcr-relocs.d: New test.
* gas/tic6x/pcr-relocs.s: New test.
* gas/tic6x/pcr-relocs-undef.d: New test.
* gas/tic6x/pcr-relocs-undef.s: New test.
* gas/tic6x/reloc-bad-2.s: Update for pcr_offset.
* gas/tic6x/reloc-bad-2.l: Update for pcr_offset.

bfd/
* elf32-tic6x.c (elf32_tic6x_howto_table): Add entries for
R_C6000_PCR_H16 and R_C6000_PCR_L16.
(elf32_tic6x_relocate_section): Handle them.

gas/
* config/tc-tic6x.c (tic6x_operators): Add "pcr_offset".
(tic6x_parse_name): Handle it.
(tic6x_fix_new_exp): Handle O_pcr_offset.
(tic6x_fix_adjustable): Return 0 for the new relocs.
(md_apply_fix): Handle them.
(tc_gen_reloc): Likewise.
* config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member.

gdb/
Fix -readnow for -gdwarf-4 unused type units.
* dwarf2read.c (struct signatured_type): Remove the field offset.
(create_signatured_type_table_from_index): Remove its initialization.
(create_debug_types_hash_table): Likewise.  Initialize per_cu.offset
instead.  Add a complaint call.
(process_psymtab_comp_unit): Change assignment to gdb_assert.
(process_type_comp_unit, lookup_die_type, dump_die_shallow)
(lookup_signatured_type_at_offset, read_signatured_type)
(write_one_signatured_type): Update the field for per_cu.

gdb/testsuite/
Fix -readnow for -gdwarf-4 unused type units.
* gdb.dwarf2/dw4-sig-type-unused.S: New file.
* gdb.dwarf2/dw4-sig-type-unused.exp: New file.

*** empty log message ***

daily update

* python/py-inferior.c (python_inferior_exit): Use
target_gdbarch.
(python_on_resume): Likewise.

2011-05-19  Matt Rice  <ratmice@gmail.com>

        * breakpoint.c (bpstat_do_actions_1): Call prevent_dont_repeat.

2011-05-19  Hui Zhu  <teawater@gmail.com>

* tracepoint.c (tfile_trace_find): Return directly when num is -1.

* v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
operands.

2011-05-19  Hui Zhu  <teawater@gmail.com>

* xcoffread.c (read_xcoff_symtab): Initialize fcn_aux_saved.

*** empty log message ***

* dwarf2read.c (dwarf2_add_field): Constify.
* value.c (value_static_field): Constify.
* gdbtypes.h (struct main_type) <field.field_location.physname>:
Now const.
* ax-gdb.c (gen_static_field): Constify

gdb/
* linux-nat.c (kill_callback): Use SIGKILL first.

gdb/testsuite/
* gdb.base/kill-after-signal.c: New file.
* gdb.base/kill-after-signal.exp: New file.

Remove one use of sprintf in ada-lang.c (print_it_exception)

This is just a minor cleanup of an ARI violation.  As this affects
code that is normally unreachable (you'd need a runtime where
the unit providing the exception hook has been compiled without
debugging information), I tested this manually by commenting out
the code just above, thus forcing this part of the code to be
exercised.

gdb/ChangeLog:

        * ada-lang.c (print_it_exception): Avoid use of sprintf.

Tested on x86_64-linux.

PR binutils/12753
* nm.c (filter_symbols): Treat unique symbols as global symbols.
* doc/binutils.texi (nm): Mention that some lowercase letters
actually indicate global symbols.

* lib/utils-lib.exp (run_dump_test): Allow nm as a program.
* binutils-all/nm.exp: Test running "nm -g" on an object file
containing a unique symbol.

* value.c (value_fn_field): Constify.
* symtab.c (gdb_mangle_name): Constify.
* stabsread.c (update_method_name_from_physname): Make 'physname'
argument const.
* p-typeprint.c (pascal_type_print_method_args): Make arguments
const.  Use explicit fputc_filtered loop.
(pascal_type_print_base): Constify.
* p-lang.h (pascal_type_print_method_args): Update.
* linespec.c (add_matching_methods): Constify.
(add_constructors): Likewise.
* jv-typeprint.c (java_type_print_base): Constify.
* gdbtypes.h (struct cplus_struct_type)
<fn_fieldlist.fn_field.physname>: Now const.
* dwarf2read.c (compute_delayed_physnames): Constify.
(dwarf2_add_member_fn): Likewise.
* c-typeprint.c (c_type_print_base): Constify.  Use cleanups.

* gas/arm/req.l: Updated expected warning message.

2011-05-18  Pedro Alves  <pedro@codesourcery.com>

gdb/
* infrun.c (resume): Mention which is the current thread, and its
current PC in debug output.
(prepare_to_proceed): Mention the thread switching in debug
output.

* linux-thread-db.c (try_thread_db_load_from_pdir_1): Fix absolute
path check.  Use xmalloc and cleanups.
(try_thread_db_load_from_dir): Use xmalloc and cleanups.

PR ld/12761
* elflink.c (elf_link_add_object_symbols): Process .gnu.warning
sections when building shared libraries.

* lib/ld-lib.exp (run_cc_link_tests): Add an optional 8th
parameter - an expected warning message from the linker.
* ld-elf/shared.exp (build_tests): Expect a warning message when
building the libbarw.so library.

* ld-elf/shared.exp: Run library building tests even when not
building a native toolchain.

PR gas/12754
* config/tc-tic30.c (ordinal_names): Allow translation of the
ordinal names.

PR ld/12778
* elf32-arm.c (elf32_arm_gc_sweep_hook): Use the computed dynamic
reloc pointer.

* config/tc-arm.c (s_unreq): Reword warning message to make it
easier to translate.
* config/tc-ia64.c (md_show_usage): Add note for translators.
* configure.in (ALL_LINGUAS): Add "fi".
* configure: Regenerate.

2011-05-18  Tristan Gingold  <gingold@adacore.com>

* xcofflink.c (xcoff_link_add_symbols): Handle C_DWARF symbols.
(xcoff_sweep): Always keep dwarf sections.
(xcoff_link_input_bfd): Handle dwarf symbols and sections.

bfd
2011-05-18  Tristan Gingold  <gingold@adacore.com>

* libxcoff.h (struct xcoff_dwsect_name): New type.
(XCOFF_DWSECT_NBR_NAMES): New macro.
(xcoff_dwsect_names): Declare.
* coffcode.h (sec_to_styp_flags): Handle xcoff dwarf sections.
(styp_to_sec_flags): Ditto.
(coff_new_section_hook): Ditto.
(coff_slurp_symbol_table): Handle C_DWARF and C_INFO.
* coff-rs6000.c (xcoff_dwsect_name): New variable.

gas
2011-05-18  Tristan Gingold  <gingold@adacore.com>

* config/tc-ppc.h (ppc_tc_sy): Reorder fields.
Put size into an union with dw.
(OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust.
(ppc_xcoff_end): Declare.
(md_end): Define.
* config/tc-ppc.c: Add includes for xcoff.
(ppc_dwsect): New function.
(md_pseudo_table): Add dwsect.
(struct dw_subsection): New.
(dw_sections): New.
(ppc_change_debug_section): New function.
(ppc_xcoff_end): Ditto.
(ppc_function): Adjust for ppc_tc_sy.
(ppc_symbol_new_hook): Ditto.
(ppc_frob_symbol): Ditto.
(ppc_frob_section): Do not set vma for debug sections.
(ppc_fix_adjustable): Return true for debug sections.
* config/obj-coff.c: Add includes for xcoff.
(coff_frob_section): Handle dwarf section.

gas/testsuite
2011-05-18  Tristan Gingold  <gingold@adacore.com>

* gas/ppc/xcoff-dwsect-1-32.d: New test.
* gas/ppc/xcoff-dwsect-1-64.d: Ditto.
* gas/ppc/xcoff-dwsect-1.s: New file.
* gas/ppc/aix.exp (do_align_test): Add tests.