2009-07-03  Cary Coutant  <ccoutant@google.com>

* dwarf2.c (decode_line_info): Ignore DW_LNE_set_discriminator.

2009-07-03  Dave Korn  <dave.korn.cygwin@gmail.com>

* coffcode.h (sec_to_styp_flags):  Partially revert (functional
changes only) earlier patch:-

  2009-06-25  Kai Tietz  <kai.tietz@onevision.com>

  * coffcode.h (sec_to_styp_flags): Set discardable for .reloc and
  give .debug and .reloc data characteristics.
  (DOT_RELOC): New define for .reloc section string.
  (coff_write_object_contents): Use DOT_RELOC instead of string.

2009-06-29  Tristan Gingold  <gingold@adacore.com>

* i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
(amd64_darwin_thread_state_num_regs)
(amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
amd64-darwin-tdep.c
(_initialize_i386_darwin_tdep): Remove 64 bits parts.
(darwin_dwarf_signal_frame_p): Make public.
* amd64-darwin-tdep.c: New file with most chunks from
i386-darwin-tdep.c
* i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
(amd64_darwin_thread_state_reg_offset)
(amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
* amd64-darwin-tdep.h: New file.
* i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
if BFD64 is defined.
(i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
64 bits parts.
(i386_darwin_store_inferior_registers): Ditto.
(darwin_set_sstep): Ditto.
(darwin_complete_target): Ditto.
(amd64_darwin_sstep_at_sigreturn): Ditto.
* configure.tgt: Create a separate entry for x86_64-*-darwin.
Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
* Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
i386-darwin-tdep.c i386-darwin-nat.c
(ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o

2009-07-03  Tristan Gingold  <gingold@adacore.com>

* scripttempl/pep.sc: Put .eh_frame in its own section.
* scripttempl/pe.sc: Ditto.

* dwarf2.h (enum dwarf_location_atom): Add DW_OP_implicit_value
and DW_OP_stack_value.

* dwarf.c (decode_location_expression): Handle DW_OP_stack_value
and DW_OP_implicit_value.

daily update

*** empty log message ***

* linux-fork.c (forks_exist_p): Drop unnecessary extern.
(add_fork, linux_fork_killall, linux_fork_mourn_inferior)
(linux_fork_detach): Ditto.
(delete_fork_command): Rename to ...
(delete_checkpoint_command): ... this.
(detach_fork_command): Rename to ...
(detach_checkpoint_command): ... this.
(info_forks_command): Rename to ...
(info_checkpoints_command): ... this.
(_initialize_linux_fork): Remove stale comments.  Adjust.

gdb/
2009-07-02  Pedro Alves  <pedro@codesourcery.com>

* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it.  Don't handle
checkpoints here.  Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior.  Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list.  Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior.  Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here.  Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static.  Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise.  Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork.  Don't remove
breakpoints, that's a nop.  Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.

* NEWS: Mention multi-inferior debugging.  Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.

gdb/testsuite/
2009-07-02  Pedro Alves  <pedro@codesourcery.com>

* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux.  Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.

gdb/doc/
2009-07-02  Pedro Alves  <pedro@codesourcery.com>

* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands.  Delete mention of "detach fork" and
"delete fork".  Cross reference to "Debugging multiple inferiors"
section.

* gdbarch.sh (current_gdbarch): Remove global variable.
(find_arch_by_info): Remove, inline into ...
(gdbarch_find_by_info): ... this.  Remove current_gdbarch swapping.
(deprecated_current_gdbarch_select_hack): Rename to ...
(deprecated_target_gdbarch_select_hack): ... this.  Do not set
or access current_gdbarch.
* gdbarch.c, gdbarch.h: Regenerate.

* arch-utils.c (gdbarch_update_p): Update call.
(set_gdbarch_from_file): Likewise.

* defs.h (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter.  Use it
instead of current_gdbarch.

* gdbcore.h (read_memory_integer, safe_read_memory_integer,
read_memory_unsigned_integer, write_memory_signed_integer,
write_memory_unsigned_integer): Add BYTE_ORDER parameter.
* corefile.c (struct captured_read_memory_integer_arguments): Add
BYTE_ORDER member.
(safe_read_memory_integer): Add BYTE_ORDER parameter.  Store it into
struct captured_read_memory_integer_arguments.
(do_captured_read_memory_integer): Pass it to read_memory_integer.
(read_memory_integer): Add BYTE_ORDER parameter.  Pass it to
extract_signed_integer.
(read_memory_unsigned_integer): Add BYTE_ORDER parameter.  Pass it to
extract_unsigned_integer.
(write_memory_signed_integer): Add BYTE_ORDER parameter.  Pass it
to store_signed_integer.
(write_memory_unsigned_integer): Add BYTE_ORDER parameter.  Pass it
to store_unsigned_integer.

* target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
* target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
Pass it to extract_unsigned_integer.

Update calls to extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer, read_memory_integer,
read_memory_unsigned_integer, safe_read_memory_integer,
write_memory_signed_integer, write_memory_unsigned_integer, and
get_target_memory_unsigned to pass byte order:
* ada-lang.c (ada_value_binop): Update.
* ada-valprint.c (char_at): Update.
* alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
* alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
alpha_extract_return_value, alpha_read_insn,
alpha_get_longjmp_target): Update.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
* amd64obsd-tdep.c (amd64obsd_supply_uthread,
amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
* amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
amd64_displaced_step_fixup): Update.
* arm-linux-tdep.c (arm_linux_sigreturn_init,
arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
* arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
arm_return_value): Update.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
* auxv.c (default_auxv_parse): Update.
* avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
avr_scan_prologue, avr_extract_return_value,
avr_frame_prev_register, avr_push_dummy_call): Update.
* bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
bsd_uthread_wait, bsd_uthread_thread_alive,
bsd_uthread_extra_thread_info): Update.
* c-lang.c (c_printstr, print_wchar): Update.
* cp-valprint.c (cp_print_class_member): Update.
* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
cris_extract_return_value, find_step_target, dip_prefix,
sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
move_mem_to_reg_movem_op, get_data_from_address): Update.
* dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
* dwarf2-frame.c (execute_cfa_program): Update.
* dwarf2loc.c (find_location_expression): Update.
* dwarf2read.c (dwarf2_const_value): Update.
* expprint.c (print_subexp_standard): Update.
* findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
unsigned_address_to_pointer, address_to_signed_pointer,
read_var_value): Update.
* frame.c (frame_unwind_register_signed,
frame_unwind_register_unsigned, get_frame_memory_signed,
get_frame_memory_unsigned): Update.
* frame-unwind.c (frame_unwind_got_constant): Update.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Update.
* frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
frv_extract_return_value, find_func_descr,
frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
* f-valprint.c (f_val_print): Update.
* gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
Update.
* h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
h8300_push_dummy_call, h8300_extract_return_value,
h8300h_extract_return_value, h8300_store_return_value,
h8300h_store_return_value): Update.
* hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
Update.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
hppa64_hpux_in_solib_call_trampoline,
hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
hppa_hpux_sigtramp_frame_unwind_cache,
hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
hppa32_hpux_search_dummy_call_sequence,
hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
hppa_hpux_unwind_adjust_stub): Update.
* hppa-linux-tdep.c (insns_match_pattern,
hppa_linux_find_global_pointer): Update.
* hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
hppa_pseudo_register_read, hppa_frame_prev_register_helper,
hppa_match_insns): Update.
* hpux-thread.c (hpux_thread_fetch_registers): Update.
* i386-tdep.c (i386bsd_sigcontext_addr): Update.
* i386-cygwin-tdep.c (core_process_module_section): Update.
* i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
amd64_darwin_sstep_at_sigreturn): Update.
* i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
amd64_darwin_sigcontext_addr): Likewise.
* i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
* i386obsd-nat.c (i386obsd_supply_pcb): Update.
* i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
i386obsd_trapframe_cache): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
i386_analyze_frame_setup, i386_analyze_prologue,
i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
i386_get_longjmp_target, i386_push_dummy_call,
i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
i386_fetch_pointer_argument): Update.
* i387-tdep.c (i387_supply_fsave): Update.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
ia64_libunwind_frame_prev_register,
ia64_libunwind_sigtramp_frame_this_id,
ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
find_extant_func_descr, find_func_descr,
ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
ia64_unwind_pc): Update.
* iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
iq2000_scan_prologue, iq2000_extract_return_value,
iq2000_push_dummy_call): Update.
* irix5nat.c (fill_gregset): Update.
* jv-lang.c (evaluate_subexp_java): Update.
* jv-valprint.c (java_value_print): Update.
* lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
lm32_extract_return_value, lm32_store_return_value): Update.
* m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
m32c_m16c_pointer_to_address): Update.
* m32r-tdep.c (m32r_store_return_value, decode_prologue,
m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
Update.
* m68hc11-tdep.c (m68hc11_pseudo_register_read,
m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
m68hc11_push_dummy_call): Update.
* m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
Update.
* m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
m68k_get_longjmp_target): Update.
* m88k-tdep.c (m88k_fetch_instruction): Update.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
* mi/mi-main.c (mi_cmd_data_write_memory): Update.
* mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
mips64_linux_get_longjmp_target, mips64_fill_gregset,
mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
* mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
* mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
mips_o32_push_dummy_call, mips_o64_push_dummy_call,
mips_single_step_through_delay, mips_skip_pic_trampoline_code,
mips_integer_to_address): Update.
* mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
Update.
* monitor.c (monitor_supply_register, monitor_write_memory,
monitor_read_memory_single): Update.
* moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
moxie_analyze_prologue): Update.
* mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
mt_push_dummy_call): Update.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class, find_implementation_from_class): Update.
* ppc64-linux-tdep.c (ppc64_desc_entry_point,
ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
Update.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
ppcobsd_sigtramp_frame_cache): Update.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
ppc64_sysv_abi_return_value): Update.
* ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
* procfs.c (procfs_auxv_parse): Update.
* p-valprint.c (pascal_val_print): Update.
* regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
regcache_raw_write_signed, regcache_raw_write_unsigned,
regcache_cooked_read_signed, regcache_cooked_read_unsigned,
regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
* remote-m32r-sdi.c (m32r_fetch_register): Update.
* remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
Update.
* rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
rs6000_convert_from_func_ptr_addr, branch_dest,
rs6000_software_single_step): Update.
* rs6000-tdep.c (rs6000_in_function_epilogue_p,
ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
rs6000_frame_cache): Update.
* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
* scm-exp.c (scm_lreadr): Update.
* scm-lang.c (scm_get_field, scm_unpack): Update.
* scm-valprint.c (scm_val_print): Update.
* score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
score_fetch_inst): Update.
* sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
sh64_pseudo_register_read, sh64_pseudo_register_write,
sh64_frame_prev_register): Update:
* sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
* solib-darwin.c (darwin_load_image_infos): Update.
* solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
find_canonical_descriptor_in_load_object): Update.
* solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
irix_open_symbol_file_object): Update.
* solib-som.c (som_solib_create_inferior_hook, link_map_start,
som_current_sos, som_open_symbol_file_object): Update.
* solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
Update.
* solib-svr4.c (read_program_header, scan_dyntag_auxv,
solib_svr4_r_ldsomap): Update.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
* sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
sparc64obsd_collect_uthread): Update.
* sparc64-tdep.c (sparc64_pseudo_register_read,
sparc64_pseudo_register_write, sparc64_supply_gregset,
sparc64_collect_gregset): Update.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
* sparcobsd-tdep.c (sparc32obsd_supply_uthread,
sparc32obsd_collect_uthread): Update.
* sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
sparc_collect_rwindow): Update.
* spu-linux-nat.c (parse_spufs_run): Update.
* spu-tdep.c (spu_pseudo_register_read_spu,
spu_pseudo_register_write_spu, spu_pointer_to_address,
spu_analyze_prologue, spu_in_function_epilogue_p,
spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
info_spu_dma_command, info_spu_proxydma_command): Update.
* stack.c (print_frame_nameless_args, frame_info): Update.
* symfile.c (read_target_long_array, simple_read_overlay_table,
simple_read_overlay_region_table): Update.
* target.c (debug_print_register): Update.
* tramp-frame.c (tramp_frame_start): Update.
* v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
v850_extract_return_value, v850_store_return_value,
* valarith.c (value_binop, value_bit_index): Update.
* valops.c (value_cast): Update.
* valprint.c (val_print_type_code_int, val_print_string,
read_string): Update.
* value.c (unpack_long, unpack_double, unpack_field_as_long,
modify_field, pack_long): Update.
* vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
vax_skip_prologue): Update.
* xstormy16-tdep.c (xstormy16_push_dummy_call,
xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
* xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
xtensa_pseudo_register_write, xtensa_frame_cache,
xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.

* dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
BYTE_ORDER parameter.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
* dfp.c (match_endianness): Add BYTE_ORDER parameter.  Use it
instead of current_gdbarch.
(decimal_to_string, decimal_from_integral, decimal_from_floating,
decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
Pass it to match_endianness.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters.  Pass them to match_endianness.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
Pass them to match_endianness.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
Pass them to match_endianness.
* valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
BYTE_ORDER_Y output parameters.
(value_binop): Update call to value_args_as_decimal.

Update calls to decimal_to_string, decimal_from_string,
decimal_from_integral, decimal_from_floating, decimal_to_doublest,
decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
to pass/receive byte order:
* c-exp.y (parse_number): Update.
* printcmd.c (printf_command): Update.
* valarith.c (value_args_as_decimal, value_binop, value_logical_not,
value_equal, value_less): Update.
* valops.c (value_cast, value_one): Update.
* valprint.c (print_decimal_floating): Update.
* value.c (unpack_long, unpack_double): Update.
* python/python-value.c (valpy_nonzero): Update.

* ada-valprint.c (char_at): Add BYTE_ORDER parameter.
(printstr): Update calls to char_at.
(ada_val_print_array): Likewise.
* valprint.c (read_string): Add BYTE_ORDER parameter.
(val_print_string): Update call to read_string.
* c-lang.c (c_get_string): Likewise.
* charset.h (target_wide_charset): Add BYTE_ORDER parameter.
* charset.c (target_wide_charset): Add BYTE_ORDER parameter.
Use it instead of current_gdbarch.
* printcmd.c (printf_command): Update calls to target_wide_charset.
* c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
Pass to target_wide_charset.  Use it instead of current_gdbarch.
(classify_type): Add BYTE_ORDER parameter.  Pass to
charset_for_string_type.  Allow NULL encoding pointer.
(print_wchar): Add BYTE_ORDER parameter.
(c_emit_char): Update calls to classify_type and print_wchar.
(c_printchar, c_printstr): Likewise.

* gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
parameter.
* arch-utils.c (generic_in_solib_return_trampoline): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
(rs6000_skip_trampoline_code): Update call.

* alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
(alpha_read_insn): Add GDBARCH parameter.
* alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
(alpha_register_to_value): Pass architecture to alpha_sts.
(alpha_extract_return_value): Likewise.
(alpha_value_to_register): Pass architecture to alpha_lds.
(alpha_store_return_value): Likewise.
(alpha_read_insn): Add GDBARCH parameter.
(alpha_skip_prologue): Pass architecture to alpha_read_insn.
(alpha_heuristic_proc_start): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_next_pc): Likewise.
(alpha_sigtramp_frame_this_id): Pass architecture to
tdep->dynamic_sigtramp_offset callback.
(alpha_sigtramp_frame_sniffer): Pass architecture to
tdep->pc_in_sigtramp callback.
* alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
(alphafbsd_sigtramp_offset): Likewise.
* alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
parameter.  Pass to alpha_read_insn.
(alpha_linux_sigtramp_offset): Add GDBARCH parameter.  Pass to
alpha_linux_sigtramp_offset_1.
(alpha_linux_pc_in_sigtramp): Add GDBARCH parameter.  Pass to
alpha_linux_sigtramp_offset.
(alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
and alpha_linux_sigtramp_offset.
* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
(alphanbsd_pc_in_sigtramp): Add GDBARCH parameter.  Pass to
alphanbsd_sigtramp_offset.
* alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
(alphaobsd_pc_in_sigtramp): Add GDBARCH parameter.  Pass to
alpha_read_insn.
(alphaobsd_sigcontext_addr): Pass architecture to
alphaobsd_sigtramp_offset.
* alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
parameter.

* amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
(amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
(amd64_frame_cache): Likewise.

* arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
(thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
* arm-wince-tdep.c: Include "frame.h".

* avr-tdep.c (EXTRACT_INSN): Remove.
(avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
(avr_skip_prologue): Pass architecture to avr_scan_prologue.
(avr_frame_unwind_cache): Likewise.

* cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
(find_step_target): Initialize it.
(get_data_from_address): Add BYTE_ORDER parameter.
(bdap_prefix): Pass byte order to get_data_from_address.
(handle_prefix_assign_mode_for_aritm_op): Likewise.
(three_operand_add_sub_cmp_and_or_op): Likewise.
(handle_inc_and_index_mode_for_aritm_op): Likewise.

* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
(frv_linux_sigcontext_reg_addr): Pass architecture to
frv_linux_pc_in_sigtramp.
(frv_linux_sigtramp_frame_sniffer): Likewise.

* h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
(h8300_analyze_prologue): Add GDBARCH parameter.  Pass to
h8300_is_argument_spill.
(h8300_frame_cache, h8300_skip_prologue): Pass architecture
to h8300_analyze_prologue.

* hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
in_solib_call_trampoline callback.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter.
* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
parameter.
(hppa64_push_dummy_call): Pass architecture to
hppa64_convert_code_addr_to_fptr.
(hppa_match_insns): Add GDBARCH parameter.
(hppa_match_insns_relaxed): Add GDBARCH parameter.  Pass to
hppa_match_insns.
(hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter.  Pass to
hppa_match_insns_relaxed.
(hppa_stub_unwind_sniffer): Pass architecture to
tdep->in_solib_call_trampoline callback.
* hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
(hppa32_hpux_search_dummy_call_sequence): Pass architecture to
hppa_hpux_search_pattern.
* hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
(hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
Pass to insns_match_pattern.
(hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
hppa_linux_sigtramp_find_sigcontext.
(hppa_linux_sigtramp_frame_sniffer): Likewise.
(hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
(hppa64_hpux_in_solib_call_trampoline): Likewise.

* i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
(i386_analyze_frame_setup): Add GDBARCH parameter.
(i386_analyze_prologue): Add GDBARCH parameter.  Pass to
i386_follow_jump and i386_analyze_frame_setup.
(i386_skip_prologue): Pass architecture to i386_analyze_prologue
and i386_follow_jump.
(i386_frame_cache): Pass architecture to i386_analyze_prologue.
(i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
frame to i386_pe_skip_trampoline_code.

* ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
to sigcontext_register_address callback.
* ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
(ia64_find_unwind_table): Pass architecture to
ia64_find_global_pointer.
(find_extant_func_descr): Add GDBARCH parameter.
(find_func_descr): Pass architecture to find_extant_func_descr
and ia64_find_global_pointer.
(ia64_sigtramp_frame_init_saved_regs): Pass architecture to
tdep->sigcontext_register_address callback.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
GDBARCH parameter.

* iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
(iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.

* lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
(lm32_skip_prologue, lm32_frame_cache): Pass architecture to
lm32_analyze_prologue.

* m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
(m32r_skip_prologue): Pass architecture to decode_prologue.

* m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
(m68hc11_scan_prologue): Pass architecture to
m68hc11_analyze_instruction.

* m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
(m68k_analyze_prologue): Pass architecture to
m68k_analyze_frame_setup.

* m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
(m88k_analyze_prologue): Add GDBARCH parameter.  Pass byte order
to m88k_fetch_instruction.
(m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
(m88k_frame_cache): Likewise.

* mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
(mep_analyze_prologue): Pass architecture to mep_get_insn.

* mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
(mips32_next_pc): Pass architecture to mips_fetch_instruction.
(deal_with_atomic_sequence): Likewise.
(unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
(mips16_scan_prologue): Likewise.
(mips32_scan_prologue): Likewise.
(mips16_in_function_epilogue_p): Likewise.
(mips32_in_function_epilogue_p): Likewise.
(mips_about_to_return): Likewise.
(mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
(mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
(mips_skip_prologue): Pass architecture to mips16_scan_prologue
and mips32_scan_prologue.
(mips_in_function_epilogue_p): Pass architecture to
mips16_in_function_epilogue_p and
mips32_in_function_epilogue_p.
(heuristic_proc_start): Pass architecture to mips_fetch_instruction
and mips_about_to_return.
(mips_skip_mips16_trampoline_code): Pass architecture to
mips_fetch_instruction.
(fetch_mips_16): Add GDBARCH parameter.
(mips16_next_pc): Pass architecture to fetch_mips_16.
(extended_mips16_next_pc): Pass architecture to unpack_mips16 and
fetch_mips_16.

* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class): Add GDBARCH parameter.
(find_implementation_from_class): Add GDBARCH parameter, pass
to read_objc_class, read_objc_methlist_nmethods, and
read_objc_methlist_method.
(find_implementation): Add GDBARCH parameter, pass to
read_objc_object and find_implementation_from_class.
(resolve_msgsend, resolve_msgsend_stret): Pass architecture
to find_implementation.
(resolve_msgsend_super, resolve_msgsend_super_stret): Pass
architecture to read_objc_super and find_implementation_from_class.

* ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
ppc64_standard_linkage3_target): Pass architecture to
ppc64_desc_entry_point.
* rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
(skip_prologue): Pass byte order to bl_to_blrl_insn_p.
(rs6000_fetch_instruction): Add GDBARCH parameter.
(rs6000_skip_stack_check): Add GDBARCH parameter, pass to
rs6000_fetch_instruction.
(skip_prologue): Pass architecture to rs6000_fetch_instruction.

* remote-mips.c (mips_store_word): Return old_contents as host
integer value instead of target bytes.

* s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
(s390_analyze_prologue): Initialize it.
(extend_simple_arg): Add GDBARCH parameter.
(s390_push_dummy_call): Pass architecture to extend_simple_arg.

* scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
* scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
(SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
* scm-valprint.c (scm_scmval_print): Likewise.
(scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
SCM_BYTE_ORDER.

* sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
(sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
look_for_args_moves.
(sh64_skip_prologue): Pass architecture to
sh64_skip_prologue_hard_way.
* sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
(sh_skip_prologue): Pass architecture to sh_analyze_prologue.
(sh_frame_cache): Likewise.

* solib-irix.c (extract_mips_address): Add GDBARCH parameter.
(fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
Pass architecture to extract_mips_address.

* sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
* sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
(sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
to sparc_fetch_wcookie.
(sparc32_frame_prev_register): Likewise.
* sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
* sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.

* spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
(spu_skip_prologue): Pass architecture to spu_analyze_prologue.
(spu_virtual_frame_pointer): Likewise.
(spu_frame_unwind_cache): Likewise.
(info_spu_mailbox_list): Add BYTE_ORER parameter.
(info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
(info_spu_dma_cmdlist): Add BYTE_ORER parameter.
(info_spu_dma_command, info_spu_proxydma_command): Pass byte order
to info_spu_dma_cmdlist.

* symfile.c (read_target_long_array): Add GDBARCH parameter.
(simple_read_overlay_table, simple_read_overlay_region_table,
simple_overlay_update_1): Pass architecture to read_target_long_array.

* v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
(v850_frame_cache): Pass architecture to v850_analyze_prologue.

* xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
parameter.
(xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
to xstormy16_analyze_prologue.
(xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
(xstormy16_find_jmp_table_entry): Likewise.
(xstormy16_skip_trampoline_code): Pass architecture to
xstormy16_resolve_jmp_table_entry.
(xstormy16_pointer_to_address): Likewise.
(xstormy16_address_to_pointer): Pass architecture to
xstormy16_find_jmp_table_entry.

* xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
(call0_analyze_prologue): Add GDBARCH parameter, pass to
call0_track_op.
(call0_frame_cache): Pass architecture to call0_analyze_prologue.
(xtensa_skip_prologue): Likewise.

* defs.h (strlen_paddr, paddr, paddr_nz): Remove.
(paddress): Add GDBARCH parameter.
* utils.c (strlen_paddr, paddr, paddr_nz): Remove.
(paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
* ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
* ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
use it instead of current_gdbarch.

Update calls to ui_out_field_core_addr to pass architecture:
* ada-lang.c (print_one_exception): Update.
* breakpoint.c (print_one_breakpoint_location,
print_one_exception_catchpoint): Update.
* disasm.c (dump_insns): Update.
* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
* mi/mi-main.c (mi_cmd_data_read_memory): Update.
* mi/mi-symbol-cmds.c: Include "objfiles.h".
(mi_cmd_symbol_list_lines): Update.
* stack.c (print_frame_info, print_frame): Update.

Update callers of paddress to pass architecture:
* ada-tasks.c (info_task): Update.
* ada-valprint.c (ada_val_print_1): Update.
* annotate.c (annotate_source, annotate_frame_begin): Update.
* breakpoint.c (insert_bp_location, describe_other_breakpoints,
mention): Update.
* cli/cli-cmds.c (edit_command, list_command, print_disassembly):
Update.
* corefile.c (memory_error): Update.
* c-valprint.c (print_function_pointer_address, c_val_print): Update.
* disasm.c (dis_asm_print_address): Update.
* exec.c (print_section_info): Update.
* f-valprint.c (f_val_print): Update.
* infcmd.c: Include "arch-utils.h".
(jump_command, program_info): Update.
* linux-fork.c: Include "arch-utils.h".
(info_forks_command): Update.
* m2-valprint.c (print_function_pointer_address,
print_unpacked_pointer, print_variable_at_address,
m2_val_print): Update.
* m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
Update.
* printcmd.c (print_address, print_address_demangle, address_info):
Update.
* p-valprint.c (pascal_val_print): Update.
* source.c: Include "arch-utils.h".
(line_info): Update.
* stack.c (frame_info, print_block_frame_labels): Update.
* symfile.c (add_symbol_file_command, list_overlays_command): Update.
* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
print_symbol, print_partial_symbols, maintenance_info_psymtabs,
maintenance_check_symtabs): Update.
* symtab.c (find_pc_sect_symtab): Update.
* target.c (deprecated_debug_xfer_memory): Update.
* tracepoint.c (scope_info): Update.
* tui/tui-stack.c (tui_make_status_line): Update.
* valprint.c (val_print_string): Update.

Update callers of paddr_nz to use paddress instead (keeping
user-visible output identical):
* alpha-tdep.c (alpha_heuristic_proc_start): Update.
* amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
amd64_displaced_step_fixup): Update.
* arch-utils.c (simple_displaced_step_copy_insn): Update.
* auxv.c (fprint_target_auxv): Update.
* breakpoint.c (insert_single_step_breakpoint): Update.
* buildsym.c (finish_block): Update.
* cli/cli-dump.c (restore_section_callback): Update.
* fbsd-nat.c (fbsd_find_memory_regions): Update.
* frame.c (frame_unwind_register_value): Update.
* gcore.c (gcore_create_callback): Update.
* hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
i386_record_lea_modrm_addr, i386_record_lea_modrm,
i386_process_record): Update.
* ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
* infrun.c (displaced_step_prepare, displaced_step_fixup,
handle_inferior_event, insert_step_resume_breakpoint_at_sal,
insert_longjmp_resume_breakpoint): Update.
* linux-nat.c (linux_nat_find_memory_regions): Update.
* linux-record.c (record_linux_system_call): Update.
* mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
mips_o64_push_dummy_call): Update.
* monitor.c (monitor_error, monitor_remove_breakpoint): Update.
* record.c (record_arch_list_add_mem, record_wait,
record_xfer_partial): Update.
* remote-mips.c (mips_fetch_word, mips_check_lsi_error,
mips_common_breakpoint): Update.
* remote-sim.c (gdbsim_xfer_inferior_memory): Update.
* rs6000-tdep.c (ppc_displaced_step_fixup): Update.
* solib-som.c (som_current_sos): Update.
* symfile.c (load_progress, generic_load): Update.
* symfile-mem.c (add_vsyscall_page): Update.
* valops.c (value_fetch_lazy): Update.
* windows-tdep.c (windows_xfer_shared_library): Update.

Update callers of paddr_nz to use paddress instead (changing
user-visible output to make it more correct):
* dwarf2loc.c (locexpr_describe_location): Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint,
ia64_memory_remove_breakpoint): Update.
* jv-valprint.c (java_value_print): Update.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
* monitor.c (monitor_read_memory): Update.

Update callers of paddr to use paddress instead (changing
user-visible output to make it more correct):
* arm-tdep.c (arm_push_dummy_call): Update.
* breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
create_breakpoint): Update.
* darwin-nat-info.c (darwin_debug_regions): Update.
* dcache.c (dcache_info): Update.
* dsrec.c (load_srec, make_srec): Update.
* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
dwarf2_frame_cache): Update.
* gcore.c (gcore_copy_callback): Update.
* gnu-nat.c (gnu_xfer_memory): Update.
* mips-linux-nat.c (mips_show_dr): Update.
* monitor.c (monitor_write_memory, monitor_insert_breakpoint,
monitor_remove_breakpoint): Update.
* remote.c (compare_sections_command): Update.
* remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
m32r_remove_breakpoint, m32r_insert_watchpoint,
m32r_remove_watchpoint): Update.
* sol-thread.c (info_cb): Update.
* symfile.c (load_progress): Update.

Update callers of paddress or paddr_nz to use hex_string instead
(changes output of internal/error/debug messages only):
* dwarf2read.c (dump_die_shallow): Update.
* frame.c (fprint_field, fprint_frame, frame_pc_unwind,
get_frame_func, create_new_frame): Update.
* hppa-tdep.c (find_unwind_entry, unwind_command): Update.
* ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
ia64_get_dyn_info_list): Update.
* maint.c (maintenance_translate_address): Update.
* mi/mi-cmd-var.c (mi_cmd_var_create): Update.
* target.c (target_flash_erase): Update.

Update callers of paddr/paddr_nz to use phex/phex_nz instead,
using an appropriate address size.  Remove use of strlen_paddr.
* exec.c (exec_files_info): Update.
* i386-nat.c (i386_show_dr): Update.
* remote.c (remote_flash_erase): Update.
* m32r-rom.c (m32r_load_section): Update.
* monitor.c (monitor_vsprintf, monitor_store_register): Update.
* remote.c (remote_check_symbols, remote_search_memory): Update.
* remote-mips.c (mips_request, mips_common_breakpoint): Update.
* scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
sh_dsp_show_regs): Update.
* xcoffsolib.c (sharedlibrary_command): Update.

* maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
Use hex_string_custom instead of paddr.
(print_bfd_section_info): Pass address size.
(print_objfile_section_info): Likewise.

* annotate.h (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* annotate.c (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* source.c (identify_source_line): Update call to annotate_source.
* stack.c (print_frame_info, print_frame): Update call to
annotate_frame_begin.

* breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
(create_breakpoint, create_ada_exception_breakpoint): Update call.

* stack.c (print_block_frame_labels): Add GDBARCH parameter.
(print_frame_label_vars): Update call.

* symmisc.c (print_partial_symbols): Add GDBARCH parameter.
(dump_psymtab): Update call to print_partial_symbols.
(struct print_symbol_args): Add GDBARCH member.
(dump_symtab_1): Set print_symbol_args architecture member.
(print_symbol): Use it.

* windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
parameter.
* windows-tdep.c (windows_xfer_shared_library): Likewise.
* i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
(core_process_module_section): Pass architecture from cpms_data to
windows_xfer_shared_library.
(windows_core_xfer_shared_libraries): Initialize cmps_data
architecture member.
* windows-nat.c (windows_xfer_shared_libraries): Pass architecture
to windows_xfer_shared_library.

* defs.h (print_address): Add GDBARCH parameter.
* printcmd.c (print_address): Add GDBARCH parameter.
(print_scalar_formatted, do_examine): Update call.
* findcmd.c (find_command): Update call.
* tracepoint.c: Include "arch-utils.h".
(trace_find_line_command): Update call.
* tui/tui-disasm.c (tui_disassemble): Update call.

* value.h (print_address_demangle): Add GDBARCH parameter.
* printcmd.c (print_address_demangle): Add GDBARCH parameter.
* c-valprint.c (print_function_pointer_address, c_val_print):
Update call.
* f-valprint.c (f_val_print): Update call.
* gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
* jv-valprint.c (java_val_print): Update call.
* m2-valprint.c (print_function_pointer_address, m2_val_print):
Update call.
* p-valprint.c (pascal_val_print): Update call.

* disasm.c (gdb_disassemble_info): Install architecture into
di.application_data field.

testsuite/ChangeLog:

* gdb.threads/tls-shared.exp: Update to locexpr_describe_location
change to prefix TLS offset in hex with 0x.

doc/ChangeLog:

* gdbint.texinfo (Item Output Functions): Update signature
for ui_out_field_core_addr.

* disasm.h (gdb_disassembly): Add GDBARCH parameter.
(gdb_print_insn): Likewise.
* disasm.c (dump_insns): Add GDBARCH parameter.  Use it instead
of current_gdbarch.
(do_mixed_source_and_assembly): Add GDBARCH parameter.  Pass to
dump_insns.
(do_assembly_only): Likewise.
(gdb_disassembly): Add GDBARCH parameter.  Use it instead of
current_gdbarch.  Pass to subroutines.
(gdb_print_insn): Add GDBARCH parameter.  Use it instead of
current_gdbarch.

* stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
(gdb_disassembly_stub): Pass architecture to gdb_disassembly.
(do_gdb_disassembly): Add GDBARCH argument.  Store into args.
(print_frame_info): Pass architecture to do_gdb_disassembly.

* printcmd.c (print_formatted): Pass architecture to gdb_print_insn.

* mi/mi-cmd-disas.c: Include "arch-utils.h"
(mi_cmd_disassemble): Pass architecture to gdb_disassembly.

* cli/cli-cmds.c: Include "arch-utils.h".
(print_disassembly): Add GDBARCH parameter.  Pass to gdb_disassembly
and tui_show_assembly.
(disassemble_current_function): Pass architecture to
tui_get_low_disassembly_address and print_disassembly.
(disassemble_command): Pass architecture to
tui_get_low_disassembly_address and print_disassembly.

* tui/tui.c (tui_show_assembly): Add GDBARCH parameter.  Pass to
tui_update_source_windows_with_addr.

* tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
(struct tui_source_info): Likewise.
* tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.

* tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
Pass to gdb_print_insn.
(tui_find_disassembly_address): Add GDBARCH parameter.  Pass to
tui_disassemble.
(tui_set_disassem_content): Add GDBARCH parameter.  Install into
source_info.gdbarch.  Pass to tui_disassemble.
(tui_show_disassem): Add GDBARCH parameter.  Pass to
tui_update_source_window.
(tui_show_disassem_and_update_source): Add GDBARCH parameter.  Pass to
tui_show_disassem and tui_update_source_window.

(tui_get_begin_asm_address): Return locator architecture in addition
to locator PC value.

(tui_get_low_disassembly_address): Add GDBARCH parameter.   Pass to
tui_get_low_disassembly_address.

(tui_vertical_disassem_scroll): Pass architecture to subroutines.

* tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
(tui_show_disassem): Likewise.
(tui_show_disassem_and_update_source): Likewise.
(tui_get_begin_asm_address): Return architecture and PC value.

* tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
(tui_show_assembly): Add GDBARCH parameter.

* tui/tui-layout.c (extract_display_start_addr): Return current window
architecture in addition to current PC value.

(tui_set_layout): Update calls to tui_get_low_disassembly_address and
extract_display_start_addr.  Pass architecture to
tui_update_source_windows_with_addr.

* tui/tui-source.c: Include "objfiles.h".
(tui_set_source_content): Initialize window architecture.
(tui_show_symtab_source): Add GDBARCH parameter.  Pass to
tui_update_source_window_as_is

* tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.

* tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
Install locator architecture.
(tui_set_locator_filename): Update call.
(tui_show_frame_info): Pass architecture to tui_set_locator_info
and subroutines.

* tui/tui-win.c (make_visible_with_new_height): Pass architecture
to tui_update_source_window.

* tui/tui-winsource.c: Include "objfiles.h".
(tui_display_main): Update call to tui_get_begin_asm_address.
Pass architecture to tui_update_source_windows_with_addr.
(tui_update_source_window): Add GDBARCH parameter.  Pass to
tui_update_source_window_as_is.
(tui_update_source_window_as_is): Add GDBARCH parameter.
Pass to tui_set_disassem_content.
(tui_update_source_windows_with_addr): Add GDBARCH parameter.
Pass to subroutines.
(tui_update_source_windows_with_line): Pass objfile architecture
to subroutines.
(tui_horizontal_source_scroll): Pass architecture to
tui_update_source_window_as_is.

* tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
parameter.
(tui_update_source_window_as_is): Likewise.
(tui_update_source_windows_with_addr): Likewise.

* breakpoint.h (struct breakpoint): New member GDBARCH.
* breakpoint.c: Include "arch-utils.h".
(set_raw_breakpoint_without_location): Add GDBARCH parameter.
Use it to set breakpoint architecture.
(set_raw_breakpoint): Add GDBARCH parameter.
(create_internal_breakpoint): Likewise.
(create_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise.
(break_command_really): Likewise.
(create_ada_exception_breakpoint): Likewise.
Update local callers to pass architecture:
(create_internal_breakpoint): Update.
(create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_thread_event_breakpoint): Update.
(create_solib_event_breakpoint): Update.
(create_catchpoint): Update.
(create_fork_vfork_event_catchpoint): Update.
(set_momentary_breakpoint): Update.
(clone_momentary_breakpoint): Update.
(create_breakpoint): Update.
(create_breakpoints): Update.
(break_command_really): Update.
(break_command_1): Update.
(set_breakpoint): Update.
(watch_command_1): Update.
(catch_fork_command_1): Update.
(catch_exec_commnd_1): Update.
(handle_gnu_v3_exceptions): Update.
(create_ada_exception_breakpoint): Update.
(catch_ada_exception_command): Update.
(catch_assert_command): Update.
(trace_command): Update.

* breakpoint.h (struct bp_location): New member GDBARCH.
* breakpoint.c (get_sal_arch): New function.
(set_raw_breakpoint): Set location architecture.
(add_location_to_breakpoint): Likewise.
(clone_momentary_breakpoint): Likewise.
(watch_command_1): Likewise.
(update_watchpoint): Likewise.
(bp_loc_is_permanent): Use location architecture instead of
current_gdbarch.
(adjust_breakpoint_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
Update callers of adjust_breakpoint_address to pass
breakpoint location architecture:
(set_raw_breakpoint): Update.
(watch_command_1): Update.

        * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
of current_gdbarch.
(add_local_symbols): Add GDBARCH parameter.  Pass to collect_symbol.
(encode_actions): Pass tracepoint architecture to add_local_symbols
(encode_actions): Use tracepoint architecture instead of
current_gdbarch.  Pass it to add_local_symbols and collect_symbol.

* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
of print_one callback with last_loc.
* breakpoint.c (print_one_breakpoint_location): Replace last_addr
parameter with last_loc.
(print_one_breakpoint): Likewise.
(do_captured_breakpoint_query): Update call.
(breakpoint_1): Pass last_loc instead of last_addr to
print_one_breakpoint.  Pass last location architecture instead of
current_gdbarch to set_next_address.
Update all implementations of the print_one callback:
* breakpoint.c (print_one_catch_fork): Update.
(print_one_catch_vfork): Update.
(print_one_catch_exec): Update.
(print_one_exception_catchpoint): Update.
* ada-lang.c (print_one_exception): Update.
(print_one_catch_exception): Update.
(print_one_catch_exception_unhandled): Update.
(print_one_catch_assert): Update.

* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
parameter.  Use it instead of gdbarch_addr_bit (current_gdbarch).
(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
to print_one_breakpoint_location.
(breakpoint_address_bits): New function.
(do_captured_breakpoint_query): Compute number of address bits to print
and pass it to print_one_breakpoint.
(breakpoint_1): Likewise.  Use it instead of current_gdbarch.

* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_thread_event_breakpoint): Likewise.
Update callers to create_thread_event_breakpoint:
* aix-thread.c (pd_enable): Update.
* linux-thread-db.c (enable_thread_event): Update.

* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_solib_event_breakpoint): Likewise.
Update callers to create_solib_event_breakpoint:
* solib-frv.c (enable_break, enable_break2): Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-svr4.c (enable_break): Update.

* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
* breakpoint.c (insert_single_step_breakpoint): Likewise.
Update callers to insert_single_step_breakpoint:
* alpha-tdep.c (alpha_software_single_step): Update.
* arm-linux-tdep.c (arm_linux_software_single_step): Update.
* arm-tdep.c (arm_software_single_step): Update.
* cris-tdep.c (cris_software_single_step): Update.
* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
* sparc-tdep.c (sparc_software_single_step): Update.
* spu-tdep.c (spu_software_single_step): Update.
* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
Pass it to insert_single_step_breakpoint.
(mips_software_single_step): Pass architecture to
deal_with_atomic_sequence and insert_single_step_breakpoint.

* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
Update callers to deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint:
* breakpoint.c (single_step_gdbarch): New static variable.
(insert_single_step_breakpoint): Pass GDBARCH parameter to
deprecated_insert_raw_breakpoint.  Store it in single_step_gdbarch.
(remove_single_step_breakpoints): Pass architecture stored in
single_step_gdbarch to deprecated_remove_raw_breakpoint.
* rs6000-nat.c (exec_one_dummy_insn): Update.
* solib-irix.c (enable_break, disable_break): Update.
* procfs.c (procfs_mourn_inferior): Update.
(remove_dbx_link_breakpoint): Update.

* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
Update callers to set_breakpoint, set_momentary_breakpoint and
set_momentary_breakpoint_at_pc:
* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
(until_break_command): Update.
* infcall.c (call_function_by_hand): Update.
* infcmd.c (finish_backward, finish_forward): Update.
* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
parameter.  Pass it to set_momentary_breakpoint.
(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
Pass it to set_momentary_breakpoint_at_pc.
(handle_inferior_event): Update.
(insert_step_resume_breakpoint_at_frame): Update.
(insert_step_resume_breakpoint_at_caller): Update..
* mi/mi-cmd-break.c: Include "arch-utils.h".
(mi_cmd_break_insert): Update.

* target.h (struct target_ops): Add GDBARCH parameter to
to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
and to_remove_hw_breakpoint members.
(target_insert_breakpoint, target_remove_breakpoint,
target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
parameter, pass to target routine.
(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
parameter.
* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
GDBARCH parameter, pass to target routine.
(update_current_target): Update function signature.
* breakpoint.c (insert_bp_location, remove_breakpoint,
deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
Pass architecture to target_ routines.
Update all implementations of the target breakpoint routines to take
GDBARCH parameter and use it instead of GDBARCH as appropriate:
* corelow.c (ignore): Update.
* exec.c (ignore): Update.
* mem-break.c (memory_insert_breakpoint): Update.
(memory_remove_breakpoint): Update.
* monitor.c (monitor_insert_breakpoint): Update.
(monitor_remove_breakpoint): Update.
* record.c (record_insert_breakpoint): Update.
(record_beneath_to_insert_breakpoint): Update.
(record_remove_breakpoint): Update.
(record_beneath_to_remove_breakpoint): Update.
* remote.c (remote_insert_breakpoint): Update.
(remote_remove_breakpoint): Update.
(remote_insert_hw_breakpoint): Update.
(remote_remove_hw_breakpoint): Update.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
(m32r_remove_breakpoint): Update.
* remote-mips.c (mips_insert_breakpoint): Update.
(mips_remove_breakpoint): Update.
* i386-nat.c (i386_insert_hw_breakpoint): Update.
(i386_remove_hw_breakpoint): Update.
* nto-procfs.c (procfs_insert_breakpoint):  Update.
(procfs_remove_breakpoint): Update.
(procfs_insert_hw_breakpoint): Update.
(procfs_remove_hw_breakpoint): Update.

doc/ChangeLog:

* gdbint.texi (Examples of Use of @code{ui_out} functions):
Update example code extrated from breakpoint.c.

* frame.h (frame_unwind_arch): New.
(frame_unwind_caller_arch): Likewise.
* frame-unwind.h (frame_prev_arch_ftype): New type.
(struct frame_unwind): New member prev_arch.
* frame.c (struct frame_info): New member prev_arch.
(frame_unwind_arch): New function.
(frame_unwind_caller_arch): Likewise..
(get_frame_arch): Reimplement in terms of frame_unwind_arch.
* sentinel-frame.c (sentinel_frame_prev_arch): New function.
(sentinel_frame_unwinder): Install it.

* frame.c (frame_pc_unwind): Use frame_unwind_arch instead
of get_frame_arch.
(frame_unwind_register_value): Likewise.
(frame_unwind_register_signed): Likewise.
(frame_unwind_register_unsigned): Likewise.
* frame-unwind.c (frame_unwind_got_optimized): Likewise.
(frame_unwind_got_register): Likewise.
(frame_unwind_got_constant): Likewise.
(frame_unwind_got_bytes): Likewise.
(frame_unwind_got_address): Likewise.

* frame.h (enum frame_type): New value ARCH_FRAME.
* frame.c (fprint_frame_type): Handle ARCH_FRAME.
* stack.c (print_frame_info): Likewise.

* aoutx.h (aout_get_external_symbols): Declare 'amt' locally.
* bfdwin.c (bfd_free_window): Cast to unsigned long.

* target.h (struct target_ops): New member to_thread_architecture.
(target_thread_architecture): New macro.
* target.c (update_current_target): Inherit to_thread_architecture.
(default_thread_architecture): New function.
(debug_to_thread_architecture): New function.
(setup_target_debug): Handle to_thread_architecture.

* regcache.h (get_thread_arch_regcache): New.
* regcache.c (struct regcache_list): New data type.
(current_regcache): Hold regcache list instead of single regcache.
(current_thread_ptid, current_thread_arch): New static variables.
(get_thread_arch_regcache): New function.
(get_thread_regcache): Use it.  Call target_thread_architecture.
(regcache_thread_ptid_changed): Update to current_regcache changes.
(registers_changed): Likewise.  Reset current_thread_arch and
current_thread_ptid.

* remote.c (remote_wait): Access target registers in target_gdbarch.
* linux-nat.c (linux_nat_do_thread_registers): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* solib-svr4.c (enable_break): Likewise.
(svr4_relocate_main_executable): Likewise.

* python/python-internal.h (struct language_defn): Declare.
(python_gdbarch, python_language): Likewise.
(ensure_python_env): Add prototype.
(make_cleanup_py_restore_gil): Remove prototype.

* python/python.c: Include "arch-utils.h", "value.h" and "language.h".
(python_gdbarch, python_language): New global variables.
(struct python_env): New data type.
(ensure_python_env, restore_python_env): New functions.
(eval_python_from_control_command): Call ensure_python_env to
install current architecture and language.
(python_command, gdbpy_new_objfile): Likewise.
* python/python-cmd.c: Include "arch-utils.h" and "language.h".
(cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
ensure_python_env.
* python/python-type.c (clean_up_objfile_types): Likewise.
* python/python-objfile.c: Include "language.h".
(clean_up_objfile): Call ensure_python_env.
* python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
(apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
* varobj.c (varobj_ensure_python_env): New helper function.
(varobj_get_display_hint, update_dynamic_varobj_children,
install_default_visualizer, varobj_set_visualizer, free_variable,
value_get_print_value): Call it.
(value_get_print_value): Add varobj argument instead of pretty
printer argument.  Update all callers.

* python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
Remove.

* value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
(call_internal_function): Likewise.
* value.c (call_internal_function): Likewise.  Pass to handler.
* eval.c (evaluate_subexp_standard): Update call.
* python/python-function.c: Include "language.h".
(fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
make_cleanup_python_env.

* python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
valpy_str): Use python_gdbarch and python_language instead of
current_gdbarch and current_language.
* python/python-type.c (typy_lookup_typename): Likewise.

* arch-utils.c (selected_byte_order): Return target_byte_order_user.
(show_endian): Use target_byte_order_user if specified; otherwise
use get_current_arch () instead of current_gdbarch.
(show_architecture): Use set_architecture_string if specified;
otherwise use get_current_arch () instead of current_gdbarch.
(get_current_arch): New function.
* arch-utils.h (get_current_arch): Add prototype.

* osabi.c (show_osabi): Use get_current_arch () instead of
current_gdbarch.

* findcmd.c: Include "arch-utils.h".
(parse_find_args): Add BIG_P argument.  Use it instead of byte order
of current_gdbarch.
(find_command): Use get_current_arch () instead of current_gdbarch.
Pass byte order to parse_find_args.

* maint.c: Include "arch-utils.h".
(maintenance_print_architecture): Use get_current_arch () instead
of current_gdbarch.

* reggroups.c: Include "arch-utils.h".
(maintenance_print_reggroups): Use get_current_arch () instead
of current_gdbarch.

* symfile.c: Include "arch-utils.h".
(overlay_load_command): Use get_current_arch () instead of
current_gdbarch.

* value.c: Include "arch-utils.h".
(show_convenience): Use get_current_arch () instead of
current_gdbarch.

* tui/tui-regs.c: Include "arch-utils.h".
(tui_reg_next_command): Use get_current_arch () instead of
current_gdbarch.

* mi/mi-main.c: Include "arch-utils.h".
(mi_cmd_data_read_memory): Use get_current_arch () instead of
current_gdbarch.

* parse.c: Include "arch-utils.h".
(parse_exp_in_context): Use get_current_arch () instead of
current_gdbarch.

* gdbtypes.c (make_pointer_type, make_reference_type,
smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
Use type architecture instead of current_gdbarch.

* gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
Add GDBARCH paramter.
* gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
Add GDBARCH parameter.   Use it instead of current_gdbarch.
* c-typeprint.c (c_type_print_modifier): Update call.
* parse.c (push_type_address_space): Likewise.

* findvar.c (extract_typed_address, store_typed_address): Use type
architecture instead of current_gdbarch.

* value.c (value_as_address, unpack_field_as_long): Use type architecture
instead of current_gdbarch.

* doublest.c (floatformat_from_length): Add GDBARCH argument.  Use it
instead of current_gdbarch.
(floatformat_from_type): Pass type architecture.

* infcall.c (find_function_addr): Use type architecture instead
of current_gdbarch.

* valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
value_bit_index): Use type architecture instead of current_gdbarch.
* valops.c (value_cast, value_slice): Likewise.

* value.h (modify_field): Add TYPE argument.
* value.c (modify_field): Add TYPE argument.  Use type architecture
instead of current_gdbarch.
(set_internalvar_component): Likewise.
* eval.c (evaluate_struct_tuple): Update call.
* valops.c (value_assign): Likewise.
* ada-lang.c (modify_general_field): Likewise.  Add TYPE argument.
(make_array_descriptor): Update calls.
(move_bits): Add BITS_BIG_ENDIAN_P argument.  Use it instead of
current_gdbarch.
(ada_value_assign, value_assign_to_component): Update calls.
(decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
value_assign_to_component): Use type arch instead of current_gdbarch.

* printcmd.c (float_type_from_length): Remove GDBARCH argument,
use type architecture instead.
(print_scalar_formatted, printf_command): Update calls.  Use type
architecture instead of current_gdbarch.
* valprint.c (val_print_type_code_int): Use type architecture
instead of current_gdbarch.
* varobj.c (value_get_print_value): Likewise.
* python/python-prettyprint.c (print_string_repr): Add GDBARCH
argument.  Use it instead of current_gdbarch.
(apply_val_pretty_printer): Update call.

* ada-valprint.c (ada_val_print_1): Use type architecture instead
of current_gdbarch.
* c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
Use it instead of current_gdbarch.
(c_val_print): Update calls passing type architecture.
* f-valprint.c (f_val_print): Use type architecture instead of
current_gdbarch.
* jv-valprint (java_value_print): Likewise.
* m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
Use it instead of current_gdbarch.
(print_unpacked_pointer): Update calls passing type architecture.
* scm-valprint.c (scm_scmval_print): Use type architecture instead of
current_gdbarch.

* gnu-v3-abi.c (get_class_arch): Remove.
(gnuv3_rtti_type): Use get_type_arch instead of get_class_arch.  Remove
special-case check for Java classes.
(gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
Use get_type_arch instead of get_class_arch.

* gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
(TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
(alloc_type_arch): Add prototype.
(alloc_type_copy): Likewise.
(get_type_arch): Likewise.
(arch_type): Likewise.
(arch_integer_type): Likewise.
(arch_character_type): Likewise.
(arch_boolean_type): Likewise.
(init_float_type): Remove, replace by ...
(arch_float_type): ... this.
(init_complex_type): Remove, replace by ...
(arch_complex_type): ... this.
(init_flags_type): Remove, replace by ...
(arch_flags_type): ... this.
(init_composite_type): Remove, replace by ...
(arch_composite_type): ... this.

* gdbtypes.c (alloc_type): No longer support NULL objfile.
(init_type): Likewise.
(alloc_type_arch): New function.
(alloc_type_copy): New function.
(get_type_arch): New function.

(smash_type): Preserve type ownership information.
(make_pointer_type, make_reference_type, make_function_type,
smash_to_memberptr_type, smash_to_method_type): No longer
preserve OBJFILE across smash_type calls.
(make_pointer_type, make_reference_type, make_function_type,
lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
create_range_type, create_array_type, create_set_type, copy_type):
Use alloc_type_copy when allocating types.
(check_typedef): Use alloc_type_arch.
(copy_type_recursive): Likewise.  Preserve type ownership data
after copying type.
(recursive_dump_type): Dump type ownership data.
(alloc_type_instance): Update type ownership check.
(copy_type, copy_type_recursive): Likewise.

(arch_type): New function.
(arch_integer_type): Likewise.
(arch_character_type): Likewise.
(arch_boolean_type): Likewise.
(init_float_type): Remove, replace by ...
(arch_float_type): ... this.
(init_complex_type): Remove, replace by ...
(arch_complex_type): ... this.
(init_flags_type): Remove, replace by ...
(arch_flags_type): ... this.
(append_flags_type_flag): Move down.
(init_composite_type): Remove, replace by ...
(arch_composite_type): ... this.
(append_composite_type_field_aligned,
append_composite_type_field): Move down.

* gdbarch.c (gdbtypes_post_init): Allocate all types
using per-architecture routines.
* ada-lang.c (ada_language_arch_info): Likewise.
* f-lang.c (build_fortran_types): Likewise.
* jv-lang.c (build_java_types): Likewise.
* m2-lang.c (build_m2_types): Likewise.
* scm-lang.c (build_scm_types): Likewise.

* ada-lang.c (ada_type_of_array): Use alloc_type_copy.
(packed_array_type): Likewise.
(ada_template_to_fixed_record_type_1): Likewise.
(template_to_static_fixed_type): Likewise.
(to_record_with_fixed_variant_part): Likewise.
(to_fixed_variant_branch_type): Likewise.
(to_fixed_array_type): Likewise.
(to_fixed_range_type): Likewise.
(empty_record): Use type instead of objfile argument.
Use alloc_type_copy.
(to_fixed_variant_branch_type): Update call to empty_record.
* jv-lang.c (type_from_class): Use alloc_type_arch.

* arm-tdep.c (arm_ext_type): Allocate per-architecture type.
* i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
i386_mmx_type, i386_sse_type): Likewise.
* ia64-tdep.c (ia64_ext_type): Likewise.
* m32c-tdep.c (make_types): Likewise.
* m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
* rs6000-tdep.c (rs6000_builtin_type_vec64,
rs6000_builtin_type_vec128): Likewise.
* sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
* sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
sparc64_fprs_type): Likewise.
* spu-tdep.c (spu_builtin_type_vec128): Likewise.
* xtensa-tdep.c (xtensa_register_type): Likewise.
* linux-tdep.c (linux_get_siginfo_type): Likewise.
* target-descriptions.c (tdesc_gdb_type): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.

* i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
i386_mxcsr_type members.
(i386_eflags_type): Make into function.
(i386_mxcsr_type): Likewise.
* i386-tdep.c (i386_eflags_type): Make into function.
(i386_mxcsr_type): Likewise.
(i386_register_type): Update uses.
(i386_init_types): Remove.
(_initialize_i386_tdep): Do not call it.
* amd64-tdep.c (amd64_register_type): Update uses.

* m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
* m68k-tdep.c (m68k_ps_type): Make into function.
(m68k_register_type): Update use.
(m68k_init_types): Remove.
(_initialize_m68k_tdep): Do not call it.

* sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
sparc64_fprs_type members.
* sparc-tdep.c (sparc_psr_type): Make into function.
(sparc_fsr_type): Likewise.
(sparc32_register_type): Update uses.
(sparc_init_types): Remove.
(_initialize_sparc_tdep): Do not call it.
* sparc64-tdep.c (sparc64_pstate_type): Make into function.
(sparc64_fsr_type): Likewise.
(sparc64_fprs_type): Likewise.
(sparc64_register_type): Update uses.
(sparc64_init_types): Remove.
(_initialize_sparc64_tdep): Likewise.

* gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
(init_float_type, init_complex_type): Add prototypes.
* gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
(_initialize_gdbtypes): Do not initialize them.
(build_flt): Rename to ...
(init_float_type): ... this.  Make global.
(build_complex): Rename to ...
(init_complex_type): ... this.  Make global.  Remove BIT argument.
(gdbtypes_post_init): Update calls.

* ada-lang.c (ada_language_arch_info): Use init_float_type.
* jv-lang.c (build_java_types): Likewise.
* m2-lang.c (build_m2_types): Likewise.
* f-lang.c (build_fortran_types): Use init_float_type and
init_complex_type.

* target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
of using builtin_type_ieee_single, builtin_type_ieee_double, or
builtin_type_arm_ext.

* ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
* ia64-tdep.c (builtin_type_ia64_ext): Remove.
(_initialize_ia64_tdep): Do not initialize it.
(floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
Move up.
(ia64_ext_type): New function.
(ia64_register_reggroup_p, ia64_convert_register_p,
ia64_register_to_value, ia64_value_to_register,
ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
instead of builtin_type_ia64_ext.

* i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
(i387_ext_type): Add prototype.
* i386-tdep.c (i387_ext_type): New function.
(i386_extract_return_value, i386_store_return_value,
i386_register_type): Use it instead of builtin_type_i387_ext.
* amd64-tdep.c (amd64_register_type): Likewise.
* i387-tdep.c (print_i387_value, i387_register_to_value,
i387_value_to_register): Likewise.
(print_i387_value, print_i387_ext): Add GDBARCH argument.
(print_i387_ext, i387_print_float_info): Pass to subroutines.

* m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
* m68k-tdep.c (m68881_ext_type): New function.
(m68k_register_type, m68k_convert_register_p): Use it instead
of builtin_type_m68881_ext.

* arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
* arm-tdep.c (arm_ext_type): New function.
(arm_register_type): Use it instead of builtin_type_arm_ext.

* alpha-tdep.c (alpha_register_type): Use builtin types
instead of builtin_type_ieee_double.

* mips-tdep.c (mips_float_register_type, mips_double_register_type):
Remove.
(mips_register_type): Use builtin types instead of
builtin_type_ieee_single and builtin_type_ieee_double.
(mips_print_fp_register): Use builtin types instead of
mips_float_register_type and mips_double_register_type.

* hppa-tdep.c (hppa32_register_type, hppa64_register_type):
Use builtin types instead of builtin_type_ieee_single and
builtin_type_ieee_double.

* gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
builtin_type_int16, builtin_type_uint16, builtin_type_int32,
builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
builtin_type_int128, builtin_type_uint128): Remove.
(struct builtin_type): New members builtin_int0, builtin_int8,
builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
and builtin_uint128.
* gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
builtin_type_int16, builtin_type_uint16, builtin_type_int32,
builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
builtin_type_int128, builtin_type_uint128): Remove.
(_initialize_gdbtypes): Do not initialize them.
(gdbtypes_post_init): Initialize fixed-size integer types.

* dwarf2expr.c (unsigned_address_type, signed_address_type): Add
GDBARCH argument.  Return platform-specific type.
(dwarf2_read_address, execute_stack_op): Update calls.

* target-descriptions.c (tdesc_gdb_type): Use platform-specific types
instead of global builtin_int_... variables.
* mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
* printcmd.c (do_examine): Likewise.
* jv-exp.y (parse_number): Likewise.

* alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
alpha_store_return_value): Likewise.
* amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
* amd64-tdep.c (amd64_register_type): Likewise.
* arm-tdep.c (arm_register_type): Likewise.
* avr-tdep.c (avr_register_type): Likewise.
* cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
* frv-tdep.c (frv_register_type): Likewise.
* h8300-tdep.c h8300_register_type): Likewise.
* hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
hppa64_register_type): Likewise.
* i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
* iq2000-tdep.c (iq2000_register_type): Likewise.
* lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
* m32r-tdep.c (m32r_register_type): Likewise.
* m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
m68hc11_pseudo_register_write): Likewise.
* m68k-tdep.c (m68k_register_type): Likewise.
* m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
* mep-tdep.c (mep_register_type): Likewise.
* mips-tdep.c (mips_register_type, mips_pseudo_register_type,
mips_print_fp_register): Likewise.
* moxie-tdep.c (moxie_register_type): Likewise.
* mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
* rs6000-tdep.c (rs6000_builtin_type_vec64,
rs6000_builtin_type_vec128): Likewise.
* score-tdep.c (score_register_type): Likewise.
* sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
Likewise.
* sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
Likewise.
* spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
* v850-tdep.c (v850_register_type): Likewise.
* xstormy16-tdep.c (xstormy16_register_type): Likewise.
* xtensa-tdep.c (xtensa_register_type): Likewise.

* mt-tdep.c (struct gdbarch_tdep): New data structure.
(mt_gdbarch_init): Alloc TDEP structures.
(mt_register_type): Cache coprocessor type in TDEP instead of
static global variable.

* xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
* xtensa-tdep.c (type_entries): Remove.
(xtensa_register_type): Cache fixed-size types in TDEP instead
of in global variable.

* gdbtypes.h (builtin_type_true_char): Remove.
(builtin_type_true_unsigned_char): Likewise.
(struct builtin_type): Add builtin_true_char and
builtin_true_unsigned_char members.
* gdbtypes.c (builtin_type_true_char): Remove.
(builtin_type_true_unsigned_char): Likewise.
(_initialize_gdbtypes): Do not initialize them.
(gdbtypes_post_init): Initialize builtin_true_char and
builtin_true_unsigned_char members of builtin_type.

* printcmd.c (print_scalar_formatted): Use builtin_type
members instead of builtin_type_true_char and
builtin_type_true_unsigned_char.
* ada-valprint.c (ada_val_print_1): Likewise.

* gdbtypes.h (builtin_type_void): Remove.
* gdbtypes.c (builtin_type_void): Remove.
(_initialize_gdbtypes): Do not initialize it.

(safe_parse_type): Add GDBARCH argument.  Use it to construct
void return type.
(check_stub_method): Update call.

* infcall.c (call_function_by_hand): Use platform-specific type
instead of builtin_type_void.
* valops.c (value_cast): Use input void type instead of
builtin_type_void.

* ada-lang.c (assign_component): Use platform-specific integer type
instead of builtin_type_int32 type.
(ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.

* ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
instead of builtin_type_int8 type.
* valarith.c (value_x_unop): Likewise.
* python/python-value.c (valpy_absolute): Avoid reference to
builtin_type_int8 type.

* eval.c (evaluate_subexp_standard): Use platform-specific integer
type instead of builtin_type_int8 as EVAL_SKIP return value type.
* ada-lang.c (ada_evaluate_subexp): Likewise.
* jv-lang.c (evaluate_subexp_java): Likewise.
* m2-lang.c (evaluate_subexp_modula2): Likewise.
* scm-lang.c (evaluate_exp): Likewise.

* value.h (value_bitstring): Add INDEX_TYPE argument.
* valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
of builtin_type_int32 as base range type.
* eval.c (evaluate_subexp_standard): Update value_bitstring call.

* gdbtypes.c (lookup_array_range_type): Add prototype.
(lookup_string_range_type): Likewise.
* gdbtypes.c (lookup_array_range_type): New function.
(lookup_string_range_type): Likewise.

* ax-gdb.c (gen_repeat): Use lookup_array_range_type.
* parse.c (follow_types): Likewise.
* jv-lang.c (java_array_type): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
* mt-tdep.c (mt_register_type): Likewise.
* sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
* sh64-tdep.c (sh64_build_float_register_type): Likewise.
* value.c (allocate_repeat_value): Likewise.
* valops.c (value_array, value_cstring): Likewise.
* valops.c (value_string): Use lookup_string_range_type.

* m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
redundant check for NULL TYPE_TARGET_TYPE.
* m2-valprint.c (m2_print_long_set): Likewise.
* p-valprint.c (pascal_type_print_base): Likewise.

ChangeLog:

* printcmd.c (next_gdbarch): New static variable.
(set_next_address, do_examine, x_command): Set it.
(decode_format): Use 'a' size to indicate width of an address.
(do_examine): Add GDBARCH argument.  Handle 'a' size.
(x_command): Pass architecture to do_examine.
Error if called without argument the first time.
(do_one_display): Pass architecture to do_examine.

(examine_i_type, examine_b_type, examine_h_type, examine_w_type,
examine_g_type): Remove.
(_initialize_printcmd): Do not initialize them.
(do_examine): Use builin_type_int... instead of examine_..._type.

testsuite/ChangeLog:

* gdb.base/default.exp: Update test case for "x" changes.

* gdbtypes.h (struct builtin_type): Add internal_fn member.
* gdbtypes.c (gdbtypes_post_init): Initialize it.
* value.c (internal_fn_type): Remove.
(_initialize_values): Do not initialize it.

* value.c (struct internalvar): Add enum internalvar_kind type and
kind member.  Restructure union internalvar_data type.  Remove type,
canonical, and make_value members.
(init_if_undefined_command): Update for data structure changes.
(create_internalvar): Likewise.
(create_internalvar_type_lazy): Likewise.
(get_internalvar_integer): Likewise.
(get_internalvar_function): Likewise.
(set_internalvar_component): Likewise.
(set_internalvar): Likewise.
(set_internalvar_integer): Likewise.
(set_internalvar_function): Likewise.
(clear_internalvar): Likewise.
(add_internal_function): Likewise.
(preserve_one_internalvar): New function.
(preserve_values): Call it.

* value.h (value_of_internalvar): Add GDBARCH parameter.
(internalvar_make_value): Likewise.
* value.c (value_of_internalvar): Add GDBARCH parameter.  Pass it to
make_value callback.  Use it to generate per-architecture result value
types for internal variables with no pre-defined type.  Update for data
structure changes.
(show_convenience): Pass architecture to value_of_internalvar.
* eval.c (evaluate_subexp_standard): Likewise.
* infrun.c (siginfo_make_value): Add GDBARCH parameter.  Use it
instead of current frame architecture.  Return per-architecture type.

* value.h (set_internalvar_string): Add prototype.
* value.c (set_internalvar_string): New function.
* tracepoint.c (set_traceframe_context): Use it.

* jv-lang.h (java_int_type, java_byte_type, java_short_type,
java_long_type, java_boolean_type, java_char_type, java_float_type,
java_double_type, java_void_type): Remove.
(struct builtin_java_type): New data type.
(builtin_java_type): Add prototype.
(java_primitive_type): Add GDBARCH argument.
(java_primitive_type_from_name): Likewise.
(type_from_class): Likewise.

* jv-lang.c (java_int_type, java_byte_type, java_short_type,
java_long_type, java_boolean_type, java_char_type, java_float_type,
java_double_type, java_void_type): Remove.

(build_java_types, builtin_java_type): New functions.
(java_type_data): New static variable.
(_initialize_java_language): Initialize it.  No longer initialize
global types.
(java_language_arch_info): Use per-architecture types.

(java_primitive_type): Add GDBARCH argument.  Return per-architecture
type instead of refering to global variable.
(java_primitive_type_from_name): Add GDBARCH argument.
(java_primitive_type_name): New function.
(java_demangled_signature_length): Use it instead of
java_primitive_type_from_name.
(java_demangled_signature_copy): Likewise.

(type_from_class): Add GDBARCH argument.  Pass to java_link_class_type,
java_primitive_type, and recursive type_from_class call.
(java_link_class_type): Add GDBARCH argument.  Pass to type_from_class
calls.  Use per-architecture types instead of global types.

* jv-exp.y (parse_java_type): New define.
Use per-architecture types instead of global types througout.

* jv-valprint.c (java_value_print): Pass architecture to
type_from_class and java_primitive_type_from_name.  Use per-
architecture types instead of global types.

2009-07-02  Tristan Gingold  <gingold@adacore.com>

* configure.ac: Do not exclude gas for i386-*-darwin.
Add a case for x86_64-*-darwin.
* configure: Regenerate.

2009-07-02  Tristan Gingold  <gingold@adacore.com>

* Makefile.am (OBJ_FORMATS): Add macho.
(CPU_OBJ_VALID): Ditto.
(OBJ_FORMAT_CFILES): Add config/obj-macho.c
(OBJ_FORMAT_HFILES): Add config/obj-macho.h
(obj-macho.o): New rule.
* Makefile.in: Regenerated.
* configure.tgt (generic_target): Add i386-*-darwin*.
* config/tc-i386.h: Use i386_target_format for Mach-O.
* config/tc-i386.c (i386_target_format): Define it for Mach-O.
(i386_target_format): Add a case for bfd_target_mach_o_flavour.
* config/obj-macho.h: New file.
* config/obj-macho.c: New file.

*** empty log message ***

daily update

Update ChangeLog entries.

    PR 10168
        * config/tc-arm.c (do_t_pkhtb): Swap Rm and Rn when encoding as
        PKHBT.
        * gas/arm/thumb32.d: Fix expected disassembly of PKHTB insn.

* freebsd.h (Target_freebsd::do_adjust_elf_header): Use size
instead of 32.

* NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
support for i386-linux, amd64-linux, and i386-win32 builds of
gdbserver.

    PR 6714
        * rclex.c (handle_quotes): Do not complain about whitespace
        separating quoted strings.
        (rclex_string): Ignore whitespace when looking for a new opening
        quote following a closing quote.

    * bfd/bfd.m4 (BFD_HAVE_TIME_TYPE_MEMBER,
        BFD_HAVE_SYS_STAT_TYPE_MEMBER): New config functions.
        * bfd/configure.in: Use them.
        * bfd/configure: Regenerate.
        * bfd/config.in: Regnerate.
        * bfd/vmsutil.c: Include sysdep.h, remove ansidecl.h.
        #define _BSD_SOURCE. Add comments.
        (vms_file_stats_name): Calculate creation date based on available
        runtime data. Return 1 for version instead of 0.

    PR 10072
        * elf32-arm.c (elf32_arm_final_link_relocate): Add code to handle
        to R_ARM_THM_PC8 relocation.

2009-07-01  Paul Brook <paul@codesourcery.com>

gas/
* config/tc-arm.c (MISSING_FNSTART): Define.
(s_arm_unwind_fnstart): Diagnose duplicate directive.
(s_arm_unwind_handlerdata, s_arm_unwind_fnend, s_arm_unwind_fnend,
s_arm_unwind_cantunwind, s_arm_unwind_personalityindex,
s_arm_unwind_personality, s_arm_unwind_save, s_arm_unwind_movsp,
s_arm_unwind_pad, s_arm_unwind_setfp, s_arm_unwind_raw): Error if
not inside function unwinding region.

gas/testsuite/
* gas/arm/fp-save.s: Add .fnstart and .fnend directives.

2009-07-01  Tristan Gingold  <gingold@adacore.com>

* gdb.base/bigcore.exp: Make darwin untested.

daily update

*** empty log message ***

(HFILES_NO_SRCDIR): Remove entries for deleted files.

*** empty log message ***

*** empty log message ***

gdb/testsuite/
* gdb.base/completion.exp (directory completion): Create the directory.
New variables uniquedir, escapeduniquedir, uniquesu, uniquesub,
escapeuniquesub.
(directory completion 2): Expect now ${escapeuniquesub}.
(Glob remaining of directory test): Remove one excessive newline.
Expect the real output.

Add h/w watchpoint support to x86-linux, win32-i386.
* Makefile.in (SFILES): Add i386-low.c
(i386_low_h): Define.
(i386-low.o): Add dependencies.
(linux-x86-low.o): Add i386-low.h dependency.
(win32-i386-low.o): Ditto.
* i386-low.c: New file.
* i386-low.h: New file.
* configure.srv (i[34567]86-*-cygwin*): Add i386-low.o to srv_tgtobj.
(i[34567]86-*-linux*, i[34567]86-*-mingw*, x86_64-*-linux*): Ditto.
* linux-low.c (linux_add_process): Initialize arch_private.
(linux_remove_process): Free arch_private.
(add_lwp): Initialize arch_private.
(delete_lwp): Free arch_private.
(linux_resume_one_lwp): Call the_low_target.prepare_to_resume if
provided.
* linux-low.h (process_info_private): New member arch_private.
(lwp_info): New member arch_private.
(linux_target_ops): New members new_process, new_thread,
prepare_to_resume.
(ptid_of): New macro.
* linux-x86-low.c: Include stddef.h, i386-low.h.
(arch_process_info): New struct.
(arch_lwp_info): New struct.
(x86_linux_dr_get, x86_linux_dr_set): New functions.
(i386_dr_low_set_addr, i386_dr_low_set_control): New functions.
(i386_dr_low_get_status): New function.
(x86_insert_point, x86_remove_point): New functions.
(x86_stopped_by_watchpoint): New function.
(x86_stopped_data_address): New function.
(x86_linux_new_process, x86_linux_new_thread): New functions.
(x86_linux_prepare_to_resume): New function.
(the_low_target): Add entries for insert_point, remove_point,
stopped_by_watchpoint, stopped_data_address, new_process, new_thread,
prepare_to_resume.
* server.c (debug_hw_points): New global.
(monitor_show_help): Document set debug-hw-points.
(handle_query): Process "set debug-hw-points".
* server.h (debug_hw_points): Declare.
(paddress): Declare.
* utils.c (NUMCELLS, CELLSIZE): New macros.
(get_sell, xsnprintf, paddress): New functions.
* win32-arm-low.c (the_low_target): Add entries for insert_point,
remove_point, stopped_by_watchpoint, stopped_data_address.
* win32-i386-low.c: Include i386-low.h.
(debug_reg_state): Replaces dr.
(i386_dr_low_set_addr, i386_dr_low_set_control): New functions.
(i386_dr_low_get_status): New function.
(i386_insert_point, i386_remove_point): New functions.
(i386_stopped_by_watchpoint): New function.
(i386_stopped_data_address): New function.
(i386_initial_stuff): Update.
(get_thread_context,set_thread_context,i386_thread_added): Update.
(the_low_target): Add entries for insert_point,
remove_point, stopped_by_watchpoint, stopped_data_address.
* win32-low.c (win32_insert_watchpoint): New function.
(win32_remove_watchpoint): New function.
(win32_stopped_by_watchpoint): New function.
(win32_stopped_data_address): New function.
(win32_target_ops): Add entries for insert_watchpoint,
remove_watchpoint, stopped_by_watchpoint, stopped_data_address.
* win32-low.h (win32_target_ops): New members insert_point,
remove_point, stopped_by_watchpoint, stopped_data_address.

gdb/
* Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
(check//%): Construct FORCE_PARALLEL for the sub-make.  Extend the
comment for it.

gdb/testsuite/
Fix `make check//%' target after `make check' has been ran.
* Makefile.in (TEST_TARGETS): Remove the %/.dir dependency.  Add
a mkdir call.
(check-gdb.base%): Remove the gdb.base%/.dir dependency.
(%/.dir): Remove.

gdb/testsuite/
* lib/mi-support.exp (mi_check_thread_states): Permit any output before
the expected result record.

gdb/testsuite/
Remove racy FAILs relying just on the timeouts.
* gdb.base/setshow.exp (set annotate 2, show annotate (2))
(annotation_level 2): Remove racy FAILs.

Add h/w watchpoint support to x86-linux, win32-i386.
* Makefile.in (SFILES): Add i386-low.c
(i386_low_h): Define.
(i386-low.o): Add dependencies.
(linux-x86-low.o): Add i386-low.h dependency.
(win32-i386-low.o): Ditto.
* i386-low.c: New file.
* i386-low.h: New file.
* configure.srv (i[34567]86-*-cygwin*): Add i386-low.o to srv_tgtobj.
(i[34567]86-*-linux*, i[34567]86-*-mingw*, x86_64-*-linux*): Ditto.
* linux-low.c (linux_add_process): Initialize arch_private.
(linux_remove_process): Free arch_private.
(add_lwp): Initialize arch_private.
(delete_lwp): Free arch_private.
(linux_resume_one_lwp): Call the_low_target.prepare_to_resume if
provided.
* linux-low.h (process_info_private): New member arch_private.
(lwp_info): New member arch_private.
(linux_target_ops): New members new_process, new_thread,
prepare_to_resume.
(ptid_of): New macro.
* linux-x86-low.c: Include stddef.h, i386-low.h.
(arch_process_info): New struct.
(arch_lwp_info): New struct.
(x86_linux_dr_get, x86_linux_dr_set): New functions.
(i386_dr_low_set_addr, i386_dr_low_set_control): New functions.
(i386_dr_low_get_status): New function.
(x86_insert_point, x86_remove_point): New functions.
(x86_stopped_by_watchpoint): New function.
(x86_stopped_data_address): New function.
(x86_linux_new_process, x86_linux_new_thread): New functions.
(x86_linux_prepare_to_resume): New function.
(the_low_target): Add entries for insert_point, remove_point,
stopped_by_watchpoint, stopped_data_address, new_process, new_thread,
prepare_to_resume.
* server.c (debug_hw_points): New global.
(monitor_show_help): Document set debug-hw-points.
(handle_query): Process "set debug-hw-points".
* server.h (debug_hw_points): Declare.
(paddress): Declare.
* utils.c (NUMCELLS, CELLSIZE): New macros.
(get_sell, xsnprintf, paddress): New functions.
* win32-arm-low.c (the_low_target): Add entries for insert_point,
remove_point, stopped_by_watchpoint, stopped_data_address.
* win32-i386-low.c: Include i386-low.h.
(debug_reg_state): Replaces dr.
(i386_dr_low_set_addr, i386_dr_low_set_control): New functions.
(i386_dr_low_get_status): New function.
(i386_insert_point, i386_remove_point): New functions.
(i386_stopped_by_watchpoint): New function.
(i386_stopped_data_address): New function.
(i386_initial_stuff): Update.
(get_thread_context,set_thread_context,i386_thread_added): Update.
(the_low_target): Add entries for insert_point,
remove_point, stopped_by_watchpoint, stopped_data_address.
* win32-low.c (win32_insert_watchpoint): New function.
(win32_remove_watchpoint): New function.
(win32_stopped_by_watchpoint): New function.
(win32_stopped_data_address): New function.
(win32_target_ops): Add entries for insert_watchpoint,
remove_watchpoint, stopped_by_watchpoint, stopped_data_address.
* win32-low.h (win32_target_ops): New members insert_point,
remove_point, stopped_by_watchpoint, stopped_data_address.

ChangeLog:

2009-06-30  Paul Pluzhnikov  <ppluzhnikov@google.com>

gdb/10275
* dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
cfa_how and cfa_exp into regs and adjust users.

testsuite/ChangeLog:

2009-06-30  Paul Pluzhnikov  <ppluzhnikov@google.com>

gdb/10275
* gdb.dwarf2/dw2-restore.{S,exp}: New test.

* dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.

testsuite/
* gdb.opt/inline-locals.exp: Remove XFAIL with duplicated arg1.

    PR 10288
        * arm-dis.c (coprocessor): Print the LDC and STC versions of the
        LFM and SFM instructions as comments,.
        Improve consistency of formatting for instructions displayed as
        comments and decimal values displayed with their hexadecimal
        equivalents.
        Formatting tidy ups.

        Updated expected disassembler regexps.

* mi/mi-cmd-stack.c (parse_print_values): New.
(mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.

* varobj.c (varobj_get_type): Use type_to_string.

daily update

*** empty log message ***

gdb/testsuite/
* gdb.threads/current-lwp-dead.exp, gdb.threads/current-lwp-dead.c: New.

* infrun.c (handle_inferior_event): Context switch to the new
thread when resuming for a new_thread_event.

2009-06-29  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c: Reformat.

* ada-lang.h (ada_convert_actual): Add GDBARCH argument.
* ada-lang.c (convert_actual): Remove stale prototype.
(ensure_lval, make_array_descriptor, ada_convert_actual):
Add GDBARCH argument and pass through to subroutine calls.
(ensure_lval): Use GDBARCH instead of current_gdbarch.
* infcall.c (value_arg_coerce): Update ada_convert_actual call.

* ada-lang.c (resolve): Use per-architecture void type instead
of platform-independent one.
(ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
(ada_resolve_function): Reimplement fallback logic to avoid
explicit reference to builtin_type_void.

* ada-valprint.c (ada_print_scalar): Accept NULL type argument
to indicate scalar should be printed as default integer.
(print_optional_low_bound): Pass NULL to ada_print_scalar to
indicate default integer output.
* ada-typeprint.c (print_range, print_range_bound): Likewise.
(print_choices): Likewise.  Thus, accept NULL as val_type.
* ada-lang.c (ada_variant_discrim_type): Return NULL when failed
to look up controlling discriminant name.

* ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
Fall back to orig_type as index type if symbol lookup fails.
Allocate result types from ORIG_TYPE's objfile.
(ada_array_bound_from_type, to_fixed_array_type,
ada_evaluate_subexp): Pass original index type to
to_fixed_range_type.  Do not pass objfile.

* ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
Fall back to orig_type as index type if symbol lookup fails.
(print_array_type, ada_print_type): Pass original index type
to print_range_type_named.

* ada-lang.c (ada_index_type): Update comment.

* ada-lang.c (ada_index_type): Make static.  Add NAME argument.
Throw error on invalid input arguments.  Return NULL if unable
to determine index type.

(ada_array_bound_from_type): Remove TYPEP argument.
(ada_array_bound): Make static.  Return LONGEST instead of value.
Update for ada_array_bound_from_type change.
(ada_array_length): Return LONGEST instead of value.
Update for ada_array_bound_from_type change.
(make_array_descriptor): Update for ada_array_bound change.

(ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
ada_array_bound, ada_array_length, ada_index_type changes.
Always use ada_index_type to compute result type; fall back
to architecture-specific integer type if ada_index_type fails.

* ada-lang.h (ada_index_type): Remove prototype.
(ada_array_bound): Likewise.

* dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
a psymtab.

gdb
* README: Mention parallel check.
gdb/testsuite
* dg-extract-results.sh: New file.
* Makefile.in (FORCE_PARALLEL): New variable.
(CHECK_TARGET): New conditional variable.
(check): Use CHECK_TARGET.
(DO_RUNTEST): New variable.
(check-single): New target.
(TEST_DIRS): New variable.
(TEST_TARGETS): Likewise.
(check-parallel): New target.
(check-gdb.%): New pattern.
(BASE1_FILES): New variable.
(BASE2_FILES): Likewise.
(check-gdb.base%): New pattern.
(%/.dir): New pattern.
* configure: Rebuild.
* aclocal.m4 (AM_CONDITIONAL): New defun.
* configure.ac: Check whether user is using GNU make.
(GMAKE): New conditional.

2009-06-29  Sami Wagiaalla  <swagiaal@redhat.com>

* dwarf2read.c (read_import_statement): Properly set import location
and destination.
* cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
inner, char* outer arguments. Updated callers.

2009-06-29  Sami Wagiaalla  <swagiaal@redhat.com>

* gdb.cp/namespace-nested-import.cc: New test.
* gdb.cp/namespace-nested-import.exp: New test.

* value.h (value_subscript, value_subscripted_rvalue,
value_bitstring_subscript, value_ptradd): Use LONGEST instead
of value as type of the index argument.
(value_ptrsub): Remove.
* valarith.c (value_subscript, value_subscripted_rvalue,
value_bitstring_subscript, value_ptradd): Use LONGEST instead
of value as type of the index argument.
(value_ptrsub): Remove.

* wrapper.h (gdb_value_subscript): Use LONGEST instead of
value as type of the index argument.
* wrapper.c (gdb_value_subscript): Likewise.

Update calls to gdb_value_subscript, value_subscript,
value_subscripted_rvalue, value_bitstring_subscript and
value_ptradd to use LONGEST instead of value as index
argument type.  Use value_ptradd instead of value_ptrsub.
* ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
ada_tag_name_2): Update.
* ada-tasks.c (read_atcb): Update.
* eval.c (evaluate_subexp_standard): Update.
* valarith.c (value_subscript): Update.
* gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
* gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
gnuv3_method_ptr_to_value): Update.
* jv-lang.c (evaluate_subexp_java): Update.
* m2-lang.c (evaluate_subexp_modula2): Update.
* python/python-value.c (valpy_getitem, valpy_binop): Update.
* wrapper.c (gdb_value_subscript): Update.
* varobj.c (c_describe_child): Update.

* gdbtypes.h (make_function_type): Remove OBJFILE parameter.
* gdbtypes.c (make_function_type): Remove OBJFILE parameter.
(lookup_function_type): Update call.
* stabsread.c (read_type): Likewise.
* dwarf2read.c (read_subroutine_type): Use lookup_function_type
instead of make_function_type.
* jv-lang.c (type_from_class): Likewise.  Do not allocate types
on the fake "dynamics" obstack.

* gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
and nodebug_tls_symbol members.
(struct objfile_type): New data structure.
(objfile_type): Add prototype.
* gdbtypes.c (gdbtypes_post_init): Remove initialization code
for types no longer in struct builtin_type.
(objfile_type_data): New static variable.
(_initialize_gdbtypes): Initialize it.
(objfile_type): New function.

* gdbtypes.h (builtin_type_error): Remove.
* gdbtypes.c (build_complex): Do not use builtin_type_error.
* symtab.c (builtin_type_error): Remove.
(_initialize_symtab): Remove initialization.

* stabsread.c (dbx_lookup_type, define_symbol, error_type,
rs6000_builtin_type, read_range_type): Use per-objfile types
instead of global or per-architecture builtin types.
* coffread.c (decode_type): Likewise.
* dwarf2read.c (read_array_type, read_tag_string_type,
new_symbol, die_type): Likewise.
* mdebugread.c (parse_symbol, basic_type, upgrade_type,
parse_procedure, psymtab_to_symtab_1): Likewise.
* xcoffread.c (process_xcoff_symbol): Likewise.
* parse.c (write_exp_msymbol): Likewise.

* stabsread.c (rs6000_builtin_type_data): New static variable.
(_initialize_stabsread): Initialize it.
(rs6000_builtin_type): Add OBJFILE argument.  Allocate builtin
types per-objfile instead of globally.

* stabsread.c (dbx_lookup_type): Add OBJFILE argument.  Use it
instead of current_objfile; pass it to rs6000_builtin_type.
(dbx_alloc_type, read_type, read_range_type): Update calls.
(cleanup_undefined_types_noname): Add OBJFILE argument and
pass it to dbx_lookup_type.
(cleanup_undefined_types): Add OBJFILE argument and pass it
to cleanup_undefined_types_noname.
* stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
* buildsym.c (end_symtab): Update call.

* darwin-nat-info.c (darwin_debug_regions_recurse): Use
target_gdbarch instead of current_gdbarch.

* Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
(ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
solib-darwin.o.

* configure.tgt: Add comment.

    * elf-m10300.c (mn10300_elf_relax_section): Allow for the
        different uses of the relocations addend when a symbol is in a
        merged section.

    PR 10288
        * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
        boundary between variaant and generic coprocessor instuctions.
        (coprocessor): Use it.
        Fix architecture version of MCRR and MRRC instructions.
        (arm_opcdes): Fix patterns for STRB and STRH instructions.
        (print_insn_coprocessor): Check architecture and extension masks.
        Print a hexadecimal version of any decimal constant that is
        outside of the range of -16 to +32.
        (print_arm_address): Add a return value of the offset used in the
        adress, if it is worth printing a hexadecimal version of it.
        (print_insn_neon): Print a hexadecimal version of any decimal
        constant that is outside of the range of -16 to +32.
        (print_insn_arm): Likewise.
        (print_insn_thumb16): Likewise.
        (print_insn_thumb32): Likewise.

        PR 10297
        * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
        of an undefined instruction.
        (arm_opcodes): Use it.
        (thumb_opcod): Use it.
        (thumb32_opc): Use it.

        Update expected disassembly regrexps in GAS and LD testsuites.

daily update

*** empty log message ***

ChangeLog:

2009-06-28  Paul Pluzhnikov  <ppluzhnikov@google.com>

* mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.

doc/ChangeLog:
2009-06-28  Paul Pluzhnikov  <ppluzhnikov@google.com>

* gdb.texinfo (GDB/MI Program Context): @ignore unimplemented
MI commands.
(GDB/MI Symbol Query): Likewise.
(GDB/MI File Commands): Likewise.
(GDB/MI File Transfer Commands): Likewise.
(GDB/MI Target Manipulation): Likewise.
(GDB/MI Miscellaneous Commands): Likewise.

gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions.  Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise.  Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise.  Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments.  Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames.  Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites.  Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame.  Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions.  Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function.  Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it.  Use block_static_block
and block_global_block.  Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.

gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it.  Move some
text to the new section.

gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.

* frame.c (frame_unwind_id): Renamed to ...
(frame_unwind_caller_id): ... this.  All callers updated.
(frame_pc_unwind): Renamed to ...
(frame_unwind_caller_pc): ... this.  All callers updated.
* frame.h: Document frame_unwind_caller_WHAT functions.
(frame_unwind_id): Renamed to ...
(frame_unwind_caller_id): ... this.
(frame_pc_unwind): Renamed to ...
(frame_unwind_caller_pc): ... this.
* hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
* stack.c (parse_frame_specification_1): Do not rely on
frame_unwind_id.

*** empty log message ***

daily update

* gdb.cp/exception.exp: Don't require $hex before inner frame in
backtrace.

2009-06-27  Michael Snyder  <msnyder@vmware.com>

* gdb.reverse: New directory.
* gdb.reverse/break-reverse.c: New test.
* gdb.reverse/break-reverse.exp: New test.
* gdb.reverse/consecutive-reverse.c: New test.
* gdb.reverse/consecutive-reverse.exp: New test.
* gdb.reverse/finish-reverse.c: New test.
* gdb.reverse/finish-reverse.exp: New test.
* gdb.reverse/machinestate.c: New test.
* gdb.reverse/ms1.c: New test.
* gdb.reverse/machinestate.exp: New test.
* gdb.reverse/Makefile.in: New file.
* gdb.reverse/shr2.c: New test.
* gdb.reverse/solib-reverse.c: New test.
* gdb.reverse/solib-reverse.exp: New test.
* gdb.reverse/step-reverse.c: New test.
* gdb.reverse/step-reverse.exp: New test.
* gdb.reverse/until-reverse.c: New test.
* gdb.reverse/ur1.c: New test.
* gdb.reverse/until-reverse.exp: New test.
* gdb.reverse/watch-reverse.c: New test.
* gdb.reverse/watch-reverse.exp: New test.
* configure.ac (AC_OUTPUT): Add gdb.reverse/Makefile.
* configure: Regenerate.

2009-06-27  Michael Snyder  <msnyder@vmware.com>

* infrun.c (handle_inferior_event): Improve handling of
reverse-stepping into and over shared library functions.

2009-06-27  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/10321
* bucomm.c (get_file_size): Return -1 on error.

* objcopy.c (copy_file): Report empty file.

bfd/

2009-06-27  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/10337
* elf.c (bfd_section_from_shdr): Don't change sh_link for
SHT_REL/SHT_RELA sections on executable nor shared library.
Treat SHT_REL/SHT_RELA sections with sh_link set to SHN_UNDEF
as a normal section.

ld/testsuite/

2009-06-27  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/10337
* ld-ifunc/binutils.exp: New.

2009-06-27  Kai Tietz  <kai.tietz@onevision.com>

* scripttempl/pe.sc (.debug_pubtypes): Fixed syntax error.
* scripttempl/pep.sc (.debug_pubtypes): Likewise.

daily update

*** empty log message ***

2009-06-26  Kai Tietz  <kai.tietz@onevision.com>

        * scripttempl/pe.sc (.debug_pubtypes): Added section rule.
        * scripttempl/pep.sc: Likewise.

* Makefile.def (host_modules): Add cgen.
* Makefile.in: Regenerate.
* configure.ac (host_tools): Add cgen.
* configure: Regenerate.

* gdb.base/psymtab.exp: Turn off pending breakpoints.